CABLE
MANAGEMENT
Hubbell Premise Wiring offers one of the industry’s
most complete cable management and enclosure product lines. Our cable management family is designed by
Hubbell engineers and built to exacting Hubbell specifications to provide you with the best value and the highest level of quality.
Our NEXTFRAME™ Cable Management system is a
family of racks, runway, organizers and accessories.
NEXTFRAME™ includes all the accessories required
to route, organize, and identify cable, jumpers, and
patch panels.
Hubbell’s family of enclosures addresses a wide variety
of data communications applications for the telecommunications room and data center. Our enclosures
range from small flush mount boxes to full size seismic
cabinets.
Two product families, one complete solution.
B2
CABLE MANAGEMENT PRODUCTS
Description
NEXTFRAME™
Page
Equipment Racks ............................................ B4
Vertical Cable Management ............................ B6
Horizontal Cable Management ........................ B8
Cable Management Accessories .................... B10
Ladder Rack System ...................................... B12
Center Rack System........................................ B14
Wall Mount Products
Wall Mount Racks and Accessories ................ B16
Wall Mount Hinged Brackets .......................... B17
Wall Mount Cabinets and Accessories ............ B18
REBOX™ - Remote Equipment Cabinet ........ B20
IDF Cabinet - Remote Equipment Cabinet...... B21
Remote Equipment Cabinet Accessories ........ B22
Consolidation Point Enclosure ........................ B23
Cabinets
Premise Networking Cabinets ........................ B24
Server Cabinets .............................................. B26
Seismic Cabinets ............................................ B28
Premise Networking and Seismic .................. B29
Cabinet Accessories
Server Cabinet Accessories ............................ B30
Cabinet Accessories ........................................ B30
Call 1-800-626-0005
www.hubbell-premise.com
B3
™
▼
▼
Equipment Racks
By far the best value, the
NEXTFRAME™ Equipment
Rack is the cornerstone of
our NEXTFRAME™ Cable
Management System.
NEXTFRAME™ Equipment
Racks are available individually or boxed together with
NEXTFRAME™ Vertical
Cable Organizers in an
easy-to-order, complete
cable management equipment rack.
▼
▼
Two top angles for superior
strength and rigidity
SPECIFICATIONS
◆ Material: 6063-T2 aluminum
1/4” web thickness
Multiple tie-off points to
organize cable along full
height of channel
Universal hole
pattern on rack
uprights mates
with other makes
and models of
racks and
channels
◆ Finish: Durable black powder
coat or mill finish
◆ Weight capacity: 500 lbs.
(static) when properly
secured to floor
◆ UL Listed - 7N69
Communications Circuit
Accessory
Two-piece ‘Z’ construction survives shipment,
easier to install
◆ EIA-310-D universal spacing
tapped #12-24 front and rear
◆ Includes 20 #12-24 x 5/8”
equipment mounting screws
Front covers provide
attractive appearance
SteadFast™ Gates
• Can be located as
required along channel to
best suit application
• Secure to channel during
maintenance
Rack mounting rails
tapped after powder
coating to ensure
paint-free threads
Wide, sturdy base
Combo
h
#3 Phill ead with
ip
dog-no s and
sed tip
make th
screws
es
e
standa asier to use th e
rd mac
hine sc an
rews
5/8” mounting hole
B4
Look fo
r the sc
re
“HPW”
stampe w with
d on th
e
head
▼
▼
ORDER INFORMATION
19” Equipment Rack with 6” wide ‘Z’ Channels
Seven-foot cable management rack with 6” wide vertical cable management organizers in a
single catalog number for ease in ordering. Use when maximum cable volume is required.
Products are available in both black and clear aluminum finishes. Rack ships unassembled.
Delivery:
2 Floor angles
32 Gates
2 Vertical uprights
4 Covers
2 Top angles
1 kit Assembly hardware
4 “Z” channels - 6”W x 38.5”H 20 #12-24 x 5/8” equipment mounting screws
Rack
Rack
Height
Units
Finish
Catalog No.
7’ (2134)
45
Black
7’ (2134)
45
Aluminum
CR1976
CR1976A
19” Equipment Rack with 3¼” wide ‘C’ Channels
Seven-foot cable management rack with 3.25” wide vertical cable management organizers in a
single catalog number for ease in ordering. Use when space is limited. Products are available in
both black and aluminum finishes. Rack ships unassembled.
Delivery: 2 Floor angles
16 Gates
2 Vertical uprights
1 kit Assembly hardware
2 Top angles
20 #12-24 x 5/8” equipment mounting screws
4 ‘C’ channels - 3.25”W x 38.5”H
Rack
Rack
Height
Units
Finish
Catalog No.
CR1976A
7’ (2134)
45
Black
7’ (2134)
45
Aluminum
CR1973
CR1973A
CR1973A
Equipment Rack
19” rack shipped unassembled.
Delivery:
2 Floor angles
2 Vertical uprights
1 Assembly hardware kit
Rack
Rack
Mounting
Height
Units
Width
HPW84RR19
HPW84RR19ML
2
20
Top angles
#12-24 x 5/8” equipment mounting screws
Finish
Catalog No.
4’ (1219)
24
19” (483)
Black
4’ (1219)
24
19” (483)
Aluminum
4’ (1219)
24
23” (584)
Black
4’ (1219)
24
23” (584)
Aluminum
5.5’ (1676)
36
19” (483)
Black
HPW48RR19
HPW48RR19ML
HPW48RR23
HPW48RR23ML
HPW66RR19
HPW66RR19ML
HPW84RR19
HPW84RR19ML
HPW84RR23
HPW84RR23ML
HPW90RR19
HPW90RR19ML
HPW90RR23
HPW96RR19
HPW96RR19ML
HPW96RR23
HPW96RR23ML
5.5’ (1676)
36
19” (483)
Aluminum
7’ (2134)
45
19” (483)
Black
7’ (2134)
45
19” (483)
Aluminum
7’ (2134)
45
23” (584)
Black
7’ (2134)
45
23” (584)
Aluminum
7.5’ (2286)
48
19” (483)
Black
7.5’ (2286)
48
19” (483)
Aluminum
7.5’ (2286)
48
23” (584)
Black
8’ (2438)
52
19” (483)
Black
8’ (2438)
52
19” (483)
Aluminum
8’ (2438)
52
23” (584)
Black
8’ (2438)
52
23” (584)
Aluminum
See pages B6-B7 for Channel ordering information and B9 for label kit.
Call 1-800-626-0005
www.hubbell-premise.com
B5
▼
▼
Vertical Cable
Management
NEXTFRAME™ Vertical Cable Channels
are the most durable and easy-to-use
channels ever developed.
Hubbell’s innovative design incorporates
many patent-pending, labor-saving features that speed assembly and simplify
maintenance. Unparalleled durability
ensures long-lasting reliability.
Most important, NEXTFRAME™ Vertical
Cable Channels protect cable by eliminating
cold flow and maintaining the proper bend
radius of cables entering and exiting the
organizer ensuring maximum cable transmission performance.
▼
▼
™
SPECIFICATIONS
◆ Channel material: 14 ga cold-rolled steel
◆ Cover material: 16 ga cold-rolled steel
◆ Finish: Durable black or aluminum
color powder coat finish
◆ Packaged to meet Telcordia™
GR-63-CORE transportation requirements
Rugged Z-Frame
Construction withstands rigors of the job
site and years of use
(6” and 4.5” wide
organizers)
Universal Mounting Hole Pattern on
channel allows fastening to racks of
other makes and models
Assembles Quickly
Channel clips to equipment rack
SteadFast™ Gates feature rolled edges ensuring
proper bend radius and eliminate pinching and
chafing of cable
• Gates can be located as needed along the
length of the channel for proper cable routing
• Organize cable by groups and bundles by tying
to channel using any of the many tie-off points
along the entire length
Economic ‘C’ Frame
organizer for 3.25”
Pass-thru Holes permit cable
routing from the front to the rear
of the rack when required
B6
Front Covers
• Conceal cable to
provide clean appearance
• Snap in place - no fasteners
to wear or break
▼
▼
ORDER INFORMATION
Vertical Organizer - 3.25” wide ‘C’ Channel
Vertical Organizer - 6” wide ‘Z’ Channel
Our most popular solution, the 6” wide ‘Z’ channel provides ample
cable capacity for a fully utilized 7’ or 8’ rack. Suitable for approximately 800 4-pair UTP cables when fully utilized.
‘Z’ Channel with Cover
For Rack
Catalog No.
Height
Black
7’ (2134)
8’ (2438)
VC76
VC86
‘Z’ Channel only
For Rack
Catalog No.
Height
Black
4’ (1219)
VC46
‘C’ Channel only
For Rack
Catalog No.
Height
Black
Catalog No.
Aluminum
7’ (2134)
VC76A
VC86A
4’ (1219)
2
VC46A
8
2
‘Z’ Channel only
‘Delivery
1
Z channel, 38.5”H x 6”W
8
Gates
1
1/2”-13x1” Bolt w/nut and lock washer
4’ (1219)
VC74
VC44
VC73
ACCESSORIES
Cover
Delivery: 1 Cover, 38.5”H
Cover
Catalog No.
Width
Black
6”
VCC6*
4”
VCC4*
3”
VCC3*
* Add suffix ‘L’ for 45.38”H
Catalog No.
Aluminum
Delivery: 1 kit of 16 gates
Gate
Catalog No.
Width
Black
6”
VCG6
4”
VCG4
3”
VCG3
Delivery: VC74(A)
2 Z channels, 38.5”H x 4.5” W x 10.5”D
16 Gates
2 1/2”-13x1” bolt, nut, washer
VC44
Call 1-800-626-0005
Catalog No.
Aluminum
VCC6A*
VCC4A*
VCC3A*
cover.
Gates
VC74A
VC44A
Delivery: VC44(A)
1 Z channel, 38.5”H x 4.5”W x 10.5”D
8 Gates
1 1/2”-13x1” bolt, nut, washer
C channels, 38.5”H x 3.25” W x
10.5”D*
Gates
1/2”-13x1” bolt, nut, washer
* When optional rear gates are used.
Vertical Organizer - 4.5” wide ‘Z’ Channel
7’ (2134)
VC73A
VC43A
Delivery: VC43(A)
1 C channel, 38.5”H x 3.25”W x 10.5”D*
4 Gates
1 1/2”-13x1” bolt, nut, washer
Our 4.5” wide vertical ‘Z’ channels deliver all the features of our popular 6” wide ‘Z’ channels in a compact package. Suitable for approximately 540 4-pair UTP cables when fully utilized.
‘Z’ Channel only
For Rack
Catalog No.
Height
Black
VC73
VC43
Catalog No.
Aluminum
Delivery: VC73(A)
Catalog No.
Aluminum
‘Z’ Channel with Cover
Delivery: V76(A)
2
Z channels, 38.5”H x 6”W x 10.5”D
2
38.5” x 6” Covers
16 Gates
2
1/2”-13x1” Bolt w/nut and lock washer
Delivery: V86(A)
1
Z channel lower, 45.38”H x 6”W
1
Z channel upper, 38.5”H x 6”W
1
Cover 38.5”H x 6”W
1
Cover 45.38”H x 6”W
16 Gates
2
1/2”-13x1” Bolt w/nut and lock washer
VC76 (1 section)
This economical, space-saving solution is ideal for applications with
light cable requirements. Suitable for approximately 300 4-pair UTP
cables.
Catalog No.
Aluminum
VCG6A
VCG4A
VCG3A
Joining Kit
VCC6
Used to join top and bottom channel sections when mounting other makes and
models of racks, or used to join racks
side-to-side.
Delivery: 1 Joining plate
4 #12-24 x 5/8 screws,
nuts, washers
4 1/2”-13 bolts, nuts,
washers
Catalog No.
VCJK
www.hubbell-premise.com
B7
▼
▼
Horizontal Cable
Management
▼
▼
™
◆ Panel material: 16 ga cold-rolled steel
NEXTFRAME™ relies solely on steel construction - no plastic parts to wear or break.
The flexibility of this system allows for
upgrades as your cross connect needs
change.
The NEXTFRAME™ horizontal cable
management system provides the most
durable and versatile organized solution
for the cross connect.
NEXTFRAME™ snap fits are secure,
rugged and reliable. NEXTFRAME™
horizontal organizers are available both
as pre-configured, ready to use items or
modular, snap together components
allowing an installer to configure panels
to unique applications.
The assemble-to-order nature of
NEXTFRAME™ also means that you pay only
for the features you need as you need them.
All steel construction - Rugged, non-flammable, no fasteners to
wear or break, no fingers to fuss with
SPECIFICATIONS
◆ Heavy-duty version: 14 ga cold-rolled steel
◆ Ring: 0.225” diameter steel rod
◆ Cover material: 16 ga cold-rolled steel
◆ Finish: Durable black powder coat
◆ Packaged to meet Telcordia™
GR-63-CORE transportation requirements
◆ Each panel comes complete with #12-24
mounting hardware
Rear Cable Organizer
- Organizes horizontal cable
terminated on rear of patch panel
- Clips on to rear of Enhanced and
Duct style panels without using tools
Steel Rod Rings
0.225” diameter - much more
rugged than rings, stamped from
sheet metal or made from plastic
Cable Management Panel
- Basic version: 4-ring
- Enhanced version: 7-ring
- Duct version: 7-ring
Generous space between
fingers alleviates congestion
and pinching of patch cords
Cable-Friendly
round profile of rings
Pass-thru Holes
Front to rear, have rolled edges
to prevent chafing and eliminate
grommet
Transition Spool
- Manages cable into vertical
organizer
- Maintains T568-A compliant
bend radius as cable
transitions from horizontal
to vertical
Vertical Rings
- For use in smaller
installations in place of
vertical channel
- Only for use on front of panel
B8
Hinged cover
- Snaps open and closed
- No fasteners to lose or break
- Easily removed and replaced during
moves, adds and changes
- Conceals patch cords
- Enhances the look of any installation
- For use on the front and/or rear
Hint:
The ra
ck
B4 illus on page
tra
NEXTF tes
R
horizon AME
ta
manag l cable
ement
panels
in use.
▼
▼
ORDER INFORMATION
Enhanced Panels
■
■
■
7-rings
6 pass-through holes
These panels can be upgraded through
the use of accessories
Rack
Width
Rack
Units
Dimensions
Panel
Height
Ring
Depth
19”
1U
1.75”
3.50”
19”
1U
1.75”
6.00”
19”
2U
3.50”
3.50”
19”
2U
3.50”
6.00”
19”
3U
5.25”
3.50”
19”
3U
5.25”
6.00”
Rack
Width
Rack
Units
19”
1U
1.75”
1.75”
19”
1U
1.75”
3.50”
-
19”
19”
1U
1U
1.75”
1.75”
3.50”
6.00”
6.00”
-
19”
2U
3.50”
1.75”
-
19”
2U
3.50”
3.50”
-
19”
2U
3.50”
3.50”
6.00”
19”
2U
3.50”
6.00”
-
HC219CE3N
- front only
19”
2U
3.50”
3.50”
4.6”
HC219CC3N
- front and rear
19”
2U
3.50”
3.50”
4.6”
19”
3U
5.25”
3.50”
-
19”
3U
5.25”
6.00”
-
HC219ME3N
Catalog No.
HC119ME3N
HC119ME6N
HC219ME3N
HC219ME6N
HC319ME3N
HC319ME6N
Duct Panels
■
■
■
■
7-rings
6 pass-through holes
Hinged front cover
Conceals patch cords and enhances the
network appearance
■
■
-
Catalog No.
HC119CE1N
HC119CE3H*
HC119GC36***
HC119CE6H*
HC219CE1N
HC219CE3N
HC219GC36***
HC219CE6N
HC219CR3N**
HC219CC3N***
HC319CE3N
HC319CE6N
* Heavy-duty version - no pass-through holes
** Includes rear wire frame
*** Includes rear wire frame and rear cover
Basic Panels
■
Dimensions Front Rear
Panel
Ring Ring
Height
Depth Depth
4-rings
Solid panel
Use when accessories or pass-thru holes
are not required
HC219MS1N
Rack
Width
Rack
Units
Dimensions
Panel
Height
Ring
Depth
19”
1U
1.75”
1.75”
19”
1U
1.75”
3.50”
19”
2U
3.50”
1.75”
19”
2U
3.50”
3.50”
23”
2U
3.50”
1.75”
Catalog No.
HC119MS1N
HC119MS3N
HC219MS1N
HC219MS3N
HC223MS1N
Accessories
HC219C
Front/Rear Cover
Includes: 1 cover
Height
Catalog No.
1U/1.75”
HC119C
2U/3.50”
HC219C
3U/5.25”
HC319C
Call 1-800-626-0005
HC23VR
Vertical Rings
Mounts to 2U and 3U panels only.
Can be mounted directly to rack if
desired. Includes: 2 vertical rings
Depth
Catalog No.
3.50” (89)
HC23VR
6” (152)
HC26VR
HCSPL310
HC33WF
Rear Wire Frame
Mounts to 2U and 3U panels only.
Includes: 1 rear wire frame
Depth
Catalog No.
4.6” (117)
HC33WF
6” (152)
HC36WF
Transition Spool
Includes: 10 spools and
10 #12-24 HPW screws
Depth
Catalog No.
1.75”
HCSPL110
3.50”
HCSPL310
6.00”
HCSPL610
www.hubbell-premise.com
B9
▼
▼
Cable Management
Accessories
Vertical Management Rings
Individual rings attach to front and rear 19” holes on rack to provide
front/rear vertical cable management.
Material/Finish: Steel, black powder coat
Delivery: 2 vertical management rings and 1 mounting hardware kit
The Hubbell NEXTFRAME™
Cable Management system
also includes a full complement of accessories to complete any installation.
Our Cable Management
accessories are designed to
eliminate cable stress and
manage cords in a neat and
well organized manner as
defined by TIA/EIA standards.
MCCVMR22
Width
Depth
Brackets
Catalog No.
6" (152)
10" (254)
One side
6" (152)
10" (254)
Both sides
MCCVMR2
MCCVMR22
Plastic Rings
MCCPSR4
For patch cord cable management.
Material: Black plastic
Delivery: 4 plastic rings
Height
Width
Description
Catalog No.
3.95” (100) 2.95” (75)
without adhesive backing MCCPSR4
3.95” (100) 2.95” (75)
with adhesive backing
MCCPSRA4
23” Extender Bracket
Allows user to modify a 19” panel to mount to a 23” rack. Brackets
occupy 2 rack units.
Material/Finish: Steel, black powder coat
Delivery: 2 brackets and 1 kit of mounting hardware
BREXTB235
MCCCWS19HD
Description
Catalog No.
For extending 19” to 23” mounting
BREXTB235
Equipment Shelves
MCCCS19
MCCCWS19
Material: 16 ga. cold-rolled steel
Finish: Durable black powder coat
Dimensions: 3.5”H (89) x 17”W (432) x see below for depth
Delivery: 1 shelf and 4 HPW screws
Description
Load Capacity Depth
Catalog No.
Center Weighted
75 lbs.
19” (483)
MCCCWS19
Cantilevered
50 lbs.
14” (356)
MCCCS19
Perforated
50 lbs.
14” (356)
MCCCS19P
Heavy Duty
200 lbs.
21” (533)
MCCCWS19HD
Heavy Duty
200 lbs.
21” (533)
MCCCWS19HDA*
* Finish = aluminum
19” Blank Filler Panels
MCCBP175
MCCBP350
MCCBP700
With rolled top and bottom edges.
Material: 0.090” aluminum
Finish: Black anodized
Delivery: 1 panel and 4 HPW screws
Height
Rack Units
1.75” (45)
1
3.50" (89)
2
7.00" (178)
4
Catalog No.
MCCBP175
MCCBP350
MCCBP700
Cable Managers with Wire Saddles
MCCMP2USAD
B10
Allows precise routing for individual patch cords. The wire saddles
rotate to prevent exceeding bend radius limits.
Material: 16 ga. cold rolled steel
Finish: Durable black powder coat
Delivery: 1 cable manager and 4 HPW screws
Height
Rack Units
Rings
Catalog No.
1.75” (45)
1
Metal
MCCMP1USAD*
3.50" (89)
2
Metal
MCCMP2USAD
* Does not include vertical cable management rings.
▼
▼
Reusable Cable Ties
These high-quality, reusable cable ties neatly route and
manage cable anywhere in the Hubbell NEXTFRAME™
cable management system. Three styles of reusable ties
are available: Basic, Screw-mount, and ONE-WRAP®.
One-Wrap®
version
Screw-mount
style
One-Wrap® Cable Tie
The ONE-WRAP® cable tie is a unique 1/2” wide back-to-back fastening
system that wraps around cable then back on itself.
Length
5” (127)
Color
See below
8” (203)
See below
120” (3048)
Insert 2-letter
BK = Black
BL = Blue
Straps per Max. Bundle
Puck
Diameter
10
1.4”
10
2.5”
See below Cut to length
code in blanks for colors:
OR = Orange
YL = Yellow
RD = Red
Catalog No. (10-pk)
HPWCVF _ _5
HPWCVF _ _ 8
HPWCVFBK120*
* 10’ Roll of 1” wide, black continuous lineal tape.
Screw Mount Style Cable Tie
Basic style
The Screw-mount style consists of 3/4” wide hook strap and loop strap fused
together with a buckle at one end. The buckle end of the strap also has a
through-hole reinforced with a steel grommet. Use this strap to organize
cable bundles along the 19” mounting rails in cabinets and racks.
Length
9"
9"
Color
black
Max. Bundle Diameter
2.5”
orange
2.5”
Catalog No. (10-pk)
MCCMV9BS10
MCCMV9OS10
Basic Style Cable Tie
The Basic style consists of 1-inch wide hook strap and a loop strap fused
together. Use to gather cable bundles up to 2.5” diameter.
Length
Color
22”
black
Max. Bundle Diameter
7.5”
9"
see below
2.5”
5"
see below
1.4”
Insert 2-letter code in blanks for colors:
BK = Black
BL = Blue
RD = Red
PK = Pink
Catalog No. (10-pk)
MCCMV22BK10
MCCMV9_ _10
MCCMV5_ _10
YL = Yellow
OR = Orange
▼
▼
Rack Label Kit
The Rack Label Kit includes 5 vertical,
adhesive-backed label strips measuring
27” in height and 1/2” width are for use
with Hubbell’s Equipment Rack (shown
on page B4) to define rack unit space.
The labels are clear with black lettering.
Call 1-800-626-0005
Label Kit
Description
Adhesive-backed label strip identifying rack
positions (Numbers from 1-75)
www.hubbell-premise.com
Catalog No.
RRLABEL
B11
™
Hubbell’s NEXTFRAME™
Ladder Rack features light,
rugged, tubular steel construction. The complete
NEXTFRAME Ladder Rack
family features a broad line
of accessories and fittings
needed for proper installation. NEXTFRAME Ladder
Rack is available in popular
gray and black to complement equipment in data centers.
Supports UTP or fiber cabling
Lightweight, strong 16ga
tubular steel construction
Supports horizontal/vertical and
overhead cable management
SPECIFICATIONS
▼
▼
▼
▼
Ladder Rack
◆ Material: 16 ga tubular steel
Mounts to floors, walls, ceilings,
equipment racks, and cabinets
◆ Finish: Durable black or
gray powder coat
◆ Stringer Dimensions:
0.375”W x 1.5”H
Modular system - easily configured for
new and existing cable routing
◆ Rung spacing: 9.5”
▼
▼
◆ 45 lbs/foot weight capacity
ORDER INFORMATION
Ladder Rack - Straight Section
Width
6” (152)
12” (305)
18” (457)
24” (610)
Catalog No. Black
6’ (1829) Length
HLS0606B
HLS0612B
HLS0618B
HLS0624B
Catalog No. Gray
6’ (1829) Length
Catalog No. Black
10’ (3048) Length
Catalog No. Gray
10’ (3048) Length
HLS0606G
HLS0612G
HLS0618G
HLS0624G
HLS1006B
HLS1012B
HLS1018B
HLS1024B
HLS1006G
HLS1012G
HLS1018G
HLS1024G
Please order straight sections in multiples of 10 pieces.
Ladder Rack - 90° Turns
Width
6” (152)
12” (305)
18” (457)
24” (610)
Inside Radius 90°
Catalog No.
HLI0690*
HLI1290*
HLI1890*
HLI2490*
* Add ‘B’ for Black, or ‘G’ for Gray
B12
Flat Turns 90°
Catalog No.
Outside Radius 90°
Catalog No.
HLF0690*
HLF1290*
HLF1890*
HLF2490*
HLO0690*
HLO1290*
HLO1890*
HLO2490*
▼
▼
ORDER INFORMATION (Delivery comprises all items shown in photo)
Mounting Kit to Relay Rack
Use to secure ladder rack to top of
19” or 23” equipment rack
Color
Depth
Catalog No.
Black
5.4”
HLMPK19
Wall Angle Support
Use to terminate ladder rack to wall
Color: Black
Width
Catalog No.
6-12” (152-305)
HLX0612
18” (457)
HLX1518
24” (610)
HLX24
Cable Retaining Fence Posts
Use along ladder stringers to maximize cable routing and management
Width
Color
Catalog No.
6” (152) Black
HLP06B
6” (152) Gray
HLP06G
8” (203) Black
HLP08B
8” (203) Gray
HLP08G
10” (254) Black
HLP10B
10” (254) Gray
HLP10G
T-Junction splice Kit
Use to connect one section of ladder perpendicular to another
Catalog No.
HLTK
Ceiling Mounting Kit
Use to hang ladder from ceiling.
Recommended spacing between
hangers is 5’.
Catalog No.
HLCMK
Triangle Wall Support
Use to run ladder rack along wall.
Recommended spacing: 5’.
Width
Catalog No.
6” (152)
HLTSB06*
12” (305)
HLTSB12*
18” (457)
HLTSB18*
24” (610)
HLTSB24*
* Add to Catalog No.: ‘B’ for Black,
or ‘G’ for gray
Cable Radius Drop
Assembled to stringers or rungs to
provide gradual transition for cable
Finish: Black powder coat
Ladder width
Catalog No.
6” (152)
HLCD06
12” (305)
HLCD12
18” (457)
HLCD18
Stringer
HLCDS
Foot Kit
Use to secure vertical ladder to floor
Finish: Black powder coat
Catalog No.
HLRF
Butt-Splice Kit
Use to splice two sections of ladder
end to end
Finish: Black powder coat
Catalog No.
HLBSK
Vertical Wall Bracket
Use to secure ladder rack vertically
to wall
Finish: Black powder coat
Catalog No.
HLVWBK
(Includes 6’ threaded rods - 2 pieces)
Protective End Caps
Use to dress ends of stringers and
cable posts. Black, Qty. 2
Catalog No.
HLECPK2
Call 1-800-626-0005
J-Bolt Kit
Use to secure ladder to brackets
Catalog No.
HLJB
www.hubbell-premise.com
B13
™
▼
▼
Center Rack
Hubbell’s NEXTFRAME™
Center Rack is an innovative
alternative to traditional ladder rack for routing cable
between cabinets, racks, and
closets along walls and suspended from ceilings.
The center stringer design
and aluminum construction
of NEXTFRAME™ Center
Rack cuts the number of fittings in half, drastically
reducing installation time.
Complete modular datacom runway system easily configured to meet the most demanding applications
Center stringer acts as
integrated barrier running
both data and power without additional accessories
Lightweight, aluminum
construction - arrives at
job site ready to use and
is easily cut to size
▼
▼
The Center Rack provides
optimum cable management.
Cable is easily loaded and
accessed from the sides.
The height of the rungs
delivers more cable-carrying
capacity than traditional ladder racks.
SPECIFICATIONS
Material: Mill Finish 6065-T6
aluminum
◆
CSA Certified, File #203139
◆
NEMA VE1 Load Class 12B
- 75 lb./ft @ 12 ft. span
▼
▼
◆
Reinforced heavy duty rungs, preassembled at factory with unique
four-point staking process, rugged
and durable for years of use - rungs
will not flex or bow under heavy loads
Maximum versatility with
horizontal and vertical
hinge splices
ORDER INFORMATION
Center Rack Straight Section
B14
Use Center Rack as an alternative to traditional ladder rack for demanding
complex/complicated applications or where
minimum installed cost is desired. Connect
Straight Lengths with fittings to achieve
desired configuration. Straight Lengths are 12
feet long and made from mill finish aluminum.
Sold in multiples of two for shipping purposes.
Delivery:
2 straight sections
2 splice/hangers
2 hardware kits
Load Width
Width
6"
7.5”
12"
13.5”
18"
18”
24"
24”
Catalog No.
HPWC1206PR
HPWC1212PR
HPWC1218PR
HPWC1224PR
▼
▼
ORDER INFORMATION
Splice Kit
Cable Radius Drop
Use Splices to join two straight lengths
in line.
Delivery Includes: 10 splices and
10 hardware kits
Catalog No.
Cross Splice Kit
Vertical Hinge Kit
HPWCSPK10
Use Cross Splices to intersect three
straight lengths at right angles to each
other.
Delivery Includes: 1 cross coupler, 1
bottom bracket, 1 hardware kit
Center Rack Width
Catalog No.
6"
12"
18"
24"
P
Use the Relay Rack Mounting Kit to
attach straight lengths to rack top
angles.
Delivery Includes: 1 rack mounting
bracket with assembly hardware
Catalog No.
Use the Wall Bracket to terminate
straight length to wall.
Delivery Includes: 10 wall brackets
and 10 hardware kits
6"
12"
18"
24"
Use Horizontal Hinges to join two
straight lengths at a variable left / right
angle.
Delivery Includes: 10 hinges and 10
installation kits
Catalog No.
Catalog No.
Use the Stabilizer Bar when suspending Center Rack from ceiling to support
uneven loading.
Delivery Includes: 1 stabilizer bar and
1 hardware kit
Catalog No.
Use to suspend straight lengths from
ceilings.
Delivery Includes: 10 support brackets
and 10 hardware kits
Catalog No.
Call 1-800-626-0005
HPWCHPK10
HPWCSB3
Triangle Wall Support
Use to support straight lengths along
wall.
Delivery Includes: 2 wall brackets
Center Rack
Width
Catalog No.
HPWCWSPR
HPWCWLPR
Ground Strap
Use 500A ground strap between
straight lengths to maintain electrical
connection.
Delivery Includes: 10 ground straps
and 10 installation kits
Length
Catalog No.
HPWCFPR
Ceiling Mounting Kit
HPWCHHPK10
Stabilizer Bar
6", 12"
18", 24"
Use to attach straight length to flat surface below center rack such as floor or
cabinet roof.
Delivery Includes: 2 floor support
brackets and assembly hardware
HPWCT06
HPWCT12
HPWCT18
HPWCT24
Horizontal Hinge Kit
HPWCXPK10
Floor Support Kit
HPWC56806
HPWC56812
HPWC56818
HPWC56824
Use T Splices to intersect two straight
lengths at right angles to each other.
Delivery: 1 Tee bracket, 1 Tee clip, 1
assembly hardware kit
Center Rack Width Catalog No.
HPWCRPR
Wall Bracket
Catalog No.
T-Splice Kit
HPWCVHPK10
Relay Rack Mounting
W T
NEDUC
O
R
6”
12”
18”
24”
HPWCX06
HPWCX12
HPWCX18
HPWCX24
Use Vertical Hinges to join two straight
lengths end-to-end at a variable up/
down angle.
Delivery Includes: 10 hinges, 10 installation kits
Catalog No.
Assembles to rungs to provide a gradual transition for UTP or fiber optic
cable.
Delivery Includes: 1 cable drop and 1
hardware kit
Center Rack Width Catalog No.
12"
HPWCGPK10
Description
Catalog No.
10 - 1/2” dia.
flat washers
10 - 1/2” dia.
hex nuts
HPWCFW10
Additional Hardware
Use additional hardware as required.
Description
Catalog No.
1/2” dia. x 6’
threaded rod
10 - 1/2” dia.
lock washers
HPWCTRK
HPWCLW10
www.hubbell-premise.com
HPWCHN10
B15
Wall Mount Racks
and Accessories
MCCSGBK
▼
▼
Hubbell’s Wall Mount Racks are used to
conserve floor space when a full-height
floor standing rack is not required.
▼
▼
Wall Mount Racks are designed to hold
heavy equipment in controlled rooms
where open access to equipment is
required.
FEATURES
Swing Rack
Supports heavy or deep equipment in
locations with limited floor space
■
16” mounting for easy attachment
to standard wall studs
■
Cable tie slots along both sides and
inside top and bottom
■
Rails tapped #12-24 front and back
■
Quick release latches - unit hinges both
left and right
■
3” channel accepts most Telecom rack
accessories
■
Available in 3 heights
Wall Mount Frame
■
■
Swing bracket offers 180° rotation and
multiple locking positions
Right or left hand hinging promotes easy
access to equipment
▼
▼
■
Designed for shallow applications
where depth is limited or for existing
construction without a dedicated space
for a telecom room
MCC36WMR19
(shown with MCCSGBK
mounting brackets)
HPWWMR48
▼
▼
■
ORDER INFORMATION
19” Wall Mount Swing Rack
Delivery:
1 Rack frame, 1 kit mounting hardware
Height
Rack Units
Width
Depth
Finish
Catalog No.
24” (610)
12
20.7” (526)
18” (457)
Black
HPWWMR24
24” (610)
12
20.7” (526)
21” (533)
Black
HPWWMR24D
36” (914)
18
20.7” (526)
18” (457)
Black
HPWWMR36
36” (914)
18
20.7” (526)
21” (533)
Black
HPWWMR36D
48” (1219)
25
20.7" (526)
18" (457)
Black
HPWWMR48
48” (1219)
25
20.7" (526)
21” (533)
Black
HPWWMR48D
SPECIFICATIONS
Swing Rack (HPWWMR series)
◆ 12 ga. steel construction
19” Wall Mount Frame
Delivery:
1 Rack frame, 1 kit mounting hardware
◆ 100 lbs. load capacity
Height
Rack Units
Finish
Catalog No.
◆ Completely assembled
36” (914)
18
19” (483)
Black
MCC36WMR19
48” (1219)
24
19” (483)
Black
MCC48WMR19
◆ 19” rack-style rails tapped #12-24
Wall Mount Frame (MCC*WMR series)
◆ Extruded aluminum - 0.188” wall
thickness
◆ 100 lbs. load capacity when using
Stationary Brackets
◆ 75 lbs. load capacity when using
Swing Gate Brackets
◆ 19” rack-style rails tapped #12-24
B16
Width
Bracket must be ordered separately, see below.
Mounting Brackets for Wall Mount Frame
Delivery:
Stationary Bracket: 4 brackets, 1 kit mounting hardware
Swing Gate Bracket: 2 brackets, 1 kit mounting hardware
Description
Stationary Bracket Kit
Swing Gate Bracket Kit
Depth
21”
15”
Catalog No.
MCCSWB
MCCSGBK
Wall Mount
Hinged Brackets
▼
▼
Hubbell offers 2 different styles of hinged
brackets - bottom and side hinged. The
Wall Mount Brackets are ideal for mounting 19” panels and small hubs in the traditional telephone room.
Bottom-hinge
Brackets
HPWWB6U4
▼
▼
Wall Mounting holes are spaced 16”
apart for easy stud mounting. Use these
brackets with our family of 19” patch
panels and NEXTFRAME™ horizontal
cable management.
FEATURES
Rugged design - bottom-hinged folds
down to allow termination on rear side
of patch panels
Jumbo cable openings in sides and rear
■
Enhanced cable management - multiple
tie-off points for both nylon and
Velcro® ties
■
Accommodates service loop for fiber
■
Bottom-hinging uses less space to open
■
Side-hinging provides complete access
to the rear of components
▼
▼
■
SPECIFICATIONS
◆
16 ga. steel construction
◆
Finish: durable black powder coat
◆
Wall mount holes on 16” centers
◆
EIA-310-D universal spacing tapped
#12-24
◆
Width: 19”
NOTE:
Yo
make y u can
our ow
n
front ac
cess p
anel:
- Botto
m hing
e
bracke
t
- Patch (above)
p
- Cable anel (A30)
Manag
ement A
ccesso
ries
(B10)
- Patch
cords (A
26)
Call 1-800-626-0005
HPWWB2U8
HPWWB1U4
BRMCCMB19X35X4
Side-hinge
Bracket
▼
▼
■
HPWWB4U8
ORDER INFORMATION
Bottom-Hinged Wall Mount Brackets
Delivery: 1 bottom-hinged wall bracket, completely assembled
Rack
Units
Height
Depth
Catalog No.
1
1.75" (45)
4" (102)
HPWWB1U4
1
2
2
4
4
6
6
6
1.75" (45)
3.50" (89)
3.50" (89)
7.00" (178)
7.00" (178)
10.50" (267)
10.50" (267)
10.50" (267)
8"
4"
8"
4"
8"
4"
8"
18"
(203)
(102)
(203)
(102)
(203)
(102)
(203)
(457)
HPWWB1U8
HPWWB2U4
HPWWB2U8
HPWWB4U4
HPWWB4U8
HPWWB6U4
HPWWB6U8
HPWWB6U18
Side-Hinged Wall Mount Brackets
Delivery: 1 side-hinged wall bracket, completely assembled.
Rack
Units
Height
Depth
Catalog No.
2
3.50" (89)
4" (102)
BRMCCMB19X35X4
4
7.00" (178)
4" (102)
BRMCCMB19X7X4
2
3.50" (89)
8" (203)
BRMCCMB19X35X8
4
7.00" (178)
8" (203)
BRMCCMB19X7X8
www.hubbell-premise.com
B17
▼
▼
™
Remote Equipment
Cabinet
The REBOX™ and IDF cabinets are specifically designed for housing remote and network equipment.
Both the REBOX™ and IDF cabinets
exceed the stringent requirements of UL
and Telcordia™ enclosure standards. The
resulting safe and secure environment surpasses the industry for protecting communications equipment in locations such as
classrooms, warehouses, and retail outlets.
Use the REBOX™ as a small remote data
center. Each cabinet includes dedicated
mounting for hubs and other active equipment and another dedicated mounting area
for patch panels.
▼
▼
Use the IDF cabinets in applications such
as horizontal cross connects or the telecommunications room. The modular design of
the IDF cabinet is very versatile, allowing
the installer to configure the cabinet with a
wide variety of accessories to mount any
type of components.
SPECIFICATIONS
◆ 16 gauge CRS welded construction
◆ Designed specifically for hostile
environments:
- Tamper resistant per Telcordia™
GR-487-CORE
- Ventilation pattern developed to
comply with UL 1950
- Designed to meet NEMA 2
◆ Durable powder coat finish
◆ 2 sets of universal mounting rails with
#12-24 tapped holes 5/8”, 5/8”, 1/2”
EIA standard pattern
◆ Load capacity: 100 lbs.
◆ Accepts maximum hub depth of 14.5”
(RE2 and RE4) or 22” (RE4X)
◆ Abundant cable entry through sides,
bottom, and top - compatible with
major raceway and popular conduit
sizes
◆ Designed to dissipate 160W - industry
maximum without fan
◆ Weight: RE4 = 50.6 lbs.;
RE2 = 45.1 lbs.
◆ Usable rack space:
19” Hubs
RE2 = 2
RE4 = 5
Patch Panels
RE2 = 2
RE4 = 4
B20
Cable entry
knockouts for
conduit sizes
from 1/2” to 1.5”
Unique knockout
for metal and PVC
raceway
Accepts Hubbell
multimedia panels
and housings
accommodating
fiber, S-Video and
others
Mounting for 19”
patch panel hinges
down for front
access termination
Knife-edge design
and sloped door
resists dust, water,
and vandalism
Flexible mounting
for active equipment
including hubs and
UPSs
Door lifts off when
open for easy
installation
Door hinge easily
reversed in the field
UL1950-compliant bottom
ventilation - engineered
airflow to prolong the life of
active equipment
Easily expanded in the
field to support future
growth
RE2 fully loaded
Pre-configured, surgeprotected power and fan
Durable powder coat
finish protects equipment
in isolated locations
▼
▼
ORDER INFORMATION
REBOX™ - Remote Equipment Cabinet
Delivery:
RE4XB
1
1
1
1
base/rear section with welded 19” brackets for 2 hubs
front door with 2 locks (NSQ tool)
set 19” extension brackets for 2 additional hubs (RE4 only)
set 19” bottom hinge brackets for patch panels
Capacity
2 hubs
2 hubs
4 hubs
Max.
Hub Depth
14” (356)
14” (356)
14” (356)
Height
32.0” (818)
32.0” (818)
32.0” (818)
Width
24.2” (615)
24.2” (615)
24.2” (615)
Depth
7” (178)
7” (178)
10” (254)
Color
Light gray
Black
Light gray
4 hubs
4 hubs
4 hubs
14” (356)
22” (559)
22” (559)
32.0” (818)
42.0” (1067)
42.0” (1067)
24.2” (615)
24.2” (615)
24.2” (615)
10” (254)
10” (254)
10” (254)
Black
Light gray
Black
IDF Cabinet
Same durable construction as REBOX™, except mounting rails are not included, providing for flexibility to
configure your requirements. Configure by selecting accessories from Pages B21 and B22 to house a wide
range of datacom equipment.
Delivery:
1 base/rear section
1 front door with 2 locks (NSQ tool)
Height
24” (600)
32” (813)
42” (1067)
Width
24.2” (615)
24.2” (615)
24.2” (615)
Economy Power Kit
REKP
REKPE
Catalog No.
RE2
RE2B
RE4
RE4B
RE4X
RE4XB
Brings surge-protected power to
active components
Catalog No.
REKP
Delivery:
1 Hubbell surge-protected duplex
receptacle with audible alarm
(HBL5262IS)
1 single-gang work box
6’ Hubbell Polytuff® flexible
non-metallic conduit
1 Stainless steel face plate
1 Assembly hardware kit and
fittings
Catalog No.
REKPE
Delivery:
1 Hubbell surge-protected duplex
receptacle with audible alarm
(HBL5262IS)
1 Economy REBOX single-gang
work box
Key Lock Kit
Replace NSQ locks (supplied
with cabinet) with key locks
Delivery:
2 REBOX key locks with keys
Catalog No.
REKL
Depth
10” (254)
10” (254)
10” (254)
Color
Light Gray
Light Gray
Light Gray
Catalog No.
IDF24
IDF32
IDF42
Fan Kit
Increases ventilation. Order 1 per
RE2, 2 per RE4, RE4X, IDF
Delivery:
1 106CFM fan
1 2’ line cord
1 Hubbell Valise™ 2-prong plug
1 kit assembly hardware
Catalog No.
REKF
Fan Filter Kit
Dust filter for air intake when
using fans (for RE4, RE4X, IDF
only)
Delivery:
1 mounting bracket
2 foam filters
1 assembly hardware kit
Catalog No.
REKFF
Gasket Kit
Enhances protection against dust
and water, and performance of
fan kit
Delivery:
1 10’ roll adhesive-backed gasket
Catalog No.
REKG
Padlock Hasp Kit
Allows user to secure cabinet
with padlock
Delivery:
2 padlock hasps
1 kit assembly hardware
Catalog No.
REKH
Call 1-800-626-0005
See next page for more accessories
www.hubbell-premise.com
B21
▼
▼
ORDER INFORMATION
Conversion Kit
Filler Panel 2U
Converts an RE2 to an RE4 for
added space
Delivery:
1 RE4 door
2 hub mounting expansion brackets
Color
Catalog No.
Light gray
REKU
Black
REKUB
Use as shelf in REBOX.
Delivery:
1 filler panel 2U
1 kit mounting hardware
Catalog No.
MCCBP350
Joining Kits
REKTJ
REKSJ20
Join REBOX™ and IDF cabinets
side-by-side or top-to-bottom
Delivery:
1 shroud, 16 ga cold rolled steel
1 mounting hardware kit
Description - Top-to-bottom kit for use with all REBOX and IDF
cabinets
Finish: Light gray
Catalog No.
REKTJ
Description - Side-by-side kit - for
use with IDF24
Finish: Light gray
Catalog No.
REKSJ20
Description - Side-by-side kit - for
use with RE4X, IDF42
Finish: Light gray
Catalog No.
REKSJ30
Description
Side-by-side kit - for use with
RE2, RE4, IDF32
Finish: Light gray
Catalog No.
REKSJ40
110/66 Block Mounting Rails
Provides mounting for 110 and 66
blocks. Only for IDF cabinets.
Delivery:
2 110/66 block mounting rails
20 #10-24 x 1/2” screws
Material: 18 ga. cold rolled steel
Finish: Light gray powder coat
Catalog No.
REK110
REKUB
MT10 Adapter
REKMT10
Patch Panel Bracket
REKFP
B22
Accepts one Fiber Optic SixPack. For use with REbox and
IDF Cabinets.
Delivery:
1 Six-Pack adapter bracket
Finish:
Light gray powder coat
Catalog No.
REKFP
Bottom-Hinged Patch
Panel Mounting Bracket
Plywood Back Board
Provides universal mounting for
wall mounted brackets, blocks,
splitters, hubs and other devices.
For use only with IDF cabinets.
Delivery:
1.75” APA grade AC plywood
painted fire-retardant white
2 mounting brackets
1 assembly hardware kit
For use with IDF24, IDF32, IDF42
20”H x 19”W
Catalog No. REKBB20
For use with IDF32, IDF42
30”H x 19”W
Catalog No. REKBB30
For use with IDF42
40”H x 19”W
Catalog No. REKBB40
Mates MT10 large capacity, 3channel, non-metallic surface
raceway to top of REBOX™ and
IDF cabinets to deliver both electrical and communication cables
Delivery:
1 base, 16 ga. cold rolled steel
1 cover, 16 ga. cold rolled steel
1 cover hardware kit
Finish:
Light gray powder coat
Catalog No.
REKMT10
REK19
Use to mount patch panels.
Provides front access to rear for
easy termination.
Delivery:
2 brackets, 1 left hand, 1 right
hand
Finish:
Light gray powder coat
Catalog No.
REK19
Equipment Mounting
Bracket
Provides 19” mounting for hubs
and other active equipment. For
use only with IDF cabinets.
Delivery:
2 brackets, 1 left hand, 1 right
hand
Finish:
Light gray powder coat
Catalog No.
REKZ
▼
▼
Consolidation Point Enclosure
The Consolidation Point Enclosure provides a compact wall mount solution for
small scale cross connect or consolidation point equipment. It can be flush
mounted between 16" studs or surface
mounted to the wall.
Pre-threaded mounting
rails accept: 110 blocks
with legs, 89D brackets
Cable entry: top bottom
and sides
This economical enclosure provides
rack-like mounting down the center for
100-pair 110 blocks, 66 blocks, and
small patch panels mounted with 89D
brackets such as our 12-port blocks.
5 rack units - each
accepts 100-pair block or
89D bracket
Structured cabling pathways along each
side provide an engineered solution for
cable entry, egress, and routing.
Designated pathways for routing cable imitate equipment
racks and simplifies installation
and maintenance and include
multiple tie-off points
A mounting bracket and fiber take up
spools are included to accommodate up
to two Hubbell fiber FSP adapter panels
or JackPacks™, delivering true multimedia capability.
Mounting for 2 Six-Packs
or JackPacks™ provides
for multiple fiber and copper form factors
The attractive door can be easily
removed for installation and maintenance and can be secured with an
optional lock.
ORDER INFORMATION
▼
▼
▼
▼
Flexible mounting:
between studs, surface
mounted, below raised
Optional key lock profloor, or directly to wall and vides security when used
partitions
in remote locations
Delivery
Qty.
Item
1
Enclosure
1
Door
2
Mounting rails
1
Six-Pack adapter bracket
2
Fiber routing spools
1 kit Wall mount screws
1 kit Equipment mounting screws
Attractive styling available in 2 colors - blends
into any environment
SPECIFICATIONS
◆
Material
Enclosure: 16 ga. Cold Rolled Steel
Cover: 20 ga. Cold Rolled Steel
◆
Finish
Enclosure: Zinc Galvanized
Cover: Powder coat
FLOCK1
Consolidation Point Enclosure
Accessories
Consolidation Point Enclosure with Solid Cover
Color
Height
Width
Depth
Electrical Ivory
21” (533)
14.5” (368)
4.5” (114)
Black
21” (533)
14.5” (368)
4.5” (114)
Trim Ring
Color
Electrical Ivory
Black
Catalog No.
CPKTRI
CPKTRB
Call 1-800-626-0005
Louvered Cover
Color
Electrical Ivory
Black
Catalog No.
Description
Catalog No.
Lock kit for cabinets
FLOCK1
CPEI
CPEB
Catalog No.
CPKLDI
CPKLDB
www.hubbell-premise.com
B23
▼
▼
Premise Networking Cabinets
Our Premise Networking cabinets set the
standard for system aesthetics and functionality for data communications applications. These cost-effective cabinets
are available in four colors and are
specifically designed to house datacom
equipment and large bundles of cable.
Completely assembled cost-effective and saves
valuable time
Hubbell Premise Wiring’s unique design
and ease of use delivers structured vertical cable management versatility to
accommodate both cross connect and
system equipment.
Completely assembled premise networking cabinets are available in three sizes.
The cabinets are modular and provide
for access to equipment via removable
front and rear doors, and sides. Doors
and side panels provide a streamlined
appearance that complements any office
environment.
▼
▼
SPECIFICATIONS
◆
16 ga. welded steel construction
◆
Finish: durable powder coat
◆
Static weight capacity: 800 lbs.
Vented for excellent
air circulation
Durable textured powder
coat stocked in 4 colors
6 large (3”) cable entry
holes in top and bottom
19” Mounting
Rails
• Half-height front
rails
• Full-height “rack
uprights” in center
accept accessories for equipment racks
• Full height rear
angles for supporting deep
equipment
• All rails fully
adjustable from
front to rear
Modular design
with lift-off doors and
sides for easy
access
Locking Front and Rear
Doors - all cabinets
keyed alike. Key for front
door operates front door
locks only. Rear door
master key operates both
front and rear door locks
NOTE:
Mount cross connect
equipment such as patch
panels and patch cord
organizers towards the top
of the cabinet on center
“rack uprights” recessed
from front door for proper
bend radius allowance.
Mount deep, active equipment towards the bottom of
the cabinet supported by
the half-height front
uprights and the full-height
rear angles.
11 ga. CRS 19” rails
tapped 10-32 EIA-310-D
universal hole pattern accepts all HPW and
industry accessories
Aesthetic fullheight window
door
Vertical Cable Management
• Channels for routing
cable built into cabinet
uprights
• Points to tie-off cable
along entire height of
cabinet
B24
B24
Rugged, welded
steel construction
Full 30” usable
depth great for
handling network
equipment
▼
▼
ORDER INFORMATION
Delivery
Qty.
Description
Material
1
Frame
16 ga steel
1
Front window door
Plexi-glass window
1
Vented rear door
16 ga steel
2
Removable, vented side covers
16 ga steel
4
Locking side cover clips
Stainless steel
2
Half-height front 19” mounting rails
11 ga steel
2
Full-height rear 19” mounting rails
11 ga steel
2
Full-height center 19” cross connect rails
11 ga steel
1
Removable top cover
16 ga steel
4
Adjustable/leveling feet
Steel, Zn-plated
2**
Adjustable, fixed shelves
16 ga steel
1**
19” power strip
20
#10-32 x 5/8” screws for equipment mounting
** Indicates items not included with the Economy version.
Premise Networking Cabinets - Plexi-glass Style Door
H
Rack
Units
H
Height
W
Width
D
Depth
Colors
21
48.0” (1219)
19” (483)
31.5” (800)
Black
40
76.3” (1938)
19” (483)
31.5” (800)
40
76.3” (1938)
19” (483)
31.5” (800)
40
76.3” (1938)
19” (483)
31.5” (800)
40
76.3” (1938)
19” (483)
31.5” (800)
45
85.0” (2159)
19” (483)
31.5” (800)
45
85.0” (2159)
19” (483)
31.5” (800)
45
85.0” (2159)
19” (483)
31.5” (800)
45
85.0” (2159)
19” (483)
31.5” (800)
Catalog No.
HPW48C19X30
Black
HPW70C19X30
Blue
HPW70C19X30B
Tan
HPW70C19X30T
Office white HPW70C19X30W
Black
HPW78C19X30
Blue
HPW78C19X30B
Tan
HPW78C19X30T
Office white HPW78C19X30W
Premise Networking Cabinet with Vented Doors
45
85.0” (2159)
19” (483)
31.5” (800)
45
85.0” (2159)
19” (483)
31.5” (800)
HPW78C19X30LD
Office white HPW78C19X30LDW
Black
Premise Networking Cabinet - Economy Version
25 27”
.75 (w W
” ( ith
wi
tho side
ut s)
sid
es
)
”
(30
D 5” epth
.7 d
31 ble
a
us
)
Power strip mounted in rear (not shown)
See pa
ge
B30-B3 s
1
for a va
rie
of cabin ty
et
access
ories.
40
76.3” (1938)
19” (483)
31.5” (800)
Black
40
76.3” (1938)
19” (483)
31.5” (800)
Blue
40
76.3” (1938)
19” (483)
31.5” (800)
Black
40
76.3” (1938)
19” (483)
31.5” (800)
Tan
45
85.0” (2159)
19” (483)
31.5” (800)
Black
45
85.0” (2159)
19” (483)
31.5” (800)
Blue
45
85.0” (2159)
19” (483)
31.5” (800)
Tan
45
85.0” (2159)
19” (483)
31.5” (800)
Black
45
85.0” (2159)
19” (483)
31.5” (800)
Black
HPW70C19X30E
HPW70C19X30EB
HPW70C19X30EFA*
HPW70C19X30ET
HPW78C19X30E
HPW78C19X30EB
HPW78C19X30ET
HPW78C19X30EFA*
HPW78C19X30ELRD**
Premise Networking Cabinet Economy, without Side Covers
45
85.0” (2159)
19” (483)
31.5” (800)
Black
HPW78C19X30LS
* Without sides or doors
** Without rear door
Housing rack-mounted servers? See our Server Cabinets on page B26.
Call 1-800-626-0005
1-800-626-0005
Call
www.hubbell-premise.com
www.hubbell-premise.com
B25
▼
▼
The SVR Cabinet provides a secure, reliable housing for critical network equipment. Designed to simplify installation
and speed loading of equipment, the
SVR Cabinets arrive pre-assembled,
ready to use.
The unique honeycomb ventilation pattern, which covers the front and rear
doors, and top, provides a high degree of
open ventilation area while complementing the
appearance of every data-center.
A wide range of accessories complements the
SVR cabinets and can be used to adapt the
cabinet to various applications. The mounting
depth of the SVR series cabinets accommodates servers, UPSs, storage devices, and
other network equipment from all major manufacturers.
Arrives on site fully
assembled and ready to
use - Simply unpack, roll
down provided ramp, and
position in place
▼
▼
Server Cabinets
SPECIFICATIONS
◆
Durable powder-coat finish
◆
Front and rear 19” mounting rails:
yellow zinc-plated
◆
Cable opening in frame bottom:
11.8” (300mm)
◆
Internal equipment mounting per
EIA-310-D universal hole spacing - 9.2mm
square holes allowing the use of M6
cage nuts
◆
Packaging requirements to Telcordia™
GR63-CORE specifications
◆
1000 lb. static weight load capacity
Door easily reversed from right
to left-hand hinged on site
34” internal depth accommodates deep server
chassis (rails pre-set at 29.2” to accommodate
standard server mounting brackets)
Rolls through a standard 7’ doorway (79.5”H) without compromising
internal usable space
Superior engineered cooling
accommodates front to rear
and top to bottom cooling
schemes
Square holes accept cage
nuts, compatible with various
LAN equipment
Doors and sides easily removed
simplifying installation of equipment
Rugged construction supports
the demands of large, deep, and
heavy LAN equipment
Two 4” diameter cable entry
holes in top and bottom plus large
open bottom provide ample cable
entry/egress facilities
B26
19” internal rack
mounting compliant
with EIA-310-D
Locking front/rear
doors
▼
▼
ORDER INFORMATION
Delivery
Qty.
1
4
1
1
1
4
4
2
1
2
50
50
50
1
Description
Lightweight, heavy duty frame
Front/rear steel server mounting rails
Ventilated window door
Material
Aluminum
16 ga Steel
16 ga Steel
acrylic window
16 ga Steel
11 ga Steel
Ventilated rear door
Caster base
Pre-assembled casters (4 swivel, non-locking)
Adjustable feet (4 in forward outermost position)
Side covers secured with 1/4-turn fasteners
Ventilated top cover with 2 cable entry openings
in rear
Anti-tip angles
M6 x 12 screws
Plastic washers
Cage nuts, M6
Cage nut insertion tool
Steel
16 ga Steel
16 ga Steel
16ga Steel
Server Cabinets
Front view
Rack Usable
units Height
Front door open area
around perimeter of
glazed window:
150.5 in2 (971 cm2)
Rear door open area:
879.3 in2 (5,673 cm2)
Width
Depth
Color
Catalog No.
28
49.0”
55.1” (1400)
Height
23.5” (597)
35” (889)
Black
SVR48
28
49.0”
55.1” (1400)
23.5” (597)
35” (889)
Blue
SVR48B
28
49.0”
55.1” (1400)
23.5” (597)
35” (889)
Tan
SVR48T
28
49.0”
55.1” (1400)
23.5” (597)
35” (889)
Office White
SVR48W
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Black
SVR84
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Blue
SVR84B
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Tan
SVR84T
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Office White
SVR84W
Server Cabinets without Side Covers
Top cover open
area: 50.2 in2
(324 cm2)
28
49.0”
55.1” (1400)
23.5” (597)
35” (889)
Black
SVR48LS
28
49.0”
55.1” (1400)
23.5” (597)
35” (889)
Blue
SVR48LSB
28
49.0”
55.1” (1400)
23.5” (597)
35” (889)
Tan
SVR48LST
28
49.0”
55.1” (1400)
23.5” (597)
35” (889)
Office White
SVR48LSW
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Black
SVR84LS
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Blue
SVR84LSB
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Tan
SVR84LST
42
73.5”
79.5” (2020)
23.5” (597)
35” (889)
Office White
SVR84LSW
Top view
See pa
ge
B30-31 s
for a va
rie
of cabin ty
et
access
ories.
Cable Entry Hole
4” Ø (2X)
Call 1-800-626-0005
www.hubbell-premise.com
B27
▼
▼
Seismic Cabinets
Hubbell’s Seismic cabinets securely house cross connect equipment (patch panels) and/or active LAN equipment where seismic
activity is a concern.
This cabinet provides easy access to equipment via the removable roof, sides, and front/rear doors. It is reinforced for seismic
applications.
Delivery
Qty.
1
1
1
2
4
2
2
2
1
4
2**
1**
20
Description
Material
Frame
16 ga steel
Front window door
Plexi-glass window
Vented rear door
16 ga steel
Removable, vented side covers
16 ga steel
Locking side cover clips
Stainless steel
Half-height front 19” mounting rails
11 ga steel
Full-height rear 19” mounting rails
11 ga steel
Full-height center 19” cross connect rails 11 ga steel
Removable top cover
16 ga steel
Adjustable/leveling feet
Steel, Zn-plated
Adjustable, fixed shelves
16 ga steel
19” power strip
#10-32 x 5/8” screws for equipment mounting
FEATURES
▼
▼
▼
▼
** Indicates items not included with the Economy version.
■ 19” Mounting Rails
• Half-height front rails
• Full-height “rack uprights” in center accept
accessories for equipment racks
• Full height rear angles for support deep
equipment
• All rails fully adjustable from front to rear
■ Vertical Cable Management
• Channels for routing cable built into uprights
• Points to tie-off cable along entire cabinet height
■ Rugged, welded steel construction
■ Full 30” usable depth great for handling network
▼
▼
equipment
Independently verified to pass Telcordia
Zone 4 seismic test with 600 lb. load
◆
Durable powder-coat finish
◆
Front and rear 19” mounting rails:
yellow zinc-plated
◆
Cable opening in frame bottom:
11.8” (300mm)
◆
Rack mounting width: 19”
◆
19” rails tapped #10-32 (EIA-310)
universal hole pattern - accepts all
HPW and industry accessories
31.75” overall depth
30” usable depth
See pa
ge
B29-B3 s
1
for a va
rie
of cabin ty
et
access
ories.
B28
Seismic Cabinets - Plexi-glass Style Door
Rack units
40
40
40
40
45
45
45
45
Overall Height
76.3” (1938)
76.3” (1938)
76.3” (1938)
76.3” (1938)
85.0” (2159)
85.0” (2159)
85.0” (2159)
85.0” (2159)
Color
Black
Blue
Office White
Tan
Black
Blue
Office White
Tan
Catalog No.
HPW70S19X30
HPW70S19X30B
HPW70S19X30W
HPW70S19X30T
HPW78S19X30
HPW78S19X30B
HPW78S19X30W
HPW78S19X30T
Seismic Cabinets - Plexi-glass Style Door, No Side Covers
SPECIFICATIONS
◆
◆
ORDER INFORMATION
40
45
76.3” (1938)
85.0” (2159)
HPW70S19X30LS
HPW78S19X30LS
Black
Black
Seismic Cabinets - Economy Version
21
48”
21
48”
40
76.3”
40
76.3”
40
76.3”
40
76.3”
40
76.3”
40
76.3”
45
85.0”
45
85.0”
45
85.0”
45
85.0”
45
85.0”
45
85.0”
* Without sides or doors
** Without rear door
(1219)
(1219)
(1938)
(1938)
(1938)
(1938)
(1938)
(1938)
(2159)
(2159)
(2159)
(2159)
(2159)
(2159)
Black
Black
Black
Black
Blue
Office
Office
Tan
Black
Black
Blue
Office
Office
Tan
White
White
White
White
HPW48S19X30E
HPW48S19X30EFA*
HPW70S19X30E
HPW70S19X30EFA*
HPW70S19X30EB
HPW70S19X30EW
HPW70S19X30EFAW**
HPW70S19X30ET
HPW78S19X30E
HPW78S19X30EFA*
HPW78S19X30EB
HPW78S19X30EW
HPW78S19X30EFAW**
HPW78S19X30ET
Co-Location Cabinet
▼
▼
Hubbell’s Co-Location full size cabinet is designed for the
telecommunications market to house a full complement of
electronic switch gear equipment and associated cabling
in a secure, aesthetically-pleasing enclosure.
▼
▼
Available in both 19” and 23” panel mounting configurations, the “Co-Lo” cabinet is well-suited for a variety of
applications. Along with multiple cable routing options, the
“Co-Lo” cabinet provides ample thermal management by
way of fully louvered front and rear doors, vented side
panels, and a high-capacity top mount fan tray.
FEATURES
■
Self-supporting welded steel frame
■
Top and bottom frame covers designed with six (6) cable
cut-outs and fan tray mounting
■
Front and rear doors fully louvered with individually keyed
door locks
■
Removable side panels with top and bottom vents - locking
clips provided as an option
■
Top fan tray with four (4) 100 CFM fans fully wired for
115 VAC with 10’ cord terminated to a NEMA5-15P
rated plug
■
19” or 23” panel mounts (front and rear) with 12-24
tapped holes - universal pattern
■
Durable “computer white” powder coat finish
■
Cabinet supplied fully assembled
▼
▼
ORDER INFORMATION
Seismic Cabinets - Plexi-glass Style Door
Rack units
44
44
Height
84.8”
(2154)
84.8”
(2154)
Width
24”
(610)
31”
(787)
Call 1-800-626-0005
Depth
24”
(610)
31.2”
(793)
Weight
310 lbs.
Color
Black
Catalog No.
380 lbs.
Black
CLC23
CLC19
www.hubbell-premise.com
B29
▼
▼
ORDER INFORMATION
Premise Networking and Seismic Cabinet Accessories
Caster Base
Roof Mount Fans
Bolts to bottom of the premise
networking or seismic cabinets.
Raises height of cabinet by 4”.
Overall dimensions: 2.97”H x
21.75”W x 31.75”D.
Delivery: 1 Base (16 ga Steel),
4 swivel casters, 4 adjustable feet
and 1 kit mounting hardware.
Color
Catalog No.
Black
HPWCAST
Blue
HPWCAST4B
Tan
HPWCAST4T
Office white
HPWCASTW
Fully wired and ready for installation. 2 versions are available: a
full 250CFM or a low-noise, highperformance 400CFM to keep
network equipment cool.
Assembles to roof of cabinet in
place of solid top cover. The unit
does not interfere with cables
entering through the top and does
not occupy any rack space.
250CFM Fan
Delivery: 1 roof mount fan
assembly and 1 kit of mounting
hardware.
Stationary Shelf
Assembles to 19” uprights in
premise networking and seismic
cabinets and accommodates
equipment that is not rack mounted. Ideal for monitors, modems,
external drives and manuals.
Perforated for ventilation.
Dimensions: 17.5”W x 24”D.
Load capacity: 200 lbs.
Delivery: 1 shelf (16 ga Steel)
and 1 kit of mounting hardware.
Color
Catalog No.
Black
MCCPSHLF
Telescopic Shelf
Assembles to 19” uprights in
premise networking and seismic
cabinets providing a slide out surface for equipment where rear
access is crucial. Load capacity:
85 lbs. Dimensions: 16.75”W x
22”D.
Delivery: 1 shelf (16 ga Steel), 1
pair telescopic slides and 1 kit of
mounting hardware.
Color
Catalog No.
Black
MCCTELSHLF
HPWRFAN
Technical: Height: 2.1”; Input:
120VAC/60Hz; Noise: ~58dBA;
Power draw: 35W; Cord length: 8’
Color
Catalog No.
Black
HPWRFAN
Office white
HPWRFANW
400CFM
Delivery: 1 roof mount fan
assembly and 1 kit of hardware
Technical: Height: 2”; Input:
120VAC/60Hz; Noise: 51dBA;
Power draw: 72W
HPWRFANWLN
Color
Black
Office white
Blue
Tan
Catalog No.
HPWRFANLN
HPWRFANWLN
HPWRFANBLN
HPWRFANTLN
Grounding Bar
Assembles into cabinet to provide
a common ground for sensitive
equipment.
Delivery: 1 grounding bar and 1
kit of isolating mounting hardware
Catalog No.
MCCGBAR
Joining Kit
Sliding Tower Shelf
Assembles to bottom of premise
networking or seismic cabinets to
accommodate 2 server towers
side-by-side. Load capacity: 85
lbs. Dimensions: (each shelf)
8.63”W x 20”D.
Delivery: 2 shelves (16 ga
Steel), 1 kit mounting hardware.
Color
Catalog No.
Black
MCCTWRSHLV2
B30
Use to join cabinets side-by-side
Delivery: 6 each of the following: 1/4”-20 x 3/4” hex bolts, 1/4”
lock washers, 1/4” flat washers,
1/4”-20 hex nuts
Catalog No.
HPWJKIT
▼
▼
ORDER INFORMATION
Server Cabinet Accessories
▼
▼
Stationary Shelf
Fan Tray
Depth: 28.2” / Width: 16.9”
Load capacity: 200 lbs.
Delivery: 1 stationary shelf,
2 mounting brackets, 3 mounting
screws
Delivery: 1 pre-assembled fan
tray unit includes 4 100CFM fans,
10’ line cord terminated with
NEMA5-15P, and 1 kit mounting
hardware
Color
Black
Color
Black
Catalog No.
SVRSS
Catalog No.
SVRFT
Telescopic Shelf
19” Keyboard Drawer
Depth: 29.2” / Width: 16.5”
Load capacity: 200 lbs.
Delivery: 1 telescopic shelf preassembled with slides, 2 kits
mounting hardware
Delivery: 1 keyboard shelf with
sliding mouse tray, 2 telescopic
slide rails, 2 front mounting
brackets, 2 rear mounting brackets, 1 kit mounting hardware
Load capacity: 75 lbs.
Color
Catalog No.
Black
SVRTS
Color
Black
Catalog No.
HPWKD19
ORDER INFORMATION
Accessories for all Cabinets and Racks
Equipment Shelves
MCCCS19
MCCCWS19
MCCCWS19HD
Material: 16 ga. cold-rolled steel
Finish: Durable black powder coat
Dimensions: 3.5”H (89) x 17”W (432) x see below for depth
Delivery: 1 shelf and 4 HPW screws
Description
Load Capacity Depth
Catalog No.
Center Weighted
75 lbs.
19” (483)
MCCCWS19
Cantilevered
50 lbs.
14” (356)
MCCCS19
Perforated
50 lbs.
14” (356)
MCCCS19P
Heavy Duty
200 lbs.
21” (533)
MCCCWS19HD
Heavy Duty
200 lbs.
21” (533)
MCCCWS19HDA*
* Finish = aluminum
19” Keyboard Drawer
Delivery: 1 keyboard shelf with
sliding mouse tray, 2 telescopic
slide rails, 2 front mounting
brackets, 2 rear mounting brackets, 1 kit mounting hardware
Color
Black
Call 1-800-626-0005
www.hubbell-premise.com
Catalog No.
HPWKD19
B31
Power Distribution
MCCPSS19
Below is a complete line of power distribution accessories to meet any requirement. All are
15A/125VAC/60Hz.
Specifications: Power-on LED indicator, mounts in 19” racks, 1 rack unit high (1.75”), 10’
cord, surge protection meets UL 1363/UL 1449 requirements.
On/off
Transformer Twist Circuit # Outlets
switch Surge spacing
lock breaker front rear Cat. No.
yes
yes
no
no
yes
1
10
MCCPSS19
no
yes
yes
no
yes
4
4
MCCPSS19TS
yes
no
no
no
yes
0
10
HPWPWR
no
yes
yes
yes
yes
4
4
HPWPWRTSTLNS
MCCPSS19TS
Cabinet Light
Delivery: 1 light, 1 14W fluorescent light bulb, 1 drop light hook,
1 holder, 1 power cord, 1 lamp
base (with either manual or
motion detector switch), 1 assembly kit with mounting bracket
Description
Motion Detector
Switch
Catalog No.
CTK
Catalog No.
CLKM
CLKS
Mounting Hardware
For premise networking cabinets
Bag of 20 each #10-32 x 5/8” pan
head Phillips black screws for
mounting 19” equipment.
Catalog No. 1032RRSCRW20
B32
Cabinet Thermostat
Delivery: 1 thermostat, 1 adhesive-backed mounting bracket, 1
wiring harness
Mounting Hardware
For racks and wall mount cabinets
Bag of 20 each #12-24 x 5/8” pan
head Phillips black screws for
mounting 19” equipment.
Catalog No. 1224RRSCRW20