Tape and Reel Specifications

advertisement
RF Power Tape and Reel Specifications
Embossed Tape and Reel is used to facilitate automatic pick and place equipment feed requirements. The tape is used as the
shipping container for various products and requires a minimum of handling. The antistatic/conductive tape provides a secure
cavity for the product when sealed with the “peel--back” cover tape.
 Two Reel Sizes Available (7 and 13)
 Minimizes Product Handling
 Used for Automatic Pick and Place Feed Systems
 EIA 481, --1, --2
Use the standard device title and add the required suffix as listed in the option table on the following page. Note that the individual
reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimum lot size is
one full reel for each line item, and orders are required to be in increments of the single reel quantity.
DFN 2  2
QFN 3  3
(12 mm)
(12 mm)
PIN 1
PIN 1
QFN 4  4
SOT--89
(12 mm)
PIN 1
GATE
LEAD
(12 mm)
RF OUTPUT
PLD--1.5, PLD--1.5W
PQFN 5  5, PQFN 8  8
(16 mm)
(16 mm)
PIN 1
TO--270--2
TO--270G--2
(24 mm)
DRAIN
LEAD
(24 mm)
DRAIN
LEAD
DIRECTION
OF FEED
UPDATED JUNE 2014
Freescale Semiconductor, Inc.
RF Product Selector Guide
1
NI--400H--2S
(32 mm)
NI--780S--4L, OM--780--2L
NI--400S--2S
DRAIN
LEAD
(32 mm)
DRAIN
LEAD
TO--272--6, TO--272--6 Wrap,
TO--272--8, TO--272--8 Wrap (44 mm)
(32 mm)
DRAIN
LEAD
DRAIN
LEAD
TO--270WB--4, TO--270WBG--4, TO--270WBL--4,
TO--270WB--14, TO--270WB--16, TO--270WBL--16,
TO--272WB--4, TO--272WB--14, TO--272WB--16 (44 mm)
TO--270WBG--14, TO--270WBG--16
(44 mm)
DRAIN
LEAD
DRAIN
LEAD
DIRECTION
OF FEED
2
Freescale Semiconductor, Inc.
RF Product Selector Guide
,
NI--780H--2L, NI--780S--2L,
NI--780H--4L (56 mm)
NI--860
(56 mm)
DRAIN
LEAD
NI--880H--2L, NI--880S--2L
DRAIN
LEAD
NI--1230H--4S, NI--1230S--4S
(56 mm)
(56 mm)
DRAIN
LEAD
DRAIN
LEAD
NI--1230H--4S4S
NI--1230S--4S4S
(56 mm)
DRAIN
LEAD
(56 mm)
DRAIN
LEAD
DIRECTION
OF FEED
Freescale Semiconductor, Inc.
RF Product Selector Guide
3
RF EMBOSSED TAPE AND REEL ORDERING INFORMATION
Device
Suffix
(7)
1,000
T1
330
(13)
250
R3
330
(13)
250
R3
32.0  0.1 (1.26  .004)
330
(13)
250
R3
Package
Pitch
mm
(inch)
DFN 2  2
12
8.0  0.1 (.315  .004)
178
NI--400H--2S
32
32.0  0.1 (1.26  .004)
NI--400S--2S
32
32.0  0.1 (1.26  .004)
NI--780H--2L
56
Reel Size
mm
(inch)
NI--780S--2L
56
32.0  0.1 (1.26  .004)
330
(13)
250
R3
NI--780H--4L
56
32.0  0.1 (1.26  .004)
330
(13)
250
R3
NI--780S--4L
32
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--780S--2L2L
44
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--780S--2L4S
44
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--780S--4L4L
44
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--780S--4L4S
44
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--780GS--4L4S
44
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--860
56
56
28.0  0.1 (1.10  .004)
28.0  0.1 (1.10  .004)
330
330
(13)
(13)
250
50
R3
R5
NI--880H--2L
56
32.0  0.1 (1.26  .004)
330
(13)
250
R3
NI--880S--2L
56
32.0  0.1 (1.26  .004)
330
(13)
250
R3
NI--880XS--2L
56
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--880XGS--2L
56
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--880XS--2L4S
56
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--880XS--4L4S
56
28.0  0.1 (1.10  .004)
330
(13)
250
R3
NI--1230H--4S
56
56
32.0  0.1 (1.26  .004)
32.0  0.1 (1.26  .004)
330
330
(13)
(13)
150
50
R6
R5
NI--1230S--4S
56
56
32.0  0.1 (1.26  .004)
32.0  0.1 (1.26  .004)
330
330
(13)
(13)
150
50
R6
R5
NI--1230S--4L2L
56
32.0  0.1 (1.26  .004)
330
(13)
150
R6
NI--1230GS--4L
56
32.0  0.1 (1.26  .004)
330
(13)
150
R6
NI--1230H--4S4S
56
32.0  0.1 (1.26  .004)
330
(13)
150
R6
NI--1230S--4S4S
56
32.0  0.1 (1.26  .004)
330
(13)
150
R6
OM--780--2L
32
28.0  0.1 (1.10  .004)
330
(13)
250
R3
OM--780G--2L
32
28.0  0.1 (1.10  .004)
330
(13)
250
R3
OM--780--4L
32
28.0  0.1 (1.10  .004)
330
(13)
250
R3
OM--780G--4L
32
28.0  0.1 (1.10  .004)
330
(13)
250
R3
PLD--1.5
16
16
8.0  0.1 (.315  .004)
8.0  0.1 (.315  .004)
330
330
(7)
(7)
1,000
100
T1
R4
PLD--1.5W
16
16
8.0  0.1 (.315  .004)
8.0  0.1 (.315  .004)
330
330
(7)
(7)
1,000
100
T1
R4
PQFN 5  5
16
8.0  0.1 (.315  .004)
330
(13)
1,000
T1
PQFN 8  8
16
12.0  0.1 (.472  .004)
330
(13)
1,000
T1
QFN 3  3
12
8.0  0.1 (.315  .004)
178
(7)
1,000
T1
QFN 4  4
12
8.0  0.1 (.315  .004)
330
(13)
1,000
T1
QFN 6  6
16
12.0  0.1 (.472  .004)
178
(7)
1,000
R1
SOT--89(1)
12
8.0  0.1 (.315  .004)
178
(7)
1,000
T1
SOT--89(2)
12
8.0  0.1 (.315  .004)
180
(7)
1,000
T1
SOT--363
8
4.0  0.1 (.157  .004)
178
(7)
3,000
1. 98ASA10586D
2. 98ASA00241D
4
Devices Per Reel
and Minimum
Order Quantity
Tape Width
(mm)
T1
(continued)
Freescale Semiconductor, Inc.
RF Product Selector Guide
RF Embossed Tape and Reel Ordering Information
Package
Tape Width
(mm)
Pitch
mm
(inch)
(continued)
Reel Size
mm
(inch)
Devices Per Reel
and Minimum
Order Quantity
Device
Suffix
TO--270--2
24
16.0  0.1 (.631  .004)
330
(13)
500
R1
TO--270G--2
24
12.0  0.1 (.471  .004)
330
(13)
500
R1
TO--270WB--4
44
24.0  0.1 (.945  .004)
330
(13)
500
R1
TO--270WBL--4
44
20.0  0.1 (.788  .004)
330
(13)
500
R1
TO--270WBG--4
44
24.0  0.1 (.945  .004)
330
(13)
500
R1
TO--270WB--14
44
20.0  0.1 (.788  .004)
330
(13)
500
R1
TO--270WBG--14
44
16.0  0.1 (.631  .004)
330
(13)
500
R1
TO--270WBG--16
44
20.0  0.1 (.788  .004)
330
(13)
500
R1
TO--270WBG--16
44
16.0  0.1 (.631  .004)
330
(13)
500
R1
TO--270WBL--16
44
24.0  0.1 (.945  .004)
330
(13)
500
R1
TO--270WBLG--16
44
24.0  0.1 (.945  .004)
330
(13)
500
R1
TO--272--2
44
16.0  0.1 (.631  .004)
330
(13)
500
R1
TO--272--6
44
20.0  0.1 (.631  .004)
330
(13)
500
T1
TO--272--6 Wrap
44
20.0  0.1 (.631  .004)
330
(13)
500
T1
TO--272--8
44
20.0  0.1 (.787  .004)
330
(13)
500
T1
TO--272--8 Wrap
44
20.0  0.1 (.787  .004)
330
(13)
500
T1
TO--272WB--4
44
20.0  0.1 (.788  .004)
330
(13)
500
R1
TO--272WB--14
44
20.0  0.1 (.788  .004)
330
(13)
500
R1
TO--272WB--16
44
20.0  0.1 (.788  .004)
330
(13)
500
R1
TO--272WBLG--16
44
24.0  0.1 (.945  .004)
330
(13)
500
R1
Freescale Semiconductor, Inc.
RF Product Selector Guide
5
EMBOSSED TAPE AND REEL DATA FOR DISCRETES
CARRIER TAPE SPECIFICATIONS
P0
K
P2
D
t
E1
Top Cover
Tape
A0
K0
B1
10 Pitches Cumulative Tolerance on Tape
 0.2 mm
( 0.008)
F
W
B0
See
Note 1
P
For Machine Reference Only
Including Draft and RADII
Concentric Around B0
D1
For Components
2.0 mm x 1.2 mm and Larger
Center Lines
of Cavity
Embossment
User Direction of Feed
* Top Cover Tape
Thickness (t1)
0.10 mm
(.004) Max.
Bar Code Label
R Min
Tape and Components
Shall Pass Around Radius “R”
Without Damage
Bending Radius
10
Maximum Component Rotation
Embossed Carrier
100 mm
(3.937)
Embossment
1 mm Max
Typical Component
Cavity Center Line
Tape
1 mm
(.039) Max
Typical Component
Center Line
6
250 mm
(9.843)
Camber (Top View)
Allowable Camber To Be 1 mm/100 mm Nonaccumulative Over 250 mm
Freescale Semiconductor, Inc.
RF Product Selector Guide
DIMENSIONS
Tape
Size
12 mm
B1 Max
D
D1
E1
F
K
P0
P2
R Min
t Max
W
8.2 mm
(.323)
1.5 + 0.1 mm
-- 0.0
(.059 + .004
-- 0.0)
1.5 mm Min
(.059)
1.75  0.1 mm
(.069  .004)
5.5  0.05 mm
(.217  .002)
6.4 mm Max
(.252)
4.0  0.1 mm
(.157  .004)
2.0  0.1 mm
(.079  .004)
30 mm
(1.18)
0.4 mm
(.016)
12 mm
(.470)
4.0 mm
(.157)
DFN 2x2
QFN 3x3
1.2 mm Max
(.048)
2.0  0.5 mm
(.079  .002)
0.30 mm
(.012)
4.45 mm
(.175)
QFN 4x4
16 mm
5.1 mm
(.201)
SOT--89(1)
1.7 mm Min
(.068)
SOT--89(1)
-SOT--89(2)
1.5 mm Min
(0.059)
SOT--89(2)
5.5  0.1 mm
(.217  .004)
SOT--89(2)
2.0 mm Max
(.079)
SOT--89(2)
2.0  0.1 mm
(.079  .004)
SOT--89(2)
12.1 mm
(.476)
1.5 mm Min
(.059)
7.5  0.10 mm
(.295  .004)
7.9 mm Max
(.311)
2.0  0.1 mm
(.079  .004)
2.8 mm Max
(.110)
PQFN 5x5
4.0  0.2 mm
(.157  .001)
PQFN 5x5
2.0  0.5 mm
(.079  .002)
PQFN 5x5
8.4 mm
(.331)
PQFN 8x8
2.4 mm Max
(.094)
PQFN 8x8
4.0  0.1 mm
(.157  .004)
2.0  0.1 mm
(.079  .004)
6.3 mm
(.25)
QFN 6x6
20.1 mm
(.791)
11.1 mm
(.437)
TO--270G--2
32 mm
12 mm
(.470)
SOT--89(1)
6.1 mm
(.241)
PQFN 5x5
7.37 mm
(.29)
PLD--1.5
PLD--1.5W
24 mm
1.9 mm Max
(.076)
SOT--89(1)
1.75  0.1 mm
(.069  .004)
11.5  0.1 mm
(.453  .004)
11.9 mm Max
(.468)
4.0  0.1 mm
(.157  .004)
2.0  0.1 mm
(.079  .004)
30 mm
(1.18)
2.82 mm Max
(.111)
TO--270G--2
23.0 mm
(.906)
14.2  0.1 mm
(.559  .004)
2.0 mm Min
(.079)
4.6 mm
(.181)
NI--360S
5.1 mm Max
(.201)
NI--780S--4L
OM--780--2L
18 mm
(.709)
NI--400H--2S
NI--400S--2S
1.50  0.1 mm
-- 0.0
(.061 + .002
-- 0.0)
3.7 mm
(.146)
NI--400H--2S
NI--400S--2S
20.9 mm
(.823)
OM--780G--2L
OM--780--4L
OM--780G--4L
1.55  0.05 mm
-- 0.0
(.061 + .002
-- 0.0)
5 mm
(.197  .04)
OM--780G--2L
OM--780--4L
OM--780G--4L
16 mm
(.630)
0.3 mm
(.018)
PLD--1.5
PLD--1.5W
QFN 6x6
1.1  0.1 mm
(.043  .04)
QFN 6x6
1.5 + 0.1 mm
-- 0.0
(.059 + .004
-- 0.0)
0.4 mm
(.016)
0.30 mm
(.012)
PQFN 5x5
PQFN 8x8
1.91  0.1 mm
(.075  .04)
PLD--1.5
PLD--1.5W
1.55  0.05
mm
-- 0.0
(.061 + .002
-- 0.0)
21 mm
(.827)
NI--780S--4L
OM--780--2L
30 mm
(1.18)
0.4 mm
(.016)
24.3 mm
(.957)
0.338 mm
(.013)
TO--270G--2
50 mm
(1.969)
0.6 mm
(.024)
32.2 mm
(1.272)
0.3 mm
(.012)
32 mm
(1.26)
0.3 mm
(.018)
1. 98ASA10586D
2. 98ASA00241D
Metric dimensions govern — English are in parentheses for reference only.
NOTE 1: A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to .50 mm max.,
NOTE 1: the component cannot rotate more than 10 within the determined cavity.
NOTE 2: Pitch information is contained in the Embossed Tape and Reel Ordering Information on pg. 4.
(continued)
Freescale Semiconductor, Inc.
RF Product Selector Guide
7
DIMENSIONS (continued)
Tape
Size
44 mm
B1 Max
D
D1
E1
F
K
P0
P2
R Min
t Max
W Max
35.0 mm
(1.378)
1.5 + 0.1 mm
-- 0.0
(.059 + .004
-- 0.0)
2.0 mm Min
(.079)
1.75  0.1 mm
(.069  .004)
11.5  0.1 mm
(.453  .004)
15.9 mm Max
(.625)
4.0  0.1 mm
(.157  .004)
2.0  0.15 mm
(.079  .006)
50 mm
(1.969)
0.6 mm
(.024)
44 mm
(1.732)
20.2+ 0.15 mm
(0.795 .006)
2.92 mm
(.115)
TO--272WB--4,
TO--272WB--16
20.0 0.1 mm
(.788  .004)
TO--272WB--4,
TO--272WB--16
.318 mm
(.012)
TO--272WB--4,
TO--272WB--16
23.77 mm
(.936)
TO--270WBG--14,
TO--270WBG--16
3.20 mm
(.126)
16.0 0.1 mm
(.630  .004)
.343 mm
(.013)
25.8  0.1 mm
(1.016  .004)
TO--270WBL--16
4.2  0.1 mm
(0.165  .004)
TO--270WBL--16
24.0  0.1 mm
(.945  .004)
TO--270WBL--16
25.8 mm
(1.016)
TO--270WBLG--16
4.2 mm
(0.165  .04)
TO--270WBLG--16
4.0  0.1 mm
(.157  .004)
0.32 mm
(.012)
TO--270WBL--16
TO--270WBLG--16
28 mm
(1.102)
NI--780S--2L2L
NI--780S--2L4S
NI--780S--4L4L
5 mm
(0.197  .04)
NI--780S--2L2L
NI--780S--2L4S
NI--780S--4L4L
24.0 mm
(.946)
TO--270WBL--4,
TO--272WB--4,
TO--270WB--14,
TO--270WB--16,
TO--272WB--14,
TO--272WB--16
56 mm
34.7 mm
(1.366)
NI--780H--2L
NI--780S--2L
NI--860
NI--880H--2L
NI--880S--2L
1.5 + 0.1 mm
-- 0.0
(.059 + .004
-- 0.0)
2.0 mm Min
(.079)
1.75  0.1 mm
(.069  .004)
26.2  0.15 mm
(1.031  .006)
NI--780H--2L
NI--780S--2L
NI--860
NI--880H--2L
NI--880S--2L
4.5 mm
(0.177)
NI--780H--2L
NI--780S--2L
2.0  0.1 mm
(.079  .004)
0.35 mm
(.014)
NI--780S--2L2L
NI--780S--2L4S
NI--780S--4L4L
4.0  0.1 mm
(.157  .004)
5.0 mm
(0.197)
NI--860
2.0  0.15 mm
(.079  .006)
NI--780H--2L
NI--780S--2L
NI--860
NI--880H--2L
NI--880S--2L
50 mm
(1.969)
0.6 mm
(.024)
NI--780H--2L
NI--780S--2L
NI--860
NI--880H--2L
NI--880S--2L
56 mm
(2.205)
5.23 mm
(0.206)
NI--880H--2L
NI--880S--2L
35.25 mm
(1.388)
NI--780H--4L
41.6 mm
(1.64)
NI--1230H--4S
NI--1230S--4S
NI--1230H--4S4S
39.9 mm
(1.57)
NI--1230S--4S4S
31 mm
(1.22)
NI--880XS--2L
NI--880XGS--2L
NI--880XS--2L4S
NI--880XS--4L4S
14.2  0.1 mm
(.559  .004)
NI--780H--4L
5.1 mm
(.201)
NI--780H--4L
5.2 mm
26.2  0.15 mm
(0.205)
(1.031  .006)
NI--1230H--4S
NI--1230H--4S
NI--1230S--4S
NI--1230S--4S
NI--1230H--4S4S
6.5 mm
NI--1230S--4S4S
(0.256)
NI--880XS--2L
NI--880XGS--2L NI--1230H--4S4S
NI--880XS--2L4S
6.15 mm
NI--880XS--4L4S
(0.242)
NI--1230S--4L2L NI--1230S--4S4S
NI--1230GS--4L
5 mm
(0.197  .04)
NI--880XS--2L
NI--880XGS--2L
NI--880XS--2L4S
NI--880XS--4L4S
41.55 mm
1.55 + 0.05 mm
(1.636)
-- 0.0
NI--1230S--4L2L (.061 + .002
NI--1230GS--4L
-- 0.0)
6.15  0.15 mm
(0.242  .06)
NI--1230S--4L2L
NI--1230GS--4L
2.0  0.1 mm
(.079  .004)
NI--780H--4L
0.4 mm
(.016)
NI--780H--4L
2.0  0.15 mm
(.079  .006)
NI--1230H--4S
NI--1230S--4S
0.6 mm
(.024)
NI--1230H--4S
NI--1230S--4S
2.0  0.1 mm
(.079  .004)
NI--1230H--4S4S
NI--1230S--4S4S
NI--880XS--2L
NI--880XGS--2L
NI--880XS--2L4S
NI--880XS--4L4S
NI--1230S--4L2L
NI--1230GS--4L
0.4 mm
(.016)
NI--1230H--4S4S
NI--1230S--4S4S
0.35 mm
(.014)
NI--880XS--2L
NI--880XGS--2L
NI--880XS--2L4S
NI--880XS--4L4S
0.4 mm
(.016)
NI--1230S--4L2L
NI--1230GS--4L
Metric dimensions govern — English are in parentheses for reference only.
NOTE 1: A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to .50 mm max.,
NOTE 1: the component cannot rotate more than 10 within the determined cavity.
NOTE 2: Pitch information is contained in the Embossed Tape and Reel Ordering Information on pg. 4.
8
Freescale Semiconductor, Inc.
RF Product Selector Guide
EMBOSSED TAPE AND REEL DATA FOR DISCRETES
T Max
Outside Dimension
Measured at Edge
1.5 mm Min
(.06)
A
13.0 mm  0.5 mm
(.512  .002)
20.2 mm Min
(.795)
50 mm Min
(1.969)
Full Radius
G
Size
A Max
G
T Max
12 mm
330 mm
(12.992)
12.4 mm + 2.0 mm, -- 0.0
(.49 + .079, -- 0.00)
18.4 mm
(.72)
12 mm
DFN 2x2
QFN 3x3
QFN 4x4
178 mm
(7)
12.4 mm + 2.0 mm, -- 0.0
(.49 + .079, -- 0.00)
18.4 mm
(.72)
12 mm
SOT--89
178 mm
(7)
13.5 mm
(.53)
16.5 mm
(.65)
16 mm
330 mm
(12.992)
16.4 mm + 2.0 mm, -- 0.0
(.646 + .078, -- 0.00)
22.4 mm
(.882)
16 mm
PQFN 5x5
PQFN 8x8
360 mm
(14.173)
16.4 mm + 2.0 mm, -- 0.0
(.646 + .078, -- 0.00)
22.4 mm
(.882)
24 mm
330 mm
(12.992)
24.4 mm + 2.0 mm, -- 0.0
(.961 + .070, -- 0.00)
30.4 mm
(1.197)
32 mm
330 mm
(12.992)
32.4 mm + 2.0 mm, -- 0.0
(1.276+ 0.79, -- 0.00)
38.4 mm
(1.512)
44 mm
330 mm
(12.992)
44.4 mm + 2.0 mm, -- 0.0
(1.748+ 0.79, -- 0.00)
50.4 mm
(1.984)
44 mm
TO--270:
WB--4, WBL--4, WB--14,
WBG--14, WB--16,
WBG--16, WBL--16
TO--272:
WB--4, WB--14, WB--16,
WBG--16
56 mm
Freescale Semiconductor, Inc.
RF Product Selector Guide
Inside Dimension
Measured Near Hub
45.3 mm + 0.5 mm, -- 0.0
(1.785+ 0.02, -- 0.00)
330 mm
(12.992)
56.3 mm + 2.0 mm, -- 0.0
(2.217+ 0.79, -- 0.00)
62.4 mm
(2.46)
9
Reel Dimensions
Metric Dimensions Govern — English are in parentheses for reference only
Overall LG
Item 3.1.2
Kraft Paper
Reel
B
Roll Pad
Container
Tape, Blue
Item 3.2
(Cathode)
A
Item 3.1.1
Max Off
Alignment
E
Item 3.3.5
Both Sides
Tape, White
Item 3.2
(Anode)
Figure 1. Reel Packing
D1
D2
0.250
Item 3.3.2
0.031
Item 3.3.5
Figure 2. Component Spacing
Optional Design
1.188
3.5 Dia.
Item 3.4
D
C
Figure 3. Reel Dimensions
10
Freescale Semiconductor, Inc.
RF Product Selector Guide
How to Reach Us:
Home Page:
freescale.com
Web Support:
freescale.com/support
Information in this document is provided solely to enable system and software
implementers to use Freescale products. There are no express or implied copyright
licenses granted hereunder to design or fabricate any integrated circuits based on the
information in this document.
Freescale reserves the right to make changes without further notice to any products
herein. Freescale makes no warranty, representation, or guarantee regarding the
suitability of its products for any particular purpose, nor does Freescale assume any
liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or incidental
damages. “Typical” parameters that may be provided in Freescale data sheets and/or
specifications can and do vary in different applications, and actual performance may
vary over time. All operating parameters, including “typicals,” must be validated for
each customer application by customer’s technical experts. Freescale does not convey
any license under its patent rights nor the rights of others. Freescale sells products
pursuant to standard terms and conditions of sale, which can be found at the following
address: freescale.com/SalesTermsandConditions.
Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc.,
Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their
respective owners.
E 2014 Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc.
RF Product Selector Guide
11
Download