1
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
SCOPE
This document lists the underground cables and cable accessories which are Approved for
connection to the SP Distribution ltd, SP Manweb plc and SP Transmission ltd networks. The
categories of equipment covered by this document include the following:Cables.
Jointing & Terminating Accessories and consumables.
Ducts, Warning Tapes and Tiles.
Users should always ensure that they are referring to the latest issue of this document.
2
ISSUE RECORD
This is a Controlled document. The current version is held on the Energy Networks Intranet
Document Library.
It is your responsibility to ensure you work to the current version.
Issue Date
Issue No
Author
Amendment Details
February 2011
Issue 7
Clark Sherry
Reviewed and updated to include new
equipment.
March 2012
Issue 8
Clark Sherry
Change to 33kV joint part numbers,
and General Updates
March 2012
Issue 9
Clark Sherry
Correction to 33kV joint part numbers
July 2013
Issue 10
Clark sherry
Updated to include new equipment and
remove obsolete equipment and also
to reflect new LV joints and
terminations.
December 2014
Issue 11
Gordon MacKenzie
Removal of Radius supplied cable
ducting.
3
ISSUE AUTHORITY
Author
Owner
Issue Authority
Gordon MacKenzie
Jason Morgan
Donald Miller
Senior Engineer
Cables & Overhead Lines
Asset Manager
Head of Asset Management
Digitally signed by:
Donald Miller
DN: CN = Donald
Miller email = donald.
miller@scottishpower.
com C = GB O =
SPEN OU = ASNP
Date: 2014.12.05 09:
56:24 Z
Date……………………………..
© SP Power Systems Limited
Page 1 of 54
4
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
REVIEW
This is a Controlled document and shall be reviewed in 5 years from the last issue date or as required
by Approval of new equipment and materials or as items are removed from the Approved list.
DISTRIBUTION
This document is part of the SP Distribution & SP Manweb System Design Virtual Manuals but does
not have a maintained distribution list. It is also published to the Internet.
CONTENTS
1
SCOPE ........................................................................................................................................... 1
2
ISSUE RECORD ............................................................................................................................ 1
3
ISSUE AUTHORITY ....................................................................................................................... 1
4
REVIEW ......................................................................................................................................... 2
DISTRIBUTION ....................................................................................................................................... 2
5
REFERENCES ............................................................................................................................... 5
5.1
POWERSYSTEMS TECHNICAL SPECIFICATIONS .......................................................................... 5
5.2
POWERSYSTEMS DRAWINGS .................................................................................................... 5
5.3
BRITISH STANDARDS (BS) ........................................................................................................ 6
5.4
ELECTRICITY ASSOCIATION TECHNICAL SPECIFICATIONS (EATS) ............................................... 6
5.5
ELECTRICITY ASSOCIATION ENGINEERING RECOMMENDATIONS (ER) ......................................... 6
5.6
INTERNATIONAL ELECTROTECHNICAL COMMISSION .................................................................... 6
5.7
CENELEC .............................................................................................................................. 6
6
GLOSSARY ................................................................................................................................... 7
7
EQUIPMENT APPROVAL CATEGORIES .................................................................................... 8
8
STANDARD REQUIREMENTS ..................................................................................................... 8
8.1
33KV, 11KV, LOW VOLTAGE, MULTICORE AND MULTIPAIR CABLES............................................. 8
8.2
PLASTIC DUCTS FOR UNDERGROUND CABLES ........................................................................... 8
8.3
PLASTIC WARNING TAPES AND TILES.......................................................................................... 8
8.4
11KV AND 33KV JOINT AND TERMINATION KITS.......................................................................... 8
8.5
LV JOINT AND TERMINATION KITS .............................................................................................. 8
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-29.8
8.6
9
GENERAL W IRING CABLES........................................................................................................ 9
APPROVED DUCTS, WARNING TAPES AND TILES ............................................................... 13
9.1
PLASTIC DUCTS & ACCESSORIES FOR UNDERGROUND CABLE ................................................. 13
9.1.1 The following list of Approved plastic ducts and associated accessories are all
manufactured and supplied by Emtelle ........................................................................................ 13
9.2
DUCT SEALING SYSTEMS ....................................................................................................... 16
© SP Power Systems Limited
Page 2 of 54
9.3
10
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
W ARNING TAPES AND TILES .................................................................................................... 17
APPROVED JOINTS & TERMINATIONS ................................................................................... 18
10.1
33KV JOINTS ......................................................................................................................... 18
10.1.1
33kV Straight & Branch joints for XLPE 1-core cables ............................................... 18
10.1.2
33kV Transition Straight Joints for XLPE to PILC Cables .......................................... 18
10.1.3
33kV Pot End Module Kits .......................................................................................... 19
10.2
33KV TERMINATIONS.............................................................................................................. 20
10.2.1
33kV Indoor Terminations for 1-core XLPE cables ..................................................... 20
10.2.2
33kV Outdoor Terminations for XLPE 1-core cables .................................................. 21
10.2.3
33kV "Inner cone" Connectors for XLPE 1-core cables .............................................. 21
10.2.4
33kV Transformer Separable Tee connectors and couplers for XLPE 1-core cables 21
10.2.5
33kV Guroflex terminations ......................................................................................... 22
10.3
33KV SUPPLEMENTARY & CONNECTOR MODULES ................................................................... 22
10.4
11KV JOINTS ......................................................................................................................... 23
10.4.1
11kV Straight Joints for XLPE cables ......................................................................... 23
10.4.2
11kV Transition Straight Joints for XLPE to PILC/PICAS cables ............................... 24
10.4.3
11kV Trifurcating Straight Joints for XLPE cables ...................................................... 25
10.4.4
11kV Transition Trifurcating Straight Joints for XLPE to PILC/PICAS cables ............ 25
10.4.5
11kV Pot End Module Kits .......................................................................................... 25
10.4.6
11kV Loop Joint Module Kits (XLPE-XLPE) ............................................................... 26
10.4.7
11kV Transition Loop Joint Kits (XLPE-PILC/PICAS)................................................. 26
10.4.8
11kV Branch Joints (XLPE-XLPE) .............................................................................. 27
10.4.9
11kV Transition Branch Joints (XLPE onto PILC/PICAS)........................................... 27
10.5
11KV SUPPLEMENTARY & CONNECTOR MODULES ................................................................... 28
10.6
11KV TERMINATIONS.............................................................................................................. 29
10.6.1
Indoor Terminations .................................................................................................... 29
10.6.2
Separable "Elbow" & "T" Connectors .......................................................................... 30
10.6.3
Outdoor Terminations ................................................................................................. 30
10.6.4
11kV Guroflex terminations ......................................................................................... 31
10.7
APPROVED LV JOINT KITS & COMPONENTS ........................................................................... 32
10.7.1
LV Service Cable Straight Joints ................................................................................ 32
10.7.2
LV Service Cable Stop Ends ....................................................................................... 32
10.7.3
LV Service Cable Cut, Test and Remake or branch joint ........................................... 32
10.7.4
LV Service OH Lines terminations .............................................................................. 33
10.7.5
LV Mains/Service branch joint .................................................................................... 33
10.7.6
LV Mains Straight Joints ............................................................................................. 34
10.7.7
LV Transformer Single Core Cable Straight Joint ....................................................... 34
10.7.8
LV Mains Branch Joints .............................................................................................. 34
© SP Power Systems Limited
Page 3 of 54
11
13
Cables and Cable Accessories
Issue No. 11
LV Mains Loop Joints .................................................................................................. 35
10.7.10
LV Mains Three Loose End Joints .............................................................................. 35
10.7.11
LV Mains Stop End Joints ........................................................................................... 36
10.7.12
LV Mains OH Lines Terminations ............................................................................... 36
10.7.13
LV Mains Re-Enterable Joints .................................................................................... 37
10.8
LV SUPPLEMENTARY & CONNECTOR MODULES ....................................................................... 37
10.9
LV ABANDONMENT KITS ......................................................................................................... 41
APPROVED LV LINK BOXES & SERVICE DISTRIBUTION UNITS ......................................... 41
11.1
LV LINK BOXES ...................................................................................................................... 41
11.2
LV SERVICE DISTRIBUTION UNIT ............................................................................................. 42
11.3
CABLE SEALING CAPS ............................................................................................................ 43
11.3.1
Heatshrink cable sealing caps .................................................................................... 43
11.3.2
Coldshrink cable sealing caps .................................................................................... 43
APPROVED TAPES .................................................................................................................. 44
APPROVED ISOCYANATE FREE RESINS ............................................................................... 45
12.1
PERMANENT RESINS .............................................................................................................. 45
12.2
TEMPORARY RE-ENTERABLE RESINS ...................................................................................... 45
APPROVED PLUMBING METALS ............................................................................................. 45
13.1
14
CAB-06-001
10.7.9
11.4
12
Approved Equipment Register
SOLDER AND PLUMBING METAL .............................................................................................. 45
APPROVED CABLES UP TO AND INCLUDING 33KV ............................................................. 46
14.1
APPROVED MANUFACTURER REFERENCES.............................................................................. 46
14.2
33KV CABLES ........................................................................................................................ 47
14.2.1
14.3
2
XLPE Insulated Single Core with 50mm Copper Wire Screen. ................................. 47
11KV CABLES ........................................................................................................................ 47
14.3.1
XLPE Insulated Single Core cables ............................................................................ 47
14.3.2
XLPE Insulated Three Core cables ............................................................................. 48
14.3.3
XLPE Insulated 1-core cables with LSOH Oversheath (Orange) ............................... 48
14.4
LOW VOLTAGE CABLES .......................................................................................................... 48
14.4.1
3-core & 4-core Waveform cable with Copper CNE or Earth conductor .................... 48
14.4.2
3-core & 4–core solid sectoral Aluminium Mains cable with concentric Copper CNE or
Earth conductor and LSOH Oversheath (Orange) ....................................................................... 49
15
14.4.3
LV Substation Cables, Single Core............................................................................. 49
14.4.4
Service Cables ............................................................................................................ 50
14.4.5
Service cables with LSOH Oversheaths (Orange) ..................................................... 50
14.5
MULTI CORE CABLES ............................................................................................................. 51
14.6
MULTI PAIR CABLES ............................................................................................................... 51
CABLE SYSTEMS FOR USE AT 132 KV AND ABOVE ............................................................ 53
15.1
132KV XLPE CABLES AND ASSOCIATED ACCESSORIES ............................................................ 53
© SP Power Systems Limited
Page 4 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
15.2
275KV XLPE CABLES AND ASSOCIATED ACCESSORIES ............................................................ 54
15.3
400KV XLPE CABLES AND ASSOCIATED ACCESSORIES ............................................................ 54
5
5.1
REFERENCES
PowerSystems Technical Specifications
CAB-03-020
CAB-03-027
CAB-03-028
CAB-03-029
CAB-03-031
CAB-03-039
5.2
Technical Specification for power cables up to and including 33kV and
associated auxiliary cables..
Technical Specification for Joints & Terminations on 11kV & 33kV Polymeric
Insulated cables.
Specification for ducting for power cables
Technical Specification for Joint Kits on Low Voltage Cables
Specification for 132kV cable and Accessories’
Technical Specification for tapes and mastics.
PowerSystems Drawings
00012642
00031148
00247207
00401952
Service cable lead-in tube (Hockey stick).
Hockey stick details (D.C.M. version).
Arrangement of polythene insulated telephone cables ScottishPower.
Ducting for fibre optic cables
© SP Power Systems Limited
Page 5 of 54
5.3
BS 6234
BS 6346
BS 7870
BS EN 50393
BS EN 29453
EATS 12-24
Specification of purchasing requirements for flux-cored and solid soft solder
wire.
Specification for polyethylene insulation and sheaths of electric cables.
Specification for armoured electric cables having PVC insulation.
LV and MV polymeric-S insulated cables for use by distribution and
generation utilities (Implementation of HD 603, 604, 605, 620, 622, 626 and
627).
Test methods and requirements for accessories for use on distribution cables
of rated voltage 0,6/1,0 (1,2) kV.
Soft solder alloys. Chemical composition and forms.
Polyethylene warning tape and protection tape for buried electricity supply
cable.
Plastic ducts for buried electrical cables.
Type approved tests for joints for 600/1000 volt cable systems.
Type approval tests for mechanical connections to metallic sheaths of cables.
International Electrotechnical Commission
IEC 61238
5.7
Issue No. 11
Electricity Association Engineering Recommendations (ER)
ER C81
ER C93
5.6
Cables and Cable Accessories
Electricity Association Technical Specifications (EATS)
EATS 12-23
5.5
CAB-06-001
British Standards (BS)
BS 441
5.4
Approved Equipment Register
Compression and mechanical connectors for power cables for rated voltages
up to 36kV
CENELEC
HD629
Test requirements on accessories for use on power cables of rated voltage 636kV
-Part 1 Cables with Extruded Insulation
-Part 2 Cables with impregnated insulation
© SP Power Systems Limited
Page 6 of 54
6
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
GLOSSARY
For the purpose of this Specification the following definitions shall apply: -
The Company
Refers to SP Distribution Ltd, SP Transmission Ltd and SP Manweb plc.
SP Distribution
The Distribution Licence Holder for the distribution service area formerly
known as ScottishPower.
SP Transmission
The Transmission Licence Holder for the transmission service area formerly
known as ScottishPower.
SP Manweb plc
The Distribution Licence Holder for the distribution service area formerly
known as Manweb.
Energy Networks
The brand name for the division of ScottishPower group of Companies that
encompasses SP Distribution Ltd, SP Transmission Ltd, SP Manweb plc and
SP Power Systems Ltd.
The Engineer
The Energy Networks nominated representative having authority over
technical matters contained in this specification.
Approved
Equipment approved in accordance with the Energy Networks Equipment
Approvals Procedure and which is considered suitable for installation on The
Company’s networks.
The Tenderer
The supplier invited to submit a tender in accordance with this specification.
PILC
Paper Insulated Lead Covered cable.
PICAS
Paper Insulated Corrugated Aluminium Sheathed cable.
XLPE
Cross-Linked Polyethylene
LSOH
Low Smoke Zero Halogen sheathed cable
MDPE
Medium Density Polyethylene
HDPE
High Density Polyethylene
PE
Polyethylene
SAC
Solid Aluminium Conductor
N/E
Neutral Earth
CNE
Combined Neutral Earth
SNE
Separate Neutral and Earth
© SP Power Systems Limited
Page 7 of 54
7
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
EQUIPMENT APPROVAL CATEGORIES
Cables and cable accessories listed in the Approved Equipment Register may, where appropriate,
have been assigned particular Approval categories. The categories are defined below:
Category S – Category S equipment is that for which approval has been granted only for a specific
contract or site.
Category A – Category A equipment is that which is fully Approved for use on the SP Distribution ltd,
SP Manweb plc and SP Transmission ltd networks.
Where no approval category is indicated in the attached tables then Category A approval may be
assumed.
8
STANDARD REQUIREMENTS
Only equipment listed as Approved in the Appendices to this document may be installed on the
Company’s networks. Items not listed in the Appendices may be considered for Approval by the
Company, however, the Approval process may take some time and a charge for this work may be
made.
8.1
33kV, 11kV, Low Voltage, Multicore and Multipair Cables
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-020.
8.2
Plastic Ducts for Underground Cables
Shall comply with the requirements of in SP Energy Networks Technical Specification CAB-03-028.
8.3
Plastic warning tapes and tiles
Shall comply as appropriate with the requirements of EATS 12-23.
8.4
11kV and 33kV Joint and Termination kits
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-27.
8.5
LV Joint and Termination kits
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-29.
© SP Power Systems Limited
Page 8 of 54
8.6
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
General Wiring Cables
All non-network general wiring cables require BASEC product and manufacturer certification.
SAP Number
Description (short text)
Supplier Reference Number
2
6491B1/5
2
6491B1/5
2
6491B1/5
2
6491B1/5
2
1.5 sqmm stranded Copper (Green/Yellow)
6491B1/5
30980080
2.5 sqmm² stranded Copper (Brown)
6491B2/5
30980081
2.5 sqmm² stranded Copper (Black)
6491B2/5
30980077
2.5 sqmm² stranded Copper (Grey)
6491B2/5
2.5 sqmm² stranded Copper (Blue)
6491B2/5
2.5 sqmm² stranded Copper (Green/Yellow)
6491B2/5
1.5 sqmm stranded Copper (Brown)
1.5 sqmm stranded Copper (Black),
1.5 sqmm stranded Copper (Grey)
1.5 sqmm stranded Copper (Blue)
30980078
30980054
4.0 sqmm² stranded Copper (Brown)
6491B4
4.0 sqmm² stranded Copper (Black)
6491B4
4.0 sqmm² stranded Copper (Grey)
6491B4
4.0 sqmm² stranded Copper (Blue)
6491B4
4.0 sqmm² stranded Copper (Green/Yellow)
6491B4
6.0 sqmm² stranded Copper (Brown)
6491B6
6.0 sqmm² stranded Copper (Black)
6491B6
6.0 sqmm² stranded Copper (Grey)
6491B6
6.0 sqmm² stranded Copper (Blue)
6491B6
6.0 sqmm² stranded Copper (Green/Yellow)
6491B6
© SP Power Systems Limited
Page 9 of 54
30980055
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
10.0 sqmm² stranded Copper (Brown)
6491B10
10.0 sqmm² stranded Copper (Black)
6491B10
10.0 sqmm² stranded Copper (Grey)
6491B10
10.0 sqmm² stranded Copper (Blue)
6491B10
10.0 sqmm² stranded Copper (Green/Yellow)
6491B10
16.0 sqmm² stranded Copper (Brown)
6491B16
16.0 sqmm² stranded Copper (Black)
6491B16
16.0 sqmm² stranded Copper (Grey)
6491B16
16.0 sqmm² stranded Copper (Blue)
6491B16
16.0 sqmm² stranded Copper (Green/Yellow)
6491B16
25.0 sqmm² stranded Copper (Brown)
6491B25
25.0 sqmm² stranded Copper (Black)
6491B25
25.0 sqmm² stranded Copper (Grey)
6491B25
25.0 sqmm² stranded Copper (Blue)
6491B25
25.0 sqmm² stranded Copper (Green/Yellow)
6491B25
35.0 sqmm² stranded Copper (Brown)
6491B35
35.0 sqmm² stranded Copper (Black)
6491B35
35.0 sqmm² stranded Copper (Grey)
6491B35
30980058
35.0 sqmm² stranded Copper (Blue)
6491B35
30980059
35.0 sqmm² stranded Copper (Green/Yellow)
6491B35
50.0 sqmm² stranded Copper (Brown)
6491B50
50.0 sqmm² stranded Copper (Black)
6491B50
50.0 sqmm² stranded Copper (Grey)
6491B50
30980057
© SP Power Systems Limited
Page 10 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
50.0 sqmm² stranded Copper (Blue)
6491B50
50.0 sqmm² stranded Copper (Green/Yellow)
6491B50
70.0 sqmm² stranded Copper (Brown)
6491B70
70.0 sqmm² stranded Copper (Black)
6491B70
70.0 sqmm² stranded Copper (Grey)
6491B70
30980060
70.0 sqmm² stranded Copper (Blue)
6491B70
30980061
70.0 sqmm² stranded Copper (Green/Yellow)
6491B70
95.0 sqmm² stranded Copper (Brown)
6491B95
95.0 sqmm² stranded Copper (Black)
6491B95
95.0 sqmm² stranded Copper (Grey)
6491B95
95.0 sqmm² stranded Copper (Blue)
6491B95
95.0 sqmm² stranded Copper (Green/Yellow)
6491B95
120.0 sqmm² stranded Copper (Brown)
6491B120
120.0 sqmm² stranded Copper (Black)
6491B120
120.0 sqmm² stranded Copper (Grey)
6491B120
120.0 sqmm² stranded Copper (Blue)
6491B120
120.0 sqmm² stranded Copper (Green/Yellow)
6491B120
150.0 sqmm² stranded Copper (Brown)
6491B150
150.0 sqmm² stranded Copper (Black)
6491B150
150.0 sqmm² stranded Copper (Grey)
6491B150
150.0 sqmm² stranded Copper (Blue)
6491B150
150.0 sqmm² stranded Copper (Green/Yellow)
6491B150
FP 1.5 sqmm 3 Core and earth
© SP Power Systems Limited
FP3X1/5
Page 11 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
FP 2.5 sqmm 2 Core and earth
FP2X2/5
1.0 sqmm 2 Core and earth (3 core)
3183TQ1
1.5 sqmm 2 Core and earth (3 core)
3183TQ1/5
1.5 sqmm 3 Core and earth (4 core)
3184TQ1/5
30980075
2.5 sqmm 2 Core and earth (3 core)
3183TQ2/5
30980072
37/2.03 120sq mm Grey/Brown Double insulated
6181B120 37/2.03
30980073
37/2.03 120sq mm Grey/Blue Double insulated
6181B120 37/2.03
30980070
19/2.14 70sq mm Grey/Brown Double insulated
6181B70 19/2.14
30980071
19/2.14 70sq mm Grey/Blue Double insulated
6181B70 19/2.14
30980068
19/1.53 35sq mm Grey/Brown Double insulated
6181B35 19/1.53
30980069
19/1.53 35sq mm Grey/Blue Double insulated
6181B35 19/1.53
30980066
19/1.35 25sq mm Grey/Brown Double insulated
6181B25 19/1.35
30980067
19/1.35 25sq mm Grey/Blue Double insulated
6181B25 19/1.35
30027338
19/1.35 25sq mm Brown/Brown Double insulated
6181B25 19/1.35
30027339
19/1.35 25sq mm Blue/Blue Double Insulated
6181B25 19/1.35
30980064
7/1.70 16sq mm Grey/Brown Double Insulated
6181B16 7/1.70
30980065
7/1.70 16sq mm Grey/Blue Double Insulated
6181B16 7/1.70
30027482
7/1.70 16sq mm Brown/Brown Double Insulated
6181B16 7/1.70
30027481
7/1.70 16sq mm Blue/Blue Double Insulated
6181B16 7/1.70
30980062
7/1.35 10sq mm Grey/Brown Double Insulated
6181B10 7/1.35
30980063
7/1.35 10sq mm Grey/Blue Double Insulated
6181B10 7/1.35
30027479
7/1.35 10sq mm Brown/Brown Double Insulated
6181B10 7/1.35
30027480
7/1.35 10sq mm Blue/Blue Double Insulated
6181B10 7/1.35
30980074
© SP Power Systems Limited
Page 12 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
7/1.04 6.0sq mm Grey/Brown Double Insulated
6181B6 7/1.04
7/1.04 6.0sq mm Grey/Blue Double Insulated
6181B6 7/1.04
30027477
7/1.04 6.0sq mm Brown/Brown Double Insulated
6181B6 7/1.04
30027478
7/1.04 6.0sq mm Blue/Blue Double Insulated
6181B6 7/1.04
30027475
7/0.67 2.5sq mm Brown/Brown Double Insulated
6181B2/5 7/0.67
30027476
7/0.67 2.5sq mm Blue/Blue Double Insulated
6181B2/5 7/0.67
9
APPROVED DUCTS, WARNING TAPES AND TILES
9.1
9.1.1
Plastic Ducts & Accessories for Underground Cable
The following list of Approved plastic ducts and associated accessories are all manufactured and supplied by Emtelle
.
SAP Number
Emtelle
Product Code
Scottish Power Description
Resistance To
Deformation
Length
30980890
5846
32mm ID ducting suitable for trenchless installation (38mm OD) Red HDPE
Class 2
100m Coils
30980879
5847
50mm ID ducting suitable for trenchless installation (58mm OD) Red HDPE
Class 2
50m Coils
30980878
TBA
50mm ID ducting suitable for trenchless installation (58mm OD) Red HDPE
Class 2
100m Coils
30980891
9676
74mm ID ducting suitable for trenchless installation(90mm OD SDR 11) Red
Class 1
100m Coils
30980904
9676S
74mm ID ducting suitable for trenchless installation(90mm OD SDR 11) Red
Class 1
50m coils
© SP Power Systems Limited
Page 13 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
30980895
9667 (9677)
90mm ID ducting suitable for trenchless installation (110mm OD SDR 11) Red
Class 1
100m Coils
30980905
9667S
90mm ID ducting suitable for trenchless installation (110mm OD SDR 11) Red
Class 1
50m Coils
30980894
9678
110mm ID ducting suitable for trenchless installation (125mm OD SDR 11) Red
Class 1
100m coils
30980906
9678S
110mm ID ducting suitable for trenchless installation (125mm OD SDR 11) Red
Class 1
50m Coils
30980893
9679
125mm ID ducting suitable for trenchless installation (160mm OD SDR 11) Red
Class 1
100m coils
30980907
9679S
125mm ID ducting suitable for trenchless installation (160mm OD SDR 11) Red
Class 1
50m Coils
30980903
9680
180mm ID ducting suitable for trenchless installation (200mm OD SDR 11) Red
Class 1
100m coils
30980909
9680S
180mm ID ducting suitable for trenchless installation (200mm OD SDR 11) Red
Class 1
50m Coils
30980892
9681
147mm ID ducting suitable for trenchless installation (180mm OD SDR 11) Red
Class 1
100m coils
30980908
9681S
147mm ID ducting suitable for trenchless installation (180mm OD SDR 11) Red
Class 1
50m coils
30982914
9494
PVC CABLE GUARD 3M X 25MM
N/A
3m
Resistance To
Deformation
Length
SAP Number
Emtelle
Product Code
Scottish Power Description
30982915
9495
PVC CABLE GUARD 3M X 55MM
N/A
3m
30982916
9496
PVC CABLE GUARD 3M X 80MM
N/A
3m
30982913
TBA
PVC CABLE GUARD 3M X 40MM
N/A
3m
30980884
20046
100mm ID straight duct, single socket end (110mm OD uPVC Duct) Red
Class 1
3m effective length
30025594
5302
100mm ID straight duct, single socket end (110mm OD uPVC Duct) Red
Class 1
6m effective length
30980888
20047
100mm ID straight duct, single socket end (110mm OD uPVC Duct) Red
Class 2
3m effective length
30980885
5303S
150mm ID straight duct, single socket end (160mm OD uPVC Duct) Red
Class 1
3m effective length
30025593
5303
150mm ID straight duct, single socket end (160mm OD uPVC Duct) Red
Class 1
6.6m effective length
30980889
20048
150mm ID straight duct, single socket end (160mm OD uPVC Duct) Red
Class 2
3m effective length
30980883
5077
House service hockeystick c/w intregral socket to suit 32mm duct (38mm OD) Red
Class 2
N/A
30980886
5236
Duct Couplers as required. PVC cable duct coupler 100mm ID straight duct Red
N/A
N/A
30980887
5235
Duct Couplers as required. PVC cable duct coupler 150mm ID straight duct Red
N/A
N/A
© SP Power Systems Limited
Page 14 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
30980882
5581
Duct Couplers as required. PVC cable duct – 32mm Red
N/A
N/A
30980896
20049
100mm ID x 11.25 Degree bend 1200 radius Red
Class 1
N/A
30980897
20050
100mm ID x 22.5 Degree bend 1200 radius Red
Class 1
N/A
30980900
20051
100mm ID x 45 Degree bend 1200 radius Red
Class 1
N/A
30980367
20052
100mm ID 90 x Degree bend 1200 radius Red
Class 1
N/A
30980899
5452U
150mm ID x 11.25 Degree bend 1200 radius Red
Class 1
N/A
30980898
5453U
150mm ID x 22.5 Degree bend 1200 radius Red
Class 1
N/A
30980901
5454U
150mm ID x 45 Degree bend 1200 radius Red
Class 1
N/A
30980902
5455U
150mm ID x 90 Degree bend 1200 radius Red
Class 1
N/A
Resistance To
Deformation
Length
Class 1
N/A
SAP Number
Emtelle
Product Code
Scottish Power Description
30980880
9710 (5862)
Bend 90 Deg PVC Duct 50mm 250mm radius (3 phase service cables only)
30025765
TBA
100mm ID x 90 Degree bend 450mm radius (For building entry only)
N/A
N/A
30025766
TBA
150mm ID x 90 Degree bend 560mm radius(For building entry only)
N/A
N/A
30025566
4156
Green Opticom 110mm OD straight duct, 4 pre-installed sub ducts
N/A
6.6m effective length
30025570
2147
Opticom Green 110mm duct + 4 fibre sub ducts 11.25 deg bend
Class 1
N/A
30025569
2145
Opticom Green 110mm duct + 4 fibre sub ducts 22.5 deg bend
Class 1
N/A
30025568
3340
Opticom Green 110mm duct + 4 fibre sub ducts flexible bend
Class 1
N/A
2469900
2609
Rope blowing gun for Opticom
N/A
N/A
TBA
3218
TYPE B TERMINATOR
N/A
N/A
TBA
3613
OPTICOM REPAIR KIT
N/A
N/A
30025566
5730
Opticom Green 110mm duct + 4 fibre sub ducts x 6.6m SP Manweb printing
Class 1
6.6m, MoQ 524m
30025565
5715
110mm Duct, No subduct
Class 1
6m MoQ 540
TBA
3818
GREEN 110MM 11.25 DEG BEND
Class 1
N/A
TBA
3817
GREEN 110MM 22.5 DEG BEND
Class 1
N/A
© SP Power Systems Limited
Page 15 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
TBA
3839
GREEN 110MM 45 DEG BEND
Class 1
N/A
TBA
3840
GREEN 110MM 90 DEG BEND
Class 1
N/A
30025567
3823
Opticom Green 110mm duct + 4 fibre sub ducts Coupling
Class 1
N/A
TBA
5505
RED 110MM X 11.25 DEG 3.9M RAD BEND C1
Class 1
N/A
TBA
5506
RED 110MM X 22.5 DEG 1.75M RAD BEND C1
Class 1
N/A
TBA
5482R
RED 160MM X 11.25 DEG 3.9M RAD BEND C1
Class 1
N/A
TBA
5479R
RED 160MM X 22.5 DEG 3.9M RAD BEND C1
Class 1
N/A
Resistance To
Deformation
Length
SAP Number
9.2
Emtelle
Product Code
Scottish Power Description
TBA
5640
RED 160MM X 6M RINGSEAL SP 132KV C1
Class 1
N/A
TBA
5420R
RED 160MM X 22.5 DEG 3.9M RAD BEND RING SEAL C1
Class 1
N/A
TBA
5453U
RED 160MM X 11.25 DEG 3.9M RAD BEND RING SEAL C1
Class 1
N/A
TBA
5339
BLK 160MM CONNECTOR DOUBLE
Class 1
N/A
TBA
5645
RED 160MM X 6M RINGSEAL SP 275KV C1
Class 1
N/A
TBA
20132
RED 200MM X 6M RINGSEAL 275KV SP C1
Class 1
N/A
TBA
20111
RED 200MM X 22.5 DEG 3.9M RAD RINGSEAL BEND C1
Class 1
N/A
TBA
20110
RED 200MM X 11.25 DEG 3.9M RAD RINGSEAL BEND C1
Class 1
N/A
TBA
5505
RED 110MM X 11.25 DEG 3.9M RAD BEND C1
Class 1
N/A
Duct Sealing Systems
Duct sealing systems will be installed in accordance with the manufacturers installation instructions
System Description
© SP Power Systems Limited
Approved Manufacturer
Page 16 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
CSD Rise duct sealing system
CSD Sealing Systems
Rayflate duct sealing system
TE Connectivity
9.3
Warning tapes and tiles
SAP Number
30980838
30980837
30980214
Type
LV Warning tape
11kV Protection Tape
33kV protection Tiles
© SP Power Systems Limited
Voltage
LV
11kV
33kV
Remarks
0.1mm thick, 365m rolls inc. SPEN logo
2.5mm thick, 40m rolls inc. SPEN logo
1000mm x 244mm x 12mm inc. SPEN logo
Page 17 of 54
Approved Manufacturer
Boddingtons
Centriforce
10
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
APPROVED JOINTS & TERMINATIONS
10.1 33kV Joints
10.1.1 33kV Straight & Branch joints for XLPE 1-core cables
SAP
Number
30980260
30980261 +
30025661
Description
2
Straight joint for 1-core XLPE 150mm 2
2
2
150mm or 150mm -240mm or
2
2
240mm - 240mm Cu or Alu cables
2
Straight joint for 1-core XLPE 400mm Alu
2
SP
Reference
33-001
Manufacturer Part
Number
CSJT-36D/1XU-1XUGB03
33-004
CSJT-36E/1XU-1XUGB02
30980261 +
30028755
Straight joint for 1-core XLPE 500mm 2
2
2
2
500mm or 500mm -630mm or 630mm 2
630mm Cu
33-004
CSJT-36E/1XU-1XUGB02
30025658
Branch joint for 1-core XLPE 150mm²
33-020
SMOE-64212
Additional Information
Approved
Manufacturer
Joint kit includes connector
Joint kit supplied without connector.
BSMB185-400 connector required
(30025661).
Joint kit supplied without connector.
BSMB630 Mk2 connector required
(30028755). This connector is range
2
taking from 500 to 630mm
Includes connector
TE Connectivity
10.1.2 33kV Transition Straight Joints for XLPE to PILC Cables
SAP
Number
30980257
30025657
N/A
Description
2
2
1-core XLPE 150mm -240mm to 1-core
PILC 0.3 sq inch Cu
2
1-core XLPE 500mm-630mm to 1-core
PILC 0.75-1.0 sq inch Cu
2
1-core XLPE 500mm-630mm to 1-core
PILC 1.5sq inch Cu (Standard or Milliken
conductor)
© SP Power Systems Limited
SP
Reference
33-007
33-009
N/A
Manufacturer Part
Number
CATJ-36D/1XU-1HLGB01
CATJ-36F/1XU-1HLGB01
SMOE 64222
Page 18 of 54
Additional Information
Approved
Manufacturer
Includes connector
Without connector. See section 10.3 for
full range of connectors for this kit
Without connector. See section 10.3 for
full range of connectors for this kit
TE Connectivity
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
2
30980258 +
30025688
3 x 1-core XLPE 150mm to 3-core PILC
0.1 sq inch Cu H type trifurcating joint
30980258
3 x 1-core XLPE 150mm -240mm to 3core PILC 0.3 sq inch Cu H type
trifurcating joint
2
2
3 x 1-core XLPE 150mm -240mm to 3core PILC 0.4-0.5 sq inch Cu H type
trifurcating joint
2
2
3 x 1-core XLPE 150mm -240mm to 3core PILC 0.3 sq inch Cu HSL trifurcating
joint
30980258 +
30025689
30980259
2
2
33-014
CATJ-36D/1XU3SB-GB02
33-014
CATJ-36D/1XU3SB-GB02
33-014
CATJ-36D/1XU3SB-GB02
33-017
CATJ-36D/1XU-3HLGB01
Use kit SMOE-64171 (30025688)
Contains smaller tubes and connectors
for small PILC cable
Includes connectors
Use kit SMOE64282 (30025689).
Contains larger tubes and connectors
for large PILC cable.
Includes connectors
10.1.3 33kV Pot End Module Kits
SAP Number
Description
SP Reference
3 x 30980260
1 x 30025691
1-core XLPE 150240mm²
33-022/33-023
Use in
Conjunction
with
33-001
3 x 30980261
1 x 30025692
3 x 30025661
3 x 30980261
1 x 30025692
3 x 30025685
3 x 30980261
1 x 30025692
3 x 30025687
3 x 30980257
1 x 30025691
1-core XLPE 400mm²
N/A
33-004
CSJ-EndSeal-Kit-EGB01
1-core XLPE 500mm²
33-024
33-004
CSJ-EndSeal-Kit-EGB01
As above + larger connector.
1-core XLPE 630mm²
33-025
33-004
CSJ-EndSeal-Kit-EGB01
As above + larger connector
1-core PILC 0.3 sq
inch Cu
33-026
33-007
CSJ-EndSeal-Kit-CGB02
As above (connector included in kit)
© SP Power Systems Limited
Manufacturer Part
Number
CSJ-EndSeal-Kit-CGB02
Page 19 of 54
Additional Information
SAP Numbers quoted per circuit – set
of 3. 1-core Pot ends are made off by
using an appropriately sized straight
joint kit plus a set of polymeric rods from
an End Seal kit.
As above + larger connector
Approved
Manufacturer
TE Connectivity
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
3 x 30025657
1 x 30025692
3 x 30025685
3 x 30025657
1 x 30025692
3 x 30025690
1 x 30980258
1 x 30025688
1 x 30025691
1-core PILC 0.75 sq
inch Cu
33-027
33-009
CSJ-EndSeal-Kit-EGB01
As above + larger connector
1-core PILC 1.0 sq
inch Cu
33-028
33-010
CSJ-EndSeal-Kit-EGB01
As above + larger connector
3-core PILC 0.1 sq
inch Cu H type
N/A
33-014
CATJ-36D/1XU-3SBGB02 + SMOE64171 + CSJEndSeal-Kit-C-GB02
3-core PILC pot ends made off using an
appropriately sized trif joint kit + a set of
poly rods from an End Seal kit. SMOE64171 kit is for small PILC cables
1 x 30980258
1 x 30025691
3-core PILC 0.3 sq
inch Cu H type
N/A
33-014
Connectors included
1 x 30980258
3 x 30025689
1 x 30025693
3-core PILC 0.4/0.5 sq
inch H type
N/A
33-014
1 x 30980259
1 x 30025691
3-core PILC 0.3 sq
inch Cu HSL
N/A
33.017
CATJ-36D/1XU-3SBGB02 + CSJEndSeal-Kit-C-GB02
CATJ-36D/1XU-3SBGB02 +
BAH-022100035 +
CSJ-EndSeal-Kit-DGB01
CATJ-36D/1XU-3HLGB01 + CSJEndSeal-Kit-C-GB02
As above + larger connector
Connectors included
10.2 33kV Terminations
10.2.1 33kV Indoor Terminations for 1-core XLPE cables
SAP
Number
30980216
30025698 +
30032526
30025698 +
Description
SP Reference
1 Core XLPE 150-240mm² Cu or Alu
Coldshrink Termination (pack of 3)
1-Core XLPE 400 mm² Alu Coldshrink
Termination (pack of 3)
1-Core XLPE 500-630mm² Cu
33-029,33-030
Manufacturer
Part Number
MV33TE1/SP
33-031
MV33TE2/SP
33-032
MV33TE2/SP
© SP Power Systems Limited
Page 20 of 54
Additional Information
Approved
Manufacturer
Includes mechanical shear off lugs for
phases and earths
Without lugs. See section 10.3 for full
range of lugs for this kit
Without lugs. See section 10.3 for full
SICAME
30032528
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
Coldshrink Termination (pack of 3)
range of lugs for this kit
10.2.2 33kV Outdoor Terminations for XLPE 1-core cables
SAP Number
Description
SP Reference
30980215
1 Core XLPE 150-240mm² Cu or Alu
Coldshrink Termination (pack of 3)
1-Core XLPE 400 mm² Alu Coldshrink
Termination (pack of 3)
1-Core XLPE 500-630mm² Cu
Coldshrink Termination (pack of 3)
33-033,33-034
Manufacturer
Part Number
MV33TE3/SP
33-035
MV33TE4/SP
33-036
MV33TE4/SP
30980250 +
30032527
30980250 +
30032529
Additional Information
Approved
Manufacturer
Includes mechanical shear off lugs for
phases & earths
Without lugs. See section 10.3 for full
range of lugs for this kit
Without lugs. See section 10.3 for full
range of lugs for this kit
SICAME
10.2.3 33kV "Inner cone" Connectors for XLPE 1-core cables
Description
2
1-core XLPE 150mm Cu or Alu
2
1-core XLPE 150mm Cu or Alu
2
1-core XLPE 240mm Cu or Alu
2
1-core XLPE 400mm Alu
2
1-core XLPE 500mm Cu
2
1-core XLPE 630mm Cu
SP Reference
Plug Size
33-037
33-038
33-039
N/A
33-040
33-041
Size 2
Size 3
Size 3
Size 3
Size 3
Size 3
Manufacturer Part
Number
870 230 150
870 330 150
870 330 240
870 330 400
870 330 500
870 330 630
Lead Time
Additional Information
4-6 weeks
4-6 weeks
4-6 weeks
4-6 weeks
4-6 weeks
4-6 weeks
Set of 3 plugs per pack
Set of 3 plugs per pack
Set of 3 plugs per pack
Set of 3 plugs per pack
Set of 3 plugs per pack
Set of 3 plugs per pack
Approved
Manufacturer
Pfisterer
10.2.4 33kV Transformer Separable Tee connectors and couplers for XLPE 1-core cables
SAP Number
Description
30980233
1-core XLPE 150mm Cu or Alu
30027175
SP reference
Manufacturer Part Number
Additional Information
2
33-042
3XM400TB/G-150.240-45/SP
Three connectors per pack
2
33-043
3XM400TB/G-120.300-45/SP
Three connectors per pack
2
N/A
3XM440TB/G-400-45/SP
Three connectors per pack
2
33-044
33-045
3XM440TB/G-500-45/SP
3XM440TB/G-630-45/SP
Three connectors per pack
Three connectors per pack
1-core XLPE 240mm Cu or Alu
30026496
1-core XLPE 400mm Alu
30025695
30025696
1-core XLPE 500mm Cu
2
1-core XLPE 630mm Cu
© SP Power Systems Limited
Page 21 of 54
Approved
Manufacturer
Nexans/Euromold
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
SAP Number
Description
SP reference
Manufacturer Part Number
Additional Information
30030579
Coupler for M400TB Tee
connectors
Coupler for M440TB Tee
connectors
N/A
(M) 400CP-SC
One coupler per pack
N/A
(M) 440CP + 676SA
One coupler per pack
30030580
Approved
Manufacturer
Nexans/Euromold
10.2.5 33kV Guroflex terminations
SAP
Number
Description
SP
Reference
Manufacturer Part
Number
Additional Information
30029368
33kV 150-240mm² Termination Kit for
1C Cables
N/A
SMOE-63976
Contains gland sealing kit (3
terminations per pack)
30030424
33kV 500/630mm² Termination Kit for
1C Cables
N/A
SMOE-64302
Contains gland sealing kit (1 termination
per pack)
Approved
Manufacturer
TE Connectivity
10.3 33kV Supplementary & Connector Modules
SAP
Number
30025661
30028755
30025690
Not held in
stock
Description
SP Reference
Shear-off connector for 1-core XLPE
2
2
400mm to 1-core XLPE 400mm
Shear off connector for 1-core XLPE
2
500-630mm to 1-core XLPE 5002
630mm
Shear off connector for 1-core XLPE
2
500-630mm Cu to 1-core PILC 0.751.0 sq inch Cu
Shear off connector for 1-core XLPE
2
500mm to 1-core PILC 1.5sq inch
N/A
Use in
Conjunction
with
33-004
N/A
33-004
BSMB-630 Mk2
N/A
33-009
BAH-022110055
N/A
SMOE 64222
joint kit
EPPA-06327/41-42/55-
© SP Power Systems Limited
Manufacturer
Part Number
Additional Information
Approved
Manufacturer
BSMB185-400
Range taking connector from
2
500-630mm
TE Connectivity
Page 22 of 54
Available from manufacturer
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
Not held in
stock
Shear off connector for 1-core XLPE
2
630mm to 1-core PILC 1.5sq inch
N/A
SMOE 64222
joint kit
Not held in
stock
Shear off connector for 1-core XLPE
2
500mm to 1-core PILC 1.5sq inch
(Milliken conductor)
Shear off connector for 1-core XLPE
2
630mm to 1-core PILC 1.5sq inch
(Milliken conductor)
Connectors and tubes for 3-core PILC
0.1 sq inch Cu H type to 3 x 1-core
2
2
XLPE 150mm -240mm
Connector and tubes for 3-core PILC
0.4/0.5 sq inch Cu H type to 3 x 1-core
2
2
XLPE 150mm -240mm
2
Shear off lug for 1-core XLPE 400mm
(pack of 3)
2
Shear off lug for 1-core XLPE 400mm
(pack of 3)
N/A
SMOE 64222
joint kit
N/A
SMOE 64222
joint kit
N/A
33-014
180A
EPPA-06331/45-42/55180A
EPPA-06327/41-43/56180A
EPPA-06331/45-43/56180A
SMOE-64171
N/A
33-014
SMOE-64282
N/A
33-031
HVTM33/4-12
N/A
33-035
HVTM33/4-2H
N/A
33-032
HVTM33/3-12T
N/A
33-036
HVTM33/3-2HT
SP
Reference
11-001
Manufacturer Part
Number
CSJT-12B/1XU-1XU-GB01
11-002
CSJT-12C/1XU-1XU-GB01
Not held in
stock
30025688
30025689
30032526
30032527
30032528
30032529
Shear off lug for 1-core XLPE 5002
630mm (pack of 3)
Shear off lug for 1-core XLPE 5002
630mm (pack of 3)
Available from manufacturer
Available from manufacturer
Available from manufacturer
Contains smaller tubes and
shear off connectors to suit
0.1sq inch PILC cable
Contains larger tubes and
shear off connector to suit
0.4/0.5 sq inch PILC cable
M12 holed centre- palmed
lug
M12 hole and slot centrepalmed lug for OH
connections
M12 holed centre- palmed
lug
M12 hole and slot centrepalmed lug for OH
connections
Sicame
Sicame
10.4 11kV Joints
10.4.1 11kV Straight Joints for XLPE cables
SAP
Number
30980299
30980300
Description
2
1-core XLPE 95/185mm SAC to 1-core XLPE
2
95/300mm SAC
2
2
1-core XLPE 300mm SAC to 1-core XLPE 300mm
© SP Power Systems Limited
Additional Information
Approved
Manufacturer
Connector included
TE Connectivity
Page 23 of 54
Connector included
30980303
30980304
30980270
30980270 +
30028640
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
SAC
2
2
1-core XLPE 300mm Cu to 1-core XLPE 300mm Cu
2
2
1-core XLPE 500mm Cu to1-core XLPE 500mm Cu
2
3-core XLPE 95-185mm SAC to 3-core XLPE 952
300mm SAC
2
3-core XLPE 95-300mm SAC to 3-core XLPE 952
300mm SAC
11-003
11-004
11-005
CSJT-12C/1XU-1XU-GB03
CSJT-12E/1XU-1XU-GB01
CSJT-12B/3XU-3XU-GB01
Connector included
Connector included
Connectors included
11-005
CSJT-12B/3XU-3XU-GB01
When jointing 300300mm use connector
module BAH-032100057
(30028640)
10.4.2 11kV Transition Straight Joints for XLPE to PILC/PICAS cables
SAP Number
Description
30980336
1-core XLPE 300mm Cu to 1-core PILC
2
300mm Cu
2
1-core XLPE 500mm Cu to 1-core PILC
2
500mm Cu
2
3-core XLPE 95/300mm SAC to 3-core
2
PILC up to 70mm
30980337
30980295
30980278
30980281
2
2
3-core XLPE 95/300mm SAC to 3-core
2
PILC/PICAS greater than 70mm up to
2
185mm
2
3-core XLPE 95/300mm SAC to 3-core
2
PILC/PICAS greater than 185mm up to
2
300mm
© SP Power Systems Limited
SP
Refere
nce
11-007
Manufacturer Part
Number
Additional Information
Approved
Manufacturer
CATJ-12C/1XU-1HL-GB01
Connector included
TE Connectivity
11-008
CATJ-12E/1XU-1HL-GB01
Connector included
11-009
CATJ-12B/3XU-3SB-GB02
11-010
CATJ-12B/3XU-3SB-GB01
Connectors included. Also requires
build up kit and earth kit for PILC
cable.
Connectors included. Also requires
earth kit for PILC / PICAS cable.
11-011
CATJ-12C/3XU-3SB-GB01
Page 24 of 54
Connectors included. Also requires
earth kit for PILC / PICAS cable and
2
build up kit for 95mm XLPE cable.
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
10.4.3 11kV Trifurcating Straight Joints for XLPE cables
SAP Number
Description
30980276
3 x 1-core XLPE 95/185mm SAC to 3-core
2
95/300mm XLPE SAC
2
2
3 x 1-core XLPE 300mm SAC to 3-core 95/300mm
XLPE SAC
30980277
2
SP
Reference
11-013
Manufacturer Part
Number
CSJT-12B/1XU-3XU-GB01
11-014
CSJT-12C/1XU-3XU-GB01
Additional Information
Approved
Manufacturer
Connectors included
Connectors included.
Also requires build up kit
2
for 95mm 3c XLPE
cable
TE Connectivity
10.4.4 11kV Transition Trifurcating Straight Joints for XLPE to PILC/PICAS cables
SAP
Number
30980296
SP
Reference
11-015
Manufacturer Part
Number
CATJ-12B/1XU-3SB-GB01
2
11-016
CATJ-12B/1XU-3SB-GB03
Connectors included. Also requires earth kit
for PILC / PICAS cable.
2
11-017
CATJ-12C/1XU-3SB-GB03
Connectors included. Also requires earth kit
for PILC / PICAS cable and build up kit for
2
95mm XLPE cable.
11-018
SMOE-64147
Use in conjunction with an appropriate
transition branch joint. Also requires earth kit
for PILC cable and 2 x build up kits for 6core 0.1sq inch PILC cable.
Description
2
3 x 1-core XLPE 95/185mm SAC to 32
core PILC up to 70mm
30980297
3 x 1-core XLPE 95/185mm SAC - 32
core PILC/PICAS greater than 70mm
2
up to 185mm
30980298
3 x 1-core XLPE 95/300mm SAC - 32
core PILC/PICAS greater than 185mm
2
up to 300mm
30980324
3 x 1-core or 3-core XLPE 95/300mm
SAC- 6-core PILC 0.1-0.2 sq inch
2
Additional Information
Approved
Manufacturer
Connectors included. Also requires build up
kit and earth kit for PILC cable.
TE Connectivity
10.4.5 11kV Pot End Module Kits
SAP
Number
30025691
Description
2
1-core XLPE 95-300mm SAC / 3-core XLPE
© SP Power Systems Limited
SP
Reference
Use in Conjunction
with
Manufacturer
Part Number
Additional Information
11-019
11-001, 11-002, 11-
CSJ-EndSeal-
1-core and 3-core Pot
Page 25 of 54
Approved
Manufacturer
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
95-300mm2 SAC / 3-core PILC/PICAS up to
185mm2
30025693
2
3-core PILC/PICAS greater than 185mm up
2
to 300mm
003, 11-004, 11-005,
11-009, 11-010
Kit-C-GB02
11-025
11-011
CSJ-EndSealKit-D-GB01
SP
Reference
Use in Conjunction
with
Manufacturer
Part Number
11-026
11-030
CSJ-EndSealKit-F-GB02
ends are made off by
using an appropriately
sized straight joint kit
plus a set of polymeric
rods from End Seal kit.
As above
10.4.6 11kV Loop Joint Module Kits (XLPE-XLPE)
SAP
Number
30025660
Description
2
3-core XLPE 95/300mm SAC- 3-core XLPE
2
95/300mm SAC
Additional Information
Approved
Manufacturer
Tyco XLPE – XLPE loop
joints are made off by
using an appropriately
sized branch joint kit
plus a set of polymeric
rods from End Seal kit.
TE Connectivity
Additional Information
Approved
Manufacturer
Connectors included.
Also requires earth kit
for PILC/PICAS cables
+ build up kits for 0.1”
PILC cables.
Connectors included.
Also requires earth kit
for PILC/PICAS cables
TE Connectivity
10.4.7 11kV Transition Loop Joint Kits (XLPE-PILC/PICAS)
SAP
Number
30980280
30980283
Description
2
3-core XLPE 95/300mm SAC- 3-core
2
PILC/PICAS up to 95mm
2
3-core XLPE 95/300mm SAC- 3-core
2
PILC/PICAS greater than 95mm up to
2
300mm
© SP Power Systems Limited
SP
Reference
Use in Conjunction
with
Manufacturer
Part Number
11-027
NA
SMOE 64149
11-028
NA
Page 26 of 54
SMOE 64150
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
10.4.8 11kV Branch Joints (XLPE-XLPE)
SAP
Number
30025659
30980273
Description
2
1-core XLPE 95/300mm SAC- 1-core XLPE
2
95/300mm SAC
2
3-core XLPE 95/300mm SAC- 3-core XLPE
2
95/300mm SAC
SP
Reference
Use in Conjunction
with
Manufacturer
Part Number
11-029
NA
CSBJ12F/1XU-2XUGB02
Connectors included.
CSBJ12F/3XU-6XUGB01
Connectors included.
11-030
NA
Additional Information
Approved
Manufacturer
TE Connectivity
TE Connectivity
10.4.9 11kV Transition Branch Joints (XLPE onto PILC/PICAS)
SAP
Number
SP
Reference
Manufacturer
Part Number
2
11-031
CATJ-12F/3XU6SB-GB02
Connectors included. Also requires earth kit for
PILC/PICAS cables + build up kits for 0.1”
PILC cables.
2
11-032
CATJ-12F/3XU6SB-GB03
Connectors included. Also requires earth kit for
PILC/PICAS cables.
2
11-033
CATJ-12F/1XU6SB-GB02
Connectors included. Also requires earth kit for
PILC/PICAS cables + build up kits for 0.1”
PILC cables.
2
11-034
CATJ-12F/1XU6SB-GB03
Connectors included. Also requires earth kit for
PILC/PICAS cables.
Description
30980279
3-core XLPE 95/300mm SAC- 3-core
2
PILC/PICAS up to 95mm
30980282
3-core XLPE 95/300mm SAC- 3-core
2
PILC/PICAS greater than 95mm up to
2
300mm
30980326
3 x 1-core XLPE 95/300mm SAC- 3-core
2
PILC/PICAS up to 95mm
30980325
3 x 1-core XLPE 95/300mm SAC- 3-core
2
PILC/PICAS greater than 95mm up to
2
300mm
© SP Power Systems Limited
Page 27 of 54
Additional Information
Approved
Manufacturer
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
10.5 11kV Supplementary & Connector Modules
SAP
Number
Description
SP
Reference
Use in Conjunction with
Manufacturer
Part Number
Additional
Information
Module contains 3
connectors
30028640
Connector module for 300-300mm
3-core xlpe straight joints
2
N/A
11-005
BAH032100057
30028641
External Earthing kit for 3-core
2
300mm straight joint for enhanced
ratings
N/A
11-005
SMOE-64237
30980196
11kV Paper to Paper conversion kit
for use with paper cables up to
2
185mm
11-052
11-009, 11-010
SMOE-64042
Converts transition
base kit into paper
to paper joint.
30980197
11kV Paper to Paper conversion kit
for use with paper cables greater
2
2
than 185mm up to 300mm
11-053
11-011
SMOE-64043
Converts transition
base kit into paper
to paper joint.
30980284
Earthing kit for 95-300mm PICAS
11-055
11-009, 11-010, 11-011, 11-015,
11-016, 11-017, 11-027, 11-028,
11-031, 11-032, 11-033, 11-034
SMOE-63893
30980291
Earthing kit for up to 50mm PILC
11-057
11-009, 11-015, 11-027, 11-031,
11-033
SMOE-64044
30980286
Earthing kit for up to greater than
2
2
50mm up to 300mm PILC
11-058
11-009, 11-010, 11-011, 11-015,
11-016, 11-017, 11-027, 11-028,
11-031, 11-032, 11-033, 11-034
SMOE-63894
30980315
Build up kit for up to 70mm PILC for
transition straight/trifurcating and
branch /loop joints
11-060
11-009, 11-015, 11-031, 11-033
CSJ-BuildUpCATJ-GB01
30980316
Build up kit for 95mm XLPE 3-core
for transition straight/trifurcating joints
11-062
11-011, 11-017
CSJ-BuildUpKit-C-GB02
2
2
2
© SP Power Systems Limited
2
Page 28 of 54
Approved
Manufacturer
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
10.6 11kV Terminations
10.6.1 Indoor Terminations
SAP
Number
Description
SP
Reference
Use in
Conjunction
with
Manufacturer Part
Number
Additional
Information
30980267
Bushing protection boots, kit of 3
11-050
N/A
SMOE 62803
For bushing with
diameter 46-70mm
30025694
Build up kit for small diameter bushings
11-051
11-050
SMOE 63992
For bushing with
diameter 31-45mm.
30980263
3 x 1-Core XLPE 95mm² SAC C/W
phase and earth lugs (M12)
11-035
NA
MVSCIT1/SP
Lugs supplied in kit
30980264
3 x 1-Core XLPE 185mm² SAC C/W
phase and earth lugs (M12)
11-036
NA
MVSCIT3/SP
Lugs supplied in kit
30980265
3 x 1-Core XLPE 300mm² SAC C/W
phase and earth lugs (M12)
11-037
NA
MVSCIT5/SP
Lugs supplied in kit
30980331
3 x 1-Core XLPE 300mm² Cu C/W
phase and earth lugs (M12)
11-038
NA
MVSCIT7/SP
Lugs supplied in kit
30980333
3 x 1-Core XLPE 500mm² Cu C/W
phase (compression) and earth lugs
(M12)
11-039
NA
MVSCIT9/SP
Lugs supplied in kit
30025699
3 x 1-Core XLPE 630mm² Cu C/W
phase (compression) and earth lugs
(M12)
11-040
NA
MVSCIT11/SP
Lugs supplied in kit
30027466
95mm Al shearbolt lug M16 palm hole
11-035
ITK95-16/SP
Pack of 3
30027467
185mm Al shearbolt lug M16 palm hole
11-036
ITK185-16/SP
Pack of 3
30027468
300mm Al shearbolt lug M16 palm hole
11-037
ITK300-16/SP
Pack of 3
30025700
300mm Cu shearbolt lug M16 palm hole
11-038
HVTM1/3-16B
Pack of 3
© SP Power Systems Limited
Page 29 of 54
Approved
Manufacturer
TE Connectivity
SICAME
SICAME
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
30025701
500mm Cu crimp lug M16 palm hole
11-039
L500C11W-42(16)
Pack of 3
30027465
630mm Cu crimp lug M16 palm hole
11-040
L630C11W-44(16)
Pack of 3
10.6.2 Separable "Elbow" & "T" Connectors
SAP
Number
30980301
30980232
30025697
30030581
N/A
Description
2
1-core XLPE 95mm SAC (BIL 95kV) 250
Amp Elbow interface “A”
2
1-core XLPE 300mm Cu (BIL 95kV) 630
Amp T connector interface “C”
2
1-core XLPE 500mm Cu (BIL 95kV) 1250
Amp T connector interface “C”
Coupler for K440TB Tee Connectors
2
1-core XLPE 95mm SAC (BIL 95kV) 250
Amp Elbow interface “A”
SP
Reference
Manufacturer Part
Number
Additional Information
11-047
3XK158LR-95-E-45/SP
Pack of 3. Kit contains all lugs
11-048
3XK400TB/G-300-45/SP
Pack of 3. Kit contains all lugs
11-049
3XK440TB/G-500-45/SP
Pack of 3. Kit contains all lugs
N/A
N/A
(K) 440CP + 676SA
FMCE-250-T3
Pack of 1.
Available from supplier
Approved
Manufacturer
Nexans/Euromold
Prysmian
10.6.3 Outdoor Terminations
SAP
Number
Description
SP
Reference
Manufacturer
Part Number
Additional Information
30980292
3 x 1-Core XLPE 95mm² SAC C/W phase
and earth lugs (M12)
11-041
MVSCTE1/SP
Lugs plus Earth Parking Bars, Dropper Brackets
and Cruciform Fixings supplied in kit
30980293
3 x 1-Core XLPE 185-300mm² SAC C/W
phase and earth lugs (M12)
11-042,11043
MVSCTE2/SP
Lugs plus Earth Parking Bars, Dropper Brackets
and Cruciform Fixings supplied in kit
30980334
3 x 1-Core XLPE 500mm² Cu C/W phase
(compression) and earth lugs (M12)
11-043A
MVSCTE3/SP
Lugs supplied in kit
30980335
3 x 1-Core XLPE 630mm² Cu C/W phase
(compression) and earth lugs (M12)
3-Core XLPE 95mm² SAC C/W phase
11-043B
MVSCTE4/SP
Lugs supplied in kit
11-044
MV3CTE1/SP
Lugs plus Earth Parking Bars, Dropper Brackets
30980288
© SP Power Systems Limited
Page 30 of 54
Approved
Manufacturer
SICAME
SICAME
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
30980289
and earth lugs (M12)
3-Core XLPE 185-300mm² SAC C/W
phase and earth lugs (M12)
30980254
11kV Pole Crucifix Assembly
11-045,11046
MV3CTE2/SP
4912KIT
and Cruciform Fixings supplied in kit
Lugs plus Earth Parking Bars, Dropper Brackets
and Cruciform Fixings supplied in kit
Complete with surge arrestor bonding plate and
earth termination bar.
10.6.4 11kV Guroflex terminations
SAP
Number
Description
SP
Reference
Manufacturer
Part Number
Additional Information
30980255
11kV 95-185mm² Termination Kit for 3C
Cables
N/A
SMOE-63531
Contains single sealing sleeve for 3-core
cables
30980256
11kV 300mm² Termination Kit for 3C
Cables
11kV single core gland sealing kit
N/A
SOME-63559
N/A
SMOE-63705
11kV Brass Mechanical Thimble
11kV Gland / Breakout Sealing Kit for
95mm² 1C Cables
N/A
N/A
BAH-022130001
SMOE-63977
Contains single sealing sleeve for 3-core
cables
For use where 3 separate glands enter the
box. Use with 30980255 and 30980256
2
For 95 or 185mm solid Alu cores
For use where a single gland enters the box.
Use with 30980255.
30029367
11kV Gland / Breakout Sealing Kit for
185-300mm² 1C Cables
N/A
SMOE-63978
For use where a single gland enters the box.
Use with 30980255 and 30980256.
30030810
11kV Breakout Sealing Kit for 95-300mm²
1C Cables
N/A
SMOE-64326
For use when the existing brass gland is still
being used. Use with 30980255 and 30980256
11kV 300mm² Copper Termination Kit for
1C Cables
N/A
30030421
11kV 500mm² Copper Termination Kit for
1C Cables
N/A
30030422
N/A
30030423
11kV 630mm² Copper Termination Kit for
1C Cables
30980238
30980239
30029366
© SP Power Systems Limited
SMOE-64317
Contains gland sealing kit (1 termination per
pack)
SMOE-64318
Contains gland sealing kit (1 termination per
pack)
SMOE-64319
Contains gland sealing kit (1 termination per
pack)
Page 31 of 54
Approved
Manufacturer
TE Connectivity
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
10.7 Approved LV Joint KITS & Components
10.7.1 LV Service Cable Straight Joints
SAP
Number
Description
30031230
Single phase CNE or SNE straight joint for plastic service cables 4-35mm²
30031231
Single phase transition straight joint for plastic to PILC service cables 4-35mm²
30031232
Three phase CNE or SNE straight joint for plastic service cables 4-35mm²
30031233
Three phase transition straight joint for plastic to PILC service cables 4-35mm²
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
1.3 litres of resin
1.0 litres of resin
2.5 litres of resin
2.0 litres of resin
3.4 litres of resin
3.0 litres of resin
3.4 litres of resin
4.0 litres of resin
HMFMCLKA001/SP
BAH-038081395
HMFMCLKA002/SP
BAH-038081396
HMFMCLKA003/SP
BAH-038081397
HMFMCLKA004/SP
BAH-038081398
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
10.7.2 LV Service Cable Stop Ends
SAP
Number
Description
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
30031234
Single or Three phase Stop End for CNE or SNE plastic or PILC service
cables 4-35mm²
0.8 litres of resin
1.0 litres of resin
HMFMCLKA005/SP
BAH-038081399
Sicame
TE Connectivity
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
3.4 litres of resin
3.0 litres of resin
5.5 litres of resin
HMFMCLKA006/SP
BAH-038081400
HMFMCLKA007/SP
Sicame
TE Connectivity
Sicame
10.7.3 LV Service Cable Cut, Test and Remake or branch joint
SAP
Number
Description
30031235
Single or Three phase Cut, Test & Remake or branch joint for CNE or
SNE plastic service cables 4-35mm²
30031236
Single or Three phase Cut, Test & Remake or branch joint for PILC
© SP Power Systems Limited
Page 32 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
service cables 4-35mm²
6.0 litres of resin
BAH-038081401
TE Connectivity
Manufacturer Part
Number
Approved
Manufacturer
HMFMCLKA008/SP
BAH-038081402
HMFMCLKA009/SP
BAH-038081403
HMFMCLKA010/SP
BAH-038081404
HMFMCLKA011/SP
BAH-038081405
HMFMCLKA012/SP
BAH-038081406
HMFMCLKA013/SP
BAH-038081407
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
12.0 litres of resin
9.5 litres of resin
13.8 litres of resin
12 litres of resin
13.8 litres of resin
HMFMCLKA014/SP
BAH-038081408
HMFMCLKA015/SP
BAH-038081409
HMFMCLKA016/SP
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
10.7.4 LV Service OH Lines terminations
SAP
Number
Description
30031237
Single phase CNE pole termination for polymeric service cables connected direct to OH line
30031238
Single phase SNE pole termination for polymeric service cables connected direct to OH line
30031239
Three phase CNE/SNE pole termination for polymeric service cables connected direct to OH line
30030055
Single phase CNE pole termination for polymeric service cables connected to pole mounted fuses
30030056
Single phase SNE pole termination for polymeric service cables connected to pole mounted fuses
30030057
Three phase CNE/SNE pole termination for polymeric service cables connected to pole mounted
fuses
10.7.5 LV Mains/Service branch joint
SAP
Number
Description
30031240
Mains / service branch joint for 3 or 4-core waveform cables up to 185mm
30031241
Mains / service branch joint for 3 or 4-core waveform cables 240-300mm
30031242
Mains / service branch joint for PILC cables 60-95mm
© SP Power Systems Limited
2
Page 33 of 54
2
2
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
2
30031243
Mains / service branch joint for PILC cables >95-185mm
30031244
Mains / service branch joint for PILC cables >185-300mm
2
8 litres of resin
13.8 litres of resin
12 litres of resin
18 litres of resin
18 litres of resin
BAH-038081410
HMFMCLKA017/SP
BAH-038081411
HMFMCLKA018/SP
BAH-038081412
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
11.1 litres of resin
9.5 litres of resin
18 litres of resin
14 litres of resin
23 litres of resin
27 litres of resin
HMFMCLKA019/SP
BAH-038081413
HMFMCLKA020/SP
BAH-038081414
HMFMCLKA021/SP
BAH-038081415
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
11.5 litres of resin
9.5 litres of resin
HMFMCLKA036/SP
BAH-038081430
Sicame
TE Connectivity
Use in Conjunction
Manufacturer Part
Approved
10.7.6 LV Mains Straight Joints
SAP
Number
Description
30031245
LV Mains Straight Joint Base Kit (95mm )
30031246
LV Mains Straight Joint Base Kit (185mm )
30031247
LV Mains Straight Joint Base Kit (300mm )
2
2
2
10.7.7 LV Transformer Single Core Cable Straight Joint
SAP
Number
Description
30031262
LV Transformer single core straight joint (480mm-740mm )
2
10.7.8 LV Mains Branch Joints
SAP
Description
© SP Power Systems Limited
Page 34 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
Number
2
30031248
LV Waveform Mains Branch Joint Base Kit (95mm )
30031249
LV Waveform Mains Branch Joint Base Kit (185mm )
30031250
LV Waveform Mains Branch Joint Base Kit (240/300mm )
30031251
30031252
30031253
2
2
LV 3 or 4-core Waveform to PILC Mains Transition Branch Joint Kit
2
(95mm )
LV 3 or 4-core Waveform to PILC Mains Transition Branch Joint Kit
2
(185mm )
LV 3 or 4-core Waveform to PILC Mains Transition Branch Joint Kit
2
(240/300mm )
with
Number
Manufacturer
9.2 litres of resin
8 litres of resin
24 litres of resin
14 litres of resin
29 litres of resin
20 litres of resin
16.7 litres of resin
12 litres of resin
22.8 litres of resin
20 litres of resin
34 litres of resin
31 litres of resin
HMFMCLKA022/SP
BAH-038081416
HMFMCLKA023/SP
BAH-038081417
HMFMCLKA024/SP
BAH-038081418
HMFMCLKA025/SP
BAH-038081419
HMFMCLKA026/SP
BAH-038081420
HMFMCLKA027/SP
BAH-038081421
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
20.2 litres of resin
8 litres of resin
34 litres of resin
31 litres of resin
HMFMCLKA028/SP
BAH-038081422
HMFMCLKA029/SP
BAH-038081423
Sicame
TE Connectivity
Sicame
TE Connectivity
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
10.7.9 LV Mains Loop Joints
SAP
Number
Description
2
30031254
30031255
LV Loop Joint all cables up to 95mm (Waveform and/or PILC)
2
LV Loop Joint only Waveform cables up to 95mm (No PILC cables)
2
LV Loop Joint all cables > 95mm (Waveform and/or PILC)
2
LV Loop Joint all PILC cables or Waveform cables > 95mm
10.7.10 LV Mains Three Loose End Joints
SAP
Number
Description
© SP Power Systems Limited
Page 35 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
2
30031256
LV Three Loose End Joint all cables (60-185mm )
30031257
LV Three Loose End Joint all cables (>185-300mm )
2
31.8 litres of resin
23 litres of resin
60 litres of resin
50 litres of resin
HMFMCLKA030/SP
BAH-038081424
HMFMCLKA031/SP
BAH-038081425
Sicame
TE Connectivity
Sicame
TE Connectivity
Use in Conjunction
with
Manufacturer Part
Number
Approved
Manufacturer
3.6 litres of resin
4 litres of resin
7 litres of resin
8 litres of resin
7 litres of resin
4 litres of resin
9 litres of resin
8 litres of resin
HMFMCLKA032/SP
BAH-038081426
HMFMCLKA033/SP
BAH-038081427
HMFMCLKA034/SP
BAH-038081428
HMFMCLKA035/SP
BAH-038081429
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Manufacturer Part
Number
Approved
Manufacturer
HMFMCLKA037/SP
BAH-038081431
HMFMCLKA038/SP
BAH-038081432
HMFMCLKA039/SP
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
10.7.11 LV Mains Stop End Joints
SAP
Number
Description
30031258
LV 3 or 4-core Waveform Mains Stop End Joint (70-95mm )
30031259
LV 3 or 4-core Waveform Mains Stop End Joint (185-300mm )
30031260
LV Mains Stop End Joint PILC (60-95mm )
30031261
LV Mains Stop End Joint PILC (>95-300mm )
2
2
2
2
10.7.12 LV Mains OH Lines Terminations
SAP
Number
Description
30031263
LV 3 or 4-core Waveform Termination Direct to OH Line (70-95mm )
30031264
LV 3 or 4-core Waveform Termination Direct to OH Line (185mm )
30031265
LV 3 or 4-core Waveform Termination to Pole Mounted Fuses (70-95mm )
2
2
© SP Power Systems Limited
2
Page 36 of 54
30031266
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
2
LV 3 or 4-core Waveform Termination to Pole Mounted Fuses (185mm )
BAH-038081433
HMFMCLKA040/SP
BAH-038081434
TE Connectivity
Sicame
TE Connectivity
Manufacturer Part
Number
Approved
Manufacturer
HMFMCLKA041/SP
BAH-038081435
HMFMCLKA042/SP
BAH-038081436
HMFMCLKA043/SP
BAH-038081437
HMFMCLKA044/SP
BAH-038081438
HMFMCLKA045/SP
BAH-038081439
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
10.7.13 LV Mains Re-Enterable Joints
SAP
Number
Description
2
30031199
30031200
30031201
30031202
30031203
Temporary LV Mains Stop End (60-300mm all cable types) or Open & Test/Cut & Test and Strap2
Over joint kit (Up to 95mm 3 or 4-core Waveform)
2
Temporary LV Mains Open & Test/Cut & Test and Strap-Over joint kit (Up to 95mm PILC or
CONSAC)
2
Temporary LV Mains Open & Test/Cut & Test and Strap-Over joint kit (> 95-185mm PILC or
CONSAC)
2
Temporary LV Mains Open & Test/Cut & Test and Strap-Over joint kit (> 185-300mm PILC or
CONSAC)
2
Temporary LV Mains Open & Test/Cut & Test and Strap-Over joint kit (185-300mm 3 or 4-core
Waveform)
10.8 LV Supplementary & Connector Modules
© SP Power Systems Limited
Page 37 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
SAP
Number
Description
30031204
Armour Bond Module for PILC service cable Stop Ends. Use in conjunction with 30031234
30031275
30031276
30031277
30031278
30031279
30031280
30031281
30031282
30031283
Branch Connector Module for service cables. Fully insulated brass service branch connector for
taking small service cable branch off a service cable. Use in conjunction with 30031235 and
30031236
Phase connector remake module for service cables. Fully insulated brass service phase connector
for remaking a cut phase core on a service cable. Use in conjunction with 30031235 and
30031236
XL Brass tunnel connector module for old PILC concentric cables. Extended brass tunnel
connector (Uninsulated) for cutting and remaking old PILC concentric service stranded copper
neutral wires. Use in conjunction with 30031236
2
Insulated insulating piercing mains/service branch connector module (up to 185mm ). Fully
2
Insulated connector for taking additional service phase connections from 60-185mm Mains or
2
neutral connections from 4-core 95-185mm Waveform Mains cables. Use in conjunction with
30031240, 30031242 & 30031243
2
Insulated insulating piercing mains/service branch connector module (240-300mm ). Fully
2
Insulated connector for taking additional service phase connections from >185-300mm Mains or
2
neutral connections from 4-core 240-300mm Waveform Mains cables. Use in conjunction with
30031241 & 30031244
Brass neutral earth connector module. Use in conjunction with 30031240 & 30031241 for
additional service neutral/earth connections in Mains/Service joints. Use with 30031258 and
30031259 for 3-core waveform neutral/earth connection and 30031260 and 30031261 for
Concentric Mains Stop Ends.
CONSAC neutral earth connector module. Brass connector that connects to the Aluminium sheath
of a Consac cable which allows the neutral/earth wires of a 3-core waveform cable to connect
when making off a straight joint. Also used for the earth connection in a Consac Stop End. Use in
conjunction with 30031245, 30031246, 30031247, 30031258 & 30031259 for CONSAC straight
joints and Stop Ends
2
95mm channel type straight connector. Fully insulated phase/neutral connector. Use in
conjunction with 30031245 for 4-core to 4-core waveform or 4-core waveform to PILC
2
95mm extended channel type straight connector. Fully insulated phase/neutral connector (50mm
longer). Used in conjunction with 30031199 & 30031200 for temporary joints.
© SP Power Systems Limited
Page 38 of 54
Manufacturer Part
Number
HMFMCLKA046/SP
BAH-035440025
Approved
Manufacturer
Sicame
TE Connectivity
HMFMCLKA047/SP
Sicame
BAH-031000010
TE Connectivity
HMFMCLKA048/SP
Sicame
BAH-031000009
TE Connectivity
HMFMCLKA049/SP
Sicame
BAH-022040054
TE Connectivity
HMFMCLKA050/SP
Sicame
BAH-031500050
TE Connectivity
HMFMCLKA051/SP
Sicame
BAH-031500051
TE Connectivity
HMFMCLKA052/SP
Sicame
BAH-025000058
TE Connectivity
HMFMCLKA053/SP
Sicame
BAH-035000098
TE Connectivity
HMFMCLKA054/SP
BAH-032020079
HMFMCLKA055/SP
BAH-032020101
Sicame
TE Connectivity
Sicame
TE Connectivity
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
2
30031284
30031285
30031286
30031287
30031288
185mm channel type straight connector. Fully insulated phase/neutral connector. Use in
conjunction with 30031246 for 4-core to 4-core waveform or 4-core waveform to PILC
2
185mm extended channel type straight connector. Fully insulated phase/neutral connector
(50mm longer). Used in conjunction with 30031201, 30031202 & 30031203 for temporary joints.
2
300mm channel type straight connector. Fully insulated phase/neutral connector. Use in
conjunction with 30031247 for 4-core to 4-core waveform or 4-core waveform to PILC
2
300mm extended channel type straight connector. Fully insulated phase/neutral connector
(50mm longer). Used in conjunction with 30031202 & 30031203 for temporary joints.
2
95mm channel type branch connector module. Fully insulated branch connector for use in
conjunction with 30031245 for 3-core waveform to PILC. 30031248 for 3-core to 4-core waveform
or 4-core to 4-core waveform.
2
30031289
95mm channel type branch connector C/W brass non-shear bolts module. Branch connector for
use in conjunction with 30031199 & 30031200 for strapping over cores in temporary joints.
HMFMCLKA056/SP
BAH-032020080
HMFMCLKA057/SP
BAH-032020102
HMFMCLKA058/SP
BAH-032020081
HMFMCLKA059/SP
BAH-032020103
HMFMCLKA060/SP
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
BAH-033000081
TE Connectivity
HMFMCLKA061/SP
Sicame
BAH-033000082
TE Connectivity
HMFMCLKA062/SP
Sicame
BAH-033000083
TE Connectivity
HMFMCLKA063/SP
BAH-033000084
Sicame
TE Connectivity
HMFMCLKA064/SP
Sicame
BAH-033000085
TE Connectivity
HMFMCLKA065/SP
BAH-033000086
HMFMCLKA066/SP
BAH-033000087
HMFMCLKA067/SP
BAH-033000088
HMFMCLKA068/SP
BAH-037100071
HMFMCLKA069/SP
BAH-037100072
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
2
30031290
30031292
30031293
30031294
30031295
30031296
30031297
30031298
185mm channel type branch connector module. Fully insulated branch connector for use in
conjunction with 30031245 for 3-core to 4-core waveform, 30031246 for 3-core waveform to PILC.
30031248 for 4-core to 3-core waveform. 30031249 for 3-core to 4-core waveform or 4-core to 4core waveform.
2
185mm channel type branch connector C/W brass non-shear bolts module. Branch connector for
use in conjunction with 30031201, 30032102 & 30031203 for use in temporary joints.
2
300mm channel type branch connector module. Fully insulated branch connector for use in
conjunction with 30031246 & 30031247 for 3-core to 4-core waveform. 30031247 for 3-core
waveform to PILC. 30031249 for 4-core to 3-core waveform. 30031250 for 3-core to 4-core
waveform or 4-core to 3-core waveform or 4-core to 4-core waveform.
2
300mm channel type branch connector C/W brass non-shear bolts module. Branch connector for
use in conjunction with 30032102 & 30031203 for strapping over cores in temporary joints.
2
95mm channel type ½ length branch connector module. Use in conjunction with 30031258 for
2
neutral to earth bond (where required) in 95mm 4-core waveform Stop End
2
300mm channel type ½ length branch connector module. Use in conjunction with 30031259 for
2
2
neutral to earth bond (where required) in 185/240mm or 300mm 4-core waveform Stop End
2
95mm Service Bridge Piece module. Fully insulated additional service phase/neutral bridge piece
for connecting service cables using connectors supplied in mains straight joint 30031245
2
185mm Service Bridge Piece module. Fully insulated additional service phase/neutral bridge
piece for connecting service cables using connectors supplied in mains straight joint 30031246
© SP Power Systems Limited
Page 39 of 54
30031299
30031300
30031301
30031302
30031303
30031304
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
2
300mm Service Bridge Piece module. Fully insulated additional service phase/neutral bridge
piece for connecting service cables using connectors supplied in mains straight joint 30031247
2
2
Up to 35mm PILC service cable Earth Bond Kit for up to 35mm earth wire module. For use with
Pilc service cable cut-out changes
2
2
50-120mm PILC Mains cable Earth Bond Kit for up to 70mm earth wire. Use in conjunction with
30031245, 30031254, 30031255, 30031256, 30031257, 30031199 & 30031200
2
2
185-300mm PILC Mains cable Earth Bond Kit for up to 70mm earth wire module. Use in
conjunction with 30031257, 30031199, 30031201 & 30031202
2
2
185-300mm PILC Mains cable Earth Bond Kit for up to 140mm earth wire module. Use in
conjunction with 30031246, 30031247, 30031255 & 30031257
Torque Limiting shear-off device module. Shear off device to ensure the correct torque has been
achieved on worm drive clips. Use in conjunction with temporary joints 30031199, 30031200,
30031201 & 30031202
30031305
95mm Aluminium mechanical shear-off lug module. Termination lugs for 95mm LV cables
30031306
185mm Aluminium mechanical shear-off lug module. Termination lugs for 185mm LV cables
30031307
300mm Aluminium mechanical shear-off lug module. Termination lugs for 240/300mm LV cables
30031308
480-740mm range taking Aluminium mechanical shear-off lug module. Termination lug suitable
2
for LV single core cables 480-740mm . Off set palm with 4 x M10 holes
2
95mm Aluminium mechanical shear-off busbar connector module. Busbar termination connector
2
for 70-95mm cables. Double headed shear-off side mounting M12
2
185mm Aluminium mechanical shear-off busbar connector module. Busbar termination connector
2
for 70-185mm cables. Double headed shear-off side mounting M12
2
300mm Aluminium mechanical shear-off busbar connector module. Busbar termination connector
2
for 70-300mm cables. Double headed shear-off side mounting M12
2
70-95mm pole termination module for 4c Waveform to overhead lines and fuses. Use in
2
conjunction with 30031263 & 30031265 When terminating 95mm Waveform cable
2
185mm pole termination module for 4c Waveform to overhead lines and fuses. Use in conjunction
2
with 30031264 & 30031266 When terminating 185mm Waveform cable
2
35-70mm brass shear-off lug module. Brass termination shear-off lug for stranded Copper
2
2
neutral/earth and earth wires in 95mm waveform cables and 35mm green/yellow earth wire
30031309
30031310
30031311
30031312
30031313
30031314
2
2
2
2
2
2
2
© SP Power Systems Limited
Page 40 of 54
HMFMCLKA070/SP
BAH-037100073
HMFMCLKA083/SP
BAH-035040026
HMFMCLKA084/SP
BAH-035030080
HMFMCLKA085/SP
BAH-035030081
HMFMCLKA086/SP
BAH-035030082
HMFMCLKA071/SP
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
BAH-018070233
TE Connectivity
HMFMCLKA072/SP
BAH-024020029
HMFMCLKA073/SP
BAH-024020039
HMFMCLKA074/SP
BAH-024020046
HMFMCLKA075/SP
BAH-034020118
HMFMCLKA076/SP
BAH-036010083
HMFMCLKA077/SP
BAH-036010084
HMFMCLKA078/SP
BAH-036010085
HMFMCLKA079/SP
BAH-034020119
HMFMCLKA080/SP
BAH-034020120
HMFMCLKA081/SP
BAH-024020011
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
Sicame
TE Connectivity
30031315
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
2
60-120mm brass shear-off lug module. Brass termination shear-off lug for stranded Copper
2
2
neutral/earth and earth wires in 185-300mm waveform cables and 70mm green/yellow earth wire
HMFMCLKA082/SP
BAH-024020018
Sicame
TE Connectivity
10.9 LV Abandonment Kits
SAP
Number
Description
Manufacturer Part Number
30980548
Single phase plastic service cable
CSCAK 1
30980549
Three phase plastic service & 95mm waveform
CSCAK 2
30980550
185mm, 240mm, & 300mm waveform
CSCAK 3
30980551
2-core PILC service cable diameter 18-25mm
CSCAK 4
30980552
4-core PILC service cable diameter 25-42mm
CSCAK 5
30980553
70-120mm 4-c PILC Main diameter 42-52mm
CSCAK 6
30980554
185-300mm 4-c PILC Main diameter 52-81mm
CSCAK 7
11
Approved
Manufacturer
3M
APPROVED LV LINK BOXES & SERVICE DISTRIBUTION UNITS
11.1 LV Link Boxes
SAP
Number
Description
Use in
Conjunction
with
Manufacturer Part
Number
30980234
2 way 3-core waveform link box untailed
30 Litres
HMFLBLVD-MANMK2
30980235
2 way 4-core waveform link box untailed
30 Litres
HMFLBLVD/2/4C
30980236
4 way 3-core waveform link box untailed
60 Litres
HMFLBLVD/4/3C
© SP Power Systems Limited
Page 41 of 54
Additional Information
Approved
Manufacturer
Sicame
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
30980237
4 way 4-core waveform link box untailed
60 Litres
HMFLBLVD/4/4C
N/A
2 way 4-core waveform link box untailed
20 Litres
BAH-038110098
Available from supplier
N/A
4 way 4-core waveform link box untailed
40 Litres
BAH-038110099
Available from supplier
N/A
2 way 3-core waveform link box untailed
13 Litres
BAH-038110065
Available from supplier
N/A
4 way 3-core waveform link box untailed
35 Litres
BAH-038110066
Available from supplier
N/A
4 way 3-core waveform link box untailed with 2
piece concrete manhole cover
35 Litres
BAH-038110101
Available from supplier
TE Connectivity
TE Connectivity
11.2 LV Service Distribution Unit
SAP
Number
Manufacturers
reference
Approval
Category
Remarks
N/A
LVD 12S
S
Installation is restricted to Cell-phone sites where multiple
services (usually 3-phase) are required at one location.
Additional Information
Available from supplier
Main cable – 95mm2 or 185mm2 3-core waveform only.
N/A
LVD 18S
© SP Power Systems Limited
S
Service cables – 25mm2 or 35mm2 single phase or 3- three
phase CNE service cables only.
Page 42 of 54
Approved
Manufacturer
Sicame
Available from supplier
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
11.3 Cable Sealing Caps
11.3.1 Heatshrink cable sealing caps
SAP
Number
30028257
30982129
30028258
30028259
30028260
30028261
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Description
For cable diameter 8mm to 18mm
For cable diameter 16mm to 31mm
For cable diameter 27mm to 49mm
For cable diameter 34mm to 68mm
For cable diameter 48mm to 90mm
For cable diameter 74mm to 108mm
For cable diameter 4mm - 8mm
For cable diameter 8mm - 16mm
For cable diameter 15mm - 32mm
For cable diameter 25mm - 51mm
For cable diameter 30mm - 61mm
For cable diameter 45mm - 80mm
For cable diameter 61mm - 126mm
Manufacturers Part No
102L022- R05/S
102L033- R05/S
102L044- R05/S
102L048- R05/S
102L055- R05/S
102L066- R05/S
SKE4/10
SKE8/20
SKE15/40
SKE25/63
SKE30/76
SKE45/100
SKE61/158
Additional Information
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Available from supplier
Approved Manufacturer
TE Connectivity
3M
11.3.2 Coldshrink cable sealing caps
SAP
Number
30980544
30980545
30980546
30980547
Description
2
For cables up to 35mm
2
2
For cables from 35mm up to 95mm
2
2
For cables from 95mm up to 185mm
2
2
For cables from 185mm up to 300mm
© SP Power Systems Limited
Manufacturers Part No
EC-1
EC-2
EC-3
EC-4
Additional Information
Approved Manufacturer
3M
Page 43 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
11.4 Approved Tapes
SAP
Number
30982992
Anti-Corrosion Wrapping Tape
50mm X 10m
30982114
Denso Tape
75mm X 10m
30982107
30982075
30982106
30982111
30982113
30982074
30982110
30982115
30982116
30982117
30982118
30982119
Butyl Mastic Tape
Hessian Tape
Vinyl Mastic Tape
25mm X 5m
50mm X 5m
38mm X 6m
blue
green/yellow
black
Black 38mm X 1.5m
L 19mm X 10m
L1 19mm X 10m
L2 19mm X 10m
L3 19mm X 10m
N 19mm X 10m
Type
Coloured insulating tape
33+ PVC Tape
Putty Tape
Numbered phase marking tape
© SP Power Systems Limited
Description
Page 44 of 54
Approved Manufacturer
Winn & Coles
Boddingtons
WT Henley
3M
12
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
APPROVED ISOCYANATE FREE RESINS
12.1 Permanent Resins
SAP
Number
Description
Kit Size (Litres)
Manufacturer
Part Number
Additional Information
30980246
MV Guroflex
10.0
30980244
30980243
Permanent JEM resin 6 litre Tub has black lid
Permanent JEM resin 2 litre Tub has black lid
Approved
Manufacturer
3 x 2litre packs
4 x 0.5litre pack
GUROFLEXMV-C1000
UJEM200P
UJEM050P
For 11kV and 33kV cable boxes
previously bitumen/G38 filled
For permanent LV, 11kV and 33kV joints
For permanent LV, 11kV and 33kV joints
TE Connectivity
Prysmian
12.2 Temporary Re-Enterable Resins
SAP
Number
Description
Kit Size (Litres)
Manufacturer
Part Number
Additional Information
30980245
Re-enterable JEM resin 6 litre Tub has red lid
3 x 2litre packs
UR2TEMP200P
For LV temporary joints only
13
Approved
Manufacturer
Prysmian
APPROVED PLUMBING METALS
13.1 Solder and Plumbing Metal
SAP
Number
30980870
30980868
Type
Abrasion tinning metal
Grade “H” plumbing metal
© SP Power Systems Limited
BSEN 29453 Ref.
SP spec 72/0650/03
Alloy number 6
Page 45 of 54
Nominal Weight (gm)
250
500
Approved
Manufacturer
DKL Metals Ltd
14
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
APPROVED CABLES UP TO AND INCLUDING 33KV
14.1 Approved Manufacturer References
Single or multiple “Approved Manufacturer” References are listed for each cable type in sections 14.2 to 14.6 below. This table is a key to the Approved
Manufacturer References used.
Reference
Manufacturer
Manufacturing location
CCC-B
Copper Cable Company
BFK Plant, Poland
Cab
Cabelte
Arcozelo, Portugal
Eric-S-S
Ericsson
Falun, Sweden
GC-Man
General Cables
Manlleu, Spain
GC-Mon
General Cables
Montcada, Spain
GC-Mor
General Cables
Morelena, Portugal
Nex-H
Nexans
Hanover, Germany
Nex-N
Nexans
Namsos, Norway
NKT-D
NKT
Asnaes, Denmark
NKT-G
NKT
Cologne, Germany
NKT-C
NKT
Changzhou, China
Pry-W
Prysmian
Wrexham, Clwyd
Trat-PSS
Tratos
Pieve San Stefano, Italy
© SP Power Systems Limited
Note
This factory has 3 extrusion lines, only cable manufactured on the
extrusion line designated “S119” is Approved for use.
Page 46 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
14.2 33kV Cables
2
14.2.1 XLPE Insulated Single Core with 50mm Copper Wire Screen.
SAP Number
30982960
30026576
30982971
30026185
30026186
30982961
30982962
Approved Manufacturer References
(see section 9.1 for key)
Description
2
150mm circular stranded Copper 33kV XLPE single core
2
150mm circular stranded Aluminium 33kV XLPE single core
2
240mm circular stranded Copper 33kV XLPE single core
2
240mm circular stranded Aluminium 33kV XLPE single core
2
400mm circular stranded Aluminium 33kV XLPE single core
2
500mm circular stranded Copper 33kV XLPE single core
2
630mm circular stranded Copper 33kV XLPE single core
Cab, GC-Man, Nex-H*, Nex-N, NKT-D, NKT-C, NKT-G,
Pry-W
Cab, GC-Man, Nex-H*, NKT-G, Pry-W
* The Nexans, Hanover factory has 3 extrusion lines. Only cable manufactured on the extrusion line designated “S119” is Approved for use.
14.3 11kV Cables
14.3.1 XLPE Insulated Single Core cables
SAP Number
30980100
30980101
30980102
30980098
30980099
30026565
Approved Manufacturer References
(see section 9.1 for key)
Description
2
95 mm circular solid Aluminium 11kV single core with red oversheath.
2
185 mm circular solid Aluminium 11kV single core with red oversheath.
2
300 mm circular solid Aluminium 11kV single core with red oversheath.
2
300 mm circular stranded Copper 11kV single core with red oversheath.
2
500 mm circular stranded Copper 11kV single core with red oversheath.
2
630 mm circular stranded Copper 11kV single core with red oversheath.
© SP Power Systems Limited
Page 47 of 54
Cab, NKT-D, Pry-W
Cab, NKT-D, Pry-W
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
14.3.2 XLPE Insulated Three Core cables
SAP Number
Approved Manufacturer References
(see section 9.1 for key)
Description
2
30980092
30980093
30980094
2
95 mm circular solid Aluminium 11kV 3-core with 70mm Copper wire screen
and red oversheath.
2
2
185 mm circular solid Aluminium 11kV 3-core with 95mm Copper wire screen
and red oversheath.
2
2
300 mm circular solid Aluminium 11kV 3-core with 95mm Copper wire screen
and red oversheath.
Cab, NKT-D, Pry-W
14.3.3 XLPE Insulated 1-core cables with LSOH Oversheath (Orange)
SAP Number
30980103
30980104
30980105
Approved Manufacturer References
(see section 9.1 for key)
Description
2
95 mm circular solid Aluminium 11kV single core with LSOH oversheath.
2
185 mm circular solid Aluminium 11kV single core with LSOH oversheath.
2
300 mm circular solid Aluminium 11kV single core with LSOH oversheath.
Cab, NKT-D, Pry-W
14.4 Low Voltage Cables
14.4.1 3-core & 4-core Waveform cable with Copper CNE or Earth conductor
SAP Number
30980172
30980173
30980174
30980150
30980151
30980149
Approved Manufacturer References
(see section 9.1 for key)
Description
2
3-core 95mm solid sectoral Aluminium waveform cable.
2
3-core 185mm solid sectoral Aluminium waveform cable.
2
3-core 300mm solid sectoral Aluminium waveform cable.
2
4-core 95mm solid sectoral Aluminium waveform cable.
2
4-core 185mm solid sectoral Aluminium waveform cable.
2
4-core 240mm solid sectoral Aluminium waveform cable.
© SP Power Systems Limited
Page 48 of 54
NKT-D, Pry-W
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
14.4.2 3-core & 4–core solid sectoral Aluminium Mains cable with concentric Copper CNE or Earth conductor and LSOH Oversheath (Orange)
SAP Number
30980175
30980176
30980177
30980152
30980153
30980154
Description
Approved Manufacturer References
(see section 9.1 for key)
3-core 95mm² Cu concentric N/E with LSOH oversheath.
3-core 185mm² Cu concentric N/E with LSOH oversheath.
3-core 300mm² Cu concentric N/E with LSOH oversheath.
4-core 95mm² Cu concentric N/E with LSOH oversheath.
4-core 185mm² Cu concentric N/E with LSOH oversheath.
4-core 300mm² Cu concentric N/E with LSOH oversheath.
NKT-D, Pry-W
14.4.3 LV Substation Cables, Single Core
SAP Number
30980166
30980167
30980168
Approved Manufacturer References
(see section 9.1 for key)
Description
2
480mm circular solid sectoral aluminium, armoured
2
600mm circular solid sectoral aluminium, un-armoured
2
740mm circular solid sectoral aluminium, armoured
© SP Power Systems Limited
Page 49 of 54
CCC-B
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
14.4.4 Service Cables
SAP Number
30026305
30980161
30980155
30026306
30026307
30980165
30980162
30026308
30026309
30980159
30980158
Approved Manufacturer References
(see section 9.1 for key)
Description
2
1-phase CNE 4mm copper straight concentric
2
1-phase CNE 25mm aluminium straight concentric
2
1-phase CNE 35mm aluminium straight concentric
2
3-phase CNE 25mm aluminium straight concentric
2
3-phase CNE 35mm aluminium straight concentric
2
1-phase SNE 4mm copper split concentric
2
1-phase SNE 25mm aluminium split concentric
2
1-phase SNE 35mm aluminium split concentric
2
3-phase SNE 25mm aluminium split concentric
2
3-phase SNE 35mm aluminium split concentric
2
3-phase SNE 35mm copper split concentric
Cab, Eric-S, GC-Mor
14.4.5 Service cables with LSOH Oversheaths (Orange)
SAP Number
30980156
30980160
30980163
30980164
30980157
30982986
30026310
Approved Manufacturer References
(see section 9.1 for key)
Description
2
1-phase CNE 35mm aluminium straight concentric with LSOH oversheath.
2
3-phase CNE 35mm aluminium straight concentric with LSOH oversheath.
2
1-phase SNE 35mm aluminium split concentric with LSOH oversheath.
2
3-phase SNE 35mm aluminium split concentric with LSOH oversheath.
2
1-phase CNE 25mm aluminium straight concentric with LSOH oversheath.
2
1-phase SNE 25mm aluminium split concentric with LSOH oversheath.
2
3-phase SNE 25mm aluminium split concentric with LSOH oversheath.
© SP Power Systems Limited
Page 50 of 54
Cab, Eric-S, GC-Man
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
14.5 Multi Core Cables
SAP Number
30980086
30980087
30980088
30980089
30982048
30982049
Description
Approved Manufacturer References
(see section 9.1 for key)
3-core cable with 2.5mm stranded copper conductors
4-core cable with 2.5mm stranded copper conductors
7-core cable with 2.5mm stranded copper conductors
7-core composite metering cable
12-core cable with 2.5mm stranded copper conductors (7/0.67mm)
19-core cable with 2.5mm stranded copper conductors (7/0.67mm)
CCC-B, GC-Man/Mon
14.6 Multi Pair Cables
Approved Manufacturer References
SAP Number
Pairs
Conductor
Remarks
30982050
30980090
30982053
30982051
30982052
Not on Stock
7
7
10
19
37
61
1/0.8mm Cu
1/0.8mm Cu
1/0.8mm Cu
1/0.8mm Cu
1/0.8mm Cu
1/0.8mm Cu
Unfilled. Induced voltage < 5kV
Filled. Induced voltage >5kV <15kV
Unfilled. Induced voltage < 5kV
Unfilled. Induced voltage < 5kV
Unfilled. Induced voltage < 5kV
Unfilled. Induced voltage < 5kV
© SP Power Systems Limited
(see section 9.1 for key)
Page 51 of 54
CCC-B, Trat-PSS
15
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
CABLE SYSTEMS FOR USE AT 132 KV AND ABOVE
Approvals detailed in this section are non-project specific. Listed cables and accessories are qualified
as individual items, allowing them to be included in Tender submissions for future cable projects at
132kV and above.
Prior to connection to the Company’s network, a further project specific assessment is required, this will
consider the offered cable system design as a whole, the compatibility of the individual components and
their suitability for the Project in question. This project specific assessment will be carried out postTender and prior to contract award.
The detail and limitations of the range of Approvals for each manufacturer is documented separately to
maintain confidentiality and has been advised individually to each manufacturer.
15.1 132kV XLPE cables and associated accessories
Cables and accessories for 132kV shall comply with the requirements of CAB 03 031. The following
manufacturers are Approved.
Manufacturer
Approved Cable Manufacturing
Sites *
Approved Accessories **
Nexans
Charleroi, Belgium
Straight joints, sectionalising straight
joints, outdoor terminations, gas
immersed terminations.
NKT
Cologne, Germany
Straight joints, sectionalising straight
joints, outdoor terminations.
Prysmian
Delft, Holland
Straight joints, sectionalising straight
joints, XLPE to oil transition joint,
terminations, gas immersed
terminations.
Gron, France
Wrexham, United Kingdom
*
Only specific extrusion lines are Approved for each site. The details of Approved lines have
been advised to each manufacturer.
**
A limited range of accessories is Approved from each Manufacturer. The details of Approved
accessories have been advised to each manufacturer.
© SP Power Systems Limited
Page 53 of 54
Approved Equipment Register
CAB-06-001
Cables and Cable Accessories
Issue No. 11
15.2 275kV XLPE cables and associated accessories
Manufacturer
Approved Manufacturing Sites *
Approved Accessories **
ABB
Karlskrona, Sweden
Straight joints, sectionalising straight
joints, outdoor terminations.
Nexans
Charleroi, Belgium
Straight joints, sectionalising straight
joints, outdoor terminations.
NKT
Cologne, Germany
Straight joints, sectionalising straight
joints, outdoor terminations.
Prysmian
Gron, France
Straight joints, sectionalising straight
joints, outdoor terminations, gas
immersed terminations.
15.3 400kV XLPE cables and associated accessories
Manufacturer
Approved Manufacturing Sites *
Approved Accessories **
ABB
Karlskrona, Sweden
Straight joints, sectionalising straight
joints, outdoor terminations.
Nexans
Charleroi, Belgium
Straight joints, sectionalising straight
joints, outdoor terminations.
NKT
Cologne, Germany
Straight joints, sectionalising straight
joints, outdoor terminations.
Prysmian
Gron, France
Straight joints, sectionalising straight
joints, outdoor terminations, gas
immersed terminations.
*
Only specific extrusion lines are Approved for each site. The details of Approved lines have
been advised to each manufacturer.
**
A limited range of accessories is Approved from each Manufacturer. The details of Approved
accessories have been advised to each manufacturer.
© SP Power Systems Limited
Page 54 of 54