SW-442

advertisement
SW-442
GaAs SPDT Terminated Switch
DC - 3.0 GHz
Features
•
•
•
•
•
•
Low Insertion Loss: 0.5 dB typical up to 1 GHz
High Isolation: > 38 dB @ 900 MHz
Low Power Consumption: < 10µA @ -3 V
Positive or Negative 2.5 to 8 V Control
Low cost SOT-26 Package
Available in a lead free version: MASW-007935
M/A-COM Products
Rev. V4
Functional Schematic
Positive Control Voltage
Description
M/A-COM’s SW-442 is a GaAs monolithic switch in
a low cost SOT-26 surface mount plastic package.
The SW-442 is ideally suited for applications where
very low power consumption, low insertion loss and
very small size are required.
Typical application is in dual band systems which
require switching between small signal components
such as filter banks, single band LNA's, converters
etc. The SW-442 can be used in applications up to
0.25 Watts in systems such as CDMA, W-CDMA,
PCS, DCS1800, GSM and other analog/digital
wireless communications systems.
Functional Schematic
Negative Control Voltage
The SW-442 is fabricated using a mature 0.5 micron
GaAs PHEMT process. The process features full
passivation for increased performance and
reliability.
Ordering Information 1,2
Part Number
Package
SW-442-PIN
Bulk Packaging
SW-442TR
1000 piece reel
SW-442SMB
Sample Board
DC - 3.0 GHz tuning
Pin Configuration
Pin No.
Function
Description
1
RF1
RF Input/Output
2
GND
RF Ground
3
RF2
RF Input/Output
4
V2
V Control 2
5
RFC
RF Common
6
V1
V Control 1
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
SW-442
GaAs SPDT Terminated Switch
DC - 3.0 GHz
M/A-COM Products
Rev. V4
Electrical Specifications: TA = 25°C, Z0 = 50 Ω 3, VCTL = -3V (unless otherwise specified)
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss4
DC-1 GHz
1-2 GHz
2-3 GHz
dB
dB
dB
—
—
—
0.5
0.8
1.1
0.7
1.0
1.25
Isolation
DC-1 GHz
1-2 GHz
2-3 GHz
dB
dB
dB
36
25
21
38
28
22
—
—
—
VSWR
DC-2 GHz
2-3 GHz
Ratio
Ratio
—
—
1.4:1
1.6:1
1.5:1
1.7:1
P1dB (2.7 V supply)
500 MHz - 3 GHz
dBm
—
24
—
P1dB (5 V supply)
500 MHz - 3 GHz
dBm
—
28
—
IP2 (2.7 V supply)
2-Tone 900 MHz, 5 MHz spacing, 10 dBm each tone
dBm
—
80
—
IP3 (2.7 V supply)
2-Tone 900 MHz, 5 MHz spacing, 10 dBm each tone
dBm
—
50
—
Trise, Tfall
Ton, Toff
Transients
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In-Band
nS
nS
mV
—
—
—
40
60
10
—
—
—
Control Current
VCTL = -3V
µA
—
6
15
3. External DC blocking capacitors are required on all RF ports when using positive voltage control.
4. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz.
Absolute Maximum Ratings 5,6
Parameter
Absolute Maximum
Input Power (0.5 - 3.0 GHz)
3 V Control
5 V Control
+30 dBm
+33 dBm
Operating Voltage
+8.5 Volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. M/A-COM does not recommend sustained operation near
these survivability limits.
Truth Table
V1
V2
RFC RF1
RFC RF2
Positive7
0 + 0.2 V
+2.5 to +8
V
+2.5 to +8
V
0 + 0.2 V
On
Off
Off
On
Negative8
0 + 0.2 V -2.5 to -8 V
-2.5 to -8 V 0 + 0.2 V
Off
On
On
Off
Mode
(Control)
7. External DC blocking capacitors are required on all RF ports
and GND. GND capacitors can be used with positive control
voltage to resonate lead inductance for improved isolation.
8. If negative control is used, DC blocking capacitors and GND
capacitors are not required.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
SW-442
GaAs SPDT Terminated Switch
DC - 3.0 GHz
M/A-COM Products
Rev. V4
Typical Performance Curves
Output VSWR vs. Frequency over Temperature
Input VSWR vs. Frequency over Temperature
2.0
2.0
+25°C
-40°C
+85°C
1.8
1.6
1.6
1.4
1.4
1.2
1.2
1.0
0.0
0.5
1.0
1.5
2.0
2.5
+25°C
-40°C
+85°C
1.8
3.0
1.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Isolation vs. Frequency over Temperature
(Negative Control)
Isolation vs. Frequency over Temperature
(Positive Control)
60
50
CGDN=8pF
40
25°C
-40°C
+85°C
50
CGDN=39pF
40
30
30
20
20
10
0
0.0
10
0.5
1.0
1.5
2.0
2.5
3.0
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency over Temperature
(Positive Control)
3.0
Insertion Loss vs. Frequency over Temperature
(Negative Control)
1.50
CGDN=8pF
2.5
2.0
1.00
1.5
0.75
1.0
0.50
0.5
0.25
0.0
0.0
0.5
1.0
25°C
-40°C
+85°C
1.25
CGDN=39pF
1.5
2.0
Frequency (GHz)
2.5
3.0
0.00
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
SW-442
GaAs SPDT Terminated Switch
DC - 3.0 GHz
M/A-COM Products
Rev. V4
SOT-26 Plastic Package†
†
Meets JEDEC moisture sensitivity level 1 requirements.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
Download