23A Desktop Switching Power Supply Built-in Battery Backup Circuit Model SEC-1223BBM 13.8 VDC 120 VAC 23 Amps Design Features -- Advanced Switch Mode Technology -- Reliable, 12V Nominal DC Uninterruptible Power Source (DC UPS) in conjunction with external 12V Lead Acid Battery backup -- High efficiency, compact and portable -- Protected against short circuit, overload, over voltage and over temperature -- Cooling by temperature controlled fan improves efficiency and prolongs life of the fan -US - UL safety listed as “Information Technology Equipment Power Supply” for USA C (UL Standard ANSI/UL-60950-1) and for Canada (CSA Standard CAN/CSA-C22.2 LISTED No. 60950-1) -- Complies with FCC Part 15(B), Class B for limits on conducted and radiated C UL US Electromagnetic Interference (EMI) CAMERA-READY LOGOTYPE OF THE UL LISTING MARK FOR CANADA AND THE U.S. These Marks are registered by Underwriters Laboratories Inc. 3 YEAR WARRANTY UL C UL C C UL UL US LISTED US LISTED US LISTED C UL LISTED US LISTED ModelULNo. C The minimum height of the registered trademark symbol shall be 3/64 of an inch. When the overall diameter of the UL Mark is less than 3/8 of an inch, the trademark symbol may be omitted if it is not legible to the naked eye. UL US C LISTED US LISTED Input Voltage RELATIVE DESIGN & PROPORTIONS OF THE UL LISTING MARK FOR CANADA AND THE U.S. KEY TO DIMENSIONS N Input Current at: Input Voltage: 120 VAC; P AC INPUT J F C F A F G J P “C” and “US” 34 units P 56 units Q 75 units R 30 units 35 units 59 units 85 units 87 units 176 units 216 units “LISTED” T 201 units 0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 192 204 216 Input Current at No Load Inrush current at Startup US Output C LISTEDVoltage Output Voltage Noise and Ripple LISTED Continuous Output Current/ Load Terminals / Battery Terminals Output Current Limit / Load Terminals / Battery Terminals Efficiency at Full Load M Q K UL G B I T L D E H P I F P T Please note: Not all of these elements should be used together with the same UL Mark. The word “LISTED” would only be used once — either to the right of or below the UL Mark (as shown). The font for all letter forms is Helvetica Condensed Black, except for the trademark symbol , which is Helvetica Condensed Medium. No other fonts are acceptable. 200-195S 10M/8/98 EXTERNAL BATTERY (Not included) PROTECTIONS I J K L M N 0 Output Voltage: 13.8V; Output Current: 23A O DC OUTPUT UL Mark 8 units A 13 units B 14 units C 15 units D 17 units E 20 units F 24 units G 29 units H R Voltage / CAPACITY Short Circuit, Overload Over Voltage Over Temperature COOLING Forced Air Internal AC Side Fuse FUSES External DC Side Fuse for External Battery (By User) Safety COMPLIANCE Electro Magnetic Interference (EMI ) AC Input Connection INPUT/OUTPUT CONNECTIONS DC Output Connectors for Load and Battery Connections Battery cables ENVIRONMENT GENERAL Operating Temperature Range Dimensions (W x D x H) mm/INCH Weight (kg/lb) NOTE: Specifications are subject to change without notice SEC-1223BBM 120 VAC Nominal (+6% / -10%), 60 Hz 5.5A @ 120 VAC 53 mA ± 10% 28A ± 5% for 2.8 ms Load Terminals: 13.8 VDC / Battery Terminals: 13.8 VDC < 150 mV Peak to Peak 23A / 19A / 4A 25A / 21A / 4A 85% ± 5% 12V / 40Ah to 100Ah; Lead Acid Output voltage drops; Auto reset Regulated by PWM Controller Output shuts down (Internal hot spot ≥ 100°C / 212°F); Auto reset on cooling down Temperature controlled fan (ON when internal hot spot ≥ 70°C / 158°F) 5 mm x 20 mm Glass Fuse / 250V, 6.3A, Time Delay Type Bussmann: “GDC-6.3”; LittelFuse - “21806.3” - 32V, 25A, Fast Acting - In series with Positive Battery Terminal and output terminal marked “Battery +” - Within 7” of the Battery Positive Terminal UL safety listed as “Information Technology Equipment Power Supply” for USA (UL Standard ANSI/UL-60950-1) and for Canada (CSA Standard CAN/CSA-C22.2 No. 60950-1) FCC Part 15(B), Class B - “IEC 320-C14” Inlet Connector on the unit - Detachable Power Cord with: “IEC 320-C13” Connector on one end & NEMA5-15P Plug on the other end Terminal with Tubular Hole - Diameter 5mm / 0.2” and set screw (#10, 24 TPI, 5/16” long) Minimum AWG #10 as per NEC Table 310.15(B)(17) - Ampacity 40A (1.25 times Maximum current of 25A) - Conductor temperature rating of 75°C / 167°F 0°C to 40°C / 32°F to 104°F 185 x 240.5 x 61 / 7.28 x 9.47 x 2.40 1.6 / 3.4 12001-SEC-1223BBM-0713 To view a full selection of Samlex products visit our website at www.samlexamerica.com or contact us: 1(800) 561-5885 or sales@samlexamerica.com