While Coates Hire makes every effort to supply the
equipment described and pictured in this brochure, all
equipment offered is subject to availability. Should Coates
Hire through whatever circumstances need to offer an
alternative make or model, customers can be assured
that this will be of the same quality as the item shown or
displayed in this brochure. All information about equipment
in this brochure is to the best of our knowledge correct, but
we would urge customers to check all details at the time
of hire or enquiry. Coates Hire reserves the right to change
COA_BROC019_0312
coateshire.com.au
With over
1.5million
24/7
pieces of plant and equipment and over
125 years of expertise, Australia’s most
experienced hire company is on the job
That’s why you can count on Coates Hire
for the best Power, Light & Welding
solutions, across the nation.
to make sure you are too.
CONTENTS
Power, Light & welding
Power Generators
Portable – Briefcase-type
Portable – Rollframe-type (unsilenced)
Portable – Trailer-Mounted
Silenced – Skid-Mounted under 20kVA
Silenced – Skid-Mounted 20 to 80kVA
Silenced – Skid-Mounted 100 to 270kVA
Silenced – Skid-Mounted 300 to 1250kVA
Silenced – Trolley/Inverter Type
Generator Accessories
5 Slot Cable Covers
02
02
02
03
03
04
04
05
05
06
06
Lighting Equipment
07
Hydraulic Lighting Towers
07
Lunar LightsTM07
Uplights08
Small Lighting Stands
08
LED Doublesided Portable Light
08
Welding Equipment
Inverters – Handyman Range
Inverters – Contractor Range
Inverters – Professional Range
Transformers – Heavy Fabrication
Engine Driven – Light Contractor Range
Engine Driven – Medium Contractor Range
Engine Driven – Heavy Contractor Range
Welding Accessories
09
10
10
11
11
12
12
13
13
Power Generators
As generator specialists, Coates Hire has the equipment and technical expertise to provide cost effective
solutions for every power need. Our fleet, the largest in Australia, consists of portable units and silenced
skid-mounted machines between 650 watts and 1400kVA. With multi Megawatt Power Stations it’s
possible to assemble up to 32 sets in one bank.
Remote control options are also available via Next G, SMS, wireless VPN and SCADA communication.
Our generators are available 24 hours a day for applications in the entertainment, maintenance, utility
resource, construction, event and light-industrial markets.
Trailer-Mounted
Portable Generators
Suitable For
Any application where maximum mobility of the generator is desirable such as events, light
industry and utilities’ maintenance.
Briefcase-type
Suitable For
Small social events, entertainment and camping, lighting, hand tools, small appliances, radios,
PA systems and more.
Features and Benefits
Portability of the machine allows it to be deployed on multiple sites during a single hire.
Trailer-mounted specifications
Features and Benefits
Super-sound-reduced for quiet operation, compact and lightweight allowing for easy handling
and transport, simple recoil start for ready use, economical 4-stroke engine.
Briefcase-type specifications
650w
240v
1000w
240v
4.1 amps
240v
8.3 amps
Rollframe-type (unsilenced)
Light and heavy industry, high-current power tools and appliances, building construction sites,
compressors, welders, electric jackhammers, pumps, hot-water units and more.
28 amps
35kVA (28kW)
240/415v
48 amps
Skid-Mounted – Under 20kVA
Suitable For
Features and Benefits
Heavy duty rollframe (including wheels and handle on 5kVA and above allowing for easy and
safe transportation), electric-start operation on selected units. Fitted with earth leakage
protection for safety and reliable operation.
RollFrame-type (unsilenced) specifications
:Power, Light & Welding
20 amps
240/415v
Silenced Generators
Suitable For
2
240/415v
3 amps
2000w
2kVA (2kW)
240v
8.4 amps
3kVA (3kW)
240v
12.5 amps
5kVA (5kW)
240v
21 amps
7.5kVA (7.5kW)
240v
32 amps
8kVA (8kW)
240v
33.5 amps
42 amps
10kVA (10kW)
15kVA (12kW)
20kVA (16kW)
240v
For further information visit www.coateshire.com.au/products
Events and entertainment industries, film and television, concerts, festivals, sporting and
community cultural events.
Features and Benefits
Silenced canopies for quiet operation, large fuel tanks for uninterrupted use, multiple
outlet configurations for different connections, earth leakage protection providing safe and
reliable operation.
Skid-mounted – Under 20kVA specifications
8kVA (8kW)
240v
32 amps
10kVA (8kW)
240/415v
14 amps
12.5kVA (10kW)
240/415v
17 amps
15kVA (15kW)
240v
61 amps
15kVA (12kW)
240/415v
20 amps
Note: Equipment availability may vary from branch to branch.
Power, Light & Welding : 3
Power Generators
Power Generators
Skid-Mounted – 20 to 80kVA
300 to 1400VA
Building construction, light and heavy industry, mining and resources electrical testing,
pumping and industrial equipment, site power, process machinery, plant shutdowns and
ongoing maintenance.
Utilities, remote power, mining, construction, ongoing operations, large industrial shutdowns,
standby power, hospitals, mining and industrial processing plants, prime power, multi-megawatt
power stations and large events.
Features and Benefits
Features and Benefits
Robust silenced canopies, skid bases complete with lifting hooks for ease of transportation
around site, fixed outlets available on units up to 125kVA, fixed terminals for connection of
cables and a variety of protection systems available to suit many applications.
Large fuel tanks for uninterrupted use, range of protection equipment to suit many applications,
sound-reduced and sound-proof canopies, optional remote starting and paralleling facilities,
the latest in digital engine management and protection systems. Units can be configured for
multi-unit operation, up to 32 sets can be set up in one bank.
Suitable For
Suitable For
Skid-mounted 20 to 80kVA specifications
16kW
240/415v
28 amps
25kVA
20kW
240/415v
35 amps
300kVA
240kW
240/415v
417 amps
313kVA
250kW
240/415v
435 amps
31kVA
25kW
240/415v
43 amps
35kVA
28kW
240/415v
49 amps
320kVA
256kW
240/415v
445 amps
350kVA
280kW
240/415v
487 amps
375kVA
300kW
240/415v
521 amps
36kVA
29kW
240/415v
50 amps
50kVA
40kW
240/415v
70 amps
56kVA
45kW
240/415v
78 amps
60kVA
48kW
240/415v
83 amps
70kVA
56kW
240/415v
97 amps
80kVA
64kW
240/415v
111 amps
:Power, Light & Welding
CONTAINERISED 550 to 1400KVA SPECICATIONS
500kVA
400kW
240/415v
700kVA
560kW
240/415v
695 amps
973 amps
750kVA
600kW
240/415v
1043 amps
1000kVA
800kW
240/415v
1400 amps
1250kVA
1000kW
240/415v
1738 amps
Skid-Mounted – 100 to 270kVA
Trolley/Inverter-type
Utilities, remote power, mining, construction, ongoing operations, large industrial shutdowns,
standby power, hospitals, mining & industrial processing plants, prime power & large events.
Events, entertainment and other applications where minimal noise is critical, lighting, camping,
PA systems, food vans, TVs, computers and more.
Features and Benefits
Features and Benefits
Large fuel tanks for uninterrupted use, range of protection equipment to suit many applications,
sound-reduced and sound-proof canopies, optional remote starting and paralleling facilities,
the latest in digital engine management and protection systems.
Compact super-sound-reduced canopies, quiet and efficient operation, with many units
incorporating automatic voltage regulators to minimise voltage fluctuations, key-start for
effortless operation.
Skid-mounted 100 to 270kVA specifications
Trolley/inverter-type specifications
Suitable For
Suitable For
4
Skid-mounted 300 to 500kVA specifications
20kVA
100kVA
80kW
240/415v
139 amps
4.3kVA (4.3kW)
240v
19 amps
110kVA
88kW
240/415v
153 amps
4.6kVA (4.6kW)
240v
19 amps
125kVA
100kW
240/415v
174 amps
150kVA
120kW
240/415v
209 amps
5kVA (5kW)
240v
21 amps
160kVA
128kW
240/415v
222 amps
180kVA
144kW
240/415v
250 amps
200kVA
160kW
240/415v
278 amps
250kVA
200kW
240/415v
348 amps
260kVA
208kW
240/415v
361 amps
270kVA
216kW
240/415v
375 amps
For further information visit www.coateshire.com.au/products
Note: Equipment availability may vary from branch to branch.
Power, Light & Welding : 5
Power Generators
Lighting Equipment
Our range of commercial and maintenance night-lighting solutions enable the work area to be
adequately lit, creating a safer environment. They are quick to set up, easy to reposition, hydraulically
raised, adjustable to give optimum site coverage – height/tilt/direction, and suitable for a variety of
applications and weather conditions.
Generator Accessories
Hydraulic Lighting Towers
Coates Hire provide a full range of accessories to complement your generator hire such as:
Suitable For
• Automatic and manual transfer switches
• Changeover contactor panels
• Changeover switches
• Cable covers
• Distribution boards
• Distribution centres
• Earth leakage boxes
• Extension leads
Commercial construction, heavy industry, transport infrastructure, mining and events,
roadworks, utilities and factory maintenance, construction and tunnel works.
• 4-core earth cables
• Fuel bowsers
• Generator switchboards
• Load banks
• Load centres
• Power cables
• Power distribution boxes
Features and Benefits
Silenced for quiet operation, hydraulic mast operation for easy and safe use, latest in
global technology for maximum illumination, large fuel tanks for uninterrupted use, highly
manoeuvrable for use in limited-access areas.
Hydraulic Lighting Tower specifications
Mobile
9m
4 x 1000w
Tungsten, Halogen
9m
4 x 1000w
Metal Halide
9m
4 x 1000w
Metal Halide
9m
4 x 1500w
Metal Halide
12.5m
4 x 1500w
Linear Metal Arc
4m
4 x 1000w
Metal Halide
12m
12 x 2000w
Metal Halide (Super Skid)
Skid
5 Slot Cable Covers
Lunar Lights®
• Weight Loading: NATA Laboratory Tested to 4.6 T per tyre for 5 Minutes
(Equivalent to 18.4T per axle)
• Connecting System: Integrated male-female allowing any length to be achieved
• Non-Conductive
• Patented 5 bar tread surface provides maximum traction.
• Inbuilt carry handle makes it easier to carry one unit in each hand
• UV Stabilised
• Very low profile design decreases trip risk significantly compared
to other higher profile products
Suitable For
Mining, roadworks, maintenance and construction, shutdowns, events, emergency services,
TV commercials, movie-making and advertising.
Features and Benefits
These glare free portable units duplicate daylight colour temperature of 6000K and can be
used in all weather conditions. 380,000 lumens output from a single globe. Light source can
be directional or 360°, shadowless. Creates a safer working environment. Diesel fuel capacity
250L, the fully hydraulic telescopic mast extends 10 metres, the 4 stabiliser legs are individually
controlled, silenced unit.
Cable covers SPECIFICATIONS
Weight
Length
15.5kg
900 mm
Channels
5
6
:Power, Light & Welding
Width
Height
500mm
50mm
Channel Dimensions
4000W HMI Lunar Lighting Tower® Specifications
360˚ Diffused Head
Mast height: 10m
4 – 34 (W) x 36 ( H) mm
1 – 40 (W) x 36 ( H) mm
For further information visit www.coateshire.com.au/products
1x 4,000W
HMI globe
360˚ Dome Head
Mast height: 10m
1x 4,000W
HMI globe
Colour Temp
6000 Kelvin
Daylight reproduction
Lumens
380,000
1 globe
Note: Equipment availability may vary from branch to branch.
Power, Light & Welding :
7
Lighting Equipment
Welding Equipment
Coates Hire is the leading hirer of welding equipment Australia-wide. With 200 branches across Australia
we stock the largest and most comprehensive range of welders and welding accessory equipment to suit
your specific requirements. From small electric welders to 600-amp diesel driven units and everything
in-between, you’re sure to get the welders and welding equipment to get the job done.
Electric Welders
Uplights
Suitable For
Confined spaces, shutdowns, maintenance projects, weddings, handyman, general construction,
backup and emergency lighting, parties and events.
Coates Hire stock a wide range of portable electric welders for construction, resource, industrial,
workshop or farm use. Variable duty cycle and current flows including up to a maximum of
600 amps. They can be used for a variety of welding techniques, including stick electrode, wire
feeders, Mig and Tig.
Wire feeder and remotes can be added to most machines.
Engine Driven Welders
Features and Benefits
Provides bright light using a standard triphosphor tube outputting 18 watts of power (two foot
unit) and 36 watts of power (four foot unit). Up to 70 units can be piggy-backed off one power
point. Models have a round, weighted base or heavy rubber foot, enabling them to reposition
themselves if knocked over.
Uplight specifications
Heavy-duty engine driven welders can be operated anywhere. They produce a wider range of
welding currents to suit specific electrodes. We have welder/generator units that provide 240V
single phase and three phase 415V auxillary power up to 18kVA which can be used to run small
motors, power tools, lighting and domestic appliances. They can be operated concurrently or
when the unit is not being used for welding.
Wire feeders and remotes can be added to most machines.
Two foot unit
20,000hrs
18w output
Four foot unit
20,000hrs
36w output
Voltage Reduction Devices (VRDs)
Late model electric and diesel welders have internal VRDs fitted for applications where this
feature is required.
Small Lighting Stands
Suitable For
Temporary lighting applications such as parties, area lighting, maintenance projects, shutdowns,
confined spaces, emergency services, general construction, roadworks and events.
Small Lighting Stand specifications
Single
250w
Specialised Welding Equipment
Flood
Twin
250w
Flood
Plasma Cutters
Triple
250w
Flood
Single
500w
Halogen
Dual
500w
Halogen
Powerful plasma cutters are ideal for metals such as stainless aluminium and copper that
cannot be cut or are difficult to cut, using gas. They are diesel or electric-powered and portable,
requiring an air supply.
Single
1500w
Flood
Spot Welders
These electric-powered units perform precise spot welding on delicate or thin metals.
Pipe Cutting and Bevelling Machines
LED Doublesided Portable Light
Simple to use and accurate, these units can cut pipe up to 150mm in diameter and 50mm thick.
Stud Welder
Suitable For
Suited to Building and Construction, Electricians, Plumbing, Refrigeration , Utlities, Railways,
Mining, Camping, Aviation, Military applications.
•Can be operated continuously for 12 hours
•Battery operated
•Can be charged from mains
or 12/24 Volt DC socket
•IP 65 rated Light Head
•LEDs emit little or no heat
•Swivel head adjustable for
60 deg downwards tilt
:Power, Light & Welding
Weight
Open Height
Closed Height
Width
Depth
Voltage
7.7 KG- IN120L
1100
600mm
334mm
220 mm
230-240v & 12v
For further information visit www.coateshire.com.au/products
Oxy Acetylene Kits
Oxy kits are available for cutting or welding and include cutting attachments, welding tips,
hoses, flint lighters, lift-front goggles, combination spanners and oxygen regulators.
Wire Feeders
Wire feeders are ideal for field or construction use, with no control cables required as they are
powered across the arc. The units are portable and are designed for MIG or flux-cored wire feeding.
LED Doublesided portable light SPECIFICATIONS
8
Stud welders can weld mild steel and stainless steel studs to thin-gauge parent metal.
Note: Equipment availability may vary from branch to branch.
Power, Light & Welding : 9
Welding Equipment
Welding Equipment
Professional Range
Electrical Welders – Inverters
Suitable For
These machines are suitable for Workshops, Shutdown and Petro chemical where heavier
section applications require increased duty cycles. Available in AC and DC Tig for welding
Carbon, Stainless Steel and Aluminium. Approximately up to 250-350 amps
Handyman Range
Suitable For
Mainly used for “stick” welding this range is suitable for the home handyman, small workshops
and small construction sites. Using the correct torch, these machines can generally be used for
Tig welding Carbon or Stainless Steel. Approximately up to 140 amps.
Features and Benefits
• Lightweight
• Portable
• Simple
• 10/15 amp input plug
Features and Benefits
• Robust
• Multi functional
• Three phase input plug
• Excellent arc characteristics
• Lightweight
GTAW (tig) electrode & Tungsten selection Chart
MMAW (stick) electrode selection guide
Electrode Size
Current
Av. Plate Thickness
2.5mm
70-105 amps
2.0mm-5.0mm
3.2mm
85-135 amps
5.0mm-10mm
4.0mm
130-180 amps
10mm-16mm
5.0mm
160-270 amps
>16mm
Tungsten
(electrode in torch)
Consumable
(filler wire)
Current
Av. Plate Thickness
1.6mm
1.6mm
90-110 amps
2.0mm
1.6mm-2.4mm
1.6mm
120-150 amps
3.0mm
2.4mm-3.2mm
3.0mm-4.0mm
190-250 amps
5.0mm
3.2mm-4.0mm
3.2mm-5.0mm
220-340 amps
6.0mm
*Data is for use on alloyed steels and may vary for Aluminium welding, settings are a guide only.
*Selection chart may be used for all inverters in range, settings are a guide only.
Contractor Range
Electrical Welders – Transformers
Suitable For
These types of machines are suitable for Workshops, Construction sites, Shutdown and Petro
Chemical sites and are generally used for the professional welders who require increased
duty cycle. They can also be used for “stick” welding Carbon Steel or Stainless Steel. Slightly
more powerful than the Handyman range, they are suitable for repetitive welding operations.
Approximately up to 160-200 amps.
Features and Benefits
• Lightweight
• Portable
• Robust
• 10/15amp input plug
• Excellent arc characteristics
Heavy Fabrication
Suitable For
These are real workhorses of the welding industry and suitable for heavy industrial welding
operations, production welding and large component repair work. They generally require mains
grid power and are normally used for “stick” welding, semi automatic welding and arc air
gouging. Approximately up to 600-750amps
Features and Benefits
GTAW (tig) electrode & Tungsten selection Chart
Tungsten
(electrode in torch)
Consumable
(filler wire)
Current
1.6mm
1.6mm
65-75 amps
0.8mm
1.6mm
1.6mm
85-95 amps
1.0mm
1.6mm
2.0mm
105-115 amps
1.6mm
2.4mm
2.4mm
125-135 amps
2.0mm
• Multi process
• Tough
• Resistant to adverse conditions
• Simple
Gouging carbons amperage guide (Dc only)
Av. Plate Thickness
Electrode Size
4.8mm
6.3mm
8.0mm
9.5mm
12.7mm
15.9mm
19mm
(inch)
3/16
1/4
5/16
3/8
1/2
5/8
3/4
Min amps
150
200
250
350
600
800
1200
Max amps
200
400
450
600
1000
1200
1600
*Use as a guide only, successful gouging operations will also depend on air pressure.
*Data is for use on carbon steel, with pure Argon gas ER70S-6 consumable, fillet and butt joint configuration may slightly vary
settings – may also be used as a guideline for other models. Settings are a guide only.
10 :Power, Light & Welding
For further information visit www.coateshire.com.au/products
Note: Equipment availability may vary from branch to branch.
Power, Light & Welding : 11
Welding Equipment
Welding Equipment
Heavy Contractor Range
Engine Driven Welders
Suitable For
With sustained high performance under the toughest of outdoor conditions, this range is
ideally suited for mine site applications, construction, civil engineering or any high demanding
environment. Approximately up to 575-600 amps.
Light Contractor Range
Suitable For
These small petrol and diesel driven welders are particularly useful on construction sites due
to their mobility and lightweight construction. They are ideal for outdoor light duty, everyday
maintenance and repair work. Approximately up to 240-300 amps.
Features and Benefits
• Engine idler (some models only)
• Lower end amperage control
• Lightweight and simple
Features and Benefits
• Built in voltage reduction device
• Very robust
• Excellent Gouging capability
• High Aux power (12,000 watts)
• Volt/Amp meters
Engine Drive Capability Guide
Engine Drive Capability Guide
Common Processes
Max Diameter
Aux. Equipment Req’d
Cables Req’d
MMAW (Stick)
5.0mm
N/A
Welding and Earth
Common Processes
Max Diameter
Aux. Equipment Req’d
Cables Req’d
MMAW (Stick)
4.0mm
N/A
Welding and Earth
GMAW (Mig)
*1.6mm
Wire Feeder
Welding, Control and Earth
FCAW (Flux Cored)
3.0mm
Wire Feeder
Welding, Control and Earth
Gouging
12.7mm
Gouging Torch
Welding and Earth
GMAW (Mig)
1.2mm
Wire Feeder
Welding, Control and Earth
FCAW (Flux Cored)
1.2mm
Wire Feeder
Welding, Control and Earth
Gouging
4.8mm
Gouging Torch
Welding and Earth
*1.6mm Mig wire is generally the largest available, LN-25 style wire feeders (across the arc) do not require a control cable.
*LN-25 style wire feeders (across the arc) do not require a control cable.
Medium Contractor Range
Welding Accessories
Suitable For
Large construction sites, outdoor industrial applications, structural steelwork, pipelines,
refinery shutdown, and maintenance work. These machines are the hybrid offering of the range,
still light enough for a ute with greater punch than the light contractor range. Approximately
up to 400-500amps.
Features and Benefits
• Suitable for CC and CV processes
• Single phase and Three phase Aux power
• Volt/Amp meter
• Larger consumable capability
• Built in VRD – voltage reduction device
Engine Drive Capability Guide
Common Processes
Max Diameter
Aux. Equipment Req’d
Cables Req’d
MMAW (Stick)
5.0mm
N/A
Welding and Earth
GMAW (Mig)
*1.6mm
Wire Feeder
Welding, Control and Earth
FCAW (Flux Cored)
2.0mm
Wire Feeder
Welding, Control and Earth
Gouging
8.0mm
Gouging Torch
Welding and Earth
Coates Hire provide an extensive range of welding accessories, safety products and consumables:
• 600A Bramco external voltage
reduction device (VRD)
• Air-Arc gouging torch
• Clamps (Dearman – D233)
• Deadman boxes
• Earmuffs
• Electrode oven (large)
• Fume extractors
• Hand-held hot box (portable)
• Handpiece
• Heater C02
• Lead extensions
• Lead sets (positive and negative)
• Miscellaneous welding tool accessories
• Safety glasses
•
•
•
•
•
•
•
•
•
•
•
Stick electrodes
TIG module (high frequency)
TIG set (to suit caddy)
Voltage reducers
Welder remote controllers
Welding gases
Welding gloves
Welding masks
Welding shields
Wire
Wire feeders
*1.6mm Mig wire is generally the largest available, LN-25 style wire feeders (across the arc) do not require a control cable.
12
:Power, Light & Welding
For further information visit www.coateshire.com.au/products
Note: Equipment availability may vary from branch to branch.
Power, Light & Welding : 13
The
right product
EXPERTISE
in the right place,
at the right time.
CONVENIENCE
Industry Experience
Convenient Locations
Over 125 years, the most experienced hire company in Australia.
Over 200 metropolitan and regional branches across Australia.
Engineering Services
24/7 Mobile Support
Comprehensive technical support backed by specialist engineers.
Logistics — Transport Network
Specialised Solutions
Coates Hire has the team and transport infrastructure to ensure reliable, on time delivery of your equipment to any location in Australia.
Account Management
Asset & Resource Management
Training Services
Operational efficiency, particularly in the area of sustainable asset management, is critical to achieving operational excellence.
Partnering with Coates Hire ensures access to our well-established policies, processes, management systems and vast
project experience.
Training Services to ensure that your people are trained, ticketed and up to date on a broad range of equipment.
End-To-End Project Planning
Coates Hire Online — Customer Interface
Vast experience in project planning and end-to-end equipment management solutions.
Coates Hire Online provides instant access to accounts and transactional information.
Remote Operation
Insurance Options — Self insure & Damage Waiver
In partnership with some of our customers, Coates Hire has developed mine-specific remote branches to ensure their needs are
always met.
We offer the option of taking out a Coates Hire damage waiver or of insuring the equipment through your own policies.
Shutdowns
On-Site Facilities
Equipment Tracking & Monitoring — CHASE
Coates Hire offers many years of experience servicing the Industrial Shutdown Market. We offer tailored solutions from 24/7
fully operational facilities to a basic tool store set up.
The benefit of our CHASE System is it allows you to track and manage all of the tools and equipment used on site.
PRODUCT RANGE (QUALITY & QUANTITY)
SAFETY
Mine-Specific Machines
Safety First, Zero Harm
Coates Hire offers an extensive range of specialised mining tools and equipment to meet mining’s exact specifications.
Zero harm means we aim to create a workplace that is injury, illness and incident free. “Nothing is so important that it cannot
be done safely.”
Silver Service Maintenance
All machines, from cement mixers to 25 tonne rollers, are part of the customised Silver Service Program.
Certification
One-Stop-Shop
Coates Hire recently achieved ISO 9001:2008, AS 4801:2001, OSHAS 18001:2007 accreditation.
This certification confirms that Coates Hire’s internal safety and quality systems comply with
Australian and international standards.
Additional Services — Consumables, PPE, Gas
Coates Hire offers a full range of consumables, Personal Protective Equipment, gas and additional services.
Quality
ISO 9001
ENVIRONMENT
Our Commitment
Coates Hire actively participates with government and industry to develop sound policies that will benefit the future of the
environment and all Australians.
Health & Safety
OHSAS 18001