312058.01 8/8 8/9/02 10:00 AM Red •Dot Page 21 ® ® Dry-tite Single Gang Covers Single Gang Device Covers Cat. No. Color Description Silver Device mount Silver Bronze White Silver Bronze White Device mount Device mount Device mount Device mount stay open Device mount stay open Device mount stay open CCDV CCDV-L Silver Silver Device mount Device mount with lock option D-PAK * DCDV DCDV-BR DCDV-WH Silver Bronze White Device mount Device mount Device mount Silver Device mount Silver Bronze White Device mount Device mount Device mount Silver Silver Silver Bronze White Duplex receptacle cover, horizontal CCD Cat. No. Color Description Single Receptacle Cover, vertical - 1.59" Opening Silver CCSV-TL Device mount D-PAK * ® DCCD DCCD-BR DCCD-WH DCCDSO DCCDSO-BR DCCDSO-WH Integral Locking Hasp NEW Motor base plug and cover, horizontal CCMB Silver Device mount 15A-125V motor base plug CCT Silver Device mount switch cover only, packed with spacers and screws CCT-1 CCT-1-20 CCT-2-20 Silver Silver Silver Device mount Device mount with lock option CCT-3 Silver Single pole 15A, 125V Single pole 20A, 120-277V Double pole 20A, 120-277V All with spacers and screws 3-way switch 15A, 125V Device mount Device mount Device mount Single Gang Lampholder Covers Duplex receptacle cover, vertical ® Switch cover only GFCI receptacle cover, horizontal CCG D-PAK * ® DCCG DCCG-BR DCCG-WH Switch cover with switch GFCI receptacle cover, vertical CCGV CCGV-L D-PAK * ® DCGV DCGV-BR DCGV-WH Single receptacle cover, horizontal - 1.485" Diameter Opening CCS Silver Device mount Single receptacle cover, vertical - 1.59" Diameter Opening CCSV CCSV-L Silver Silver CCPO Silver Device mount Device mount with lock option Power outlet cover with 2.156" diameter opening. Box mount. LC-11 Cat. No. Cat. No. Standard (2m" x 4d") LC-11 Jumbo (3a" x 5a") LF11 Size Description d" One hole Device mount. Two holes. Device mount. Three holes. Device mount. LC-21 ___ d" LC-31 LF31 d" Cat. No. Color Size Description DLC-31 Silver d" DLC-31-BR Bronze d" DLC-31-WH White d" Three holes Device mount Three holes Device mount Three holes. Device mount D-PAK * ® LC-21 Single Gang Gaskets Cat. No. Color Description CCK CCSK Black Black Neoprene Neoprene LC-31 NOTE: Raintight when used with appropriate Red•Dot boxes • All covers packed with gasket and screws * See pages 47-49 for complete D-PAK assortment ® ® © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com 21 312058.01 8/8 8/9/02 Red •Dot 10:00 AM Page 18 ® ® Dry-tite Universal Boxes IH3-1-LM 2IH5-1 CCD 2CCTS Applications: • Dry-tite boxes and covers protect wiring devices, switches, electronic components, and terminal blocks in Dry, Damp and Wet Locations. • Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices. • Junction box for branch conduits. ® Securely fastened mounting plates Stainless steel springs Corrosion resistant metal Features/Benefits: • Alloy A380 aluminum, certified zinc alloy, and stainless steel springs provide increased corrosion resistance. • Die cast construction and industrial design combine to produce a rugged protective enclosure for devices on many applications. • Clean cover edges provide good gasket sealing. • Precision cast and machined surfaces permit safer wire pulling. • Clear UL and cubic content markings speed approval by inspectors. • Convenient mounting lugs for a variety of mounting methods. • Securely fastened mounting plates reduce costly call backs. Standard Materials: • Boxes: Die cast aluminum alloy A380. • Cover Plates: Stamped aluminum alloy or certified die cast zinc alloy ZAMAK 3. • Cover Lids: Certified die cast zinc alloy ZAMAK 3. Standard Finish: • Aluminum lacquer finish. Compliances: • • • • • • • Clear marking UL Listed. Boxes: CSA Certified with factory installed ground screw.** Covers: CSA Certified. Covers suitable for use in Wet Locations with covers closed. CCB and CCT series covers suitable for use in Wet Locations. Federal Spec. W-C-586. NEMA 3R Rated. Clean cover edges Precision machined threads Ground screw Sample Specifications: • Universal device boxes and covers shall be of aluminum alloy A380 and certified zinc alloy. All conduit stops shall be free of rough edges. Covers shall have stainless steel springs. Covers shall be finished with aluminum lacquer. Universal device boxes And covers shall be Red•Dot Catalog No. ____________ ® **Consult factory for lead time and minimum quantity. 18 © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com 312058.01 8/8 8/9/02 Red •Dot 10:01 AM Page 24 ® ® Dry-tite Universal Boxes Single Gang Covers CCD CCG CCDV AND CCGV CCS CCT CCSV CCB CCMB Typical FS Mount Hole Pattern Two and Three Gang Covers 2CCSD and 2CCSG 3CCB 2CCT 24 2CCTD 2CCB 2CCS 2CCD & 2CCG 2CCTS 2CCTG-FS Typical FS Mount Hole Pattern © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com