FLUORESCENT OPTIONS
1601-OA
Ballast Ordering Info.
Due to the changing nature of ballast availability, it is extremely important to clarify any special requirements you desire.
Number of Fluorescent Ballasts
Ballast Type
(Installed in Luminaire)
Suffix to catalog number:
Suffix to catalog number:
–
–
1/3
Designation
Designation
Only if electronic or other than standard
1/1 – One 1 lamp ballast
1/2 – One 2 lamp ballast
1/3 – One 3 lamp ballast
1/4 – One 4 lamp ballast
2/1 – Two 1 lamp ballasts
2/2 – Two 2 lamp ballasts
2/3 – Two 3 lamp ballasts
2/4 – Two 4 lamp ballasts
1/42 – One 4 lamp & one 2 lamp ballast
1/21 – One 2 lamp & one 1 lamp ballast
4/2 – Four 2 lamp ballasts
3/2 – Three 2 lamp ballasts
*Note: Always use when designating Electronic
Ballast.
Example: A 2'x4', 3 lamp luminaire with one 3 lamp electronic
ballast would be ordered as:
XXXXXXXX
-UNV
Luminaire cat. #
Voltage
EBHE
-1/3
-EB
Only if other than standard
EB – Electronic ballast (instant start, <20% THD)
EB10I – Electronic ballast, THD less than 10%, instant start
EB10R – Electronic ballast, THD less than 10%, program start
EBL10R – T8 Electronic program start ballast, low ballast factor
EBH10R – T8 Electronic program start ballast, high ballast factor
EBL – T8 Electronic ballast, low ballast factor
EBH – T8 Electronic ballast, high ballast factor
EBHE – T8 Electronic ballast, high efficiency, std. ballast factor
EBLHE – T8 Electronic ballast, high efficiency, low ballast factor
EBHHE – T8 Electronic ballast, high efficiency, high ballast factor
EBSD – T8 Electronic ballast, step dimming, std (.88) ballast factor
EBSD104 – T8 Electronic ballast, step dimming, 1.04 ballast factor
EB95 – 28wT5 Electronic ballast, .95 ballast factor
EB115 – 28wT5 Electronic ballast, 1.15 ballast factor
EBSD95 – T5 Electronic ballast, step dimming, 0.95 ballast factor
EBSD115 – T5 Electronic ballast, step dimming, 1.15 ballast factor
EBSD80 – 54wT5HO Electronic step dimming ballast, .80 ballast factor
EBD – Electronic ballast, dimming*
LT – Low temperature (0°F) start, where available.
LT20 – Low temperature (-20F) start where available.
ESNOLP – Electronic ballast for energy saving (25/28/30W) T8 lamps, use when
lamps are not specified with the luminiare
ILW – In-line wiring for tandem luminaires with multiple ballasts (standard wiring is side-by-side)
Note: -20°F ballasts are standard in High Output applications.
Note: Low temperature operation is not available with energy
saving lamps.
*Please specify type to ensure compatibility w/dimming controls.
Ballast Options
Suffix to catalog number:
–
B332PUNVP
Ballast
Only if required
B332PUNVHP – 32W RS 3LP UNV Electronic (Universal)
ULT – Universal Transformer brand
ADV – Advance brand
OSI – Sylvania brand
GE – GE brand
Other – Use actual Manufacturer's Catalog No.
Use this option when a specific manufacturer’s ballast catalog number
is desired. If no ballast catalog number is specified, a generic ballast
selected by Philips Day-Brite will be supplied.
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
1601-OA 04/13 Mounting Ballast Options
Suffix to catalog number:
–
4B
Designation
Only if other than standard
Blank – Standard mounting
4B – Four bolt ballast mounting
RM – Remote ballast mounting
TF – Top fixture ballast mounting
*Note: If a grounding lug is required, suffix "L".
Example: 4BL
FLUORESCENT OPTIONS
1601-OA
Flex
(Factory Wired)
Suffix to catalog number:
–
Emergency Fluorescent Ballast
F1
(Installed in Luminaire)
Suffix to catalog number:
–
Designation
Order by quotation only
F1 – 3/8" Diameter, three wires (Black, White, Green), 18 gauge, 6'
F2 – 3/8" Diameter, four wires (Black, White, Red, Green), 18 gauge, 6'
F2/5W – 3/8" Diameter, five wires (Black, White, Red, Blue, Green), 18 gauge, 6'
F3 – 1/2" Diameter, four wires (Black, White, Green, Brown), 18 gauge, 6' F4 – 1/2" Diameter, four wires (Black, White, Green, Brown), 14 gauge, 6'
F5 – 1/2" Diameter, three wires (Black, White, Green), 12 gauge, 6'
F6 – 1/2" Diameter, four wires (Black, White, Red, Green), 12 gauge, 6'
F7 – 3/8" Diameter, three wires (Brown, White, Green), 14 gauge, 6'
F8 – 3/8" Diameter, three wires (Black, White, Green), 14 gauge, 6'
F9 – 3/8" Diameter, three wires (Black, White, Green), 12 gauge, 6'
F10 – 1/2" Diameter, three wires (Black, White, Green), 14 gauge, 6'
F11 – 3/8" Diameter, four wires (Black, White, Red, Green), 14 gauge, 6'
F12 – 3/8" Diameter, four wires (Black, White, Red, Green), 12 gauge, 6'
F13 – 1/2" Diameter, three wires (Black, White, Green), 18 gauge, 6'
All of the above include two straight connectors.
Consult factory representative for other types.
Lamps
Designation
Only if other than standard
E1 – DEB-1 Standard Emergency Ballast*,
for T8/T12/CF lamps, 350-450 lumens
E1LP – DEB-1LP Low Profile Standard Emergency Ballast,
for F32T8 lamp, 450 lumens
E3 – DEB-3 High Lumen Emergency Ballast*,
for T8/T12/CF lamps, 3000 lumens with F32T8
E5 – DEB-5 Premium Emergency Ballast*,
for T8/T12/CF lamps, 1100-1400 lumens
E5LP – DEB-5LP Low Profile Premium Emergency Ballast*,
for T8/T12/CF lamps, 1100-1250 lumens
E5ST – DEB-5ST Premium Emergency Ballast with self-test*,
for T8/T12/CF lamps, 1100-1400 lumens
E6LP – DEB-6LP Low Profile Emergency Ballast*,
for T5/T5HO/T8/CF lamps, 750-1325 lumens
E7 – DEB-7B Specification Emergency Ballast*,
for T8/T12/CF lamps, 600-700 lumens
E7LP – DEB-7LP Low Profile Specification Emergency Ballast*,
for T5/T5HO/T8/CF lamps, 430-700 lumens
E7W – DEB-7W Emergency Ballast (wet location)*,
for T8/T12/CF lamps, 600-700 lumens
E5W – DEB-5W Premium Emergency Ballast (wet location)*,
for T8/T12/CF lamps, 1350 lumens with F32T8
E65 – DEB-65 Emergency Ballast (for hazardous location luminaires)*,
for T8/T12/CF lamps, 350-700 lumens
(Installed in Luminaire)
Fusing (for fluorescent luminaires only)
(Installed in Luminaire)
Suffix to catalog number:
–
E7
LPT835HL
Suffix to catalog number:
–
GMF
2
Fuse Type
Quantity/Luminaire
Designation
Order by quotation only.
LPT735* – Generic, T8 735 3500K 70+ CRI
LPT835* – Generic, T8/T5/T5HO/CF, 835 3500K 80+ CRI
LPT835HL* – Generic, high lumen T8/T5, 835 3500K 80+CRI
LPT835/25ES* – Generic, 25W energy saving 4' T8 or CFTT5, 835 3500K 80+ CRI
LPT835/28ES* – Generic, 28W energy saving 4' T8, 835 3500K 80+ CRI
LPT835/30ES* – Generic, 30W energy saving 4' T8, 835 3500K 80+ CRI
LPT835/49ES* – Generic, 49W energy saving 4' T5HO, 835 3500K 80+ CRI
**For lamps by a specific manufacturer, substitute P for Philips, G for G.E.,
or S for Sylvania in place of the T (example: LPP735).
For 3000K replace "35" with "30".
For 4100K replace "35" with "41".
GLR – Fuse, fast blow
GMF – Fuse, slow blow
1
2
3
4
Location
Blank – Under ballast cover
X – External mounting
Example: –GLR1 = One GLR fuse per luminaire, mounted under ballast
cover.
Contact Factory Representative for other types.
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
1601-OA 04/13 Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008