105
REFERENCES
1. Alexandrovitz.A and Katz.D (1982), “Analysis of transient phenomena in threephase induction motor represented in phase axes by digital simulation”, Electric
Machines Electromechanical, vol. 17, pp. 305–324.
2. Alghuwainem.S.M (1998), “Steady-state analysis of an induction generator self
excited by a capacitor in parallel with saturable reactor”, Electric Machines Power
Systems, vol. 26,pp. 617–625.
3. Alghuwainem.S.M (1999), “Steady-state analysis of an isolated self excited
induction generator driven by regulated and unregulated turbines”, IEEE
Transactions Energy Conversion, vol. 14,pp. 718–723.
4. Ali Ozturk and KenanDosoglu (2010), “Investigation of the Control Voltage and
Reactive Power in Wind Farm Load Bus by STATCOM and SVC”,IEEEScientific
Research and Essays, Vol. 5.
5. Al-Jabri.A and Alolah.A.I (1990), “Limits on the performance of the three-phase
self excited induction generators”, IEEE Transactions Energy Conversion, vol.
5,pp.113–131.
6. Al-Jabri.A (1990),“Direct evaluation of output frequency and magnetizing
reactance of three-phase isolated self-excited induction generators”, IEEE
Transactions Energy Conversion, vol. 5, pp. 350–357.
7. Allirani.S and Jagannathan.V (2010), “High Performance Direct Torque Control of
Induction Motor Drives Using Space Vector Modulation” IJCSI International
Journal of Computer Science Issues, Vol. 7, Issue 6.
8. Ammasaigounden.N, Subbiah.M and Krishnamurthy.M.R (1986),“Wind driven
self-excited pole changing induction generators”, IEEE Proceedings Electric
Power Applications Vol. 26,pp. 617–625.
9. Barkle.J.E and Ferguson.R.W (1954), “Induction generator theory and
application”, IEEE Transactions (Electrical Engg.), vol. 73,pp.12–19.
10. Basset.E.D and Potter.F.M (1935), “Capacitive excitation for induction generator”,
AIEE Transactions (Electrical Engg.), vol. 54,pp.540–545.
106
11. Ben Attous.D and Bekakra.Y (2010), “Speed Control of a Doubly Fed Induction
Motor using Fuzzy Logic Techniques”, International Journal on Electrical
Engineering and Informatics in Volume 2, Number 3.
12. Ben HamedMouna and SbitaLassaad (2006), “Direct Stator Field Oriented Control
of Speed Sensorless Induction Motor”, IEEE Transactions Vol.3, pp. 42-50.
13. Betin.F, Sivert.A, Yazidi.A, and Capolino.G (2007), “Determination of scaling
factors for fuzzy logic control using the sliding-mode approach”, Application to
control of a DC machine drive in the IEEE Transation Indian Electronics, vol.54,
pp. 296–309.
14. Bim.E, Szajner.J and Burian.Y (1995), “Voltage compensation of an induction
generator with long shunt connection”, IEEE Transactions Energy Conversion 10,
vol. 3, pp. 305–313.
15. Bonert.R and Hoops.G (1990), “Stand alone induction generator with terminal
impedance controller and no turbibe controls”, IEEE Trans. Energy Conversion,
Vol.5,pp.28–31.
16. Bonert.R and Rajakaruna.S (1998), “Self excited generator with excellent voltage
and frequency control”, IEE Proc. Generation, Transmission and Distribution,vol.
145,pp. 33–39.
17. Brennen.M.B, Abbandanti.A (1977), “Static exciters for induction generators”,
IEEE Transactions Industrial Applications,vol. 13, pp. 422–428.
18. Chan.T.F (1993), “Capacitance requirements of self excited induction Generators”,
IEEE Transactions Energy Conversion, vol. 8, pp. 304–311.
19. Chan.T.F (1994), “Steady-state analysis of self-excited induction generator”, IEEE
Transactions on Energy Conversion, vol. 9, pp. 288–296.
20. Chan.T.F (1996), “Self-regulated induction generators driven by regulated and
unregulated turbines”, IEEE Transactions Energy Conversion, vol. 11, pp. 338–
343.
21. Chandra Sekhar.T and Bishnu.P. Muni (2004), “Voltage regulation of the reactive
current need to be changed suitably during load variation from no load to full
load”, IEEE Transaction on Analog and digital techniques in electrical
engineering, vol. 3,pp. 460-463.
107
22. Chen.X.S, Flechsig.A.J and Pang.C.W (1991), “Simple method for steady state
analysis of an isolated self excited Induction generator which eliminates the long
and tedious derivation of equations”, Advances in Power System Control,
Operation and Management, pp. 720-726.
23. Chen.X.S, Flechsig.A.J, Pang.C.W and Jhuang.L.M (1991), “Digital Modelling of
an Induction Generator”, in Proceedings of the IEEE International Conference on
Advances in Power System Control, Operation and Management, IEE Hong Kong
Centre, pp. 720–726.
24. Chintan Patel and RijilRamchand (2010),“Vector Control for IM Drives Using
Current Error Space Phasor Based Hysteresis Controller without Speed Sensor” in
the NPEC.
25. Colak.I, Garvey.S.D and Wright.M.T (1995), “Simulation of induction machines
using phase variables and explicit inverse inductance matrix”, International
Journal of Electrical Engineering Education, vol. 32,pp. 354–365.
26. Demellow.F.P and Walsh.G.W (1961), “Reclosing transients in induction motors
with terminal capacitors”, AIEE Transactions (Electrical Engg.), vol.80,pp. 1206–
1213.
27. Demoulias.C.S and Dokopoulos.P.S (1990), “Transient behavior and self
excitation of wind driven induction generators after its disconnection from the
power grid”, IEEE Transaction on Energy Conversion, vol. 5, pp. 272–278.
28. Demoulias.C.S and Dokopoulos.P.S (1996), Electrical transients of wind turbines
in a small power grid, IEEE Transactions Energy Conversion, vol. 11, pp. 636–
642.
29. DeOdiveira.S.E.M (1986), “Starting transients of saturated induction motors with
capacitors on supply”, IEEE Transactions Energy Conversion, vol. 1,pp. 205–210.
30. Donescu.V, Charelte.A, Yao.Z,Rajagopalan.V (1999), “Modelling and simulation
of saturated induction motors in phase quantities”, IEEE Transaction Energy
Conversion, vol. 14, pp. 386–393.
31. Elder.J.M,Boys.J.T and Woodward.J.L (1983), “The process of self excitation in
induction generators”, IEEE Proceedings Electric Power Application, vol.130, pp.
103–108.
108
32. Elder.J.M,Boys.J.T and Woodward.J.L (1984), “Self excited induction generator
as a small low cost generator”, IEEE Proceedings of Generation, Transmission and
Distribution, vol. 131, pp. 3–40.
33. Elder.J.M,Boys.J.T and Woodward.J.L (1985), “Integral cycle control of stand
alone generators”, IEEE Proceedings of Generation, Transmission and
Distribution, vol. 132, pp. 57–66.
34. El-Sharkawi.M.A, Venkata.S.S,Williams.T.J and Butler.N.G (1985),“An adaptive
power factor controller for three-phase induction generators”, IEEE Transaction
Power Apparatus Systems, vol. 104, pp. 1825–1851.
35. Erisa.T, Takata.S and Ueda.R (1980), “Dynamic performance of self excited
induction generator with voltage controller”, IEEE Transaction on Industrial
Applications, Vol. 2, pp. 508–513.
36. Fossas.E and Biel.D (1980), “Sliding mode approach to robust generation on DCto-DC nonlinear converters”, Proceedings IEEE International Workshop on
Variable Structure Systems, pp. 67–71.
37. Frank.H and Landstorm.B (1971),“Power factor correction with thyristor
controlled capacitors”, ASEA vol. 44, pp. 180–184.
38. Freere.P (1991), “Electronic load/excitation controller for a self excited squirrel
cage generator micro hydro scheme”, IEEE Conference, Paper 24, pp. 266–270.
39. Grantham.C.G,Sutanto.D,Mismail.B (1989), “Steady-state and transient analysis
of self excited induction generator”, IEEE Proceedings on Electric Power
Application,vol. 136, pp. 61–68.
40. Hallenius.K.E,Vas.P, and Brown.J.E (1997), “The analysis of a saturated self
excited asynchronous generator”, IEEE Transaction on Energy Conversion Vol. 6,
pp. 336–344.
41. Hammad.A.E and Mathur.R.M (1979), “A new generalized concept for the design
of thyristor phase controlled VAR compensator”, IEEE Transaction Power
Apparatus System, vol. 98, pp. 219–231.
42. Hammons.T.J and Lai.S.C (1994), “Voltage dip due to direct connection of
induction generator in low head hydro electric systems”, IEEE Transaction on
Energy Conversion, vol. 9, pp. 460–465.
109
43. Henderson.D (1998), “An advanced electrical load governor for control of micro
hydro electric generator”, IEEE Transaction Energy Conversion, vol. 13, pp. 300–
304.
44. Jain.S.K, Sharma.J.D and Singh.S.P (2002), “Transient performance of threephase self excited induction generator during balanced and unbalanced faults”,
IEEE Proceedings of Generation, Transmission and Distribution, vol. 149, pp. 50–
57.
45. Jianye Chen, Shan Song and Zanji Wang (2006), “Analysis and Implementation of
Thyristor based STATCOM”, International Conference on Power System
Technology.
46. JonggukYim and Jong Hyeon Park (1999), “Nonlinear H infinity Control of
Robotic Manipulator” IEEE transactions.
47. Kenichi Tanaka, Toshihisa Funabashi and TomonobuSenjyu (2009), “Balancing
Control of PV Power and Dispersed Generators using H∞ Control”, IEEE
transaction on Power Electronics and Drive Systems, pp. 1068-1074.
48. Kormilo.S and Robinson.P (1984), “Electronic control of small hydroelectric
schemes using a microcomputer”, IEEE Proceedings on Part E vol. 131, pp. 132–
136.
49. Krause.P.C and Thomas.C.H (1965), “Simulation of symmetrical induction
Machinery”, IEEE Transactions Power Apparatus Systems, vol. 84, pp. 1038–
1053.
50. Kuang Li, Jinjun Liu, Zhaoan Wang, and Biao Wei (2007), “Strategies and
Operating Point Optimization of STATCOM Control for Voltage Unbalance
Mitigation in Three-Phase Three-Wire Systems”, IEEE Transactions On Power
Delivery, Vol. 22, No. 1.
51. Lee.R.J, Pillay.P,Harley.R.G (1984),“D–Q reference frames for the simulation of
induction motors”, Electric Power System, vol. 8, pp. 15-26.
52. Lehn.P.W, and Iravani.M.R (1998), “Experimental evaluation of STATCOM
closed loop dynamics”, IEEE Transactions on Power Delivery, vol.13, pp.13788498.
110
53. Levi.E and Vuckoid.V (1990), “Magnetizing curve representation methods in
digital simulation of induction machine dynamics”, International Journal of
Modelling Simulation, vol. 10, pp. 52–56.
54. Levi.E (1994), “Application of current space model in analysis of saturated
induction machine”, Electric Power Systems, vol. 31, pp. 203–216.
55. Levi.E (1995), “Modelling of saturated induction machines using flux linkages as
state variables”, Proceedings of the International Power Engineering Conference
IPEC’95, Singapore, pp. 533–538.
56. Levi.E (1995), “Analytical approach to main flux saturation modelling in d–q axis
model of induction machine”, IEEE Transaction of Energy Conversion, vol. 10,
pp. 305–313.
57. Levi.E (1997), “Impact of cross saturation on accuracy of saturated induction
machine model”, IEEE Transaction on Energy Conversion, vol. 12, pp. 211–216.
58. Levi.Y.W.E (1998), “Modelling and simulation of a stand alone induction
generator with rotor flux oriented control”, Electric Power System, vol. 46, pp.
141–150.
59. Lienhardt.A.M, Gateau.G, Meynard.T.A, and Bandyopadhyay.B (2007), “Digital
sliding-mode observer implementation using FPGA” IEEE Transaction of
IndustrialElectrononics, vol. 54, no. 4, pp. 1865–1875.
60. Lijun Hang, Sensen Liu,Zhengyu Lu and Miguel Castilla (2010), “Novel Robust
Sliding Mode Controller for Half-bridge Converter” International Power
Electronics Conference.
61. Limebeer.D.N.J and Harley.R.G (1981), “Subsynchronous resonance of single
cage induction motor”, in IEEE Proceedings of the Electric Power Applications,
vol. 128, no.1.
62. Lin.W.C, Lin.C.E,Huang.C.L, Chen.S.L and Wang.Y.T (1986), “Prediction of
transient performance of induction machine”, Electric Power Systems, vol. 10, pp.
241–246.
63. Liu Lingshun, Hu Yumen and Huang Wenxin (2005), “Optimal design of dual
stator-winding induction generator with variable speed based on improved genetic
algorithm”, IEEE transaction on Electrical Machines and Systems, Vol. 3 pp.
2343– 2348.
111
64. Liu.C.T and Chang.W.L (1992), “A generalized technique for modeling switched
controlled induction machine circuits”, IEEE Transaction of Energy Conversion,
vol. 7, pp. 168–179.
65. Liu.C.T and Chang.W.L (1995), “Transient simulation technique for studies of self
excited generator systems”, Electric Power Systems, vol. 33, pp. 101–109.
66. Loannides.M.G (1991), “Small-signal model and dynamic analysis of variable
speed induction machine wind farms”, IEEE Trans. Energy Conversion, vol. 6, pp.
56–61.
67. Loannides.M.G (1995), “A new approach for the prediction and identification of
generated harmonics by induction generators in transient State”, IEEE
Transactions of Energy Conversion, vol. 10, pp. 118–125.
68. Louze.L,Nemmour.A.L and Khezzar.A (2009), “Simple control structure based on
the sliding mode algorithm for an isolated-loaded induction generator”, IEEE
transaction, Vol.12, pp. 617-626.
69. Mahmould.A.A, Ortmeyer.T.H, Harley R.G and Calabrese.C (1980), “Effects of
reactive compensation on induction motor dynamic performance”, IEEE
Transactions on Power Apparatus Systems, vol. 99, pp. 841–846.
70. Malik.O.P, Divan.D, Murthy.S.S, Grant.T and Walsh.P (1983), “A solid state
voltage regulator for self excited induction generators”, in the Proceedings of the
IEEE Industrial and Commercial Power System Conference, Milwaukee.
71. Malik.N.H and Haque.S.E (1986), “Steady-state analysis and performance of an
isolated self excited induction generator”, IEEE Transactions on Energy
Conversion, vol. 1,pp. 134–139.
72. Malik.N.H and Mazi.A.A (1987), “Capacitance requirements for isolated self
excited induction generators”, IEEE Transactions on Energy Conversion, vol.
2,pp. 62–69.
73. MáriaImecs, CsabaSzabó and JánosJóbIncze (2007), “Stator-Field-oriented
Control of the Variable-excited Synchronous Machine”,7th International
Symposium of Hungarian Researchers on Computational Intelligence, pp. 95-106.
112
74. Mebdi T. Abolhassan, Hamid A. Toliyat and Prasad Enjeti (2003), “Stator Flux
Oriented Control of an Integrated Alternator/Active Filter for Wind Power
Applications”, IEEE Transactions.
75. Melkebeek.J.A.A and Novotny.D.W (1983),“Small signal dynamic analysis of
regeneration and self-excitation in induction machines”, Electric Machines Power
Systems, vol. 8, pp.259–280.
76. Melkebeek.J.A.A (1983), “Magnetizing field saturation and dynamic behaviour of
induction machines. Part I. Improved calculation method for induction machine
dynamics. Part II. Stability limit of voltage fed induction motor and self excited
generator”, IEEE Proceedings on Electrical Power Applications Vol. 130, pp. 1–
17.
77. Mishra.R.K, Singh.B and Vasantha.M.K (1992), “Voltage regulators for self
excited cage induction generators”, Electric Power Systems Research, vol. 24, pp.
75–83.
78. Mohan.N, Undeland.T.M and Robinson.W.P (1995), “Power ElectronicsConverters”, Application and Design, Wiley, second edition.
79. Moo.C.S, wei.C.C, Huang.C.L and Liu.C.T (1989), “Hybrid model for dynamic
simulation of solid-state controlled induction machines”, Electric Machines Power
Systems, vol. 17, pp. 269–282.
80. Murthy.S.S, Malik.O.P and Tandon.A.K (1982), “Analysis of self excited
induction generators”, IEEE Proceedings on Generation, Transmission and
Distribution, vol. 129, pp.260–265.
81. Murthy.S.S, Malik.O.P and Walsh.P (1983), “Capacitive requirements of self
excited induction generator to achieve desired voltage regulation”, in the
Proceedings of the IEEE, Industrial and Commercial Power System Conference,
Milwaukee.
82. Murthy.S.S, Singh.B.P, Nagamani.C and Satyanarayana.K.V.V (1988),“Studies on
the use of conventional induction motors as self excited induction generator”,
IEEE Transactions on Energy Conversion, vol. 3,pp (842–848).
83. Neema D.D, Patel R. N and Thoke A. S (2009), “ANN Based Flux and Torque
Estimator for Vector Controlled Induction Drive with Dynamic Loading”,
International Journal of Computer and Electrical Engineering, Vol. 1, pp. 2.
113
84. Nush.H.O (1990), “The truth about standby generator excitation support System”,
IEEE Transactions on Industrial Applications, vol. 26,pp.726–734.
85. Ojo.O (1996), “Performance of self-excited single phase induction generators with
short shunt and long shunt excitation connections”, IEEE transactions.
86. Ooi.B.T and David.R.A (1979), “Induction generator/synchronous condenser
system for wind turbine power”, IEEE Proceedings, vol. 126,pp. 69–74.
87. Phillips.W.H (1999), “Phase frame analysis of the effects of voltage unbalance on
induction machine”, IEEE Transaction on Industrial Application, vol. 33, pp. 415–
420, pp1–7.
88. PraneshRao, Crow.M.L and Zhiping Yang (2000), “STATCOM Control for Power
System Voltage Control Applications”,IEEE Transactions onPower Delivery, Vol.
15, pp. 4.
89. Quazene.L and McPhersonJr.G (1983), “Analysis of the isolated induction
generators”, IEEE Trans. Power Apparatus Systems, vol 102, pp. 2793–2798.
90. Rahim.Y.H.A,Mohamdien.A.L and Al-Khalaf.A.S (1990), “Comparison between
the steady-state performance of self excited reluctance and induction generators”,
IEEE Transactions Energy Conversion, vol. 5, pp. 519–525.
91. RaimondsCimbals, OskarsKrievs and LeonidsRibickis (2011), “Static
Synchronous Compensator for Reactive Power Compensation under Distorted
Mains Voltage Conditions”,10th International Symposium of Topical Problems in
the Field of Electrical and Power Engineering, Pärnu, Estonia, January 10-15.
92. Rajakaruna.S and Bonert.R (1993), “A technique for the steady-state analysis of a
self excited induction generator with variable speed”, IEEE Transactions on
Energy Conversion, vol. 8,pp.57–76.
93. Reynaud.J and Pillay.P (1994), “Reclosing transients in induction machines
including the effect of saturation of magnetizing branch and a practical case
study”, IEEE Transactions on Energy Conversion, vol. 9, pp. 383–389.
94. Richard.G.G and Tan.O.T (1981), “Simplified models for induction machine
transients under balanced and unbalanced conditions”, IEEE Transactions
onIndustraial Applications, vol. 17,pp.15–21.
114
95. Robb.D.D and Krause.P.C (1975), “Dynamic simulation of generator faults using
combined abc and 0dq variables”, IEEE Transactions on Power Apparatus and
Systems, vol. 94, pp. 2084–2091.
96. Senjyu.K, Yona.A. , Urasaki .N, Nishihara and et.al (2009), “Stabilization Control
for Remote Power System by using H∞ Decentralized Controllers”, IEEE
transactions on Power Electronics and Drive Systems, International Conference,
pp. 1068-1074
97. Seyoum.D. and Rahman.M.F. (2003) “Voltage build up process and terminal
voltage control in an isolated wind powered induction generator driven by a
variable speed wind turbine using stator flux oriented vector control”, IEEE
Transactions on Applied Electronics, vol 2, pp. 846-852.
98. Shaheen.H. I, Rashed G. I,and Cheng S.J (2009), “Nonlinear Optimal Predictive
Controller for Static Synchronous Compensator (STATCOM)”, IEEE
Transactions.
99. Sharaf.A.M, Weihua Wang and Altas.I.H (2007), “STATCOM controller for
reactive Power compensation in distribution Networks”, IEEE transactions on
energy conservation appears on Electrical and Computer Engineering, pp.15821585.
100. ShashankWekhande and VivekAgarwal (1999), “The variable speed, constant
voltage controller for induction generator operating in self excited mode.” IEEE
transaction on Power electronics and drive systems, pp.98-103.
101. Shilpakar.L.B, Singh.B and Singh.B.P (1996), “Transient analysis of three-phase
induction generator self excited with C–2C configuration for balanced operation
under single phase loading”, in the Proceedings of the National Power System
Conference, IIT Kanpur, India.
102. Shridhar.L, Singh.B and et.al (1993), “Selection of capacitors for the self
regulated short shunt self excited induction generator”, in the Proceedings of the
IEEE Power Engineering Society Winter Meetings, 93 WM 226-1EC,pp. 1–7.
103. Shridhar.L, Singh.B and et.al (1994) “Analysis of self excite induction generator
feeding induction motor”, in the IEEE Power Engineering Society Summer
Meetings, 93 SM 453-1EC.
115
104. Shridhar.L, Singh.B and Jha.C.S (1995), “Transient performance of the self
regulated short shunt self excited induction generator”, IEEE Transactions on
Energy Conversion,vol 10, pp. 261–267.
105. Sidhartha Panda and PadhyN.P (2007), “Power Electronics Based FACTS
Controller for Stability Improvement of a Wind Energy Embedded Distribution
System”, in the International journal of Electrical and Computer Engineering.
106. Siew-Chong Tan (2008), “General Design Issues of Sliding-Mode Controllers in
DC–DC Converters” IEEE Transactions On Industrial Electronics, Vol. 55, pp.3.
107. Singh.S.P, Singh.B and Jain.M.P (1990), “Performance characteristics and
optimum utilization of a cage machine as capacitor excited induction generator”,
IEEE Transactions on Energy Conversion, vol. 5, pp. 679–684.
108. Singh.S.P, Singh.B and Jain.M.P (1995), “A new technique for the analysis of
self excited induction generator”, Electric Machines Power Systems, vol.23, pp.
647–656.
109. Soltani.J, AbootorabiZarchi .H and Arab MarkadehGh. R. (2009), “Stator- FluxOriented Based Encoderless Direct Torque Control For Synchronous Reluctance
Machines Using Sliding Mode Approach”, World Academy of Science,
Engineering and Technology vol58, pp.883-889.
110. Srinivas P. and Devakumar M.L.S (2010), “Optimization of Power Factor and
Energy Management in Wind Energy Station” Proceedings of the International
Joint Journal Conference on Engineering and Technology (IJJCET).
111. Stanley.H.C (1938), “An analysis of induction machine”, AIEE Transactionss,
Vol. 57, pp. 751–757.
112. Stein.W.M, Manwell.J.F and McGowan.J.G (1992), “A power electronic based
power shedding control for wind/diesel systems”, Intetnational Journal of Ambient
Energy, vol 13, pp. 65–71.
113. Tokat.S, Eksin.I And Guzelkaya.M (2002), “Sliding Mode Control Using A
Nonlinear Time-Varying Sliding Surface”,In The Proceedings Of The 10th
Mediterranean Conference On Control And Automation.
114. Uctug.Y and Demirekler.M (1988), “Modelling, analysis and control of a wind
turbine driven self excited induction generator”, IEEEProceeedings on Generation,
Transmission and Distribution, vol. 135, pp. 268–275.
116
115. Vas.P, Hallenius.K.E and Brown.J.E (1986), “Cross saturation in smooth air gap
electrical machines”, IEEE Transactions on Energy Conversion, vol. 1, pp. 103–
106.
116. Wang.L and Su.J.Y (1997), “Effect of long shunt and short shunt connections on
voltage variations of a self-excitedinduction generator”, IEEETransactions on
Energy Conversion, vol. 12, pp. 368–374.
117. Wang.L and Su.J.Y (1999), “Dynamic performance of isolated induction
generator under various loading conditions”, IEEE Transactions on Energy
Conversion, vol. 14, pp. 93–100.
118. Wang.L and Lee.C.H (1999), “Dynamic analysis of parallel operated self excited
induction generators feeding an induction motor load”, IEEE Transactions on
Energy Conversion, vol. 14, pp.479–485.
119. Wasynczuk.O, DiaoY.M, Krause.P.C (1985), “Theory and comparison of reduced
order models of induction machines”, IEEE Transactions on Power Apparatus
Systems vol. 104, pp. 598–606.
120. Watson.D.B and Watson.R.M (1985), “Microprocessor control of a self excited
induction generator”, International Journal of Electrical Engineering and
Education, vol. 22, pp.69–82.
121. Yang G. H. and Wang J. L (2001), “Non-fragile H infinity control for linear
systems with multiplicative controller gain variations in Automutica, vol. 31, pp.
127-737.
122. Yegnanarayanan.S.S and Johnny.V.J (1986), “Contributions to the steady-state
analysis of wind turbine driven self excited induction generators”, IEEE
Transactions on Energy Conversion, vol. 1, pp. 169–176.
123. Yuan- Rui Chen, Norbert .C, Cheung, Jie Wu (2002) “H∞ Robust Control of
Permanent Magnet Linear Synchronous Motor in High-Performance Motion
System with Large Parametric Uncertainty” , IEEE transaction, Vol. 2, pp. 535539.
124. Zhang Jian, Wen Xuhui and Hua Yang (2008), “Novel speed-sensorless vector
control technique of Induction motor for electrical vehicle propulsion”, IEEE
Vehicle Power and Propulsion Conference (VPPC).
117
125. Zhiping Yang Chen ShenMariesa and Crow LingliZhang.L (2000), “Improved
STATCOM Model for Power Flow Analysis”, IEEE Transactions.