CENTURY L E G E N D A R Y ® L E A D E R S H I P OWNER’S MANUAL CENTURY ® L E G E N D A R Y L E A D E R S H I P OWNER’S MANUAL INDUSTRIAL SERIES 30 LCG SUPER SINGLE INDUSTRIAL SERIES 30 LCG SUPER SINGLE INSTALLATION, OPERATION, MAINTENANCE & PARTS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities. NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities. CENTURY® CENTURY® Miller Industries Towing Equipment Inc. 8503 Hilltop Drive Ooltewah, Tennessee 37363 Phone (423) 238-4171 • FAX (423) 238-5371 Miller Industries Towing Equipment Inc. FORM NO. 0540015 REV. 6/10 PRICE $25.00 8503 Hilltop Drive Ooltewah, Tennessee 37363 Phone (423) 238-4171 • FAX (423) 238-5371 FORM NO. 0540015 REV. 6/10 PRICE $25.00 X Section VI - PARTS Section VI - PARTS This Section is provided by the manufacturer for the purpose of ordering any component part of the Industrial LCG Series Car Carrier that may be required when part replacement is necessary. Be certain to use only original equipment replacement parts for warranty purposes as well as for keeping your Industrial LCG Series Car Carrier in its original state and optimum operating capacities. This Section is provided by the manufacturer for the purpose of ordering any component part of the Industrial LCG Series Car Carrier that may be required when part replacement is necessary. Be certain to use only original equipment replacement parts for warranty purposes as well as for keeping your Industrial LCG Series Car Carrier in its original state and optimum operating capacities. When ordering replacement or spare parts be sure to provide the following information to your carrier manufacturer authorized representative. When ordering replacement or spare parts be sure to provide the following information to your carrier manufacturer authorized representative. 1. 2. 3. 4. 5. 6. 7. Manual Number & Date of Publication Manual Page Number Page Title Reference Number of Part Desired Part Number Part Description Quantity of Part Desired 1. 2. 3. 4. 5. 6. 7. Manual Number & Date of Publication Manual Page Number Page Title Reference Number of Part Desired Part Number Part Description Quantity of Part Desired Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner without delay. Should additional information be required for repair or replacement of certain components, contact Miller Industries, Hermitage, PA, Phone: 724-981-3328, FAX 724-981-5260. Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner without delay. Should additional information be required for repair or replacement of certain components, contact Miller Industries, Hermitage, PA, Phone: 724-981-3328, FAX 724-981-5260. The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may change the specifications, models and feature availability. The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may change the specifications, models and feature availability. VI-1 VI-1 Section VI - PARTS (cont'd) Section VI - PARTS (cont'd) SERIES 30 INDUSTRIAL LCG BED ASSEMBLY REMOVABLE TUBE RAIL SERIES 30 INDUSTRIAL LCG BED ASSEMBLY REMOVABLE TUBE RAIL NOTES: 1. To order a replacement bed, provide the carrier serial number. Serial number look-up provides construction information about the bed regarding length and width as well as options such as floor plate, style of sides, winch and number of chain-locks. 2. The mounting location of the slideback cylinder on the bed correlates to the subframe geometry, which is built to fit the chassis upon which it is mounted. NOTES: 1. To order a replacement bed, provide the carrier serial number. Serial number look-up provides construction information about the bed regarding length and width as well as options such as floor plate, style of sides, winch and number of chain-locks. 2. The mounting location of the slideback cylinder on the bed correlates to the subframe geometry, which is built to fit the chassis upon which it is mounted. VI-2 VI-2 Section VI - PARTS (cont'd) SERIES 30 INDUSTRIAL LCG BED ASSEMBLY REMOVABLE TUBE RAIL REF. NO. QPU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 1 1 1 2 1 1 1 1 1 1 1 2 2 2 6 2 2 1 2 6 8 PART NUMBER 3028430LDXXX-FW1 7112014 7113014 0306034 0301932 35FL050 35FL052 35FL056 35FL060 35FL063 35FL065 35FL068 346064 346071M 346095F 0306070 0303385 33415 33813 0311512 0311513 0311516 DESCRIPTION SERIES 30 INDUSTRIAL LCG BED WELDMENT 10 TON WARN WINCH ASSEMBLY 15 TON WARN WINCH ASSEMBLY WINCH CABLE ASSEMBLY - 9/16 x 75 FT FRONT SAFETY CHAIN ASSEMBLY - 5/16 x 10' LCG CAB PROTECTOR WELDMENT - 50 INCHES LCG CAB PROTECTOR WELDMENT - 52 INCHES LCG CAB PROTECTOR WELDMENT - 56 INCHES LCG CAB PROTECTOR WELDMENT - 60 INCHES LCG CAB PROTECTOR WELDMENT - 63 INCHES LCG CAB PROTECTOR WELDMENT - 65 INCHES LCG CAB PROTECTOR WELDMENT - 68 INCHES REAR REMOVABLE TUBE RAIL - STEEL (3 POST) MID REMOVABLE TUBE RAIL - STEEL (3 POST) FRONT REMOVABLE TUBE RAIL - STEEL (4 POST) LYNCH PIN JUNCTION BOX - 10 POST BEARING PAD-LOWER MAIN SILL ANTI-TILT PLATE LED MARKER LIGHT, RED LED MARKER LIGHT, AMBER GROMMET, ROUND RUBBER VI-3 Section VI - PARTS (cont’d) INDUSTRIAL LCG SUBFRAME COMPONENTS VI-4 Section VI - PARTS (cont’d) 30 LCG SUPER SINGLE SUBFRAME COMPONENTS REF. NO. NO. REQ’D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 2 4 60 1 1 4 4 1 2 1 1 1 1 1 1 1 1 2 2 2 PART NUMBER 0809475-XX 0750752 0750753 81121 72A40120R 72A40120L 0809474 0308419 0750814R 0750814L 0750751 183126 98710 74345 0940328L 0940328R 163144 0809483 0750819 DESCRIPTION SUPER SINGLE SUBFRAME WEAR STRIP 5/8 x 1-3/4 x 96 GRAY WEAR STRIP 5/8 x 1-3/4 x 96 BLACK ALLEN COUNTERSUNK BOLT 5/16 UNC x 1-1/4 SLIDEBACK CYLINDER (RH) 3.5 x 120 SLIDEBACK CYLINDER (LH) 3.5 x 120 BOLT 7/8-9 UNC x 2-3/4 NYLON LOKC NUT 7/8-9 UNC 3 BAY HOSE TRAY MUDFLAP 24 x 24 SPLASH GUARD (RH) SPLASH GUARD (LH) HINGE PIN 6-SPOOL CONTROL STATION JUNCTION BOX COUNTERBALANCE VALVE TAIL LIGHT HOUSING GROUP (LH) TAIL LIGHT HOUSING GROUP (RH) STABILIZER W/L GUIDE PAD SUBFRAME WEDGE SUBFRAME WEDGE VI-5 Section VI - PARTS (cont’d) INDUSTRIAL LCG TAIL LIGHT COMPONENTS VI-6 Section VI - PARTS INDUSTRIAL LCG TAIL LIGHT COMPONENTS REF PART # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0809470L 0809470R 0752001L 0752001R 0311516 0311512 0311503 0311498 0311510 0311511 0311528 0306385 0403053 0402121 0402122 0400071 0402111 0400371 DESCRIPTION Section VI - PARTS (cont'd) INDUSTRIAL LCG DOCK STABILIZER QPU TAIL LIGHT HOUSING WELDMENT (LH) TAIL LIGHT HOUSING WELDMENT (RH)) TAIL LIGHT BEZEL (LH) TAIL LIGHT BEZEL (RH) 2-1/2" MARKER LIGHT GROMMET 2-1/2" MARKER LIGHT 6" OVAL GROMMET 6" OVAL RED LIGHT BACK-UP LIGHT BACK-UP LIGHT GROMMET BACK-UP ALARM GROMMET BACK-UP ALARM 3/8-16 x 1-1/4 CARR. HD BOLT SS 3/8 LOCK WASHER SS 3/8-16 HEX NUT SS 1/4-20 x 3/4 RHNS SS 1/4 LOCK WASHER SS 1/4-20 LUG NUT Z VI-7 1 1 1 1 2 2 4 4 2 2 1 1 8 8 8 12 12 12 REF PART # DESCRIPTION 1 2 3 4 5 6 7 0811166 143122 16362 16363 72118 86200E 86125E INDUSTRIAL LCG DOCK STABILIZER WLMT HINGE PIN LIFT CYLINDER ROD PIN LIFT CYLINDER BASE PIN LIFT CYLINDER SNAP RING, 2 INCH EXTERNAL SNAP RING, 1-1/4 INCH EXTERNAL VI-8 QPU 1 1 2 2 2 2 8 Section VI - PARTS (cont’d) INDUSTRIAL 30 LCG 6000 LB. WHEEL LIFT TIRE RESTRAINT ASSEMBLY VI-9 Section VI - PARTS (cont’d) Section VI - PARTS (cont’d) INDUSTRIAL 30 LCG WHEEL LIFT 6000 LB. REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART # 0809466 10262 143122 729372 16362 16363 63395 93595H 72118 7B130 72938 685102 66260L 66260R 66250L 66250R 66430 65228 66245 812A9 84922 86200I 86125I 86125E 86200E 7212730 DESCRIPTION OUTER BOOM WELDMENT INNER BOOM WELDMENT WHEEL LIFT HINGE PIN EXTEND CYLINDER MOUNTING PIN 1.230 x 10-1/2 LIFT CYLINDER ROD PIN LIFT CYLINDER BASE PIN BEARING PAD, NYLATRON SPACER PAD LIFT CYLINDER GREASE FITTING - STRAIGHT EXTEND CYLINDER MOUNTING PIN 1/130 x 7-5/8 CROSSBAR WELDMENT - 4" SQUARE OUTER XTUBE ASSEMBLY - LEFT OUTER XTUBE ASSEMBLY - RIGHT L-ARM LEFT L-ARM RIGHT CROSSBAR PIVOT PIN YOKE SPRING CROSSBAR EXTENSION PIN 3/8-16 x 1 BUTTON HEAD CAP SCREW T-PIN 3/4 x 3-1/2 SNAP RING - 2" INTERNAL SNAP RING - 1-1/4" INTERNAL SNAP RING - 1-1/4" EXTERNAL SNAP RING - 2" EXTERNAL EXTEND CYLINDER VI-10 INDUSTRIAL 30 LCG WHEEL LIFT 6000 LB. QPU REF 1 1 1 1 2 2 4 2 2 3 1 1 1 1 1 1 1 1 2 4 2 1 2 10 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART # 0809466 10262 143122 729372 16362 16363 63395 93595H 72118 7B130 72938 685102 66260L 66260R 66250L 66250R 66430 65228 66245 812A9 84922 86200I 86125I 86125E 86200E 7212730 DESCRIPTION OUTER BOOM WELDMENT INNER BOOM WELDMENT WHEEL LIFT HINGE PIN EXTEND CYLINDER MOUNTING PIN 1.230 x 10-1/2 LIFT CYLINDER ROD PIN LIFT CYLINDER BASE PIN BEARING PAD, NYLATRON SPACER PAD LIFT CYLINDER GREASE FITTING - STRAIGHT EXTEND CYLINDER MOUNTING PIN 1/130 x 7-5/8 CROSSBAR WELDMENT - 4" SQUARE OUTER XTUBE ASSEMBLY - LEFT OUTER XTUBE ASSEMBLY - RIGHT L-ARM LEFT L-ARM RIGHT CROSSBAR PIVOT PIN YOKE SPRING CROSSBAR EXTENSION PIN 3/8-16 x 1 BUTTON HEAD CAP SCREW T-PIN 3/4 x 3-1/2 SNAP RING - 2" INTERNAL SNAP RING - 1-1/4" INTERNAL SNAP RING - 1-1/4" EXTERNAL SNAP RING - 2" EXTERNAL EXTEND CYLINDER VI-10 QPU 1 1 1 1 2 2 4 2 2 3 1 1 1 1 1 1 1 1 2 4 2 1 2 10 2 1 Section VI - PARTS 6-SPOOL CONTROL STATION VI-11 Section VI - PARTS 6-SPOOL CONTROL STATION VI-11 Section VI - PARTS Section VI - PARTS 6-SPOOL CONTROL STATION REF. NO. NO. REQ'D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 1 1 23 16 1 1 1 1 2 4 2 4 12 12 12 24 6 6 2 4 4 4 4 4 1 3 1 6 12 6 6 6 6 PART NUMBER 18212L/18214L 18126L 181273L 181286W 181273R 18126R 18212R/18214R 0320031 0320048-GR 0320048-BL 0320048-RD 0320048-GY 7A1155 84530 84620 7A528W 7A538W 7A5753-17 86075E 0809904 74116 7A010LINK 84540 7A121 7A010LINKPLATE 84610 PC32850 DESCRIPTION 5 SPOOL/6 SPOOL CONTROL PLACARD-LEFT CONTROL PANEL - LEFT CONTROL HOOD - LEFT NYLON LOCK NUT 5/16-18 UNC BOLT, BUTTON HEAD 5/16-18 UNC x 5/8 CONTROL BOX ARM WELDMENT - 79.5 IN. CONTROL HOOD - RIGHT CONTROL PANEL - RIGHT 5 SPOOL/6 SPOOL CONTROL PLACARD - RIGHT CONTROL LIGHT - 2 WIRE GREEN CONTROL HANDLE BLUE CONTROL HANDLE RED CONTROL HANDLE GREY CONTROL HANDLE JAM NUT 1/2-13 UNC ZINC PLATE CONTROL HANDLE PIVOT BASE CLEVIS - RIGHT HAND THREAD CLEVIS PIN, 3/8 x 1-1/8 CONTROL ROD 28-1/2 CONTROL ROD 37-3/4 CONTROL HANDLE CROSS ROD 3/4 x 17 SNAP RING 3/4 EXTERNAL LOCK WASHER 3/8 BOLT, BUTTON HEAD 3/8-16 UNC x 3/4 BOLT, HHCS 1/4-20 UNC x 3/4 NYLON LOCK NUT 1/4-20 UNC ANTI-TILT CONTROL ROD WELDMENT BOLT, HHCS 5/16 -18 UNC x 2-3/4 VALVE BODY GRESEN 6 SPOOL CLEVIS LINK CLEVIS - LEFT HAND THREAD BELL CRANK CLEVIS LINK PLATE CLEVIS PIN, 1/4 x 15/16 AIR CYLINDER - 2 IN. STROKE VI-12 6-SPOOL CONTROL STATION REF. NO. NO. REQ'D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 1 1 23 16 1 1 1 1 2 4 2 4 12 12 12 24 6 6 2 4 4 4 4 4 1 3 1 6 12 6 6 6 6 PART NUMBER 18212L/18214L 18126L 181273L 181286W 181273R 18126R 18212R/18214R 0320031 0320048-GR 0320048-BL 0320048-RD 0320048-GY 7A1155 84530 84620 7A528W 7A538W 7A5753-17 86075E 0809904 74116 7A010LINK 84540 7A121 7A010LINKPLATE 84610 PC32850 DESCRIPTION 5 SPOOL/6 SPOOL CONTROL PLACARD-LEFT CONTROL PANEL - LEFT CONTROL HOOD - LEFT NYLON LOCK NUT 5/16-18 UNC BOLT, BUTTON HEAD 5/16-18 UNC x 5/8 CONTROL BOX ARM WELDMENT - 79.5 IN. CONTROL HOOD - RIGHT CONTROL PANEL - RIGHT 5 SPOOL/6 SPOOL CONTROL PLACARD - RIGHT CONTROL LIGHT - 2 WIRE GREEN CONTROL HANDLE BLUE CONTROL HANDLE RED CONTROL HANDLE GREY CONTROL HANDLE JAM NUT 1/2-13 UNC ZINC PLATE CONTROL HANDLE PIVOT BASE CLEVIS - RIGHT HAND THREAD CLEVIS PIN, 3/8 x 1-1/8 CONTROL ROD 28-1/2 CONTROL ROD 37-3/4 CONTROL HANDLE CROSS ROD 3/4 x 17 SNAP RING 3/4 EXTERNAL LOCK WASHER 3/8 BOLT, BUTTON HEAD 3/8-16 UNC x 3/4 BOLT, HHCS 1/4-20 UNC x 3/4 NYLON LOCK NUT 1/4-20 UNC ANTI-TILT CONTROL ROD WELDMENT BOLT, HHCS 5/16 -18 UNC x 2-3/4 VALVE BODY GRESEN 6 SPOOL CLEVIS LINK CLEVIS - LEFT HAND THREAD BELL CRANK CLEVIS LINK PLATE CLEVIS PIN, 1/4 x 15/16 AIR CYLINDER - 2 IN. STROKE VI-12 Section VI - PARTS OUTBOARD 24 GALLON HYDRAULIC TANK GROUP REF 1 2 3 4 5 6 7 8 9 10 11 12 PART # 0809490 76213G 76270 ADPTR202702 16x16 ADPTR2061 20x24H 0403113 82220 81212 HOSEEND-16H-16JICF90 37855R 12826 37855L DESCRIPTION OUTBOARD 24 GALLON OIL RESERVOIR FILLER/BREATHER CAP ASSEMBLY IN-TANK FILTER ASSEMBLY #16 SAE PORT ADAPTOR 202702 16x16 ADAPTOR 2061 20x24H #8 O-RING PLUG - ADAPTOR 900598-8 LOCK WASHER 3/8 CAP SCREW 3/8-16 UNC x 7/8 SS HOSE END - 16H - 16JICF90 UNV. TOOLBOX & OIL TNK MTG.BRKT-R TOOLBOX SHIM (FOR 49 IN. ALUM. BOX) UNV. TOOLBOX & OIL TNK MTG BRKT-L VI-13 Section VI - PARTS OUTBOARD 24 GALLON HYDRAULIC TANK GROUP QPU REF 1 1 1 1 1 1 2 2 1 1 2 1 1 2 3 4 5 6 7 8 9 10 11 12 PART # 0809490 76213G 76270 ADPTR202702 16x16 ADPTR2061 20x24H 0403113 82220 81212 HOSEEND-16H-16JICF90 37855R 12826 37855L DESCRIPTION OUTBOARD 24 GALLON OIL RESERVOIR FILLER/BREATHER CAP ASSEMBLY IN-TANK FILTER ASSEMBLY #16 SAE PORT ADAPTOR 202702 16x16 ADAPTOR 2061 20x24H #8 O-RING PLUG - ADAPTOR 900598-8 LOCK WASHER 3/8 CAP SCREW 3/8-16 UNC x 7/8 SS HOSE END - 16H - 16JICF90 UNV. TOOLBOX & OIL TNK MTG.BRKT-R TOOLBOX SHIM (FOR 49 IN. ALUM. BOX) UNV. TOOLBOX & OIL TNK MTG BRKT-L VI-13 QPU 1 1 1 1 1 1 2 2 1 1 2 1 Section VI - PARTS (cont’d) Section VI - PARTS (cont’d) INDUSTRIAL LCG MUDFLAP COMPONENTS REF PART # DESCRIPTION 1 0750814L 0750814R 81240 82210 83211 0308419 0751025 MUDFLAP MOUNTING BRACKET (LH) MUDFLAP MOUNTING BRACKET (RH) 3/8 x 1-1/2 BOLT 3/8 FLAT WASHER 3/8 NYLON LOCK NUT MUDFLAP 24 x 24 MUDFLAP SUPPORT BAR 2 3 4 5 6 VI-14 INDUSTRIAL LCG MUDFLAP COMPONENTS QPU 1 1 8 16 8 2 2 REF PART # DESCRIPTION 1 0750814L 0750814R 81240 82210 83211 0308419 0751025 MUDFLAP MOUNTING BRACKET (LH) MUDFLAP MOUNTING BRACKET (RH) 3/8 x 1-1/2 BOLT 3/8 FLAT WASHER 3/8 NYLON LOCK NUT MUDFLAP 24 x 24 MUDFLAP SUPPORT BAR 2 3 4 5 6 VI-14 QPU 1 1 8 16 8 2 2 Section VI - PARTS DIRECT MOUNT PUMP REF PART # DESCRIPTION 1 2 3 4 5 78006 77C92 77620 779A8 77616 Section VI - PARTS DIRECT MOUNT PUMP QPU PUMP-24 GPM , 1 IN. 15 SPLINE SHAFT, SAE 4-BOLT FLANGE 1-1/4 x 90 M-M O-RING x 1-1/2 NIPPLE 1-1/4 O-RING PLUG 900598-20 1 O-RING x 1 JICF 202702 - 16 x 16 1 O-RING PLUG 900598-16 VI-15 1 1 1 1 1 REF PART # DESCRIPTION 1 2 3 4 5 78006 77C92 77620 779A8 77616 QPU PUMP-24 GPM , 1 IN. 15 SPLINE SHAFT, SAE 4-BOLT FLANGE 1-1/4 x 90 M-M O-RING x 1-1/2 NIPPLE 1-1/4 O-RING PLUG 900598-20 1 O-RING x 1 JICF 202702 - 16 x 16 1 O-RING PLUG 900598-16 VI-15 1 1 1 1 1 Section VI - PARTS (cont’d) Section VI - PARTS (cont’d) WARN SERIES 20 PLANETARY WINCH GROUP REF PART # DESCRIPTION 1 2 3 4 5 7112014 0750984 81510 81522 82420 WARN SERIES 20 PLANETARY WINCH DRUM SUPPORT CROSSBAR BOLT 5/8-11 UNC x 1-1/2 GR 5 ZINC PLATED BOLT 5/8-11 UNC x 2-1/4 GR 8 ZINC PLATED LOCK WASHER 5/8 ZINC PLATED VI-16 WARN SERIES 20 PLANETARY WINCH GROUP QPU 1 7 8 8 8 REF PART # DESCRIPTION 1 2 3 4 5 7112014 0750984 81510 81522 82420 WARN SERIES 20 PLANETARY WINCH DRUM SUPPORT CROSSBAR BOLT 5/8-11 UNC x 1-1/2 GR 5 ZINC PLATED BOLT 5/8-11 UNC x 2-1/4 GR 8 ZINC PLATED LOCK WASHER 5/8 ZINC PLATED VI-16 QPU 1 7 8 8 8 Section VI - PARTS (cont’d) Section VI - PARTS (cont’d) TRI-BOX PYLON REF PART # DESCRIPTION 1 354656 354660 354663 354668 374010L 374010R 374020 FRAME MOUNTED PYLON BASE WLMT FRAME MOUNTED PYLON BASE WLMT FRAME MOUNTED PYLON BASE WLMT FRAME MOUNTED PYLON BASE WLMT PYLON BOX - LEFT PYLON BOX - RIGHT PYLON BOX - CENTER BOX MOUNTING HARDWARE 3/8-16 UNC x 1-1/4 HEX HD BOLT 3/8-16 UNC NYLON LOCK NUT 5/8 FLAT WASHER FRAME BRACKET HARDWARE 5/8-11 UNC x 2 HEX HD BOLT 5/8-11 UNC NYLON LOCK NUT 5/8 FLAT WASHER 2 3 4 81230 83211 82210 81520 83411 82410 VI-17 TRI-BOX PYLON 56 INCHES 60 INCHES 63 INCHES 68 INCHES QPU REF PART # DESCRIPTION 1 1 1 1 1 1 1 1 354656 354660 354663 354668 374010L 374010R 374020 FRAME MOUNTED PYLON BASE WLMT FRAME MOUNTED PYLON BASE WLMT FRAME MOUNTED PYLON BASE WLMT FRAME MOUNTED PYLON BASE WLMT PYLON BOX - LEFT PYLON BOX - RIGHT PYLON BOX - CENTER BOX MOUNTING HARDWARE 3/8-16 UNC x 1-1/4 HEX HD BOLT 3/8-16 UNC NYLON LOCK NUT 5/8 FLAT WASHER FRAME BRACKET HARDWARE 5/8-11 UNC x 2 HEX HD BOLT 5/8-11 UNC NYLON LOCK NUT 5/8 FLAT WASHER 2 3 4 12 12 24 81230 83211 82210 8 8 16 81520 83411 82410 QPU VI-17 56 INCHES 60 INCHES 63 INCHES 68 INCHES 1 1 1 1 1 1 1 12 12 24 8 8 16 Section VI - PARTS (cont’d) Section VI - PARTS (cont’d) INDUSTRIAL LCG BED LOCK - 364110G REF PART # DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36315L 7B130 36310 82710 83610 36315R 81520 82410 83411 81438 82310 83324 364110L 364110R BODY LOCK EAR WELDMENT-LEFT GREASE FITTING 1/4-28 ROLLER WHEEL WASHER FLAT 1 IN. ID 7/8-14 UNF NYLON LOCK NUT BODY LOCK EAR WELDMENT-RIGHT BOLT 5/8-11 UNC x 2 GR5 FLAT WASHER 5/8 NUT 5/8-11 UNC NYLON LOCK 1/2-20 UNF x 1-1/4 HHCS FLAT WASHER 1/2 IN. NYLON LOCK NUT 1/2-20 UNF LCG BED LOCK MOUNTING BRACKET-LEFT LCG BED LOCK MOUNTING BRACKET-RIGHT VI-18 INDUSTRIAL LCG BED LOCK - 364110G QPU 1 2 2 4 2 1 4 4 4 6 10 6 1 1 REF PART # DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36315L 7B130 36310 82710 83610 36315R 81520 82410 83411 81438 82310 83324 364110L 364110R BODY LOCK EAR WELDMENT-LEFT GREASE FITTING 1/4-28 ROLLER WHEEL WASHER FLAT 1 IN. ID 7/8-14 UNF NYLON LOCK NUT BODY LOCK EAR WELDMENT-RIGHT BOLT 5/8-11 UNC x 2 GR5 FLAT WASHER 5/8 NUT 5/8-11 UNC NYLON LOCK 1/2-20 UNF x 1-1/4 HHCS FLAT WASHER 1/2 IN. NYLON LOCK NUT 1/2-20 UNF LCG BED LOCK MOUNTING BRACKET-LEFT LCG BED LOCK MOUNTING BRACKET-RIGHT VI-18 QPU 1 2 2 4 2 1 4 4 4 6 10 6 1 1 Section VI - PARTS 30 LCG TILT CYLINDER COMPONENTS (TANDEM AXLE CONFIGURATION) REF 1 2 3 4 5 6 7 PART # 1A510R 1A510L 1A514 1A550 72A450235 0809477 1A555 DESCRIPTION TILT CYLINDER SADDLE 24 IN - RIGHT TILT CYLINDER SADDLE 24 IN. - LEFT UNDERFRAME SUPPORT ANGLE CONNECTING ANGLE - LCG TILT CYLINDER - LCG TILT CYLINDER BASE PIN TILT CYLINDER ROD PIN VI-19 QPU 1 1 2 1 2 2 2 Section VI - PARTS 30 LCG TILT CYLINDER COMPONENTS (TANDEM AXLE CONFIGURATION) REF 1 2 3 4 5 6 7 PART # 1A510R 1A510L 1A514 1A550 72A450235 0809477 1A555 DESCRIPTION TILT CYLINDER SADDLE 24 IN. - RIGHT TILT CYLINDER SADDLE 24 IN. - LEFT UNDERFRAME SUPPORT ANGLE CONNECTING ANGLE - LCG TILT CYLINDER - LCG TILT CYLINDER BASE PIN TILT CYLINDER ROD PIN VI-19 QPU 1 1 2 1 2 2 2 Section VI - PARTS 30 LCG TILT CYLINDER COMPONENTS (TRI-AXLE CONFIGURATION) REF 1 2 3 4 5 6 7 PART # 1A510TR 1A510TL 1A514 1A550 72A450335 72A450305 0809477 1A555 DESCRIPTION TILT CYLINDER SADDLE TRI-AXLE 28 IN- RIGHT TILT CYLINDER SADDLE TRI-AXLE 28 IN. - LEFT UNDERFRAME SUPPORT ANGLE CONNECTING ANGLE - LCG TILT CYLINDER EXTENDED TRI-AXLE - LCG TILT CYLINDER STANDARD TRI-AXLE - LCG TILT CYLINDER BASE PIN TILT CYLINDER ROD PIN VI-20 Section VI - PARTS 30 LCG TILT CYLINDER COMPONENTS (TRI-AXLE CONFIGURATION) QPU 1 1 2 1 2 2 2 2 REF 1 2 3 4 5 6 7 PART # 1A510TR 1A510TL 1A514 1A550 72A450335 72A450305 0809477 1A555 DESCRIPTION TILT CYLINDER SADDLE TRI-AXLE 28 IN. - RIGHT TILT CYLINDER SADDLE TRI-AXLE 28 IN, - LEFT UNDERFRAME SUPPORT ANGLE CONNECTING ANGLE - LCG TILT CYLINDER EXTENDED TRI-AXLE - LCG TILT CYLINDER STANDARD TRI-AXLE - LCG TILT CYLINDER BASE PIN TILT CYLINDER ROD PIN VI-20 QPU 1 1 2 1 2 2 2 2 Section VI - PARTS PINTLE HITCH GROUP REF PART # DESCRIPTION 6 66370G 66370W A3020 A3020H 66280 65460 66378 812A6 5A220 81428 7 8 81449 82312 PINTLE HITCH GROUP PINTLE HITCH WELDMENT TOW BALL PINTLE HITCH PINTLE HOOK FORK HOLDER - 4 IN. CROSSBAR FORK HOLDER - 3-1/2 IN. CROSSBAR RETAINING PIN 3/8 X 5/8 BUTTONHEAD BOLT LANYARD BOLT 1/2-13 X 1.25 GRADE 8 SECURE WITH LOCTITE BOLT 1/2-13 x 2.5 GRADE 8 1/2-13 NUT NYLOK 1 2A 2B 3 4 5 VI-21 Section VI - PARTS PINTLE HITCH GROUP QPU 1 1 1 1 2 2 2 4 2 2 2 2 REF PART # DESCRIPTION 6 66370G 66370W A3020 A3020H 66280 65460 66378 812A6 5A220 81428 7 8 81449 82312 PINTLE HITCH GROUP PINTLE HITCH WELDMENT TOW BALL PINTLE HITCH PINTLE HOOK FORK HOLDER - 4 IN. CROSSBAR FORK HOLDER - 3-1/2 IN. CROSSBAR RETAINING PIN 3/8 X 5/8 BUTTONHEAD BOLT LANYARD BOLT 1/2-13 X 1.25 GRADE 8 SECURE WITH LOCTITE BOLT 1/2-13 x 2.5 GRADE 8 1/2-13 NUT NYLOK 1 2A 2B 3 4 5 VI-21 QPU 1 1 1 1 2 2 2 4 2 2 2 2 Section VI - PARTS (cont’d) OPTIONAL DASHBOARD PANEL Ignition Battery (Red) Section VI - PARTS (cont’d) OPTIONAL DASHBOARD PANEL Power UP Switch Panel (backside) Ignition High Amp Circuit Breaker Battery From Factory Harness Marker Left Turn Right Turn Back Up Marker Left Turn Right Turn Back Up 10 position Junction Box VI-22 Battery Left Turn Right Trun Back Up 10 position Junction Box 40A 20A 20A 20A PTO Beacon Flash Work Up Work Down 40A 20A 20A 20A Auxilary Power Protector PTO Beacon Flash Work Up Work Down Battery Left Turn Right Trun Back Up Power UP Switch Panel (backside) High Amp Circuit Breaker From Factory Harness Auxilary Power Protector (Red) VI-22 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER 1 2 3 0311498 0311500 3011503 REF. NO. PART NUMBER 1 2 3 0311512 0311513 0311516 DESCRIPTION LIGHT 6" OVAL RED LED - STOP/TURN LIGHT 6" OVAL REVERSE LED LIGHT 6" GROMMET DESCRIPTION LIGHT 2.5" RED REFLEX LED (MCL59RB) LIGHT 2.5" AMBER REFLEX LED (MCL59AB) LIGHT 2.5" GROMMET VI-23 LIGHT KIT REF. NO. PART NUMBER 1 2 3 0311498 0311500 3011503 REF. NO. PART NUMBER 1 2 3 0311512 0311513 0311516 DESCRIPTION LIGHT 6" OVAL RED LED - STOP/TURN LIGHT 6" OVAL REVERSE LED LIGHT 6" GROMMET DESCRIPTION LIGHT 2.5" RED REFLEX LED (MCL59RB) LIGHT 2.5" AMBER REFLEX LED (MCL59AB) LIGHT 2.5" GROMMET VI-23 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER 1 2 3 0311514 0311515 3011516 REF. NO. PART NUMBER 1 97300 DESCRIPTION LIGHT 2.5" ROUND CLEAR/RED LED MARKER LIGHT LIGHT 2.5" ROUND CLEAR/AMBER LED MARKER LIGHT LIGHT 2.5" GROMMET DESCRIPTION CONTROL STATION LIGHT VI-24 LIGHT KIT REF. NO. PART NUMBER 1 2 3 0311514 0311515 3011516 REF. NO. PART NUMBER 1 97300 DESCRIPTION LIGHT 2.5" ROUND CLEAR/RED LED MARKER LIGHT LIGHT 2.5" ROUND CLEAR/AMBER LED MARKER LIGHT LIGHT 2.5" GROMMET DESCRIPTION CONTROL STATION LIGHT VI-24 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER 1 0311519 REF. NO. PART NUMBER 1 0311520 DESCRIPTION RED 3/4 LED ICC LIGHT DESCRIPTION RED 3/4 LED LIGHT VI-25 LIGHT KIT REF. NO. PART NUMBER 1 0311519 REF. NO. PART NUMBER 1 0311520 DESCRIPTION RED 3/4 LED ICC LIGHT DESCRIPTION RED 3/4 LED LIGHT VI-25 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER 1 0311521 REF. NO. PART NUMBER DESCRIPTION 1 0311522 CLEAR/RED 3/4 ROUND LED LIGHT REF. NO. PART NUMBER DESCRIPTION 1 0311523 DESCRIPTION AMBER 3/4 ROUND LED LIGHT CLEAR/AMBER 3/4 ROUND LED LIGHT VI-26 LIGHT KIT REF. NO. PART NUMBER 1 0311521 REF. NO. PART NUMBER DESCRIPTION 1 0311522 CLEAR/RED 3/4 ROUND LED LIGHT REF. NO. PART NUMBER DESCRIPTION 1 0311523 DESCRIPTION AMBER 3/4 ROUND LED LIGHT CLEAR/AMBER 3/4 ROUND LED LIGHT VI-26 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER DESCRIPTION 1 0308359 MARKER LIGHT RED REFLEX LED REF. NO. PART NUMBER DESCRIPTION 1 0308360 MARKER LIGHT AMBER REFLEX LED VI-27 LIGHT KIT REF. NO. PART NUMBER DESCRIPTION 1 0308359 MARKER LIGHT RED REFLEX LED REF. NO. PART NUMBER DESCRIPTION 1 0308360 MARKER LIGHT AMBER REFLEX LED VI-27 Section VI - PARTS Section VI - PARTS LIGHT KIT LIGHT KIT REF. NO. PART NUMBER 1 0308969R REF. NO. PART NUMBER 1 0308969A DESCRIPTION MARKER LIGHT RED REFLEX LED DESCRIPTION MARKER LIGHT AMBER REFLEX LED VI-28 REF. NO. PART NUMBER 1 0308969R REF. NO. PART NUMBER 1 0308969A DESCRIPTION MARKER LIGHT RED REFLEX LED DESCRIPTION MARKER LIGHT AMBER REFLEX LED VI-28 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER 1 074027041ACL REF. NO. PART NUMBER 1 174027041RCL DESCRIPTION MILLENIUM MARKER LIGHT CLEAR/AMBER DESCRIPTION MELLIENUM MARKER LIGHT CLEAR/RED VI-29 LIGHT KIT REF. NO. PART NUMBER 1 074027041ACL REF. NO. PART NUMBER 1 174027041RCL DESCRIPTION MILLENIUM MARKER LIGHT CLEAR/AMBER DESCRIPTION MELLIENUM MARKER LIGHT CLEAR/RED VI-29 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER 1 0308491 REF. NO. PART NUMBER 1 0308490 DESCRIPTION REFLECTOR - AMBER DESCRIPTION REFLECTOR - RED VI-30 LIGHT KIT REF. NO. PART NUMBER 1 0308491 REF. NO. PART NUMBER 1 0308490 DESCRIPTION REFLECTOR - AMBER DESCRIPTION REFLECTOR - RED VI-30 Section VI - PARTS Section VI - PARTS LIGHT KIT REF. NO. PART NUMBER DESCRIPTION 1 1 0308420 0311513 OVAL MID BODY TURN LED OVAL MID BODY TURN GROMMET REF. NO. PART NUMBER DESCRIPTION 1 1 0311510 0311511 RECTANGULAR REFLEX BACK UP RECTANGULAR REFLEX BACK UP GROMMET VI-31 LIGHT KIT REF. NO. PART NUMBER DESCRIPTION 1 1 0308420 0311513 OVAL MID BODY TURN LED OVAL MID BODY TURN GROMMET REF. NO. PART NUMBER DESCRIPTION 1 1 0311510 0311511 RECTANGULAR REFLEX BACK UP RECTANGULAR REFLEX BACK UP GROMMET VI-31 Section VI - PARTS 33" ALUMINUM TOOLBOX - 377000 REF PART # DESCRIPTION 1 54658 54657 81111 83111 376182 54659 81115 82110 82130 83110 83125 377100W 37741 37740 81100 83105 37744 37735 811014 811012 811010 83105 0809491L 0809491R 5A221 37770 ROTARY PADDLE LATCH GASKET FOR PADDLE LATCH #8-32 X 1/2 STAINLESS ONE WAY SCREW #8-32 STAINLESS KEPT NUT STRIKER PIN MOUNTING PLATE STRIKER PIN STAINLESS CARRIAGE BOLT 5/16-18 x 3/4 FLAT WASHER 5/16 LOCK WASHER 5/16 NUT 5/16-18 NYLON LOCK NUT 5/16-18 BOX WELDMENT DOOR WELDMENT DOOR ASSEMBLY STAINLESS CARRIAGE BOLT 1/4-20 x 3/4 NYLON LOCK NUT 1/4-20 DOOR REINFORCEMENT HINGE SS SOCKET BUTTON HEAD BOLT 1/4-20 x 7/8 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 3/4 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 5/8 NYLON LOCK NUT 1/4-20 30/40 LCG TOOLBOX MOUNTING BRKT - LEFT 30/40 LCG TOOLBOX MOUNTING BRKT - RIGHT LANYARD-21 INCH SHELF 2 3 4 5 6 7 8 9 10 VI-32 Section VI - PARTS 33" ALUMINUM TOOLBOX - 377000 QPU 1 1 4 4 1 1 2 4 2 2 1 1 1 1 6 6 1 1 2 3 5 10 1 1 2 1 REF PART # DESCRIPTION 1 54658 54657 81111 83111 376182 54659 81115 82110 82130 83110 83125 377100W 37741 37740 81100 83105 37744 37735 811014 811012 811010 83105 0809491L 0809491R 5A221 37770 ROTARY PADDLE LATCH GASKET FOR PADDLE LATCH #8-32 X 1/2 STAINLESS ONE WAY SCREW #8-32 STAINLESS KEPT NUT STRIKER PIN MOUNTING PLATE STRIKER PIN STAINLESS CARRIAGE BOLT 5/16-18 x 3/4 FLAT WASHER 5/16 LOCK WASHER 5/16 NUT 5/16-18 NYLON LOCK NUT 5/16-18 BOX WELDMENT DOOR WELDMENT DOOR ASSEMBLY STAINLESS CARRIAGE BOLT 1/4-20 x 3/4 NYLON LOCK NUT 1/4-20 DOOR REINFORCEMENT HINGE SS SOCKET BUTTON HEAD BOLT 1/4-20 x 7/8 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 3/4 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 5/8 NYLON LOCK NUT 1/4-20 30/40 LCG TOOLBOX MOUNTING BRKT - LEFT 30/40 LCG TOOLBOX MOUNTING BRKT - RIGHT LANYARD-21 INCH SHELF 2 3 4 5 6 7 8 9 10 VI-32 QPU 1 1 4 4 1 1 2 4 2 2 1 1 1 1 6 6 1 1 2 3 5 10 1 1 2 1 Section VI - PARTS 49" ALUMINUM TOOLBOX - 378000 REF PART # DESCRIPTION 1 54658 54657 81111 83111 376182 54659 81115 82110 82130 83110 83125 378100W 37841 37840 81100 83105 37844 37835 811014 811012 811010 83105 0809491L 0809491R 5A221 37670 ROTARY PADDLE LATCH GASKET FOR PADDLE LATCH #8-32 X 1/2 STAINLESS ONE WAY SCREW #8-32 STAINLESS KEPT NUT STRIKER PIN MOUNTING PLATE STRIKER PIN STAINLESS CARRIAGE BOLT 5/16-18 x 3/4 FLAT WASHER 5/16 LOCK WASHER 5/16 NUT 5/16-18 NYLON LOCK NUT 5/16-18 BOX WELDMENT DOOR WELDMENT DOOR ASSEMBLY STAINLESS CARRIAGE BOLT 1/4-20 x 3/4 NYLON LOCK NUT 1/4-20 DOOR REINFORCEMENT HINGE SS SOCKET BUTTON HEAD BOLT 1/4-20 x 7/8 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 3/4 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 5/8 NYLON LOCK NUT 1/4-20 30/40 LCG TOOLBOX MOUNTING BRKT - LEFT 30/40 LCG TOOLBOX MOUNTING BRKT - RIGHT LANYARD-21 INCH SHELF 2 3 4 5 6 7 8 9 10 VI-33 Section VI - PARTS 49" ALUMINUM TOOLBOX - 378000 QPU 2 2 8 8 2 2 4 8 4 4 2 1 1 1 8 8 1 1 2 5 7 14 1 1 2 1 REF PART # DESCRIPTION 1 54658 54657 81111 83111 376182 54659 81115 82110 82130 83110 83125 378100W 37841 37840 81100 83105 37844 37835 811014 811012 811010 83105 0809491L 0809491R 5A221 37670 ROTARY PADDLE LATCH GASKET FOR PADDLE LATCH #8-32 X 1/2 STAINLESS ONE WAY SCREW #8-32 STAINLESS KEPT NUT STRIKER PIN MOUNTING PLATE STRIKER PIN STAINLESS CARRIAGE BOLT 5/16-18 x 3/4 FLAT WASHER 5/16 LOCK WASHER 5/16 NUT 5/16-18 NYLON LOCK NUT 5/16-18 BOX WELDMENT DOOR WELDMENT DOOR ASSEMBLY STAINLESS CARRIAGE BOLT 1/4-20 x 3/4 NYLON LOCK NUT 1/4-20 DOOR REINFORCEMENT HINGE SS SOCKET BUTTON HEAD BOLT 1/4-20 x 7/8 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 3/4 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 5/8 NYLON LOCK NUT 1/4-20 30/40 LCG TOOLBOX MOUNTING BRKT - LEFT 30/40 LCG TOOLBOX MOUNTING BRKT - RIGHT LANYARD-21 INCH SHELF 2 3 4 5 6 7 8 9 10 VI-33 QPU 2 2 8 8 2 2 4 8 4 4 2 1 1 1 8 8 1 1 2 5 7 14 1 1 2 1 Section VI - PARTS 65" ALUMINUM TOOLBOX - 379000 REF PART # DESCRIPTION 1 54658 54657 81111 83111 376182 54659 81115 82110 82130 83110 83125 379100W 37941 37940 81100 83105 37944 37935 811014 811012 811010 83105 0809491L 0809491R 5A221 37970 ROTARY PADDLE LATCH GASKET FOR PADDLE LATCH #8-32 X 1/2 STAINLESS ONE WAY SCREW #8-32 STAINLESS KEPT NUT STRIKER PIN MOUNTING PLATE STRIKER PIN STAINLESS CARRIAGE BOLT 5/16-18 x 3/4 FLAT WASHER 5/16 LOCK WASHER 5/16 NUT 5/16-18 NYLON LOCK NUT 5/16-18 BOX WELDMENT DOOR WELDMENT DOOR ASSEMBLY STAINLESS CARRIAGE BOLT 1/4-20 x 3/4 NYLON LOCK NUT 1/4-20 DOOR REINFORCEMENT HINGE SS SOCKET BUTTON HEAD BOLT 1/4-20 x 7/8 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 3/4 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 5/8 NYLON LOCK NUT 1/4-20 30/40 LCG TOOLBOX MOUNTING BRKT - LEFT 30/40 LCG TOOLBOX MOUNTING BRKT - RIGHT LANYARD-21 INCH SHELF 2 3 4 5 6 7 8 9 10 VI-34 Section VI - PARTS 65" ALUMINUM TOOLBOX - 379000 QPU 2 2 8 8 2 2 4 8 4 4 2 1 1 1 8 8 1 1 2 7 9 18 1 1 2 1 REF PART # DESCRIPTION 1 54658 54657 81111 83111 376182 54659 81115 82110 82130 83110 83125 379100W 37941 37940 81100 83105 37944 37935 811014 811012 811010 83105 0809491L 0809491R 5A221 37970 ROTARY PADDLE LATCH GASKET FOR PADDLE LATCH #8-32 X 1/2 STAINLESS ONE WAY SCREW #8-32 STAINLESS KEPT NUT STRIKER PIN MOUNTING PLATE STRIKER PIN STAINLESS CARRIAGE BOLT 5/16-18 x 3/4 FLAT WASHER 5/16 LOCK WASHER 5/16 NUT 5/16-18 NYLON LOCK NUT 5/16-18 BOX WELDMENT DOOR WELDMENT DOOR ASSEMBLY STAINLESS CARRIAGE BOLT 1/4-20 x 3/4 NYLON LOCK NUT 1/4-20 DOOR REINFORCEMENT HINGE SS SOCKET BUTTON HEAD BOLT 1/4-20 x 7/8 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 3/4 SS SOCKET BUTTON HEAD BOLT 1/4-20 x 5/8 NYLON LOCK NUT 1/4-20 30/40 LCG TOOLBOX MOUNTING BRKT - LEFT 30/40 LCG TOOLBOX MOUNTING BRKT - RIGHT LANYARD-21 INCH SHELF 2 3 4 5 6 7 8 9 10 VI-34 QPU 2 2 8 8 2 2 4 8 4 4 2 1 1 1 8 8 1 1 2 7 9 18 1 1 2 1 Section VI - PARTS LCG RETRACTABLE LADDER REF PART # 1 2 3 4 5 6 7 8 9 10 11 12 390000 391010 391020 391030 391050 36310 86100E 82710 391026 391018 391015 81211 83211 Section VI - PARTS LCG RETRACTABLE LADDER DESCRIPTION LADDER ASSEMBLY LADDER CARRIAGE UPPER RUNG ASSEMBLY LOWER RUNG ASSEMBLY FRAME MOUNTING BRACKET - OPTIONAL WHEEL RETAINING RING 1.00 EXTERNAL FLAT WASHER 1 x 1.50 RETAINING BOLT 5/8-11 x 1-1/2 WEAR PAD RETAINING TUBE ALLEN HEAD BOLT 3/8-16 x 1 NYLON LOCK NUT 3/8-16 VI-35 QPU 1 1 1 1 1 2 2 2 2 4 2 4 4 REF PART # 1 2 3 4 5 6 7 8 9 10 11 12 390000 391010 391020 391030 391050 36310 86100E 82710 391026 391018 391015 81211 83211 DESCRIPTION LADDER ASSEMBLY LADDER CARRIAGE UPPER RUNG ASSEMBLY LOWER RUNG ASSEMBLY FRAME MOUNTING BRACKET - OPTIONAL WHEEL RETAINING RING 1.00 EXTERNAL FLAT WASHER 1 x 1.50 RETAINING BOLT 5/8-11 x 1-1/2 WEAR PAD RETAINING TUBE ALLEN HEAD BOLT 3/8-16 x 1 NYLON LOCK NUT 3/8-16 VI-35 QPU 1 1 1 1 1 2 2 2 2 4 2 4 4