Antennen · Electronic
Contents
Offset parabolic antennas
Receiving electronics (feed systems), Multifeed reception
Receivers
Voltage surge protector, Installation
Page
3
4
5
Single receiving systems
1 subscriber (also multifeed reception with 2 or 3 satellites)
6
1 subscriber (multifeed reception with 4 satellites),
2 subscribers (also multifeed reception with 2 satellites)
7
2 subscribers (multifeed reception with 3 satellites)
8
Community antenna systems
2 x Sat IF (low-band)
9
4 x Sat IF (low-/high-band, analogue and digital)
10–13
8 x Sat IF (multifeed, DiSEqCTM, low-band/high-band, analogue and digital)
14–17
12/16 x Sat IF (multifeed, DiSEqCTM, low-band/high-band, analogue and digital)
Single-cable matrix system UFO® micro
18
19–22
Connection diagrams for receivers
23
Head office, national sales offices, service centres, customer service
24
The following described components and installation examples for satellite receiving systems are
meant to assist you with planning and cost calculations (no guarantee of completeness).
Obviously, the examples cannot cover all potential installation possibilities which the specialist
installer may be confronted with in daily practice.
Nevertheless, we hope that, even for those systems not presented, appropriate installations may be
derived from the examples shown.
The term „DiSEqCTM“ mentioned in this publication is a registered trademark of the European Telecommunication Satellite Organization (EUTELSAT).
Offset parabolic antennas
Kathrein parabolic antennas are manufactured from aluminium with
outstanding features, which include stability, strong durability, high precision and
stability of shape. The powder-coated support for the
receiving electronics (feed systems), which is made of galvanised
sheet steel, is included in the scope of delivery of the antenna.
For ASTRA single receiving systems, satisfactory nation-wide reception in
Germany is possible with parabolic antennas with a diameter of 57 cm or 75 cm.
Kathrein offset parabolic antennas have been repeatedly acclaimed by specialist
publications for their material quality, simple installation and good receiving
characteristics.
Overview
Colour
Dish-Ø
White
57 cm
75 cm
90 cm
Graphite
Russet
Type, order no.
CAS 06, 20010005 CAS 60, 20010006
–
CAS 075, 216218 CAS 75, 216223
CAS 75/R, 216261
CAS 09, 216083
CAS 90, 216224
CAS 90/R, 216262
Kathrein supplies offset
parabolic antennas with
diameters of 57 cm , 75 cm and 90 cm.
Multifeed reception
Multifeed reception requires two or three feed systems mounted on one parabolic antenna to receive signals from satellites occupying two or three different
orbital positions.
Kathrein components make it possible to set up multifeed systems for many
subscribers.
For multifeed reception, Kathrein recommends using a parabolic antenna with a
diameter of 90 cm or larger.
Community antenna systems
Kathrein offers the systems UFO®compact, UFO®plus and UFO®DIGIplus for
MATV systems with central signal processing.
Offset parabolic antenna with a diameter of 90 cm
and 2 feed systems for reception of 2 satellites.
Receiving electronics (Feed systems)
Kathrein feed systems (LNBs) comply with the highest technical standards
and are completely protected against environmental effects in a
protective cover. The feed systems referred to in the following satellite
system examples are solely feed systems for offset parabolic antennas.
Note:
The elevation difference of the satellites, which
are to be received, should be lower than 0.7°.
UAS 177, order no.: 268105
Universal single feed system with 1 output for single receiving systems
-10.70-11.70 and 11.70-12.75 GHz
-2 polarisations (vertical and horizontal, switchable with 14/18 V)
-2 frequency ranges (low-band and high-band, switchable with 22 kHz signal)
-For analogue and digital reception
UAS 272, order no.: 268119
Universal twin feed system
with 2 outputs for single and community systems
-10.70-11.70 and 11.70-12.75 GHz
-2 polarisations (vertical and horizontal, switchable with 14/18 V)
-2 frequency ranges (low-band and high-band, switchable with 22 kHz signal)
-For analogue and digital reception
UAS 484, order no.: 268101
Universal quatro feed system with 4 outputs for community systems
-10.70-11.70 and 11.70-12.75 GHz
-2 polarisations (vertical and horizontal)
-2 frequency ranges (low-band and high-band)
-For analogue and digital reception
UAS 485, order no.: 268120
Universal quatro feed system with 4 switchable outputs for community
systems
-10.70-11.70 and 11.70-12.75 GHz
-2 polarisations (vertical and horizontal, switchable with 14/18 V)
-2 frequency ranges (low-band and high-band, switchable with 0/22 kHz signal)
-For analogue and digital reception
-For 4 subscribers without additional matrix
-Extendable to more than 4 subscribers
3
Receivers
All receivers comply with the latest technical standards and are
easily operated by means of a remote control which is included
in the scope of delivery.
A generous assortment of sockets on the rear panel of the
receiver allows universal connection possibilities for a TV set,
video recorder and hi-fi system.
For each type of application, there is an ideal receiver; In the
Kathrein product range, you will definitely find the right unit to
meet your requirements.
Analogue and digital receivers, ADR compatible receivers and
twin receivers for reception of radio and TV programmes are all
included in the extensive product range.
Analogue receivers UFD 400, order no.: 260467
The standard unit of the new 400 series is equipped with
250 memory positions, a mains switch, battery backup
for date and time and the best sound quality with the
Wegener Panda noise reduction system.
UFD 420, order no.: 260441
The twin Sat receiver has two tuners and allows simultaneous operation of a TV and video recorder with two
different programmes. The receiver has the same
features as the UFD 400.
UFD 430, order no.: 260442
In addition to the features of the UFD 400, this receiver
also offers reception of ADR radio programmes. The
programme name and ADR data are displayed on the
8-figure LED display.
Stiftung Warentest 9/99
UFD 420
9/99
2 Twin-Receiver im Test,
2 x gut
UFD 440, order no.: 260462
Top-class ADR twin receiver with two tuners and ADR
reception part.
Equipped with the same features as the UFD 430.
UFD 515,
Black,
UFD 515/S, Silver,
The UFD 515 / 515/S is suitable for reception of digital,
QPSK-modulated signals according to the DVB-S
standard and is equipped with two Common Interfaces,
which allow insertion of two different Conditional
Access Modules (CAM).
With the appropriate Smart-Cards, the Conditional
Access Modules allow access to a variety of applications such as reception of pay TV and pay-per-view
programmes, internet and software offers. The receiver
is equipped with the same features as the UFD 505 or
UFD 505/S.
Digital receivers (DVB)
UFD 554,
Black,
UFD 554/S, Silver,
HiFi Test 1/00
UFD 515
4 Digital-Sat-Receiver im Test
2 x sehr gut, 2 x gut – sehr gut
UFD 505, Black,
UFD 505/S, Silver,
order no.: 20210008
order no.: 20210015
The UFD 505 / 505 S has been designed for reception of unencrypted,
QPSK-modulated (digital) signals according to the DVB-S standard.
The receiver offers extensive features including 1,800 memory positions,
picture format recognition 4:3 and 16:9, a radio key and four timers.
4
order no.: 20210009
order no.: 20210016
order no.: 20210010
order no.: 20210005
The DVR receiver UFD 554 / 554/S with integrated hard
disk receives and records digital satellite TV and radio
programmes. The receiver does not only allow recording
of a programme but also a simultaneous or time-shifted
replay from the hard disk. During a recording, you also
have the possibility to replay an already recorded programme.
The integrated hard disk has a memory capacity of 40
gigabytes with a recording capacity of 20-28 hours.
The software downloading occurs via satellite or via the
integrated RS 232 interface. The receiver is equipped
with an optical and electrical output for Dolby Digital
data stream for AC 3 signals. Programme scan
function, programme assortment function, two Common
Interfaces, timer, SCPC reception, S-VHS output
(via Scart socket) and a mains switch round off the
extensive features of the unit.
Voltage surge protector
KAZ 11, order no. 507205
The voltage surge protector KAZ 11 is used in receiving and
distribution systems for protecting the components against
transient voltages.
It supplements the potential equalisation measures prescribed
for antenna systems according to EN 50083-1. The unit
reduces surges between the centre and outer conductor of
coaxial cables to safe values.
The KAZ 11 is directly connected to the coaxial cables leading
to the units which need to be protected
(e.g. antenna amplifiers, switching matrices, etc.).
Block diagram
Installation
For the parabolic antennas with a diameter of 57, 75 or 90 cm,
there are seldom installation problems thanks to their small dimensions. If the imaginary, uninterrupted line between the antenna and satellite is assured, a variety of mounting types is
feasible.
The simplest mounting for the 57 and 75 cm
antenna is achieved via a wall mounting.
Attention!
Satellite systems must be grounded in conformity with the VDE
regulations (observe EN 50083, part 1).
A roof installation is as feasible...
...as the installation on the garage or
terrace.
Safety instructions regarding the mounting site for antennas
Kathrein antennas are designed and produced according to the
standard EN 50083, part 1.
When selecting a mounting site, typical structural characteristics, such as susceptibility to oscillation, installation on the
edge of the roof or building or on cylindrical structure, must
reckon with a higher wind load according to DIN 1055, part
4/08.86 or DIN 4131.
5
Single receiving systems
Low-band/high-band
Analogue a. digital
Single reception
1 subscriber
1 satellite
2 polarisations (H/V)
Analogue and digital *)
Low-band/high-band
Terrestrial signals
(WFS 23)
Switching criteria:
Vert./Horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat IF
Low-band/high-band
Analogue a. digital
DiSEqCTM
Multifeed reception
1 subscriber
2 satellites
2 polarisations (H/V)
Analogue and digital *)
Low-band/high-band
Terrestrial signals
(WFS 23)
Sat IF
Switching criteria:
Vert./Horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat A/B
DiSEqC™
Alternative: EXR 21
Low-band/high-band
Analogue a. digital
DiSEqCTM
Multifeed reception
1 subscriber
3 satellites
2 polarisations (H/V)
Analogue and digital *)
Low-band/high-band
Terrestrial signals
(WFS 23)
Switching criteria:
Vert./Horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat A/B/C
DiSEqC™
Sat IF
Note:
For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
6
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
- DiSEqCTM Repeat
1
- Tone burst,
Off
UFO® mini, UFO® micro
Single receiving systems
Low-band/high-band
Analogue a. digital
DiSEqCTM
Multifeed reception
1 subscriber
4 satellites
2 polarisations (H/V)
Analogue and digital *)
Low-band/high-band
Terrestrial signals (WFS 23)
Switching criteria:
Vert./Horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat A/B/C/D
DiSEqC™
Optimal receiver setting:
- 22 kHz
High/Low
- DiSEqCTM
On
1
- DiSEqCTM Repeat
- Tone Burst,
Off
UFO® mini, UFO® micro
Sat IF
Low-band/high-band
Analogue a. digital
2 x switchable
Twin operation /2 subscribers
Twin feed system, switchable
1 satellite
2 polarisations (H/V)
Analogue and digital *)
Low-band/high-band
Terrestrial signals
(WFS 14)
Switching criteria:
Vert./Horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat IF
Low-band/high-band
Analogue a. digital
TM
DiSEqC
Multifeed reception
Twin operation/2 subscribers
2 satellites
2 polarisations (H/V)
Analogue and digital *)
Low-band/high-band
Terrestrial signals
(WFS 14)
Switching criteria:
Vert./Horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat A/B
DiSEqC™
Sat IF
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
Note:
• Please observe the maximal power draw for twin receivers.
• For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
7
Single receiving systems
Low-band/high-band
Analogue a. digital
DiSEqCTM
Multifeed reception
2 subscribers
3 satellites
2 polarisations (H/V)
Analogue and digital *)
Low-band/high-band
Terrestrial signals
(WFS 14)
Switching criteria:
Vert./Horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat A/B/C
DiSEqC™
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
- DiSEqCTM Repeat
1
- Tone burst,
Off
UFO® mini, UFO® micro
Sat IF
List of components (for pages 6, 7 and 8)
Price
Price
Offset parabolic antenna
CAS ...
_____________
____ satellite receiver(s)
UFD ...
_____________
____ feed systems
UAS ...
_____________
____ terminating resistors
EMK 03
_____________
Mast or wall support
ZAS ...
_____________
____ voltage surge protector(s)
KAZ 11
_____________
Injection diplexer
WFS 14
_____________
Accessories
_____________
Sat range diplexer
WFS 23
_____________
Installation
_____________
DiSEqC™ switching matrices
EXR ...
_____________
Subtotal
_____________
____ m coaxial cable(s)
LCD ...
_____________
VAT
_____________
____ antenna socket(s)
ESD ...
_____________
____ connection cable(s)
ETG ...
_____________
Total price
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
8
Community antenna systems (2 x Sat IF)
Low-band
or
4 subscribers
1 satellite
2 polarisations (H/V)
Low-band
Terrestrial signals
Alternative:
EXR 204
(without terrestrial)
Switching criterion:
Vert./horiz. 14/18 V
Sat IF
If necessary,
connection of NCF
18 is possible.
Low-band
8 subscribers
Extendable
1 satelllite
2 polarisations (H/V)
Low-band
Terrestrial signals
or
Switching criterion:
Vert./horiz. 14/18 V
Sat IF
Low-band
20 subscribers
1 satelllite
2 polarisations (H/V)
Low-band
Terrestrial signals
or UAS
Switching criterion:
Vert./horiz. 14/18 V
Sat IF
List of components
Price
Price
Offset parabolic antenna
CAS ...
_____________
____ antenna socket(s)
ESD ...
_____________
____ feed systems
UAS ...
_____________
____ connection cable(s)
ETG ...
_____________
Mast or wall support
ZAS ...
_____________
____ satellite receiver(s)
UFD ...
_____________
End-line switching matrix (EXR 204/304)
_____________
____ voltage surge protector(s)
KAZ 11
_____________
Switching matrix
EXR 308
_____________
Accessories
_____________
____ loop-through matrices
EXR 334
_____________
Installation
_____________
Sat distribution amplifier
VWS 330
_____________
Subtotal
_____________
Power supply unit
NCF 18
_____________
VAT
_____________
____ m coaxial cable(s)
LCD ...
_____________
Total price
_____________
*) UAS 474 and UAS 478 are discontinued items.
**) Voltage surge protector KAZ 11.
9
Community antenna systems (4 x Sat IF)
Low-band/high-band
Analogue a. digital
4 x switchable
4 subscribers
Quatro feed system
Switchable
Extendable with
matrix EXR 508
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals (WFS 14)
Sat IF
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
- DiSEqCTM Repeat
Off
- Tone burst,
Off
UFO® mini, UFO® micro
Extension
Low-band/high-band
Analogue a. digital
8 subscribers
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat IF
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
- DiSEqCTM Repeat
Off
- Tone burst,
Off
UFO® mini, UFO® micro
Note:
• Switch on the 22-kHz signal on the power supply unit!
List of components (for pages 10 and 11)
Price
Price
Offset parabolic antenna
CAS ...
_____________
____ antenna socket(s)
ESD ...
_____________
____ feed systems
UAS ...
_____________
____ connection cable(s)
ETG ...
_____________
Mast or wall support
ZAS ...
_____________
____ satellite receiver(s)
UFD ...
_____________
Injection diplexer
WFS 14
_____________
____ terminating resistors
EMK 03
_____________
KAZ 11
_____________
Converter/range diplexer
UWS 78
_____________
____ voltage surge protector(s)
Switching matrix
EXR 504
_____________
Accessories
_____________
Switching matrix
EXR 508
_____________
Installation
_____________
End-line switching matrix
EXR 514
_____________
Power supply unit
NCF 18
_____________
____ m coaxial cable(s)
LCD ...
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
10
Subtotal
_____________
VAT
_____________
Total price
_____________
Community antenna systems (4 x Sat IF)
The following 7 installation examples can be carried out in two ways:
a) New system
or
Quatro feed
system
UAS 484
Sat IF
950-1950 MHz (Low-band)
1100- 2150 MHz (High-band)
b) Extending an existing system with a reflector with a
diameter of 57 or 75 cm and UAS 474 or UAS 478.
Not suitable for new systems!
Broadband feed system
UAS 474 or
UAS 478
Sat IF
950-3000 MHz
If necessary, pre-circuit VWS 220.
UAS 474 and UAS 478 are discontinued.
The shown connection sequence applies to all the following 7 installation examples.
Low-band/high-band
Analogue a. digital
If necessary,
connection of
NCF 18 is
possible.
4 subscribers
Extendable with EXR 554/558
(The power supply unit NCF 18 is
additionally required.)
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat IF
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
Also see installation with UAS 485, page 10
Low-band/high-band
Analogue a. digital
4 subscribers
Extendable with EXR 554/558
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Sat IF
Also see installation with UAS 485, page 10
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
- DiSEqCTM Repeat
Off
- Tone burst,
Off
UFO® mini, UFO® micro
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
11
Community antenna systems (4 x Sat IF)
Low-band/high-band
Analogue a. digital
8 subscribers
Extendable with EXR 554/558
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat IF
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
- DiSEqCTM Repeat
Off
- Tone burst,
Off
UFO® mini, UFO® micro
Low-band/high-band
Analogue a. digital
16 subscribers
Extendable with EXR 554/558
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat IF
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
Low-band/high-band
Analogue a. digital
Sat IF
Alternative EXR 5016
20 subscribers
Extendable with EXR 554/558
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
List of components
Offset parabolic antenna
____ feed systems
Mast or wall support
Switching matrix
____ loop-through matrices
Loop-through matrix
Switching matrix
Sat distribution amplifier
____ m coaxial cable(s)
CAS ...
UAS ...
ZAS ...
EXR 508
EXR 554
EXR 558
EXR 5016
VWS 551
LCD ...
Price
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
12
____ antenna socket(s)
____ connection cable(s)
____ satellite receiver(s)
____ voltage surge protector(s)
Accessories
Installation
Subtotal
VAT
Total price
ESD ...
ETG ...
UFD ...
KAZ 11
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
Community antenna systems (4 x Sat IF)
Low-band/high-band
Analogue a. digital
96 subscribers
Max. admissible cascade
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Sat IF
Alternative
EXR 5016
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
- DiSEqCTM Repeat
Off
- Tone burst,
Off
UFO® mini, UFO® micro
2 x, 3 x or 4 x
96 subscribers
4 x Sat IF
Multifeed or
low-band/high-band
VWS 500 for compensation of the
cable and distribution loss as well
as for level matching
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Matrix distribution amplifier
- For compensating the cable loss
and distribution loss
- For systems with 2 x, 3 x or 4 x 96
subscribers
Optimal receiver setting:
- 22 kHz
High/Low
Off
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
List of components
Price
Price
Offset parabolic antenna
CAS ...
_____________
____ antenna socket(s)
ESD ...
____ feed systems
UAS ...
_____________
____ connection cable(s)
ETG ...
_____________
Mast or wall support
ZAS ...
_____________
____ satellite receiver(s)
UFD ...
_____________
Switching matrix
EXR 508
_____________
____ terminating resistors
EMK 03
_____________
Loop-through matrix/matrices
EXR 554
_____________
____ voltage surge protector(s)
KAZ 11
_____________
____ loop-through matrix/matrices EXR 558
_____________
Accessories
_____________
_____________
_____________
Matrix distribution amplifier
VWS 500
_____________
Installation
Sat distribution amplifier
VWS 551
_____________
Subtotal
_____________
Sat IF splitter
EBX 520
_____________
VAT
_____________
____ m coaxial cable(s)
LCD ...
_____________
Total price
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
13
Community antenna systems (8 x Sat IF)
Multifeed
a) New system
or
2 x UAS 484
Quatro feed system
b) Extending an existing system with a reflector with a
diameter of 75 cm and UAS 474 or UAS 478.
Not suitable for new systems!
Broadband feed system
2 x UAS 474
or
2 x UAS 478
Sat IF
950–3000 MHz
Sat IF 950–2150 MHz
If necessary, pre-circuit VWS 220.
UAS 474 and UAS 478 are discontinued.
The shown connection sequence applies to all the following 5 installation examples.
Low-band/high-band
Analogue a. digital
DiSEqCTM
4 subscribers
(Not extendable)
2 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
(WFS 14)
Switching criteria:
Vert./horiz.
14/18 V
Low-band/high-band 0/22 kHz
Sat A/B
DiSEqC™
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
Note:
• Please observe the maximal power draw for twin receivers.
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
14
Community antenna systems (8 x Sat IF)
Multifeed
Low-band/high-band
Analogue a. digital
DiSEqCTM
4 subscribers
(Extendable with EXR 994/998)
2 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
DiSEqC™ 8 x Sat IF or
14/18 V, 0/22 kHz and
Tone burst 8 x Sat IF or
14/18 V
Horiz./vert.
0/22 kHz Sat A/B
(Low-band)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
Low-band/high-band
Analogue a. digital
DiSEqCTM
8 subscribers
(Extendable with EXR 994/998)
2 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
DiSEqC™ 8 x Sat IF or
14/18 V, 0/22 kHz
Tone burst 8 x Sat IF or
14/18 V
Horiz./vert.
0/22 kHz Sat A/B
(Low-band)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
List of components (for pages 14 and 15)
Price
Price
Offset parabolic antenna***)
CAS ...
_____________
____ connection cable(s)
ETG ...
_____________
____ feed systems
UAS ...
_____________
____ satellite receiver(s)
UFD ...
_____________
Mast or wall support
ZAS ...
_____________
____ voltage surge protector(s)
KAZ 11
_____________
2 converters/range diplexers
UWS 78
_____________
Accessories
_____________
WFS 14
_____________
Installation
_____________
____ DiSEqCTM 2.0 switching matr. EXR 21
_____________
Subtotal
_____________
DiSEqCTM 2.0 switching matrix
EXR 904
_____________
VAT
_____________
DiSEqCTM 2.0 switching matrix
EXR 908
_____________
Total price
_____________
____ m coaxial cable(s)
LCD ...
_____________
____ antenna socket(s)
ESD ...
_____________
Injection diplexer
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
***) For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
15
Community antenna systems (8 x Sat IF)
Multifeed
Low-band/high-band
Analogue a. digital
DiSEqCTM
12 subscribers
(Extendable with EXR 994/998)
2 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
DiSEqC™ 8 x Sat IF or
14/18 V, 0/22 kHz and
Tone burst 8 x Sat IF or
14/18 V
Horiz./vert.
0/22 kHz Sat A/B
(Low-band)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
Low-band/high-band
Analogue a. digital
DiSEqCTM
16 subscribers
(Extendable with EXR 994/998)
40 subscr. in direct cascade
2 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
DiSEqC™ 8 x Sat IF or
14/18 V, 0/22 kHz and
Tone burst 8 x Sat IF or
14/18 V
Horiz./vert.
0/22 kHz Sat A/B
(Low-band)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
List of components
Price
Price
Offset parabolic antenna***)
CAS ...
_____________
____ voltage surge protector(s)
____ feed systems
UAS ...
_____________
Accessories
_____________
Mast or wall support
ZAS ...
_____________
Installation
_____________
DiSEqC
EXR 908 _____________
TM
____ DiSEqC
____ DiSEqC
TM
_____________
2.0 loop-through matr. EXR 994 _____________
VAT
_____________
2.0 loop-through matr. EXR 998 _____________
Total price
_____________
____ m coaxial cable(s)
LCD ...
_____________
____ antenna socket(s)
ESD ...
_____________
____ connection cable(s)
ETG ...
_____________
____ satellite receiver(s)
UFD ...
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
***) For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
16
_____________
Subtotal
2.0 switching matrix
TM
KAZ 11
Community antenna systems (8 x Sat IF)
Multifeed
Low-band/high-band
Analogue a. digital
DiSEqCTM
96 subscribers
Max. admissible cascade
2 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criteria:
DiSEqC™ 8 x Sat IF or
14/18 V, 0/22 kHz and
Tone burst 8 x Sat IF or
14/18 V
Horiz./vert.
0/22 kHz Sat A/B
(Low-band)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
2 x, 3 x or 4 x
40 subscribers
VWS 551 for compensation of the
cable and distribution loss as well
as for level matching
Switching criteria:
DiSEqC™ 8 x Sat IF or
14/18 V, 0/22 kHz and
Tone burst 8 x Sat IF or
14/18 V
Horiz./vert.
0/22 kHz Sat A/B
(Low-band)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
Off
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
List of components
Price
Price
Offset parabolic antenna***)
CAS ...
_____________
____ antenna socket(s)
ESD ...
____ feed systems
UAS ...
_____________
____ connection cable(s)
ETG ...
_____________
Mast or wall support
ZAS ...
_____________
____ satellite receiver(s)
UFD ...
_____________
DiSEqCTM 2.0 switching matrix
EXR 908 _____________
____ voltage surge protector(s)
KAZ 11
_____________
____ DiSEqC
TM
2.0 loop-through matr. EXR 998 _____________
Accessories
_____________
_____________
VWS 991 _____________
Installation
_____________
Matrix distribution amplifier
VWS 500 _____________
Subtotal
_____________
____ Sat IF splitter(s)
EBX 520 _____________
VAT
_____________
____ m coaxial cable(s)
LCD ...
_____________
Total price
_____________
____ antenna socket(s)
ESD ...
_____________
____ Sat distribution amplifier(s)
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
***) For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
17
Community antenna systems (12/16 x Sat IF)
Multifeed
Low-band/high-band
Analogue a. digital
DiSEqCTM
n subscribers
(Extendable with EXR 554/558,
EXR 994/998 and EXR 21)
3 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criterion:
DiSEqCª
12 x Sat
****)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
1
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
Low-band/high-band
Analogue a. digital
DiSEqCTM
n subscribers
(Extended with EXR 994/998 and
EXR 21)
4 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital*)
Terrestrial signals
Switching criterion:
DiSEqC™
16 x Sat
****)
Optimal receiver setting:
- 22 kHz
High/Low
On
- DiSEqCTM
1
- DiSEqCTM Repeat
- Tone burst,
Off
UFO® mini, UFO® micro
List of components
Price
EXR 21
_____________
Offset parabolic antenna***)
CAS ...
_____________
____ m coaxial cable(s)
LCD ...
_____________
____ feed systems
UAS ...
_____________
____ antenna socket(s)
ESD ...
_____________
Mast or wall support
ZAS ...
_____________
____ connection cable(s)
ETG ...
_____________
DiSEqC
2.0 switching matrix
EXR 904 _____________
____ satellite receiver(s)
UFD ...
_____________
DiSEqC
2.0 switching matrix
EXR 908 _____________
____ voltage surge protector(s)
KAZ 11
_____________
TM
TM
____ DiSEqC
TM
____ DiSEqC
TM
____ DiSEqCTM switching matrices
2.0 loop-through matr. EXR 994 _____________
Accessories
_____________
2.0 loop-through matr. EXR 998 _____________
Installation
_____________
____ switching matrix
EXR 508 _____________
Subtotal
_____________
____ loop-through matrices
EXR 554 _____________
VAT
_____________
____ loop-through matrices
EXR 558 _____________
Total price
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
***) For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
18
****) One EXR 21 is required for each
subscriber.
Single-cable matrix system
UFO® micro (exclusively controllable with UFO® micro compatible receivers)
4 receivers 1)
UFO® micro
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Low-band/high-band
Analogue a. digital
Switching criterion:
UFO®micro mode
8 receivers 1)
UFO® micro
Low-band/high-band
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Analogue a. digital
Switching criterion:
UFO®micro mode
12 receivers 1)
UFO® micro
Low-band/high-band
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Analogue a. digital
Switching criterion:
UFO®micro mode
Note:
- If possible, please set up small
system segments.
- Four sockets connected in a
line are exclusively supplied via
their own EXU 544.
UFO® micro
4 + 4 + 4 receivers 1)
Low-band/high-band
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Analogue a. digital
Switching criterion:
UFO®micro mode
Note:
- If possible, please set up small
system segments.
- Four sockets connected in a
line are exclusively supplied via
their own EXU 544.
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
) One twin receiver is considered as
two receivers.
1
19
Single-cable matrix system
UFO® micro (exclusively controllable with UFO® micro compatible receivers)
16 receivers 1)
UFO® micro
Low-band/high-band
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Analogue a. digital
Switching criterion:
UFO®micro mode
Note:
- If possible, please set up small
system segments.
- Four sockets connected in a
line are exclusively supplied via
their own EXU 544.
24 receivers 1)
UFO® micro
Low-band/high-band
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Analogue a. digital
Switching criterion:
UFO®micro mode
Note:
- If possible, please set up small
system segments.
- Four sockets connected in a
line are exclusively supplied via
their own EXU 544.
8 receivers 1)
(4 with EXU 544,
4 with EXR 504)
UFO® micro
Low-band/high-band
Analogue a. digital
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Switching criteria:
UFO®micro mode
0/22 kHz (EXR 504)
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
20
) One twin receiver is considered as
two receivers.
1
Single-cable matrix system
UFO® micro (exclusively controllable with UFO® micro compatible receivers)
UFO® micro
Multifeed reception
4 receivers 1)
Low-band/high-band
Analogue a. digital
1 satellite
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Switching criterion:
UFO®micro mode
) One twin receiver is considered as
two receivers.
1
UFO® micro
Low-band/high-band
Analogue a. digital
Multifeed reception
12 receivers 1)
(8 with EXU 544, 4 with EXR 904)
2 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signals
Switching criteria:
UFO®micro mode
DiSEqC™ (EXR 904)
) One twin receiver is considered as
two receivers.
1
List of components (for pages 19, 20 and 21)
Price
Offset parabolic antenna(s)***)
CAS ...
_____________
____ feed systems
UAS ...
_____________
Mast or wall support
ZAS ...
_____________
____ single-cable matrix/matrices EXU 544
_____________
____ switching matrix/matrices
EXR 504
_____________
DiSEqCTM 2.0 switching matrix
EXR 904
_____________
Sat distribution amplifier
VWS 551
_____________
Splitter
EBC…
_____________
____ terminating resistors
EMK 03
_____________
____ terminating resistors
ERA 14
_____________
____ DC blocker(s)
EMU 12
_____________
____ connection cable(s)
EVL 165
_____________
____ m coaxial cable(s)
LCD ...
_____________
____ antenna socket(s)
ESU 31/32
_____________
____ antenna socket(s)
ESD ...
_____________
____ connection cable(s)
ETG ...
_____________
____ satellite receiver(s)
UFD ...
_____________
____ voltage surge protector(s)
KAZ 11
_____________
Accessories
_____________
Installation
_____________
Subtotal
_____________
VAT
_____________
Total price
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
***) For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
21
Single-cable matrix system
UFO® micro (exclusively controllable with UFO® micro compatible receivers)
UFO® micro
Multifeed reception
12 receivers 1)
Low-band/high-band
Analogue a. digital
3 satellites
2 polarisations (H/V)
Low-band/high-band
Analogue and digital *)
Terrestrial signal
Switching criterion:
UFO®micro mode
Other
satellite
) One twin receiver is considered as
two receivers.
1
List of components
Price
Price
Offset parabolic antenna(s)***)
CAS ...
_____________
____ connection cable(s)
ETG ...
_____________
____ feed systems
UAS ...
_____________
____ satellite receiver(s)
UFD ...
_____________
Mast or wall support
ZAS ...
KAZ 11
_____________
____ single-cable matrix/matrices EXR 554
_____________
____ voltage surge protector(s)
_____________
Accessories
_____________
Splitter
EBC…
_____________
Installation
_____________
____ terminating resistors
EMK 03
_____________
Subtotal
_____________
____ terminating resistors
ERA 14
_____________
VAT
_____________
____ DC blocker(s)
EMU 12
_____________
____ m coaxial cable(s)
LCD ...
_____________
Total price
_____________
____ antenna socket(s)
ESU 31/32
_____________
____ connection cable(s)
EVL 165
_____________
*) For reception of digital programmes, a DVB-S receiver is required.
**) Voltage surge protector KAZ 11.
***) For multifeed reception, Kathrein recommends using a reflector with a diameter of 90 cm or larger.
22
Connection diagrams for the receivers
Connection diagram for a DVB receiver (with hard disk) connected to a TV set, Dolby surround sound system, video
recorder and hi-fi system.
Connection diagram for a DVB receiver connected to a
TV set, video recorder and hi-fi system.
or
or
DVB-S receiver
UFD 554, UFD 554/S
DVB receiver UFD 515
Digital
sound
Video recorder
Dolby
surround
sound
system
Connection diagram for an analogue receiver connected to a
TV set (without Scart connector), video recorder and hi-fi system.
Hi-fi
Video recorder
Connection diagram of a twin receiver connected to a TV set,
video recorder and hi-fi system.
or
or
Analogue receiver
UFD 400
Analogue
twin receiver
UFD 420
Hi-fi
Video recorder
Hi-fi
Video recorder
23
Head office / National sales offices / Service centres /Customer service
Head office
83022 Rosenheim
KATHREIN-Werke KG
Anton-Kathrein-Str. 1-3
Tel. ++49 8031/184-0
Fax ++49 8031/184-306
Internet: http://www.kathrein.de
National sales offices
89075 Ulm
KATHREINVertriebszentrum Süd
Eberhard-Finckh-Str. 57
79108 Freiburg
KATHREINNiederlassung
Mitscherlichstraße 8
90451 Nürnberg
KATHREINNiederlassung
Donaustraße 36
64521 Groß-Gerau
(Frankfurt)
KATHREINVertriebszentrum West
Wasserweg 19
21035 Hamburg
KATHREINVertriebszentrum Nord
Hermann-Wüsthof-Ring 12
09241 Mühlau
KATHREIN Sachsen GmbH
Niederlassung
Lindenstraße 3
12099 Berlin-Tempelhof
ALFRED KNITTER GmbH
Niederlassung
Colditzstraße 28
Tel. ++49 7 31/9 27 67-0
Fax ++49 7 31/9 27 67 22
E-mail: vzs.ulm@kathrein.de
Tel. ++49 7 61/50 31 93
Fax ++49 7 61/50 31 94 1
E-mail: nl.freiburg@kathrein.de
Tel. ++49 9 11/64 54 30
Fax ++49 9 11/64 45 13
E-mail: nl.nuernberg@kathrein.de
Tel. ++49 61 52/95 96-0
Fax ++49 61 52/95 96-34
E-mail: vzw.frankfurt@kathrein.de
Tel. ++49 40/73 47 55-0
Fax ++49 40/73 47 10 74
E-mail: vzn.hamburg@kathrein.de
Tel. ++49 37 22/60 73-0
Fax ++49 37 22/60 73-99
E-mail: nl.sachsen@kathrein.de
Tel. ++49 30/75 68 06-0
Fax ++49 30/75 68 06-44
E-mail: nl.berlin@kathrein.de
Service centre in Germany
83224 Grassau
ESC Elektronik Service
Chiemgau GmbH
Bahnhofstraße 108
Tel. ++49 86 41 / 95 45-0
Fax ++49 86 41 / 95 45 35 + 95 45 36
E-mail: service@esc-kathrein.de
Internet: http://www.esc-kathrein.de
09241 Mühlau
KATHREIN-Burgstädt GmbH
Lindenstraße 3
Tel. ++49 37 22 / 60 73-31
Fax ++49 37 22 / 60 73-18
E-mail: t.funke@kathrein-burgstaedt.de
Customer service centre
KATHREIN-Werke KG
Tel. ++49 80 31/184-700
Fax: ++49 80 31/184-676
E-mail:
technische-kandenberatung@kathrein.de
9987-057/5/0103/TN/Pf
83004 Rosenheim
For customers abroad:
Please contact our national representative for
technical advice and repair.
Internet: http//www.kathrein.de
KATHREIN-Werke KG · Telephone ++49 (80 31) 184-0 · Fax ++49 (80 31) 184-306
Anton-Kathrein-Straße 1-3
·
Postfach 100 444
·
D-83004 Rosenheim
Technical data subject to change.
Regional repair centre (for new German Federal States)
Antennen · Electronic