Facility Electrical
Protection
FACILITY ELECTRICAL PROTECTION
Founded in 1903 as the Electric Railway Improvement Company, ERICO developed the CADWELD®
exothermic welding process in 1938. CADWELD connections have found industry-wide acceptance as the ultimate
grounding and bonding connection. During the 1970s, ERICO pioneered the copperbonded steel ground rod electrode.
Today, ERICO’s range of facility electrical protection products includes ERITECH® ground rods, clamps, grounding and
bonding assemblies, ground enhancement material, ground testers, structural lightning protection, equipotential mesh
and mats, and signal reference grids; CRITEC® low-voltage TVSS devices; and CADWELD® exothermic connections.
Facility Electrical Protection
Lightning protection, grounding, equipotential
bonding and surge protection are all
interdependent disciplines and the focus of our
Facility Electrical Protection product group.
Reliable protection of personnel and structures
demands a systematic and comprehensive
approach to minimizing threats caused by
transients and other
system disturbances. For
instance, no air terminal
can safely capture and
arrest the lightning energy
without a dependable route
to ground. Equally, even the
most expensive Surge
Protection Device (SPD) will
not provide optimum protection if a low-impedance
electrical connection to the
ground is not present.
Additionally, a lowimpedance ground system
may create hazards to
equipment and personnel
alike if equipotential
bonding is not in place.
These interdependent
disciplines are best applied
when looking at a total facility rather than an
individual piece of equipment or a portion of the
facility.
Since no single technology can eliminate the
harmful effects of lightning or induced-surge
transients, ERICO has developed the Six Point Plan
of Protection. The concept behind this plan is a
holistic and coordinated approach that embraces
all aspects of effective facility electrical protection.
The six interdependent disciplines that form the
protection plan are:
1. Capture the lightning strike
2. Convey this energy to ground
3. Dissipate energy into the grounding system
4. Bond all ground points together
5. Protect incoming AC power feeders
6. Protect low voltage data/telecommunications circuits
At ERICO, we offer innovative,
efficient grounding and bonding
products as well as engineering
experience and technical support.
With this experience, ERICO is a
world-leading authority in the design
and construction of permanent,
low-impedance grounding systems.
ERICO employs a quality-assurance
program to help ensure that detailed
procedures required for every step of
the operation produce the best
possible system for our clients. This
attention to detail includes design,
materials procurement, manufacturing, installation and testing.
Our research and development
capabilities provide continuous
design improvement with new and improved products
that preempt the challenging requirements of everevolving industry applications. Engineering expertise is
shared among the other ERICO operations worldwide,
to provide a comprehensive global knowledge pool.
Trust ERICO for all of your facility electrical
protection needs.
www.erico.com
FACILITY ELECTRICAL PROTECTION
Table of Contents
Technical Information ..................................................................................Pages 4-16
ERITECH® Lightning Protection ............................................................Pages 17-26
ERITECH® Conductors
................................................................................Pages
27-29
ERITECH® Grounding and Bonding ..................................................Pages 30-41
CRITEC® Surge Protection ........................................................................Pages 42-44
CADWELD®/CADWELD® PLUS/CADWELD® MULTI ..................Pages 45-56
Index ......................................................................................................................Pages 57-59
www.erico.com
1
CATALOGUE OVERVIEW
LIGHTNING PROTECTION
ERICO® Six Point Plan of Protection
Point 1 - Capture the
Effective lightning protection involves the integration
of several concepts. ERICO® employs the Six Point Plan of Protection
as a useful guide to ensure the highest level of system security.
lightning strike
PAGES 17 TO 19
PAGES 21 TO 22
Point 2 - Convey this
energy to ground
PAGES 23 TO 26
GROUNDING & BONDING
Point 4 - Bond all ground
points together
Point 3 - Dissipate energy into
the grounding system
PAGES 27 TO 29
PAGES 31 TO 37
2
PAGES 38 TO 41
www.erico.com
6
surges and transients on incoming power lines to help prevent
equipment damage and costly operational downtime.
Protect low voltage data/telecommunications circuits.
Protect equipment from surges and transients on incoming
telecommunications and signal lines to help prevent equipment
damage and costly operational downtime.
CADWELD® PLUS
W
NE
PAGES 46 TO 48
CADWELD®
SURGE PROTECTION
Point 5 - Protect incoming AC
power feeders
PAGES 43 TO 44
www.erico.com
Point 6 - Protect low voltage data/
telecommunications circuits
PAGES 43 TO 44
3
PAGES 48 TO 56
CADWELD® MULTI
PAGE 49
TECHNICAL INFORMATION
3
energy to the ground via a purpose-designed
downconductor.
Dissipate energy into the grounding system.
Dissipate energy into a low impedance
grounding system.
LIGHTNING PROTECTION
5 Protect incoming AC power feeders. Protect equipment from
CONDUCTORS
2 Convey this energy to ground. Conduct the
help eliminate ground loops and create an equipotential plane.
GROUNDING & BONDING
4 Bond all ground points together. Bond all ground points to
ning strike to a known and preferred attachment
point using a purpose-designed air terminal system.
SURGE PROTECTION
1 Capture the lightning strike. Capture the light-
CADWELD
CATALOGUE OVERVIEW
TECHNICAL INFORMATION
TECHNICAL INFORMATION
ERITECH ® SYSTEM 3000
PROTECTION OF STRUCTURES
AGAINST LIGHTNING
There are 2 types of devices for the protection of structures against
lightning: the conventional one, based only on passive components
(copper, galvanized steel...), and the active protection system, The
latter being based on advanced knowledge and more than 15
years of experience.
AIR TERMINAL
THE ERITECH DYNASPHERE
ENHANCED AIR TERMINAL
The patented ERITECH DYNASPHERE is an enhanced air terminal.
• Non radioactive
• Not externally powered
• Has no moving parts
• Responds dynamically to the approach of a lightning downleader.
ACTIVE PROTECTION
WHAT IS THE SYSTEM?
PRINCIPLES OF THE ERITECH DYNASPHERE
The ERITECH® SYSTEM 3000 is a technically advanced lightningprotection system. The unique features of this system allow the
achievement of superior technical performance and hence provide
more reliable lightning capture.
The ERITECH® DYNASPHERE air terminal provides a preferred point for
lightning discharges which would otherwise strike and damage an
unprotected structure and/or its contents. The ERITECH DYNASPHERE
is connected to an ERITECH® ERICORE downconductor and the ground
system in such a way as to provide a totally integrated system.
PROTECTION LEVEL
Lightning is a statistical phenomena where 100% protection is virtually
impossible to achieve, and certainly, is not economically practical. IEC
62305-3 defines 4 protection levels together with associated interception
efficiencies. This information is used to determine the appropriate air
terminal location and spacing.
LEVEL I
LEVEL II
LEVEL III
LEVEL IV
99%
97%
91%
84%
Very high risk structures
High risk structures
Medium risk structures
Low risk structures, e.g. Residential
For more than 200 years little improvement was made in lightning protection systems.
Modern research and recording methods have led to a better understanding
of the lightning discharge process and various breakthroughs have
been achieved in the simulation of lightning electric-field conditions.
Two fundamental concepts have emerged from recent research into
the lightning attachment process and air terminal performance:
1. Air terminals that produce copious quantities of corona (space charge)
are likely to be less efficient in the interception of a lightning
downward leader.
2. An optimum air terminal is one which launches an upward streamer
when it is highly likely to convert into a stable, propagating leader
(to intercept the downward leader)
The ERITECH DYNASPHERE has been developed with these two
concepts in mind.
The ERITECH DYNASPHERE is an enhanced Franklin rod with a
spherical dome which is capacitively coupled to the electric field of an
approaching lightning downleader.
This spherical conductive surface surrounds a central earthed lightning
rod. The sphere is insulated from the rod but connected to ground via
a high impedance with DC conduction.
The ERITECH DYNASPHERE is isolated from the structure using an insulated support mast. The mast also enables the safe connection of the
ERITECH ERICORE downconductor to the air terminal.
4
www.erico.com
TECHNICAL AND DESIGN
CHARACTERISTICS
OF ERITECH ® ERICORE
PLASTIC FILLER TO INCREASE EFFECTIVE
DIAMETER OF CORE CONDUCTOR
(Inductance-Skin effect)
MAIN CONDUCTOR
The ERITECH ERICORE downconductors have been
designed to meet the criteria for an effective and
reliable downconductor with the following key
characteristics:
COPPER TAPE
SEMI-CONDUCTIVE STRESS CONTROL LAYER
POLYETHYLENE H.V. INSULATION
SEMI-CONDUCTIVE STRESS CONTROL LAYER
• a low inductance per unit length
• a low surge impedance
• a carefully controlled internal electric field distribution
to minimise field stresses under current impulse
conditions
• carefully designed, stress reducing upper
termination.
MAIN COPPER TAPE SCREEN
SEMI-CONDUCTIVE OUTER SHEATH
METAL SADDLES SECURE CABLE & BOND
OUTER SCREEN TO STRUCTURE
ERITECH ® SYSTEM 1000
ERITECH ® INTERCEPTOR SI ESE LIGHTNING TERMINALS
•
•
•
•
Designed and tested to NFC17-102 and UNE-21186
Stainless steel design suitable for most environments
Available in three models to suit specific site requirements
Suitable for connection to a variety of downconductor systems including
tape, cable, smooth-weave and ERICORE conductor
• Fully compatible with the ERITECH® SYSTEM 3000 mast, ERITECH ERICORE
cable and accessories
ERITECH ® SYSTEM 2000
CONVENTIONAL PROTECTION
Conventional protection of buildings or structures
involves the use of suitably positioned air terminals
(lightning rods) which are interconnected with a metal
downconductor network (usually copper) to provide the
most direct path from the air termination to a low
impedance grounding system.
This helps ensure a safe and effective dissipation of the
lightning impulse. Comprehensive conventional systems
are often referred to as Faraday Cages.
Simple lightning rod
www.erico.com
5
Faraday cage
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
For the efficient performance of a lightning protection system, it is
essential that a low impedance ground be provided to facilitate the
dissipation of the lightning energy into the earth mass.
Because soil conditions and seasonal patterns vary from site to
site, the methods of grounding need to be considered on an
individual basis.
GROUND RODS,
TAPES AND CLAMPS
ERITECH® copperbonded, galvanized and stainless steel earth rods
facilitate the transfer of surges and fault currents into the earth, and
provide a long service life due to superior construction and quality.
GROUND ENHANCEMENT
MATERIAL (GEM)
Ground enhancing materials can be applied around the conductors in
a grounding system to reduce the local soil resistivity and lower ground
impedance. They are particularly useful in areas of moisture variation, sandy soils and rocky ground.
GROUND POTENTIAL
EQUALISATION
ERICO’s range of equipotential ground bars, plates, pre-engineered
grids, and Potential Equalization Clamps combine to create a safe
equipotential ground plane for the protection of personnel and equipment.
Polymeric
Cover
CADWELD®/CADWELD® PLUS
MOLECULAR BONDING
CADWELD PLUS
Package
Ignitor Strip
Graphite
Mould
Tap Hole
Conductor
Connections are often the most critical element of grounding
systems, and subsequently can become the weak point due to
ageing and corrosion. The preferred method of connection is the
CADWELD® exothermic welding process producing a molecular
bond. The capacity of an earthing circuit to protect the safety of
personnel depends on the quality of the connections made.
Weld Cavity
THE CADWELD MOULD
COVER
CRUCIBLE
STARTING
POWDER
WELDING
MATERIAL
DISC
SEAT
TAP
HOLE
WELD
CAVITY
CONDUCTOR
CONDUCTOR
6
www.erico.com
TECHNICAL INFORMATION
TECHNICAL INFORMATION
GROUND ELECTRODES
The ground electrode is a critical component of the grounding
system. Many different types of electrodes are available, some
"natural" and some "made”. The natural types include metal
underground water pipe, the metal frame of a building (if effectively
grounded), a copper wire or reinforcing bar in a concrete foundation
or underground structures or systems. Consideration should be
given to bonding of natural earths to ensure electrical continuity
with a facilities’ other "earths".
"Made" electrodes are specifically installed to improve the system
grounding or earthing. These earth electrodes must ideally penetrate
into the moisture level below the ground level to reduce resistance.
They must also consist of metal conductors (or a combination of
metal conductor types), which do not corrode excessively for the
period of time they are expected to serve. Made electrodes include
rods or pipes driven into the earth, metallic plates buried in the earth
or a copper wire ring encircling the structure. Underground gas
piping or aluminium electrodes are NOT permitted for use as ground
electrodes.
GROUND RODS
Which ground rod should be used?
Ground rods are often selected on the basis of their resistance to corrosion.
The other major factor is cost. All too often, the cost of a product is seen as
the initial up front price, but the real cost is determined by the serviceable life
of the ground rod.
Galvanized steel rods are one of the cheapest electrodes available. However,
they are not the most cost effective since they have a relatively short service
life. Solid copper and stainless steel rods have a long service life. However,
they are considerably more expensive than galvanized steel rods. In addition to
this, solid copper rods are not suited to deep driving or even driving short
lengths into hard ground, without bending.
As a compromise, steel cored ground rods,
swaged in a copper or stainless steel
sheath were developed. These ground
rods are much less expensive than their
solid counterparts. They are capable of
being deep driven. However, the sheath
of this rod type has been known to slip
or tear, particularly the copper version. Once
this sheath has been damaged, the integrity
of the entire electrode is at risk.
• Cost effective
long service life
Copperbonded
coating:
• Permanent
molecular bond
• Low resistance
performance
• High fault current
capacity (IEEE® Std 80)
• Will not slip or tear
when driven
• Will not crack
if rod is bent
Carbon Steel
core and tip:
• Greater tensile
strength
• Deep driving
capability
Ask for the ERICO® White Paper on Ground Rods –
Copperbonded vs. Galvanized.
Copperbonded ground rod
versus Galvanized ground rod.
www.erico.com
COPPERBONDED
GROUND ROD
7
GALVANIZED
GROUND ROD
• Lower purchase
price - not as cost
effective as
Copperbonded
Galvanized coating:
• Relatively short
service life
• May crack if rod
is bent
Steel core and tip:
• High tensile
strength
• Deep driving
capability
GROUND ELECTRODES
The Stainless Steel Option
The copperbonded ground rod has an
electrolytic coating of copper deposited
over a layer of nickel. This process
ensures a long lasting, molecular bond
between the copper layer and the steel
core. ERICO® recommends
copperbonded ground rods because
the copper coating will not slip or tear
when driven nor will it crack if the rod
is bent. The tough, carbon steel core
has good characteristics for deep
driving. Copperbonded ground rods
have a high resistance to corrosion and
provide a low resistance path to
ground.
It is important to note that certain soils
and land fill areas may not be compatible
with copper. In these situations, stainless
steel is a better proposition. Stainless
steel may also be an alternative, where
structures or components, such as steel
towers, poles or lead sheathed cables are
in close proximity to an array of ground
electrodes. In these circumstances,
consideration must be given to the
consequence of galvanic corrosion. The
high cost of stainless steel rods prohibits
their widespread use.
Above photo shows two ground rods
subjected to the same pressure load test.
The ERITECH® copperbonded ground rod,
shown on the left, will bend without tears,
cracks or folds, to the outer sheath. The
inferior copperclad rod shown on the right,
has developed cracks and creases to the
outer sheath, which will significantly
reduce its serviceable life and put the
integrity of the entire electrode at risk.
GROUND ROD ANNUAL COST
Ga
lva Zi
niz nc
ed
Ste
el Cop
(10 pe
mi rbo
l/2 nd
54 ed
μm
Ste
)
el Cop
(13 pe
mi rbo
l/3 nd
30 ed
μm
)
Ga
lva Zi
niz nc
ed
Ste
C
o
el
(10 ppe
mi rbo
l/2 nd
54 ed
μm
Ste
)
C
el op
(13 pe
r
mi bo
l/3 nd
30 ed
μm
)
Sta
inl
e
Ste ss
el
8
Sta
inl
e
Ste ss
el
COMPARATIVE COST
GROUND ROD LIFE EXPECTANCY
YEARS
TECHNICAL INFORMATION
TECHNICAL INFORMATION
www.erico.com
WHY IS GOOD GROUNDING IMPORTANT?
Fig.1-A
The transient nature of lightning with its associated fast rise times and
large magnitude currents mean that special consideration needs to be
given to grounding, for lightning protection to be effective. Many
factors such as soil resistivity variations, installation accessibility, layout
and existing physical features are all site specific and tend to affect
decisions on grounding methods employed. The primary aim of a
direct strike grounding system is to:
• Efficiently dissipate lightning surge energy into the ground
• Help ensure safety of equipment and personnel
Distance
from the
electrode
Earth Rod
GROUNDING PRINCIPLES
Low impedance is the key to lightning protection. All grounding
connections should be as short and direct as possible to minimise
inductance and reduce peak voltages induced in the connections. The
ground electrode system must efficiently couple lightning surges into
the ground by maximising capacitive coupling to the soil. The
resistance of the ground itself to lightning currents must also be
minimised. Only when all these factors are taken into account will
maximum lightning protection be achieved.
GROUND IMPEDANCE
Soil resistivity is an important design consideration. It varies markedly
for different soil types, moisture content and temperatures and gives
rise to variations in ground impedances.
Figure 1-B illustrates current flow from the injection point of a single
ground electrode. As current flows out from the central injection
point, a voltage gradient on the ground surface around the electrode
is produced. This gradient levels off to a plateau at some distance from
the electrode, as seen in Figure 1-A. The impedance seen by the
current is determined by the soil particles in direct contact with the
surface of the rod, and by the general impedance of the soil.
Fig.1-B
CHARACTERISTICS OF A GOOD
GROUNDING SYSTEM
• Good electrical conductivity
• Conductors capable of withstanding high fault currents
• Long life - at least 40 years
• Low ground resistance and impedance
The basis philosophy of any grounding installation should be an
attempt to maximise the surface area of electrodes or conductors with
the surrounding soil. Not only does this help to lower the earth
resistance of the grounding system, but it also greatly improves
the impedance of the grounding system under lightning surge
conditions.
SHORT, DIRECT GROUND CONNECTIONS
The voltage generated by a lightning surge depends primarily on the
risetime of the surge current and the impedance (primarily inductance)
of the path to ground. Extremely fast rise times result in significant
voltage rises due to any series inductance resulting from long, indirect
paths, or sharp bends in the routing of ground conductors.
• Equipotential bonding
COUPLING FROM THE ELECTRODE
SYSTEM TO THE GROUND
The efficiency of a ground electrode system in coupling a lightning
surge current to ground is dependent on a number of factors, including
the geometry of the ground electrode system, the shape of the
conductors and the effective coupling into the soil.
Equipotential bonding helps ensure that hazardous potential differences do not occur between different incoming conductors
such as metallic water services, power systems, telecommunication systems and the local ground, and also minimises step and
touch potentials.
• Good corrosion resistance
The ground electrode system should be corrosion resistant, and
compatible with other conductors that are buried and bonded to
the ground system. Copper is by far the most common material
used for grounding conductors. In general, some form of maintenance or inspection procedure should be adopted to ensure the
long-term effectiveness of a grounding system.
DOWNCONDUCTOR
GEM
EARTH PIT
• Electrically and mechanically robust and reliable
A typical grounding system.
Mechanical coupling can be used to join ground conductors, but
suffers from corrosion effects when dissimilar metals are involved.
As well as mechanical strength, CADWELD® connections provide
excellent low impedance, long life electrical connections with
excellent corrosion resistance.
www.erico.com
9
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
COMPONENTS OF A GROUNDING
SYSTEM
A grounding system for lightning protection serves to deliver
the lightning current into ground. It consists of one or more
ground electrodes (earthing rods) along with any interconnecting
conductors. Components include:
WITHOUT
PROTECTION
WITHOUT
PROTECTION
• Ground rods
• Ground enhancing materials
• CADWELD® exothermic welded connections
• Ground connectors – tapes, stranded cables, rod clamps,
mesh, plates etc
• Ground pits - for access to the ground system
Figure 2
DESIGNING A GROUND ELECTRODE SYSTEM
A significant factor governing the choice of a grounding system are
the applicable standards and codes:
European
American
Australian
IEC 10234-1, IEC 61364-5, ENV 61024-1,
BS 1400, BS 7430, NFC 17100, NFC 17102
EN-50164-2
NFPA® 780, IEEE® STD80, IEEE 837, NFPA 70
AS1768
Other factors to consider include:
• The needs and layout of the facility
(location and space confinement issues)
DIFFERENCE OF
POTENTIAL
Step and Touch Potential. Step potential is the voltage difference between a
person’s feet caused by the dissipation gradient of a fault entering the earth.
Touch potential is similar to “step potential” except that the fault current passes
through the person’s arm and torso on the way to the ground.
• Reducing ground impedance
Resistivity of the soil varies markedly for different soil types, moisture
content and temperatures, and this gives rise to variations in ground
system impedance. The lower the resistivity, the easier it is to achieve
an effective grounding system. Measures that can be used for reducing
earth impedance include:
• Connecting additional buried conductors to the ground electrode
• Use of multiple interconnected ground electrodes
• Use of flat tape rather than circular conductors
• Use of spaced conductors connected in parallel
• Use of equipotential mesh electrodes
• Use of multiple short interconnected buried conductor
• The ground environment of the facility itself
(eg soil resistivity)
• Existing grounding systems
• Susceptibility to seasonal variations in soil moisture
content and temperature
• Exposure to pedestrian traffic
• Step and Touch Potentials
While it is clear that a low impedance grounding system will allow the
lightning surge energy to be dissipated into the ground, this will not
necessarily minimise hazards to personnel in close proximity to the
grounding system. High voltage gradients on the surface of the
ground give rise to undesirable step and touch potential hazards. In
order to reduce the chance of injury to personnel, both step and touch
potentials must be minimised. Figure 2 graphically illustrates the
danger of such potentials.
• Selecting the right connections
The connections between the conductors and the main grid, and
between the grid and ground rods, are as important as the conductors
themselves in maintaining a permanent low-resistance path to ground.
10
• Use of ground enhancing compounds
Electrically conductive ground enhancing compounds can be applied
to help lower ground resistance and impedance. They are particularly
useful for rocky ground, areas of moisture variation and sandy soils.
These compounds are generally applied around electrodes in oversized
drill holes and around horizontal buried conductors.
• Use of mineral or chemical ground rods
Mineral or chemical ground rods are also used to decrease ground
impedance. These consist of a perforated hollow copper tube sealed
at the bottom. A salt compound is placed inside the tube which
gradually leaches out to maintain a conductive environment around
the electrode.
• Use of concrete slabs or footings
The use of reinforced concrete slabs and footings is one of the most
effective ways to provide a low impedance ground electrode system. If
addressed at the design stage this method can provide a very stable,
permanent distributed ground electrode system at very little additional
cost to the civil works.
www.erico.com
TECHNICAL INFORMATION
TECHNICAL INFORMATION
GROUND POTENTIAL EQUALISATION
Creating an equipotential earth plane under transient conditions is
essential for equipment and personnel safety. However, separate earths
are sometimes installed for lightning, mains power, computer and
communications equipment in buildings and other installations.
Although this may be desirable under normal operating conditions,
when lightning or other transient voltages occur, potential differences
between the separate earths are inevitable. These can enter buildings,
destroying equipment and creating dangers for personnel.
The PEC (Potential Equalization
Clamp) usually operates as an
effective open circuit. However,
once the earth potential difference
exceeds the breakdown voltage
of the PEC (under transient
conditions), the circuit closes
immediately and the earth
potential’s are equalised, thereby
protecting equipment and people.
TELECOM
EARTH
BAR
POWER
EARTH
BAR
MAINS
POWER
EARTH
WIRE
MAINS EARTH
Estimated linear feet of ground conductor covering
with each bag of GEM
Total thickness of GEM
Trench
Width
2, 5 cm
(1”)
5, 1 cm
(2”)
7, 6 cm
(3”)
10, 2 cm
(4”)
10 cm
(4”)
4.3 m (14.0’)
2.1 m (7.0’)
1.4 m (4.7’)
1.1 m (3.5’)
15 cm
(6”)
2.8 m (9.3’)
1.4 m (4.7’)
0.9 m (3.1’)
0.7 m (2.3’)
20 cm
(8”)
2.1 m (7.0’)
1.1 m (3.5’)
0.7 m (2.3’)
0.5 m (1.8’)
25 cm (10”)
1.7 m (5.6’)
0.9 m (2.8’)
0.6 m (1.9’)
0.4 m (1.4’)
30 cm (12”)
1.4 m (4.7’)
0.7 m (2.3’)
0.5 m (1.6’)
0.4 m (1.2’)
LP EARTH
Equipotential earth plane created by bonding all earths
together with Potential Equalization Clamps (PEC).
• Appropriate depth and separation of electrodes
The length, number and placement of ground rods affects the resistivity
of the path to ground. The most cost-effective depth to which an electrode
should be driven is usually dependent on specific soil conditions. Soils
are rarely homogeneous or uniform and it may be advantageous to
install electrodes to a particular depth where a low resistivity soil layer,
such as a clay base, is encountered. Electrode depths commonly used
are in the range of 1 to 4 m. Electrodes should be separated by a
distance of at least twice the depth to which they are installed.
• Equipotential Bonding
Potential equalisation ensures that any potential rise due to the injection
of lightning current into the impedance of the grounding network, is
experienced by all the conductive services in the building. Thus everything
rises in potential together and hazardous potential differences are avoided.
www.erico.com
A superior conductive material that improves grounding effectiveness,
especially in areas of poor conductivity (rocky ground, areas of
moisture variation, sandy soils) :
LIGHTNING
DOWNCONDUCTOR
EARTH
PIT
TELECOM EARTH
GROUND ENHANCEMENT MATERIAL (GEM)
Estimated bags of GEM for backfilling around ground
rods to a density of 90 lb/cu ft (1442 kg/m3)
Depth of hole (Feet) *
Dia. of
hole
7.5 cm
10.0 cm
12.5 cm
15.0 cm
17.5 cm
20.0 cm
22.5 cm
25.0 cm
11
(3”)
(4”)
(5”)
(6”)
(7”)
(8”)
(9”)
(10”)
1.8 m 2.1 m 2.4 m 2.7 m 5.2 m 5.8 m 6.1 m
(6’)
(7’)
(8’)
(9’)
(17’) (19’) (20’)
2
2
3
5
6
8
10
12
2
3
4
5
7
9
12
14
2
3
4
6
8
11
13
16
2
3
5
7
9
12
15
18
4
6
9
13
17
22
28
34
4
7
10
14
19
25
31
38
4
7
10
15
20
26
32
40
PROTECTION FROM POWER SURGES
To meet the fundamental requirements of performance, longer service life and greater safety under real world conditions, ERICO® has
developed a range of technologies covering all aspects of the Six Point Plan of Protection. In the field of surge protection, several
technologies play a critical role in the provision of premium performance.
The DINLINE Product range offers both shunt or series protection utilising differing technologies in compact DIN rail mounted products.
A number of different options are available to suit your individual application or performance requirements.
SHUNT SURGE PROTECTION DEVICES
SERIES SURGE PROTECTION DEVICES
For strategic or critical applications the DINLINE Surge Filter
(DSF/TDF) provides, superior protection for sensitive electronic
equipment. In addition to simply diverting the surge energy, the
units filter the clamped waveform. The products should be
installed prior to sensitive and valuable electronic equipment
and installations utilising electronic and communications
systems.
Shunt Surge protection devices alone do not help modify the
excessive wavefront characteristics of lightning. The high rate
of current rise (dI/dt) and the rate of induced voltage rise (dV/dt)
are properties of the lightning waveform which are often the
principle causes of damage to sensitive electronic components
and equipment.
The DINLINE Surge Diverters (DSD) offer economical and reliable protection from transients on power lines with the convenience of easy
installation on 35 mm DIN rail mountings.
The DSF and TDF product range is therefore designed to provide
suitable low pass filter technologies that act to limit and slow
down the Output Voltage (or Let-through voltage under surge
conditions). The figure below illustrates the fundamental
performance difference between the DSD and DSF/TDF product
lines under surge conditions.
The DSD range includes the three phase DSD340 series for
simple installation into TN-C, TN-S and TT systems.
Alternatively multiple DSD1x units may be configured for
TN-C, TN-S, TN-C-S, TT & IT systems with surge ratings ranging form 10kA to 150kA.
OPEN CIRCUIT
CLOSED CIRCUIT
TEST
WAVEFORM
OUTPUT VOLTAGE (Volts)
TECHNICAL INFORMATION
TECHNICAL INFORMATION
DSD SHUNT-ONLY PROTECTOR
TIME (μs)
DSF/TDF SURGE FILTER
Internal thermal disconnect devices ensure safe isolation
during sustained and abnormal events on the distribution
network. Most units feature visual indication in the event of
such operation. In addition, select units are available with
voltage-free contacts for remote signaling if replacement is due.
12
www.erico.com
PROTECTION OF COMMUNICATIONS EQUIPMENT
Transients and surges caused by lightning, or switching of power equipment, affect communications signals carried on copper
cables. Telecommunications lines, industrial process control, coaxial feeders and computer networks are all vulnerable to surges,
which may be up to 20kA for some high-risk environments. In the field of communications surge protection, several product
variations are required to ensure all applications are met. Therefore ERICO® offers protection products to meet a wide variety of
applications, from telecommunication line protectors for either KRONE® or DIN connection to coaxial surge protectors suitable for
either BNC or N type coax cables.
The various product families and applications are summarised below:
Subscriber Line
Protection (SLP) and
High Speed Digital
Protection (HSP)
Product family
- High 20kA (8/20us)
surge rating
- KRONE LSA-Plus
Termination
- Both Single Stage
and Multi-Stage
models available
Co-axial Surge
Protectors (CSP)
- Robust, plug-in style
design
- Range of connections
types and operating
voltages available
- Wide operating
frequency from DC
up to 3GHz
Data Line Protectors
(DLP) / Data Equipment
Protectors (DEP) / Local
Area Network
Protectors (LAN)
- Range of connections
types available, from
DB to RJ45 and KRONE
- Wide range of operating
voltages and frequencies
available
- Surge Ratings from
500A to 20kA
depending on product
and application
Universal Transient
Barrier (UTB)
- High 20kA (8/20us)
surge rating
- Premium three
stage protection
- Self-resetting,
over-voltage and
over-current protection
Knowing where to install surge protection can be difficult. To
ensure cost-effective protection is provided for data, signaling
and control circuits, two issues need to be considered:
WHAT TYPE OF SPD IS APPROPRIATE FOR
EACH CIRCUIT TYPE AND LOCATION ?
Five parameters must be considered to ensure that surge
protection devices for use on data, signalling or control circuits
are suitable and do not adversely affect operation of the circuit.
1) SPDs are designed to clamp the excess transient voltage to
safe levels sustainable by the equipment, yet should not
interfere with the normal signalling voltages. As a guide, the
SPD clamping voltage should be selected to be approximately
20% higher than peak working voltage of the circuit.
2) The line current rating of the SPD should be sufficient to
handle the maximum expected signalling current.
3) The SPD bandwidth should be sufficient to allow
correct operation of the system without adverse
attenuation. For most SPDs, frequency attenuation data or
a maximum recommended baud rate is generally specified.
www.erico.com
4) The connection termination, mounting method, number of
lines to be protected and other physical aspects must be considered.
5) The SPD surge rating should be appropriate for the
intended location. For circuits internal to the building,
surge ratings of 1-5kA are generally sufficient. For the
protection of circuits that connect to exposed lines
entering or exiting the facility, 10-20kA is recommended.
WHERE SHOULD THE SPDs BE INSTALLED ?
Communications devices are at risk from transients being induced
onto the interconnecting signal lines. The use of surge protection
barriers, installed at either end of the lines, provides cost
effective mitigation. Communication or signal lines that enter
or exit the building pose the highest risk. In such circumstances,
protection devices should be installed at the point of entry or at
the equipment termination itself.
13
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
CADWELD ®/CADWELD ® PLUS
THE MOLECULAR BOND
THE CADWELD® MOULD
USING CADWELD PLUS
CADWELD® EXOTHERMIC CONNECTION
A welding process that eliminates the
connection by forming a molecular bond.
Connections are the weak point of all electrical circuits and especially
earthing circuits subjected to ageing and corrosion. The capacity of an
earthing circuit to protect the safety of personnel depends on the quality of
the connections made.
BS 6651 (1992) STATES :
"Any joint other than welded represents a discontinuity in the current
conducting system and is susceptible to variation and failure.”
THE CADWELD ® PROCESS
Polymeric
Cover
CADWELD PLUS
Package
Ignitor Strip
Graphite
Mould
Tap Hole
Conductor
The CADWELD® process provides a way to produce copper/copper,
copper/galvanized or plain steel, copper/copper clad steel,
copper/bronze/brass/stainless steel, steel/steel, molecular bonds with
no external energy or heat source.
Weld Cavity
The principle consists of bringing together a welding filler material and
ignition agent in a suitable graphite mould.
The reduction of copper oxide by aluminium produces molten copper
and aluminium oxide slag at extremely high temperatures.
The shape of the mould, its dimensions, and the size of the weldmetal,
are all dependent on the items to be welded and their size.
1
Installation Is Easy!
2
4 Simple Steps For Permanently Welded
Electrical Connections
CADWELD PLUS Control Unit initiates the reaction of
the metal crucible. The standard unit includes a 6-foot (1.8
meter) high temperature control unit lead. The lead attaches to
the ignition strip using a custom made, purpose-designed
termination clip.
After the termination clip is installed on the ignition strip, the
installer pushes and holds the ignition button to start a charging
and discharging sequence. Within a few seconds the control
unit sends a predetermined voltage to the ignition strip and the
reaction is initiated.
Insert CADWELD PLUS
package into mould
3
Press and hold control
unit switch and wait for
the ignition
14
Attach control unit
termination clip to
ignition strip
4
Open the mould and
remove the expended
steel cup – no special
disposal required
www.erico.com
TECHNICAL INFORMATION
TECHNICAL INFORMATION
THE CADWELD® WELD
• Will carry more current than the conductor.
• Will not deteriorate with age.
• Is a molecular bond that eliminates any risk of
loosening or corrosion.
• Will resist repeated fault currents
• Can be quality controlled simply by visual
inspection.
RELIABILITY
As the molecular bond eliminates the concept
of surface contact, an electrolyte cannot penetrate
between the conductors and cause oxidation and
deterioration in the course of time.
CORROSIVE ENVIRONMENTS
This reliability is of particular interest for humid
or chemical environments or for
bonds directly buried in the ground.
CORROSION TEST
CONDUCTIVITY
The CADWELD connections form a solid bond
around the conductors assuring continuity. The
cross sectional area of the weld has greater
current carrying capacity than the conductors.
CADWELD'S fine performance is due
to its reliability resulting from the
molecular bond.
SET CABLE/CABLE
2 SAMPLES
MECHANICAL
2 SAMPLES
SET
CABLE/CABLE
4 SAMPLES
END 4 SAMPLES CADWELD
CABLE/CABLE
3 SAMPLES
CADWELD
Comparison between CADWELD
Bonded Connection and Mechanical
Connection CADWELD Weld (Metal A)
(Metal B).
The CADWELD bonded connection provides permanent conductivity over the
whole of the section due to molecular bonding between the metal surfaces.
PERFORMANCE
Standard CADWELD welds have a cross
section greater than that of the conductors
to be joined, which compensates for the
difference in resistivity between the
conductor and the weld material.
Consequently, under fault conditions the
weld will always remain cooler than the
conductor.
If special applications do not allow for the
required increase in cross section to be
employed, the use of the formula:
R = p x l and V= R x l
S
will make it possible to define precisely the
resistance of the CADWELD® weld.
www.erico.com
TIME IN YEARS
The melting temperature of CADWELD filler
material is higher than the melting temperature of
copper (1082°C). For this reason, in the event
of abnormal heating due to a high fault
current, the conductor is destroyed before the
connection.
This accelerated ageing test, carried out
in a saline atmosphere at a controlled
temperature, demonstrates that
CADWELD ® welds retain all their
electrical properties during the period
of the test whereas the resistance of
mechanical connections increase with
time and this alters their conductive
properties.
RELATIVE RESISTANCE
ABILITY TO WITHSTAND HIGH
CURRENT
Comparison between CADWELD® Bonded Connection and Mechanical Connection
CADWELD WELD
(Metal A)
(Metal B)
The CADWELD bonded connection provides
permanent conductivity over the whole of
the section due to molecular bonding
between the metal surfaces.
15
MECHANICAL
CRIMPED CONNECTION
Line of current
Actual Contact Surface
The mechanical connection presents a significant
difference between the apparent contact surface
and the actual surface.
TECHNICAL INFORMATION
TECHNICAL INFORMATION
Nominal Wire Size
Cross
AWG
Sectional
Area (mm2)
#10
6
#8
10
#6
16
#4
25
#3
25
#2
#2 Solid
35
#1
#1 Solid
50
1/0 Solid
1/0
2/0 Solid
2/0
70
95
95
3/0
4/0 Solid
4/0
120
250 KCM
150
300 KCM
350 KCM
185
400 KCM
240
500 KCM
300
ERICO CADWELD
Mould Reference
1B
A7
1E
W2
1H
W3
1L
Y1
1Q
Y1
1V
1T
Y2
1Y
1X
Y3
2B
2C
2F
2G
Y4
Y5
Y5
2L
2P
2Q
Y6
2V
Y7
3A
3D
Y8
3H
Y9
3Q
Y0
Number
Nominal
of Strands Diameter of
Strands
(mm)
7
0.98
7
1.04
7
1.23
7
1.35
7
1.55
7
1.70
7
1.96
7
2.14
7
2.20
19
1.35
7
2.47
1
6.54
19
1.53
19
1.50
1
7.35
19
1.78
1
8.25
19
1.89
1
9.27
19
2.13
19
2.14
37
1.78
19
2.52
19
2.59
1
11.68
19
2.89
37
2.03
37
2.07
37
2.25
37
2.29
37
2.47
37
2.52
37
2.64
61
2.25
61
2.30
61
2.52
Nominal Nominal
Cable
Cable
Diameter Diameter
(mm)
(inch)
2.95
0.12
3.12
0.12
3.71
0.15
4.05
0.16
4.67
0.18
5.10
0.20
5.89
0.23
6.42
0.25
6.60
0.26
6.75
0.27
7.42
0.29
6.54
0.26
7.65
0.30
8.43
0.33
7.35
0.29
8.90
0.35
8.25
0.32
9.46
0.07
9.27
0.36
10.65
0.42
10.70
0.42
12.46
0.49
12.60
0.50
12.95
0.47
11.68
0.46
13.41
0.53
14.21
0.56
14.61
0.58
15.75
0.62
16.00
0.63
17.30
0.68
17.64
0.69
18.49
0.73
20.25
0.80
20.65
0.81
22.68
0.89
Nominal
Strand
Area
(mm2)
0.75
0.85
1.19
1.43
1.89
2.27
3.02
3.60
3.80
1.43
4.79
33.62
1.84
1.77
42.41
2.49
53.49
2.81
67.43
3.56
3.60
2.49
4.99
5.27
107.22
6.56
3.24
3.37
3.98
4.12
4.79
4.99
5.47
3.98
4.15
4.99
Nominal
Wire Cross
Sectional
Area (mm2)
5.26
5.95
8.32
10.02
13.21
15.89
21.12
25.18
26.61
27.20
33.54
33.62
34.93
33.58
42.41
47.28
53.49
53.43
67.43
67.70
68.34
92.07
94.76
100.10
107.22
124.63
119.75
124.52
147.11
152.39
177.29
184.54
202.53
242.54
253.44
304.24
KCM was previously MCM, ie 1000 circular mils, a measure of the wire cross-sectional area.
Note that KCM "overstates" the true cross sectional area (measured in sq. mils) of a conductor by 4/π (i.e. 1.273)
1 mil = 0.001 inch
Square Inches x 1273 = KCM
Square Millimeters x 1.974 = KCM
KCM x 0.5607 = Square Millimeters
16
www.erico.com
ERITECH® LIGHTNING PROTECTION
ERITECH® SYSTEM 1000
ERITECH® SYSTEM 3000
CLT Terminal
Inline Coupling
Metallic Mast
Support Mast
ERITECH® ERICORE
Insulated Downconductor
Bare Downconductor
1 or 2 Required
The ERITECH® SYSTEM 3000 is a technically advanced lightning
protection system. The unique Collection Volume Method
design (CVM), and features of this system allow the
achievement of superior technical performance, and hence more
reliable lightning capture.
The ERITECH® SYSTEM 1000 SI Interceptor terminal is designed
and tested to the French Standard NFC17-102 and Spanish norm
UNE-21186. For applications up to 65 m tall, these standards
provide simple placement rules and determination of protected
area.
The ERITECH® DYNASPHERE air terminal provides a preferred
point for lightning discharges which would otherwise strike and
damage an unprotected structure and/or its contents. The
ERITECH DYNASPHERE is connected to a single insulated downconductor (ERITECH ERICORE) and the ground system in such a
way as to provide a totally integrated system.
www.erico.com
The terminals are erected with conductive masts and dependant
upon structure height and terminal location one or two bare
downconductors are required.
17
LIGHTNING PROTECTION
ESE Terminal
FRP Insulated Mast
ERITECH® LIGHTNING PROTECTION
ERITECH® SYSTEM 3000
INLINE COUPLING
ERITECH® DYNASPHERE AIR TERMINAL
LIGHTNING PROTECTION
702085
702089
Ø 70 mm
Reference code
Part No.
Description
D/SMKIV-SS
INTMKIV-SS
702085
702089
ERITECH® DYNASPHERE
ERITECH® INTERCEPTOR
1
1
Unit
weight kg
5
2
Reference code
Part No.
I/LCOUPL
701320
Unit
weight kg
10,5
1
ALUMINIUM MASTS
ERITECH® ERICORE DOWNCONDUCTORS
Ø 60 mm
Ø 68 mm
Reference code
Part No.
Unit
weight kg
Length (mm)
• • • Aluminium
Reference code
Part No.
Section
ERICORE/PER M
701875
50 mm2
Reference code
Part No.
• • • Terminations
ERICORE/TRM/OS 701915
ERICORE/TRM/IS 701895
ERICORE/LT KITA 702005
ALUM 3ME
ALUM 4M
ALUM 5M
ALUM 6M
Unit
weight kg
1,2 per meter
502000
701370
701380
701390
3000
4000
5000
6000
1
1
1
1
8,25
11
13
16
ALUMINIUM MASTS & BASES
Unit
weight
kg
Description
Factory Upper Termination, outside drum
Factory Upper Termination, inside drum
Lower Termination
1
1
1
1,5
1,5
1,5
225
mm
m
5m
22
Reference code
INSULATED MASTS
Part No.
Length (mm)
502040
701340
701350
701360
3000
4000
5000
6000
Unit
weight kg
• • • Aluminium
MBMAST3ME
MBMAST4M
MBMAST5M
MBMAST6M
1
1
1
1
9,6
12
15
17
Ø 61,9 mm
Ø 69,9 mm
MAST BRACKETS
702065
10 mm
701460
r=38
Reference code
Part No.
Colour
87 mm
Unit
weight kg
Length (mm)
90 mm
• • • Fiberglass reinforced
FRP/2M/WHITE
FRP/2M/BLACK
702040
702030
White
Black
2000
2000
1
1
31 mm
5
5
213 mm
195 mm
18
2
Reference code
Part No.
Description
7000250S4
UBOLT
702065
701460
Stainless steel mast bracket
Pair of UBOLTs
1
1 pair
Unit
weight kg
1,12
0,4
www.erico.com
ERITECH® LIGHTNING PROTECTION
ERITECH® DYNASPHERE/ERITECH®
INTERCEPTOR SI ADAPTORS
702297
702298
Reference code
701840
702299
701990
701410
701420
702296
702301
Reference code
Part No.
CONSAD/E2
CONSAD/FX
CABTIE-SS
701990
701410
701420
Unit
weight kg
0,19
0,01
0,05
5
100
1
LIGHTNING EVENT COUNTER
702306
Meets NFC-17100/NFC-17102
Part No.
Unit
weight
kg
Description
ER1-ARCC-SS
101925
Adaptor to fix ARC to ER1-xxx-SS*
THERMLUGCOUPL 701840
For bare downconductor
INTCPT-ADBUTT 702296
For SI terminal to FRP
INTCPT-ADF2BSPF 702297
SI terminal to 2” pipe. British thread
INTCPT-ADF2NSP 702298
SI terminal to 2” pipe. USA thread
INTCPT-ADM3/4UNC 702299
SI terminal to 3/4” pipe. USA thread
INTCPT-ADM116UN 702301
SI terminal to ER2-xxxx-SS*
INTCPT-ADM16 702306
16mm Conventional Rod to ER2-xxxx-SS*
* See ERITECH® INTERCEPTOR SI Masts
1
1
1
1
1
1
1
1
0,1
0,1
0,05
0,1
0,1
0,1
0,1
0,1
Reference code
Part No.
LEC-IV
702050
Unit
weight kg
2
1
ERITECH® SYSTEM 1000
ERITECH® INTERCEPTOR SI AIR TERMINAL
GUY RING
Reference code
Part No.
Description
SI25
SI40
SI60
701535
701536
701537
ESE, 25μs
ESE, 40μs
ESE, 60μs
1
1
1
Unit
weight kg
3
3
3
ERITECH® INTERCEPTOR SI MASTS
Reference code
Part No.
in
701280
60
ø mm
Unit
weight kg
out
ERITECH INTERCEPTOR SI
• • • Aluminium
GUYRING
91
1
0,11
ER1
ER3
GUY KIT
ER2
OR
ER3-BASE
ER2-BASE
Reference code
Part No.
Unit
weight kg
Description
• • • Stainless Steel
Reference code
Part No.
Description
GUYKIT 4MGRIP
GUYKIT 7MGRIP
701305
701315
4m vertical guy
7m vertical guy
www.erico.com
1
1
ER1-1000-SS
ER1-2000-SS
ER2-2000-SS
ER2-3000-SS
ER2-BASE
ER3-2000-SS
ER3-3000-SS
ER3-BASE
Unit
weight kg
0,400
0,700
19
702255
702260
702265
702270
702290
702275
702280
702295
Upper Section, 1m
Upper Section, 2m
Mid Section, 2m
Mid Section, 3m
Base for ER2 mast
Lower Section, 2m
Lower Section, 3m
Base for ER3 mast
1
1
1
1
1
1
1
1
3,5
6,2
4,9
7,3
5,2
5,3
7,9
5,6
LIGHTNING PROTECTION
101925
ERITECH® ERICORE FIXINGS
ERITECH® LIGHTNING PROTECTION
LIGHTNING PROTECTION
ERITECH® SYSTEM 2000
PAGE 21
PAGE 25
PAGE 26
PAGE 24
PAGE 24
PAGE 21
PAGE 27
PAGE 25
PAGE 26
PAGE 21
PAGE 21
PAGE 23
PAGE 38
PAGE 26
PAGE 22
PAGE 22
PAGE 24
The ERITECH® SYSTEM 2000 lightning protection system is
comprised of these principal components:
• Air Termination Network
• Downconductors
• Grounding System
• Bonding
This Illustration is not drawn to scale, nor does it portray an actual or typical application.
It is designed to illustrate some of the major components of the ERITECH® SYSTEM 2000 Lightning
Protection System and their relationship with one another.
20
PAGE 26
PAGE 38
PAGE 22
PAGE 37
PAGE 38
PAGE 31-35
PAGE 24
PAGE 24
PAGE 24
PAGE 41
PAGE 23
Air terminal placement is designed using the computer aided design to
BS6651, NFC 17-100, AS1768 or NFPA 780. This ensures the most effective placement of air terminations on the structure. Downconductors
are positioned to provide the most direct path from the air termination
to a low impedance grounding system, to help ensure safe and
effective dissipation of the lightning impulse. Equipotential bonding
of all circuits and conductors is necessary to reduce ground potential
differences and to limit equipotential damage.
www.erico.com
ERITECH® LIGHTNING PROTECTION
AIR TERMINAL TO TAPE COUPLING/BRACKETS
Meets BS1432 C101/BS2897/AS1567
L 25mm
70 mm
Meets
BS1400/BS149
BS2897/AS1567
Ø 16.5mm
M16
Ø 27mm
TTR Series
Reference code
Part No.
Unit
weight kg
ø mm L mm
Reference code
711080
711090
711100
711110
711010
10
16
10
16
16
500
500
1000
1000
2000
1
1
1
1
1
0,480
0,750
1,100
1,510
3,000
711050
711060
710020
711070
10
10
16
16
500
1000
500
1000
1
1
1
1
0,190
0,380
0,265
0,530
Unit
weight kg
Material
• • • Threaded rod to tape coupling
• • • Copper
CAR0510
CAR0515
CAR1010
CAR1015
CAR2015
• • • Aluminium
AAR0510
AAR1010
AAR0515
AAR1015
Part No.
TTRC16
711210
TTRA16
711200
• • • Rod brackets
CBR015
711190
ABR015
711180
Copper
Aluminium
1
1
0,230
0,080
Copper
Aluminium
2
2
0,900
0,280
SIMPLE AIR TERMINAL
Meets NFC-17100
Extension Masts
Air Terminal
Number
height (m)
of mast
2,40
0
4,15
1 (ER1)
5,90
2 (ER1+ER2)
7,65
3 (ER1+ER2+ER3)
L 2m
MULTIPLE POINT AIR TERMINAL
1
Meets BS1432 C101/BS1400
BS2897/BS2874/AS1567
2
3
Lightning
Rod height
• • • Chrome - nickel plated copper
ASL-240-CC
101700
2,40 m
Reference code
Part No.
Reference code
Reference code
Part No.
CMPR
711120
ø mm L mm
16
500
1
Part No.
Unit
weight kg
Ømm
30
1
3,750
Unit
weight kg
Ømm
• • • Galvanized steel extension masts
Unit
weight kg
1,200
ER1-2000
ER2-2000
ER3-2000
101920
101930
101940
33
36
42
1
1
1
13,800
14,200
15,000
TRIPOD FOR MAST OR SIMPLE AIR TERMINAL
AIR TERMINALS BASES
ø int. maxi 50 mm
A
Meets
BS1400/BS1471
AS1866/AS1567
A
B
Meets NFC-17100/NFC-17102
800 mm
B
385 mm
RSC
ATBC/ATBA
Reference code
Reference code
Part No.
Unit
weight kg
A mm B mm
www.erico.com
711150
711160
711170
10
16
16
25
25
31
1
1
1
0,500
0,500
1,700
711130
711140
10
16
25
25
1
1
0,160
0,160
Nr
of masts
101950
0-3
Unit
weight kg
• • • Galvanized steel
TFS 800
• • • Copper
ATBC10
ATBC15
RSC115
• • • Aluminium
ATBA10
ATBA15
Part No.
21
1
8,280
LIGHTNING PROTECTION
AIR TERMINALS
ERITECH® LIGHTNING PROTECTION
WATERPROOF CONE/AERIAL SPARK GAP
STRIKING RODS
Meets NFC-17100
LIGHTNING PROTECTION
6-50mm Ø
Reference code
Part No.
WPC
SG-AERIAL-302
702230
702285
Unit
weight kg
0,070
0,500
1
1
Reference code
SET OF TWO 54 cm BRACKETS
Meets NFC-17100/NFC-17102
550 mm
670 mm
Lightning
rod height
Part No.
• • • Chrome - nickel plated copper
ARC-2205-CNC
101900
ARC-2210-CNC
101910
• • • Stainless steel
ARC-2205-SS
102000
ARC-2210-SS
102010
Unit
weight kg
0,50m
1m
1
1
0,550
0,800
0.50m
1m
1
1
0,500
0,750
AIR TERMINAL BASES AND FASTENERS
102350
102410
102400
38-77 mm
Reference code
Part No.
LSEB 4554
702180
1 pair
Unit
weight kg
10,5
102460
102500
702165
BRACKETS FOR MAST OR AIR TERMINAL
102450
Meets NFC-17100
NFC-17102
280 mm
40 mm
90 mm
Reference code
Part No.
ASB-TCA
102350
Base rod support and cross-over
1
Unit
weight kg
0,250
ASP-100-TS
ASA-TB
ABFF-6530-TC
ABFR-6530-TC
102400
102410
102450
102460
Support plate
Angle support plate
For flat conductor (30x2)
For round conductor (8mmø)
1
1
1
1
0,430
0,200
0,070
0,050
ASFR-C
TMC-SS
102500
702165
Cement block support
Tape to Mast Clamp
10
1
1,000
0,200
Description
120 mm
Ø 28-55mm
Reference code
Unit
weight kg
Part No.
• • • Galvanized steel
ALOF1-GS
702175
1
1,500
FASTENERS FOR AIR TERMINAL
X-SHAPED BRACKET
102620
102600
Meets NFC-17100
Meets NFC-17100/NFC-17102
102610
ATR-10-SS
102600
M10 threaded rod, 100 mm long
10
Unit
weight kg
0,080
ACB-10-SS
102610
10
0,060
AEM-10-SS
102620
Supporting anchor bolt*
Angle support plate
Expanding support pin, M10
85 mm long, drilling depth 60 mm
10
0,040
Reference code
Reference code
ACF-2-GS
Part No.
103100
Description
Set of 2
Fasteners
Admissible
ø mm
30 to 50
1
Unit
weight kg
2,10
Part No.
Description
*Supplied with impermeable collar
22
www.erico.com
ERITECH® LIGHTNING PROTECTION
PUDDLE FLANGES
NON METALLIC DC TAPE CLIPS
Meets
BS1432C101/BS2897
150 mm
3mm
Meets BS1400/BS1471
150 mm
Reference code
Part No.
Material
PFC001
PFA001
710290
710295
Copper
Aluminium
1
1
Unit
weight kg
-
Reference code
PDC253BN
711280
Brown
PDC253GY
711290
Grey
• • • For use with 50x6 bare Cu/Al tape
PDC506BL
711360
Black
• • • For use with 25x3 PVC covered Cu/Al tape
PDC25WH
711350
White
PDC25BN
711310
Brown
PDC25BL
711300
Black
PDC25GN
711320
Green
PDC25GY
711330
Grey
PDC25ST
711340
Stone
Meets BS1400/BS1471/BS2874
BS2897/AS1567
Part No.
50
50
0,01
0,01
50
0,02
50
50
50
50
50
50
0,01
0,01
0,01
0,01
0,01
0,01
Unit
weight kg
Description
SLATE HOLDFAST NON METALLIC
DC CLIP & GLAZING BAR HOLDFAST
• • • Copper
DCC203
711630
DCC253
711220
DCC254
711640
DCC256
711230
DCC313
711650
DCC316
711660
DCC383
711670
DCC385
711680
DCC386
711690
DCC503
711700
DCC504
711710
DCC506
711240
DCC600
711250
DCC605
711260
DCC610
711270
• • • Aluminium
DCA253
711730
DCA256
711740
DCA506
711750
DCA600
711760
Unit
weight kg
Colour
• • • For use with 25x3 bare Cu/Al tape
DC TAPE CLIPS
Reference code
Part No.
for 20x3 bare copper tape
for 25x3 bare copper tape
for 25x4 bare copper tape
for 25x6 bare copper tape
for 31x3 bare copper tape
for 31x6 bare copper tape
for 38x3 bare copper tape
for 38x5 bare copper tape
for 38x6 bare copper tape
for 50x3 bare copper tape
for 50x4 bare copper tape
for 50x6 bare copper tape
for 25x3 PVC covered Cu tape
for 25x6 PVC covered Cu tape
for 50x6 PVC covered Cu tape
50
50
50
50
25
25
25
25
25
25
25
25
50
50
25
0,050
0,070
0,070
0,080
0,090
0,090
0,120
0,130
0,014
0,015
0,015
0,160
0,100
0,130
0,260
for 25x3 bare aluminium tape
for 25x6 bare aluminium tape
for 50x6 bare aluminium tape
for 25x3 PVC covered Al. tape
50
50
25
25
0,030
0,080
0,050
0,040
Reference code
Part No.
Meets
BS1400
BS2874
GB
HF
Unit
weight kg
Colour
• • • For 25x3 bare tape
HF250BN
711800
Brown
HF250GY
711810
Grey
• • • For 25x3 PVC covered tape
HFP253BN
711820
Brown
HFP253GY
711830
Grey
HFP253ST
711840
Stone
GLAZING BAR HOLDFAST
Reference code
50
50
0,020
0,020
50
50
50
0,020
0,020
0,020
Meets BS1400/BS2874
Unit
weight kg
Part No.
• • • Copper
BARE TAPE CLIPS
GBH C
Meets BS2870/BS1471
GBH A
w
710300
5
-
710305
5
-
• • • Aluminium
ONE HOLE CABLE CLIP
Meets BS2879/BS1474
l
W
Reference
code
Part No.
Description
l
w
mm mm
Unit
weight
kg
A
• • • Copper
TAPC203 711560 for 20x3 bare copper tape clip
TAPC253 711570 for 25x3 bare copper tape clip
TAPC506 711590 for 50x6 bare copper tape clip
• • • PVC Covered Copper
TAPC254 711580 for 25x3 PVC covered copper
40
40
69
15
15
15
25
25
25
0,500
0,500
0,800
44.5
15
25
0,500
40
40
15
15
25
25
0,100
0,100
Reference code
PC008C
PC010C
• • • Aluminium
PC008A
PC010A
tape clip
711540
711550
www.erico.com
for 20x3 bare aluminium tape clip
for 25x3 bare aluminium tape clip
ø
mm
A
mm
W
mm
Unit
weight kg
711380
711390
8
10
28
42
10
15
50
50
0,01
0,01
711370
711040
8
10
28
42
10
15
50
50
0,01
0,01
• • • Copper
• • • Aluminium
TAPA203
TAPA253
Part No.
23
LIGHTNING PROTECTION
450 mm
ø 5/8”
ERITECH® LIGHTNING PROTECTION
PLATE TYPE TEST CLAMP
PROTECTIVE SLEEVE FOR DOWN CONDUCTOR
ø 21mm 40 mm
Meets BS1400
Meets
BS1449-1
BS970
AS1397
NFC-17100
NFC-17102
PCF-40-GS
2m
10 mm
PCR-27-GS
2m
100 mm
LIGHTNING PROTECTION
25 mm
AVG3.0
55 mm
3m
Reference code
Part No.
Description
711450
26x12 mm
Unit
weight kg
Reference code
• • • Copper
Part No.
Unit
weight kg
Description
• • • Galvanized
PCT400
1
0,60
SQUARE TAPE CLAMP
Meets BS1471/BS2874/BS1400
PCF-40-GS
102800
PCR-21-GS
102850
AVG3.0
711030
Protective sleeve for
down conductors
Protective sleeve for
round down conductors
Anti vandal guard
1
1
1
0,90
1
2,90
BRASS SUPPORT FOR DOWNCONDUCTOR
52 mm
Reference code
Part No.
Unit
weight kg
Description
50 mm
• • • Copper
STC253
STC256-506
• • • Aluminium
STA253
711410
711425
25x3 mm
25x6 mm to 50x6 mm
5
5
0,200
0,770
711400
25x3 mm
5
0,090
Meets NFC-17100/NFC-17102
17 mm
Reference code
Part No.
SR
545260
50
Unit
weight kg
0,027
BI-METALLIC CONNECTORS
Meets BS970/BS1471/BS2874
711490 711500 711480
ANCHOR WITH LEAD PIN
Reference code
Part No.
Unit
weight kg
Description
• • • Stainless Steel
BIM800
711490
BIM900
711500
• • • Copper / Aluminium
BIM700
711480
25x3 mm
Meets NFC17100/NFC-17102
102455
107500
round max 8 mm
5
5
0,200
0,200
25x3 mm
5
0,190
Reference code
Part No.
Description
107500
102455
with lead pin
Unit
weight kg
• • • Galvanized
SDH-3-GI
PC302GS
50
1
0,021
0,010
MULTIPURPOSE CLAMP
OBLONG TEST OR JUNCTION CLAMP
Meets BS1471
BS2874/BS1400
Meets NFC-17100/NFC-17102
56 mm
8 mm
26 mm
Reference code
Unit
weight kg
Part No.
Description
711440
26x8 mm
2
0,290
711430
26x8 mm
2
0,100
Reference code
• • • Copper
OCB268
• • • Aluminium
OBA268
Part No.
Unit
weight kg
Material
• • • Round 8 mm max or tape 30 mm max
CCFR-308
CCS-308
CCG-308
24
545270
545170
545180
Brass
Stainless steel
Galvanized steel
25
25
25
0,150
0,150
0,150
www.erico.com
ERITECH® LIGHTNING PROTECTION
SUPPORT FOR HIP OR RIDGE TILES
Meets NFC-17100/NFC-17102
105400
r=93
Reference code
Unit
weight kg
Part No.
Reference code
• • • For Round max 10 mm or flat max 30 mm
CCJ-70-CA
102700
1
104350
Meets NFC-17100/NFC-17102
104450
Part No.
Unit
weight kg
Conductor
• • • Diameter 180-260 mm, plastic / stainless steel
0,4
SUPPORT HOOKS FOR ROOF TILES
105300
T1-SRL-25/6
T1-SFT-25
105300
105400
6 mm Ø
5-11 mm Ø or 30x2 mm
10
10
0,092
0,105
SUPPORT FOR ROUND CONDUCTOR
35
80
23
Reference code
Part No.
Unit
weight kg
Conductor
Reference code
• • • Plastic / Stainless steel 55 mm height
R2-SRL-25
R2-SFT-25
104350
104450
Part No.
Unit
weight kg
Conductor
• • • Plastic 16 mm height
6 mm Ø
5-11 mm Ø or 30x2 mm
50
50
0,038
0,052
SRL-23-N6
SRL-23-N8
SRL-23-N10
103700
103710
103720
6 mm Ø
8 mm Ø
10 mm Ø
50
50
50
0,008
0,008
0,008
SUPPORTS WITH ADJUSTABLE FASTENING PLATE
Meets NFC-17100/NFC-17102
23
PLASTIC SUPPORT BLOCK
Ø6
106310
175
Meets NFC-17100/NFC-17102
106300
ø 110
35
106200
Reference code
Part No.
Unit
weight kg
Conductor
Reference code
• • • Plastic / Stainless steel 35mm height
R1-SRL-25A6
R1-SFT-25
104200
104300
6 mm Ø
5-11 mm Ø or 30x2 mm
50
50
0,042
0,042
Part No.
Conductor
Unit
weight kg
Height
• • • Plastic
SFRR-SRL-45/6
SFRR-SFT-45
SFRR-SFT-65
FIXOBAND
106200
106300
106310
6 mm Ø
5-11 mm Ø or 30x2
5-11 mm Ø or 30x2
45mm
45mm
65mm
10
10
10
0,014
0,028
0,029
SLIDE RAIL FOR ROOF TILE OR TILE SLATE
Meets NFC-17100/NFC-17102
104950
104980
Reference code
Part No.
CEI20
FEI20
BEI20
42014
591080
591230
591280
591290
www.erico.com
Description
Stainless steel bonding
100
Stainless steel buckle
50
Stainless steel serrated buckle 100
Fixoband Tool
1
Unit
weight kg
0,009
0,104
0,017
1,800
Reference code
Part No.
Unit
weight kg
Conductor
• • • Plastic / stainless steel 40mm height
R6-SRL-40/6
R6-SFT-40
25
104950
104980
6 mm Ø
5-11 mm Ø or 30x2
50
50
0,069
0,083
LIGHTNING PROTECTION
EARTH TESTING CLAMP
ERITECH® LIGHTNING PROTECTION
PLASTIC SUPPORT FOR DOWNCONDUCTOR
104600
Meets
NFC-17100/
NFC-17102
107660
52
107650
40
T CONNECTOR
Meets NFC-17100
40 mm
45 mm
LIGHTNING PROTECTION
25
Reference code
Part No.
Unit
weight kg
Conductor
Reference code
Part No.
Material
101230
710030
710040
Galvanized
Copper
Aluminium
Unit
weight kg
• • • 8 mm diam.
• • • Plastic
SFT-23-N
SFTP-23-N
R3SFT-25
107650
107660
104600
5-11 mm Ø or 30x2 mm
5-11 mm Ø or 30x2 mm
5-11 mm Ø or 30x2 mm
50
50
50
CTR-10
CTR-8CU
CTR-8AL
0,020
0,020
0,037
25
10
10
0,12
-
CROSS CONNECTOR
STAINLESS STEEL CLIP 30X2
Meets
NFC17100/
NFC-17102
38mm
Meets NFC-17100/NFC-17102
28 mm
28 mm
18mm
TAPS302
ALD-TAP302
Reference code
Part No.
TAPS302
ALD-TAP302
711620
711195
100
100
Reference code
Unit
weight kg
0,002
-
Part No.
Material
101250
101260
101265
Stainless steel
Copper
Galvanized steel
Unit
weight kg
• • • 6-8 mm diam.
CCR-68-S
CCR-68-CU
CCR-68-GS
25
25
25
0,48
0,54
-
BLOCKS FOR ROUND OR FLAT CONDUCTORS
Meets NFC-17100/NFC-17102
SLIDE FASTENER ROOFSTILE FOR CONDUCTORS
Meets NFC-17100/NFC-17102
80mm
190mm
Reference code
SFR-BC-8
SFT-BC
SFT-BE
Part No.
106030
106080
106060
Conductor
Unit
weight kg
Fill
8 mm Ø
Concrete 20
5-11 mm Ø or 30x2 Concrete 20
5-10 mm Ø or 30x2 Empty 100
0,970
0,982
0,100
STRAIGHT CONNECTOR
Reference code
Part No.
R7-SFT-20
702250
HOT STICKING STRIP
Meets NFC-17100
101240
10
Unit
weight kg
0,05
Meets NFC-17100/NFC-17102
35 mm
150 mm
Reference code
Part No.
Unit
weight kg
Conductor
• • • Galvanized steel
CLR-10
101240
9 mm Ø
25
0,11
26
Reference code
Part No.
HSF
702240
10
Unit
weight kg
0,02
www.erico.com
ERITECH® CONDUCTORS
BARE COPPER TAPE
COPPER CABLE
Width
(A)mm
TC-EC-1215-30
710460
12
TC-EC-1230-30
710470
12
TC-EC-2015-30
710480
20
TC-EC-2030-30
710490
20
TC-EC-2515-30
710500
25
TC-EC-2530-25
710515
25
TC-EC-2530-50
710510
25
TC-EC-2540-30
710520
25
TC-EC-2560-15
710535
25
TC-EC-3020-30
197650
30
TC-EC-3160-30
710540
31
TC-EC-3650-50
710545
36
TC-EC-3850-10
710555
38
TC-EC-3860-30
710560
38
TC-EC-5030-30
710570
50
TC-EC-5060-20
710580
50
Minimum Order Quantity to Consider
Reference code
WITHOUT INSULATION
Reference code Part No.
SC-EC-10
SC-EC-16
SC-EC-25
SC-EC-35
SC-EC-50
SC-EC-70
SC-EC-95
SC-EC-120
SC-EC-150
SC-EC-185
710880
710890
197900
197910
197920
197930
197940
710900
710920
197950
Strand
Description
7x1,45
7x1,60
7x2,14
7x2,52
19x1,78
19x2,14
19x2,52
37x2,00
37x2,25
37x2,50
Section
mm2
10
16
25
35
50
70
95
120
150
185
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
Unit
weight kg
0,12/m
0,13/m
0,23/m
0,31/m
0,46/m
0,62/m
0,85/m
1,03/m
1,33/m
1,61/m
Minimum Order Quantity to Consider
Part No.
Thick.
(B)mm
1,5
3,0
1,5
3,0
1,5
3,0
3,0
4,0
6,0
2,0
6,0
5,0
5,0
6,0
3,0
6,0
30 m
30 m
30 m
30 m
30 m
25 m
50 m
30 m
15 m
30 m
30 m
50 m
10 m
30 m
30 m
20 m
Unit
weight kg
0,17/m
0,33/m
0,27/m
0,53/m
0,33/m
0,67/m
0,67/m
0,89/m
1,34/m
0,53/m
1,65/m
1,61/m
1,70/m
2,04/m
1,34/m
2,64/m
TINNED COPPER TAPE
Meets (IC-EC) CEI 1024-1 - Meets (IC-ECH)
BS6004/6491X/AS1746/EN50164-2
Meets BS1432C101/BS6746/
AS1567/NFC 17100/
NFC 17102/EN50164-2
Reference code
Part No.
TC-ECT-2020-30
TC-ECT-2530-30
TC-ECT-3020-30
TC-ECT-3020-75
TC-ECT-4030-30
TC-ECT-4040-35
197700
197720
197710
545200
197970
197975
WITH GREEN / YELLOW INSULATION
Strand
Description
Section
mm2
198000
198010
198020
204x0,395
286x0,395
408x0,395
25
35
50
50 m
50 m
50 m
0,27/m
0,37/m
0,53/m
198130
198050
198060
198070
198080
198090
710980
710990
711000
710970
198100
7x1,60
7x2,14
7x2,52
19x1,78
19x2,14
19x2,52
37x2,03
37x2,25
37x2,52
61x2,25
61x2,52
16
25
35
50
70
95
120
150
185
240
300
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
0,26/m
0,36/m
0,52/m
0,72/m
0,98/m
1,16/m
1,54/m
2,10/m
2,50/m
3,13/m
Reference code Part No.
Unit
weight kg
•••
IC-EC-25
IC-EC-35
IC-EC-50
•••
IC-ECH-16
IC-ECH-25
IC-ECH-35
IC-ECH-50
IC-ECH-70
IC-ECH-95
IC-ECH-120
IC-ECH-150
IC-ECH-185
IC-ECH-240
IC-ECH-300
Width
(A)mm
20
25
30
30
40
40
30 m
30 m
30 m
75 m
30 m
35 m
Unit
weight kg
0,36/m
0,67/m
0,53/m
0,53/m
1,06/m
1,42/m
Minimum Order Quantity to Consider
PVC COVERED COPPER TAPE
Meets BS1432C101/BS6746/
AS1567/EN50164-2
CT
Dimensions
AmmxBmm
CTBL253-25
710595
Black
25x3,0
CTBN253-25
710605
Brown
25x3,0
CTGN253-25
710616
Green
25x3,0
CTGY253-25
710645
Grey
25x3,0
CTST253-25
710655
Stone
25x3,0
CTWH253-25
710666
White
25x3,0
CTYGN253-25
710667
Yell./Green 25x3,0
CTGN256-30
710620
Green
25x6,0
CTGN506-20
710630
Green
50x6,0
Minimum Order Quantity to Consider
Reference code
Minimum Order Quantity to Consider
Part No.
Colour
LSF COVERED COPPER TAPE
Reference code
Part No.
27
25 m
25 m
25 m
25 m
25 m
25 m
25 m
30 m
20 m
Unit
weight kg
0,77/m
0,77/m
0,77/m
0,77/m
0,77/m
0,77/m
0,77/m
1,55/m
2,95/m
Meets BS1432 C101/BS6746/AS1567
Colour
LSF-253
710615
Green
Minimum Order Quantity to Consider
www.erico.com
Thick.
(B)mm
2,0
3,0
2,0
2,0
3,0
4,0
Dimensions
AmmxBmm
25x3,0
50 m
Unit
weight kg
0,77/m
CONDUCTORS
Meets BS1432 C101/AS1567/
NFC17-100/NFC17-102/
CEI1024-1/EN50164-2
Meets BS125/BS6360/AS1746/
CEI1024-1/EN50164-2
ERITECH® CONDUCTORS
Meets BS1432 C101
LEAD COVERED COPPER TAPE
Width
(A)mm
LCT-253
710625
25
Minimum Order Quantity to Consider
Reference code
Part No.
Thick.
(B)mm
3,0
COPPER PLATES AND LATTICES / GRIDS
Unit
weight kg
2,56/m
50 m
WM
PC
Mesh: 115 x 55 mm
PLAIN COPPER BARS
EML
Meets BS1433/BS2874 C101
SRGB
CONDUCTORS
Tape = 50 x 0,40 mm
Reference code
Part No.
HDB2003
HDB2503
HDB2506
HDB3806
HDB5006
HDB5010
710670
710680
710690
710700
710710
550900
Dimensions
mm
20x3x4000
25x3x4000
25x6x4000
38x6x4000
50x6x4000
50x10x4000
Unit
weight kg
2,14
2,68
5,34
8,00
10,68
17,80
1
1
1
1
1
5
Meets BS1432 C101/EN50164-2
COPPER PLATES
Minimum Order Quantity to Consider
Reference code
Part No.
Dimensions mm
PC1.5-0606
PC3-0606
PC1.5-0909
PC2.-1020
PC3-0909
710190
710200
710210
504550
504590
600 x 600 x 1,5
600 x 600 x 3,0
900 x 900 x 1,5
1000 x 2000 x 2
900 x 900 x 3
Reference code
Part No.
THDB5060
710730
Minimum Order Quantity to Consider
Dimensions
mm
50x6x4000
Unit
weight kg
10,68
1
SOLID COPPER ROUND CONDUCTOR
SC
BARE SOLID COPPER ROUND CONDUCTOR
Reference code
Part No.
RC-EC-6
RC-EC-8
RC-EC-8-3
198150
198160
545210
ø
(D) mm
6
8
8
Cross
Section
28,3
50,3
50,3
100 m
100 m
30 m
Meets
BS1432C101/
AS1567/
NFC17100/
NFC17102/
EN50164-2
Unit
weight kg
0,25/m
0,45/m
0,45/m
1
1
1
1
1
5,000
9,600
11,510
35,600
21,630
Meets BS1432 C101
COPPER LATTICES AND GRIDS
Meets BS1433/BS2874 C101
TINNED COPPER BAR
Unit
weight kg
Part No.
Dimensions mm
EML663
710230
EML993
710240
WM3-2088-B
504500
WM2-1030-B
504510
WM3-1020-B
504520
WM2-1020-B
504530
• • • Galvanized steel
WMS-1030-B
504540
600 x 600 x 3
900 x 900 x 3
8800 x 2000 x 3
3000 x 1000 x 2
2000 x 1000 x 3
2000 x 1000 x 2
1
1
1
1
1
1
Unit
weight kg
3,980
7,200
54,000
5,000
5,400
4,000
3000 x 1000 x 3
1
8,700
Reference code
SIGNAL REFERENCE GRIDS
Unit
weight kg
Reference code Part No. Length (m) Width (m) Spacing (m)
SRGBC120
SRGBD100
SRGBE100
SRGBF100
SRGBG100
167900
167901
167902
167903
167904
36,57
30,48
30,48
30,48
30,48
2,44
3,04
3,65
4,26
4,87
0,60
0,60
0,60
0,60
0,60
1
1
1
1
1
86,18
90,72
104,33
127,01
145,15
SIGNAL REFERENCE GRID CONNECTOR & BRACKET
TINNED SOLID COPPER ROUND CONDUCTOR
Meets BS1432 C101/AS1567/NFC 17100/NFC 17102/EN50164-2
Reference code
Part No.
RC-ET-6
RC-ET-8
198200
198210
ø
(D)mm
6
8
Cross
Section
28,3
50,3
100 m
100 m
Unit
weight kg
0,25/m
0,45/m
PVC COVERED SOLID COPPER ROUND CONDUCTOR ø 8 mm
Meets BS1432 C101/BS6746/AS1567/EN50164-2
Reference code
Part No.
Colours
SCBL
SCBN
SCGY
SCST
710800
710810
710820
710830
Black
Brown
Grey
Stone
Cross
Section
50,3
50,3
50,3
50,3
50 m
50 m
50 m
50 m
SRGC46BR
SRGC46
Reference code
Part No.
Max. Size
SRGC46
SRGC46BR
167905
167906
Up to 25 mm2 stranded
25 mm pedestal
50
10
Unit
weight kg
0,10
0,13
Unit
weight kg
0,49/m
0,49/m
0,49/m
0,49/m
28
www.erico.com
ERITECH® CONDUCTORS
BARE ALUMINIUM TAPE
BARE ALUMINIUM ROUND CONDUCTOR
Meets BS2898/1350/AS1866/EN50164-2*
Reference code
Part No.
BAT-2030
FAT-253-50
BAT-2560
BAT-5060
710955
710740
710960
710965
Width
A mm
20
25
25
50
Thick
B mm
3
3
6
6
50 m
50 m
50 m
50 m
Meets BS2898/1350/AS1866/EN50164-2
Reference
code
RAW-8
ASCO8
Unit
weight kg
0,16/m
0,21/m
0,41/m
0,81/m
Part No.
198250
711530
Cross-section
mm2
50,3
50,3
D
ø mm
8
8
300 m
50 m
Unit
weight kg
0,14/m
0,14/m
Minimum Order Quantity to Consider
PVC COVERED ALUMINIUM TAPE
Meets BS2898/1350/AS1866/EN50164-2
Meets BS2898/1350/AS1866/EN50164-2
Reference
code
ATBL253
ATBN253
ATGY253
ATST253
ATWH253
Part No.
710750
710760
710770
710780
710790
Width Thick
A mm B mm
25
3
25
3
25
3
25
3
25
3
Colours
Black
Brown
Grey
Stone
White
50 m
50 m
50 m
50 m
50 m
Unit
weight kg
0,30/m
0,30/m
0,30/m
0,30/m
0,30/m
Reference
code
SABL
SABN
SAGY
SAST
D
Part No. Cross-section
mm2 ø mm Colours
710840
50,3
8
Black
710850
50,3
8
Brown
710860
50,3
8
Grey
710870
50,3
8
Stone
50 m
50 m
50 m
50 m
Unit
weight kg
0,18/m
0,18/m
0,18/m
0,18/m
BARE GALVANIZED STEEL TAPE
Meets DIN 48801 /NFC 17100/NFC 17102/
EN50164-2
BARE GALVANIZED ROUND CONDUCTOR
Meets NFC 17100/NFC 17102/EN50164-2
Reference
code
30TC-HGSP-3035
70TC-HGSP-3035
Part No.
197810
197790
Width Thick
A mm B mm
30
3,5
30
3,5
30 m
70 m
Unit
weight kg
0,82/m
0,82/m
BLACK STEEL TAPE
Reference
code
RSCC-8
RSCC-10
Meets EN50164-2
Reference
code
TC-BR-253
Part No.
140250
www.erico.com
Cross-section Dimensions
mm2
AxB mm
75
25x3
30 m
Unit
weight kg
0,590/m
29
Part No.
197860
197870
Cross-section
mm2
50,3
78,5
D
ømm
8
10
Unit
weight kg
100 m 0,400/m
100 m 0,630/m
CONDUCTORS
PVC COVERED ALUMINIUM ROUND CONDUCTOR
ERITECH® GROUNDING & BONDING
PAGE 37
GROUNDING & BONDING
PAGE 31-35
PAGE 28
PAGE 28
PAGE 38
PAGE 37
PAGE 49-53
PAGE 27
GROUNDING SOLUTIONS
• High strength corrosion resistant ERITECH® Ground Rods,
clamps and accessories
• Prefabricated wire mesh
• Ground Enhancement Material (GEM) greatly improves
ground grid resistance and impedance
• CADWELD® molecular bonding connections
RADIAL DESIGN
EQUIPOTENTIAL MESH ELECTRODES
30
www.erico.com
ERITECH® GROUNDING & BONDING
ERITECH® Copperbonded Pointed Ground Rods
ERITECH solid copper and stainless steel
threaded ground rods
•A uniform copper thickness provides better corrosion resistance in most soil
Type SCR (solid copper)
•C101 to comply with BS2874 for solid copper ground rods.
•For use in highly corrosive soil conditions.
conditions. Copperbonded rods last longer, drive easier and will not crack.
•Copper exteriors, molecularly bonded to nickel-sealed high-strength steel
cores, exceed the requirements of
ANSI®/UL® 467-1984 (ANSI C33.8-1972) and CSA®.
Rod to Cable Lug
(Split Clamps)
•Copper Coating: standard copper plating thickness exceeds UL and ANSI specs.
of 0.254mm, conforms to KEMA 83C and EN50164-2 Norms.
•The rods exceed a tensile strength of 515,000 kPa and straightness tolerance of
8.3 x 10-4m/m.
•Extending rods may be extended with use of threadless couplers.
•Manufactured
in Gunmetal (LG2) and Naval Brass to comply BS1400, CZ112,
BS2874
•Rod to Cable Lug clamps (threaded and unthreaded)
•Permits easy connection of ground conductors to both threaded and
unthreaded ground rods
Type SSR (Stainless steel)
•BS 970 - (A2 grade)
ERITECH® TYPE CC Threadless Couplings
for Copperbonded Pointed Rods
•Enables ground rods to be driven deep quickly and easily
without the risk of rod separation.
•Made of high-strength silicon bronze.
•Tapered so that when the rod is driven into the coupling,
ERITECH® Ground Rod Driver
the two parts compress to form a conductive connection.
Type DH
Tempered steel
Driving Heads
Couplers
This one tool enables driving of rods to ground level, without heavy
sledge-hammers or ladders and without deforming the end of the rod.
Heavy-duty steel construction provides robustness and excellent driving
force, while the soft rubber ergonomic grip provides user comfort.
GROUNDING & BONDING
Earthrod
Pigtail
ERITECH Copperbonded Sectional Ground Rods
•Copperbonded
externally coupled ground rods have all the features of standard
copperbonded rods plus cold-rolled threads at each end for joining with couplings.
•The cold-rolled threads of ground rods with their continuous unbroken grain flows
are stronger than cut-threads.
•High-strength couplings are threaded bronze and chamfered at both ends for easy
driving.
•Threaded coupling design allows for full contact of rod point with butt end of
preceding rod. These high strength, corrosion-resistant couplings ensure low
resistance copper-to-copper connections.
The ERITECH® Ground Rod Driver from
ERICO® is the simple, effective and
affordable way to install ground rods.
Couplers for threaded rods
The ERITECH® Ground Rod Driver includes driver
body with soft rubber grip, insert for driving rods to
ground level, and retaining collar which holds insert
in place during storage.
• Usable on all types of round ground rods: copperbonded,
galvanized, stainless steel
• 14,2 mm (5/8”) and 17,2 mm (3/4”) inserts are interchangeable with standard driver
Steel driving studs for sectional
ground rods
www.erico.com
body to enable easy driving of standard rods.
driver will not deform the end of the rod, making connection of the ground
conductor quick and easy
• Integral insert prevents driver from slipping off the rod near ground level.
• Convenient retaining collar holds the insert in the tool when not in use.
• Self-contained and easy to store.
• Saves time and money and dramatically reduces risks of employee injury.
• The
31
ERITECH® GROUNDING & BONDING
ERITECH® Galvanized steel ground rods
•Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion.
•Surfaces are rigidly inspected to eliminate seams, slivers and other defects.
Galvanized steel
compression
coupler
(threadless)
Driving
Points
Type DH
Tempered steel
Driving head
Connecting
Clamp
ERITECH Type CG
(X-Shaped Non-extensible)
•Steel quality DIN 17100
•Supplied with splice plate
•Compliant with DIN 48-452
•Zinc coating: minimum 55 μm, (average minimum 70 μm)
•Sections 50 x 50 x 3 and 50 x 50 x 5
ERITECH Type SG Round galvanized ground rods
(Extensible)
•Steel quality DIN 17100
•Compliant with CEI 7/6
•Zinc coating: minimum 78 μm, (average minimum 86 μm)
•Resistance:> 70 daN/mm2
ERITECH® Type Cloverleaf profile
European application only
(Non-extensible)
•Galvanized thickness 150 μm according to UTE 66-400.
•Resistance: > 70 daN/mm2
•Supplied with fitted splice socket.
Driving Head
Driving Point
Driving Accessories for SG ground rods
•Steel quality DIN 17100
•Compliant with CEI 7/6
•Zinc coating: minimum 78 μm,
(average minimum 86 μm)
GROUNDING & BONDING
•Resistance:> 70 daN/mm2
ERITECH Type SS Stainless steel ground rods
(Extensible)
•Stainless steel Z30 C13
•Resistance:> 90/100 daN/mm2
Extensible Rod
Driving Head
Type RG Round
(Non-extensible)
•Resistance: > 70 daN/mm2
•Supplied with fitted splice socket.
GROUND ENHANCEMENT MATERIAL (GEM)
Developed in 1992, GEM Ground
Enhancement Material is a superior
conductive material that solves your
toughest grounding problems.
EARTH RESISTANCE ANALYSER
GEM improves grounding effectiveness regardless of soil conditions. It is
the ideal material to use in areas of
poor conductivity such as rocky
ground, mountain tops and sandy soil.
Reference code
Part No.
EARTH ANALYSER
EST101
EST201
EST301
ESTREELKIT500
702100
702360
702370
702380
702350
1
1
1
1
1
GEM is also the answer in situations
where ground rods can't be driven. Or
where limited land area makes adequate grounding difficult with
conventional methods.
Unit
weight kg
8,3
4,64
10,54
11,98
7,71
Once GEM is installed, it maintains its low resistance for the life of the
project. GEM's performance is backed by rigorous independent tests and
proven field experience.
Technical data available upon request.
32
www.erico.com
ERITECH® GROUNDING & BONDING
ERITECH® COPPERBONDED GROUND RODS
Meets BS6651/C33,8
STANDARD TYPE
UL467/ASTM A37/
KEMA K83C/EN50164-2/BS7430
ERITECH COPPERBONDED GROUND RODS
THREADED TYPE, EXTENDING,
WITH THREADED COUPLER
Meets BS6651/C33,8
UL467/ASTM A37/EN50164-2/BS7930
• Electrolytically copperbonded steel
• Copper coating min. 250u according
Reference
Part No.
code
• • • Non extending
1,2M38
155000
1,5M38
155010
2,1M38
155030
3,0M38
155050
• • • Extending
1,2M12
155060
1,5M12
155070
2,1M12
155090
3,0M12
155110
1,2M58
155240
1,5M58
155250
2,1M58
155270
3,0M58
155290
1,2M34
155420
1,5M34
155430
2,1M34
155450
3,0M34
155470
to standard UL467
ø
Nominal Length
Approx.
inches ø mm
m feet
Unit
weight kg
3/8
3/8
3/8
3/8
9
9
9
9
1,2
1,5
2,1
3
4’
5’
7’
10’
5
5
5
5
0,650
0,800
1,100
1,600
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
12,5
12,5
12,5
12,5
14,2
14,2
14,2
14,2
17,2
17,2
17,2
17,2
1,2
1,5
2,1
3
1,2
1,5
2,1
3
1,2
1,5
2,1
3
4’
5’
7’
10’
4’
5’
7’
10’
4’
5’
7’
10’
5
5
5
5
5
5
5
5
5
5
5
5
0,800
1,150
1,600
2,300
1,500
1,900
2,650
3,750
2,150
2,750
3,800
5,450
• Rolled thread to preserve copper coating
Reference
code
S1,2M916
S1,5M916
S2,1M916
S3,0M916
S1,2M58
S1,5M58
S2,1M58
S3,0M58
S1,2M34
S1,5M34
S2,1M34
S3,0M34
Part No.
155180
155190
155210
155230
155300
155310
155330
155350
155480
155490
155510
155530
ø
inches
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
Approx.
ø mm
12,7
12,7
12,7
12,7
14,2
14,2
14,2
14,2
17,2
17,2
17,2
17,2
Nominal Length
m feet
1,2
4’
1,5
5’
2,1
7’
3
10’
1,2
4’
1,5
5’
2,1
7’
3
10’
1,2
4’
1,5
5’
2,1
7’
3
10’
5
5
5
5
5
5
5
5
5
5
5
5
Unit
weight kg
0,800
1,150
1,600
2,300
1,500
1,900
2,650
3,750
2,150
2,750
3,800
5,450
COUPLERS FOR THREADED RODS
Meets KEMA
K83C/BS6651/UL467/EN50164-2
DRIVING HEADS FOR COPPERBONDED
POINTED RODS
Reference code
Part No.
Rod ø
158120
158130
158140
1/2”
5/8”
3/4”
Unit
weight kg
• • • Tempered steel
DH12
DH58
DH34
5
5
5
Reference code
Rod ø
158030
158040
158050
9/16”
5/8”
3/4”
SC916
SC58
SC34
5
5
5
Meets BS97/BS436
resistance 6 micro-Ohms
• BZT-Copper couplers 99% Cu, typical mechanical
strength 10kN, typical resistance 4 micro-Ohms
Unit
weight kg
Part No.
Rod ø
158000
158010
158020
1/2”
5/8”
3/4”
5
5
5
0,108
0,134
0,202
156650
1/2”
5
0,087
156720
1/2”
5
0,102
• • • Bronze
CC12F
CC58
CC34
• • • Brass
BR12
• • • Copper
BZT-12
Reference code
Part No.
DS916
DS58
DS34
Unit
weight kg
Rod ø
• • • Tempered steel
DT12
DT58
DT34
www.erico.com
158060
158070
158080
1/2”
5/8”
3/4”
5
5
5
Part No.
Rod ø
158090
158100
158110
9/16”
5/8”
3/4”
Unit
weight kg
• • • Tempered steel
DRIVING POINTS FOR GROUND RODS
Reference code
0,104
0,086
0,172
DRIVING STUD FOR THREADED RODS
• BR-brass couplers 58% Cu, typical mechanical
Reference code
Unit
weight kg
• • • Brass
0,158
0,435
0,226
THREADLESS COUPLINGS FOR COPPERBONDED
POINTED RODS Meets KEMA K83C/BS6651/UL467/EN50164-2
Part No.
0,110
0,156
0,272
33
5
5
5
0,052
0,074
0,126
GROUNDING & BONDING
Meets KEMA
K83C/BS6651/UL467/EN50164-2
ERITECH® GROUNDING & BONDING
ERITECH EARTHROD PIGTAIL FOR GROUND RODS
ERITECH SOLID COPPER OR STAINLESS STEEL
GROUND RODS & ACCESSORIES
Meets BS6651/EN50164-2/BS7430
Reference
code
PT-12-25/3000
PT-12-25/300
PT-58-25/300
PT-58-35/300
PT-58-50/300
rod
ø
1/2”
1/2”
5/8”
5/8”
5/8”
Part No.
158600
158610
158675
158690
158290
Cable Cable
size mm2 lengh mm
25
3000
25
300
25
300
35
300
50
300
5
5
5
5
5
Unit
weight kg
0,645
0,180
0,200
0,200
0,365
SCR15-710070 - Copper
SCR20-710080 - Copper
ERITECH® SOLID COPPER INTERNAL
THREADED GROUND RODS TYPE SCR
GROUNDING & BONDING
ERITECH® HAMMERLOCK
Reference Part No.
code
EHL12FCW3 166950
EHL12FCY1 166951
EHL12FCY2 166952
EHL12FCY3 166953
EHL12FCY4 166954
EHL12FC1G 166955
EHL12FC1G1G 166956
EHL12FC1H 166957
EHL12FC1K 166958
EHL12FC1K1K 166959
EHL12FC1L 166960
EHL12FC1T 166961
EHL12FC1V 166962
EHL12FC6MM 166963
EHL12FC8MM 166964
EHL58CW3 166965
EHL58CY1 166966
EHL58CY2 166967
EHL58CY3 166968
EHL58CY4 166969
EHL58C1G 166970
EHL58C1G1G 166971
EHL58C1H 166972
EHL58C1K 166973
EHL58C1K1K 166974
EHL58C1L 166975
EHL58C1T 166976
EHL58C1V 166977
EHL58C2G 166978
EHL58C6MM 166979
EHL58C8MM 166980
EHL34CW3 166981
EHL34CY1 166982
EHL34CY2 166983
EHL34CY3 166984
EHL34CY4 166985
EHL34C1G 166986
EHL34C1H 166987
EHL34C1K 166988
EHL34C1L 166989
EHL34C1T 166990
EHL34C1V 166991
EHL34C2G 166992
EHL34C6MM 166993
EHL34C8MM 166994
rod
ø
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
Conductor
16 mm Stranded
25 mm2 Stranded
35 mm2 Stranded
50 mm2 Stranded
70 mm2 Stranded
#6 Solid
#6 Solid
#6 Stranded
#4 Solid
#4 Solid
#4 Stranded
#2 Solid
#2 Stranded
6 mm Solid
8mm Solid
16 mm2 Stranded
25 mm2 Stranded
35 mm2 Stranded
50 mm2 Stranded
70 mm2 Stranded
#6 Solid
#6 Solid
#6 Stranded
#4 Solid
#4 Solid
#4 Stranded
#2 Solid
#2 Stranded
#2/0 Stranded
6 mm Solid
8 mm Solid
16 mm2 Stranded
25 mm2 Stranded
35 mm2 Stranded
50 mm2 Stranded
70 mm2 Stranded
#6 Solid
#6 Stranded
#4 Solid
#4 Stranded
#2 Solid
#2 Stranded
#2/0 Stranded
6 mm Solid
8 mm Solid
2
Cond. Size
Cross Sect.
16 mm2
25 mm2
35 mm2
50 mm2
70 mm2
13.3 mm2
13.3 mm2
13 mm2
21.2 mm2
21.2 mm2
21 mm2
30 mm2
33 mm2
28 mm2
50 mm2
16 mm2
25 mm2
35 mm2
50 mm2
70 mm2
13.3 mm2
13.3 mm2
13 mm2
21.2 mm2
21.2 mm2
21 mm2
30 mm2
33 mm2
66 mm2
28 mm2
50 mm2
16 mm2
25 mm2
35 mm2
50 mm2
70 mm2
13.3 mm2
13 mm2
21.2 mm2
21 mm2
30 mm2
33 mm2
66 mm2
28 mm2
50 mm2
Cond. Size
Diam.
4,80 mm
6,40 mm
7,50 mm
8,90 mm
10,70 mm
4,70 mm
5,90 mm
6,50 mm
7,50 mm
6 mm
8 mm
4,80 mm
6,40 mm
7,50 mm
8,90 mm
10,70 mm
4,70 mm
5,90 mm
6,50 mm
7,50 mm
10,70 mm
6 mm
8 mm
4,80 mm
6,40 mm
7,50 mm
8,90 mm
10,70 mm
4,70 mm
5,90 mm
6,50 mm
7,50 mm
10,70 mm
6 mm
8 mm
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
SCR16-710010 - Stainless steel
Unit
weight kg
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,21
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,20
0,24
0,24
0,24
0,24
0,24
0,24
0,24
0,24
0,24
0,24
0,24
0,24
0,24
0,24
34
Reference code
Part No.
SCR15
SCR20
710070
710080
Rod ø
mm
15
20
Unit
weight kg
1,64
3,34
L
1,20 m
1,20 m
5
5
ACCESSORIES FOR SOLID COPPER THREADED
Meets BS2784 C101
GROUND RODS TYPE SCR
See ground rods type SCR page 14
Reference code
Rod ø
mm
Part No.
Unit
weight kg
• • • Steel driving stud (15 mm) for SCR15
CDS15
710090
15
5
0,020
15
5
0,050
• • • Steel driving stud (20 mm) for SCR20
CDS20
710100
• • • M10 Phosphor bronze internal coupling Dowel (PB102) for SCR15 and SCR20
PBD10
710110
10
5
0,020
15
5
0,020
20
5
0,050
• • • Driving point for SCR 15 (15 mm)
SPK15
710120
• • • Driving point for SCR 20 (20 mm)
SPK20
710130
STAINLESS STEEL INTERNAL THREADED
GROUND RODS TYPE SSR
Reference code
SSR16
Part No.
710010
diam. length
mm
m
16
1.20
Unit
weight kg
1,640
5
ACCESSORIES FOR STAINLESS STEEL
THREADED GROUND RODS TYPE SSR
Reference code
Part No.
Rod ø
mm
Meets BS970
316-S12
Unit
weight kg
• • • Steel driving stud (15 mm) for SSR16
CDS15
710090
15
10
5
0,020
5 0,156
0,020
15
5
0,020
• • • M10
DT58Stainless steel internal
158070coupling Dowel
25
SSD10
710115
5
6.10
• • • Driving point for SSR16
SPK15
710120
www.erico.com
ERITECH® GROUNDING & BONDING
ERITECH® GALVANIZED STEEL GROUND
RODS CLOVERLEAF PROFILE
ERITECH GALVANIZED STEEL GROUND RODS
TYPE CG (NON EXTENSIBLE) (X-SHAPED)
Meets
UTE C 66-400/DIN 48-452
Meets DIN 48-452
•
•
Supplied with splice plate
Zinc coating:
min 55 micron/ Average min. 70 micron
• Supplied with fitted
splice socket
Reference code
Part No.
Length m
156340
156350
156360
1
1,5
2
Unit
weight kg
Reference code
• • • Diameter 16 mm
1,0TG16TPWC
1,5TG16TPWC
2,0TG16TPWC
Part No.
Length m
158760
158770
158780
158790
158800
1
1,5
2
2,5
3
Unit
weight kg
• • • Section 50 x 50 x 3
5
5
5
1,0CG50/3
1,5CG50/3
2,0CG50/3
2,5CG50/3
3,0CG50/3
1,200
1,800
2,400
ERITECH GALVANIZED STEEL ROUND
GROUND RODS
•
Meets UTE C 66-400/DIN 48-452
•
5
5
5
5
5
Meets DIN 48-452
Supplied with splice plate
Zinc coating:
min 78 micron/ Average min. 86 micron
Reference code
Part No.
2,340
3,510
4,680
5,850
7,020
Unit
weight kg
Length m
1,0CG50/5
1,5CG50/5
2,0CG50/5
2,5CG50/5
3,0CG50/5
Reference code
Part No.
Length m
156370
156380
156390
1
1,5
2
Unit
weight kg
158710
158720
158730
158740
158750
1
1,5
2
2,5
3
5
5
5
5
5
3,900
5,850
7,800
9,750
11,750
• • • Diameter 16 mm
1,0RG16TPWC
1,5RG16TPWC
2,0RG16TPWC
5
5
5
1,700
2,500
3,400
ERITECH GALVANIZED STEEL GROUND RODS
TYPE SG (EXTENSIBLE)
Meets CEI 17/6
ERITECH STAINLESS STEEL GROUND RODS
TYPE SS (EXTENSIBLE)
•
•
Reference code
Part No.
1,5SG20
1,5SG25
1,5SG30
158810
158820
158830
www.erico.com
Length
m
1,5
1,5
1,5
ø mm
20
25
30
5
5
5
Unit
weight kg
3,705
5,600
8,600
35
Reference code
Part No.
15SS20
158540
Stainless steel Z30 C13
Resistance: > 90 / 100 daN / mm2
Length
m
1,5
ø mm
20
5
Unit
weight kg
3,700
GROUNDING & BONDING
• • • Section 50 x 50 x 5
• Supplied with fitted splice socket
ERITECH® GROUNDING & BONDING
ERITECH® DRIVING POINTS FOR
GROUND RODS SG & SS
ERITECH® GROUND ROD DRIVER
FOR GROUND RODS SG
Reference code
Part No.
Rod ø
mm
158400
158390
158480
20
25
30
Unit
weight kg
• • • Tempered steel
DT-P137-1-20
DT-P167-25
DT-P187-30
5
5
5
0,200
0,300
0,400
FOR GROUND RODS SS
Reference code
Part No.
Rod ø
mm
158550
20
Reference code
Part No.
EGRD58
158500
EGRD58L
158510
EGRD34
158520
EGRD34L
158530
1,5 m driver body with insert
for up to 14,2 mm
Replacement insert for
14,2 mm (5/8”)
Driver body with insert for
up to 17,2
Replacement insert for
17,2 mm (3/4”)
5
1
10,420
1
2,720
1
10,420
1
2,720
ERITECH® SADDLE AND ROD CLAMPS
Unit
weight kg
Meets BS1400
• • • Tempered steel
DT-P11-20-SS
Unit
weight kg
Description
range
Reference code areaConductor
(mm2)
ø mm
GUV16070
16-70
5,1-10,7
GUV70185
70-185
10,7-17,6
0,040
ERITECH DRIVING HEAD FOR
GROUND RODS SG & SS
Reference code
Nominal
Rod ø mm
Part No.
Unit
weight kg
• • • Gunmetal + Copper U bolt
Reference code
Part No.
Rod ø
mm
158380
20-30
UB16
UB20
UB25
GUV16070
GUV70185
Unit
weight kg
GROUNDING & BONDING
• • • Tempered steel
DH-TR167
5
Rod ø
mm
• • • Hot-galvanized steel - Tape capacity 40x3
MR127Z/20
158450
20
MR137/25
158460
25
MR187Z/30
158470
30
TO GROUND RODS SS
Rod ø
mm
• • • Hot-galvanized steel - tape capacity 40x3
MR127Z/20
158450
20
Reference code
Reference code
Unit
weight kg
5
5
5
5
0,200
0,200
0,210
0,390
0,390
Part No.
Clamp capacity
A mm B mm
158410
710345
710350
710360
26x12
31x10
51x12
26x10
Unit
weight kg
• • • Gunmetal
RTC1
RTC3020
RTC2051
RTC2526
0,400
0,500
0,600
16
20
20
25
10
10
10
10
0,160
0,310
0,230
ERITECH® CONNECTING SOCKETS FOR CABLE
TO GROUND ROD
Unit
weight kg
Part No.
10
10
10
5
5
Meets BS1400
TO GROUND RODS SG
Part No.
16
20
25
10-20
16-20
ERITECH® ROD TO TAPE DISCONNECT CLAMP
(type A)
0,200
ERITECH® CONNECTING FLANGES FOR TAPE
Reference code
710370
710380
710390
710400
710410
0,400
ERITECH CONNECTING CLAMP FOR CABLE
TO GROUNG RODS SG & SS
Reference code
Rod ø
mm
Part No.
Reference
Part No.
code
• • • Cuproaluminium
C142
158320
C162
158330
C174
158340
C205
158350
Unit
weight kg
• • • Copper/Steel - Cable capacity 70mm
2
S-136-20
158440
20
5
0,070
36
Rod
ø mm
Cable
capacity mm2
14,2
16
17,2
20
95
95
95
95
Unit
weight kg
5
5
5
5
0,072
0,068
0,068
0,098
www.erico.com
ERITECH® GROUNDING & BONDING
INSPECTION PITS
ERITECH ROD® TO CABLE CLAMPS (type C)
Meets BS2874/BS1400
Type C
103470
710180
Type CP
Conductor Capacity
Type C: Max 70 sq mm
Type CP: Max 25 sq mm
Reference code
Part No.
Rod
ø in mm
158150
158260
158160
158170
156900
156910
158250
9,0-9,0
12,5-12,7
12,5-15,0
14,2-17,2
14,2-19,0
14,2-20,0
Unit
weight kg
• • • Gunmetal
C38
C12
C58
C34
C19
C20
C1
• • • Bronze
CP38
CP12
CP58
CP34
158155
158265
158165
158175
Cond. size cross section
Max 16 sq mm
Max 25 sq mm
Max 25 sq mm
Max 25 sq mm
5
5
5
5
5
5
5
0,026
0,040
0,084
0,086
0,085
0,125
0,110
50
50
50
50
0,04
0,09
0,10
0,13
103450
ø 180 mm
100 mm
ø 140 mm
Reference
code
PIT03
IP-900-C
IP-R193x122MM
IP-SQ-180-CI
ERITECH® ROD TO TAPE LUG (SPLIT CLAMP)
Meets
BS2874/BS1400
Dimensions
mm
plastic 250x200x215
concrete 325x325x145
Cast iron 210x140x120
Cast iron
ø180
Part No.
Material
710180
103450
103470
103480
1
1
1
1
Unit
weight kg
1,350
27
7
2,400
EARTH BARS FOR INSPECTION PITS
Reference Part No.
code
• • • Gunmetal
RCC10
710420
RCC16
710430
SRC15
710440
SRC20
Unit
weight kg
Description
9,5 mm plain split Clamp
16 mm split Clamp (threaded)
14,2-15 mm plain split Clamp
(SCR) for solid copper rod
20 mm plain split Clamp
(SCR) for solid copper rod
710450
10
10
0,090
0,340
Reference
Part No.
code
• • • Copper
BEP25x5x300MM 545140
10
0,330
BEP25x5x200MM 545135
10
0,300
BEP25x5x150MM 545530
Dimensions &
No. of holes
Designed to
suit Earth Pit
25x5x300 mm
12 holes
25x5x200 mm
8 holes
25x5x150 mm
6 holes
Concrete Earth Pit
IP-900-C(103450)
Plastic Earth Pit
PIT03(710180)
Cast Iron Earth Pit
IPR193(103470)
IP180(103480)
GROUND ENHANCEMENT MATERIAL GEM
Unit
weight kg
1
0,300
1
0,260
1
0,150
TAPE METAL SUPPORT FOR FOUNDATIONS OR
TRENCHES AND TAPE METAL WALL SUPPORT
Refer to page 11 for
further information
Reference code
Part No.
GEM
163670
1
Unit
weight kg
11,500
107600
107550
TAPE METAL SUPPORT FOR FOUNDATIONS OR
TRENCHES
PREFABRICATED CROWSFOOT
•
Keeps the tape in a vertical position
Reference code
Part No.
Rod height
mm
Unit
weight kg
• • • Galvanized steel
STBF-25-GS
STBF-40-GS
Reference code
Part No.
GF-302
503900
Rod
ø in mm
Tinned copper
30 x 2
1
Unit
weight kg
5,500
250
400
25
25
TAPE METAL WALL SUPPORT
Reference code
Part No.
0,200
0,340
Unit
weight kg
Material
• • • For tape below 6 mm thick
SSF-6-GS
SSF-6-C
www.erico.com
107600
107610
37
107550
107560
Galvanized steel
Copper
25
25
0,130
0,140
GROUNDING & BONDING
RCC16
RCC10
SRC15
SRC20
ERITECH® GROUNDING & BONDING
TOWER EARTH CLAMP
PIPE COLLARS
Meets BS1432 C101/BS970
M10x30
12
ø 6-11 mm
40
22
Reference code
Part No.
Unit
weight kg
ø min. / max.
• • • Stainless steel - conductor, 6 to 11 mm
Reference code
SPC-5080-S
107000
SPC-70120-S
107010
SPC-130180-S
107020
• • • Copper - conductor, 6 to 11 mm
SPC-5080-C
107050
SPC-70120-C
107060
SPC-130180-C
107070
Unit
weight kg
Part No.
• • • Copper - ø 8mm
TECLP-8-CU
710050
10
0,090
710060
10
0,058
• • • Aluminium - ø 8mm
TECLP-8-AL
B - BOND
50/80
70/120
130/180
10
10
10
0,147
0,170
0,214
50/80
70/120
130/180
10
10
10
0,165
0,191
0,240
FASTENERS FOR GUTTER RIM
Meets NFC 17100/NFC 17102
Meets BS1471/BS2874
M10x35
33
33
25 mm max.
Reference code
Reference code
• • • Copper - conductor, 6 to 10 mm
Unit
weight kg
Part No.
SGR-610-2
• • • Copper - suit 26 mm max tape width
BBBC
710260
25
0,12
GROUNDING & BONDING
710250
25
0,60
107230
M10
0,067
25
100
Unit
weight kg
0,102
0,008
VFST
40
WATER PIPE BOND
33
10
INSULATORS
• • • Aluminium - suit 26 mm max tape width
ABBC
Unit
weight kg
Part No.
Meets BS1400
33
ISO
Reference code
Part No.
ISO40M10
VFST10x40
551520
593480
EQUIPOTENTIAL BARS
Reference code
Unit
weight kg
Part No.
BWPB
• • • Aluminium
AWPB
710310
20
0,12
710270
20
0,08
160mm
SEB
• • • Copper
40mm
ø
5mm
l
171mm
Cu 50x5mm
w
173mm
WATERMAIN PIPE BOND
52mm
DLUNI
Meets BS1400/BS1471
SEB-62-DL
Reference
code
DLUNI
SEB-06
SEB-06-DL
SEB-10
SEB-10-DL
SEB-62-DL
SEB-GER-08
25 mm max.
Reference code
Part No.
Unit
weight kg
ø mm
• • • Copper
WPB010
710320
Meets
BS1433/BS2874
UL 94
NFF 1611 F2
5
0,26
SEB-GER-08
SEB-06-DL
Nr of Disconnect L
Part No. terminals
links
mm
545000
1
125
545010
6
0
400
545020
6
1
475
545030
10
0
600
545040
10
1
675
545130
6
2
550
545001 7 x 25 mm2
1 x tape 30 x 3,5
1 x 8 mm ø
W
L
100
100
100
100
100
100
94
94
94
94
94
94
1
1
1
1
1
1
10
Unit
weight kg
1,192
1,642
2,400
2,312
2,800
3,200
0,314
NB: terminals do include Nuts and Bolts
38
www.erico.com
ERITECH® GROUNDING & BONDING
EQUIPOTENTIAL PLATE SET
EARTH BOSS
Meets UL 94/NFF 1611 F2
100 mm
710160
L. 200 mm
25 mm
10,5 mm
• 16 connection points
Reference code
Unit
weight kg
Part No.
• • • Tinned copper 100 x 5
SEP
545190
1
1,02
EARTH BLOCKS
500-10-E-BOSS
710160
Length
mm
50
ø
mm
50
1
Unit
weight kg
-
198400
198410
198420
5 ft = 1.5 m
10 ft = 3 m
20 ft = 6 m
STATIC EARTHING
13 mm
50 mm
165620
165410
EBL08
- 6 x ø 5,2 mm
- 2 x ø 6,5 mm
20 mm
88 mm
Part No.
EBL04
- 3 x ø 5,2 mm
- 1 x ø 6,5 mm
EBL04
20 mm
Reference code
13 mm
EBL08
B2610A
Unit
weight kg
Part No.
• • • Tinned brass
EBL04
EBL08
711460
711470
10
10
B2671A
165400
710330
0,090
0,158
DOUBLE CONNECTING PLATE
Supporting plate for the connection of round
conductors, diameter 10 mm, or flat conductors
up to 40 x 4 mm on rebars up to 24 mm ø.
10100
80
60
40
M10
Reference code
Part No.
Conductor
Unit
weight kg
Rebar
Reference code
Part No.
B2610A
B2671A
A822SA111C-5
A822SA111C-10
A822SA111C-20
B2618B
SEB001
165410
165620
198400
198410
198420
165400
710330
• • • Galvanized steel
CPD-2440
101100 10 mm dia or 40x4 24 mm dia
25
0,340
REBAR CLAMPS
RC
EK
Reference code
Part No.
Conductor
Rebar
8 mm dia
8 mm dia
25 mm2
25 mm2
8-18 mm
18-38 mm
25 mm-parallel
25 mm-perpendicular
Unit
weight kg
• • • Galvanized steel
RC70
RC100
EK16
EK17
710325
710335
710355
710365
www.erico.com
1
1
50
50
SEB001
B2618B
0,340
0,780
0,091
0,091
39
Description
Spring Clamp
Aircraft Grounding Clamp
Orange Coiled Cable, 5 ft (1.5 m)
Orange Coiled Cable, 10 ft (3 m)
Orange Coiled Cable, 20 ft (6 m)
Cable Reel Assembly
Static Earth Bar
1
1
1
1
1
1
1
Unit
weight kg
0,144
1,140
0,450
0,540
0,820
3,150
0,260
GROUNDING & BONDING
Reference code
ERITECH® GROUNDING & BONDING
EYES BOLTS FOR COPPERBONDED
GROUND RODS
OXIDE INHIBITING COMPOUND
Reference code
W
Part No.
OXINHIBCOMP
710220
1
Unit
weight kg
0,314
H
ERITECH COPPER BONDING STRAPS
Reference code
Part No.
ø inch
W
H
EBR-58
EBR-34
710140
710150
5/8”
3/4”
68
68
96
96
5
5
Unit
weight kg
Part
No.
GROUNDING RECEPTACLES
165180
Meets BS1400
165220
165230
C
A
B
These receptacles provide earth connections for the frames of planes, ships, tankers trucks, etc.
eliminating their electrostatic charge and obtaining equipotentiality with the surrounding earth.
GROUNDING & BONDING
Parts are copper alloy, connections to the earth circuit can be made with CADWELD®.
Reference
code
B165
B166
B167
Part No.
165180
165220
165230
Attachment Depth
A
Cast 3/4” ball 4 1/2”
Cast 3/4” rod 6 1/4”
Cast 1-1/2” rod 7 1/4”
øB
øC
2 3/4”
4 3/4” 3 7/8”
6 1/2” 4 3/4”
1
1
1
Unit
weight kg
0,800
2,100
7,000
DENSO TAPE (DT) AND SILFOS TAPE (SFO)
Reference code
DT50
SFO50
Part No.
711520
710170
10 m x 50 mm
8 m x 50 mm
1
1
Unit
weight kg
0,760
0,430
POTENTIAL EQUALIZATION CLAMP (PEC)
Reference code
PEC100
Part No.
702900
1
563540
556620
563550
556630
563300
556640
556650
563320
556660
556940
556670
556680
563340
556690
563430
556700
556710
556950
556720
556730
556740
556750
556760
556960
556770
556780
556790
556800
565000
556810
556970
556820
556830
563350
556840
563440
563360
563370
556850
556860
563390
563400
556980
563560
Thick. Section L
Reference code Intensity
A
mm mm2 mm
Ø
mm
J
mm
T
mm
MBJ 16-100-6
MBJ 16-100-8
MBJ 16-150-6
MBJ 16-150-8
MBJ 16-200-6
MBJ 16-200-8
MBJ 16-250-8
MBJ 16-300-6
MBJ 16-300-8
MBJ 16-500-8
MBJ 25-100-10
MBJ 25-150-10
MBJ 25-200-6
MBJ 25-200-10
MBJ 25-200-12
MBJ 25-250-10
MBJ 25-300-10
MBJ 25-500-10
MBJ 30-100-10
MBJ 30-150-10
MBJ 30-200-10
MBJ 30-250-10
MBJ 30-300-10
MBJ 30-500-10
MBJ 35-100-10
MBJ 35-150-10
MBJ 35-200-10
MBJ 35-250-10
MBJ 35-250-25
MBJ 35-300-10
MBJ 35-500-10
MBJ 50-100-10
MBJ 50-150-10
MBJ 50-200-6
MBJ 50-200-10
MBJ 50-200-12
MBJ 50-200-16
MBJ 50-200-18
MBJ 50-250-10
MBJ 50-300-10
MBJ 50-300-16
MBJ 50-300-18
MBJ 50-500-10
MBJ 50-500-12
6,5
8,5
6,5
8,5
6,5
8,5
8,5
6,5
8,5
8,5
10,5
10,5
6,5
10,5
12,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
25,5
10,5
10,5
10,5
10,5
6,5
10,5
12,5
16,5
18,5
10,5
10,5
16,5
18,5
10,5
12,5
15
15
15
15
15
15
15
15
15
15
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
40
23
23
28
28
28
28
28
28
28
28
28
28
28
28
28
25
25
25
25
25
25
25
25
25
25
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
50
33
33
38
38
38
38
38
38
38
38
38
38
38
38
38
120
120
120
120
120
120
120
120
120
120
150
150
150
150
150
150
150
150
180
180
180
180
180
180
197
197
197
197
197
197
197
250
250
250
250
250
250
250
250
250
250
250
250
250
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
2
2
2
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
16
16
16
16
16
16
16
16
16
16
25
25
25
25
25
25
25
25
30
30
30
30
30
30
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
150
150
200
200
250
300
300
500
100
150
200
200
200
250
300
500
100
150
200
250
300
500
100
150
200
250
250
300
500
100
150
200
200
200
200
200
250
300
300
300
500
500
Unit
weight kg
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0,018
0,018
0,035
0,035
0,033
0,033
0,040
0,05
0,05
0,082
0,027
0,039
0,052
0,052
0,052
0,064
0,077
0,013
0,032
0,047
0,062
0,075
0,092
0,155
0,037
0,054
0,072
0,089
0,089
0,110
0,180
0,052
0,077
0,12
0,120
0,120
0,11
0,11
0,127
0,153
0,15
0,14
0,255
0,255
Unit
weight kg
0,500
40
www.erico.com
ERITECH® GROUNDING & BONDING
ERITECH® EARTH POINTS
TYPE DB
• FIG. 1: CADWELD® mould ref. 197130 can be used to make CADWELD welded
connection of 1 or 2 conductors (cross-section up to 50 mm2 to the plate).
• FIG. 2: Steel bar attached at right angles to shank of earth plate by
CADWELD welding.
3
1
4
• FIG. 3: Steel bar attached to end of earth plate by CADWELD welding.
• FIG. 4: 50 mm2 green: yellow insulated conductor attached to end of earth plate by
CADWELD welding.
2
TYPE B161 - B164
TYPE B162
7
6
9
5
11
10
12
8
Fig. No.
1
2
3
4
Reference code
Part No.
øA
DB-8A
DB-10A
DB-12A
DB-16A
DB-8K
DB-10K
DB-12K
DB-16K
DB-8KS
DB-10KS
DB-12KS
DB-16KS
DB-10-C5005
DB-10-C501
DB-10-C502
166090
166120
166150
166180
166100
166130
166160
166190
166110
166140
166170
166200
166480
166490
166500
M8
M10
M12
M16
M8
M10
M12
M16
M8
M10
M12
M16
M10
M10
M10
TYPE B161-B164
5
6
7
8
Reference code
Part No.
B161-8A
B161-10B
B164-12A
B161-8K
B161-10KA
B164-12K
B161-8KS
B161-10KM
B164-12KS
B161-10-C5005
B161-10-C501
B161-10-C502
166000
166030
166060
166010
166040
166070
166020
166050
166080
166510
166520
166530
øA
4xM8
4xM10
4xM12
4xM8
4xM10
4xM12
4xM8
4xM10
4xM12
4xM10
4xM10
4xM10
TYPE B162
9
10
11
12
Reference code
Part No.
øA
B-162-12A
B-162-12K
B-162-12KS
B-162-12-C5005
B-162-12-C501
B-162-12-C502
166210
166220
162230
166540
166550
166560
2xM12
2xM12
2xM12
2xM12
2xM12
2xM12
www.erico.com
øB
øC
øD
F
L
mm
mm
mm
mm
mm
12,7
16
16
16
12,7
16
16
16
12,7
16
16
16
-
12
19
19
19
12
19
19
19
50mm2
50mm2
50mm2
30
50
50
50
30
50
50
50
30
50
50
50
50
50
50
50
55
55
55
50
55
55
55
50
55
55
55
55
55
55
500
500
500
500
500
500
500
500
500
1000
2000
øB
øC
øD
F
G
L
mm
mm
mm
mm
mm
mm
14
14
10,7
14
14
10,7
14
14
10,7
-
12
12
12
12
12
12
50mm2
50mm2
50mm2
65
65
85
65
65
85
65
65
85
65
65
65
42
42
75
42
42
75
42
42
75
-
30
30
44,5
30
30
44,5
30
30
44,5
30
30
30
500
500
400
500
500
400
500
1000
2000
øB
øC
D
E
F
G
L
mm
mm
mm
mm
mm
mm
mm
10,7
10,7
10,7
-
12
12
50mm2
50mm2
50mm2
45
45
45
45
45
45
85
85
85
85
85
85
75
75
75
75
75
75
44,5
44,5
44,5
44,5
44,5
44,5
400
400
500
1000
2000
41
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
0,090
0,300
0,305
0,400
0,450
1,520
1,535
1,560
0,440
1,520
1,505
1,540
0,740
0,960
1,440
1
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
0,435
0,455
0,770
1,980
1,040
1,080
1,980
0,850
1,100
0,840
1,100
1,600
5
1
1
1
1
1
Unit
weight kg
0,400
0,700
0,700
0,820
1,060
1,560
GROUNDING & BONDING
TYPE DB
CRITEC® SURGE PROTECTION
PAGE 44
PAGE 44
PAGE 44
SURGE PROTECTION
PAGE 44
PAGE 44
COLOUR CODE
Power Protection device
Telecommunication and Dataline
Protection device.
PAGE 43
Power line
Telecoms and Data
Earthing network
42
www.erico.com
CRITEC® SURGE PROTECTION
DINLINE DECOUPLING INDUCTORS (DDI)
DINLINE SURGE DIVERTERS 150kA
Reference
code
DSD1150 2SR 275
Part No.
Description
702420
150kA, 275V
1
Part No.
Description
702460
702466
702478
702480
702510
702436
702491
702521
702496
702530
702506
702560
702566
60kA, 275V, Relay
60kA, 275V Module
40kA, 75V
40kA, 150V
40kA, 150V, Relay
40kA, 150V Module
40kA, 275V
40kA, 275V, Relay
40kA, 275V Module
40kA, 440V, Relay
40kA, 440V Module
10kA, 275V
10kA, 275V Module
Unit
weight kg
0.12
0.10
0.12
0.12
0.12
0.10
0.12
0.12
0.10
0.12
0.10
0.12
0.10
1
1
1
1
1
1
1
1
1
1
1
1
1
Part No.
Description
700465
700475
35A
63A
1
1
Unit
weight kg
0.5
1.0
1
Unit
weight kg
0.2
DINLINE SURGE COUNTER
DINLINE SURGE DIVERTERS 100-10kA
Reference
code
DSD160 1SR 275
DSD160 M 275
DSD140 1S 75
DSD140 1S 150
DSD140 1SR 150
DSD140 M 150
DSD140 1S 275
DSD140 1SR 275
DSD140 M 275
DSD140 1SR 440
DSD140 M 440
DSD110 1S 275
DSD110 M 275
Reference
code
DDI35
DDI63
Unit
weight kg
0.33
Reference
code
TDS SC
Part No.
Description
701250
TRANSIENT DISCRIMINATING FILTER (TDF)
Reference
code
TDF3A120V
TDF3A240V
TDF10A120V
TDF10A240V
TDF20A120V
TDF20A240V
DINLINE SURGE DIVERTERS THREE PHASE
Part No.
Description
700001
700002
700003
700004
700005
700006
3A, 120V
3A, 240V
10A, 120V
10A, 240V
20A, 120V
20A, 240V
1
1
1
1
1
1
Unit
weight kg
0.35
0.35
0.75
0.75
0.8
0.8
1
1
1
Unit
weight kg
0,200
0,200
0,200
Reference
code
DSD340 TNC 275 A
DSD340 TNS 275 A
DSD340 TT 275 A
Part No.
702581
702591
702601
Description
40kA, 275V TN-C, Modular
40kA, 275V TN-S, Modular
40kA, 275V TT, Modular
1
1
1
Unit
weight kg
0.4
0.4
0.4
Reference
code
DSF6A 30V
DSF6A 150V
DSF6A 275V
DINLINE SPARK GAP DIVERTER (SGD)
Part No.
Description
702090
701000
701030
6A, 30V
6A, 150V
6A, 275V
REMOTE TRANSMITTER PROTECTOR (RTP)
Reference
code
SGD1100 2S NE
SGD112 1S NE
www.erico.com
Part No.
Description
702400
702402
100kA 10/350
12kA 10/350
1
1
Unit
weight kg
0.3
0.12
Reference
code
RTP 30 34
43
Part No.
Description
700865
30V, 145mA 3/4” NPT SS pipe
1
Unit
weight kg
0,340
SURGE PROTECTION
DINLINE SURGE FILTER (DSF)
CRITEC® SURGE PROTECTION
TELECOMMUNICATION PROTECTORS (SLP/DLP/DLT)
UNIVERSAL TRANSIENT BARRIER (UTB)
Reference
code
UTB5
UTB15
UTB15EX
UTB30
UTB30EX
UTB60
UTB110
UTBSA
Part No.
Description
702800
702810
702811
702820
702821
702830
702840
702860
5V, 1.5A
15V, 1.5A
15V, EX approved
30V, 1.5A
30V, EX approved
60V, 1.5A
110Vac, 1.5A
Analog Telephone
Unit
weight kg
0,100
0,100
0,100
0,100
0,100
0,100
0,100
0,100
1
1
1
1
1
1
1
1
Reference
code
SLP10K1F
HSP10K12
HSP10K36
HSP10K72
HSP10K230
DLT
Part No.
Description
701540
700815
700805
700850
700860
702721
12V, high speed
36V, high speed
72V, high speed
230V, high speed
2.5mm2 terminal block
Unit
weight kg
0,100
0,100
0,100
0,100
0,100
0,150
1
1
1
1
1
1
COAXIAL PROTECTORS - TV AND VIDEO
DATA EQUIPMENT PROTECTORS (DEP)
Reference
code
DEP RS232 25 25
DEP RS232 9 9
DEP RS422 9 9
Part No.
Description
700630
700640
700650
25 wire, 15V
9 wire, 15V
9 wire, 9V
1
1
1
Reference
code
CATV F
CATV MF
CCTV 12
Unit
weight kg
0,050
0,050
0,050
Part No.
Description
702535
702525
703000
Cable TV Protector
Antenna TV Protector
CCTV protector (video)
Unit
weight kg
0,100
0,100
0,200
1
1
1
COAXIAL SURGE PROTECTORS (CSP)
DINLINE DC PROTECTORS
SURGE PROTECTION
702750
Reference
code
DSD120 1S 12
DSD120 1S 24
DSD140 2BR 24/48
Part No.
Description
702670
702680
702750
12V, 10kA
24V, 10kA
24-48V, 40kA
1
1
1
Reference
code
CSP BNC 90
CSP BNC 600
CSP NMF 90
CSP NMF 600
CSP NB 90
CSP NB 600
Unit
weight kg
0,100
0,100
0,150
LOCAL AREA NETWORK PROTECTORS (LAN)
Reference
code
LAN RJ45 1
LAN RJ45 24
Part No.
Description
700526
700527
1 x RJ45 circuit
24 x RJ45 circuits
1
1
Unit
weight kg
0,100
Description
700360
700405
700310
700355
700410
700455
BNC, 90V
BNC, 600V
NMF, 90V
NMF, 600V
NB, 90V
NB, 600V
1
1
1
1
1
1
Unit
weight kg
0,200
0,200
0,200
0,200
0,200
0,200
LOADCELL PROTECTORS (LCP)
Reference
code
LCO01A
44
Part No.
Part No.
701610
1
Unit
weight kg
0,274
www.erico.com
CADWELD® / CADWELD® PLUS / CADWELD® MULTI
XA
PC
BY
LE
PG
PA
THE CADWELD® MOULD NUMBERING SYSTEM
BD
TA
XXX-XXXX
Mould type
Mould Price Key
EXAMPLES :
www.erico.com
Code for Main or Run Conductor
Code for Tap Conductor
TA C - Y6 Y4
GT C - P143 Y6
SS C - Y4
VS C - Y2 - V76
•
•
•
•
• Type GT
• Price Key C
• 14,2 mm Copper Clad
Ground Rod
• 120 mm2 Tap
• Type SS
• Price Key C
• 2 x 70 mm2 cables
•
•
•
•
•
Type TA
Price Key C
120 mm2 Run
70 mm2 Tap
45
Type VS
Price Key C
Cable 35 mm2
Vertical Pipe
76 mm Diameter Pipe
CADWELD
The CADWELD Mould Part Number code gives the complete
information of the mould ie:
- type of connection, mould price key, and conductor size(s).
®
CADWELD PLUS
CADWELD PLUS
connections offer all the
benefits of conventional
CADWELD® connections:
®
W
NE
• Withstand repeated fault currents
without failing during operation
• Exceed requirements of “IEEE® Std
837- Std. for Qualifying Permanent
Connections Used In Substation
Grounding”
• Join copper to copper, copper to
galvanized or plain steel, copper to
copper clad steel, copper to bronze/
brass/stainless steel, steel to steel, etc.
• Current carrying capacity equal to or
greater than that of the conductor
• Permanent, molecular bond that
will not loosen or corrode, resulting in a
connection with a lifetime equal to that of
the installation
The ultimate welded connection that will never
loosen, corrode or increase in resistance just got
BETTER.
CADWELD PLUS is the latest advancement in the continuing evolution of ERICO’s
exothermic products. Since it’s development in 1938, CADWELD electrical
connections have become recognized as the ultimate connection for rail, cathodic,
power and grounding applications. ERICO® has established itself as the worldwide
connections leader. CADWELD PLUS continues this tradition of technical leadership.
The revolutionary CADWELD PLUS System is a simplified method of performing
exothermically welded electrical connections. The CADWELD PLUS integrated welding
material package has streamlined the installation process by eliminating ignition
materials – reducing set up time.
The tamper proof, integrated welding material package consists of a steel cup
containing CADWELD patented welding material alloys and ignition source. This new
welding material package is designed for use in all standard CADWELD moulds including CADWELD® MULTI. Once placed in the CADWELD mould, the welding material is
electronically ignited using a simple battery-powered control unit with six (6) foot lead.
• No external power or heat source required
• Quality Assurance Inspection is
easy and visual
• Minimal installation training required
Polymeric
Cover
CADWELD PLUS
Package
• Consists of a tamper proof, disposable,
moisture-resistant welding material cup. The
welding material, disk and ignition source
are incorporated into the self-contained package
• Virtually unlimited shelf life
Ignitor Strip
Graphite
Mould
Tap Hole
Conductor
• Completes welds at distances of up to 6
ft/1.8 meters (up to 15 ft/4.6 meters with
optional lead)
Weld Cavity
• Requires minimum components – no
starting material, no disks, no flint igniters
• Easy to handle, store and transport
– by air, land or sea in unlimited quantities
CADWELD® PLUS
• Reduces installation time by 20%
• Has colour-coded welding material
containers – by size and alloy type – for easy
identification
CADWELD
• Has electronic ignition with a CE/UL®
battery powered controller box that is
designed for 600 connections with one set
of 8 standard AA batteries (included) –
requiring no special batteries or chargers
• Designed for use in standard CADWELD®
moulds including CADWELD® MULTI
Feature
Benefits
Integrated Welding
Material Package
• Simplifies training and set up
• Saves labour
• Simplifies cleaning
Colour Coded
Welding Material
• Reduces risk of misapplication
• Simple visual verification of
correct welding material size
Electronic Control Unit
• No starting material required
• Easy ignition
Six Foot Control Unit Lead
• Increased flexibility in hard to
reach areas
46
www.erico.com
®
CADWELD PLUS
Installation Is Easy!
W
NE
4 Simple Steps For Permanently Welded Electrical Connections
2
1
Insert CADWELD® PLUS
package into mould
Attach control unit
termination clip to
ignition strip
CADWELD PLUS for Grounding Applications
CADWELD PLUS
Reference Code
Part No.
Size Identification
Ring Color
Traditional Welding
Material Part Number
(Clear Cap)
15PLUSF20
25PLUSF20
32PLUSF20
45PLUSF20
65PLUSF20
90PLUSF20
115PLUSF20
150PLUSF20
200PLUSF20
250PLUSF20
300PLUSF20
400PLUSF20
500PLUSF20
165700
Black
Red
White
Light Blue
Dark Green
Gray
Orange
Dark Blue
Yellow
Purple
Light Green
Brown
Light Brown
15
25
32
45
65
90
115
150
200
250
use 2 x 150
use 2 x 200
500
165701
165702
165703
165704
165705
165706
165707
165708
165709
165710
165711
165712
3
4
Press and hold control unit
switch and wait for the
ignition
Open the mould and
remove the expended steel
cup – no special disposal
required
CADWELD PLUS for Cathodic Applications
CADWELD PLUS
Reference Code
Part No.
Size Identification
Ring Color
Traditional Welding
Material Part Number
(Green Cap)
CA15PLUSF33
CA25PLUSF33
CA32PLUSF33
CA45PLUSF33
CA65PLUSF33
165713
165714
165715
165716
165717
Black
Red
White
Light Blue
Dark Green
CA15/CA15S
CA25
CA32
CA45
CA65
CADWELD PLUS
Reference Code
Part No.
Size Identification
Ring Color
Traditional Welding
Material Part Number
(Orange Cap)
CA25PLUSXF19
CA32PLUSXF19
CA45PLUSXF19
CA65PLUSXF19
165722
165723
165724
165725
Red
White
Light Blue
Dark Green
CA25XF19
CA32XF19
CA45XF19
CA65XF19
CADWELD PLUS for Cast Iron Applications
Part No.
25PLUSXF19
32PLUSXF19
45PLUSXF19
65PLUSXF19
165718
165719
165720
165721
Traditional Welding
Size Identification Material Part Number
(Orange Cap)
Ring Color
Red
White
Light Blue
Dark Green
Gram weight PLUS welding material type i.e. 45PLUSF20
25XF19
32XF19
45XF19
65XF19
Accessories
Reference Code Part No.
PLUSCU
Baffle Cover Kit
CADWELD PLUS Patent Numbers
PLUSCULD
6,553,911 6,835,910 6,703,578
CADWELD PLUS Control Unit initiates the reaction of
the metal crucible. The standard unit includes a 6-foot (1.8
meter) high temperature control unit lead. The lead attaches to
the ignition strip using a custom made,
purpose-designed termination clip.
www.erico.com
PLUSCU
PLUSCU15L
PLUSCULD
PLUSCULD15
MC2X2KIT
MC25X3KIT
MC3X3KIT
MC4X4KIT
165738
165745
165739
165746
165740
165744
165741
165742
Description
CADWELD PLUS Control Unit
CADWELD PLUS Control Unit with 15 ft. (4.6 meters) Lead
CONTROL UNIT Replacement Lead 6 ft. (1.8 meters)
CONTROL UNIT Replacement Lead 15 ft. (4.6 meters)
Kit, Baffle Cover, Graphite - 2” X 2” Mould
Kit, Baffle Cover, Graphite - 21⁄2” X 3” Mould
Kit, Baffle Cover, Graphite - 3” X 3” Mould
Kit, Baffle Cover, Graphite - 4” X 4” Mould
After the termination clip is installed on the ignition strip, the
installer pushes and holds the ignition button to start a charging
and discharging sequence. Within a few seconds the control
unit sends a predetermined voltage to the ignition strip and the
reaction is initiated.
47
CADWELD
CADWELD PLUS
Reference Code
®
®
CADWELD AND CADWELD PLUS
Traditional CADWELD® & CADWELD® PLUS Welding Material
W
NE
Welding
Material
Size
Traditional CADWELD
Reference
code
Part No.
CADWELD PLUS
Unit
Weight kg
Disk
Type*
Reference
code
Part No.
Unit
Weight kg
15PLUSF20
25PLUSF20
32PLUSF20
45PLUSF20
65PLUSF20
90PLUSF20
115PLUSF20
150PLUSF20
200PLUSF20
250PLUSF20
300PLUSF20
400PLUSF20
500PLUSF20
165700
165701
165702
165703
165704
165705
165706
165707
165708
165709
165710
165711
165712
20
20
20
20
20
10
10
10
10
10
10
10
10
0,049
0,063
0,065
0,086
0,104
0,158
0,185
0,217
0,267
0,353
0,376
0,480
0,585
F20 Alloy - Clear Cap - Copper/Copper - Copper/Steel - Steel/Steel
15
25
32
45
65
90
115
150
200
250
300
400
500
15
25
32
45
65
90
115
150
200
250
use (2) 150
use (2) 200
500
163590
163000
163010
163020
163030
163040
163050
163060
163070
163080
20
20
20
20
20
10
10
10
10
10
0,015
0,025
0,032
0,045
0,065
0,090
0,115
0,150
0,200
0,250
19
19
19
19
19
25
25
38
38
38
163090
10
0,500
38
20
20
20
20
20
10
10
10
0,015
0,025
0,032
0,045
0,065
0,090
0,115
0,150
19
19
19
19
19
25
25
38
CA15PLUSF33
CA25PLUSF33
CA32PLUSF33
CA45PLUSF33
CA65PLUSF33
165713
165714
165715
165716
165717
20
20
20
20
20
0,049
0,063
0,065
0,086
0,104
20
20
20
20
10
10
0,025
0,032
0,045
0,065
0,090
0,115
19
19
19
19
25
25
25PLUSXF19
32PLUSXF19
45PLUSXF19
65PLUSXF19
165718
165719
165720
165721
20
20
20
20
0,063
0,065
0,086
0,104
CA25PLUSXF19
CA32PLUSXF19
CA45PLUSXF19
CA65PLUSXF19
165722
165722
165722
165722
20
20
20
20
0,063
0,065
0,086
0,104
F33 Alloy - Green Cap - Cathodic protection - Steel pipe
15
25
32
45
65
90
115
150
CA15
CA25
CA32
CA45
CA65
CA90
CA115
CA150
163200
163210
163220
163230
163240
163250
163260
163270
XF19 Alloy - Orange Cap - Cast Iron application
25
32
45
65
90
115
25XF19
32XF19
45XF19
65XF19
90XF19
115XF19
163280
163290
163300
163310
163320
163330
CADWELD
XF19 Alloy - Orange Cap - Cathodic protection - Cast Iron pipe
*Disk Type:
Welding Material
Disk Type
size
(Diameter - mm)
Welding material disks are supplied with “Traditional CADWELD”
15-65
19
welding material. However, spare disks can be ordered as follows:
90-115
150-500
48
25
38
Reference Code
Part No.
DISC PACK21/19
DISC PACK11/25
DISC PACK11/38
141154
141156
141157
www.erico.com
®
CADWELD MULTI
CADWELD® MULTI Connection Capabilities
Copper Cable/Solid to Copper Cable/Solid
steps for multiple, permanently
welded, electrical connections
4 Easy
Unit
batting and variable
Step
Step Layer
conductor sizes to be
2
1 welded into dry mold
• Copper cable/solid sizes up to 1/0 (50 mm2) stranded or .40” (10 mm) diameter
Close mold and drop
metal disk in place
• Copper cable/solid sizes up to #3 (25 mm2) stranded or .26” (6,5 mm) diameter
Copper Cable/Solid/Strip to Rebar
welding material
Step Deposit
and tap bottom of
3 container to release
• Copper conductor sizes up to 1/0 (50 mm2) stranded or .40” (10 mm) diameter
• Copper or steel strip/lug sizes up to 1” x .138” (30 x 3,5 mm)
• Rebar sizes up to #3 (10 mm)
the cover and ignite
Step Close
with flint ignitor. Open
4 the mold after 10 seconds
starting material
Copper Cable/Solid to Copper or Steel Strip/Lug
• Copper conductor sizes up to 1/0 (50 mm2) stranded or .40” (10 mm) diameter
• Copper or steel strip/lug sizes up to 1” x .138” (30 x 3,5 mm)
Copper Strip to Copper Strip
The CADWELD MULTI
combines a versatile mold
block and a range of
gaskets (batting) to allow
numerous different welded connections to
be produced without the need to change the
mold for each connection type.
The process is similar to the traditional CADWELD with one
distinct difference... there is no need to change the mold
for different connection types.
The whole process is complete in about one minute. The connection table details the gasket quantities required for each weld.
Galvanized Steel Strip
to Galvanized Steel Strip
• Galvanized steel strip sizes up to 1” x .138” (30 x 3,5 mm)
* in KITCDM01 = Traditional CADWELD MULTI Kit
** in KITCDM01PLUS = CADWELD PLUS MULTI Kit
www.erico.com
CADWELD MULTI Available Items
Description
Reference Code
Part No.
Kit for 20 welds, in metallic box
KITCDM01
167780
14” x 13” x 6” (360 x 330 x 160 mm)
Kit for 20 welds using CADWELD PLUS,
KITCDM01
167781
in metallic box (Control Unit sold separately)
PLUS
14” x 13” x 11” (360 x 330 x 280 mm)
Made from the following items which can be ordered separately:
Mould
Handle Clamp
Set of 33 battings/gaskets
Welding material 90*
CADWELD PLUS Welding Material**
Toolset TS-6A, including:
• gloves
• cardcloth brush
• soft brush • flint ignitor
49
CDM01
FMCDM01
SCDM01
90
90PLUSF20
TS6A
234720
120882
120886
163040
165705
169930
1
Unit
Weight (kg)
10.00
1
11.50
1
1
1
10
10
1
1.000
1.100
0.200
0.090
0.158
0.490
Qty. in Kit
1
1
2
2 boxes of 10
2 boxes of 10
1
CADWELD
• BB and CG 1” x (.020” - .118”), (30 x 3,5 mm)
• BG and EB 1” x (.020” - .079”), (30 x 3 mm)
CADWELD
Mould
A
B
SS
A
B
TA
A
B
XA
A
B
PG
A
B
PT
PC
LJ
LW
A
HA
A
LE
VG
VS
A
CADWELD
Reference
code
SSC-W6
SSC-W8
SSC-Y1
SSC-Y2
SSC-Y3
SSC-Y4
SSC-Y5
SSC-Y6
TAC-Y1
TAC-Y2
TAC-Y2-Y1
TAC-Y3
TAC-Y4
TAC-Y4-Y2
TAC-Y5
TAC-Y5-Y6
TAC-Y6
TAC-Y6-Y4
TAC-Y7
TAC-Y8
XAC-Y1
XAC-Y2
XAC-Y3
XAC-Y4
XAC-Y5
XAC-Y6
PGC-Y1
PGC-Y2
PGC-Y3
PGC-Y4
PGC-Y4-Y1
PGC-Y5
PGC-Y6
PTC-Y1
PTC-Y2
PTC-Y3
PTC-Y4
PTC-Y5
PTC-Y6
PCC-Y1
PCC-Y3
PCC-Y6
LJP-Y1-BAK
LJP-Y2-BAK
LJP-Y3-BAK
LJC-Y3-FAM
LWP-Y3-BAK
HAA-Y1
HAA-Y1-CA
HAA-Y2
HAA-A3
HAA-Y3
HAA-Y4
HAA-B3-CA
HBA-B3
LEP-Y3-BAK
Part No.
221008
221011
221004
221006
221009
221021
221013
221014
221025
221028
221063
222459
221035
221075
222461
225026
222463
221094
221051
221053
221135
221138
221142
221148
221153
221159
237901
232556
232648
231342
236084
223943
231692
221268
226545
221265
221258
221256
222115
223550
222560
230199
234737
234738
234739
232933
234782
221609
221466
221607
222689
221603
221534
240228
223044
234759
Diameter
Amm
Bmm
8,0
8,0
10,0
10,0
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
12,5
12,5
14,2
14,2
6,4
6,4
7,6
7,6
7,6
6,4
9,0
9,0
11,0
11,0
11,0
7,6
12,5
12,5
12,5
14,2
14,2
14,2
14,2
11,0
15,9
15,9
17,7
17,7
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
12,5
12,5
14,2
14,2
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
11,0
6,4
12,5
12,5
14,2
14,2
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
12,5
12,5
14,2
14,2
6,4
6,4
9,0
9,0
14,2
14,2
6,4
7,6
9,0
9,0
9,0
6,4
6,4
7,6
8,0
9,0
11,0
4,9
4,9
9,0
Section
Bmm2
Amm2
50
50
78,5
78,5
25
25
35
35
50
50
70
70
95
95
120
120
25
25
35
35
35
25
50
50
70
70
70
35
95
95
95
120
120
120
120
70
150
150
185
185
25
25
35
35
50
50
70
70
95
95
120
120
25
25
35
35
50
50
70
70
70
25
95
95
120
120
25
25
35
35
50
50
70
70
95
95
120
120
25
25
50
50
120
120
25
60
35
60
50
60
50
250
50
60
25
25
35
40
50
70
14,5-16
14,5-16
50
60
Sizes
mm
30x2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
1,37
1,37
1,37
1,37
1,37
1,37
1,75
1,75
1,37
1,37
1,37
1,37
1,37
1,37
1,37
1,37
1,57
1,57
1,57
1,57
1,37
1,37
1,37
1,37
1,57
1,75
1,37
1,37
1,37
1,37
1,37
1,57
1,57
1,75
1,75
1,75
1,75
1,97
1,97
1,37
1,75
1,97
0,70
0,70
0,70
1,37
0,70
0,31
0,31
0,31
0,31
0,31
0,45
0,19
0,31
0,60
30x2
25x3
25x3,5
25x3/30x2
30x2
30x2
25x3
25x3,5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1,37
1,37
1,75
1,75
1,97
1,97
1,57
1,57
1,57
1,57
0,87
0,87
0,87
0,60
0,87
0,85
0,58
0,58
30x2
30x2
30x2
50x5
30x2
Remarks
Solid core cable horizontal splice
Multi -strand cable to cable splice
Horizontal + cable to cable connection
Horizontal X cable to cable connection,
one cable cut
Parallel horizontal conductors
cable to cable
Parallel vertical conductors
cable to cable
Cable to cable
Cable to tape
Horizontal round or cable
conductor to flat steel surface
or top of horizontal pipe
Sleeve : H105
Tape to cable
B
A
B
BM
A
EB
®
B
VGC-Y1
VGC-Y2
VGC-Y3
VGC-Y4
VGC-Y5
VGC-Y6
VSC-Y3
VSC-Y4
VSC-Y5
VSC-Y6
BMP-BAK
BMP-CAJ
G-BMP-DAJ
BMP-CAJ-BAK
EBP-BAK
EB-BGP-BAK
EBP-CAJ
G-EBP-DAJ
228521
224815
222939
228347
223076
223609
221407
221405
221404
221403
234429
234426
224123
234736
225788
234398
234991
223432
6,4
7,6
9,0
11,0
12,5
14,2
9,0
11,0
12,5
14,2
25
35
50
70
95
120
50
70
95
120
60
75
87,5
75
60
60
75
87,5
60
75
87,5
60
60
60
75
87,5
50
Cable through connections on
vertical flat steel surface
Cable to vertical steel surface
Tape to tape
Tape to tape
www.erico.com
®
Weld metal
size required
45
65
32
32
45
65
90
115
32
45
45
90
90
45
115
150
150
90
200
200
45
65
90
115
150
200
45
65
90
115
90
150
200
45
65
90
115
200
250
45
90
200
65
65
90
90
90
45
32F33
45
45
45
65
15F33
25
65
Frame
Page 53
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-161
L-161
L-161
L-160
L-161
M-129
M-129
M-129
M-129
M-129
M-129
M-129
M-129
L-161
Toolset
Page 55
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
Scraper tools
Page 55
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-7A
TP-7A
TP-3B
TP-3B
TP-3B
TP-7A
TP-7A
TP-3B
TP-7A
TP-2A
TP-2A
TP-7A
TP-2A
TP-2A
TP-3B
TP-3B
TP-7A
TP-7A
TP-2A
TP-2A
TP-3B
TP-3B
TP-7A
TP-7A
TP-7A
TP-2A
TP-2A
TP-3B
TP-3B
TP-7A
TP-7A
TP-2A
TP-2A
TP-3B
TP-7A
TP-2A
TP-5B
TP-5B
TP-5B
TP-7A
TP-5B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-5B
45
45
115
115
150
150
90
90
115
115
65
65
65
90
90
90
65
65
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-161
L-161
L-161
L-161
L-161
L-161
L-161
L-161
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-3B
TP-3B
TP-7A
TP-7A
TP-2A
TP-2A
TP-7A
TP-7A
TP-7A
TP-7A
TP-5B
TP-5B
TP-5B
TP-2A
TP-5B
TP-5B
TP-5B
TP-5B
www.erico.com
CADWELD® PLUS Control Units
PLUSCU
Reference code
Part No.
PLUSCU
PLUSCU15L
PLUSCULD
PLUSCULD15
165738
165745
165739
165746
Description
Control Unit with 1,80 m lead
Control Unit with 4,60 m lead
Replacement Lead 1,80 m long
Replacement Lead 4,60 m long
1
1
1
1
Unit
weight kg
0,907
1,088
0,146
0,306
FLINT IGNITOR T320 AND SPARE FLINTS
T320A
T320
Reference code
Part No.
T320
T320A
165000
165010
1
10
Unit
weight kg
0,090
0,015
BRUSHES
T314A
T314
KIT-120-3/4
T313
Reference code
Part No.
T313
T314
T314A
KIT-120-3/4
165040
165130
165270
165260
1
1
1
1
Unit
weight kg
0,070
0,375
0,070
0,040
BAFFLE MOULD COVER
51
Reference code
Part No.
MC2X2KIT
MC2.5X3KIT
MC3X3KIT
MC4X4KIT
165740
165744
165741
165742
1
1
1
1
Unit
weight kg
0,113
0,113
0,227
0,227
CADWELD
CADWELD
CADWELD
®
Reference
code
CHP-BAK
Mould
Part No.
Diameter
Amm
Bmm
Section
Bmm2
Sizes
mm
30x2
1
Unit
weight kg
0,70
Lug or tape to horizontal surface
Remarks
234733
Amm2
60
CGP-BAK
234732
60
30x2
1
0,70
Lug or tape to horizontal surface
CCP-BAK
234734
60
30x2
1
0,70
Lug or tape to vertical surface
CFP-BAK
CFP-CAJ
G-CFP-DAJ
BWP-BAK
232003
233366
225147
239887
60
75
87,5
60
30x2
25x3
25x3,5
30x2
1
1
1
1
0,52
0,70
0,70
0,90
Lug or tape to vertical surface
Lug or tape to vertical surface
B
GRC-P172-Y3
B-GRC-P143-Y3
226567
238039
17,2
14,2
9,0
9,0
232,4
160,6
50
50
1
1
1,75
1,75
Single stranded cable to top of ground rod
14,2
14,2
14,2
14,2
14,2
17,2
17,2
17,2
17,2
17,2
19
14,2
17,2
12,8
14,2
12,8
14,2
160,6
160,6
160,6
160,6
160,6
232,4
232,4
232,4
232,4
232,4
283,5
160,6
232,4
128,7
158
25
35
50
70
95
25
35
50
70
95
66,5
60
60
128,7
158
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1,75
1,75
1,75
1,57
1,57
1,75
1,75
1,57
1,57
1,57
1,57
0,70
0,68
1,75
1,97
Single stranded cable to top of ground rod
B
233901
229737
225814
232996
223520
228682
226670
226083
227687
227549
223138
234735
239694
232537
237727
6,4
7,6
9,0
11,0
12,5
6,4
7,6
9,0
11,0
12,5
10,7
A
GE
GTC-P143-Y1
GTC-P143-Y2
GTC-P143-Y3
GTC-P143-Y4
GTC-P143-Y5
GTC-P172-Y1
GTC-P172-Y2
GTC-P172-Y3
GTC-P172-Y4
GTC-P172-Y5
GTC-P190-2G
CPP-P143-BAK
CPP-P172-BAK
GEC-P128
GEC-P143
A
GF
B
GFC-P143-Y3
GFC-P165-G2-B
238544
238556
14,2
16,5
9,0
9,5
160,6
214
50
50
1
1
1,75
1,75
Horizontal stranded cable to ground
or other rod splice
LAC-Y1-BAH
LAC-Y1-CAJ
LAC-Y2-BAH
LAC-Y2-CAJ
LAZ-Y3-BAK
LAC-Y3-BAH
LAC-Y3-BAJ
LAC-Y3-CAJ
LAC-L9-EAK-A
BJC-BAK-CROW
224800
222501
224150
221443
234740
239534
222122
221455
233795
234770
6,4
6,4
7,6
7,6
9,0
9,0
9,0
9,0
10,0
25
25
35
35
50
50
50
50
60
60
40
75
40
75
60
40
50
75
120
60
20x2
25x3
20x2
25x3
30x2
20x2
25x2
25x3
30x4
30x2
1
1
1
1
1
1
1
1
1
1
1,37
1,37
1,37
1,37
0,70
1,37
1,37
1,37
1,75
2,20
Stranded cable to lug or tape
BYC-BAK-CROW
234760
60
60
30x2
1
1,60
Crowsfoot with flat tape
RCP-Y1
RCP-Y2
RCP-Y3
RCP-Y4
RCP-Y5
RCP-Y6
RTP-Y1
RTP-Y2
RTP-Y3
RTP-Y4
RTP-Y5
RTP-Y6
234581
234585
234582
234588
234592
234593
234441
234444
234445
234447
234453
234454
S-2904B
S-2904B
S-2904B
S-2904B
S-2904B
S-2904C
S-2904B
S-2904B
S-2904B
S-2904B
S-2904A
S-3121
Batting
25
35
50
70
95
120
25
35
50
70
95
120
1
1
1
1
1
1
1
1
1
1
1
1
0,68
0,68
0,68
0,68
0,68
0,68
0,62
0,62
0,62
0,62
0,62
0,62
Single stranded cable to rebar
CH
CG
CC
A
CF
BW
GR A
B
A
GT
B
CP
A
A
B
LA
30x2
30x2
Tape to ground rod
Horizontal ground round
to ground rod splice
Crowsfoot with edgewise tape
CROWS FOOT edgewise
CROWS FOOT horizontal
B
RC
B
6,4
7,6
9
11
12,5
14,2
6,4
7,6
9
11
12,5
14,2
Single stranded cable to rebar
CADWELD
A
RT
A
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
52
www.erico.com
Weld metal
size required
90
Frame
Page 53
L-161
®
Toolset
Page 55
TS CST
Scraper tools
Page 55
TP-5B
FRAMES
L160
90
L-161
TS CST
TP-5B
90
L-161
TS CST
TP-5B
65
65
65
65
L-161
L-161
L-161
L-161
TS CST
TS CST
TS CST
TS CST
TP-5B
TP-5B
TP-5B
TP-5B
90
115
L-160
L-160
TS CST
TS CST
TP-7A
TP-7A
90
90
90
115
115
90
90
115
115
115
115
90
115
150
150
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-161
L-161
L-160
L-160
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-5B
TP-3B
TP-7A
TP-2A
90
115
L-160
L-160
TS CST
TS CST
TP-7A
TP-7A
32
45
32
45
90
45
45
65
90
115
L-160
L-160
L-160
L-160
L-161
L-160
L-160
L-160
L-160
L-160
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-3B
TP-3B
TP-3B
TP-3B
TP-5B
TP-3B
TP-3B
TP-3B
TP-7A
TP-2A
200
L-160
TS CST
TP-2A
45
45
65
90
90
90
45
45
90
90
90
115
L-161A
L-161A
L-161A
L-161A
L-161A
L-161A
SMK 21
SMK 21
SMK 21
SMK 21
SMK 21
SMK 21
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
161000
161740
Clamp for frame L160
161020
L159
B135
161780
Clamp for frame L159
161010
L161
L160V
161660
L161A
161090
SMK21
161080
SKK1
162070
Chain support clamp
for C & R moulds
M129
161030
M32
161060
Clamp for frame L160
Reference code
L160
L159
L161
B134
B135
L161A
L160V
M129
M32
SMK21
SKK1
www.erico.com
B134
53
Part No.
161000
161020
161010
161740
161780
161090
161660
161030
161060
161080
162070
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
1,185
1,325
0,380
0,360
0,414
1,010
1,775
0,315
0,880
0,670
0,500
CADWELD
CADWELD
CADWELD
®
RASP
BATTING FOR P MOULD
185030 - 185020 - 185010
Used with CADWELD® “P” moulds
Reference code
Part No.
T321C (complete)
T321 (holder)
T321A (blade)
162630
162420
162430
1
1
1
Unit
weight kg
0,740
0,455
0,285
Reference code
S2904C
S2904B
S2904A
CABLE CLAMP B265
Sizes
mm
50x60x12
50x60x20
50x60x25
Part No.
185030
185020
185010
25
25
25
Unit
weight kg
0,005
0,008
0,009
COPPER SLEEVES
Reference code
Part No.
B265
165020
1
Unit
weight kg
0,348
Available on
Request
C
B
A
CADWELD MOULD SEALER
Reference code
T403
1
Unit
weight kg
0,910
1
1
Unit
weight kg
0,260
0,100
Part No.
165280
Reference
code
H101
H102
H103
H104
H105
H107
H108
H109
H113
H115
H117
Part No.
180140
180170
180180
180190
180230
180690
180010
180020
180350
180700
180430
A
mm
8
6,4
7,7
19
5
11
20
14
10
6,35
9
B
mm
6
4,3
5,3
17
3
9
18
12
8
4,83
7
C
mm
26
25
25
26
23,5
26
26
26
26
25
25
50
50
50
50
50
50
50
50
50
50
50
Unit
weight kg
0,005
0,004
0,006
0,013
0,003
0,008
0,014
0,010
0,007
0,003
0,006
BLOWLAMP SOUDO 360 AND
VALVED CARTRIDGE
CADWELD
11200327
11200300
Reference code
Part No.
11200327
11200330
140160
140180
54
www.erico.com
CADWELD
®
SLEEVES
TOOL BOXES
Length
+ flair
B
T322
Available on
Request
A
Plywood Box
400 x 190 x 190 mm
300 x 155 x 500 mm
C
Reference
code
H101F
H102F
H103F
H104F
H106F
H107F
H108F
H109F
H111F
H112F
H113F
H114F
H116F
H117F
H104BF
H106AF
H109AF
H111AF
H113AF
Part No.
180150
180390
180380
180200
180250
180270
180280
180300
180320
180340
180360
180040
180740
180080
180220
180260
180310
180330
180030
A
mm
8
6,4
7,7
19
17
11
20
14
15
12
10
25
13
9
19
17
14
15
10
B
C
mm mm
6
25
4,3 25
5,3 25
17 25
15 25
9
25
18 25
12 25
13 25
10 25
8
25
21 25
11,5 25
7
25
17 34
15 34
12 34
13 34
8
34
Length
+ flair
26
26
26
26
26
26
26
26
26
26
26
26
26
26
35
35
35
35
35
Unit
weight kg
0,005
0,004
0,006
0,013
0,009
0,008
0,014
0,010
0,011
0,008
0,007
0,032
0,007
0,006
0,018
0,012
0,013
0,014
0,009
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
TP2A
TP4A
TP5A
TP6A
TP7A
TP3B
TP5B
B136A
B136B
B136F
182030
182040
182010
182050
182020
182060
182070
182125
182130
182135
Equivalent
Ref. Code
B136B
B136F
B136A
B136A
B136B
B136A
B136A
T322
Plywood box
165110
4572
1
1
Unit
weight kg
2,540
3,995
25
Unit
weight kg
0,001
1
Unit
weight kg
0,450
WRAP SLEEVE
Reference code
Part No.
B140
165610
Dimensions
mm
76x25x0,20
Equivalent
Part No.
182130
182135
182125
182125
182130
182125
182125
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
0,144
0,172
0,116
0,126
0,132
0,045
0,060
0,045
0,077
0,080
Reference code
Part No.
TS-CST
197290
CADWELD
Part No.
Part No.
TOOLSET
SCRAPER TOOLS
Reference code
Reference code
www.erico.com
55
®
CADWELD KITS
CADWELD® MULTI Kit and
CADWELD® PLUS MULTI Kit
Description
GROUND NETWORK KITS FOR RAISED
ACCESS FLOORS
Reference Part No.
Code
Unit Weight
(kg)
Kit for 20 welds, in metallic box
KITCDM01 167780
14” x 13” x 6” (360 x 330 x 160 mm)
1
10.00
Kit for 20 welds using CADWELD PLUS KITCDM01 167781
in metallic box (Control Unit sold separately)
PLUS
14” x 13” x 11” (360 x 330 x 280 mm)
Made from the following items which can be ordered separately: Qty. in Kit
1
11.50
Mould
Handle Clamp
CDM01
234720
FMCDM01 120882
1
1
1.000
1.100
Set of 33 battings/gaskets
Welding Material 90*
CADWELD PLUS Welding Material**
Toolset TS-6A, including:
• gloves
• cardcloth brush
• soft brush • flint ignitor
SCDM01
90
90PLUSF20
TS6A
120886
2
1
163040 2 boxes of 10 10
165705 2 boxes of 10 10
169930
1
1
0.200
0.090
0.158
0.490
1
1
546330
+ 546340
546330
546330
+ 546320
Reference
Part No.
Description
code
• • • Connections on lifting jack feet
BK-CCR-2
546330
Basic kit, 200 welds
1
RK-CCR-2
546300
Consumable item, kit 200 welds
1
• • • Additional connections (for braid 5 to 16 mm2 and tape 30 x2)
BB-CCR
546320
Braid/braid accessory
1
BF-CCR
546340
Braid/tape accessory
1
Unit
weight kg
6,000
3,000
0,200
0,100
CATHODIC PROTECTION KITS
* in KITCDM01 = Traditional CADWELD MULTI Kit
** in KITCDM01PLUS = CADWELD PLUS MULTI Kit
CADWELD® KITS
GT
RT
CADWELD DIRECT
1
10 mm
Reference
Cable cross
Part No.
code
section mm2
• • • Basic CADWELD kit 20 welds
KIT CPD 2,5/16
167260
2,5 to 16
KIT CPD-25
167280*
25
KIT CPD-35
167300*
35
• • • Consumable item CADWELD kit 20 welds
CPD 2,5/16 PACK
167270
2,5 to 16
CPD-25 PACK
167290*
25
CPD-35 PACK
167310*
35
*Available upon request.
35 mm2
RC
Reference code
GY
Part No.
GY
LA
Welds
Figure per
kit
A 15 mm
Unit
weight kg
CADWELD
• • • Compact kit (20 welds)
GT-P128
169310
PG-25/29
168050
PG-35
168060
VG-25/29
168090
VG-35
168100
GY-35
168180
GY-50
168190
• • • Maxi kit (60 welds)
PG-25/29-Z
168380
PG-35-Z
168390
PG-50-Z
168400
PG-70-Z
168410
VG25/29-Z
168440
VG35-Z
168450
VG50-Z
168460
VG70-Z
168470
RT-25-Z-10
169990
RT-35-Z-10
168830
RT-50-Z-10
168850
RC-35-Z-10
168890
RC-50-Z-10
168910
GY-35-Z
168630
GY-50-Z
168640
GY-95-Z
168660
LA-Y2-FAK
169600
GYV-35-Z-10
169890
1
2
2
3
3
6
6
20
20
20
20
20
20
20
1
1
1
1
1
1
1
2,110
2,015
2,225
2,265
2,265
2,320
2,600
2
2
2
2
3
3
3
3
4
4
4
5
5
6
6
6
7
8
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6,700
7,450
8,545
8,630
6,525
6,785
7,200
11,00
7,525
7,525
8,695
6
8,225
7,050
7,465
10,560
16,750
6,745
Unit
weight kg
1
1
1
5,760
5,700
5,650
1
1
1
1,025
0,925
0,945
CADWELD BRAZE
Reference
Cable cross
Part No.
code
section mm2
• • • Basic CADWELD kit 20 welds
KIT CPB 2,5/16
167200
2,5 to 16
KIT CPB-25
167220*
25
KIT CPB-35
167240*
35
• • • Consumable item CADWELD kit 20 welds
CPB 2,5/16 PACK
167210
2,5 to 16
CPB-25 PACK
167230*
25
CPB-35 PACK
167250*
35
*Available upon request.
56
Unit
weight kg
1
1
1
6,185
6,095
6,110
1
1
1
1,425
1,320
1,325
www.erico.com
INDEX OF PART NUMBERS IN NUMERICAL ORDER
Part No.
4572
101100
101230
101240
101250
101260
101265
101700
101900
101910
101920
101925
101930
101940
101950
102000
102010
102350
102400
102410
102450
102455
102460
102500
102600
102610
102620
102700
102800
102850
103100
103450
103470
103480
103700
103710
103720
104200
104300
104350
104450
104600
104950
104980
105300
105400
106030
106060
106080
106200
106300
106310
107000
107010
107020
107050
107060
107070
107230
107500
107550
107560
107600
107610
107650
107660
120882
120886
140160
140180
140250
155000
155010
155030
155050
155060
155070
155090
155110
155180
155190
155210
155230
155240
155250
155270
155290
155300
155310
155330
155350
155420
155430
155450
155470
155480
155490
155510
155530
156340
156350
156360
156370
156380
156390
Reference code
Plywood box
CPD-2440
CTR-10
CLR-10
CCR-68-S
CCR-68-CU
CCR-68-GS
ASL-240-CC
ARC-2205-CNC
ARC-2210-CNC
ER1-2000
ER1-ARCC-SS
ER2-2000
ER3-2000
TFS 800
ARC-2205-SS
ARC-2210-SS
ASB-TCA
ASP-100-TS
ASA-TB
ABFF-6530-TC
PC302GS
ABFR-6530-TC
ASFR-C
ATR-10-SS
ACB-10-SS
AEM-10-SS
CCI-70-CA
PCF-40-GS
PCR-21-GS
ACF-2-GS
IP-900-C
IP-R193x122MM
IP-SQ-180CI
SRL23-N6
SRL-23-N8
SRL-23-N10
R1-SRL-25A6
R1-SFT-25
R2-SRL-25
R2-SFT-25
R3SFT-25
R6-SRL-40/6
R6-SFT-40
T1-SRL-25/6
T1-SFT-25
SFR-BC-8
SFT-BE
SFT-BC
SFRR-SRL-45/6
SFRR-SFT-45
SFRR-SFT-65
SPC-5080-S
SPC-70120-S
SPC-130180-S
SPC-5080-C
SPC-70120-C
SPC-130180-C
SGR-610-2
SDH-3-GI
SSF-6-GS
SSF-6-C
STBF-25-GS
STBF-40-GS
SFT-23-N
SFTP-23-N
FMCDM01
SCDM01
11200327
11200330
TC-BR-253
1,2M38
1,5M38
2,1M38
3,0M38
1,2M12
1,5M12
2,1M12
3,0M12
S1,2M916
S1,5M916
S2,1M916
S3,0M916
1,2M58
1,5M58
2,1M58
3,0M58
S1,2M58
S1,5M58
S2,1M58
S3,0M58
1,2M34
1,5M34
2,1M34
3,0M34
S1,2M34
S1,5M34
S2,1M34
S3,0M34
1,0TG16TPWC
1,5TG16TPWC
2,0TG16TPWC
1,0RG16TPWC
1,5G16TPWC
2,0RG16TPWC
www.erico.com
Page
Part No.
55
39
26
26
26
26
26
21
22
22
21
19
21
21
21
22
22
22
22
22
22
24
22
22
22
22
22
25
24
24
22
37
37
37
25
25
25
25
25
25
25
26
25
25
25
25
26
26
26
25
25
25
38
38
38
38
38
38
38
24
37
37
37
37
26
26
49
49
54
54
29
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
35
35
35
35
35
35
156650
156720
156900
156910
158000
158010
158020
158030
158040
158050
158060
158070
158080
158090
158100
158110
158120
158130
158140
158150
158155
158160
158165
158170
158175
158250
158260
158265
158290
158320
158330
158340
158350
158380
158390
158400
158410
158440
158450
158450
158460
158470
158480
158500
158510
158520
158530
158540
158550
158600
158610
158675
158690
158710
158720
158730
158740
158750
158760
158770
158780
158790
158800
158810
158820
158830
161000
161010
161020
161030
161060
161080
161090
161660
161740
161780
162000
162010
162070
162230
162420
162430
162630
163000
163010
163020
163030
163040
163040
163050
163060
163070
163080
163090
163200
163210
163220
163230
163240
163250
163260
163270
163280
163290
163300
Reference code
BR12
BZT-12
C19
C20
CC12F
CC58
CC34
SC916
SC58
SC34
DT12
DT58
DT34
DS916
DS58
DS34
DH12
DH58
DH34
C38
CP38
C58
CP58
C34
CP34
C1
C12
CP12
PT-58-50/300
C142
C162
C174
C205
DH-TR167
DT-P167-25
DT-P137-1-20
RTC1
S-136-20
MR127Z/20
MR127Z/20
MR137/25
MR187Z/30
DT-P187-30
EGRD58
EGRD58L
EGRD34
EGRD34L
15SS20
DT-P11-20-SS
PT-12-25/3000
PT-12-25/300
PT-58-25/300
PT-58-35/300
1,0CG50/5
1,5CG50/5
2,0CG50/5
2,5CG50/5
3,0CG50/5
1,0CG50/3
1,5CG50/3
2,0CG50/3
2,5CG50/3
3,0CG50/3
1,5SG20
1,5SG25
1,5SG30
L160
L161
L159
M129
M32
SMK21
L161A
L160V
B134
B135
S3015
S3054
SKK1
B-162-12KS
T321 (holder)
T321A (blade)
T321C (complete)
25
32
45
65
90
90
115
150
200
250
500
CA15
CA25
CA32
CA45
CA65
CA90
CA115
CA150
25XF19
32XF19
45XF19
Page
Part No.
33
33
37
37
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
37
37
37
37
37
37
37
37
37
34
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
35
36
34
34
34
34
35
35
35
35
35
35
35
35
35
35
35
35
35
53
53
53
53
53
53
53
53
53
53
54
54
53
41
54
54
54
48
48
48
48
48
49
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
163310
163320
163330
163590
163670
165000
165010
165020
165040
165110
165130
165180
165220
165230
165260
165270
165280
165400
165410
165610
165620
165700
165700
165701
165701
165702
165702
165703
165703
165704
165704
165705
165705
165705
165706
165706
165707
165707
165708
165708
165709
165709
165710
165710
165711
165711
165712
165712
165713
165713
165714
165714
165715
165715
165716
165716
165717
165717
165718
165718
165719
165719
165720
165720
165721
165721
165722
165722
165722
165722
165722
165723
165724
165725
165738
165738
165739
165739
165740
165740
165741
165741
165742
165742
165744
165744
165745
165745
165746
165746
166000
166010
166020
166030
166040
166050
166060
166070
166080
166090
166100
166110
166120
166130
166140
57
Reference code
65XF19
90XF19
115XF19
15
GEM
T320
T320A
B265
T313
T322
T314
B165
B166
B167
KIT-120-3/4
T314A
T403
B2618B
B2610A
B140
B2671A
15PLUSF20
15PLUSF20
25PLUSF20
25PLUSF20
32PLUSF20
32PLUSF20
45PLUSF20
45PLUSF20
65PLUSF20
65PLUSF20
90PLUSF20
90PLUSF20
90PLUSF20
115PLUSF20
115PLUSF20
150PLUSF20
150PLUSF20
200PLUSF20
200PLUSF20
250PLUSF20
250PLUSF20
300PLUSF20
300PLUSF20
400PLUSF20
400PLUSF20
500PLUSF20
500PLUSF20
CA15PLUSF33
CA15PLUSF33
CA25PLUSF33
CA25PLUSF33
CA32PLUSF33
CA32PLUSF33
CA45PLUSF33
CA45PLUSF33
CA65PLUSF33
CA65PLUSF33
25PLUSXF19
25PLUSXF19
32PLUSXF19
32PLUSXF19
45PLUSXF19
45PLUSXF19
65PLUSXF19
65PLUSXF19
CA25PLUSXF19
CA25PLUSXF19
CA32PLUSXF19
CA45PLUSXF19
CA65PLUSXF19
CA32PLUSXF19
CA45PLUSXF19
CA65PLUSXF19
PLUSCU
PLUSCU
PLUSCULD
PLUSCULD
MC2X2KIT
MC2X2KIT
MC3X3KIT
MC3X3KIT
MC4X4KIT
MC4X4KIT
MC2.5X3KIT
MC25X3KIT
PLUSCU15L
PLUSCU15L
PLUSCULD15
PLUSCULD15
B161-8A
B161-8K
B161-8KS
B161-10B
B161-10KA
B161-10KM
B164-12A
B164-12K
B164-12KS
DB-8A
DB-8K
DB-8KS
DB-10A
DB-10K
DB-10KS
Page
Part No.
48
48
48
48
37
51
51
54
51
55
51
40
40
40
51
51
54
39
39
55
39
47
48
47
48
47
48
47
48
47
48
47
48
49
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
47
48
48
48
48
47
47
47
47
51
47
51
47
51
47
51
47
51
51
47
47
51
47
51
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
166150
166160
166170
166180
166190
166200
166210
166220
166480
166490
166500
166510
166520
166530
166540
166550
166560
166950
166951
166952
166953
166954
166955
166956
166957
166958
166959
166960
166961
166962
166963
166964
166965
166966
166967
166968
166969
166970
166971
166972
166973
166974
166975
166976
166977
166978
166979
166980
166981
166982
166983
166984
166985
166986
166987
166988
166989
166990
166991
166992
166993
166994
167200
167210
167220
167230
167240
167250
167260
167270
167280
167290
167300
167310
167780
167781
167900
167901
167902
167903
167904
167905
167906
168050
168060
168090
168100
168180
168190
168380
168390
168400
168410
168440
168450
168460
168470
168630
168640
168660
168830
168850
168890
168910
169310
Reference code
DB-12A
DB-12K
DB-12KS
DB-16A
DB-16K
DB-16KS
B-162-12A
B-162-12K
DB-10-C5005
DB-10-C501
DB-10-C502
B161-10-C5005
B161-10-C501
B161-10-C502
B-162-12-C5005
B-162-12-C501
B-162-12-C502
EHL12FCW3
EHL12FCY1
EHL12FCY2
EHL12FCY3
EHL12FCY4
EHL12FC1G
EHL12FC1G1G
EHL12FC1H
EHL12FC1K
EHL12FC1K1K
EHL12FC1L
EHL12FC1T
EHL12FC1V
EHL12FC6MM
EHL12FC8MM
EHL58CW3
EHL58CY1
EHL58CY2
EHL58CY3
EHL58CY4
EHL58C1G
EHL58C1G1G
EHL58C1H
EHL58C1K
EHL58C1K1K
EHL58C1L
EHL58C1T
EHL58C1V
EHL58C2G
EHL58C6MM
EHL58C8MM
EHL34CW3
EHL34CY1
EHL34CY2
EHL34CY3
EHL34CY4
EHL34C1G
EHL34C1H
EHL34C1K
EHL34C1L
EHL34C1T
EHL34C1V
EHL34C2G
EHL34C6MM
EHL34C8MM
KIT CPB 2,5/16
CPB 2,5/16 PACK
KIT CPB-25
CPB-25 PACK
KIT CPB-35
CPB-35 PACK
KIT CPD 2,5/16
CPD 2,5/16 PACK
KIT CPD-25
CPD-25 PACK
KIT CPD-35
CPD-35 PACK
KITCDM01
KITCDM01PLUS
SRGBC120
SRGBD100
SRGBE100
SRGBF100
SRGBG100
SRGC46
SRGC46BR
PG-25/29
PG-35
VF-25/29
VG-35
GY-35
GY-50
PG-25/29-Z
PG-35-Z
PG-50-Z
PG-70-Z
VG25/29-Z
VG35-Z
VG50-Z
VG70-Z
GY-35-Z
GY-50-Z
GY-95-Z
RT-35-Z-10
RT-50-Z-10
RC-35-Z-10
RC-50-Z-10
GT-P128
Page
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
56
56
56
56
56
56
56
56
56
56
56
56
49
49
28
28
28
28
28
28
28
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
INDEX OF PART NUMBERS IN NUMERICAL ORDER
Part No.
169600
169890
169930
169990
180010
180020
180030
180040
180080
180140
180150
180170
180180
180190
180200
180220
180230
180250
180260
180270
180280
180300
180310
180320
180330
180340
180350
180360
180380
180390
180430
180700
180740
180960
182010
182020
182030
182040
182050
182060
182070
182125
182130
182135
185010
185020
185030
197290
197650
197700
197710
197720
197790
197810
197860
197870
197900
197910
197920
197930
197940
197950
197970
197975
198000
198010
198020
198050
198060
198070
198080
198090
198100
198130
198150
198160
198200
198210
198250
198400
198410
198420
221004
221006
221008
221009
221011
221013
221014
221021
221025
221028
221035
221051
221053
221063
221075
221094
221135
221138
221142
221148
221153
221159
221256
Reference code
LA-Y2-FAK
GYV-35-Z-10
TS6A
RT-25-Z-10
H108
H109
H113AF
H114F
H117F
H101
H101F
H102
H103
H104
H104F
H104BF
H105
H106F
H106AF
H107F
H108F
H109F
H109AF
H111F
H111AF
H112F
H113
H113F
H103F
H102F
H117
H115
H116F
H107
TP5A
TP7A
TP2A
TP4A
TP6A
TP3B
TP5B
B136A
B136B
B136F
S2904A
S2904B
S2904C
TS-CST
TC-EC-3020-30
TC-ECT-2020-30
TC-ECT-3020-30
TC-ECT-2530-30
70TC-HGSP-3035
30TC-HGSP-3035
RSCC-8
RSCC-10
SC-EC-25
SC-EC-35
SC-EC-50
SC-EC-70
SC-EC-95
SC-EC-185
TC-ECT-4030-30
TC-ECT-4040-35
IC-EC-25
IC-EC-35
IC-EC-50
IC-ECH-25
IC-ECH-35
IC-ECH-50
IC-ECH-70
IC-ECH-95
IC-ECH-300
IC-ECH-16
RC-EC-6
RC-EC-8
RC-ET-6
RC-ET-8
RAW-8
A822SA111C-5
A822SA111C-10
A822SA111C-20
SSC-Y1
SSC-Y2
SSC-W6
SSC-Y3
SSC-W8
SSC-Y5
SSC-Y6
SSC-Y4
TAC-Y1
TAC-Y2
TAC-Y4
TAC-Y7
TAC-Y8
TAC-Y2-Y1
TAC-Y4-Y2
TAC-Y6-Y4
XAC-Y1
XAC-Y2
XAC-Y3
XAC-Y4
XAC-Y5
XAC-Y6
PTC-Y5
Page
Part No.
56
56
49
56
54
54
55
55
55
54
55
54
54
54
55
55
54
55
55
55
55
55
55
55
55
55
54
55
55
55
54
54
55
54
55
55
55
55
55
55
55
55
55
55
54
54
54
55
27
27
27
27
29
29
29
29
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
28
28
28
28
29
39
39
39
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
221258
221265
221268
221403
221404
221405
221407
221443
221455
221466
221534
221603
221607
221609
222115
222122
222459
222461
222463
222501
222560
222689
222939
223044
223076
223138
223432
223520
223550
223609
223943
224123
224150
224800
224815
225026
225147
225788
225814
226083
226545
226567
226670
227549
227687
228347
228521
228682
229737
230199
231342
231692
232003
232537
232556
232648
232933
232996
233366
233795
233901
234398
234426
234429
234441
234444
234445
234447
234453
234454
234581
234582
234585
234588
234592
234593
234720
234732
234733
234734
234735
234736
234737
234738
234739
234740
234759
234760
234770
234782
234991
236084
237727
237901
238039
238544
238556
239534
239694
239887
240228
502000
502040
503900
504500
Reference code
PTC-Y4
PTC-Y3
PTC-Y1
VSC-Y6
VSC-Y5
VSC-Y4
VSC-Y3
LAC-Y2-CAJ
LAC-Y3-CAJ
HAA-Y1-CA
HAA-Y4
HAA-Y3
HAA-Y2
HAA-Y1
PTC-Y6
LAC-Y3-BAJ
TAC-Y3
TAC-Y5
TAC-Y6
LAC-Y1-CAJ
PCC-Y3
HAA-A3
VGC-Y3
HBA-B3
VGC-Y5
GTC-P190-2G
G-EBP-DAJ
GTC-P143-Y5
PCC-Y1
VGC-Y6
PGC-Y5
G-BMP-DAJ
LAC-Y2-BAH
LAC-Y1-BAH
VGC-Y2
TAC-Y5-Y6
G-CFZ-DAJ
EBP-BAK
GTC-P143-Y3
GTC-P172-Y3
PTC-Y2
GRC-P172-Y3
GTC-P172-Y2
GTC-P172-Y5
GTC-P172-Y4
VGC-Y4
VGC-Y1
GTC-P172-Y1
GTC-P143-Y2
PCC-Y6
PGC-Y4
PGC-Y6
CFZ-BAK
GEC-P128
PGC-Y2
PGC-Y3
LJP-Y3-FAM
GTC-P143-Y4
CFZ-CAJ
LAC-L9-EAK-A
GTC-P143-Y1
EB-BGP-BAK
BMP-CAJ
BMP-BAK
RTZ-Y1
RTZ-Y2
RTZ-Y3
RTZ-Y4
RTZ-Y5
RTZ-Y6
RCZ-Y1
RCZ-Y3
RCZ-Y2
RCZ-Y4
RCZ-Y5
RCZ-Y6
CDM01
CGZ-BAK
CHZ-BAK
CCZ-BAK
CPZ-P143-BAK
BMP-CAJ-BAK
LJP-Y1-BAK
LJP-Y2-BAK
LJP-Y3-BAK
LAZ-Y3-BAK
LEP-Y3-BAK
BYC-BAK-CROW
BJC-BAK-CROW
LWP-Y3-BAK
EBP-CAJ
PGC-Y4-Y1
GEC-P143
PGC-Y1
B-GRC-P143-Y3
GFC-P143-Y3
GFC-P165-G2-B
LAC-Y3-BAH
CPZ-P172-BAK
BWZ-BAK
HAA-B3-CA
ALUM 3ME
MBMAST3ME
GF-302
WM3-2088-B
Page
Part No.
50
50
50
50
50
50
50
52
52
50
50
50
50
50
50
52
50
50
50
52
50
50
50
50
50
52
50
52
50
50
50
50
52
52
50
50
52
50
52
52
50
52
52
52
52
50
50
52
52
50
50
50
52
52
50
50
50
52
52
52
52
50
50
50
52
52
52
52
52
52
52
52
52
52
52
52
49
52
52
52
52
50
50
50
50
52
50
52
52
50
50
50
52
50
52
52
52
52
52
52
50
18
18
37
28
504510
504520
504530
504540
504550
504590
545000
545001
545010
545020
545030
545040
545130
545135
545140
545170
545180
545190
545200
545210
545260
545270
545530
546300
546320
546330
546340
550900
551520
556620
556630
556640
556650
556660
556670
556680
556690
556700
556710
556720
556730
556740
556750
556760
556770
556780
556790
556800
556810
556820
556830
556840
556850
556860
556940
556950
556960
556970
556980
563300
563320
563340
563350
563360
563370
563390
563400
563430
563440
563540
563550
563560
565000
591080
591230
591280
591290
593480
700001
700002
700003
700004
700005
700006
700310
700355
700360
700405
700410
700455
700465
700475
700526
700527
700630
700640
700650
700805
700815
700850
700860
700865
701000
701030
701250
58
Reference code
WM2-1030-B
WM3-1020-B
WM2-1020-B
WMS-1030-B
PC2.-1020
PC3-0909
DLUNI
SEB-GER-08
SEB-06
SEB-06-DL
SEB-10
SEB-10-DL
SEB-62-DL
BEP25x5x200
BEP25x5x300
CCS-308
CCG-308
SEP
TC-ECT-3020-75
RC-EC-8-3
SR
CCFR-308
BEP25x5x150
RK-CCR-2
BB-CCR
BK-CCR-2
BF-CCR
HDB5010
ISO40M410
MBJ 16-100-8
MBJ 16-150-8
MBJ 16-200-8
MBJ 16-250-8
MBJ 16-300-8
MBJ 25-100-10
MBJ 25-150-10
MBJ 25-200-10
MBJ 25-250-10
MBJ 25-300-10
MBJ 30-100-10
MBJ 30-150-10
MBJ 30-200-10
MBJ 30-250-10
MBJ 30-300-10
MBJ 35-100-10
MBJ 35-150-10
MBJ 35-200-10
MBJ 35-250-10
MBJ 35-300-10
MBJ 50-100-10
MBJ 50-150-10
MBJ 50-200-10
MBJ 50-250-10
MBJ 50-300-10
MBJ 16-500-8
MBJ 25-500-10
MBJ 30-500-10
MBJ 35-500-10
MBJ 50-500-10
MBJ 16-200-6
MBJ 16-300-6
MBJ 25-200-6
MBJ 50-200-6
MBJ 50-200-16
MBJ 50-200-18
MBJ 50-300-16
MBJ 50-300-18
MBJ 25-200-12
MBJ 50-200-12
MBJ 16-100-6
MBJ 16-150-6
MBJ 50-500-12
MBJ 35-250-25
CEI20
FEI20
BEI20
42014
VFST10x40
TDF3A120V
TDF3A240V
TDF10A120V
TDF10A240V
TDF20A120V
TDF20A240V
CSP NMF 90
CSP NMF 600
CSP BNC 90
CSP BNC 600
CSP NB 90
CSP NB 600
DDI35
DDI63
LAN RJ45 1
LAN RJ45 24
DEP RS232 25 25
DEP RS232 9 9
DEP RS422 9 9
HSP10K36
HSP10K12
HSP10K72
HSP10K230
RTP 30 34
DSF6A 30V
DSF6A 275V
TDS SC
Page
Part No.
28
28
28
28
28
28
38
38
38
38
38
38
38
37
37
24
24
39
27
28
24
24
37
56
56
56
56
28
38
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
25
25
25
25
38
43
43
43
43
43
43
44
44
44
44
44
44
43
43
44
44
44
44
44
44
44
44
44
43
43
43
43
701280
701305
701315
701320
701340
701350
701360
701370
701380
701390
701410
701420
701460
701535
701536
701537
701540
701610
701840
701875
701895
701915
701990
702005
702030
702040
702050
702065
702085
702089
702090
702100
702165
702175
702180
702230
702240
702250
702255
702260
702265
702270
702275
702280
702285
702290
702295
702296
702297
702298
702299
702301
702306
702350
702360
702370
702380
702400
702402
702420
702436
702460
702466
702478
702480
702491
702496
702506
702510
702521
702525
702530
702535
702560
702566
702581
702591
702601
702670
702680
702721
702750
702800
702810
702811
702820
702821
702830
702840
702860
702900
703000
705506
705560
710010
710020
710030
710040
710050
710060
710070
710080
710090
710090
710100
Reference code
GUYRING
GUYKIT 4MGRIP
GUYKIT 7MGRIP
I/LCOUPL
MBMAST4M
MBMAST5M
MBMAST6M
ALUM 4M
ALUM 5M
ALUM 6M
CONSAD/FX
CABTIE-SS
UBOLT
SI25
SI40
SI65
SLP10K1F
LCO01A
THERMLUGCOUPL
ERICORE/PER M
ERICORE/TRM/IS
ERICORE/TRM/OS
CONSAD/E2
ERICORE/LT KITA
FRP/2M/BLACK
FRP/2M/WHITE
LEC-IV
7000250S4
D/SMKIV-SS
INTMKIV-SS
DSF6A 30V
EARTH ANALYSER
TMC-SS
ALOF1-GS
LSEB 4554
WPC
HSF
R7-SFT-20
ER1-1000-SS
ER1-2000-SS
ER2-2000-SS
ER2-3000-SS
ER3-2000-SS
ER3-3000-SS
SG-AERIAL-302
ER2-BASE
ER3-BASE
INTCPT-ADBUTT
INTCPT-ADF2BSPF
INTCPT-ADF2NSP
INTCPT-ADM3/4UNC
INTCPT-ADM116UN
INTCPT-ADM16
ESTREELKIT500
EST101
EST201
EST301
SGD1100 2S NE
SGD112 1S NE
DSD1150 2SR 275
DSD140 M 150
DSD160 1SR 275
DSD160 M 275
DSD140 1S 75
DSD140 1S 150
DSD140 1S 275
DSD140 M 275
DSD140 M 440
DSD140 1SR 150
DSD140 1SR 275
CATV MF
DSD140 1SR 440
CATV F
DSD110 1S 275
DSD110 M 275
DSD340 TNC 275 A
DSD340 TNS 275 A
DSD340 TT 275 A
DSD120 1S 12
DSD120 1S 24
DLT
DSD140 2BR 24/48
UTB5
UTB15
UTB15EX
UTB30
UTB30EX
UTB60
UTB110
UTBSA
PEC100
CCTV 12
DSD140 M 440
DSD110 1S 275
SSR16
AAR0515
CTR-8CU
CTR-8AL
TECLP-8-CU
TECLP-8-AL
SCR15
SCR20
CDS15
CDS15
CDS20
Page
19
19
19
18
18
18
18
18
18
18
19
19
18
19
19
19
44
44
19
18
18
18
19
18
18
18
19
18
18
18
43
32
22
22
22
22
26
26
19
19
19
19
19
19
22
19
19
19
19
19
19
19
19
32
32
32
32
43
43
43
43
43
43
43
43
43
43
43
43
43
44
43
44
43
43
43
43
43
44
44
44
44
44
44
44
44
44
44
44
44
40
44
43
43
34
21
26
26
38
38
34
34
34
34
34
www.erico.com
INDEX OF PART NUMBERS IN NUMERICAL ORDER
Part No.
710110
710115
710120
710120
710130
710140
710150
710160
710170
710180
710190
710200
710210
710220
710230
710240
710250
710260
710270
710290
710295
710300
710305
710310
710320
710325
710330
710335
710345
710350
710355
710360
710365
710370
710380
710390
710400
710410
710420
710430
710440
710450
710460
710470
710480
710490
710500
710510
710515
710520
710535
710540
710545
710555
710560
710570
710580
710595
710605
710615
710616
710620
710625
710630
710645
710655
Reference code
PBD10
SSD10
SPK15
SPK15
SPK20
EBR-58
EBR-34
500-10-E-BOSS
SFO50
PIT03
PC1.5-0606
PC3-0606
PC1.5-0909
OXINH1BCOMP
EML663
EML993
ABBC
BBBC
AWPB
PFC001
PFA001
GBH C
GBH A
BWPB
WPB010
RC70
SEB001
RC100
RTC3020
RTC2051
EK16
RTC2526
EK17
UB16
UB20
UB25
GUV16070
GUV70185
RCC10
RCC16
SRC15
SRC20
TC-EC-1215-30
TC-EC-1230-30
TC-EC-2015-30
TC-EC-2030-30
TC-EC-2515-30
TC-EC-2530-50
TC-EC-2530-25
TC-EC-2540-30
TC-EC-2560-15
TC-EC-3160-30
TC-EC-3650-50
TC-EC-3850-10
TC-EC-3860-30
TC-EC-5030-30
TC-EC-5060-20
CTBL253-25
CTBN253-25
LSF-253
CTGN253-25
CTGN256-30
LCT-253
CTGN506-30
CTGY253-25
CTST253-25
www.erico.com
Page
Part No.
34
34
34
34
34
40
40
39
40
37
28
28
28
40
28
28
38
38
38
23
23
23
23
38
38
39
39
39
36
36
39
36
39
36
36
36
36
36
37
37
37
37
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
28
27
27
27
710666
710667
710670
710680
710690
710700
710710
710730
710740
710750
710760
710770
710780
710790
710800
710810
710820
710830
710840
710850
710860
710870
710875
710880
710890
710900
710920
710940
710955
710960
710965
710970
710980
710990
711000
711010
711030
711040
711050
711060
711070
711080
711090
711100
711110
711120
711130
711140
711150
711160
711170
711180
711190
711195
711200
711210
711220
711230
711230
711240
711250
711260
711270
711280
711290
711300
Reference code
CTWH253-25
CTYGN253-25
HDB2003
HDB2503
HDB2506
HDB3806
HDB5006
THDB5060
FAT-253-50
ATBL253
ATBN253
ATGY253
ATST253
ATWH253
SCBL
SCBN
SCGY
SCST
SABL
SABN
SAGY
SAST
SC-EC-06
SC-EC-10
SC-EC-16
SC-EC-120
SC-EC-150
SC-EC-400
BAT-2030
BAT-2560
BAT-5060
IC-ECH-240
IC-ECH-120
IC-ECH-150
IC-ECH-185
CAR2015
AVG3.0
PC010A
AAR0510
AAR1010
AAR1015
CAR0510
CAR0515
CAR1010
CAR1015
CMPR
ATBA10
ATBA15
ATBC10
ATBC15
RSC115
ABR015
CBR015
ALD-TAP302 (10x4.8x2)
TTRA16
TTRC16
DCC253
DCC256
DCC256
DCC506
DCC600
DCC605
DCC610
PDC253BN
PDC253GY
PDC25BL
Page
Part No.
27
27
28
28
28
28
28
28
29
29
29
29
29
29
28
28
28
28
29
29
29
29
27
27
27
27
27
27
29
29
29
27
27
27
27
21
24
23
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
26
21
21
23
23
23
23
23
23
23
23
23
23
711310
711320
711330
711340
711350
711360
711370
711380
711390
711400
711410
711425
711430
711440
711450
711460
711470
711480
711490
711500
711520
711530
711540
711550
711560
711570
711580
711590
711620
711630
711640
711650
711660
711670
711680
711690
711700
711710
711730
711740
711750
711760
711800
711810
711820
711830
711840
59
Reference code
PDC25BN
PDC25GN
PDC25GY
PDC25ST
PDC25WH
PDC506BL
PC008A
PC008C
PC010C
STA253
STC253
STC256-506
OBA268
OCB268
PCT400
EBL04
EBL08
BIM700
BIM800
BIM900
DT50
ASCO8
TAPA203
TAPA253
TAPC203
TAPC253
TAPC254
TAPC506
TAPS302
DCC203
DCC254
DCC313
DCC316
DCC383
DCC385
DCC386
DCC503
DCC504
DCA253
DCA256
DCA506
DCA600
HF250BN
HF250GY
HFP253BN
HFP253GY
HFP253ST
Page
23
23
23
23
23
23
23
23
23
24
24
24
24
24
24
39
39
24
24
24
40
29
23
23
23
23
23
23
26
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com
and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings
may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED
(INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All
other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon
ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as
provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or
return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability
shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR
DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
Due to a policy of continuing product development, specifications are subject to change without notice.
ANSI is a registered trademark of American National Standards Institute
CSA is a copyright of Canadian Standard Association International
IEEE is a registered trademark of The Institute of Electrical and Electronics Engineers, Inc
Krone-LSA is a registered trademark of Krone GmbH.
NEC is a registered trademark of, and National Electrical Code (NEC) standard is a copyright of the National Fire Protection Association
NFPA is a registered trademark of National Fire Protection Association
UL is a registered trademark of Underwriters Laboratories, Inc.
60
www.erico.com
ERICO® Facility Electrical Protection Literature
Facility Electrical Protection Solutions Brochure
Discusses effective facility electrical protection. The catalog details the ERICO® Six Point
Plan of Protection and goes on to cover lightning protection, grounding, bonding and
surge protection in depth. Products and detailed drawings are included, as are industries
to which the technologies are most applicable.
ERITECH® Lightning Protection Catalogs
ERITECH® SYSTEM 2000 Lightning Protection Products catalog highlights products used
in conventional lightning protection. Products detailed include conductors, ground rods
and plates, clamps, splices, points and accessories.
ERITECH® SYSTEM 3000 Lightning Protection Products catalog details the active
lightning protection process. Information on air terminals, downconductors and design
software is included.
ERITECH® Grounding Products Catalog
Details ERICO’s extensive offering of ground rods and accessories, ground mesh and
mats, signal reference grids, ground bars, ground receptacles, transient earth clamps,
ground enhancement materials, and other grounding materials.
CADWELD® Welded Electrical Connections Catalog
Covers the range of hardware required to make a CADWELD connection as well as
detailed ordering information for molds, weld materials, fence and gate jumpers and the
smokeless CADWELD® EXOLON process.
CRITEC® Surge Protection Products Catalog
Details the extensive range of CRITEC Surge Protection Devices for industries such as
commercial & industrial, process control & automation and telecommunications. It
includes information on AC protection products, data control and signal protection
products, as well as point-of-use protection products.
www.erico.com
AUSTRALIA
GERMANY
POLAND
6 Chilvers Road
P.O. Box 148
Thornleigh (Sydney) NSW 2120
Australia
Phone 61-2-9479-8500
Fax 61-2-9484-9188
66851 Schwanenmühle
Germany
Phone 49-6307-918-10
Fax 49-6307-918-150
ul. Krzemieniecka 17
54-613 Wroclaw
Poland
Phone 48-71-374-40-22
Fax 48-71-374-40-43
BELGIUM
HONG KONG
SINGAPORE
Postbus 33
3110 Rotselaar
Belgium
Phone 32-14-69-96-88
Fax 32-14-69-96-90
Unit 1, 2nd Floor, Block A
Po Yip Building
62-70 Texaco Road
Tsuen Wan, New Territories
Hong Kong
Phone 852-2764-8808
Fax 852-2764-4486
Jurong Industrial Estate
16 Wan Lee Road
Singapore 627 946
Phone 65-6-268-3433
Fax 65-6-268-1389
BRAZIL
HUNGARY
SPAIN
R. Dom Pedro Henrique de Orleans
E Braganca, 276
Vila Jaguara
São Paulo CEP 05117-000
Brazil
Phone 55-11-3621-4111
Fax 55-11-3621-4066
P.f. 184
1476 Budapest
Hungary
Phone 31-13-58-34-547
Fax 31-13-58-35-499
C /Provenza 288, Pral.
08008 Barcelona
Spain
Phone 34-93-467-7726
Fax 34-93-467-7725
CANADA
INDONESIA
SWEDEN
P.O. Box 170
Mississauga, Ontario
Canada L5M 2B8
Phone 1-800-677-9089
Fax 1-800-677-8131
Sudirman Square Tower B 19th Fl.
Jalan Jend. Sudirman Kav. 45-46
Jakarta 12930
Indonesia
Phone 62-21-575-0941
Fax 62-21-575-0942
Box 211
201 22 Malmö
Sweden
Phone 46-40-611-13-60
Fax 46-40-611-94-15
CHILE
ITALY
SWITZERLAND
Alcantara 200, piso 6 Of. 17
Las Condes, Santiago
Chile
Phone 56-2-370-2908
Fax 56-2-370-2914
A&B Business Center
Via Valla 16, nr. 17
20141 Milano
Italy
Phone 39-02-8474-2250
Fax 39-02-8474-2251
Postfach 54
3280 Murten
Switzerland
Phone 00-800-5000-1090
Fax 00-800-6000-1090
CHINA
MEXICO
THAILAND
Room 1204
Tomson Commercial Building
No. 710 Dongfang Road
Pudong, Shanghai
P.R. China 200122
Phone 86-21-5081-3900
Fax 86-21-5831-8177
Melchor Ocampo 193
Torre A piso 13
Col. Veronica Anzures
11300 Mexico D.F.
Mexico
Phone 52-55-5260-5991
Fax 52-55-5260-3310
163 Ocean Insurance Bldg.
16th Fl. Unit B
Surawongse Road
Bangrak Bangkok 10500
Thailand
Phone 66-2-634-1692
Fax 66-2-634-1694
DENMARK
NETHERLANDS
UNITED KINGDOM
Box 211
201 22 Malmö
Sweden
Phone 46-40-611-13-60
Fax 46-40-611-94-15
Jules Verneweg 75
5015 BG Tilburg
Netherlands
Phone 31-13-58-35-400
Fax 31-13-58-35-499
52 Milford Road
Reading, Berkshire RG1 8LJ
United Kingdom
Phone 44-118-958-8386
Fax 44-118-955-0925
FRANCE
NORWAY
UNITED STATES
Rue Benoît Fourneyron Z.I. Sud
Boîte Postale 31
42161 Andrezieux Cedex
France
Phone 33-4-77-36-56-56
Fax 33-4-77-55-37-89
Postboks 148
1366 Lysaker
Norway
Phone 47-67-53-12-00
Fax 47-67-12-42-68
34600 Solon Road
Solon, Ohio 44139
U.S.A.
Phone 1-440-248-0100
Fax 1-440-248-0723
Copyright ©2005 ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
E515C-EN
E1686CT06EN
0127M6