HORNET® HIGH POWER
HORNET-HP-SR-3
3LT LED
SEMI-RECESSED MULTIPLE 3 LIGHT LED
APPLICATION:
Accent and display lighting for retail, commercial and hospitality environments
CONSTRUCTION:
Stamped steel mounting frame w/integral mounting bars
Thermally protected
Steel driver housing
Steel upper housing and laser cut trim ring
Complete die-cast optical head construction
No exposed wiring
Powder coat paint
ELECTRICAL:
Electronic constant current LED driver, 120v or 277v input
Dimming options available for ELV, Triac, 0-10v and
Lutron systems. See following pages for more information.
This product complies with IEEE C62.41 for surge endurance
up to 2.5KV. Amerlux® recommends using additional surge
protection with this unit (supplied by others), surge damage is
not covered by warranty.
OPTICS:
0-40º tilt, 360º+ rotation
Available in a variety of beam spreads
LED:
Color Temp Options: 2700K, 3000K, 3500K, 4000K
CRI: 85 typ. (2700K, 3000K, 3500K, 4000K)
90+ typ. (3000K)
Life: 50,000 hrs
Binning: 3 MacAdam
Lumen Maintenance: >70% of initial lumens @ 50,000 hrs
Lumen Output (per head,3000K):
15w: Spot 835 typ.
18w: Spot 1002 typ.
Flood 792 typ.
Flood 950 typ.
Wide Flood 783 typ.
Wide Flood 940 typ.
PROJECT:
MOUNTING:
For use in T-grid or sheet rock ceilings, max thickness 1”
LABELING:
TYPE:
For indoor use only
9 3/16”
14 /2” min - 25” max
4 1 /2 ”
1
Electrostatic sensitive device,
observe precautions for
handling
16 5/16”
40º
13 3/4”
15 1/4”
21 1/2”
Accessory Options:
4 7/8”
Ceiling Cut Out Dimension: 5 9/16” x 14 13/16”
ELECTRICAL
3x15
3x18w
System
System
Driver
Watts Amps Watts Amps
Electronic 120v 45
0.375
54
0.45
277v 45
0.16
54
0.19
Accessory Holder
5
/8”
(max 1”)
40º
Snoot Accessory Holder
4 1/2”
6”
(see website for details)
ORDERING INFORMATION:
FRAME
Model
#
Lamp Voltage
Heads Type
HORNET-HP-R/SR-FRAME 3
TRIM
Model
LED
120
277
Options
HILUME
0-10V
EM (1 head)
Wattage Lamp Housing/
#
Type Head Finish
Heads
HORNET-HP-SR-TRIM 3
15
18
** NOTE: 3000-90CRI & accessories
are not Energy Star rated.
LED
Complete Unit Specification:
HORNET-HP-R/SR-FRAME-3-LED-120/HORNET-HP-SR-TRIM-3-18-LED-WT-120-277-FL-FL-FL-WT-3000
Frame Only: HORNET-HP-R/SR-FRAME-3-LED-120
Trim Only: HORNET-HP-SR-TRIM-3-18-LED-WT-120-277-FL-FL-FL-WT-3000
Voltage Beam Spreads*
Trim
Head 1 Head 2 Head 3 Finish
WT - white
120-277 NSP
texture
SP
BT - black
NF
texture
MFL
ST - silver
FL
texture
WF
__ - ________
VWF
(other RAL)
LS
NSP
SP
NF
MFL
FL
WF
VWF
LS
NSP
SP
NF
MFL
FL
WF
VWF
LS
WT - white
texture
BT - black
texture
ST - silver
texture
Color
Temp
Options/Accessories**
SNAH - snoot accessory holder, 1” length, matte black
interior, specify exterior color (WT, BT, ST), accepts
cross blade plus 2 additional forms of media
AH - accessory holder, specify finish (WT, BT, ST),
accepts 2 forms of media
3000-90** CB - cross blade, matte black finish, requires snoot
+
(90 CRI) HEX - hexcell louver (1/8” x 1/8”), requires AH or SNAH
DIM-ELV - ELV dimming (120v only)
DIM-TRIAC - Triac dimming (120v only)
HILUME - Lutron Hi-lume® dimming driver
0-10V - 0-10v dimming
*NSP - narrow spot 12º, SP - spot 15º, NF - narrow flood 20º, MFL - medium flood 24º,
FL - flood 28º, WF - wide flood 45º, VWF - very wide flood 60º, LS - linear spread 60ºx10º CP - Chicago Plenum
EM - emergency battery back (1 head)
Cat #:
Amerlux reserves the right to change details that do not affect overall function and performance.
Amerlux®, LLC • 178 Bauer Dr, Oakland, NJ 07436 • P: 973.882.5010 F: 973-882.2605 • www.amerlux.com
2700
3000
3500
4000
HORNET® HIGH POWER
HORNET-HP-SR-3
3LT LED
SEMI-RECESSED MULTIPLE 3 LIGHT LED
TYPE:
FIXTURE DATA: For 15w data, multiply by 0.83
Complete photometric data (ies format) available upon request.
NOTE: Fixture data per head
18W LED
SPOT (SP)
DISTRIBUTION
LTL #33656
180
FLOOD (FL)
DISTRIBUTION
LTL # 33659
120
150
ACROSS
45
ALONG
180
150
ACROSS
45
ALONG
90
WIDE FLOOD (WF)
DISTRIBUTION
LTL # 33660
180
120
ACROSS
45
ALONG
90
90
2200
350
1000
60
60
60
4400
2000
700
6600
3000
1050
0
0
30
Candelas at Nadir
Deg
Candela
0
7886
5
6385
15
1003
25
196
35
82
45
32
APPLICATION DATA:
120
150
0
30
30
Candelas at Nadir
Deg
Candela
0
1255
5
1217
15
950
25
570
35
259
45
98
Candelas at Nadir
Deg
Candela
0
3404
5
3065
15
1371
25
348
35
103
45
47
D
Notes and Definitions:
Beam spread is to 50% center beam candlepower (CBCP).
D=Distance to floor or wall.
FC=Footcandles on floor or wall at center beam aiming location.
L=Effective Visual Beam length in feet (50% of maximum footcandle level).
W=Effective Visual Beam width in feet (50% of maximum footcandle level).
CB=Distance across or down to center beam location.
CB
30°
30°
D
FC
W
W
FC
CB
L
30o Aiming Angle
Horizontal
Footcandles
30o Aiming Angle
Vertical
Footcandles
60o Aiming Angle
Vertical
Footcandles
60°
60º
SPOT
30º30°
L
D
5.0’
7.5’
10.0’
12.5’
FC
192
106
64
43
L
1.8
2.6
3.2
3.9
W
1.8
2.6
3.2
3.9
D
5.0’
7.5’
10.0’
12.5’
FC
143
73
43
28
L
2.3
3.2
4.9
5.1
W
2.1
2.9
4.3
4.6
CB
3.0
4.0
5.0
7.0
D
3.0’
4.0’
5.0’
6.0’
FC
118
69
45
29
L
2.9
3.7
4.7
5.8
W
1.5
2.2
2.8
3.4
CB
4.0
6.0
7.0
9.0
D
3.0’
4.0’
5.0’
6.0’
FC
441
290
186
129
L
1.3
1.7
2.1
2.4
W
1.1
1.3
1.6
2.0
CB
2.0
2.0
3.0
3.0
FLOOD
30°
30º
W
FC
D
5.0’
7.5’
10.0’
12.5’
FC
102
51
30
19
L
2.6
3.5
4.6
5.7
W
2.6
3.5
4.6
5.7
D
5.0’
7.5’
10.0’
12.5’
FC
70
35
21
13
L
3.2
4.4
5.7
7.1
W
2.9
3.9
5.1
6.4
CB
3.0
4.0
5.0
6.0
D
3.0’
4.0’
5.0’
6.0’
FC
54
33
21
15
L
3.8
4.8
6.0
7.3
W
2.6
3.2
4.0
4.7
CB
4.0
5.0
7.0
8.0
D
3.0’
4.0’
5.0’
6.0’
FC
203
137
82
61
L
2.1
2.2
3.0
3.4
W
1.5
1.9
2.7
3.0
CB
2.0
2.0
3.0
3.0
WIDE
FLOOD
0o Aiming Angle
Horizontal
Footcandles
D
5.0’
7.5’
10.0’
12.5’
FC
43
20
12
8
L
3.8
5.7
7.6
9.5
W
3.8
5.7
7.6
9.5
D
5.0’
7.5’
10.0’
12.5’
FC
33
15
8
6
L
4.4
6.4
8.6
10.9
W
4.2
6.1
8.1
10.4
CB
2.0
3.0
4.0
5.0
D
3.0’
4.0’
5.0’
6.0’
FC
32
19
13
9
L
4.0
5.2
6.5
7.9
W
3.4
4.4
5.4
6.5
CB
3.0
4.0
5.0
5.0
D
3.0’
4.0’
5.0’
6.0’
FC
97
53
36
24
L
2.6
3.5
4.3
5.2
W
2.4
3.3
4.0
4.9
CB
1.0
2.0
2.0
2.0
Amerlux®, LLC • 178 Bauer Dr, Oakland, NJ 07436 • P: 973.882.5010 F: 973-882.2605 • www.amerlux.com
L
LIT-1237 rev 11/14
HORNET® HIGH POWER
HORNET-HP-SR-3
3LT LED
SEMI-RECESSED MULTIPLE 3 LIGHT LED
TYPE:
DIMMING COMPATIBILITY:
Amerlux® “Hornet” fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below
for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the
exact full configuration (Dimmer, Fixture Quantity, Voltage, etc) may affect dimming performance.
TRIAC (Forward Phase) DIMMING (-DIM-TRIAC Option) ---not compatible with 12w module--Utilizes “Standard” incandescent dimmers that are in wide use in installations across the US. Best for retrofit applications
where Triac dimmers are installed.
Wiring Diagram
Notes:
• 120v ONLY
Driver
Triac
• Dims down to less than 5% light output (most cases)
Black Black
Dimmer
LED
• Consult Dimming manufacturer for installation
RED
White
(by
others)
instructions - DO NOT SHARE NEUTRALS!
Green
• Must meet dimmer Minimum Load Requirements
per dimming manufacturer
120v
Compatible Dimmers
Wall Box (Incandescent Style, Wattage as required)
Central System
Lutron “Diva”
Lutron “Vareo”
ETC “SR” Rack w/D20
ETC “DRD” Rack w/D20
Lutron “Nova-T”
Lutron “Skylark”
Module
Module
Lutron “Maestro”
Lutron “GP” Panel
Lutron Grafix Eye QS
ELV - Electronic Low Voltage (Reverse Phase) DIMMING (-DIM-ELV Option)
Utilizes specialized “ELV” dimmers. Best for New Construction applications
Notes:
• 120v ONLY
• Dims down to less than 5% light output (most cases)
• Consult Dimming manufacturer for installation
instructions - DO NOT SHARE NEUTRALS!
• Must meet dimmer Minimum Load Requirements
Wiring Diagram
ELV
Dimmer
(by others)
Driver
Black Black
RED
White
Green
LED
120v
Compatible Dimmers
Wall Box (ELV Style)
Lutron “Diva”
Lutron “Nova-T”
Lutron “Maestro”
Leviton “Surslide”
Lutron “Vareo”
Lutron “Skylark”
Leviton “Vizio”
Central System
ETC “SR” Rack w/ELV10
Module
Lutron “GP” Panel with
PHPM-PA Interface
ETC “DRD” Rack w/ELV10
Module
Lutron Grafix Eye QS with
PHPM-PA Interface
0-10V - DIMMING (-0-10V Option)
Integrates into a variety of building management and daylighting controls
Wiring Diagram
Notes:
• 120v - 277v
• Dims down to less than 10% light output
• Requires interface to turn off power to driver
• Consult Dimming manufacturer for installation
instructions - DO NOT SHARE NEUTRALS!
Compatible Dimmers
Wall Box
Lutron “Diva” - DVTV with
PP-120H Interface
Leviton Renoir II 0-10v
0-10v
Dimmer
Bldg
Power or
Interface
Driver
Violet Black
RED
Grey
LED
Black
White
Green
Central System
Lutron Grafix Eye with
GRX-TVI Interface
Amerlux®, LLC • 178 Bauer Dr, Oakland, NJ 07436 • P: 973.882.5010 F: 973-882.2605 • www.amerlux.com
LIT-1237 rev 11/14
HORNET® HIGH POWER
HORNET-HP-SR-3
3LT LED
SEMI-RECESSED MULTIPLE 3 LIGHT LED
TYPE:
LUTRON HI-LUME / ECO-SYSTEM (-DIM-HILUME Option)
Integrates into a variety of building management and daylighting controls
3-Wire Wiring Diagram
Notes:
• 120v or 277v
Driver
• Dims down to less than 5% light output
3-Wire FL
Black
Switched Hot
• May use 3-Wire or Ecosystem Control
Control
Orange
Dimmed Hot
• Consult Dimming manufacturer for installation
(by others)
White
Neu
instructions - DO NOT SHARE NEUTRALS!
Green
Gnd
Purple/Grey E2
Purple
E1
Compatible Dimmers
Wall Box (3-Wire Fluorescent)
ECO-Sys Bus
DIVA
Cap Wires
Maestro
Nova T
ECO System Digital Control Wiring
Vareo
Cap Lead
Central System
Lutron ECO-System compatible controls
ETC “SR” Rack w/D20F Module
ETC “DRD” Rack w/D20F Module
ECO
System
Control
(by others)
Black
Orange
White
Green
Purple/Grey
Purple
VV+
Driver
Switched Hot
Dimmed Hot
VV+
Black
RED
LED
Black
RED
LED
Neu
Gnd
E2
E1
ECO-Sys Bus
Amerlux®, LLC • 178 Bauer Dr, Oakland, NJ 07436 • P: 973.882.5010 F: 973-882.2605 • www.amerlux.com
LIT-1237 rev 11/14