1 A Supply of PVC flexible cable multistrand

advertisement
Tender No. 12/2014/NGP/S&T/SM's slide/Mis dt. 26.05.2014
Name of work : Replacement of SM slide at LC gate & provision of electrical lifting barriears at various LC gate & other
mislanous signalling works on Nagpur division.
S
SN C
H
Description
Unit
Qty
Rate
Amount
MS
Insp.
by
Schedule A (Supply portion)
1 A Supply of PVC flexible cable multistrand wire copper Km.
conductors cross section 6 Sq. mm as per spec. IRS: 76/89
with latest amendment if any.
3
54643.68
163931.04 17
RDSO
2 A Supply of PVC flexible cable multistrand wire copper Km.
conductors cross section 10 Sq. mm as per spec. IRS: 76/89
with latest amendment if any.
3
86008.00
258024.00 18
RDSO
3 A Supply of PVC flexible cable multistrand wire copper Km.
conductors cross section 16 Sq. mm as per spec. IRS: 76/89
with latest amendment if any.
3
127196
381588.00 19
RDSO
4 A Supply of program switches with acrylic cover, snap action, No.
base mounting type along with cover and mounting bracket
25 A-9 pole 3 position Siemens type. (3 LAO-25/9Y)
32
4012.00
128384.00 26
Consign
ee
5 A Supply of QNA1 AC immunised relay, 8F-8B, 24VDC along No.
with plug board, retaining clip and connectors conforming to
BRS:931A,IRS:S60,IRS:S34 & IRS:S23.
6 A Supply of Q series AC LED ECR as per RDSO spec no. No.
STS/Relay/AC LIT LED Signal/09-2002, complete with plug
board, retaining clip & connectors.
197
2676.49
527268.53 79
RDSO
30
2458.72
73761.60 93
RDSO
7 A Supply of fail safe electronic flasher device 24V DC or 60V No.
DC as per RDSO spec no. RDSO/SPN/173/2002.
21
11673.48
245143.08 97
8 A Supply of indicative type of fuse inserts
109
Consign
ee
Consign
ee
With holder 1.6 A.(System,Rapid,Malnad,Rbco make or No.
similar)
300
52.42
15726.00
a
With holder 0.6 A.(System,Rapid,Malnad,Rbco make or No.
similar)
Without holder 1.6 A.(System,Rapid,Malnad,Rbco make or No.
similar)
300
50.23
15069.00
b
1000
14.20
14200.00
d
300
14.20
4260.00
e
43
813.54
34982.22 111
Consign
ee
No.
43
42.59
1831.37 112
Consign
ee
11 A Supply of phenolic 10 mm thick sheet, grade P3 in standard No.
size of 1.22X1.22 mtr. as per spec no. IS 2036 of 1974.
24
3439.80
82555.20 149
Consign
ee
Without holder 0.6 A.(System,Rapid,Malnad,Rbco make or No.
similar)
9 A (a) Supply of rosin cored solder wire as per spec no. Kg.
IS:1921-1975 with alloying element percentage as 63%
SN(Tin)/37% Pb(Lead) with percentage of various impurities
not
exceeding
the
value
Sb(Antimony)
0.20
maximum,Cu(Copper)0.1% maximum, As(Arsenic) 0.05%
maximum, Fe(Iron) 0.02% maximum & other impurities
mainly AL,Zn, & Cd shall be limited. (b) The flux shall be
free from corrosive action as per clause 5.2 & flux
percentage may be used as per requirement.
10 A Lacing thread rolls, black, wax coated. (100 mtrs.)
Contractor
12/2014/SMs slide Misc
DSTE/N
S
SN C
Description
Unit Qty
H
12 A Supply of cartridge fuse block made of PBT as per RDSO drg No.
1500
no. SA-23748 Alt. 4 & spec no. IRS S 75/2006 with latest
amendment. Fuse block shall be suitable for round head
type voltage fuses.
13 A Supply of channel pins single groove, galvanised, 7 mm No. 100000
suitable for 4 mm dia bonding wire as per spec no. IRS S
17 & RDSO drg no. S-69/M.
Rate
Amount
MS
Insp.
by
97.95
146925.00 151
RDSO
1.22
122000.00 162
Consign
ee
14 A Supply of PVC jacketed wire rope for track lead connections. Mtr.
PVC jacketed wire rope should be of galvanised steel wire
rope 6 mm dia (6x19 stranded wire with steel core of 6 mm
dia) sheathed with PVC 2 mm wall thickness, overall
thickness being 10 mm. PVC sheath should be made of type
6 compound as per IS 5831 of 1970. Reclaimed or recycled
material should not be used.
30000
31.58
947400.00 163
Consign
ee
15 A Supply of 8 SWG GI wire (4mm dia) suitable for track circuit Kg.
rail bonding.
10000
52.05
520500.00 164
Consign
ee
16 A Supply of DWC HDPE pipe with one snap fit coupler and 'O' Mtr.
ring conforming to IS 14930 (part 2 : 2001), non metallic,
normal duty, pliable, with protection against chemical attack
and non-flame propagaing, anti rodent, in 6 meter length of
size 120 mm outer dia & 103 mm inner dia. in orange colour
only(per mitted tolerance in dia +/- 3 mm)
1050
194.96
204708.00 178
RITES
Total of Schedule A
3888257.04
Schedule B (Execution portion)
1 B Installation of relay rack assembly including IDF pillars if any No.
complete with wall supports, scaffolding, ladders, runway
for cables, relay/relay group base plates, fixing of tag blocks
etc. The work shall be done as per approved plan, extant
practice on C. Railways & the instructions of Rly. engineer at
site.
2 B Fabrication and fixing of phenolic laminated sheet in location
box by providing all fixtures as per Railway drawing
including fixing of PVC coated string rods at the back side
for cable support with contractor's own materials. The work
shall be done as per drg. and arrangement similar to SK 7831/2 with latest alterations & as per instructions of Rly.
engineer at site.
Single case
9
968.60
No.
24
1444.72
3 B Termination of cable cores on ARA terminal/fuse blocks, 8 Per
way terminals block, wago terminal in the apparatus cond
uctor
cases/cable termination rack.This includes all associated
works of pulling out the cable from underground. The work
shall be done as per location plans and instructions of Rly.
engineer at site.
3429
6.55
4 B Excavation and casting of apparatus case foundation with
contractors anchor bolts, cement, ballast and other
materials.
Single case as per drg no. SK 748.
No.
Contractor
12/2014/SMs slide Misc
24
6179.62
8717.40
34673.28
1
Consign
ee
35
Consign
ee
a
22459.95 38
Consign
ee
40
Consign
ee
148310.88
i
DSTE/N
S
SN C
Description
Unit
H
5 B Erection of apparatus cases. This includes filling of location
foundations with river bed sand and plastering on top of the
sand
Single case
Qty
Rate
Amount
Insp.
by
41
Consign
ee
No.
24
706.52
6 B Excavation of cable trench as per cable route plan,1.0 mtr. Mtr.
deep and 300mm wide along side the track in normal
soil/strata, conforming to distances as per cable route plan
and refilling after cable laying. This work includes covering
of cable laid in trench by loose soil for a layer of 50mm
thickness
approximately
before
covering
by
stones/bricks,clearing of route, bushes etc. The work shall
be done as per the extant practice on Central Railway and
instructions of Railway engineer at site. In case depth of
trench is not achievable due to site conditions proportionate
payment will be made.
5000
30.58
152900.00 49
Consign
ee
7 B Cutting of all types of roads/platforms preparatory to Mtr.
trenching and excavation to depth of 300mmx300mm wide
approximately and refilling after laying of RCC/GI/DWC pipe
& to restore them to original condition.The work shall be
done as per extant practice on C.Rly. & instructions of Rly.
engineer at site.
200
115.75
23150.00 52
Consign
ee
8 B Fixing of GI pipes for crossing the culverts, bridges etc. and Mtr.
concreting of ends with brick masonry at both ends as per
the instruction of Rly. engineer at site.
50
44.77
2238.50 53
Consign
ee
9 B Excavation of cable trench 1mtr. deep and 300mm wide Mtr.
across the track, for track crossing and refilling. The work
shall be done as per extant practice on C. Rly. & instruction
of Rly. engineer at site.
50
69.89
3494.50 54
Consign
ee
10 B Laying of DWC/RCC/GI pipes alongwith collars in trenches Mtr.
at places of track and road crossings, platform cuttings etc.
1050
33.33
34996.50 55
Consign
ee
11 B Laying of signalling/power/telecom cable of various Km.
cores/sizes in trenches.
12 B Installation, testing and commissioning of electrically Set
operated lifting barrier, complete with casting of cement
concrete foundation for pedestal and boom rest post,
cabling power supply connection & wiring with complete
outdoor work.
25
3332.78
83319.50 60
Consign
ee
4
7892.98
31571.92 76
Consign
ee
Total of Schedule B
16956.48
MS
i
562788.91
Total of Schedule A + B (MS items)
4451045.95
Schedule C (Non schedule items)
1 C Supply of relay AC immune plug-in-type style QNA1K neutral No.
line tractive armature 24 V DC 1000 Ohms 6F-6B contacts
front and back contacts metal to carbon complete with plug
board retaining clip and connectors confirming to IRS S34 &
S23 & BRS 931A, IRS S60, interlocking code CDEKY.
60
2710.56
162633.60 NS
2 C Supply of HSS parallel shank twist drill of 7.14mm dia.(box
of 10 no. each)
80
729
58320.00 NS
Contractor
Box
12/2014/SMs slide Misc
RDSO
Consign
ee
DSTE/N
S
SN C
Description
Unit
H
3 C Supply of electrically operated lifting barrier complete Set.
without hand generator, operating on 110V AC with
motorised boom locking, octagonal GI booms of length 9.76
m as per RDSO drawing no. S-11600, with circuit controller
in place of limit switch, MS counter weight, stop board etc.
with one spare boom confirming to RDSO/SPN/208/2012
with latest amendments.
Qty
Rate
Amount
MS
Insp.
by
RDSO
5
271722.39
1358611.95 NS
4 C Supply of multi strand single core flexiable cable of 16/0.2 Km.
mm as per IRS 76/89 with latest amendment, if any.
15
4303.57
64553.55 NS
Consign
ee
5 C Design, fabrication and supply of gate indication panel in No.
gateman's hut/ASM's operating panel, made of 16 SWG
powder coated MS sheet of size 60 cm x 35cm x 15 cm
(approximately) consisting of different colour LEDs with
holders suitable to work on 24 V DC to 28 V DC supply, 2
position/way 2 nos. rotary switches (4NO,4NC) to control UP
and DN signal etc. indications on the front face of the panel
will be provided as per site conditions which will be advised
by the engineer in charge of the work which has be to
confirmed before carrying out the work of screen printing
the indication panel. All description on the front panel are
to be screen printed.
18
7906.08
142309.44 NS
Consign
ee
6 C Supply of 4 conductor disconnecting terminal blocks, along No.
with din rail, end plates & end stops. The disconnecting
terminal block to suitably fixed on din rail on phenolic
laminated sheet with provision of two additional holes on
the board on either side for cable entry, as per
RDSO/SPN/189/2004. Details of part items are as under,
end plates : 350 nos. din rail : 35 mtrs. end stopper : 350
nos. quick marker system : 35 nos. ( 10 of 10)
3429
61.85
212083.65 NS
RDSO
Total of Schedule C
1998512.19
Total of Schedule A + B (MS items)
4451045.95
Total of Schedule A + B + C
6449558.14
SSE/S/Works
DSTE/N
QUOTING OF RATES
1 Tenderer should quote % above or at par or below the Raiway's total combined for schedule 'A', 'B' and 'C'.
2 Write percentage both in figures and in words. In case of discrepaccies between the rate quoted in figure and
words, the rate rate quoted in words will prevail/final.
3 Tenderer should sign the following certificate :
I/we offer and agree to execute the above work at…………………….......% (in figures)i.e…………………………………….
percent (in words) ………………………………………………..(write above or at par or below) the total
combined tender schedule cost of schedule A, B & C i.e.
6449558.14
Note :
1 Tenderers are requested to quote the rates inclusive of all taxes and duties such as Sales Tax/Vat, Service Tax,
Octroi, royalties or any other taxes, and duties whatsoever leviable by Government (State or Central) or any
statutory body.
Contractor
12/2014/SMs slide Misc
DSTE/N
S
Insp.
SN C
Description
Unit Qty
Rate
Amount
MS
by
H
2 Tenderer conditions regarding extra payment on above account will not be considered and rates quoted by the
tenderer will be taken as rates inclusive of all taxes and duties as leviable by Government (State or Central) or any
body.
3 It shall be the responsibility of the contractor to obtain Service Tax Registration number and deposit the service tax
(if applicable) to the Custom & Excise Department.
4 Railways shall not be liable for any claims/arrears raised by Tax Authorities.
5 The contractor shall indemnify Railways for any claims/arrears raised by Tax Authorities.
Contractor
12/2014/SMs slide Misc
DSTE/N
S
SN C
H
Contractor
Description
Unit
12/2014/SMs slide Misc
Qty
Rate
Amount
MS
Insp.
by
DSTE/N
Download