Hardware, Safety and Accessories Hardware, Safety and Accessories V Gear Pump The “V” Gear Pump is a positive displacement pump which features new elements in terms of its technology of fabrication and design. We proudly consider that the “V” Gear Pump represents the ultimate design in its class, based on the original elements we have designed, developed, and implemented. yy Tight tolerances allow greater vacuum abilities for light liquids yy The “V” design gears are self-aligning (self-centering) yy Zero clearance between shafts and gears means that vibration and noise are substantially reduced yy The axial force produced by angled gears is practically eliminated meaning the end plates are protected against premature wearing yy The symmetrical “V” gear design allows continuous flow with less turbulence. Cavitation is not present at normal angular speeds yy Floating seals installed at each end of the gears yy The preliminary dynamic seals protec the main dynamic seals by stopping the heavy particles coming from the media to the inner lips of the main dynamic seals yy With their elastic elements attached they keep the “V” gears balanced by maintaining a gap between gears and end plates even at low angular speeds yy All the above mentioned features contribute to much higher flows, greater efficiencies, increased suction, decreased fuel consumption and longer pump life 84 Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories Reels (Manual or Power Rewind) Series 1500 yy To handle single 1/4” through 5/8” I.D. hose yy Used for Lawn Care, Pest Control, Pressure Washing, Agriculture, Steam Cleaning, High Pressure, Water and Air yy Lightweight, compact reels designed for long lengths of hose in manual and power rewind yy Direct crank rewind is permanently attached yy Chain and sprocket drive powered by electric, hydraulic or compressed air motor yy Manual reels include cam-lock drag brake, spring actuated pin lock yy Standard inlet: 90° ball bearing swivel joint, 1/2” female NPT threads yy Standard outlet: 1/2” female NPT threads yy Standard pressures to 3000 psi (207 bar), available up to 10,000 psi (690 bar) – must specify yy Temperatures from +20°F to +400°F (-7°C to +204°C) Series 1800 yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy Description Left Handed Crank Right Handed Crank Electric Rewind Reel To handle single 1/4” through 5/8” I.D. hose Lightweight, compact reels designed for long lengths of hose in manual and power rewind Direct crank rewind is permanently attached Chain and sprocket drive powered by electric, hydraulic or compressed air motor Manual reels include cam-lock drag brake, spring actuated pin lock Standard inlet: 90° ball bearing swivel joint, 1/2” female NPT threads Standard outlet: 1/2” female NPT threads Optional rollers: Specify roller position when ordering Standard pressures to 3000 psi (207 bar), available up to 10,000 psi (690 bar) – must specify Temperatures from +20°F to +400°F (-7°C to +204°C) Series 7500 yy yy yy yy Part No. A1514-17-18-LT A1514-17-18-RT E1520-17-18 To handle 1” through 1-1/2” I.D. hose Used for Fuel Dispensing, Bulk Transfer, Suction and Discharge Heavy-duty reel designed for longer lengths Choose gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic, or compressed air motor Crank rewind reels supplied with pinion brake and power rewind reels with a comet brake Standard inlet: 90° ball bearing swivel joint, 1-1/2” female NPT threads and 2” victaulic groove Standard outlet: flanged riser, 1-1/2” female NPT threads Standard inlet, outlet riser, and hub assembly are steel Rollers may be purchased as accessory items Operate at pressures to 600 psi (41 bar) Temperatures from -60° F to +175° F (-51° C to +79° C) Part No.: 1830-17-18 Part No.: 7528-19-21 Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 85 Hardware, Safety and Accessories Handle-Tech Handle-Tech Handles are a ground breaking safety tool for today’s oil and gas industry and the environmental service industry. The easy to use mechanism enables you to clamp onto hose or pipe easily and allows you to safely grip, torque and release single-handledly through a natural fluid movement. Through mud, cold, rain, or sleet, Handle-Tech’s innovative design allows your workers to safely and efficiently manipulate hoses and pipes in any climate or location. yy Drilling mud suction hose yy Frac pipe yy Tanker hoses - diesel, jet fuel yy Water pressure hose, fire hose Part No. 300SUC 400SUC Hose O.D. Size 3” - 3.75” 4" - 4.75" Note that this device was designed for hand-use only and should only be used as designed Kwik Bandit Part No.: 100784-410 Our Heavy Duty Kwik Bandit is the strongest version that has become popular with heavy industry and construction. This is the ideal solution for grouping and bundling pipes or securing heavier loads and binding materials during work. The Heavy Duty Kwik Bandit is functional in extreme weather conditions, resistant to sun damage and capable of 75 lbs of tensile strength. Heavy Industry The Kwik Bandit is designed and manufactured to withstand the most extreme Canadian environments. Many companies hauling fluids and cement use the Heavy Duty Kwik Bandit as a cam lock safety strap. Safety in the Workplace Three easy steps: Stretch, Wrap Lock! One of our goals was to design a product that replaced dangerous binding products that have caused serious workplace injuries from normal operation. Interlocking Technology Our Lock Pin line can easily be used to combine several Standard or Heavy Duty Kwik Bandits together, forming a strong chain that holds a very large diameter. This is a great way to work with very large objects or create tie downs on larger transports. 86 Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 Uses for Heavy Duty Kwik Bandit: yy Cam Lock safety straps yy Binding pipes, tubes and other materials yy Organizing large cables and hoses yy Securing hoses on tanker truck trays Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories Hosebun™ Proper Support For Hoses and Cables! Your hoses and cables are often an expensive and important part in your production processes. But hoses and cables can often be an obstacle and are therefore susceptible to damage that may arise by driving over them, falling down, bending and kinking. This can reduce the lifespan of your hoses or cables significantly. The Hosebun™ offers optimal support and protection, and guarantees the flow of the substance you want to transport through the hose or cable. The Hosebun™ therefore increases the lifespan of your expensive hoses and cables considerably, and ensures that the flow remains optimal. Hosebun yy yy yy yy yy Optimal Support The specially developed shape of the Hosebun™ saddle, made from strong polyurethane material, results in the Hosebun™ providing optimal support for your hose or cable. Comes with Hose Saddle and type 4 hook eye or D-Ring sling Made of Polyurethane Color: Signal Red Max. Temperature Range: ± 90° C. Hosebun is available in size 1” to 12” Part No. HB100D HB200D HB300D HB400D Optimal Protection Whether it’s liquid, solids and/or other media, the flow through your hose or cable combined with the Hosebun™ is optimal, and without constrictions or blockages due to being suspended. Description 1” Hose I.D. 2” Hose I.D. 3” Hose I.D. 4” Hose I.D. Optimal Flow Hosebun™ supports your hose or cable to create an optimal flow, and to prevent any delays in the production process. Hose HOG (Hose Off Ground) yy yy yy yy Made of Polyurethane Contoured radius accommodates size hoses 2”, 3” and 4” Lightweight and easy to set up on your truck The ground hoseHOG will save your hoses, save you money and help prevent fluid leaks for just pennies Invest to save costs Besides significantly expanding the life of your hoses and/or cables with the use of the Hosebun™, the delays in your production process due to constriction, damage or breakage are greatly reduced. Hosehorse yy Molded plastic hose stands yy Available in Orange, Yellow and Red yy Contoured radius accommodates any size hose from 2” to 24” yy Reflective decals yy Molded handles or Rope handles yy Meets FDA sanitary hose regulations yy Stackable,Durable yy Weight: From 4 - 18 lbs (depends on model) yy Height: From 11” to 42” high (depends on model) Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 87 Hardware, Safety and Accessories LED Lightbars and Work Lights Double Row Curved Lightbar The absolute best light coverage possible in a single bar! Ideal for mounting on roof racks or curved bumpers and grilles. Available in 20”, 30”, 40” and 50” sizes. Flood, Spot & Combo configurations. yy Operating Voltage: 10-30V DC yy Waterproof Rating: IP 67 High Roller (HR Series) yy Color Temperature: 6000K Part No. Size Power Light Output yy Light Engine: CREE - 3W High Output Chip HRC-20 20” 120W 9,000 Lumens yy Housing: Die-cast Aluminum yy Lens: Polished Polycarbonate HRC-30 30” 180W 13,500 Lumens yy Mounting Bracket: Adjustable Wings HRC-40 40” 240W 18,000 Lumens yy 50,000 Hour Lifetime HRC-50 50” 288W 21,600 Lumens yy 5 Year Instant Replacement Warranty Our Curved Lightbars provide as much as 60% more coverage over our traditional straight models. Quad Stack High Intensity Lightbar Our Reactor series is the ultimate bar available with the most size options, best optics and the absolute most light possible. Our Reactor models guarantee no need to compromise and use our UHP 3W CREE light engine for maximum output! yy Operating Voltage: 10-32V DC yy Waterproof Rating: IP 67 yy Color Temperature: 6000K yy Light Engine: CREE - 3W UHP ULTRA Chip yy Housing: Die-cast Aluminum yy Lens: Polished Polycarbonate yy Mounting Bracket: Low-profile adjustable bottom posts Reactor (RCS series) yy 50,000 Hour Lifetime yy 5 year instant replacement warranty Part No. Size Power yy Quick-Connect Deutsche connector RCS-36 4” 36W RCS-72 7” 72W RCS-108 9” 108W All Reactor models are available in: RCS-144 12” 144W yy 8 degree spot light RCS-180 15” 240W yy 90 degree flood light RCS-252 20” 252W yy Numerous custom configurations for maximum flexibility RCS-468 36” 468W yy Available in black or white housing (marine) Light Output 2,520 Lumens 5,040 Lumens 7,560 Lumens 10,080 Lumens 12,600 Lumens 17,640 Lumens 32,760 Lumens Installation Accessories Mounting, Windshield and Replacement Kits are available 88 Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories Single Row High Output Lightbar Every PERSUADER model utilizes our UHP 10W CREE based Light engine featuring specialized optics providing amazing beam throw distance and uniform ULTRA brightness. Available in Spot, Flood & Combo arrays yy Operating Voltage: 10-32V DC yy Waterproof Rating: IP 67 yy Color Temperature: 6000K yy Light Engine: CREE - 10W UHP ULTRA Chip yy Housing: Die-cast Aluminum yy Lens: Polished Polycarbonate yy Mounting Bracket: Low-profile Sliding bottom posts yy 50,000 Hour Lifetime yy 5 Year Instant Replacement Warranty Persuader (PSX Series) yy Quick-Connect Deutsche connector Part No. Size PSX-20 4.6” PSX-40 7.8” PSX-60 10.9” PSX-100 17.2” PSX-120 20.3” PSX-180 29.3” PSX-240 39.1” PSX-260 42.4” Power 20W 40W 60W 100W 120W 180W 240W 260W Light Output 1,720 Lumens 3,440 Lumens 5,160 Lumens 8,600 Lumens 10,320 Lumens 15,480 Lumens 20,640 Lumens 22,360 Lumens Every PERSUADER model utilizes our UHP 10W CREE based Light engine featuring specialized optics providing amazing beam throw distance and uniform ULTRA brightness. Available in Spot, Flood & Combo arrays yy Operating Voltage: 10-32V DC yy Waterproof Rating: IP 67 yy Color Temperature: 6000K yy Light Engine: CREE - 10W UHP ULTRA Chip yy Housing: Die-cast Aluminum Persuader MX (PMX Series) yy Lens: Polished Polycarbonate yy Mounting Bracket: Low-profile Sliding bottom posts Part No. Size Power yy 50,000 Hour Lifetime PMX-40 4.6” 40W yy 5 Year Instant Replacement Warranty PMX-80 7.8” 80W yy Quick-Connect Deutsche connector PMX-120 10.9” 120W PMX-200 17.2” 200W PMX-240 20.3” 240W Light Output 3,440 Lumens 6,880 Lumens 10,320 Lumens 17,200 Lumens 20,640 Lumens Double Row High Output Lightbar Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 89 Hardware, Safety and Accessories Single Stack Mega Output Lightbar The BARRAGE MINI is the svelte version of the extremely popular BARRAGE series and packs a big punch in a small box. This ultra powerful light engine uses our UHP 10W CREE chips with advanced 3D optics. A clean, form fitting fixture that can go anywhere featuring adjustable bottom post EZ-mounts that can be attached at any location along the bar to fit any pre-drilled brush/push bar. yy Operating Voltage: 10-32V DC yy Waterproof Rating: IP 67 yy Color Temperature: 6000K yy Light Engine: CREE - 10W UHP ULTRA Chip yy Housing: Die-cast Aluminum Barrage Mini (BGM Series) yy Lens: Polished Polycarbonate Part No. Size yy Mounting Bracket: Sliding adjustable bottom posts BGM-20 5” yy 50,000 Hour Lifetime yy 5 year instant replacement warranty BGM-40 9” BGM-80 17” BGM-120 25” BGM-180 37” Power 20W 40W 80W 120W 180W Light Output 1,900 Lumens 3,800 Lumens 7,600 Lumens 11,400 Lumens 17,100 Lumens Dual Stack Powerbase Lightbar The One That STARTED it ALL! The LAUNCH series is our baseline lightbar series. Value priced lighting that will launch your off-road lighting needs in the right direction. Available in both CREE and EPISTAR light engine power for Maximum choice and cost flexibility. All LAUNCH models can be purchased in spot, flood and combo configurations. yy Operating Voltage: 10-32V DC yy Waterproof Rating: IP 67 yy Color Temperature: 6000K Launch (LX Series) yy Light Engine: CREE or Epistar 3W High Output Chip Part No. Size yy Housing: Die-cast Aluminum LXC-36 7.5” yy Lens: Polished Polycarbonate yy Mounting Bracket: Sliding adjustable bottom posts LXC-72 13.5” yy 50,000 Hour Lifetime LXC-120 21.5” yy 5 year instant replacement warranty LXC-180 31.5” LXC-240 41.5” LXC-300 50” 90 Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 Power 36W 72W 120W 180W 240W 300W Light Output 2,520 Lumens 5,040 Lumens 8,400 Lumens 12,600 Lumens 16,800 Lumens 21,000 Lumens Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories Mixed Array Combination Lightbar Our FUSION SERIES bring two PowerHouse Lightbars together in one compact, effective package. By combining our 8 degree laser focused spotlight and 90 degree ultra floodlight, you now never have to be without enough light to get the job done. All FUSION series models are complete with separate wiring for each array type to give you complete control with the included 4 way switch and harness. yy Operating Voltage: 10-32V DC Floodlight yy Waterproof Rating: IP 67 Optics yy Color Temperature: 6000K yy Light Engine: CREE High Output Multi Chip yy Housing: Die-cast Aluminum yy Lens: Polished Polycarbonate Fusion (FSX Series) yy Mounting Bracket: Side-Mount Adjustable Wings Part No. Size yy 50,000 Hour Lifetime yy 5 Year Instant Replacement Warranty FSX-68 13.5” FSX-112 21.5” FSX-212 41.5” FSX-264 50” Spotlight Optics Power 20W 112W 212W 264W Floodlight Optics Light Output 5,080 Lumens 8,480 Lumens 17,080 Lumens 20,400 Lumens Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 91 Hardware, Safety and Accessories AMSOIL AMSOIL Premium Synthetic Motor Oil and Lubricants provide optimum performance for your cars, trucks, SUV’s, motorcycles, boats, 2 cycle, equipment and machinery. AMSOIL Synthetic Oils and Lubricants also provide the best protection for your investment, extend equipment life, lower operating and fuel costs, and provide environmentally friendly solutions. AMSOIL formulates the widest selection of synthetic oils and lubricants available for all types of automotive, diesel, racing, fleet, marine, farm and agricultural, 2-cycle and industrial applications. AMSOIL has developed sophisticated, high performance nanofiber oil filters, bypass oil filters, nanofiber reusable air filters, gasoline and diesel fuel additives and other companion products that extend equipment life and lubricant performance. SAE 5W-20 Signature Series 100% Synthetic Motor Oil Premium Synthetic 5W-40 Diesel Oil yy Extends Drain Intervals yy Maximizes Fuel Economy yy Reduces Engine Wear yy Reduces Oil Consumption and Emissions yy Excels in Extreme Temperatures Part No. Description ALMQTCCA 946 ml / 32 oz. bottle yy Meets Emission System Requirements yy Extended Drain Performance yy Improves Fuel Economy yy Minimizes Oil Consumption and Emissions yy Controls Soot-Thickening and Wear Part No. Description DEOQTCA 946 ml / 32 oz. bottle Premium Synthetic 15W-40 Diesel Oil Diesel Injector Clean yy yy yy yy Meets Emission System Requirements Extended Drain Performance Controls Soot-Thickening and Wear Superior Shear Stability, Reduced Oil Consumption yy Ideal for Fleets Part No. Description DMEQTCA 946 ml / 32 oz. bottle 92 Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 yy Formulated for all diesel fuel systems, including high-pressure common-rail designs yy Cleans dirty injectors yy Improves fuel economy up to 4.5 percent yy Improves power and torque yy Minimizes Soot-Loading yy Separates Fuel and Water Part No. Description ADFCNCCA 473 ml / 16 oz. bottle Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories CRC Brakleen™ Brake Parts Cleaner Brakleen™ Brake Parts Cleaner (Non-Chlorinated) Formulated to quickly & effective remove grease, brake dust, brake fluids, oils, & other contaminants from brake parts, lining, pads Part No. Description 75089 539 g / 19 oz. 75090 3.79 L / 1 gal. 75091 19 L / 5 gal. Brake Cleaner to use where compliance calls for a chlorine-free product. • Formulated to quickly remove brake fluid, grease, oil, and other contaminants from brake linings and pads Part No. Description 75088 397 g / 14 oz. Jump Start Starting Fluid JUMP START Starting Fluid assures fast, economical starts in cold or humid conditions. Also contains an upper cylinder lubricant to minimize wear during cold starts yy For use in both gasoline & diesel engines. Spray in air intake or air cleaner while engine is off Part No. 75671 Description 312 g / 11 oz. Quick Flow® Emergency Diesel-Gel Relief yy Totally disperses water and lowers pout point by as much as 35°F yy Prevents future gelling since it contains anti-gel yy No additional products needed for optimum performance Part No. 75911 Air Brake Anti Freeze yy Provides complete winter protection for all brake systems yy Will eliminate and prevent moisture |accumulation and icing Part No. ABAF1 ABAF4 Description 946 ml / 32 oz. 3.79 L / 1 gal. Description 946 ml / 32 oz. Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 93 Hardware, Safety and Accessories Flame-Resistant Clothing Flame-Resistant Extremes Arctic Coat Flame-Resistant Extremes Arctic Biberall Part No.: 100784-410 yy 9-ounce FR canvas 88% cotton/12% high-tenacity nylon yy Unique Sherpa-lined interior back panel for increased warmth yy Fully Insulated with 3M® Thinsulate® 200gram Platinum yy Left chest pocket has a radio integration pass-through slot yy Four generous interior pockets, two upper and two lower yy Insulated stand-up collar yy Available in Regular Sizes Small to 4XL yy Available in Tall Sizes from Large to 3XL Part No.: 100785-410 yy 9-ounce FR canvas 88% cotton/12% high-tenacity nylon yy Fully Insulated with 3M® Thinsulate® 200gram Platinum yy Ankle-to-thigh zippers with interior/exterior storm flaps yy 3M® Scotchlite® reflective trim (#8940) around legs yy Heavy duty Vislon two-way zipper with Nomex™ FR zipper tape yy Full-length interior/exterior storm flap and hook-and-loop closure yy Available in Regular Sizes Small to 4XL yy Available in Tall Sizes from Large to 3XL Flame-Resistant Grid Beanie Part No.: 100492 yy Our FR beanie is made from 11.9-ounce, FR Polartec™ Power Stretch™ fabric: 67% modacrylic/29% rayon/4% spandex yy Its grid construction maximizes warmth, minimizes weight, and enhances breathability yy It wicks moisture for comfort yy Meets the performance requirements of NFPA 70E yy Available in Black, Carhartt Brown, Dark Navy or Steel 94 Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 Flame-Resistant Duck Bib Overall/Unlined Part No.: FRR45 yy 13-ounce, 100% cotton FR Duck yy High back with FR elastic suspenders and FR center-release buckles yy Chap-style double-front enhances durability and Multiple tool and utility pockets yy Ankle-to-above knee brass leg zippers with Nomex™ FR zipper tape and protective flaps with arc-resistant snap closures yy FR melamine buttons at waist and brass zipper fly with Nomex™ FR zipper tape yy Carhartt FR and HRC 2 labels sewn on leftchest pocket yy Meets the performance requirements of NFPA 70E yy For the best fit, order one size larger in waist and one size shorter for inseam length. If wearing heavy layers, order two sizes larger in waist. yy Available Colours: Black, Carhartt Brown or Dark Navy yy Available in Sizes: 30 to 54 inches wide in various lengths Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories Flame-Resistant Duck Bib Overall/Quilt Lined Part No.: FRR44 yy Made of 13-ounce, flame-resistant 100% cotton duck, it features a quilt lining, a high back with flame-resistant elastic suspenders and high temperature nylon center-release buckles yy They also have a chap-style double front for durability, flame-resistant melamine button at waist, multiple tool and utility pockets, ankle-tomid-thigh brass leg zippers with Nomex™ zipper tape and protective flaps and arc-resistant snap closures yy NFPA 70E compliant yy Ankle-to-thigh leg zippers yy For the best fit, order one size larger in waist and one size shorter for inseam length. If wearing heavy layers, order two sizes larger in waist. yy Available Colours: Black, Carhartt Brown, Dark Navy or Steel yy Available in Sizes: 30 to 54 inches wide in various lengths Flame-Resistant Hard Hat Liner Part No.: 101200 yy Made of 9-ounce, 100% cotton FR twill with an 11.7-ounce Polartec™ Power Stretch™ fabric lining yy There are inside warming pouch pockets over the ears, and a lower front closure to keep out wind and protect the neck yy Meets the performance requirements of NFPA 70E yy Available in One Size Flame-Resistant Duck Traditional Coat/Quilt-Lined Part No.: FRC066 yy Protect yourself from flash fire or electric arcs on the job yy Our flame-resistant duck traditional coat is quilt-lined and made of 13-ounce flame-resistant, 100% cotton duck yy It features two inside patch pockets with flame-resistant hook-and-loop closures, Nomex™ inside-waist drawcord for an adjustable fit, rib-knit’storm cuffs to seal out cold air, a two-way brass zipper and snaps under the collar for an optional hood (FRA265) yy NFPA 70E compliant yy Available Colours: Black, Carhartt Brown, Dark Navy or Steel yy Available in Regular Sizes Small to 4XL yy Available in Tall Sizes from Large to 3XL Flame-Resistant Fleece 2-in-1 Knit Hat Part No.: 100164-410 yy Hat by itself or hat with face mask, our flame-resistant fleece 2-in-1 knit hat works two ways to provide comfort and protection yy Pull down the face mask when weather threatens, or tuck it up into the hat and out of the way when conditions permit yy The hat is constructed of 7.5-ounce, Nomex™ IIIA fleece, and the pull down/up face mask is a 6-ounce blend of 48% modacrylic and 48% Tencel™ with 4% spandex for comfort and stretch yy Meets NFPA 70E, HRC 2 and ATPV 15 standards yy Available in One Size Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 95 Hardware, Safety and Accessories Rain Gear FR DRY-GEAR™ WCBBC Jacket yy Fluorescent Orange 5oz/yd² FR PU/Knit Polyester yy 3M® Scotchlite® yellow high gloss vinyl striping meets WCBBC standards yy Raglan sleeves yy Fabric stretches up to 150% yy Excellent cold flex yy Oil resistant and Snag resistant yy Recommended for “Momentary Protection from Open Flame” Part No. Description J12501S S J12501M M J12501L L J12501XL XL J125012XL 2XL J125013XL 3XL J125014XL 4XL Element FR™CSA 3 Piece Suit yy All 3 pieces sold as one suit: Jacket, Pant, Hood yy Hi-Viz Orange 13 oz./yd² FR PVC/Polyester yy Oil resistant yy Good tear and snag resistance yy Extremely durable and comfortable yy Remains flexible in cold conditions yy Permanently welded seams yy Generous styling fits over work clothes Part No. Description R85S S R85M M R85L L R85XL XL R852XL 2XL R853XL 3XL R854XL 4XL Windshield Washer Fluid Part No. 128229 WWF-SUMMER 96 Description Winter 3.79 L / 1 gal. Summer 3.79 L / 1 gal. Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 Airlok Waterproof Footwear yy Rated for -50ºC yy Composite toe and non-metallic midsole provides full safety protection and increased thermal insulation in cold weather yy Winter tire tread inspired tread pattern features wider and deeper dispersion lines designed to pull water up and away from the contact point in the sole and ground for greater slip resistance yy Lightweight and comfortable with an innovative heel-tab for easy removal yy Reinforced ankle protection and extra ankle room to prevent rubbing yy Upper grip on boot allows you to easily put on boots even when wet or muddy yy Ergonomically designed upper boot to allow for a better range of movement at the calf yy Mineral, Organic and Chemical Resistant Part No. Description B105FULGR08 Small (8) B105FULGR09 Medium (9) B105FULGR10 Large (10) B105FULGR11 XL (11) B105FULGR12 XXL (12) B105FULGR13 XXXL (13) Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories Gloves Super Green King™ Striker® Kevlar™ Palm Coated yy yy yy yy yy High visibility impact patch Excellent grip in oil based applications 3/ 8” back hand impact protection Withstands multiple washings Heavy cotton fleece keep hands warm in cold conditions and wicks moisture in warm conditions yy Most recommended glove in the drilling industry by workers Part No. Description SGKSTR One Size yy 100% Kevlar™ knit yy Nitrile coated palm yy DuPont Kevlar™ shell protects against cuts, slashes and abrasionsCoated palm resists punctures while still allowing excellent manual dexterity yy Allows for excellent tactile sensitivity Part No. Description Y9256M M (9) Y9256L L (10) Y9256XL XL (11) PetroChief® yy Color red and Grip Coated yy Double-dipped finish allows the wearer an incredible grip in wet and oily conditions yy All coated safety cuff yy Range of different liners ensures comfort regardless of the temperature Part No. Description PC830L L (10) - Jersey Lined PC893L L (10) - Foam lined (Winter) 91426 Winter Whammy yy Foam lining yy Durable split-grain cowhide leather yy Cotton drill back yy Full leather index finger yy Hooded fingertips yy Pulse protector and knuckle bar yy Shirred elastic wrist yy Slip-on style safety cuff Part No. Description 91426 One Size 94007 Siberian Express 1426B Econo Split A281E Rawhide yy 3M Thinsulate® C100 lining yy Full-grain pigskin leather yy Palm patch yy Cotton drill back yy Shirred elastic wrist yy Slip-on style safety cuff Part No. Description 94007 One Size yy Split cowhide leather yy Cotton drill back yy Shirred elastic wrist yy Slip-on style safety cuff Part No. Description 1426B One Size yy Economy-grade full-grain cowhide leather yy Cotton drill back yy Outside elastic wrist yy Slip-on style safety cuff Part No. Description A281EXL XL (11) A281EXXL XXL (12) Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 97 Hardware, Safety and Accessories Safety Glasses Genesis® Glasses yy Wraparound 9-base lens style, uncompromised peripheral vision, superior coverage and adjustable temple length and lens inclination yy Soft elastomer browguard diffuses and deflects impact yy Nosepiece with soft flexible “fingers” adjusts and conforms to almost any nasal profile to reduce slippage yy Meets the ANSI Z87.1-2010 standard yy Certified to the requirements of the CSA Z94.3 standard Part No. Description S3200X Black Frame, Clear Lens Tint S3202X Black Frame, Amber Lens Tint S3204 Black Frame, SCT-Reflect 50 Lens Tint S3205X Black Frame, SCT-Gray Lens Tint S3209 Black Frame, SCT-Low IR Lens Tint S3211X Black Frame, SCT-Blue Lens Tint S3240X Vapor Blue Frame, Clear Lens Tint S3241X Vapor Blue Frame, Espresso Lens Tint S3242 Vapor Blue Frame, Amber Lens Tint Ztek and Mini Ztek Glasses yy yy yy yy Economical Wrap-Around Single Lens Provides Full Panoramic View Soft Non-Slip Rubber Temple Tips Provide Non-Binding Fit Integrated Nose Piece Exceeds ANSI Z87.1 High Impact Requirements, CE EN166 Certified, CAN/CSA Z94.3-07 Part No. Description S2510S Clear Lens S2515S Coffee Lens S2520S Gray Lens S2530S Amber Lens S2560ST Infinity Blue Lens S2570S Gray Polycarbonate Lens With Silver Mirror Coating. S2580S Indoor/Outdoor Mirror Lens S2510SN Mini Ztek Clear Lens S2520SN Mini Ztek Gray Lens S2530SN Mini Ztek Amber Lens S2580SN Mini Ztek Indoor/Outdoor Mirror Lens 98 Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories More Safety Spill Kit yy 1-plastic keg 9 gal. with lid and lock ring yy 1-pair of gloves yy 1-pair nitrile goggles yy 2-heavy duty disposal bags w/ties yy 1-neoprene drain cover yy 2-absorbant socks, 48” long yy 20 absorbant pads yy 1-patch stick Part No. Description SK64529 Spill Kit Bear Spray yy Glow in the Dark Top yy Safety Lanyard yy Brushed Aluminum Can yy 0.98% Capsaicin yy Comes with Holster Part No. Description BBP0010 225 g Traffic Vest yy Adjustable Sizing yy Hi Viz Fluorescent Orange Polyester Mesh Material yy Reflective Material Meets WCB PP2 High Visibility Garment Standards yy Illumination 330 yy Two Breast Pockets yy Two Front Pockets yy Safety Harness D Ring Slot with Closure yy Velcro Closure with 5 Point Tearaway yy Hand Wash Cold Water and Hang to Dry Part No. Description ETV1001 One Size First Aid Kit Triangular Reflector Kit yy Triangular Reflector Kit - set of 3 yy Heavy weighted base yy Reusable storage container Part No. Description XG29 Set of 3 - Triangular Reflector Kit Content: yy First aid manual: 1 yy Safety pins (pack of 12): 1 yy Tweezers kit: 1 yy Scissor kit: 1 yy Plastic adhesive strip 3/4” x 3” sterile: 25 yy Pressure bandage 4” sterile: 2 yy Pressure bandage 6” sterile: 2 yy Gauze pad 4” x 4” sterile: 10 yy Tensor bandage 3”: 1 yy Conform bandage 3” x 5: 2 yy Triangular bandage: 2 yy Rescue breather: 1 yy Ziplock bag 8 x 10: 1 yy Antiseptic Benzalkonium sachets: 10 yy Nitrile disposable gloves (1 pair): 4 Part No. Description FAKALT1BM First Aid kit AB #1 Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 99 Hardware, Safety and Accessories Accessories Hurricane Tape™ ABC Dry Chemical Fire Extinguisher yy Durable High Gloss Polyester Powder Paint yy All Metal Valve Construction yy Aluminum Valve - Light to Medium Duty yy Temperature Range -65°F to 120°F yy Dependable Drawn Steel Cylinders Part No. Description A411X 20lb B417TX 2.5lb with vehicle bracket B456X 10lb B500TX 5lb with vehicle bracket A high strength, high tack pressure sensitive tape designed to vastly outperform most or all utility tapes on the market today. With seven standard sizes and 5 available colors, HURRICANE TAPE™ will resist 50-100 times more than the competition against tearing, flaking, decay and breakdown. Part No. Description HTAPE1X60 1 in x 180 ft HTAPE2X20 2 in X 60 ft HTAPE2X60 2 in X 180 ft HTAPE3X60 3 in X 180 ft Waterproof Lantern Explosion Proof Light yy Constructed of Polypropylene, Polycarbonate and Unbreakable Tuflexx yy 15 Hour Operating Lamp Life yy Powered by Alkaline or Carbon Zinc 6V yy 50,000 Beam Candlepower Part No. Description 459 Lantern Energizer Industrial Alkaline Batteries Part No. E96BP2 EN91 EN92 EN93 EN95 EN22 100 Description AAAA AA AAA C D 9V Reliance Group of Companies Supporting Every Industry 2015-02 v.1.1 General Use Vinyl Electrical Tape 3M™ Temflex™ Electrical Tape 1700 is a good quality, economical general purpose vinyl insulating tape. It has excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion and varying weather conditions. Part No. Description 6140 Tape, 3/4 in x 66 ft (19 mm x 20 m) 6v Lantern Battery yy Ready to Use for up to 3 Years *when not in use yy Zero Added Mercury and Cadmium yy Quality Seal for Trusted Power Part No. 1209 Description 6v Lantern Battery Energizer® Intrinsically Safe® 2D LED Flashlight yy Class 1 Division 1 rated yy Impact resistant yy Built-in carabiner belt clip yy Oil and grease resistant body yy Waterproof yy 60 lumens, runtime 70 hour Part No. Description MS2DLED 2 D Battery Flashlight Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking Hardware, Safety and Accessories Sash Cords Part No. 12SASH 516SASH-FT Nylon Ropes Description #16, 1/2 inch x 100’ #10, 5/16 inch x 100’ Part No. ROPENYLON14 ROPENYLON12 ROPENYLON34 1 NYLONROPE Clevis Grab Hooks Description 1/4 inch 1/2 inch 3/4 inch 1 inch Part No. CLEVIS14 CLEVIS516 CLEVIS38 CLEVIS12 Description 1/4 inch 5/16 inch 3/8 inch 1/2 inch EPDM Tarp Straps Part No. RS10016W RS2X25 RS2X30 Description 1 inch x 16 ‘ 2 inch x 25 ‘ 2 inch x 30 ‘ Ratchet Type Load Binder Part No. 38-12RB Shackle Bolts (G-2130) Part No. 1019466 1019470 1019472 1019490 1019515 1019533 1019551 Description 1/4 inch 3/8 inch 1/2 inch 5/8 inch 3/4 inch 7/8 inch 1 inch Description Load Binder Nylon Slings Part No. NYLEE2901X6T4 NYLEE2901X8T4 NYLEE2902X2T4 NYLEE2902X4T4 NYLEE2902X6T4 NYLEE2902X8T4 NYLEE2902X10T4 NYLEE2902X12T4 NYLEE2903X6T4 NYLEE2903X8T4 NYLEE2903X14T4 NYLEE2904X12T4 Description 1” x 6’ 1” x 6’ 2” x 2’ 2” x 4’ 2” x 6’ 3” x 8’ 2” x 10’ 2” x 12’ 3” x 6’ 3” x 8’ 3” x 14’ 4” x 12’ Ratchet Straps Come Along (Cable Puller) Part No. Description 80263 1.5 Ton Lever Puller Part No. RS10016W RS2X25 RS2X30 Description 1 inch x 16 ‘ 2 inch x 25 ‘ 2 inch x 25 ‘ Document Holder Part No. 1589 Description 9 inch long Call your local Reliance office to order at 1-877-955-7115 www.relianceindustrial.com 2015-02 v.1.1 101 Premium Products, Exceptional Service Reliance is your Eaton Platinum Distributor More Locations to Serve You Better Head Office (Nisku AB) Brooks Calgary Clairmont Dawson Creek Edson Grande Prairie Lloydminster Redcliff Red Deer 606 - 19 Avenue Nisku, AB T9E 7W1 Tel: 780.955.7115 Fax: 780.955.7121 4637 3 Avenue Edson, AB T7E 1C2 Tel: 780.723.5927 Fax: 780.723.5714 Greeley 2030 E. – 8 St., Suite B Greeley, CO 80631 Tel: 970.346.3751 Fax: 970.353.3168 Bay 3 & 4, 515 – 1st Ave East Brooks, AB T1R 0H1 Tel: 403.362.4562 Fax: 403.362.4486 11450 98 Avenue Grande Prairie, AB T8V 7P4 Tel: 780.532.4702 Fax: 780.539.5510 Houston 4115 Kreinhop Road Suite 124 Spring, TX 77388 Tel: 281.288.9720 Midland #129-7007 54 St. SE Calgary, AB T2C 3C2 Tel: 403.720.0767 Fax: 403.720.8719 5801 63 Avenue Lloydminster, AB T9V 3C3 Tel: 780.872.5635 Fax: 780.872.5634 2904 S County Road 1250 Midland, TX 79706-2639 Tel: 432.689.0102 Fax: 432.699.4898 San Antonio 8301 98 Street Clairmont, AB T0H 0W0 Tel: 780.532.4673 Fax: 780.532.4370 #1, 123 Lockwood St. NE Redcliff, AB T0J 2P0 Tel: 403.548.7230 Fax: 403.548.7251 4327 Centergate St. San Antonio, TX 78217 Tel: 210.650.3636 Fax: 210.650.3133 Shreveport 1001 M and O Drive Bossier City, LA 71111 Tel: 318.687.5486 Fax: 318.687.5491 2612 92 Avenue Dawson Creek, BC V1G 4G7 Tel: 250.782.1172 Fax: 250.782.1173 #110, 7660 76 St. Close Red Deer, AB T4P 4G6 Tel: 403.309.6729 Fax: 403.309.6780 Williston 4970 Highway 85 Williston, ND 58801 Tel: 701.572.7035 Fax: 701.572.70300 Reliance Design and Manufacturing: 780.955.3080 | Reliance Hydraulic Services: 780.955.2042 Reliance Safety Supply and Service: 780.955.7115 | Reliance Commercial Sign Printing: 780.955.7115 Servco Oilfield Supply: 780.955.7444 Toll Free: 1 877 955 7115 www.relianceindustrial.com