Photocell
Class I Division 2
Ordering Information
Factory Installed Option
(add as suffix)
class 1 division 1
Photocontrol for Standard & Hazardous Class I Division 21
Catalog Number
Volts
Frequency
Watts
HUB2PC120
120VAC
50/60 Hz
400
HUB2PC227
277VAC
50/60 Hz
400
HUB2PC347
347VAC
50/60 Hz
400
2
1
2
Photocontrol cells for Class I Division 2 only
Marked 220-277V, suitable for 208V
Suffix
-P1
-P2
-P3
Field installed
in splice cap
Patented(#7,791,054)
Factory installed in ballast tank
Pendant Hangers
Fixture Hangers
• Ball joint permits fixture to
hang plumb; Fixture may swing
up to 20° from vertical in any
direction
• Cast of aluminum alloy (copperfree aluminum; less than 4/10
of 1%)
• Set screw locks fixture stem
in place; Cannot accidently
loosen – intended for use with
threaded metal conduit
• Joint cannot twist conductor
• Suitable for fixtures up to
125 pounds
Ordering Information
HLFKA
Catalog Number
HLFKA-22
Male Thread
3/4"
• Combination splice box and flexible fixture hanger
• Ball joint permits fixture to
hang plumb; Fixture may swing
up to 20° from vertical
• Cast of aluminum alloy (copperfree aluminum; less than 4/10
of 1%)
Fixture Stem Size
3/4"
HLFKA
HLFKA
• Set screw locks fixture stem in
place – intended for use with
threaded metal conduit
• Joint cannot twist conductors
• Cover may be removed for easy
wiring
• Mounts directly to conduit
• Suitable for fixtures up to
125 pounds
Ordering Information
HLFH
492
Catalog Number
Two Hubs Feed Thru
HLFHC-21
HLFHC-22
Voltage
120V
208-277V
347V
Catalog Number
Three Hubs T
HLFHT-21
HLFHT-22
Conduit
Size
3/4"
3/4"
Fixture
Stem Size
1/2"
3/4" HLFH
HLFH
Pendant Hangers
Fixture Hangers
• Combines splice box and hanger
in one unit; Splice box available
in four configurations
• Cast of corrosion resistant aluminum alloy (copper-free—less
than 4/10 of 1%)
• Supports up to 125 pounds
HLVGA
HLVGC
LHVGH
HLVGX
class 1 division 1
• Flexible fixture hanger for
threaded fixture stem
• Enclosed and gasketed, suitable
for wet locations
• Permits angular displacement of
fixture without twisting wires
• Cushioned—absorbs shock and
vibration. Internal strap assures
ground continuity
Ordering Information
Catalog Number
Hanger W/Splice Box
Splice Box Only
HLVPFHA-12
HLVGA-1
HLVPFHA-22
HLVGA-2
HLVPFHC-12
HLVGC-1
HLVPFHC-22
HLVGC-2
HLVPFHH-12
HLVGH-1
HLVPFHH-22
HLVGH-2
HLVPFHX-12
HLVGX-1
HLVPFHX-22
HLVGX-2
Hub
Size
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
Fixture
Stem Size
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
hub covers (for rigid mounting)
Ordering Information
Catalog Number
HLVPFH-2
HLVG-2
Description
Flexible hanger cover, maximum load 125lbs
Hub cover for rigid mounting
Fixture Stem Size
3/4"
3/4"
Flexible hanger covers
PENDANT HANGER APPLICATIONS
•Pendant hangers can be applied
for use in many industrial and
hazadous locations
• Splice box available in four
configurations for flexibility in
mounting and wiring
• Flexible hanger cover with
rubber gasket for mounting
fixtures in high vibration
hazardous locations
HLVGC
+
Flexible hanger
covers
+
=
Tribay® CH-EU
or similar
fixture
493
Pendant Hangers
Class 1 Division 1 Fixure Hangers
HLHXB SPLICE BOX AND HANGER
class 1 division 1
Class I, Div. 1 & 2, Groups C,D
Class l, Zones 1 & 2, Groups llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
HLHXB
• Fixture hanger for hazardous locations combining splice box and hanger
• Set screws in female hub prevents
accidental loosening of fixture stem; set screws in hub cover lock cover to the
splice box
• Four hubs in “X” configuration
up to 3⁄4"
• Flange mounting ring cast as integral part of
box
• Splice box wiring hole with cover for access
to box interior
• Cast of corrosion resistant aluminum
alloy (copper-free aluminum; less than 4/10
of 1%)
• Supports up to 125 pounds; vol. 16 cu.”
Ordering Information
Catalog Number
HLHXB-11
HLHXB-12
HLHXB-21
HLHXB-22
HLHXBC
Conduit Hub Size
1/2"
1/2"
3/4"
3/4"
Blank cover
HLEKJ FLEXIBLE PENDANT HANGER
HLEKJ
Class I, Div. 1 & 2, Groups A,B,C,D
Class l, Zones 1 & 2, Groups
llC,llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
• Fixture pendant hanger for
hazardous locations
• Permits free swing and plumb hang
• Set screws in each hub prevents accidental
loosening of fixture
Fixture Stem Size
1/2"
3/4"
1/2"
3/4"
Blank cover
• Constructed of seamless bronze hose
with brass outer braid. Asphaltum
impregnated jute inner insulates and
protects wire from abrasion. Brass
female end fittings are supplied with
short nipples
• Electrical ground continuity without
bonding jumper
• Suitable for wet locations as well as
hazardous locations
• Flexible lengths 4 to 18 inches
• Supports up to 125 pounds
Ordering Information
Catalog Number
HLEKJ-14
HLEKJ-24
HLEKJ-16
HLEKJ-26
HLEKJ-18
HLEKJ-28
HLEKJ-110
HLEKJ-210
HLEKJ-112
HLEKJ-212
HLEKJ-115
HLEKJ-215
HLEKJ-118
HLEKJ-218
494
Conduit Hub Size
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
Fixture Stem Size
4"
6"
8"
10"
12"
15"
18"
pendant Hangers
Class 1 Division 1 Fixture Hangers
HLXFH SPLICE BOX AND HANGER
• Fixture hanger for hazardous locations combining splice box and
hanger
class 1 division 1
Class I, Div. 1 & 2, Groups C,D
Class l, Zones 1 & 2, Groups llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
• Set screws in female hub prevents
accidental loosening of fixture
• Straight through conduit hubs
for through feed
• Mounting lugs are standard
• Cast of corrosion resistant aluminum
alloy (copper-free aluminum; less
than 4/10 of 1%)
• Supports to 125 pounds
Ordering Information
HLXFH
Catalog Number
HLXFH-21
HLXFH-22
Conduit Hub Size
3/4"
3/4"
Fixture Stem Size
1/2"
3/4"
HLJL/HLJAL SPLICE BOX AND HUB
COVER FIXTURE HANGER
Class I, Div. 1 & 2, Groups C,D
Class l, Zones 1 & 2, Groups llC,llB
Class II, Div. 1 & 2, Groups E,F,G
Class III
• Splice box and hub cover for mounting
pendant fixtures in hazardous
locations
• Conduit openings in two configurations
• Flange type cover; Set screw in hub
prevents accidental loosenings of
fixture stem
• Integral lugs for mounting box to ceiling
• Cast of corrosion resistant aluminum
alloy (copper-free aluminum; less than
4/10 of 1%)
• Supports up to 125 pounds
HLJL
Ordering Information
HLJAL
Catalog Number
HLJL Series W/Hub Cover
HLJAL Series W/Hub Cover
HLJLC-11
–
HLJLC-12
–
HLJLC-21
–
HLJLC-22
–
HLJLX-11
HLJALX-11
HLJLX-12
HLJALX-12
HLJLX-21
HLJALX-21
HLJLX-22
HLJALX-22
–
HLJALX-31
–
HLJALX-32
Conduit Box
1/2"
1/2"
3/4"
3/4"
1/2"
1/2"
3/4"
3/4"
1"
1"
Cover
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
1/2"
3/4"
Type
C Straight Through
X Four Hubs
DIMENSIONS
Series
HLJL
HLJAL
A
1-15/16"
(49 mm)
2-3/8"
(60 mm)
B
11/16"
(17 mm)
15/32"
(12 mm)
C
3-1/4"
(95 mm)
4-5/8"
(117 mm)
D
4-7/32"
(107 mm)
5-1/4"
(133 mm)
E
2-3/8"
(60 mm)
4-1/8"
(105 mm)
H
5/16"
(8 mm)
5/16"
(8 mm)
495