VO-LED
Job Name
SERIES
Catalog Number
Type
Notes
L E D
V O Y A G E R
Units with emergency battery are U.L. listed as
emergency lighting and power equipment (U.L.-924)
when equipped with specific optional battery back-up
and meet requirements of the life safety code/NFPA101,
NEC/OSHA and most state and local codes.
Occu-smart bi-level LED lighting complies with ashrae 90.1-2010 and
meets the requirements of NYC Local law 47
*Units must be correctly adjusted to provide required minimum light levels
(5000K LED units will charge most photoluminescent tape products)
f e a t u r e s
■
■
■
■
A unique bi-level LED luminaire
controlled by an integral ultra-sonic
motion sensor, designed to provide
safe, dependable illumination while
conserving energy. Suitable for
ceiling or wall mounting
Bi-level fixtures operate at a low
standby light level, offering safety
and security with full light output
instantly upon occupancy with areas
fully lit only as needed
Ideal for stairwells, restrooms,
laundry rooms and other areas where
maximum light levels are not required
on a constant basis
For safety and compliance purposes
in areas designated as emergency
egress, we recommend choosing a
standby light level that will provide
minimum code compliant light levels
while in the standby mode. In most
municipalities, this is 1 FC average
See back for options
finish
■
Painted with a lighting grade baked
white enamel, having a reflectance
factor exceeding 87% for premium
quality and durability
RRU-2 emergency shunt relay
(see options on back)
construction
■
■
■
■
■
Housings are die-formed of code
gauge steel
Quality construction throughout for
long-term dependable service
Ends are die formed for a clean,
smooth look
Ample knockouts are provided for
convenient mounting with recessed
or surface power feeds
Meets ADA requirements for wall
mounting
diffuser
■
■
One-piece extruded frosted linear
ribbed acrylic is standard - see back
for options
■
■
■
■
■
■
Grooved formation on the edges allow
for a tight, no light leak attachment to
the body
■
High quality LED light engines from
leading manufacturers are used in all
LaMar LED fixtures - see chart on
back for energy and lumen chart
■
LED
■
electrical
R
Due to the rapid advancements in LED technology, please
consult our website for the most current technical data.
All fixtures are U.L. listed and IBEW
union made
Universal voltage 120-277V
sensor
Emergency backup units available
with UL 924 listing (emergency
lighting and power equipment) and
require specific LED components see ordering code
High frequency, extremely sensitive
ultra-sonic, internally mounted
LED status indicator light
Fail-safe feature switches light level to
high (100%) if sensor is physically
damaged
5 minute walk-test feature, easy-set
time and sensitivity controls,
compact design
Time delay adjustable to 5, 10, 15 or
30 minutes
warranty
■
5 years - part replacement only
(Please see our Terms & Conditions
page at www.lamarlighting.com
for details)
Revised
7/16
Occu-smart is a registered trademark of LaMar Lighting Co., Inc.
LaMar Lighting assumes no responsibility for misapplication of fixtures
■
All electrical components are
U.L. listed or recognized
DE IN THE
MA
USA
V OS E- RL
ED
IES
ordering g u i d e
LED VOYAGER
VOL
SERIES
SIZE
VOL
24 - 2’
48 - 4’
72 - 6’
96 - 8’
POWER
L - Low
M - Medium
H - High
LENS
OPTIONS
STANDBY
OPTIONS
FA - Frosted acrylic (std)
PF - Perforated metal - white
COLOR
TEMP
FO - Full on/off operation
AS - User selectable standby options
5, 10 & 30% nominal light output
GENERAL
OPTIONS
30 - 3000K
35 - 3500K
40 - 4000K
50 - 5000K
EM - Emergency pack, >90 min., >500 lumens
EM9 - Emergency pack, UL 924 approved
>90 min., >1000 lumens
RRU21 - 120V emergency shunt relay (must specify)
RRU27 - 277V emergency shunt relay (must specify)
Consult factory for additional options not shown or listed
AS - Adjustable standby models are DesignLights Consortium® qualified
dimensional data
NOTE: SPECIFICATIONS AND DIMENSIONAL DATA
ARE SUBJECT TO CHANGE WITHOUT NOTICE
BEFORE INSTALLATION, PLEASE CONSULT YOUR
LOCAL ORDINANCES AND BUILDING CODES FOR
COMPLIANCE
cross sections
Fixtures with high frequency or ultra-sonic sensors
should be rigedly mounted in wind prone areas
3.99
2”
2”
0.25”
4 MODEL
48”
Note for glow in the dark exit signs, tapes and other
similar products: many phosphorescent materials may
not properly charge under LED light. It is the
responsibility of the end user to determine
suitability of the product for their specific application
1.125”
24”
.875 KO
3.5”
.960 K.O.
MOUSE HOLE
TYP
7.8”
4X
0.25”
36”
6”
LED Wattage Chart (5000K)
2’ (1 Board)
AS
4’ (2 Boards)
AS
8"
6”
Calculated TM-21
0.25”
Low (L)
Medium (M) - Std
High (H)
15W - 1627 lu
. 23W - 2552 lu
28.5W - 2871 lu
3W/4W/5W
4W/5W/8W
5W/6W/9W
24.5W - 3138 lu
43W - 5018 lu
55W - 5978 lu
6W/8W/10W
8W/10W/16W
10W/12W/18W
** AS versions shown as 5%, 10% and 40% dim
2’
4’
Projected
Reported
Projected
Reported
Low Output
168,000 Hrs
> 60,000 Hrs
168,000 Hrs
> 60,000 Hrs
Med Output
168,000 Hrs
> 60,000 Hrs
168,000 Hrs
> 60,000 Hrs
High Output
134,000 Hrs
> 60,000 Hrs
146,000 Hrs
> 60,000 Hrs
The UL924 listed RRU-2 emergency shunt relay allows emergency luminaires controlled by a 0-10V
driver or ballast to be automatically illuminated to full brightness during a utility power failure or room
power interruption.
This requires the luminaire to be connected to a generator or invertor protected circuit and the control
module to be connected to a standard ‘always on’ circuit.
LaMar Lighting assumes no responsibility for misapplication of fixtures
Due to the rapid advancements in LED technology, please
consult our website for the most current technical data.
LAMAR LIGHTING 485 Smith Street, Farmingdale, NY 11735
L70C 25 C Ambient
Revised
7/16
• Tel (631) 777-7700
Fax (631) 777-7705 • Outside NY (800) 724-7743 • www.lamarlighting.com
R
Scan QR code
to be directed
to our
home page!
Protected by one or more US Patents
Nos. 7,271,543 & 7,081,715