TMEIC Motors Offer Complete Coverage
Rotating Machinery
Low and Medium Voltage
Motor Specifications
© 2011 TMEIC Corporation. All Rights Reserved
LIFTING LUG
GREASE INLET AND OUTLET
D
M-1164
MOUNTING HOLES
24- M
AIR OUT
S
B
A
C
G
AIR IN
TERMINAL BOX FOR STATOR
AIR IN
Q
KG
All specifications in this document are subject to change without notice. The above
brochure is provided free of charge and without obligation to the reader or to TMEIC
Corporation. TMEIC Corporation does not accept, nor imply, the acceptance of any
liability with regard to the use of the information provided. TMEIC Corporation
provides the information included herein as is and without warranty of any kind,
express or implied, including but not limited to any implied statutory warranty of
merchantability or fitness for particular purposes. The information is provided solely
as a general reference to the potential benefits that may be attributable to the
technology discussed. Individual results may vary. Independent analysis and testing
of each application is required to determine the results and benefits to be achieved
from the technology discussed. If you have any questions regarding your project
requirements, please contact TMEIC Corporation at 540-283-2000
50 (2.0)
H
L
F
All other products mentioned are registered trademarks and/or trademarks of their
respective companies.
E
R
TMEIC Europe Limited
6-9 The Square, Stockley Park
Uxbridge, Middlesex,
United Kingdom, UB7 7LT
Tel.: +44 870 950 7220
Fax: +44 870 950 7221
Email: info@tmeic.eu
Web: www.tmeic.com
TMdrive is a registered trademark of Toshiba Mitsubishi-Electric Industrial Systems
Corporation.
TMEIC is a registered trademark of Toshiba Mitsubishi-Electric Industrial Systems
Corporation.
KE
Toshiba Mitsubishi-Electric Industrial
Systems Corporation
Mita 43 MT Bldg.
13-16 Mita 3 chome, Minato-ku Tokyo
108-0073 Japan
Tel.: +81-3-5444-3828
Fax: +81-3-5444-3820
Web: www.tmeic.co.jp
TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL
SYSTEMS (Beijing) CORPORATION
21/F., Building B, In.do Mansion
48 Zhichunlu A, Haidian District,
Beijing 100098, PRC
Tel.: +86 10 5873-2277
Fax: +86 10 5873-2208
Email: sales@tmeic-cn.com
KL
TMEIC Houston
2901 Wilcrest Dr.
Houston, TX 77042
Tel.: +1-713-784-2163
Fax.: +1-713-784-2842
Email: OilGas@tmeic.com
Web: www.tmeic.com
TMEIC Industrial Systems India Private Limited
Unit # 03-04, Third Floor,
Block 2, Cyber Pearl, HITEC City, Madhapur,
Hyderabad, 500081, Andhra Pradesh, India
Tel.: +91-40-44434-0000
Fax: +91-40-4434-0034
Email: inquiry_india@tmeic.com
Web: www.tmeic.in
60 (2.4)
Global Office Locations:
TMEIC Corporation
Office: 1325 Electric Road, Suite 200
Roanoke, VA, United States 24018
Mailing: 2060 Cook Drive
Salem, VA, United States 24153
Tel.: +1-540-283-2000
Fax: +1-540-283-2001
Email: info@tmeic.com
Web: www.tmeic.com
AIR OUT
TMEIC Motor Specifications
Induction Motors
Product
LV and MV
21-FII
Mill Motors
TM-AC
Synchronous Motors
MV Motors
21-L
MV Motors
21-MII
Vertical Motors
21-VL & VLL
High Speed
Main Drive Motor
High Power
High-Speed
(Custom design)
(Custom design)
(Custom design)
(Custom design)
300-6,500 kW
(8,700 hp)
1,840 kW
(2,460 hp)
12,000 kW
(16,090 hp)
Up to 80,000 kW
(107,240 hp)
Up to 80,000 kW
(107,240 hp)
Up to 11,900 rpm
Up to 1,540 rpm
Up to 3,600 rpm
Up to 6,200 rpm
Up to 6.6 kV
11 – 13.8 kV
7.0 kV
Totally Enclosed
Water to Air Cooled
– TEWAC
IC8A1W7/IP55
Totally Enclosed Water to
Air Cooled - TEWAC
IC8A1W7/IP55
Totally Enclosed Water
to Air Cooled - TEWAC
NA
Exp
Exp
Typical
View
Power
37-1,400 kW
(50-1,870 hp)
44-370 kW
(59-490 hp)
Up to 18,500 kW
(25,000 hp)
Up to 3,440 kW
(4,750 hp)
Speed
Up to 3,600 rpm
74 - 1,300 rpm
Up to 3,600 rpm
Up to 3,600 rpm
Up to 28 poles,
option > than 30 poles
Voltage
Up to 6,600 V
420 Vac max.
2,300 V – 13.8 kV
2,300 V – 11 kV
2,300 – 13.8 kV
Type
Totally Enclosed Fan
Cooled - TEFC
Area use
Exn, Extc, Exd
Rotor
Totally Enclosed Forced
Ventilated – TEFV.
Drip Proof Forced
Ventilated – DPFV.
Totally Enclosed Non
Ventilated - TENV
NA
Aluminum die cast rotor, or Aluminum die cast rotor, or
Copper rotor bars
Copper rotor bars
Drip Proof – DP.
Drip Proof – DP.
Weather Protected II- WP. Weather Protected II- WP.
Totally Enclosed Air to Air Totally Enclosed Air to Air
Cooled – TEAAC.
Cooled – TEAAC.
Totally Enclosed Water to Totally Enclosed Water to
Air Cooled - TEWAC
Air Cooled - TEWAC
Exn, Exe, Exp, Exd
Exn, Exe, Exp, Exd
3.3 - 11 kV
Totally Enclosed AirDrip Proof – DP.
Weather Protected II-WP. Air Cooled – TEAAC.
Totally Enclosed
Totally Enclosed Air- Air
Water to Air Cooled
Cooled – TEAAC.
– TEWAC
Totally Enclosed Water
(Blower ventilated)
to Air Cooled - TEWAC
Exn, Exe, Exp
Exn, Exe, Exp
Copper rotor bars
Aluminum die cast rotor
Copper rotor bars
Aluminum alloy
rotor bars
Copper rotor bars
Cylindrical solid rotor,
Two-pole
Cylindrical solid rotor,
Two-pole
Bearings
Ball and Roller bearings,
grease lubrication
Ball and Roller bearings,
grease lubrication
Ball and Roller bearings,
grease lubrication.
Sleeve bearings.
Ball and Roller bearings,
grease lubrication.
Sleeve bearings.
Antifriction bearings.
Tilting pad bearings.
Magnetic bearings
Tilting pad bearings
Sleeve bearings
Sleeve bearings
Sleeve bearings
Tilting pad bearings
Magnetic bearings
Length
920-2,720 mm
(36-107 inch)
1,074 mm to 1,792 mm
(42-71 inch)
2,400 mm and up
(95 inch and up)
1,580 mm to 4,130 mm
(62-163 inch)
2,500 mm to 6,000 mm
(98-236 inch)
Approx 2100 mm
(83 inch)
5550 mm to 7050 mm
(219-278 inch)
Approx 8100 mm
(319 inch)
8,100 mm
(319 inch)
Standards
IEC, NEMA, BS, AS...
IP44 to IP55
Based on JEC-2137
and IEC 60034-1
IEC, NEMA, BS, AS...
IP22, IP24W, IP44, IP55
IEC, NEMA, BS, AS...
IP22, IP24W, IP44, IP55
IEC, NEMA, BS, AS.
IEC, NEMA, BS, AS.
IEC, JEC.
IEC
IEC
Major
Applications
Fans, Blowers,
Compressors
Steel mills,
Aluminum mills
Fans, Blowers,
Compressors
Fans, Blowers,
Compressors
Metal rolling mills
Turbo compressors
(Induction motors also)
Blowers,
Compressors
Blowers,
Compressors
© 2011 TMEIC Corporation. All Rights Reserved.
Pumps
Gearless
Compressors
© 2011 TMEIC Corporation. All Rights Reserved.