SECURITY〈SENSOR〉
TWIN MIRROR PASSIVE INFRARED SENSOR
PA-6612E (WIDE ANGLE PROTECTION : 40' (12m))
N1702
JAPAN (PATENT : 1) / U.S (PATENT : 1) / U.K (PATENT : 1)
GERMANY (PATENT : 1) / FRANCE (PATENT : 1) REGISTERED
Enhanced false alarm reduction due to small
animals by our patented unique twin optical system.
TWIN MIRROR OPTICAL SYSTEM
HIGH STABILITY
The unique combination of a pair of optical units (twin mirror and two
twin pyro) yields original protection area, by which the discriminating
capability between human body and small animals is increased. This
results in drastical reduction of false alarms due to small animals. (The
current Quad PIR usually has the weak point, that the discriminating
capability varies depending on the protection distance.)
PA-6612E has overcome this weak point by the newly developed twin
mirror technology, which enables non-linear control of zone disposition
depending on the protection distance, in addition to the object size
discriminating capability similar to the current Quad PIR.
Signal processing by the original CPU.
Excellent R.F.I. and noise immunity.
Good protection against insect intrusion.
SENSITIVITY SELECTABLE
Sensitivity is adjustable by 4 steps : 60%, 80%, 100％, 120％.
PULSE COUNT SELECTABLE
Mode selector allows setting for 1, 2, 3 or 4 triggers to initiate an alarm
output to suit its application.
ALARM CONTACT SELECTABLE
Mode selector allows N.O. or N.C. contact to be selected.
REMOTE LED CONTROL
Alarm LED can be disabled by external contact switch.
AUTO ALARM MEMORY
NOT DETECTED
DETECTED
EASY INSTALLATION
The sensor unit can be snapped into and out of the base unit.
One touch operation eases installation in high places.
SILENT RELAY
Photo-mos relay adopted at alarm output. Completely noiseless by
eliminating the movable part which is inside of the relay.
Alarm memory can be auto-reset or disabled by mode selector.
OTHER FEATURES
Distinguishable operation LED.
Alarm LED : Red, Memory LED : Yellow
Wall/Ceiling mountable with optional attachment BCW-401.
TWIN MIRROR PASSIVE INFRARED SENSOR
■COVERAGE AND RANGE
■EXTERNAL DIMENSIONS
0.31"(8mm)
Base unit
2.17" (55mm)
φ4.72" (φ120mm)
● Top
view
Sensor unit
φ3.88" (φ98.5mm)
Protection
φ3.29" (φ83.5mm)
84°
2.63" (66.7mm)
φ0.35"
(φ9mm)
30
35
゜
0.41"
(10.5mm)
1.34"
(34mm)
Wire hole
゜
35
Locking screw hole
view
Variable range
（6.5°
∼26°）
6.5°
● Wall mount attachment〈BCW-401〉
■TERMINAL ARRANGEMENT
Coverage
Sensitive zone
Supply voltage
Current consumption
Alarm signal
Alarm memory
L/C
LED
Control
Alarm LED
Memory LED
Power (non-polarity)
10.5∼28V DC
25mA or less
(+2mA at L/C use)
※ The power supply used with this unit
must have a minimum 4 hours standby power capbillity.
Alarm output
Dry contact (Semi-Conductor)
N.C./N.O. selectable
Reset : approx. 2 sec.
24V (AC/DC) 0.25A
(Protective resistor 3.3Ω)
● Wall mount attachment〈BL-5000〉
■SPECIFICATIONS
Product name
Model
Detection system
Tamper
N.C.
30V(AC/DC)
0.25A
m
)
6.5' (2m)
1.6' (0.5m)
3.2' (1m)
°
40'
(12m)
20'
(6m)
35゜
0.
17
"(
4.
2m
■OPTIONAL
4.9' (1.5m)
52
0
35゜
5- φ0.17"
(5- φ4.2mm)
Release lever
8.5'
(2.6m)
19.5
°
● Side
R0.59"
(R15mm)
Adjustment
Count changeover
Fine motion detection
Ambient temperature range
Mounting position
Wiring connection
Weight
Appearance
Accessory
TWIN MIRROR PASSIVE INFRARED SENSOR
PA-6612E
Passive infrared
Wide angle
40'（12m）Max.
17 pairs（64）
10.5∼28V DC（non-polarity）
25mA Max.
（＋2mA at L/C use）
Dry contact（Semi-Conductor）
（N.C./N.O. selectable）
Reset : Approx. 2 sec., 24V（AC/DC）0.25A
（protective resistance 3.3Ω）
3 minutes flashing, 47 minutes lighting and
automatically reset
Red : Flashing at warming up
Lighting at alarm（LED disabled）
Yellow : Flashing at memory activated
Lighting at memory indication
Vertically 19.5°
, Horizontally 25°
（on mounting hole of base）
1 / 2 / 3 / 4 selectable
Slight movements of human beings can be detected
+5°
F to +131°
F（-15°
C to +55°
C）without condensation
Indoor ceiling（wall mount with optional attachment BCW-401）
Terminals on separate base unit
4.73oz（135g）
Body : ABS resin
Cover : PE resin
Tapping screw : 2 pcs. Sensor locking screw : 1 pce.
The specifications are subject to change without notice.
Please Note : This sensor is designed to detect intrusion and to initiate an alarm; it is not a burglary-preventing device. TAKEX is not
responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning),
abuse, misuse, abnormal usage, faulty installation or improper maintenance.
In Japan
In the U.S.
In Australia
Takenaka Engineering Co., Ltd.
83-1, Gojo-sotokan,
Higashino, Yamashina-ku,
Kyoto 607-8156, Japan
Tel : 81-75-501-6651
Fax : 81-75-593-3816
http://www.takex-eng.co.jp/
Takex America Inc.
3350, Montgomery Drive,
Santa Clara,
CA 95054, U.S.A.
Tel : 408-747-0100
Fax : 408-734-1100
http://www.takex.com
Takex America Inc.
Unit 16/35 Garden Road,
Clayton 3168 Victoria,
Australia
Tel : 03-9546-0533
Fax : 03-9547-9450
In the U.K.
Takex America Inc.
Brisbane office : 1/50 Logan
Road, Woolloongabba
Queensland
4102, Australia
Tel : 07-3891-3344
Fax : 07-3891-3355
Takex Europe Ltd.
Takex House, Aviary Court,
Wade Road, Basingstoke,
Hampshire, RG24 8PE, U.K.
Tel （
: +44）01256-475555
Fax （
: +44）01256-466268
http://www.takexeurope.com
LEAF 10-04P14-6