Information for your
Installer
Riva Classic Furniture
Range
Version : 2.0
Date : 1st November 2012
Contents
1 - Message to Homeowner
2 - Product Selector
- Identify product to be installed
3 - Installation Location
- Your Special Installation Instructions
- Clearance Guideline
Message to
Homeowner
Product
Selector
Installation
Location
4 - Site Preparation
5 - General Installation Information
- Product Installation
- Plumbing Installation
- Drawer Installation
- Leg Attachment
6 - Product Specifications
- Basin Specifications
- Furniture Specifications
Site
Preparation
General Installation
Information
Product
Specification
1
2
3
4
5
6
Message to
Homeowner
IMPORTANT
PLEASE READ THIS IF YOU ARE THE HOMEOWNER
Thank you for choosing St Michel bathroom furniture. We are here to help you to achieve the
outcomes you want so we’d like to offer you some guidance around the installation process.
Planning this and ensuring the correct guidelines are followed is not only vital to ensuring
you’re happy with the end result and that the bathroom is properly functional and will stand
the test of time. It will also make the process as smooth as possible by minimising the
possibility of any misunderstandings and installation mistakes by your builder or plumber.
Your role in the project
We understand that creating or upgrading your bathroom is not a simple matter and that
you’ll need to rely on professional tradespeople. That said, it’s important you take an active
role in over-seeing the project.
Please read the guideline overview on the next page. This will ensure you provide your
installer with the information required so he/she:
1.
Properly understands your desired bathroom layout.
2.
Understands that you expect your furniture to be installed to St Michel’s
guidelines.
Ensuring your bathroom is covered by our warranty
Another reason to ensure your installation professional follows our guidelines, is not doing so
could affect your warranty cover should anything go wrong now or in the future.
06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
1
Message to
Homeowner
IMPORTANT
PLEASE READ THIS IF YOU ARE THE HOMEOWNER
Guideline Overview
Section 2
Product Selector
Tick your chosen furniture. Give this section to your installer so they know what product you
have selected and its exact specifications.
Section 3
Installation Location
Identifying the installation location sounds simple, but in homes with multiple bathrooms it
pays to be very clear. Don’t forget to add your special installation preferences before giving
this to your installer.
Section 4
Site Preparation
This is a set of site preparation instructions for your builder, but you should read it too.
Discuss the three points on this document to make sure you both agree exactly what is to
be done. Pay particular attention to the height level and wall support information.
Section 5
General Installation Information
This includes installation information for both your Builder and your Plumber as they will split
the tasks on the job - plumbers take varying degrees of involvement in product installations.
Make it very clear to both of them that points 1-8 must be followed to the letter.
Section 6
Specifications
General product specifications - while not necessary for installation this information could be
useful to your installer, so it doesn’t hurt to provide this as well.
06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
1
Riva Classic
Riva Classic
Product Selector
Use the following charts to identify what product you
intend to install. This will help your installer in the
planning phase.
Product
Selector
2
2
Riva Classic 1200 Wall 2dr Product
1
Selector
Riva Classic 750 Wall 2dr
Riva Classic
Identify which cabinet you chose
750
900
1200
1200DB
Classic Wall 750 - 1 Drawer
Classic Wall 900 - 1 Drawer
Classic Wall 1200 - 1 Drawer
Riva Classic 900 Legs 2dr
double
Acrylic
W 750
H 450
D 460
Acrylic
W 900
H 450
D 460
Acrylic
W 1200
Ceramic W 755
H 430
D 460
Ceramic W 915
H 430
D 460
Ceramic W 1210
H 450
Classic Wall 1200 - 1 Drawer
D 460
Riva Classic 1200 Legs 2dr
H 430
D 460
Ceramic W 1210
H 430
D 460
Riva Classic 750 Legs 2dr
Riva Classic 900 Floor 2dr
Ri
double
Classic Wall 750 - 2 Drawer
Acrylic
Classic Wall 900 - 2 Drawer
Classic Wall 1200 - 2 Drawer
W 750
H 700
D 460
Acrylic
W 900
H 700
D 460
Acrylic
W 1200
Ceramic W 755
H 680
D 460
Ceramic W 915
H 680
D 460
Ceramic W 1210
H 700
Classic Wall 1200 - 2 Drawer
D 460
Riva
Classic
1200 Floor
2dr
Ceramic W
H 680
D 460
1210
H 680
D 460
Riva Classic 750 Floor 2dr
Riva Classic 900 Wall 1dr-Lft
Riva Classic 900 Wall 2dr-Lft
Riva Classic 900 Legs
double
Classic Floor 750 - 2 Drawer (legs)
Classic Floor 900 - 2 Drawer (legs)
Classic Floor 1200 - 2 Drawer (legs)
Acrylic
W 750
H 850
D 460
Acrylic
W 900
H 850
D 460
Acrylic
W 1200
H 850
D 460
Ceramic W 755
H 830
D 460
Ceramic W 915
H 830
D 460
Ceramic W 1210
H 830
D 460
Classic Floor 1200 - 2 Drawer (legs)
Ceramic W 1210
H 830
D 460
double
Classic Floor 750 - 2 Drawer
Acrylic
Classic Floor 900 - 2 Drawer
Classic Floor 1200 - 2 Drawer
Classic Floor 1200 - 2 Drawer
W 750
H 850
D 460
Acrylic
W 900
H 850
D 460
Acrylic
W 1200
H 850
D 460
Ceramic W 755
H 830
D 460
Ceramic W 915
H 830
D 460
Ceramic W 1210
H 830
D 460
Ceramic W 1210
H 830
D 460
Off-set basins (left)
left side basin
left side basin
left side basin
Classic Wall 900L - 1 Drawer
Classic Wall 900L - 2 Drawer
Classic Floor 900L - 2 Drawer (legs)
Classic Floor 900L - 2 Drawer
Ceramic W 915
Ceramic W 915
Ceramic W 915
H 430
D 460
Ceramic W 915
H 680
D 460
left side basin
H 830
D 460
H 830
D 460
2
1500
1500DB
Identify which cabinet colour you chose
Durashell
double
Classic Wall 1500 - 2 Drawer
Classic Wall 1500 - 2 Drawer
Mineral Cast
Mineral Cast
W 1500
H 450
2
Product
Selector
Riva Classic
D 460
W 1500
Riva Classic 1500 Legs 4dr
H 450
White
Low Sheen
White
Gloss
Upgrade
Dark
Oak
Ebony
Oak
Charred
Oak
Greyed
Oak
Light
Oak
Washed
Oak
Zebrano
Basalt
Dune
Cape
Cod
Woodgrain
D 460
Riva Classic 1500 Legs 4dr-Dbl
double
Classic Wall 1500 - 4 Drawer
Classic Wall 1500 - 4 Drawer
Mineral Cast
Mineral Cast
W 1500
H 700
D 460
W 1500
H 700
3
Identify which bottom drawer option you
chose
D 460
UÊ Standard Supply chosen
Riva Classic 1500 Floor 4dr-Dbl
(Drawings below show Standard Supply)
Riva Classic 1500 Floor 4dr
Floor Legs
Wall Hung
œ`iÊ
­LœÌ̜“Ê`À>ÜiÀʘœÌÊÃՈÌ>LiÊvœÀÊyœœÀÊ«Õ“Lˆ˜}®
A
Riva Classic 900 Wall 1dr-Rgt
Floor Plinth
double
Classic Floor 1500 - 4 Drawer (legs)
Classic Floor 1500 - 4 Drawer (legs)
Mineral Cast
Mineral Cast
W 1500
H 850
D 460
W 1500
H 850
Riva Classic 900 Legs 2dr-Rgt
œ`iÊ
Riva Classic 900 Wall 2dr-Rgt
­LœÌ̜“Ê`À>ÜiÀʓœ`ˆwi`ÊvœÀÊyœœÀÊ«Õ“Lˆ˜}®
D 460
B
OR
UÊ Special Non-Standard Bottom drawer chosen
­i°}Ê7>‡…Õ˜}ÊÓ,Ê
>Lˆ˜iÌ]ʈvÊÃiiVÌi`ÊÜˆÌ…Ê œ˜‡-Ì>˜`>À`ʼœ`iÊ½ÊÊÊÊÊ
ÊÀ>ÜiÀÊܜՏ`ÊLiÊ œ˜‡-Ì>˜`>À`ʜ«Ìˆœ˜°®
Ê Êœ`iÊÊ­-iiÊ>LœÛi®
ÊÊÊʜ`iÊÊ­-iiÊ>LœÛi®
4
double
Classic Floor 1500 - 4 Drawer
Classic Floor 1500 - 4 Drawer
Mineral Cast
Mineral Cast
W 1500
H 850
D 460
W 1500
H 850
Features
UÊ-œvÌVœÃiʈÃÊÃÌ>˜`>À`ʜ˜Ê>Ê`À>ÜiÀÃ
UÊÕÃÜʅ>˜`iÃÊÃÕ««ˆi`Ê>ÀiÊÀˆ}…ÌÊ
Àœ“i]Ê->̈˜Ê
Àœ“iÊ>Û>ˆ>Liʜ˜ÊÀiµÕiÃÌ
D 460
5
Upgrades
Riva Classic Gloss Upgrade
502
Gloss Upgrade
Off-set basins (right)
right side basin
right side basin
Classic Wall 900R - 1 Drawer
Ceramic W 915
H 430
right side basin
Classic Wall 900R - 2 Drawer
D 460
Ceramic W 915
H 680
D 460
right side basin
Classic Floor 900R - 2 Drawer (legs)
Classic Floor 900R - 2 Drawer
Ceramic W 915
Ceramic W 915
H 830
D 460
H 830
D 460
Riv
Installation
Location
1 Identify the room your product should be installed
Identify Room here
2 Your Special Instructions to the installer
SOME EXAMPLES OF SPECIAL INSTRUCTIONS YOU MAY WANT TO CONSIDER
Vanities
Side Furniture
Mirrors and Lighting
State preferred height of wall mounted
vanity.
Consider finished height of low furniture.
Mirror height : Consider all user heights.
Do you want a side ‘packer’ installed
between the vanity and wall?
Allowing for power inside side storage?
Opening and closing mirror cabinet
doors must clear tapware.
Special waste overflow upgrade.
Install on correct side of vanity.
Offset a recessed mirror at least 20mm
off wall to easily open doors.
Ensure plumbing position(s) suit vanity
configuration.
Side furniture door should open away
from vanity. i.e. Easy access.
Allowing for power inside cabinet?
Install clear distance to protect from
shower spray.
Are you recessing side furniture into
wall? Preferred depth?
Power for lights, demister pads and preferred
switch positions.
Are you installing a towel rail on the
vanity?
Height off floor for tall furniture.
Solo mirrors can be mounted portrait
or landscape.
In all cases above consider the Clearance Guide over the page.
YOUR INSTALLATION INSTRUCTIONS :
3
Installation
Location
Clearance
Guidelines
The following guide will assist you in planning your new bathroom
•
These Bathroom Clearance Guidelines will help you create a practical working space that maximises the potential of
the room you have to work with. By using these measurements you can determine the best furniture, shower, bath
and fixture combination for your bathroom.
Mirror
Dimension
900mm high
Mirror
Cabinet
Dimension
740mm high
Mirror Dimension
700mm high
1050mm
1150mm
1200mm
Average fixing heights are supplied, adjust for personal preference
CAUTION: Mirror Cabinet doors need to clear tapware, consider if mounting lower.
3
A
B
A Clearance Wall to Toilet Pan
C
B Edge of Bath/Vanity to Centre Toilet Pan
- 750mm to 1200mm
- 900mm most practical
- 400mm to 500mm
- 500mm most practical
3
WALL
WALL
WALL
Bath or Vanity
Installation
Location
D
D Clearance Wall to Basin/Vanity
- 750mm to 900mm
- 900mm most practical
C Clearance Wall to Centre Pan
- 400mm to 500mm
- 500mm most practical
Remember
Allow space on wall
for towel rails
200mm
G
E
DOOR
F
E Clearance Toilet Pan to Basin/Vanity
- 750mm to 900mm
- 900mm most practical
F Clearance Bath to Basin/Vanity
- 750mm to 900mm
- 900mm most practical
G Bathroom Access
- 750mm to 900mm
- 750mm minimum between fixture(s) for
good bathroom access
J
K
H
I
J Wall Hung Vanities
H Clearance Bath to Vanity
- average 870mm
- adjust for height preference
- 150mm to 300mm
- 300mm most practical
K Side Furniture
- average 200mm
- adjust for height preference
I Clearance Vanity to Side Furniture
- 75mm to 150mm
- 100mm most practical
For addition planning information see www.stmichel.co.nz
Site
Preparation
PLANNING : SITE PREPARATION AND PLUMBING
IMPORTANT: PLEASE READ PRIOR TO INSTALLATION
POSITIONING
1
FURNITURE POSITION IS IMPORTANT
H - 50mm to 150mm
I - 150mm to 300mm
NOTE : Do not expose furniture to shower spray - A good
quality shower screen must be fitted to the bath or shower
to keep the furniture dry and to prevent water damage.
I
H
When deciding on the position of the furniture, be sure to
arrange the product at least 150mm from any wet areas
such as baths, spas and showers. Ensure that the floor
is level (floor mounted) and that the wall is straight and
plumb.
CHECK LEVELS
2
CHECK FOR PLUMB WALLS AND LEVEL FLOOR
Walls
When installing a vanity (furniture) to a wall, it is essential
that the wall is plumb and straight. If it is not possible to
make the wall plumb and straight you must pack the
vanity out so that it does not follow the out of aligned wall.
WARNING : Fixing the vanity on a wall that is not plumb
and straight will result in the following :
- Cabinet will sag as illustrated.
- Cabinet will twist out of alignment and not be plumb.
Horizontal - Wall NOT straight
Fixing
Points
Centre divider
Will result in
‘Sagging’
Front
corner
lift
Front
corner
lift
Centre
drop
Plan view
- Drawers will not function as designed. i.e. They will
appear racked, will not run correctly or smoothly and if
self-closing, will not close on their own.
- Doors will not align or be able to be adjusted to align.
- Vanity/basin will appear to have an accentuated twist.
Floor
Plumb Wall
Vertical - Wall NOT straight
Out of Plumb Wall
As with wall hung vanities, floor standing vanities must sit
on a level floor or be packed so they sit level and true.
WARNING : Fixing a vanity to a floor that is not level will
result in the same adverse symptoms that appear with
Drawers/Doors and Vanity.
Levelling
Support
Side view
FRAMING
3
SUPPORT NOGS
STUD
STUD
STUD
Wall hung furniture and VC basins that require wall fixing
- SUPPORT NOG
Recommended
2- 150 x 50
900
Support nogs are to be fitted between the studs, as
detailed, to give a solid wall backing to attach the vanity.
Fix the top nog at 900mm above the floor and ensure
the total width exceeds the vanity width.
Floor Level
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
4
General Installation
Information
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ PRIOR TO INSTALLATION
1 We recommend that a qualified, licensed tradesperson install this vanity and we would expect the installation to be
undertaken in a tradesman like manner and finished to a tradesman standard.
2 This product carries a full warranty against faulty workmanship and materials. Please inspect thoroughly before installation to
ensure that the unit has not been damaged in transit.
3 Ensure that the water temperature does not exceed 55˚C for safety and to avoid possible damage to your vanity basin.
CABINET
4
WALL HUNG & FLOOR STANDING FURNITURE
Remove the doors and/or drawers to provide access to the
inside rear wall of the cabinet (note that all hinges are quick
release for easy removal).
For wall hung vanities - mark the position of the top of the
vanity. The work surface would typically be set at a height
of 850mm to 900mm. If the top (basin) is packed separately
deduct the thickness of the top from the finished height to
determine the correct height for the top of the cabinet.
Drill holes for plumbing in the back panel or base of the
cabinet with an appropriate sized hole saw.
WARNING : Do not secure the unit to the wall until the vanity
is sitting level, plumb and square. Use suitable packing to
achieve this if the wall cannot be aligned.
Position unit and check that it is sitting level, plumb and
square.
Screw Fixing : For wall hung vanities.
Fixings must be into solid timber and must be no more than
50mm from each side of the cabinet.
The installer must provide additional fixing points evenly
spread at approximately 250mm centres along the top of
the back panel.
50
max.
250
CL
approx.
250
approx.
50
max.
850
to
900
NOTE : Double fixings each side.
5
Floor standing vanities should, likewise, be checked for
sitting level, plumb and square and suitably packed to
achieve this.
Screw fix to the wall to secure either through the back rail
or back panel.
TOPS
FITTING TOPS TO FURNITURE
Acrylic & Mineral Cast Tops
If the top is not attached to the cabinet, fit the taps and
waste then glue it to the top of the cabinet with a continuous
bead of Expandite SB adhesive, Panel Bond or something
similar.
Ceramic & Ceramic Quartz Tops
During the complex manufacturing process ceramic tops
shrink considerably and can be slightly uneven. It is
recommended that the top be fixed to the cabinet with
a continuous bead of silicone so the top will not rock or
move. Apply the silicone to the top edges of the cabinet
then postion the top. If the cabinet is wall hung then the
ceramic top should also be fixed to the solid timber in the
wall with the fasteners packed with the top.
NOTE : Not all ceramic tops are designed to be wall fixed.
11/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
5
General Installation
Information
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ PRIOR TO INSTALLATION
6
WASTE
FITTING WASTE CORRECTLY
Align slots with
basins internal
holes.
7
In a ceramic basin, hand tighten the waste - do not
overtighten or the basin may be damaged. Use suitable
overflow waste and align the slots with the internal holes in
the basin and ensure that no excess silicone or putty is
obstructing the water flow.
SEALING
Materials used for the construction of this unit are water
resistant and not waterproof. A bead of sealant (specifically
formulated for bathrooms) must be used to seal all edges
where water penetration can occur. i.e. Between the
cabinet and the wall and the floor, between the vanity top
and the top edge of the cabinet and between a vessel
basin and the top surface.Take care to dry any spillage or
leakage of water onto or into the cabinet during installation.
8 HINGE ADJUSTMENT
It is the responsibility of the installer to make any
adjustments to align doors after installation if required.
St Michel use clip hinges which require only light finger
pressure to clip into place and allow the doors to be easily
removed for access to plumbing fittings.
DOOR ALIGNMENT
Your doors have been adjusted in the factory on a level
surface to achieve matching height, equal gap and surface
alignment. Before you adjust the doors, ensure again that
the vanity is level and true and not twisted. When level, if the
doors still do not align, adjustment can be made to the
hinges as follows:
A. SIDE ADJUSTMENT
To move the doors sideays in total or to level each door, turn screw A clockwise or anti-clockwise.
B. DEPTH ADJUSTMENT
To move the door inward or outward from the carcass - loosen the hinge arm fastening screw B and slide in the direction you
want to go. Retighten hinge arm fastening screw B.
C. HEIGHT ADJUSTMENT
Loosen the top and bottom screw C on each mount plate, adjust and retighten.
IMPORTANT WARRANTY NOTICE
Please note that in the event that the vanity is not installed in accordance with these instructions the St Michel warranty may
be voided. Any modifications to the product will void any warranty.
Please ensure that the Warranty and Conditions of Use card is left in the cabinet for the homeowner.
11/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
5
General Installation
Information
RIVA CLASSIC
Please note: With wall hung vanities, we suggest you adjust the measurements to suit your individual height preference.
100
F
A
100
Wall Hung
F
B
B
C
D
D
Wall Hung
A
C
Floor
E
E
Finished Floor Level
CL
CL
Right Side Basin
Left Side Basin
Riva Classic 1200 & 1500 Dbl
100
Wall Hung
100
F
B
Wall Hung
D
Floor
100
F
A
B
C
D
E
A
C
E
Finished Floor Level
CL
(Basin Top)
(Cabinet
Height)
B
C
D
E
F
Acrylic & M/Cast Palo
830
800
630
560
110
Ceramic Rubik
820
800
590
530
CL Basin
CL Basin
Ceramic Rubik Left & Right 820
800
590
530
345
110
800
630
560
750
110
590
530
585
110
Description
Basin Size
Basin Type
Riva Classic
Single 750,900,1200,1500
Riva Classic
Single 750,900,1200
Riva Classic
Single 900L,900R
Riva Classic
Double 1500
Riva Classic
M/Cast Palo 1500
Ceramic Rubik 1200
Double 1200
A
830
820
800
110
If you increase or decrease height of basin (i.e. dimension A)
then C + D dimensions must be amended accordingly.
Standard Supply
Tap Hole
1
Colour
White
Integral Overflow
Rubik Yes / Palo Optional
F measurement is bottom of basin outlet to centre of wall waste
pipe - if another waste trap is used, you will have to confirm F
measurement suits or adjust accordingly.
NOTE: Waste outlet positioned for standard chrome bottletrap
and pop-up basin waste.
All dimensions are in millimetres nominal. St Michel Industries Ltd has the right to change product and specifications without notice. 11/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
5
General Installation
Information
DRAWER BOX
INSTALLATION INSTRUCTIONS
(RUNNER MODEL S10 400-H)
FRONT LEVER LATCH
Drawer adjustment
Located under & at the front of drawer box on the left and right
side.
Front lever latch
DRAWER ADJUSTMENT
Each lever latch has drawer adjustment devices. As shown
above, push down on the adjustment lever and push around
until adjustment is satisfactory.The adjustment will tilt the
drawer front vertically forward or backwards but will not adjust
the drawer horizontally.
REMOVING DRAWER
Pull out towards
the side of the
drawer box
Drawers are easily removed by depressing the two lever latches
positioned on the left and right side behind and under the
drawer front. While depressing the levers, simply slide the
drawer box out to remove.
INSERTING DRAWER
To re-insert the drawer, first push the runners back into the
cabinet and then slide the drawer on top of the runners back
into the closed position. You will hear 3 “clicks” when the
drawer reaches its final position, which tells you the front latches
are engaged.
CHECKING RUNNERS
If you think the runner is not fully engaged, you can check by
sliding the drawer out enough so you can grasp both runners
and with your body push the drawer front back into the runner
until it clicks.
REAR PINS
Rear pins are at the back of the runner and clip into each side
of the drawer box.
Rear pin before
located into the back
of the drawer box.
Rear pin located into
the back of the
drawer box.
06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
5
General Installation
Information
LEG ATTACHMENT INSTRUCTIONS
ENDEAVOUR LEG
Draw or Door Front
2mm
Please use screws supplied by St Michel
when fixing legs to the cabinet. We
recommend pre- drilling with a 3mm
pilot hole.
The Legs base plate is placed
2mm in from the out side edges
of the cabinet.
2mm
2mm
Cabinet Back
NOTE: When skirting is present, legs located on the back of the cabinet may need to be repositioned inward to allow the back of the cabinet to lay flat with the wall.
06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
5
Product
Specifications
RUBIK BASIN
CERAMIC CONSOLE BASIN
Rubik
A
B
C
D
E
F
G
Rubik 600
600
460
390
80
440
115
270
Rubik 750
755
460
390
155
450
115
270
Rubik 900
915
460
390
210
490
115
270
Rubik 900 L/H
915
460
390
310
490
115
270
Rubik 900 R/H
915
460
390
310
490
115
270
Rubik 1200
1210
460
390
350
490
115
270
Rubik 1200 Dbl
1210
460
385
110
415
115
270
Description
A
D
A
E
D
(Bowl length)
85
E
D
(Bowl length)
F
B
C
F
B
G
C
G
(Bowl Width)
(Bowl Width)
A
D
E
(Bowl length)
170
E
(Bowl length)
D
F
B
C
G
(Bowl Width)
Standard Tap Size
35 mm
Standard Waste Size
32 mm
Basin Depth
130 mm
Depth to Overflow
100 mm
All dimensions are in millimetres nominal. 06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
6
Product
Specifications
PALO BASIN
ACRYLIC CONSOLE BASIN
Palo
Description
A
B
C
D
E
F
G
Palo 750
750
460
420
115
510
120
300
Palo 900
900
460
420
190
510
120
300
Palo 1200
1200
460
420
340
510
120
300
A
D
E
(Bowl length)
D
F
B
C
G
(Bowl Width)
Standard Tap Size
35 mm
Standard Waste Size
32 mm
Basin Depth
140 mm
Depth to Overflow
N/A
All dimensions are in millimetres nominal. 06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
6
Product
Specifications
PALO BASIN
MINERAL CAST CONSOLE BASIN
Palo
Description
A
B
C
D
E
F
G
Palo 1500
1500
455
415
495
515
115
300
Palo 1500 Dbl
1500
455
415
115
515
115
300
D
E
(Bowl length)
A
230
E
(Bowl length)
D
F
B
C
G
(Bowl Width)
Standard Tap Size
35 mm
Standard Waste Size
32 mm
Basin Depth
135 mm
Depth to Overflow
Optional 80 mm
All dimensions are in millimetres nominal. 06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
6
Product
Specifications
RIVA CLASSIC
Riva Classic (Acrylic)
Description
A
B
C
D
E
750
460
450
730
450
Riva Classic Wall 750 2dr
750
460
700
730
450
Riva Classic Floor 750 2dr (incl. Legs)
750
460
850
730
450
Riva Classic Wall 900 1dr
900
460
450
880
450
Riva Classic Wall 900 2dr
900
460
700
880
450
Riva Classic Floor 900 2dr (incl. Legs)
900
460
850
880
450
Riva Classic Wall 1200 1dr
1200
460
450
1180
450
Riva Classic Wall 1200 2dr
1200
460
700
1180
450
Riva Classic Floor 1200 2dr (incl. Legs)
1200
460
850
1180
450
Riva Classic Wall 750 1dr
Riva Classic (Ceramic)
Description
A
B
C
D
E
755
460
430
735
450
Riva Classic Wall 750 2dr
755
460
680
735
450
Riva Classic Floor 750 2dr (incl. Legs)
755
460
830
735
450
Riva Classic Wall 900 1dr (incl. Offset models)
915
460
430
895
450
Riva Classic Wall 900 2dr (incl. Offset models)
Riva Classic Wall 750 1dr
915
460
680
895
450
Riva Classic Floor 900 2dr (incl. Legs & Offset models) 915
460
830
895
450
Riva Classic Wall 1200 1dr (incl. Doubles)
1210
460
430
1190
450
Riva Classic Wall 1200 2dr (incl. Doubles)
1210
460
680
1190
450
Riva Classic Floor 1200 2dr (incl. Legs & Doubles)
1210
460
830
1190
450
Riva Classic (Mineral Cast)
Description
A
B
C
D
E
Riva Classic Wall 1500 2dr (incl. Doubles)
1500
460
450
1480
450
Riva Classic Wall 1500 4dr (incl. Doubles)
1500
460
700
1480
450
Riva Classic Floor 1500 4dr (incl. Legs & Doubles)
1500
460
850
1480
450
B
A
A
B
C
(Wall Hung)
C
(Wall Hung)
D
E
Front View
Side View
C
(Floor)
D
E
Front View
Side View
All dimensions are in millimetres nominal. 06/12
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
6