Rev. Description
4 Loctite 242 / 89 lb-in
Initiator
Date
02 Renumbered BOM items, corrected pressure in Bar.
DKL
6/18/2012
03 Module width was 160mm
DKL
7/12/2012
7 Loctite 222 / 25 lb-in
to Tool Changer
HB9
MASTER
Apply anti-seize compound to
the pin shank prior to installation.
6
Thread locker Note:
Fasteners on this drawing include both torque and thread locker specifications.
Thread locker (Loctite) is only required when re-using existing fasteners. New fasteners from ATI have pre-applied thread locker.
4 Loctite 242 / 89 lb-in
to Tool Changer
2
See Note 1
1
03
159.5
52.2
3 Loctite 242 / 89 lb-in
to Tool Changer
5
HB9 Module Specifications
Hydraulic Ports, (qty) Size (Cv)
(2) G1/2 (BSPP) (2.26)
Maximum pressure of 7200 psi (496 bar),
Self-sealing on Master and Tool
73.1
93.5
Coupled
(Approx.)
(2) G1/2 (BSPP)
(Master & Tool)
Loctite 222 / 12 lb-in
to Tool Changer
74 lb [330 N]
Hydraulic Separation Force
(per pressurized line)
G1/2 force (lb f ) = 0.33 x PSI
(N) = 21.4 x bar
ITEM QTY. PART NUMBER
NO.
1
2
3405-1210002-01
2
2
3405-1210003-01
DESCRIPTION
Coupling,Fem.,Hyd.
Coupling,Male,Hyd.
M6 x 16mm SHCS Blue Dyed Magni ND
Microspheres
M6 x 20mm SHCS Blue Dyed Magni ND
Microspheres
25/64" BUSHING - McMaster8491A379
Hydraulic Module Alignment Pin
Master Cleat Sub-Assembly
Tool Cleat Sub-Assembly
66
HB9
TOOL
8
Static Separation Force
(total spring force for 2 couplers)
41.2
32.5
51.6
38.9
(TYP.)
HB9
MASTER
HB9
TOOL
3
2
3500-1066016-15A
4
4
3500-1066020-15A
5
6
7
8
2
2
1
1
3690-6013801-11
3700-20-4517
9005-20-1198
9005-20-1199
NOTES: UNLESS OTHERWISE
SPECIFIED.
1031 Goodworth Drive, Ape9, NC 27539, USA
Tel: +1.919.772.0115 Email: info@ati-ia.com
Fa9: +1.919.772.8259 www.ati-ia.com
ISO 9001 Registered Company
DO NOT SCALE DRAWING.
ALL DIMENSIONS ARE IN
MILLIMETERS.
PROPERTY OF ATI INDUSTRIAL AUTOMATION, INC. NOT TO BE REPRODUCED IN ANY
MANNER E9CEPT ON ORDER OR WITH PRIOR WRITTEN AUTHORIZATION OF ATI.
NOTES:
1. The couplers separate into front and rear halves for installation.
After installation, torque the coupler halves to 51 lb-ft, NO LOCTITE
2. See 9630-20-HYD for circuit plumbing information.
3. See 9630-20-COUPLER for coupler maintenance information.
3rd ANGLE PROJECTION
DRAWN BY:
D.Lawson-6/7/12
CHECKED BY:
D.Wagner-6/8/12
PROJECT #
120601-1
SHEET 1 OF 1
TITLE
HB9 Hydraulic Module Drawing
SCALE
SIZE
DRAWING NUMBER
1:3
B
9630-20-HB9
REVISION
03