INC
LU
new
S
OD
DE
PR
UC
TS
SIGNALLING DEVICES
ISSUE
8
INTRODUCTION
MOFLASH
:eOFome
to the world of
0oÀash
0oÀash is one of the Oargest indeSendent
manXfaFtXrers of signaOOing deYiFes in the U.
Based in Birmingham at the heart of Great
Britain 0oÀash SignaOOing is one of the
Oargest indeSendent manXfaFtXrers of
signaOOing deYiFes in the U. )ormed from
the 0oÀash ComSan\ Co Ltd in the
FomSan\ has groZn dramatiFaOO\ oYer the
Oast \ears Zith the introdXFtion of a
nXmEer of neZ SrodXFt Oines and Zith the
aFTXisition of signaOOing SrodXFts from
other manXfaFtXrers sXFh as the .Oa[on
range of hooters and horns noZ
SrodXFed in the MoÀash faFtor\
The FomSan\ SrodXFes the foOOoZing t\Ses
of deYiFes InFandesFent BeaFons Eoth
Àashing and statiF LED and ;enon BeaFons
as ZeOO as the traditionaO Rotating BeaFons
for ZhiFh MoÀash is ZorOd famoXs On the
aFoXstiF side of the EXsiness the FomSan\
offers BX]]ers +ooters inFOXding the iFoniF
.Oa[et and ES BeOOs EOeFtroniF SoXnders
Air +orns and 3ie]o deYiFes for the foOOoZing
marNets shoZn on the right
0RÁDVK0DUNHWV
IndXstriaO SignaOOing
3roFess ControO
StatXs IndiFation
)ire and SeFXrit\
+a]ardoXs LoFation
OEstrXFtion 0arNing
0oÀash serYes a diYerse range of FXstomers from eOeFtriFaO ZhoOesaOersFontraFtors to gOoEaO
distriEXtion organisations originaO eTXiSment manXfaFtXrers and a Yariet\ of end Xsers sXFh as
mining manXfaFtXring eOeFtriFaO and gas XtiOities to name EXt a feZ
:ith its Srogramme of deYeOoSment 0oÀash is in a strong Sosition to NeeS meeting the
inFreasing demands of a safet\ FonsFioXs ZorOd :ith a dediFated team Eased in the U. and
throXgh the e[FeOOent reOationshiSs Yia OoFaO distriEXtors and Sartners 0oÀash Fan sXFFessfXOO\
Sromote and seOO its SrodXFt range to oYer FoXntries ZorOdZide
OXr SrodXFts are aOZa\s aYaiOaEOe to meet the FXstomer¶s needs 0oÀash Fan modif\ or design
a EeaFon to \oXr sSeFi¿F needs If oXr standard SrodXFts are oXtside the sFoSe of \oXr SroMeFt
SOease sSeaN Zith oXr teFhniFaO deSartment to see if Ze Fan heOS or emaiO \oXr reTXirements
Yia oXr FontaFt Sage on the 0oÀash ZeEsite ZZZmoÀashFom AOO SroMeFts ZiOO Ee Fonsidered
on their FommerFiaO YiaEiOit\
And ¿naOO\ oXr Fommitment to TXaOit\ and serYiFe FontinXes toda\ as it did Zhen Ze formed
\ears ago it XnderSins oXr foFXs and Sassion for oXr indXstr\
:e EeOieYe the fXtXre ma\ Ee eYen Erighter
Marine
AXtomotiYe
Safet\ and 3roteFtion
FM 558977
&217(176
6HOHFWLRQ$SSOLFDWLRQ
3DJH
P EnYironmentaO )aFtors ! T\Ses of BeaFons ! LeYeOs of Brightness!
Lens CoOoXr! AXdiEiOit\ ! InstaOOation ! MarNs DireFtiYes ! I3 Ratings ! IFon Legends
)ODVKLQJ)LODPHQW%HDFRQ5DQJH
P 8
)) ! ))ES ! )) DIN))A ! )) ! ))
6WDWLF)LODPHQW%HDFRQ5DQJH
P S) ! S) DINS)A ! S) ! S) DIN
/('%HDFRQ5DQJH
P LED8 ! LEDDLEDA ! LED ! LED ! LED TLM StatiF ToZer Lights !
LED E)Oare 3ortaEOe ! LEDA TriFoOoXr SSeFtrXm ! LEDA TriFoOoXr
5RWDWLQJ%HDFRQ5DQJH
P 8
R ! RA ! R
;HQRQ%HDFRQ5DQJH
P ;8 ! ; ! ; ES ! ; DIN ! ;A ! ; ! ; ! ; ! ;SDS !
; ! ;
([SORVLRQ3URRI5DQJH
P E; E)Oare 3ortaEOe ! EDB ! E; ! E; ! E; ! IntrinsiFaOO\ Safe SoXnder ComEination !
EAE AXdiEOe SoXnders ! E;AE BeaFon SoXnders
2EVWDFOH0DUNLQJ/LJKW5DQJH,&$2$SSURYHG
P OEstaFOe MarNing CandeOa ! ))8 CandeOa ! CandeOa ! CandeOa ! LED $XWRPRWLYH%HDFRQ5DQJH
P R88 ! ;88
$FRXVWLF5DQJH
P 3ie]o BX]]ers ! MeFhaniFaO IndXstriaO BX]]ers ! EOeFtroniF SoXnders ! BeOOs ! Sirens !
AB+)8 BX]]ers ! AdaStahorns ! IndXstriaO +ooters ! Airhorns ! .Oa[et ! BeOOs
$FFHVVRULHV5DQJH
:aOO BraFNets ! Cage GXards ! 3iSe BraFNets !
Anti ViEration MoXnts ! Domes
P SELECTION APPLICATION
MOFLASH
6HOHFWLRQ$SSOLFDWLRQ
9LVXDO:DUQLQJ6LJQDOV
The enYironment in ZhiFh the EeaFon is to Ee instaOOed ZiOO determine
the SrodXFt t\Se and Oight intensit\ that is reTXired for an\ aSSOiFation
ThXs a EeaFon designed for IndXstriaO Xse inForSorating a Yer\ high
Oight oXtSXt ZoXOd not Ee sXitaEOe for OoFaO signaOOing at a FontroO SaneO
AOternatiYeO\ a OoZ Oight oXtSXt EeaFon ZoXOd Ee ineffeFtiYe for Oarge
faFtor\ enYironment
GeneraOO\ MoÀash Fan sXSSO\ EeaFons for aOO t\Ses of aSSOiFations
Listed EeOoZ are some of the main marNet areas
$XWRPRWLYH
:arning EeaFons for Xse on aXtomoEiOes FommerFiaO SriYate
agriFXOtXraO off road YehiFOes and forNOift trXFNs etF
)or fXrther information see oXr AXtomotiYe seFtion
,QGXVWULDO0DULQH
:arning EeaFons for heaY\ dXt\ high Oight oXtSXt aSSOiFations sXFh as
foXndries faFtor\ shoSÀoors Oarge ZarehoXses doFNs Sorts and
generaO offshore Xse etF
)or fXrther information see oXr IndXstriaO Marine seFtion
)LUH6HFXULW\
:arning EeaFons for Oight dXt\ OoZ to mediXm Oight oXtSXt to giYe OoFaO
indiFation sXFh as of¿Fes hosSitaOs and sFhooOs
)or fXrther information see oXr )ire SeFXrit\ seFtion
([SORVLRQ3URRI
:arning EeaFons for Xse in SotentiaOO\ e[SOosiYe enYironments sXFh
as oiO rigs re¿neries and mines etF
)or fXrther information see oXr +a]ardoXs Areas seFtion
(QYLURQPHQWDO)DFWRUV
GHWHUPLQLQJ6HOHFWLRQ
z
Safe atmosShere or SotentiaOO\ e[SOosiYe atmosShere
z
The amEient OeYeO of e[isting Oight
z
The Oight oXtSXt reTXired from the EeaFon
z
The dXration the EeaFon has to oSerate
z
The IP rating of the EeaFon
z
The eOeFtriFaO sXSSO\ aYaiOaEOe
7\SHVRI9LVXDO:DUQLQJ%HDFRQV$YDLODEOH
MoÀash manXfaFtXres ¿Ye different t\Ses of VisXaO :arning EeaFons
5RWDWLQJ%HDFRQV¶5·
A SaraEoOiF reÀeFtor driYen E\ an eOeFtriF motor reYoOYes aroXnd a
FontinXoXsO\ iOOXminated EXOE on the YertiFaO a[is of the EeaFon
Freating a SoZerfXO Eeam of Oight traYeOOing throXgh degrees
These Xnits are aYaiOaEOe Zith either a ¿Oament or a tXngsten haOogen
EXOE In generaO this t\Se of EeaFon has a greater degree of Oight
oXtSXt than other modeOs EXt this is redXFed as the SaraEoOiF
reÀeFtor onO\ iOOXminates one giYen Soint at a time
)ODVKLQJ)LODPHQW¶))·
OSerating throXgh an internaO FirFXit ZhiFh simSO\ F\FOes the EXOE On
and Off These t\Se of EeaFons generaOO\ giYe a mXFh OoZer Oight
oXtSXt as it taNes Oonger for the EXOE to fXOO\ iOOXminate itseOf These
Xnits are aYaiOaEOe Zith either a ¿Oament or tXngsten haOogen EXOE The
Oight oXtSXt Fan Ee imSroYed E\ the Xse of a DioStriF )resnaO Oens
ZhiFh is SOaFed oYer the EXOE FaStXring the Oight emitted magnif\ing
and direFting it to inFrease the Erightness of the YisXaO signaO In terms
of Oight FoYerage this t\Se of EeaFon is more ef¿Fient as it iOOXminates
the ZhoOe sXrfaFe of the EeaFon FonstantO\ throXgh degrees
6WDWLF)LODPHQW&RQWLQXRXV%HDFRQV¶6)·
These Xnits are identiFaO to )Oashing )iOament EeaFons Zith the
e[FeStion that the\ do not oSerate throXgh an On and Off F\FOe
:hen the Xnit is energised the Oight soXrFe sta\s SermanentO\ µOn¶
The main adYantage of this t\Se of EeaFon is that the Oight Fan Ee
FontroOOed E\ a seSarate soXrFe ie a FontroO SaneO giYing the Xnit
more Àe[iEiOit\ These Xnits are aYaiOaEOe Zith either a ¿Oament
or tXngsten haOogen EXOE
;HQRQ6WUREH%HDFRQV¶;·
A disFharge FaSaFitor oSerating throXgh a FonYerter FirFXit ignites
[enon gas inside a tXEe Freating a EriOOiant Àash of Oight ;enon gas
ignites YirtXaOO\ instantaneoXsO\ so ma[imXm Erightness is oEtained
immediateO\ This signaO Fan Ee imSroYed fXrther E\ the Xse of a
DioStriF )resnaO Oens as desFriEed earOier In some MoÀash modeOs
a µDoXEOe )Oash¶ oStion is aOso aYaiOaEOe ZhiFh e[tends the signaO
dXration maNing it more notiFeaEOe to the hXman e\e
see ;88 ; ; ;
;enons haYe an added adYantage of OoZ FXrrent FonsXmStion
FomEined Zith Oong Oife The tXEe Oife of a [enon EeaFon is
aSSro[imateO\ miOOion Àashes These Xnits are the most ef¿Fient
aYaiOaEOe inForSorating a degree Oight oXtSXt Zith the Erightest
and most effeFtiYe YisXaO signaO
SELECTION APPLICATION
MOFLASH
/('%HDFRQV¶/('·
A Oight emitting diode LED is a semiFondXFtor deYiFe that emits
YisiEOe Oight Zhen an eOeFtriF FXrrent Sasses throXgh it The foXr maMor
Eene¿ts of LED teFhnoOog\ inForSorated into Zarning EeaFons are
$XGLELOLW\
SimSO\ SrodXFing an aXdiEOe soXnd Zhen the EeaFon is iOOXminated
This is of SartiFXOar Xse in OoZ OeYeO nois\ enYironments if the Zarning
Oight is oEsFXred from direFt YieZing or as a EaFNXS Zarning shoXOd
the EXOE faiO
z
/RZSRZHUUHTXLUHPHQW
+LJKHIÀFLHQF\
z
9HU\ORQJOLIH
z
0XOWLSOH&RORXU6LJQDORSWLRQVLQDVLQJOHEHDFRQHQFORVXUH
z
MoÀash offer a range of LED oStions from EeaFons Fontaining 8 off
LEDs XS to off LEDs in a singOe enFOosXre The\ Fan Ee set in
YarioXs modes of oSeration from )ODVKLQJ6WDWLFDQG5RWDWLQJ
Some EeaFons haYe a FomEined $XGLEOH9LVXDO oStion (WKHUQHW
FomSatiEOe and 3/& FontroOOaEOe EeaFons aOso maNe XS the range
aOong Zith high µIngress ProteFtion¶ enFOosXres
/HYHOVRI%ULJKWQHVV
Brightness deSends XSon the t\Se of EeaFon Fhosen the rated SoZer
oXtSXt of the Xnit ie :atts and -oXOes the distanFe that the signaO is
oEserYed from and the dome FoOoXr of the EeaFon Xsed In generaO if
the YieZing distanFe is doXEOed the Oight intensit\ oEserYed is redXFed
to a TXarter and if the distanFe is TXadrXSOed the Oight intensit\ is
redXFed to a si[teenth
,QVWDOODWLRQDQG0DLQWHQDQFHRI
9LVXDO:DUQLQJ%HDFRQV
z
:hen instaOOing a +a]ard :arning BeaFon Fare shoXOd Ee taNen to
Sosition it in the most effeFtiYe OoFation to aOOoZ for aOO roXnd Oight
YisiEiOit\ and to maintain the IP Ingress ProteFtion rating of the
EeaFon Therefore the foOOoZing Sarameters shoXOd Ee noted
z
To maintain the IP rating the EeaFon shoXOd Ee moXnted Zith the
dome aEoYe the EOaFN moXOded Ease NeYer moXnt the Xnit Zith the
dome hori]ontaO or EeOoZ Ease Sosition
z
AOZa\s ¿t moXnting gasNet SroYided series
modeOs onO\ and ensXre the µO¶ ring is in SOaFe EetZeen the dome
and Ease
z
)it a sXitaEO\ IP rated FaEOe gOand not sXSSOied Zhere aSSroSriate
z
RegXOarO\ FOean the EeaFon dome as this ZiOO imSroYe Oight oXtSXt and
heOS dissiSate heat EXiOd XS in the EeaFon Do not FOean dome Zith
SetroOeXm Eased FOeaners
z
Areas of YiEration shoXOd Ee aYoided If this is not SossiEOe then oXr
AntiViEration moXnt mXst Ee Xsed ReferenFe 8 aYaiOaEOe for
88 series modeOs onO\
z
AYoid sitXation ;enon EeaFons in FOose Sro[imit\ to FommXniFation
aeriaOs or eTXiSment and SoZer Oines that ma\ Ee sXEMeFt to high
YoOtage transients
z
DC YoOtage ;enon EeaFons shoXOd onO\ Ee rXn on a smoothed
reFti¿ed sXSSO\
z
UnOiNe InFandesFent OamSs ZhiFh faiO instantO\ ;enon tXEes
deteriorate Yer\ sOoZO\ The imSending faiOXre of the tXEe ZiOO Ee
indiFated E\ erratiF Àashing OnFe this is reFognised the tXEes
shoXOd Ee reSOaFed immediateO\ )aiOXre to do so ma\ resXOt in
damage to the eOeFtriFaO FirFXit
z
AOZa\s disFonneFt the EeaFon from the sXSSO\ Eefore attemSting
maintenanFe In addition aOOoZ ;enon EeaFons at Oeast minXtes
to seOfdisFharge Eefore remoYing the dome as high YoOtages ZiOO
remain on the SFE for this Seriod of time
%HDFRQ/HQV&RORXUV
The intensit\ of the Oight Fan Ee greatO\ redXFed as it Sasses
throXgh the dome of the EeaFon The e[tent of this redXFtion
is deSendent XSon
z
z
The t\Se of Oight soXrFe Xsed ie FonYentionaO ¿Oament
InFandesFent EXOE tXngsten haOogen EXOE or a [enon tXEe
The FoOoXr of the EeaFon Oens that is Xsed
The taEOe EeOoZ giYes an indiFation of the SerFentage of Oight that
ZiOO Sass throXgh the EeaFon dome for different Oight soXrFes and
dome FoOoXrs
&2/285
),/$0(17
+$/2*(1
;(121
&OHDU
100%
100%
100%
$PEHU
70%
70%
70%
5HG
30%
27%
23%
*UHHQ
12%
15%
25%
%OXH
8%
10%
13%
Different dome FoOoXr Xsed to FonYe\ different
messages to the oEserYer
5('
$0%(5
*5((1
%/8(
SerioXs danger aFt noZ
:arning SroFeed Zith Fare
O. SroFeed as normaO
SSeFi¿F SroFess notiFeZarning
AOternatiYeO\ Green FoOoXr EeaFons are Xsed E\ DoFtors and
Veteriniarns and BOXe EeaFons for the PoOiFe and )ire deSartments
SELECTION APPLICATION
MOFLASH
7KH&(0DUN
The MoÀash SrodXFts that shoZ the CE marN are deemed to FomSO\
Zhere aSSOiFaEOe Zith the EMC DireFtiYe No 8EEC and
additionaO amendments regarding EOeFtromagnetiF ComSatiEiOit\
ZhiFh states that µAn eOeFtriFaO SrodXFt mXst not Ee sXsFeStiEOe to
or generate Fertain OeYeOs of eOeFtromagnetiF interferenFe OiaEOe to
interfere Zith other eOeFtroniF eTXiSment¶ and the LVD DireFtiYe No
EC regarding OoZ YoOtage eOeFtriFaO materiaO ZhiFh states that
µEOeFtriFaO eTXiSment Zithin the YoOtage ranges of to Y AF
and to Y DF are FonstrXFted Zithin the SrinFiSOes of good
engineering SraFtiFe and SroYide adeTXate OeYeOs of SroteFtion
against an eOeFtriF shoFN¶
7KH0DFKLQHU\'LUHFWLYH(&
These direFtiYes are designed to harmonise Zide range heaOth and
safet\ reTXirements in maFhiner\ design and daiO\ Xse E\ indiFating
a SotentiaO ha]ard E\ the Xse of an immediateO\ reFognisaEOe
reFognisaEOe aXdiEOe or YisXaO Zarning signaO
SU(16DIHW\RI0DFKLQHU\
9LVXDO:DUQLQJ6LJQDOV
COassi¿es the t\Se of Zarning Oight and sSeFi¿es the FharaFteristiFs the
Zarning Oight mXst aFhieYe to Fonform to the maFhine direFtiYe
:DUQLQJ6LJQDOV
VisXaO Zarning signaOs mXst Ee at Oeast ¿Ye times Erighter than the
area Zhere the\ are Xsed
'DQJHU6LJQDOV
COearO\ YisiEOe eYen in strong Oight distingXishaEOe from other Oights
and VisXaO Zarning signaOs and Ee Xnderstood immediateO\
(PHUJHQF\6LJQDOV
These haYe the highest Sriorit\ and mXst Ee at Oeast ten times Erighter
than the area that the\ are to Ee Xsed in and Xnderstood immediateO\
,(&&RORXUVRI/XPLQRXV,QGLFDWRUV
3XVK%XWWRQV
EstaEOishes the YarioXs meanings of FoOoXred OXminoXs indiFators
and SXsh EXttons to Fonform to the maFhine direFtiYe
&RORXU 5('
DANGER ACT NO:
z
Danger of OiYe or XngXarded
z
MoYing maFhiner\ or essentiaO
z
ETXiSment in SroteFted ]one
&RORXU$0%(5
:ARNING PROCEED :IT+ CARE
z
TemSeratXre of SressXre different from normaO OeYeO
&RORXU *5((1
SA)ET< PRECAUTION GO A+EAD
z
CheFNs FomSOete the maFhine is aEoXt to start
&RORXU %/8(
SPECI)IC MEANING GIVEN DEPENDING ON SITUATION
z
Preset read\ or remote FontroO
&RORXU
NO SPECI)IC MEANING
z
CoXOd Fon¿rm an earOier message
AOO MoÀash FoOoXred domes are manXfaFtXred from µUV¶ staEOe
SoO\FarEonate SOastiF that ZiOO not tarnish fade or EeFome ErittOe oYer
a Seriod of time XnOiNe man\ domes aYaiOaEOe that are SrodXFed from
AFr\OiF SOastiF
+D]DUGRXV$UHDVWR0HHW$7(;$SSURYDO
The risN of an e[SOosiYe asmosShere Eeing formed is oEYioXsO\ a
YariaEOe faFtor Eeing deSendent XSon the Fonditions in a giYen
enYironment ThXs in order to aFhieYe a Fonsistent OeYeO of safet\
ha]ardoXs areas are FOassi¿ed into three ]ones
=RQH
A ]one in ZhiFh an e[SOosiYe atmosShere is FonstantO\ Sresent or
Sresent for Oong Seriods
=RQH
A ]one in ZhiFh an e[SOosiYe atmosShere is OiNeO\ to oFFXr in
normaO oSeration
=RQH
A ]one in ZhiFh an e[SOosiYe atmosShere is not OiNeO\ to oFFXr in
normaO oSeration and if it oFFXrs it ZiOO e[ist onO\ for a short time
SELECTION APPLICATION
MOFLASH
$SSDUDWXV*URXSV*DV*URXSV
0D[LPXP6XUIDFH7HPSHUDWXUH
ASSaratXs for Xse in har]ardoXs areas is Zhere aSSroSriate groXSed
in one of foXr sXEgroXSs nameO\ I IIA IIB IIC ASSaratXs
SXEGroXSing is normaOO\ aSSOied to )OameSroof and IntrinsiFaOO\ safe
t\Ses of SroteFtion Other t\Ses of SroteFtion aSSO\ eTXaOO\ to aOO
gases sXEMeFt onO\ to temSeratXre FOassi¿Fation
A gasair mi[tXre Fan ignite Zhen it Fomes into FontaFt Zith e[FessiYeO\
hot sXrfaFe The sXrfaFe temSeratXre at ZhiFh eTXiSment oSerates is
therefore of FrXFiaO imSortanFe The eTXiSment is temSeratXre FOassi¿ed
as foOOoZs
The foOOoZing taEOe shoZs the reOationshiS EetZeen the aSSaratXs
groXS and the ReSresentatiYe gas
&ODVV
$SSDUDWXV*URXS
5HSUHVHQWDWLYH*DV
I Mining
Methane
IIA
ProSane
IIB
Eth\Oene
IIC
+\drogen
Ma[ SXrfaFe
7
7
7
7
7
7
C
C
C
C
C
8C
TemSeratXre in Centigade
1RWHThe aEoYe information is intended as a gXide onO\ The seOeFtion of +a]ardoXs area eTXiSment
shoXOd onO\ Ee XndertaNen E\ a sXitaEOe TXaOi¿ed Engineer and instaOOed aFFording to the reOeYant standards
,35DWLQJV
The IP µIngress ProteFtion¶ rating s\stem SroYides a means of FOassif\ing the Degrees of SroteFtion from dXst and Zater afforded E\ eOeFtriFaO eTXiSment
and enFOosXres The s\stem is reFognised in most FoXntries and is set oXt in BS EN Degrees of ProteFtion
6HFRQG1XPEHU
)LUVW1XPEHU
ProteFtion Against /LTXLGV
ProteFtion Against 6ROLGV
,3
,3
7HVW
0
No SroteFtion
0
No SroteFtion
1
ProteFtion against soOid oEMeFts oYer
mm eg aFFidentaO toXFh E\ hands
1
ProteFtion against YertiFaOO\
faOOing droSs of Zater
2
ProteFtion against soOid oEMeFts oYer
mm eg ¿ngers
2
ProteFtion against direFt sSra\s of
Zater XS to from the YertiFaO
3
ProteFtion against soOid oEMeFts oYer
mm tooOs Zires
3
ProteFtion against sSra\s
from the YertiFaO
ProteFtion against soOid oEMeFts oYer
mm tooOs Zires smaOO Zires
ProteFtion against Zater sSra\ed from
aOO direFtions Oimited Ingress Sermitted
5
ProteFtion against dXst
Oimited Ingress no harmfXO deSosit
5
ProteFtion against OoZ SressXre Mets
of Zater sSra\ed from aOO direFtions
Oimited Ingress Sermitted
TotaOO\ SroteFted against dXst
ProteFtion against strong SressXre
Mets of Zater eg for Xse on shiSdeFNs
Oimited Ingress Sermitted
7
8
N
7HVW
15cm min
1m
15cm min
1m
ProteFtion against the effeFts of
temSorar\ immersion EetZeen Fm
and m DXration of test minXtes
ProteFtion against Oong Seriods of
immersion Xnder SressXre
ProteFtion againsts strong SressXres Mets of Zater
8 Ear at a temSeratXre of 8C for dXrations
of seFonds SimXOating SressXre FOeaning
Fonditions on a SOan Àoor )ood IndXstr\ etF
SELECTION APPLICATION
MOFLASH
%X]]HUV
%HOOV
Either EOeFtro MeFhaniFaO t\Se Zhere the diaShragm is deÀeFted E\ a
moYing magnet ZhiFh is triggered E\ a maNe and EreaN FontaFtor or the
Pie]o t\Se Zhere the diaShragm is FontroOOed E\ an eOeFtroniF FirFXit
The MeFhaniFaO Yersions offer mediXmhigh dB oXtSXt Zith OoZ freTXenF\
soXnd and are of roEXst FonstrXFtion
BeOOs are a Fost effeFtiYe traditionaO signaOOing deYiFe Zith a Zide range of
signaOOing aSSOiFations The\ offer mediXm dB oXtSXt Zith a XniTXe soXnd
MoÀash offers tZo t\Ses soOenoid driYen for indXstriaO aSSOiFations Zhere
the\ are Xnder Fonstant daiO\ Xse and a motor driYen t\Se more sXitaEOe
for ¿re aOarm aSSOiFations
Pie]o Yersions are reOatiYeO\ OoZ dB and high freTXenF\ and are onO\
sXitaEOe for OoFaO signaOOing aSSOiFations
+RRWHUV
+ooters are SoZerfXO motor driYen horns SrodXFing the XniTXe and neYer
forgotten µ.Oa[on¶ soXnd Xsed the ZorOd oYer A serated rotor driYen
against a hardened steeO diaShragm stXd Freates a high dB oXtSXt Ztih
OoZ freTXenF\ soXnd These t\Ses of signaOs are ideaO for indoor and
oXtdoor aSSOiFations Zhere a rXgged and dXraEOe soXnder is reTXired
(OHFWURQLF6RXQGHUV
The EOeFtroniF SoXnder is a YersatiOe aFoXstiF signaO inForSorating 8
indiYidXaO tones It inForSorates a mediXm dB oXtSXt Zith a distinFtiYe
mXOtitone freTXenF\ oStion to indiFate YarioXs SroFesses a seFond one
Fan Ee remoteO\ sZitFhed Yia a third Zire
This t\Se of signaO is sXitaEOe for ¿re aOarm Xse and Fonforms to
the FXrrent EC regXOations
$LUKRUQV
Airhorns are noneOeFtriFaO deYiFes that onO\ oSerate from a FomSressed
air sXSSO\ The\ offer Yer\ high dB oXtSXt Zith Yer\ OoZ freTXenF\ soXnd
maNing them ideaO for Yer\ nois\ enYironments MoÀash offers an
indXstriaO and marine range Being noneOeFtriFaO the\ Fan Ee Xsed in
ha]ardoXs area Categor\ Xse
P
G%$
1
70
75
80
85
90
92
98
100
102
108
110
112
118
120
122
128
130
2
59
79
88
90
92
98
100
102
108
110
112
118
120
122
3
55
70
75
80
82
88
90
92
98
100
102
108
110
112
118
120
5
51
71
78
80
82
88
90
92
98
100
102
108
110
112
10
50
55
70
72
78
80
82
88
90
92
98
100
102
108
110
20
39
59
70
72
78
80
82
88
90
92
98
100
102
30
35
50
55
70
72
78
80
82
88
90
92
98
100
50
=
51
58
70
72
78
80
82
88
90
92
=
=
50
52
58
70
72
78
80
82
88
90
=
39
50
52
58
70
72
78
80
82
=
50
52
58
70
72
78
80
=
38
50
52
58
70
72
=
=
=
38
50
52
58
70
=
=
=
38
50
52
58
=
=
38
50
52
58
=
=
38
50
52
100
200
300
500
1000
2000
3000
5000
/HQV&RORXUV
01
02
03
05
$PEHU
$PEDU
*HOE
-DXQH
$UDQFLR
5HG
5RMR
5RW
5RXJH
5RVVR
%OXH
$]XO
%ODX
%OHX
%OX
*UHHQ
9HUGH
*UXQ
9HUW
9HUGH
&OHDU
7UDQVSDUHQWH
.ODU'XUFKVLFKWLJ
7UDQVSDUHQW
,QFRORUH
SELECTION APPLICATION
MOFLASH
,FRQ/HJHQGV
)Oashes SimSOes o DoEOes
Sor minXto MXestra TXe
Oa Xnidad tiene Xna oSFion
de doEOe Àash
EinfaFher oder
DoSSeOEOit] Sro minXte
=eight oE das
gerat die
DoSSeOEOit]fXnNtion hat
SignaX[ FOignotants
simSOes oX doXEOes Sar
minXte IndigXe TXe
O¶Xnite est eTXiSee d¶Xne
oStion de signaO FOignotant
doXEOe
)Oash singoOi o doSSie
aO minXte IndiFa Fhe iO
disSositiYo SXo fornire
Àash doSSi
ReYoOXtions Ser minXte
ReYoOXFiones Sor minXto
UmdrehXngen Sro minXte
ToXrs minXte
Giri aO minXto
,3 Ingress ProteFtion of
the Xnit
Grado de SroteFFion IP
EinErXFhsFhXt]
ProteFtion de O¶Xnite
IndiFe di Srote]ione
deO disSositiYo
& OSerating TemSeratXre in
Centigrade
TemSeratXra de
fXnFionamiento
ArEeitstemSeratXr des
gerates
TemSeratXres de serYiFe
O¶Xnite
TemSeratXra di
fXn]ionamento in
gradi Fentigadi
Bo[ed Zeight inFOXding
the Dome
Peso emSaTXetado
inFOXida Oa FXSXOa
VerSaFNXngsgeZiFht
einsFhOieEOiFh haXEe
Poids Fonditionne \
FomSris Sartie
sXSerieXre
Peso insFatoOato Fon
FaOotta
+]
OSerates on a freTXenF\
of +] AF
)XnFiona a Xna
freFeXnFia de +] AF
ArEeitet Eei +]
ZeFhseOstrom
)onFtionne sXr Xne
)Xn]iona Fon
freTXenFe de +] CA +] in CA
G% )itted Zith AXdiEOe
SoXnder IndiFates
DeFiEeO OeYeO at meter
DisSone de disSositiYo
aFXstiFo IndiFa eO niYeO
de deFiEeOios
a metro
Mit aNXstisFhem signaO
Yersehen GiEt OaXtstarNe
in dB in m entfernXng an
ETXiSe d¶Xm signaO
sonore IndiTXe Oe niYeaX
de deFiEeO a m
Dotato di segnaOatore
aFXstiFo IndiFa
dB a m
SXitaEOe for Xse in
marine aSSOiFations
UtiO]aEOe en
aSOiFaFiones maritimas
Geeignet fXr
AnZendXngen im
SFhiffs Xnd MarinereiFh
ASSroSrie aX[
aSSOiFations en
miOieX naYaO
Idonei Ser
aSSOiFa]oni naYaOi
SXitaEOe for Xse in ¿re
aOarm s\stems
UtiOi]aEOe en
sistmas de aOarma
anti inFendios
Geeignet fXr
AnZendXngen in
BrandmeOeanOagen
ASSroSrie aX[
instaOOations de
OXtte Fontre Oe feX
Idonei Ser imSianti
antiFendio
SXitaEOe for Xse in
indXstriaO aSSOiFations
VaOido Sara Xso en
aSOiFaFiones
indXstriaOes
Geeignet fXr
indXstrieOOe
AnZendXngen
ConYient aX[
aSSOiFations
indXstrieOOes
Adatto Ser imSiego neO
settore indXstriaOe
SXitaEOe for Xse in
aXtomotiYe aSSOiFations
VaOido Sara Xso en
aSOiFaFiones de
aXtomoFion
Geeignet fXr
AnZendXngen im
AXtomoEiOEereiFh
ConYient aX[
aSSOiFations
aXtomoEiOes
Adatto Ser imSiego
neO settore deOO¶aXto
SXitaEOe for oEstaFOe
marNing aSSOiFations
VaOido Sara Xso en
aSOiFaFiones de
EaOi]amiento
Geeignet fXr +inderniss
EeOeXFhtXng im
LXftfahrtEereiFh
ConYient aX[
aSSOiFations de
marTXage d¶oEstaFOe
Adatto Ser
segnaOa]ione
ostaFoOo aereo
SXitaEOe for eSOosiYe Sroof
aSSOiFations to ATE;
aSSroYaO
VaOido Sara Xso en
aSOiFaFiones en
zonas de riesgo
Fon Ferti¿FaFion ATE;
Geeignet fXr
e[SOosionsgesFhXtzte
AnZendXngen mit ATE; =XOassXngen
ConYient aX[
aSSOiFations
antideÀagrantes
reSondant a Oa
norma ATE;
Adatto Ser imSeigo
in atmosfera
esSOosiYa seFondo
omoOogazione ATE;
)30 )30
530 o
.J to 0$5,1(
),5(
,1'8675,$/
$872027,9(
2%67$&/(
0$5.,1*
(;3/26,21
3522)
SingOe or DoXEOe Àashes
Ser minXte
ShoZs the Xnit has a
doXEOe Àash oStion
08
MOFLASH
HEALTH & SAFETY
INDUSTRIAL
MATERIALS HANDLING
PROCESS CONTROL & STATUS INDICATION
MARINE
FIRE & SECURITY
EXPLOSION PROOF
AUTOMOTIVE
ICAO OBSTACLE MARKING
09
Visual Signals
FLASHING FILAMENT
BEACONS
102mm
138mm
138mm
151mm
ES Version
FF125 Series
Industrial Flashing Filament Beacons >
FF125 Series
Product overview
The FF125 Series operates
through an internal circuit which
simply cycles the lamp On and Off.
These types of beacons generally
give a much lower light output as
it takes longer for the lamp to fully
illuminate itself. These units are
supplied with a ¿lament lamp.
In terms of light coverage, this
type of beacon is more ef¿cient
as it illuminates the whole surface
of the beacon constantly through
360 degrees. The FF125 series
is ideal for low cost, local signal
applications. A screw base
version is also available, see the
ES version which is ideal for easy
or temporary installation due to
the E27 screw base.
25mm
2 x 5mm
knockout
51mm
65mm
FF125 Series
ES Version
Features
Continuously rated
Easy to clean external lens
Suitable for surface or wall
mounting - (except ES Version)
Optional wall bracket &
protective guard available
(except ES Version)
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
FF125-80
FF125-81
FF125-82
FF125-83
12v Dc --24v Dc --115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
Ba15d x 15w
Ba15d x 15w
1.75 A
0.88 A
0.13 A
0.07 A
ES Version
FF125ES-76
FF125ES-77
115v Ac ~
230v Ac ~
Ba15d x 15w
Ba15d x 15w
0.13 A
0.07 A
0.20 FF125
Kg 0.22 ES
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
FPM 60
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
10
162mm
Visual Signals
FLASHING FILAMENT
BEACONS
ø98mm
Optional Piezo
Buzzers
27.6
3 Holes
x ø4.5 on
88 pcd
Industrial Flashing Filament Beacons >
FF125 DIN & FFA125 Series
Product overview
Lead exit
position 5mm max
cable size
11mm
11º Side knockout
position
Features
Continuously rated
Combined audible
& visual signal
Suitable for ¿re, security & light
industrial applications, these
beacons are of the Flashing Mode
type. Once the unit is energised
the lamp will Àash through a
standard cycle of 60 FPM. The
FFA version incorporates two Piezo
sounders situated in the base that
are synchronised to the Àash rate.
An M12 sealing gromet in the
base allows for cable entry and
termination inside the enclosure.
Simple and quick installation
Cage guard option available
- see accessory page
SRLQW¿[
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
FF125-90
FF125-91
FF125-92
FF125-93
12v Dc --24v Dc --115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
Ba15d x 15w
Ba15d x 15w
1.75 A
0.88 A
0.13 A
0.07 A
For Audible Option
FFA125-80
FFA125-81
FFA125-82
FFA125-83
12v Dc --24v Dc --115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
Ba15d x 15w
Ba15d x 15w
1.80 A
0.90 A
0.15 A
0.08 A
Kg 0.25
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
FPM 60
01 02 03 04 05
dB 90
INDUSTRIAL
11
Visual Signals
FLASHING FILAMENT
BEACONS
FF201-84/85 - FF200-86/87
FF201-88/89
Industrial Flashing Filament Beacons >
either a ¿lament or tungsten
FF201/200 Series
Product overview
The FF201/200 Series operates
through an internal circuit which
simply cycles the lamp On and Off.
These types of beacons generally
give a much lower light output as
it takes longer for the lamp to fully
illuminate itself.
These units are available with
halogen lamp. The light output
can be improved by the use of a
Dioptric (Fresnel) or Reeded lens
which is placed over the lamp
capturing the light emitted,
magnifying and directing it to
increase the brightness of the
visual signal. In terms of light
coverage, this type of beacon
is more ef¿cient as it illuminates
the whole surface of the beacon
constantly through 360 degrees.
Features
Continuously rated
Easy to clean external lens
Suitable for use with
conduit BESA box
Suitable for surface
or wall mounting
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
FF201-84
FF201-85
FF201-88
FF201-89
FF200-86
FF200-87
12v Dc --24v Dc --12v Dc --24v Dc --115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
H1 x 55w
H1 x 70w
Ba15d x 15w
Ba15d x 15w
1.75 A
0.88 A
4.70 A
3.00 A
0.13 A
0.07 A
Kg 0.70
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
FPM 60
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
12
Visual Signals
FLASHING FILAMENT
BEACONS
FF401-84/85
FF400-86/87
FF401-88/89
Industrial Flashing Filament Beacons >
FF401-400 Series
Product overview
The FF401/400 Series operates
through an internal circuit which simply
cycles the lamp On and Off. These
types of beacons generally give a
much lower light output as it takes
longer for the lamp to fully illuminate
itself. These units are available with
either a ¿lament or tungsten halogen
lamp. The light output can be improved
by the use of a Dioptric (Fresnel) or
Reeded lens which is placed over the
lamp capturing the light emitted,
magnifying and directing it to increase
the brightness of the visual signal. In
terms of light coverage, this type of
beacon is more ef¿cient as it
illuminates the whole surface of
the beacon constantly through 360
degrees. The 401/400 Series has a
choice of side or bottom cable entries.
Features
Continuously rated
Easy to clean external lens
M20 side entry or
bottom cable entry
Suitable for surface
or wall mounting
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
FF401-84
FF401-85
FF401-88
FF401-89
FF400-86
FF400-87
12v Dc --24v Dc --12v Dc --24v Dc --115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
H1 x 55w
H1 x 70w
E14 x 60w
E14 x 60w
1.75 A
0.88 A
4.70 A
3.00 A
0.55 A
0.29 A
Kg 0.80
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
FPM 60
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
13
Visual Signals
STATIC FILAMENT
BEACONS
102mm
138mm
Industrial Static Filament Beacons >
SF125 Series
2 x 5mm
knockout
51mm
65mm
Features
Continuously rated
Product overview
The SF125 Series is identical to
the Àashing ¿lament beacons with
the exception that they do not
operate through an On and Off
cycle. When the unit is energised,
the light source stays permanently
‘On’ - often referred to as steady
mode. The main advantage of this
type of beacon is that the light can
be controlled by a separate source,
ie a control panel, giving the unit
more Àexibility.
These units are supplied with a
¿lament lamp. The light output is
increased by the use of a reeded
lens. Ideal for local signalling
applications.
Suitable for surface
or wall mounting
Suitable for use with
conduit BESA box
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
SF125-80
SF125-81
SF125-82
SF125-83
12v Ac/Dc --~
24v Ac/Dc --~
115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
Ba15d x 15w
Ba15d x 15w
1.75 A
0.88 A
0.13 A
0.07 A
Kg 0.17
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
INDUSTRIAL
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02 03 04 05
14
162mm
Visual Signals
STATIC FILAMENT
BEACONS
ø98mm
Optional Piezo
Buzzers
27.6
3 Holes
x ø4.5 on
88 pcd
Industrial Static Filament Beacons >
SF125 DIN & SFA125 Series
Lead exit
position 5mm max
cable size
11mm
11º Side knockout
position
Features
Product overview
Suitable for ¿re, security & light
industrial applications, these
beacons are of the Static mode
type. Once the unit is energised
the lamp will stay permanently On
- often referred to as Steady Mode.
The SFA version incorporates two
Piezo sounders situated in the
base that are sychronised to the
Àash rate. An M12 sealing gromet
in the base allows for cable entry
and termination inside the
enclosure. The main advantage
of these units is that the Àash rate
can be controlled by an exterior
source ie a control panel.
Continuously rated
Combined audible
& visual signal
Cage guard option available
- see accessory page
360o visibility
SRLQW¿[
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
SF125-90
SF125-91
SF125-92
SF125-93
12v Dc --24v Dc --115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
Ba15d x 15w
Ba15d x 15w
1.75 A
0.88 A
0.13 A
0.07 A
For Audible Option
SFA125-80
SFA125-81
SFA125-82
SFA125-83
12v Dc --24v Dc --115v Ac ~
230v Ac ~
Ba15d x 21w
Ba15d x 21w
Ba15d x 15w
Ba15d x 15w
1.80 A
0.90 A
0.15 A
0.08 A
Kg 0.25
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
dB 90
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
15
Visual Signals
STATIC FILAMENT
BEACONS
SF200-05/09
SF201-62/63
SF201-26/29
Industrial Static Filament Beacons >
SF201/200 Series
type of beacon is that the light can
Product overview
The SF201/200 Series is identical
to the Àashing ¿lament beacons
with the exception that they do not
operate through an On and Off
cycle. When the unit is energised,
the light source stays permanently
‘On’ - often referred to as steady
mode. The main advantage of this
be controlled by a separate source,
ie a control panel, giving the unit
more Àexibility. These units are
available with either a ¿lament
or tungsten halogen lamp. The
201/200 Series uses a smooth
outer lens. Low wattage models
incorporate a Dioptric Fresnel
internal lens to increase the light
output. The use of the smooth
outer lens makes cleaning of the
unit easy and less likely to become
ineffective due to a build-up of dirt.
Features
Continuously rated
Suitable for use with
conduit BESA box
Suitable for surface
or wall mounting
Low current consumption
models available
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
SF201-26
SF201-27
SF201-28
SF201-29
SF201-62
SF201-63
SF201-05
SF201-06
SF201-07
SF200-08
SF200-09
FL200-09
12v Ac/Dc --~
24v Ac/Dc --~
12v Ac/Dc --~
24v Ac/Dc --~
12v Ac/Dc --~
24v Ac/Dc --~
12v Ac/Dc --~
24v Ac/Dc --~
48v Dc --115v Ac ~
230v Ac ~
230v Ac ~
Ba15d x 5w
Ba15d x 5w
Ba15d x 10w
Ba15d x 10w
H1 x 55w
H1 x 70w
Ba15d x 48w
Ba15d x 48w
Ba15d x 35w
Ba15d x 60w
Ba15d x 60w
E27 x 9w (Fluorescent)
0.42 A
0.21 A
0.84 A
0.42 A
4.60 A
2.90 A
4.00 A
2.00 A
0.65 A
0.55 A
0.29 A
---
Kg 0.76
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
INDUSTRIAL
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02 03 04 05
16
Visual Signals
STATIC FILAMENT
BEACONS
SF401/400-05/09
SF401-62/63
Industrial Static Filament Beacons >
SF401/400 DIN Base Series
Product overview
The SF401/400 DIN Base Series
is identical to the Àashing ¿lament
beacons with the exception that
they do not operate through an On
and Off cycle. When the unit is
energised, the light source stays
permanently ‘On’ - often referred
to as steady mode. The main
advantage of this type of beacon is
that the light can be controlled by a
separate source, ie a control panel,
giving the unit more Àexibility.
These units are available with
either a ¿lament or tungsten
halogen lamp.
The use of a smooth outer lens
makes cleaning of the unit easy
and less likely to become
ineffective due to a build-up of dirt.
The DIN Base Series offers the
installer the option of a three point
¿x using external ¿xing points.
Features
Continuously rated
Suitable for surface mounting
Cage guard option available
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
SF401-62
SF401-63
SF401-05
SF401-06
SF401-07
SF400-08
SF400-09
12v Ac/Dc ~--24v Ac/Dc ~--12v Ac/Dc ~--24v Ac/Dc ~--48v Dc --115v Ac ~
230v Ac ~
H1 x 55w
H1 x 70w
Ba15s x 48w
Ba15s x 48w
Ba15d x 35w
E14 x 60w
E14 x 60w
4.60 A
2.90 A
4.00 A
2.00 A
0.65 A
0.55 A
0.29 A
Kg 0.71
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
INDUSTRIAL
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02 03 04 05
17
Visual Signals
LIGHT EMITTING DIODE
BEACONS
26mm
50mm
ø76mm
M4 x 13mm lg
studs. Nuts and
washers provided
3 Leads x 500mm lg
ø45mm
2 off Snap-fit Optional
Fixing Plates supplied
for Surface mounting
Industrial LED Dual Function >
LED80 Series
55mm
8mm thick
Fixing Plate
wires (Àashing mode) or three (static
mode). The beacons are supplied
fully assembled and ready for
immediate installation.
The unit offers two mounting
options, either Stud Mount or
Surface Mounting using the two
piece ¿xing plate supplied. One
plate is ¿xed to the appropriate
surface the other to the beacon, the
two plates then ‘Snap Fit’ together.
Product overview
The LED80 incorporates 12 ultra
bright Surface Mount LEDs
offering an economic solution
for a wide range of general
signalling solutions.
Ideally suited for local indication the
beacon is controlled by either two
2 x slots
4 x 9mm
Features
LED long life
Continuously rated
Extra bright
Wide operating voltage
180o visibility
Economical
IP67
Material
UV Stable Polycarbonate
Lens and Body
Code No:
Voltage:
Light Source:
Current:
LED80-02
10-100v Dc ---
LED Array
90 mA
200 mA
LED80-04
115/230v Ac ~
Kg 0.14
APPROVED AND
CONFORMITIES
o
LED Array
C -20+55
Flashing
Static
at 24v Dc ---
20 mA
IP 67
FPM 60
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04
FIRE
MARINE
18
162mm
Visual Signals
LIGHT EMITTING DIODE
BEACONS
ø98mm
Optional Piezo
Buzzers
27.6
3 Holes
x ø4.5 on
88 pcd
Industrial LED Multi Functional Beacons >
LEDD & LEDA 125 Series
Product overview
Suitable for ¿re, security &
industrial applications, these
beacons offer three alternative light
mode operations: 1 - Continuously
ON, 2 - Rapid Flash 120 FPM or
3 - Standard Flash 60 FPM, selected
by a dip switch mounted lens side on
the PCB. The LEDA version
incorporates two Piezo sounders
situated in the base and are
synchronised to the light mode.
‘Ac’ units are supplied with one
meter of Àying lead. ‘Dc’ units allow
for termination inside the base
enclosure. An M12 sealing gromet
in the base allows for cable entry.
Piezo’s cannot be controlled
independantly from light.
Lead exit
position 5mm max
cable size
11mm
11º Side knockout
position
Features
LED long life
Continuously rated
Extra bright
Combined audible
& visual signal
Cage guard option
- see accessory page
360o visibility
SRLQW¿[
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
01
LEDD125-02
LEDD125-03
LEDD125-04
02
03
04
24v Dc --115v Ac ~
230v Ac ~
48 LEDs
48 LEDs
48 LEDs
450 mA 250 mA 250 mA 250 mA
155 mA 130 mA 130 mA 130 mA
90 mA 80 mA 80 mA 80 mA
For Audible Option
LEDA125-02
24v Dc --LEDA125-03
115v Ac ~
LEDA125-04
230v Ac ~
48 LEDs
48 LEDs
48 LEDs
450 mA 250 mA 250 mA 250 mA
155 mA 130 mA 130 mA 130 mA
90 mA 80 mA 80 mA 80 mA
0.57 Ac
Kg 0.33 Dc
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -20+45
ADD THE FOLLOWING
LENS CODES TO THE
PRODUCT WHEN
ORDERING
IP 65
01 02 03 04 05
FPM 60/120
INDUSTRIAL
dB 90
FIRE
19
Visual Signals
LIGHT EMITTING DIODE
BEACONS
LED201/200 Series
LED401/400 Series
Industrial LED
Flashing Rotating Static Beacons >
LED201/200 & LED401/400 Series
Features
LED long life
Continuously rated
Suitable for use with conduit
BESA box - LED201/200
Product overview
Suitable for surface
or wall mounting
The LED201/200 and LED401/400
Series incorporates 144, ultra
bright single colour LEDs. These
beacons offer long life, low current
consumption and are virtually
maintenance free. Suitable for ¿re,
security and industrial applications.
Both ranges offer static, Àashing
or rotating options by use of a
jumper switch.
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
SRLQW',1¿[LQJ/('
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
Flashing Rotating Static
LED201/200 Series
LED201-02
24v Dc --LED200-04 z 115/230v Ac ~
LED Array
LED Array
0.05
0.07
0.10 z
0.03 z
0.50 A
0.07 A
LED401/400 Series
LED401-02
24v Dc --LED400-04 z 115/230v Ac ~
LED Array
LED Array
0.05
0.07
0.10 z
0.03 z
0.50 A
0.07 A
Pre-set to 230v Ac ~
z
Ac
Kg 1.0
0.6 Dc
APPROVED AND
CONFORMITIES
2 Bar Rotating
z
50/60 Hz
o
C -20+45
IP 65
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02
FPM 60
INDUSTRIAL
RPM 120
FIRE
20
Visual Signals
LIGHT EMITTING DIODE
BEACONS
Drilling and Fixing
Dimensions
42
48
Terminal Unit
Fixing
118
342 398
286
230
MIN 100 174
ø20
7
ø5
454
Base Fitting
ø70
Traditional LED Static Tower Lights >
Modular TLM Series
ø80
Features
LED long life
Continuously rated
Product overview
Combined audible
& visual option
Ideally suited for status indication,
the TLM Series beacons have
been designed to offer a range of
signalling options that are quick
and easy to install. Once
energised the lamp will stay
permanently ON, often referred
to as a ‘Steady Mode’. The range
offers ¿ve colour modules that are
designed to accommodate a
Ba 15d lamp ¿tting and a modular
audible option that is attached to
the top of the tower. The Mounting
Cap and Base are required for all
installations whereas the Foot and
Pole mount are optional.
Visually, lamp choice
determines voltage
Modular design allows for
ÀH[LELOLW\RIFRQVWUXFWLRQ
and future upgrades
360o visibility
,3
Material
UV Stable Polycarbonate Lens
Code No:
Voltage:
Current:
TLM
n/a
n/a
TLM-BC
Accessories Options
TLM-AUD-24
TLM-AUD-230
TLM-P100
TLM-P150
LED Lamp 50130
LED Lamp 50132
n/a
n/a
24v Ac/Dc --~
230v Ac/Dc --~
n/a
n/a
24v Ac/Dc --~
230v Ac/Dc --~
0.02mA
0.02mA
n/a
n/a
50mA
50mA
Per
Kg 0.35 Module
APPROVED AND
CONFORMITIES
o
C -20+50
Light module Ba15d ¿tting,
maximum 5 Watts
Mounting cap and base
Audible module
Audible module
Mounting foot and 100mm pole
L-shaped mounting bracket
IP 54
dB 90
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
21
Visual Signals
LIGHT EMITTING DIODE
BEACONS
200mm
60mm
E-Flare
LED Portable Beacon Series>
Features
LED long life
Product overview
Low battery indicator
Shock resistent
Suitable for a wide range of
applications the E-Flare beacon
has been designed with versatility
in mind. The unit provides a highly
visible warning zone, day or night.
These beacons are single colour
only and incorporate a failsafe
activation switch to prevent
accidental turn on or off. The units
are powered by two ‘D’ Cell
Alkaline batteries (not supplied)
that will provide at least 40 hours
of peak brightness operation. See
below for the range of accessories
for the E-Flare portable beacon.
Ultra quick installation
Versatile accessory options
KRXUVOLIH
360o visibility
IP66
Material
UV Stable Polycarbonate Lens
UV Stable ABS Body
Code No:
Voltage:
Light Source:
LED-P-F-01
LED-P-F-02
3v Dc --3v Dc ---
8 LEDs
8 LEDs
Accessories
50173
Cone Clip
Kg 0.35
50174
50175
Magnetic Base Flotation Collar
Beacon
APPROVED AND
CONFORMITIES
o
C -20+50
50170
Standard Base
50171
Aviation Base
50172
Magnetic Clip
50176
Suction Cup
50177
Daylight Hood
50178
Carry Bag
IP 66
FPM 160
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02
AUTOMOTIVE
MARINE
22
MOFLASH
SPECTRUM SERIES
TRI-COLOUR LED
SUITABLE FOR USE IN HARSH
ENVIRONMENTAL APPLICATIONS
23
Audible + Visual > Tri-Colour
LED PLC Controllable Beacon
Features
Three colours in one housing
- amber red green
360o visibility
Product overview
The Spectrum 600 Series utilises
ultra-bright, tri-colour LEDs in
one enclosure producing
amber, green and red light in
conjunction with two synchronised
piezo sounders. The beacon is a
cost-effective alternative to
traditional stacking beacons
and other process indication
applications where multiple signal
outputs, long life and low power
consumption are required. The
Spectrum 600 comes totally
assembled and ready for
immediate installation. In addition,
the enclosure incorporates a high
Ingress Protection (IP) rating and
is manufactured from a tough, UV
stable polycarbonate plastic that
makes the beacon suitable for harsh
industrial and marine environments.
The Spectrum 600 requires external
input signals for it to function. If no
PLC (or similar) is available, then the
Spectrum Interface Unit gives the
end user a control option.
LED long life and low power
Combined beacon & piezo
sounders
28 signal options
PLC controllable
Optional interface unit for
non PLC operation
- 7 preset signals
Ethernet compatible
Tough, UV stable
polycarbonate housing
Material
UV Stable Polycarbonate Plastic
Code No:
Voltage:
Light Source:
Current:
Amber
Red/Green
LEDA600-01
24v Dc/230v Ac
Tri-Colour LED
450 mA
265 mA
LEDA600-03
24v Dc/115v Ac
Tri-Colour LED
450 mA
265 mA
50165 Interface
230v Ac ~
50166 Mounting Pole
50004 Right-angled Wall Bracket
Kg 0.85
FPM 60x90
APPROVED AND
CONFORMITIES
APPROVED
AND
CONFORMITIES
50/60 Hz
dB 90
o
C -35+55
INDUSTRIAL
IP 66 67 69k
MARINE
24
Visual Signals
LIGHT EMITTING DIODE
BEACONS
The Control Signal
The Control Signal must consist
of a 5-bit word, which has to be
assembled and transmitted in
parallel mode to the Spectrum
Beacon. The colour, Àash frequency
and sound are independent of
one another but a colour signal is
necessary for the control word to be
accepted, thus any word beginning
with OO will not be accepted.
50165 Interface Unit (optional)
for further information download the Interface Datasheet from the website
The Interface Unit contains seven
electrically isolated prioritised
channels. Each channel accepts
24-230v Ac or 12-48v Dc input.
A pre-selected audio and/or visual
signal is supplied for each of the
seven channels. In the event of no
signal being applied, the beacon
displays continuous green. The
operating voltage for the unit is
230v Ac. The design allows for a
12v Dc auxiliary power supply for
use in volt free applications.
Additionally, the unit incorporates
a battery (not supplied) back-up
suf¿cient to maintain the unit for
12 hours in case of mains failure.
Provision is made for mains failure
to be signalled from the interface
unit (device not supplied). The
unit is supplied complete with
mounting plate and cover. This
can be installed either inside an
existing enclosure or into a standard
weatherproof ‘Fibox’ IP67 mounting
box (ref: MNX PCM200/63 G).
Technical Speci¿cation
Type:
LEDA600-01
LEDA600-03
Light Source:
Ultra-bright Tri-colour LEDs
Amber
3.9 Effective Candela (390 mcd) 450mA
Green
6.2 Effective Candela (620 mcd) 265mA
Red
4.4 Effective Candela (440 mcd) 265mA
Signal Options:
Continuous
Slow Flash
Rapid Flash 1
Rapid Flash 2
Sounder Type:
Electronic Piezo Sounders x 2:
20mA
dB@1m
90dB +3dB (horn covers not installed)
Frequency
3.1Hz +500Hz
Visual and audible signalling options can be combined audible signal sychronised with beacon Àash.
Operating Temp:
-350C to 550C
Enclosure Material:
UV Stable Polycarbonate Plastic
The beacon has three mounting options:
Ingress Protection:
IP65 & IP67 as standard as one enclosure.
IP66 with sounder covers ¿tted. Sounder covers can be ¿tted
(snap-¿xed) or permanently (adhered) into place.
Sounder covers supplied as standard.
Surface Mount Plate
(3 point DIN ¿x) ¿tted as standard.
Side knockouts x 2 cabling in/out
(15mm x 10mm).
Beacon Control:
The beacon is supplied with Àying leads 2 x 1 metre.
4 core power cables and 6 core signal cables.
APPROVED AND
CONFORMITIES
24v Dc or 230v Ac
24v Dc or 115v Ac
On
60 fpm
90 fpm (0.11sec ON, 0.23sec OFF)
90 fpm (0.23sec ON, 0.11sec OFF)
Weight:
0.85kg
For further information download the Technical Datasheet from the website.
Mounting Options:
Foot and Pole Mount (50166)
Right Angled Wall Bracket (50004)
25
Visual Signals
LIGHT EMITTING DIODE
BEACONS
27.6
162mm
3 Holes
x ø4.5 on
88 pcd
Lead exit
position 5mm max
cable size
ø98mm
LED Tri-Colour Visual & Audible Beacon >
LEDA125-01 PLC Controllable Series
Product overview
This beacon type offers maximum
Àexibility in terms of visual and
audible requirements. The beacon
can produce 3 colours, Amber,
Green and Red in conjunction
with an audible signal. Two piezo
sounders situated in the base of
the unit can be synchronised with
any colour and Àash rate required.
The unit requires PLC control to
function. Ideally suited to status
control the beacon is a cost
effective alternative to the
traditional tower light. An M12
sealing grommet in the base
allows for cable entry and
termination inside the enclosure.
Maximum cable size is 5mm.
11mm
11º Side knockout
position
Features
LED long life
Extra bright
Tri-colour
Combined audible
& visual signal
360o visibility
Cage guard option available
- see accessory page
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
LEDA125-01
24v Dc ---
48 SM LEDs
Kg 0.33
APPROVED AND
CONFORMITIES
o
C -20+45
IP 65
Current:
Amber
Green/Red
450mA
250mA
dB 90
INDUSTRIAL
26
Visual Signals ROTATING
BEACONS
156mm
205mm
49mm
115mm
2 x 5mm x
51mm CRS
3 holes x 96 PCD
to accept No 6
self tap screw
[external fitting]
Features
Industrial Rotating Beacons >
R201/200 Series
Continuously rated
Suitable for use with
conduit BESA box
Suitable for surface
or wall mounting
Product overview
travelling through 360 degrees.
Generally, this type of beacon has
a greater degree of light output
than other models but this is off-set
by the fact that the parabolic
reÀector only illuminates one
given point at a time.
The R201/200 Series uses a
parabolic reÀector which, driven by
an electric motor, revolves around
a continuously illuminated lamp
on the vertical axis of the beacon
creating a powerful beam of light
Optional wall bracket
& protection guard available
- see accessory page
Diode Polarised (DP) options
DYDLODEOHIRU¿UHDODUPV\VWHPV
Magnetic base versions available
Twin belt drive systems
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Mounting Base
Code No:
Voltage:
Light Source:
R201-13
12v Dc --R201-14
24v Dc --R201-29 z
24v Dc --R201-60
12v Dc --24v Dc --R201-61 z
R201-62
12v Dc --R201-63
24v Dc --R201-64
48v Dc --R200-03
24v Ac ~
R200-02
48v Ac ~
R200-04
115v Ac ~
R200-05
230v Ac ~
R200-04-MB
115v Ac ~
R200-05-MB
230v Ac ~
z
Diode Polarised for Fire Alarm Systems
Kg 0.83
APPROVED AND
CONFORMITIES
50 Hz
Current:
H1 x 55w
4.70 A
H1 x 70w
3.00 A
Ba15s x 10w
0.60 A
Ba15d x 21w
1.85 A
Ba15d x 21w
0.95 A
Ba15d x 48w
4.00 A
Ba15d x 48w
2.00 A
Ba15d x 35w
0.55 A
Ba15d x 48w
2.00 A
Ba15d x 35w
0.55 A
Ba15d x 60w
0.55 A
Ba15d x 60w
0.29 A
Ba15d x 60w
0.55 A
Ba15d x 60w
0.29 A
MB - Magnetic Base
o
C -10+55
ADD THE FOLLOWING
LENS CODES TO THE
PRODUCT WHEN
ORDERING
IP 65
01 02 03 04 05
RPM160+30 Dc
RPM 120 Ac
INDUSTRIAL
FIRE
27
Visual Signals ROTATING
BEACONS
Industrial Rotating Beacons >
RA201/200 Series
Features
Continuously rated
Suitable for use with
conduit BESA box
Product overview
The RA201/200 Series uses a
parabolic reÀector which, driven by
an electric motor, revolves around
a continuously illuminated lamp
on the vertical axis of the beacon
creating a powerful beam of light
travelling through 360 degrees.
Generally, this type of beacon has
a greater degree of light output
than other models but this is
off-set by the fact that the parabolic
reÀector only illuminates one given
point at a time. The RA series
also incorporates a Piezo Buzzer
producing 95dB, giving the user
two signals in one unit.
Suitable for surface
or wall mounting
Optional wall bracket
& protection guard available
- see accessory page
Twin belt drive system
Two signals in one unit
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Mounting Base
Code No:
Voltage:
Light Source:
Current:
RA201-20
RA201-21
RA201-64
RA200-03
RA200-02
RA200-24
RA200-25
12v Dc --24v Dc --48v Dc --24v Ac ~
48v Ac ~
115v Ac ~
230v Ac ~
H1 x 55w
H1 x 70w
Ba15d x 35w
Ba15d x 48w
Ba15d x 35w
Ba15d x 60w
Ba15d x 60w
4.70 A
3.00 A
0.55 A
2.00 A
0.55 A
0.55 A
0.29 A
Kg 0.86
APPROVED AND
CONFORMITIES
50 Hz
o
C -10+55
ADD THE FOLLOWING
LENS CODES TO THE
PRODUCT WHEN
ORDERING
IP 65
01 02 03 04 05
RPM160+30 Dc
INDUSTRIAL
RPM 120 Ac
dB 95
28
Visual Signals ROTATING
BEACONS
Industrial Rotating Beacons >
R401/400 Series
Product overview
The R401/400 DIN Base Series
uses a parabolic reÀector which,
driven by an electric motor,
revolves around a continuously
illuminated lamp on the vertical
axis of the beacon creating a
powerful beam of light travelling
Features
through 360 degrees. Generally,
this type of beacon has greater
degree of light output than other
models but this is off-set by the
fact that the parabolic reÀector
only illuminates one given point
at a time. The 401/400 Series
incorporates both bottom and side
entry cabling access and mounting
is achieved via external three
point ¿xing.
Continuously rated
Suitable for surface
or wall mounting
Optional wall bracket
& protection guard available
- see accessory page
Twin belt drive system
Optional M20 side-entry
conduit knockout
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Mounting Base
Code No:
Voltage:
R401-13
12v Dc --R401-14
24v Dc --R401-29 z
24v Dc --R401-60
12v Dc --24v Dc --R401-61 z
R401-62
12v Dc --R401-63
24v Dc --R401-64
48v Dc --R400-03
24v Ac ~
R400-02
48v Ac ~
R400-04
115v Ac ~
R400-05
230v Ac ~
z
Diode Polarised for Fire Alarm Systems
Kg 0.98
APPROVED AND
CONFORMITIES
50 Hz
Light Source:
Current:
H1 x 55w
H1 x 70w
Ba15s x 10w
Ba15d x 21w
Ba15d x 21w
Ba15d x 48w
Ba15d x 48w
Ba15d x 25w
Ba15d x 48w
Ba15d x 25w
E14 x 60w
E14 x 60w
4.70 A
3.00 A
0.60 A
1.85 A
0.95 A
4.00 A
2.00 A
0.60 A
2.00 A
0.55 A
0.55 A
0.29 A
o
C -10+55
IP 65
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
RPM160+30 Dc
01 02 03 04 05
RPM 120 Ac
INDUSTRIAL
29
Visual Signals XENON
BEACONS
26mm
50mm
ø76mm
M4 x 13mm lg
studs. Nuts and
washers provided
2 Leads x 500mm
ø45mm
2 off Snap-fit Optional
Fixing Plates supplied
for Surface mounting
Industrial Xenon Beacons >
X80 Series
Product overview
The X80 Series incorporates a
discharge capacitor and
convertor circuit to ignite xenon
gas inside a glass tube, resulting in
a Àash of light. This beacon offers
an economic solution for general
signalling applications where local
2 x slots
4 x 9mm
55mm
8mm thick
Fixing Plate
signal indication is required. The
beacons are fully assembled and
ready for immediate installation.
The unit offers two mounting
options, either stud mount or
surface mounting using the two
piece ¿xing plate supplied. One
plate is ¿xed to the appropriate
surface the other to the beacon,
the two plates then ‘Snap Fit’
together.
Features
Continuously rated
Wide operating voltage
(QHUJ\HI¿FLHQW
180o visibility
Economical
IP67
Material
UV Stable Polycarbonate Lens
UV Stable Polycarbonate Base
Code No:
Voltage:
Light Source:
Current:
X80-01
24v Dc ---
Xenon 0.30 J
40 mA
X80-02
10-100v Dc --20-72v Ac ~
Xenon 2.0 J
110 mA # at 24v Dc
X80-04
85-265v Ac ~
Xenon 2.0 J
50 mA # at 230v Ac
Kg 0.13
APPROVED AND
CONFORMITIES
o
C -20+55
IP 67
FPM 60/65
INDUSTRIAL
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
FIRE
01 02 03 04 05
30
Visual Signals XENON
BEACONS
102mm
138mm
138mm
151mm
ES Version
2 x 5mm
knockout
51mm
65mm
Industrial Xenon Beacons >
X125 Series
Product overview
The X125 Series utilises a
discharge capacitor and converter
circuit to ignite xenon gas inside a
tube, resulting in a brilliant Àash of
light. Xenon gas ignites virtually
instantaneously so maximum
brightness is obtained immediately.
25mm
X125 Series
X125 Series
Xenons have an added advantage
of low current consumption
combined with a reasonable life
span. The design of the X125
Series ensures a 360 degree light
output. A screw base version is
also available, see the ES version
which is ideal for easy or temporary
installation due to the ES27 screw
base. Xenon beacons are one of
the most ef¿cient, effective and
brightest visual signals available.
ES Version
Features
Continuously rated
Suitable for use with
conduit BESA box - X125 only
Suitable for surface
or wall mounting
Optional wall bracket &
protective guard available
- X125 only - see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
X125-Ac/Dc
Xenon 2.0 J
130 mA z
X125-55
X125-56
10-100v Dc --20-72v Ac ~
115v Ac ~
230v Ac ~
Xenon 2.3 J
Xenon 2.7 J
30 mA
21 mA
ES Version
X125ES-51
X125ES-52
115v Ac ~
230v Ac ~
Xenon 2.3 J
Xenon 2.7 J
30 mA
21 mA
At 24v Dc ---
z
X125
Kg 0.17
0.20 X125ES
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
FPM 60
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
31
162mm
Visual Signals XENON
BEACONS
ø98mm
Optional Piezo
Buzzers
27.6
3 Holes
x ø4.5 on
88 pcd
Industrial Xenon Beacons >
X125 DIN Base Series Series ensures a 360 degree light
Product overview
The X125 DIN Base Series utilises
a discharge capacitor and converter
circuit to ignite xenon gas inside a
tube, resulting in a brilliant Àash of
light. Xenon gas ignites virtually
instantaneously so maximum
brightness is obtained immediately.
The design of the X125 DIN Base
output. Xenon beacons are one of
the most ef¿cient, effective and
brightest visual signals available.
The Audible XA125 offers 2.7 joules
of Àash energy and two piezo
sounders located in the base of the
unit and offers a choice of either
continuous tone or a pulsed tone
that can operate independently of
the beacon. A M12 sealing grommet
in the base for cable entry and
termination inside the enclosure.
Lead exit
position 5mm max
cable size
11mm
11º Side knockout
position
Features
Continuously rated
Suitable for surface
or wall mounting
Combined audible & visual
option available - XA125 only
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
SRLQW¿[H[WHUQDO
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
X125-64
Xenon 2.0 J
130 mA z
X125-62
X125-63
10-100v Dc --20-72v Ac ~
115v Ac ~
230v Ac ~
Xenon 2.3 J
Xenon 2.7 J
30 mA
21 mA
Audible Option
NEW
XA125-63
230v Ac ~
Xenon 2.7 J
120mA zz
Pre-set at 24v Dc ---
With both audible & visual signals
operating at the same time
zz
z
X125
Kg 0.25
0.34 XA125
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
FPM 60
01 02 03 04 05
INDUSTRIAL
dB 90
XA125
32
Visual Signals XENON
BEACONS
X195 & X197
Deep Base Option
X195 Shallow Base Option
Industrial Xenon Beacons >
X195 - 5J / X197 - 10 J Series
Features
Product overview
The X195 Series utilises a discharge
capacitor and converter circuit to
ignite xenon gas inside a tube
resulting with a Àash of light igniting
virtually instantaneously for
immediate maximum brightness.
Xenons have an added advantage of
low current consumption combined
with a reasonable life span and are
one of the most ef¿cient, effective
and brightest visual signals available.
The X195 Series offers shallow
base and deep base options. The
X197 Series is a 10 Joule Xenon,
offering only a deep base option
and has restrictive use (see
technical datasheet).
Continuously rated - X195 only
Suitable for use with
conduit BESA box
Suitable for surface
or wall mounting
M20 side entry (deep base only)
or bottom cable entry - X195 only
Bottom cable entry - X197 only
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
5 Joules Version
X195-02WH-SB
X195-02WH
X195-05WH-SB
X195-05WH
~
15-28v Ac/Dc --~
15-28v Ac/Dc --180-265v Ac ~
180-265v Ac ~
Xenon 5.0 J
Xenon 5.0 J
Xenon 5.0 J
Xenon 5.0 J
310 mA
310 mA
110 mA
110 mA
24v Dc ---
Xenon 10.0 J
650 mA z
10 Joules Version
X197-02WH NEW
z
At 24v Dc ---
Kg 0.25
APPROVED AND
CONFORMITIES
50 Hz
o
C -25+45
IP 65
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
FPM 60
01 02 03 04 05
INDUSTRIAL
FIRE
33
Visual Signals XENON
BEACONS
Industrial Xenon Beacons >
of low current consumption
combined with a reasonable life
X201-200 Series
Product overview
The X201/200 Series utilises a
discharge capacitor and converter
circuit to ignite xenon gas inside a
tube, resulting with a Àash of light.
Xenon gas ignites virtually
instantaneously so maximum
brightness is obtained immediately.
Xenons have an added advantage
span. The X201/200 Series
provides a 360 degree light ouput
and has a Single Flash or Double
Flash option. The Double Flash
option extends the signal
duration making it more noticeable
to the human eye. Brightness is
increased by the use of a Dioptric
(Fresnel) lens which magni¿es
the light output. Xenon beacons
are one of the most ef¿cient,
effective and brightest visual
signals available.
Features
Continuously rated
Suitable for use with
conduit BESA box
Suitable for surface
or wall mounting
6LQJOHRU'RXEOHÀDVKRSWLRQ
Diode polarised (DP) options
DYDLODEOHIRU¿UHDODUPV\VWHPV
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
X201-18 z
12/24v Dc ---
Xenon 10J/7.5J
1.45/0.7 A
X201-19 zz
12/24v Dc ---
Xenon 10J/7.5J
1.45/0.7 A
X200-88
24v Ac ~
Xenon 10J/7.5J
0.72 A
X200-21
115v Ac ~
Xenon 10J/7.5J
0.10 A
X200-22
230v Ac ~
Xenon 10J/7.5J
0.06 A
z
Pre-set at 24v Dc ---
Kg 0.72
APPROVED AND
CONFORMITIES
zz
Diode Polarised for Fire Alarm Systems
50/60 Hz
o
C -25+55
IP 65
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
FPM 60x90
01 02 03 04 05
INDUSTRIAL
FIRE
34
Visual Signals XENON
BEACONS
Industrial Xenon Beacons >
X201SD-200S Series
Product overview
The X201/SD200S Series utilises a
discharge capacitor and converter
circuit to ignite xenon gas inside a
tube, resulting with a Àash of light.
Xenon gas ignites virtually
instantaneously so maximum
brightness is obtained immediately.
Xenons have an added advantage
of low current consumption
combined with a reasonable life
span. The X201SD/200S Series
provides a 360 degree light ouput
and are IP66 rated making them
ideal for marine applications. The
X201SD has a double Àash as
standard. Xenon beacons are one
of the most ef¿cient, effective and
brightest visual signals available.
Features
Continuously rated
Suitable for surface mounting
Ideal for areas of high vibration
Very robust construction
360o visibility
IP66
Material
UV Stable Polycarbonate Lens
Zinc Cast Metal Base
Code No:
Voltage:
Light Source:
Current:
X201-SD-12
12-48v Dc ---
Xenon 11.0J
1.50 A z
X200S-240
240v Ac ~
Xenon 11.0J
0.05 A
At 24v Dc ---
z
Kg 0.92
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -35+66
IP 66
60 Ac
FPM 120
Dc
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02
MARINE
INDUSTRIAL
35
Visual Signals XENON
BEACONS
Industrial Xenon Beacons >
consumption combined with a
X401/400 Series
Product overview
The X401/400 DIN Base Series
utilises a discharge capacitor and
converter circuit to ignite xenon gas
inside a tube, resulting with a Àash
of light. Xenon gas ignites
virtually instantaneously so
maximum brightness is obtained
immediately. Xenons have an
added advantage of low current
reasonable life span. The
X401/400 Series provides a 360
degree light ouput and has a
Single Flash or Double Flash
option. The Double Flash option
extends the signal duration making
it more noticeable to the human
eye. Brightness is increased by
the use of a Dioptric (Fresnel) lens
which magni¿es the light output.
This series also incorporates both
bottom and side entry cabling
access and mounting is achieved
via external three point ¿xing.
Features
Continuously rated
Suitable for surface
or wall mounting
6LQJOHRUGRXEOHÀDVKRSWLRQ
Diode polarised (DP) options
DYDLODEOHIRU¿UHDODUPV\VWHPV
M20 side or bottom cable entry
Optional wall bracket &
protective guard available
- see accessory page
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Code No:
Voltage:
Light Source:
Current:
X401-18 z
X401-19 zz
X400-88
X400-89 z
X400-21
X400-22
12/24v Dc --12/24v Dc --24v Ac ~
48v Ac ~
115v Ac ~
230v Ac ~
Xenon 10J-7.5J
Xenon 10J-7.5J
Xenon 10J-7.5J
Xenon 7J/5J
Xenon 10J-7.5J
Xenon 10J-7.5J
1.45/0.7 A
1.45/0.7 A
0.72 A
0.37 A
0.10 A
0.06 A
Pre-set at 24v Dc --- zzDiode Polarised for Fire Alarm Systems
z
Ambient Temperature Range -25oC to +35oC
z
Kg 0.82
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+55
IP 65
FPM 60x90
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
36
Visual Signals XENON
BEACONS
Industrial Xenon Beacons >
provides a 360 degree light ouput
X501/500 Series
and has a Single Flash or Double
Product overview
The X501/500 Extra High Output
Series utilises a discharge
capacitor and converter circuit to
ignite xenon gas inside a tube,
resulting with a Àash of light.
Xenon gas ignites virtually
instantaneously so maximum
brightness is obtained immediately.
Xenons have an added advantage
of low current consumption
combined with a reasonable life
span. The X501/500 Series
Flash option. The Double Flash
option extends the signal duration
making it more noticeable to the
human eye. The Extra High Output
capacity of this series makes it
suitable for the more demanding
of visual applications.
Brightness is increased by the use
of a Dioptric (Fresnel) lens which
magni¿es the light output. This
series also incorporates both
bottom and side entry cabling
access and mounting is achieved
via external three point ¿xing.
Xenon beacons are one of the
most ef¿cient, effective and
brightest visual signals available.
Code No:
Voltage:
Light Source:
Current:
X501-18 z
X500-21
X500-22
12/24v Dc --115v Ac ~
230v Ac ~
Xenon 24J/18J
Xenon 24J/18J
Xenon 24J/18J
2.30/1.30 A
0.65 A
0.40 A
Features
Continuously rated
Suitable for surface
or wall mounting
'RXEOHÀDVKRSWLRQ
Extra high output
Optional wall bracket &
protective guard available
- see accessory page
M20 side or bottom cable entry
Suitable for local
signalling applications
360o visibility
Material
UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base
Pre-set at 24v Dc ---
z
Kg 1.25
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+35
IP 65
FPM 60x90
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
INDUSTRIAL
01 02 03 04 05
37
MOFLASH
AUDIBLE & VISUAL
SIGNALS FOR USE IN
POTENTIALLY EXPLOSIVE
ATMOSPHERES
38
Visual Signals
EXPLOSION PROOF
BEACONS
200mm
60mm
Explosion Proof
> E-Flare LED Portable Beacon
Features
Product overview
The HZ610 series portable LED
beacon has been designed for use
in Zone 2, Potentially Explosive
Atmospheres. The beacon is
ideally suited for marking/
warning of temporary hazards in
an explosion proof environment.
It is of robust construction and
can be set for either a Flashing or
Static (Steady On) light mode by
twisting the lens to the left or to the
right. The beacon comes with a
wide range of accessories making
the product extremely versatile in
a wide range of applications. The
beacon requires two ‘D’ cell
Alkaline batteries for operation
(not supplied).
LED long life
360o visibility
Low battery indicator
Shock resistent
40 hours life
Ultra quick installation
Zone 2
II 3G EX 11C T4 Gc
IP66
Material
UV Stable Polycarbonate Lens
UV Stable ABS Body
Code No:
Voltage:
Light Source:
LED-P-HZ610-01 NEW
3v Dc ---
8 LEDs
LED-P-HZ610-02 NEW
3v Dc ---
8 LEDs
Accessories
50170
Aviation Base
50171
Magnetic Clip
Kg 0.35
APPROVED AND
CONFORMITIES
50175
Flotation Collar
o
C -20+50
50176
Suction Cup
IP 66
50177
Daylight Hood
50178
Carry Bag
FPM 160
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
MARINE
01 02
EXPLOSION
PROOF
INDUSTRIAL
39
Audible Signals
EXPLOSION PROOF
SOUNDERS
2 x M20
entries
EExe Unit
2 x M20
entries max
EExd Unit
193±3
1
30±1
30±1
2
3
Explosion Proof Audible Sounders >
EDB3 Series
Features
Product Overview
This range of light weight all GRP,
Àameproof sounders is intended for use
in potentially explosive gas and dust
atmospheres and has been designed
with high ingress protection to cope
with the harsh environmental conditions
found offshore and onshore in the oil,
For EExd Unit, Position 2 is used
if only 1 x M20 entry required
Rated for Zone 1 and Zone 2
gas and petrochemical industries.
The Àamepaths, Àare and the body,
are manufactured completely from a
UV stable glass reinforced polyester.
Stainless steel screws and sinter are
incorporated thus ensuring a corrosion
free product. A tapered Àamepath is
used to overcome the problems of
assembly of parallel spigot Àamepaths.
ATEX approved
EX II 2GD
Up to 118dBA output
27 tones, user selectable
2 x M20 cable entries
IP66, 67
Material
Case Material: Glass
Re-Inforced Polyester
Code No:
Voltage:
Frequency:
Current:
EDB3-24
EDB3-115
EDB3-230
12-48v Dc --115v Ac ~
230v Ac ~
800-3970 Hz
800-3970 Hz
800-3970 Hz
380 mA z
135 mA
62 mA
At 24v Dc ---
z
Kg 4
APPROVED AND
CONFORMITIES
o
C -55+70
IP 66, 67
50/60 Hz
dB 118
EXPLOSION
PROOF
40
Visual & Audible Signals
EXPLOSION PROOF
BEACONS
Entry R
6 - M5 Cover
Fixing Screws Stainless Steel
Optional
Backstrap
- Stainless
Steel
20mm±1
Cage Guard not Included
Entry L
Optional Guard
Guard
33mm±1
177mm±2
205.5mm
± 2mm
5mm±1
137mm±2
Material ––Steel
Steel
Material
2 - M5 x 10mm±1 Deep
Direct Mounting Holes
39mm±1
Explosion Proof 5J Xenon Beacons >
EX11 Series
39mm±1
39mm±1
Features
Product Overview
The EX11 series has been designed
for use in potentially explosively
conditions. The glass reinforced
polyester enclosures are suitable
for offshore or onshore, where light
weight combined with corrosion
39mm±1
Rated for Zone 1 and Zone 2
resistence is required. The beacon
housing is manufactured completely
from a UV stable, glass reinforced
polyester. (Cage guard not
included). Stainless steel screws
and mounting bracket are
incorporated ensuring a totally
corrosion free product.
Corrosion resistent GRP
2 x M20 cable entries
ATEX approved
EX II 2GD
5 Joules
IP66, 67
Material
Case Material: Glass
Re-Inforced Polyester
Code No:
Voltage:
Light Source:
Current:
EX11-24
EX11-115
EX11-230
24v Dc --115v Ac --230v Ac ~
Xenon 5 J
Xenon 5 J
Xenon 5 J
320 mA
100 mA
60 mA
Kg 2.5
APPROVED AND
CONFORMITIES
o
C -55+70
IP 66, 67
50/60 Hz
FPM 60
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
EXPLOSION
PROOF
01 02 03 04 05
41
145
246
Visual Signals
EXPLOSION PROOF
BEACONS
Explosion Proof 5J Xenon Beacons >
EX150 Series
30
153.60
3 x 7mm dia
Mounting Holes
Features
Suitable for Zones 1, 2, 21 & 22
subject to temperature
restrictions
Product overview
The EX150 Series is an explosion
proof xenon beacon suitable for
use in potentially explosion proof
environments. The unit is supplied
with a lens guard as standard and
the mounting bracket allows for a
360 degree mounting option.
30
This unit has an inbuilt auto
synchronisation facility that allows
synchronisation when installed
in multi-beacon installations or
alternatively the unit can be set
to Flip Flop mode. The 24v Dc
version has a line monitoring
feature.
Gas groups IIC, IIB & IIA
50/60 Hz
EExd IIC T4
Rugged construction
5 Joule power rating
IP67
Material
Aluminium LM6M Body
Hardened Glass Lens
Stainless Steel Accessories
Code No:
Voltage:
Light Source:
Current:
EX150-07
24v Dc ---
Xenon 5J
0.30A
EX150-08
48v Dc ---
Xenon 5J
0.18A
EX150-09
115v Ac ~
Xenon 5J
0.14A
EX150-10
230v Ac ~
Xenon 5J
0.06A
Kg 2.75
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -50+70
ADD THE FOLLOWING LENS
CODES TO THE PRODUCT
WHEN ORDERING
IP 66, 67
01 02 03 04 05
FPM 60
EXPLOSION
PROOF
INDUSTRIAL
MARINE
42
Visual Signals
EXPLOSION PROOF
BEACONS
Explosion Proof 10J Xenon Beacons >
EX200/201 Series
Features
Rated for Category 1 use
(formerly Zone 1 & 2)
ATEX approved
Product overview
The EX201 Series is an explosion
proof xenon beacon range for
operation in Zone 1 applications.
They offer a wide range of voltages
and also single or double Àash
options. Supplied with a protective
guard as standard and of robust
construction, the EX201 Series
is ideal for hazardous area
applications which require a
product to withstand the most
demanding of environments. The
body is constructed of marine
grade aluminium offering corrosion
resistance and the lens is made
from toughened borosilicate heat
resistant glass.
II 2 G EEx de IIC T3 (T4)
2 x M20 Conduit
6LQJOHRUGRXEOHÀDVK
Wide range of voltages
3URWHFWLYHJXDUG¿WWHG
as standard
Robust housing
IP66
Material
Marine Grade Aluminium
Toughened Glass Lens
Code No:
Voltage:
Light Source:
Current:
EX201-07 z
12/24v Ac/Dc
Xenon 10/7.5J
1.45/0.7A
EX200-09
115v Ac ~
Xenon 10/7.5J
0.10A
EX200-10
230v Ac ~
Xenon 10/7.5J
0.06A
Pre-set at 24v Dc --Diode Polarised option available
z
Kg 9.0
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -25+66
ADD THE FOLLOWING LENS
CODES TO THE PRODUCT
WHEN ORDERING
IP 66
01 02 03 04 05
FPM 60/90
EXPLOSION
PROOF
INDUSTRIAL
MARINE
43
Visual Audible Signals
EXPLOSION PROOF
BEACONS
Intrinsically Safe Signal Range >
LED Sounder Combination Signals
Features
Rated for Zone 0
Product overview
ATEX approved
II 1G EEx ia IIC T4
40 tones
Comprising of an alarm sounder
with three alarm stages, a LED
beacon ¿tted with 6 high intensity
LEDs and a combined unit. These
units need to be used with a
suitable zener barrier whose
ouput parameters do not exceed
Vo 28v Dc, lo 93mA, Po 660mW or
form any galvanic isolator speci¿ed
by the system certi¿cates.
100dB @ 1m
Volume control
2 x 20mm cable entries
IP65
Material
Flame Retardant ABS UL 94 VO
Code No:
Voltage:
EAE150-06
16-28v Dc ---
25 mA
EX150-06
16-28v Dc ---
LED Array high intensity 25 mA
EXAE150-06
16-28v Dc ---
LED Array high intensity 48 mA
EX150-ZB
16-28v Dc ---
Zennerbarrier
Kg 0.2 to 0.3
APPROVED AND
CONFORMITIES
o
C -40+60
Light Source:
IP 65
Current:
dB 100
EXPLOSION
PROOF
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02 03 04 05
44
Audible Signals
EXPLOSION PROOF
BEACONS
Explosion Proof Audible Sounders >
EAE Series
Features
Product overview
Suitable for general signalling
duties, their robust construction
makes installation in the harshest
of environments possible.
Additional features include
automatic synchronisation on
multi-beacon systems and
stainless steel guard as standard.
Rated for Category 1 use
(formerly Zone 1 & 2)
ATEX approved
The enclosures are manufactured
from corrosion proof, marine grade
copper free LM6 aluminium which
is phosphated and powder coated.
All models have two M20 cable
entries and large termination areas.
II 2 G EExd IIC T4
117dB @ 1m
2 x 20mm cable entries
4mm terminals for
ease of connection
IP66, 67
Material
Marine Grade LM6 Aluminium
Code No:
Voltage:
Current:
EAE100-24
24v Dc ---
250 mA
EAE100-115
115v Ac ~
110 mA
EAE100-230
230v Ac ~
56 mA
3.40 Ac
Kg 3.20 Dc
APPROVED AND
CONFORMITIES
o
C -50+55
IP 66, 67
dB 117
EXPLOSION
PROOF
MARINE
INDUSTRIAL
45
Visual Audible Signals
EXPLOSION PROOF
BEACONS
388
ø181
165
Explosion Proof Xenon Beacon
Sounders > EXAE Series
Product overview
The combined xenon beacon/
sounder offers the installer both
visual and acoustic signals in one
unit. The audio visual components
can be operated from a single
power source or separately,
offering unrivalled Àexibility.
Suitable for general signalling
duties, their robust construction
30 30
3 Holes ø 7
Features
makes installation in the harshest
of environments possible.
Additional features include
automatic synchronisation on
multi-beacon systems and
stainless steel guard as standard.
The enclosures are manufactured
from corrosion proof, marine grade
copper free LM6 aluminium which
is phosphated and powder coated.
All models have two M20 cable
entries and large termination areas.
Rated for Category 1 use
(formerly Zone 1 & 2)
ATEX approved
II 2 G EExd IIC T4
117dB @ 1m
5 Joule beacon output
2 x 20mm cable entries
4mm terminals for
ease of connection
Material
Marine Grade LM6 Aluminium
Code No:
Voltage:
Light Source:
Current:
EXAE100-24
24v Dc ---
Xenon 5 J
250 mA
EXAE100-115
115v Ac ~
Xenon 5 J
140 mA
EXAE100-230
230v Ac ~
Xenon 5 J
56 mA
4.8 Ac
Kg 5.0 Dc
APPROVED AND
CONFORMITIES
o
C -50+55
IP 66, 67
ADD THE FOLLOWING LENS
CODES TO THE PRODUCT
WHEN ORDERING
dB 117
01 02 03 04 05
FPM 60
EXPLOSION
PROOF
INDUSTRIAL
MARINE
46
MOFLASH
OBSTACLE MARKING
47
75
88
238
Visual Signals
OBSTACLE MARKING
BEACONS
77
ø1
ø90
Obstacle Marking : Low Intensity Mobile
Obstacles > 10 Candela
3-M8 x 18
G 3/4” x 22
Product overview
These portable marking lights are
powered by a maintenance free
3.6v Nickel Metal Hydride battery.
A mono crystal solar module ¿tted
inside the lens keeps the battery
fully charged and can provide
enough power to keep the beacon
operating non stop for 400 hours
in continuously cloudy and rainy
days. A built in photocell switches
the beacon on & off at dusk and
dawn. The On/Off level is between
70/100 lux and is automatic. The
unit incorporates an automatic
switch after 18 hours in the dark to
protect the battery life.
Features
Conforms to ICAO Annexe 14
Volume 1, Low Intensity Type A
Long life and low maintenance
Rugged construction
IP65
Material
Cast Aluminium with UV Stable
Polycarbonate Lens
Code No:
Voltage:
Light Source:
Effective Cd:
OLF-PS-10-02
3.6v / 10AH
LED
10
Kg 23
APPROVED AND
CONFORMITIES
o
C -20+80
IP 65
FPM 60
OBSTACLE
MARKING
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
02
48
Visual Signals
OBSTACLE MARKING
BEACONS
170mm
135mm
Rubber
Seal
170mm
135mm
Rubber
Seal
Obstacle Marking : Low Intensity Mobile
Obstacles > 40 Candela
Product overview
This range of beacons has been
designed primarily for use on
vehicles. There are two mounting
options, either a permanent ¿x by
two screws into the base of the
beacon or a magnetic base. Both
beacons are pulsed through an
internal circuit to generate an On/
Off cycle to product the required
Àash rate. The typical application
is for marking mobile obstacles in
or around aerodromes.
Emergency & Security vehicles
are designated with Blue lenses
and all others shall be Amber.
The minimum light output for
each colour is 40 Cd.
2 Holes x No 6
self tap screw
x 50mm CRS
Ferrite
Magnet
BASE OPTIONS
Features
Conforms to ICAO Annexe 14
Volume 1, Low Intensity Type C
Magnet base provides a 35
Newton force calculated to
SURYLGHD¿[RQÀDWVXUIDFHV
of upto 80 MPH (subject to
conditions)
3HUPDQHQW¿[EDVHLV
supplied with 2 metres of
À\LQJOHDGZLWKPDOH
female bullet connectors
IP65
Material
UV Stable Polycarbonate Lens
Acetal Base with Neoprene Cover
Code No:
Voltage:
Light Source:
Current:
Effective Cd:
Magnetic Base
FF98-34-01
FF98-38-01
FF98-35-03
FF98-40-03
12v Dc --24v Dc --12v Dc --24v Dc ---
Ba15d x 21w
Ba15d x 21w
H1 T/H x 70w
H1 T/H x 70w
1.75 A
0.88 A
4.70 A
3.00 A
40
40
40
40
Permanent Fix
FF98-37-01
FF98-39-01
FF98-36-03
FF98-41-03
12v Dc --24v Dc --12v Dc --24v Dc ---
Ba15d x 21w
Ba15d x 21w
H1 T/H x 55w
H1 T/H x 70w
1.75 A
0.88 A
4.70 A
3.00 A
40
40
40
40
1.00 MB
Kg 0.65 PF
APPROVED AND
CONFORMITIES
o
C -25+66
IP 65
FPM 60
AUTOMOTIVE
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 03
OBSTACLE
MARKING
49
Visual Signals
OBSTACLE MARKING
BEACONS
Obstacle Marking: Low Intensity Lights >
10 & 32 Candela Series
Product overview
This range of Obstacle Lights
have been designed to offer a
more cost effective option for
compliance to the low intensity
ICAO regulations. The 10 and
32 Candela both incorporate low
consumption Red LED arrays.
A power rating of 8 watts for the
10 Cd and 12 watts for the 32Cd
lend themselves for use with
photocell control if required.
The typical application is marking
¿xed objects in or around
aerodromes where the object is
a less extensive one and its height
above the surrounding ground is
less than 45m. These beacons
can be used in conjunction with
medium and high intensity lights.
Features
Conforms to ICAO Annexe
Volume 1, Low Intensity
Type A (10Cd) & Type B (32Cd)
Other voltage ranges available
Accessories include 50001
mounting bracket & 50010
cage guard
IP66
Material
UV Stable Polycarbonate
Lens & Base
Stainless Steel Sealing Band
Code No:
Voltage:
Light
Source:
Mode:
Current:
OLS-02-10-02
OLS-03-10-02
OLF-02-10-02
OLS-04-10-02
24v Ac/Dc --~
48v Ac/Dc --~
24v Ac/Dc --~
230v Ac/Dc --~
LED
LED
LED
LED
Static
Static
Flashing
Static
0.33 A
0.16 A
0.33 A
0.04 A
10
10
10
10
OLS-02-32-02
OLS-03-32-02
OLF-02-32-02
OLS-04-32-02
24v Ac/Dc --~
48v Ac/Dc --~
24v Ac/Dc --~
230v Ac/Dc--~
LED
LED
LED
LED
Static
Static
Flashing
Static
0.50 A
0.24 A
0.50 A
0.05 A
32
32
32
32
Kg 0.6
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -20+45
Effective
Candela:
IP 66
FPM 60/90
OBSTACLE
MARKING
50
160
300
Visual Signals
OBSTACLE MARKING
BEACONS
186
4-18mm x 21mm
Mounting Hole
Product overview
This medium intensity warning light
incorporates state of the art LED
technology into an ef¿cient
optical design that has a power
consumption of less than 50 watts.
The beacon is of a rugged
construction and has been
designed to withstand the most
severe weather conditions. For
ease of installation the units
size and weight have been kept
to a minimum. The typical
installation is marking ¿xed objects
in or around aerodromes where
the object is an extensive one or
its height above the level of
surrounding ground is greater than
45m. Type B lights can be used in
conjuction with low intensity lights.
18
45º
334
380
Obstacle Marking: Medium Intensity
Lights > 2000 Candela
Hoist Hole
Mounting Hole
Features
&RQ¿UPVWR
ICAO Annexe 14 Volume 1,
Medium Intensity
Type B (Flashing) &
Type C (Static)
Long life and low maintenance
IP66
Material
Cast Aluminium Base
UV Resistent Dome
Code No:
Voltage:
Light Mode:
Source:
Current:
OLS-04-2000-02
115/230v Ac ~
LED
Static
0.50/0.80 A 2400
OLF-04-2000-02
115/230v Ac ~
LED
Flashing
0.50/0.80 A 2400
Kg 14
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -40+60
Effective Cd:
IP 66
FPM 60/90
OBSTACLE
MARKING
MARINE
51
Visual Signals
OBSTACLE MARKING
BEACONS
Obstacle Marking: Medium Intensity
Lights > 2000 Candela
Features
Product overview
The LED 2000 Series conforms
to the requirements of the ICAO
for aviation obstruction marking.
Designed for use on tall buildings,
masts and pylons making it ideal
for remote or inaccessible
locations. The LED pentagon
shaped tower incorporating 800
high power LEDs, allows for a
perfect 360o beacon which can be
visible over 15 miles in optimum
weather conditions. 3 metres of
1.5 SY steel braided cable is
supplied attached to the beacon
assembly making entry to the
beacon unnecessary.
Conforms to ICAO regulation
Annex 14 Volume 1 for
steady, Medium intensity
Type C beacons
Low maintenance
Long life
360o visibility
IP66, 67
Material
Cast Aluminium
UV Stable Polycarbonate Lens
Code No:
Voltage:
Light
Source:
Effective:
LED-04-2000-02
230v Ac ~
LED output
2000
Kg 19
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -40+55
IP 66, 67
OBSTACLE
MARKING
MARINE
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
02
52
MOFLASH
AUTOMOTIVE
53
Visual Signals
AUTOMOTIVE
BEACONS
190.5
170mm
135mm
Rubber
Seal
2 Holes x No 6
self tap wscre
x 50mm CRS
Automotive Rotating Beacons >
R88 Series
Product overview
The R88 Series uses a parabolic
reÀector which, driven by an electric
motor, revolves around a continuously
illuminated lamp on the vertical axis of
the beacon creating a powerful beam
of light travelling through 360 degrees.
Generally, this type of beacon has a
greater degree of light output than
Ferr
ite
Magnet
BASE OPTIONS
other models but this is off-set by the
fact that the parabolic reÀector only
illuminates one give point at a time.
The R88 is available as either a
permanent ¿xed unit or with a
magnetic base and vehicle lighter
socket lead for temporary and
occasional use. This is ideal for when
the beacon is not required to be ¿xed
permanently to the roof of the vehicle.
Features
Continuously rated
Choice of magnetic or
¿[HGPRXQWLQJRSWLRQV
Worm drive system
IP65
Material
UV Stable Polycarbonate Lens
Acetal Base with Neoprene Cover
Code No:
Light Source:
Current:
ROTATING MB (Magnetic Base)
R88-34
12v Dc --R88-38
24v Dc ---
H1 x 55w
H1 x 70w
4.70 A
3.00 A
ROTATING SF (Fixed Base)
R88-37
12v Dc --R88-39
24v Dc ---
H1 x 55w
H1 x 70w
4.70 A
3.00 A
1.11 MB
Kg 0.67 SF
APPROVED AND
CONFORMITIES
Voltage:
o
C -25+55
IP 65
FPM 160+30
AUTOMOTIVE
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02 03 04 05
54
Visual Signals
AUTOMOTIVE
BEACONS
170mm
135mm
Rubber
Seal
2 Holes x No 6
self tap wscre
x 50mm CRS
Automotive Xenon Beacons >
X88 Series
Product overview
The X88 Series utilises a discharge
capacitor and converter circuit
to ignite xenon gas inside a tube,
resulting in a brilliant Àash of light.
Xenon gas ignites virtually
instantaneously so maximum
brightness is obtained immediately.
Xenons have an added advantage of
Ferr
ite
Magnet
BASE OPTIONS
Features
low current consumption combined
with a reasonable life span. The X88
is available as either a permanent
¿xed unit or with a magnetic base
and vehicle lighter socket lead for
temporary and occasional use. This
is ideal for when the beacon is not
required to be ¿xed permanently to
the roof of the vehicle.
Continuously rated
Choice of magnetic or
¿[HGPRXQWLQJRSWLRQV
360o visibility
IP65
Material
UV Stable Polycarbonate Lens
Acetal Base with Neoprene Cover
Code No:
Voltage:
Light Source:
Current:
XENON MB (Magnetic Base)
12/24v Dc --X88-72 z
Xenon 8.5/6.5J
1.40/0.7 A
XENON SF (Fixed Base)
X88-75 z
12/24v Dc ---
Xenon 8.5/6.5J
1.40/0.7 A
Pre-set to 24v Dc ---
z
1.11 MB
Kg 0.67 SF
APPROVED AND
CONFORMITIES
o
C -25+55
IP 65
FPM 60x90
AUTOMOTIVE
ADD THE FOLLOWING LENS CODES
TO THE PRODUCT WHEN ORDERING
01 02 03 04 05
55
MOFLASH
ACOUSTIC
56
PIEZO BUZZERS
ACOUSTIC
Connections for
115v & 230v
Tone Terminals
Pulsed A + B
Continuous A + C
Connections for
12v to 48v
Tone Terminals
Pulsed B + A
Continuous B + C
Acoustic Signals Piezo Buzzers>
AE20M Series
Product overview
Features
Pulsed or continuous tone
Local signalling applications
The AE20M Piezo Buzzer Series
offers an economical and cost
effective solution for local area
applications. At only 43mm
diameter, the buzzer offers the
Compact
installer an unobtrusive acoustic
signal in a wide range of voltages
with most voltages offering pulsed
or continuous tone capability.
95 dB
IP55
Material
ABS Plastic
Code No:
Voltage:
Frequency:
Current:
AE20M-12 z
AE20M-24
AE20M-48
AE20M-115
AE20M-230
12v Dc ~
24v Dc ~
48v Dc ~
115v Ac ~
230v Ac ~
2900 Hz
2900 Hz
2900 Hz
2900 Hz
2900 Hz
20 mA
10 mA
10 mA
20 mA
10 mA
Pulsed tone only
z
Kg 0.08
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -20+60
IP 55
dB 95
PULSED OR
CONTINUOUS
INDUSTRIAL
57
INDUSTRIAL BUZZERS
ACOUSTIC
35.0
40.0
1.45
6.5
25.0
36.5
0.8
FLAT TOP
22.4
35.2
16.0
TERM
250 S
(6.35 X
(FEMA
TRUMPET TOP
51.0
6.0
25.0
R5.5
Acoustic Signals Industrial Buzzers
> AE30M Series
Product overview
The AE30M Àat top and trumpet
top miniature buzzers produce a
rich, low frequency sound, ideal
for security, automotive and
industrial signalling.
Using a traditional buzzer
mechanism, AE30M buzzers
16.0
32.0
TERMINATIONS
250 SERIES BLADES
(6.35 X 0.81 TAB)
(FEMALE -VE TERMINAL)
Features
High quality “real buzzer” sound
produce a high quality sound
compared with most piezo based
products.
The compact design and
convenient ¿xing hole allow for
easy installation in all locations.
The units are colour coded:
Black = 12v Dc, Red = 24v Dc.
These products were formerly
supplied by Klaxon.
Termination by male &
female spade terminals
12 or 24v Dc units
Flat or Trumpet top options
Compact design
Fixing hole provided
for ease of installation
IP55
Material
ABS Plastic
Code No:
Voltage:
Frequency:
Current:
Flat Top
AE30M-FT-01 NEW
AE30M-FT-02 NEW
6-14v Dc --10-28v Dc ---
450Hz +/- 20Hz
450Hz +/- 20Hz
30 mA z
25 mA zz
Trumpet Top
AE30M-TT-01 NEW
AE30M-TT-02 NEW
6-14v Dc --10-28v Dc ---
450Hz +/- 20Hz
450Hz +/- 20Hz
30 mA z
25 mA zz
z
at 12v Dc ---
Kg 0.28
APPROVED AND
CONFORMITIES
at 24v Dc ---
zz
o
C -20+60
IP 30
dB 80/90
CONTINUOUS
INDUSTRIAL
AUTOMOTIVE
58
INDUSTRIAL BUZZERS
ACOUSTIC
AE35M
49.00
46.00
60.35 CRS
5.00
LEAD LENGTH
_ 10.00
150,00 +
Product overview
The AE35M (P40) and AE36M
(P60) buzzers are high output
buzzers designed for warning in
security, automotive and industrial
signalling.
83.0
67.0
80
.0
C
R
S
Acoustic Signals Industrial Buzzers
> AE35M & AE36M Series
14.0
51.0 CRS
AE36M
Features
With a choice of two signals
(continuous or pulsed) from each
unit, applications include panel
alarms, process control alarms,
moving machinery and various
automotive and aerospace
applications.
These products were formerly
supplied by Klaxon.
High sound output
Wide voltage range
Choice of continuous
or pulsed signals
Compact designs for
installation in all locations
IP30
Material
ABS Plastic
Code No:
Voltage:
Frequency:
Current:
AE35M-02 NEW
AE36M-02 NEW
6-28v Dc --6-28v Dc ---
3200Hz
3200Hz
50 mA z
57 mA z
At 24v Dc ---
z
Kg 0.57/0.94
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -20+60
IP 55
dB 98-105
PULSED OR
CONTINUOUS
INDUSTRIAL
59
ELECTRONIC SOUNDERS
ACOUSTIC
Acoustic Signals Electronic Sounders
> AE40M Series
Features
Product overview
Low current consumption
8 selectable tones
M20 conduit
knockout (deep base only)
The AE40M Series is an 8-tone
electronic sounder available in
10-30v Dc and 230v Ac versions.
This product is ideal for ¿re alarm
and industrial applications.
The Dc version is available in both
deep base or shallow base, with
deep base offering side entry and
increased IP protection. The Ac
version is deep base as standard.
IP54 shallow base
IP65 deep base
Material
ABS Plastic
Code No:
Voltage:
Frequency:
Current:
AE40M-24R-SB
AE40M-24R z
AE40M-230R z
10-30v Dc --10-30v Dc --230v Ac ~
800-2580 Hz
800-2580 Hz
800-2580 Hz
32 mA z
32 mA z
50 mA
Current at 24v Dc ---
z
Kg 0.32
APPROVED AND
CONFORMITIES
Increased Weatherproof to IP65
z
o
C -20+45
IP 54/65 z
dB 100
8 TONES
CONTINUOUS
INDUSTRIAL
FIRE
60
INDUSTRIAL BUZZERS
ACOUSTIC
L
E
N
Acoustic Signals Industrial Buzzers
> AE95 Series
Features
Product overview
Industrial buzzer
Wide voltage range
Low frequency tone
The AE95 is a medium output low
frequency mechanical buzzer.
The IP protection can be increased
to IP65 by the use of the
optional weatherproof back box.
The AE95 is suitable for a wide
range of applications including
fork lift trucks, emergency alarms,
process control alarms and for
mechanical handling machinery.
15 minute rating
Rugged construction
115dB @ 1 m
IP53 (IP65 with back box)
Material
Mild Steel
Code No:
Voltage:
Frequency:
Current:
AE95-05
AE95-06
24/48v Ac/Dc--~
115/230v Ac/Dc --~
335 Hz
335 Hz
0.8 A
0.4/0.2 A
AE95-BB
Weatherproof back box z
Kg 0.68
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -20+66
IP 53/65 z
dB 115
ON 15 MINS
OFF 1 MINS
INDUSTRIAL
61
ELECTRONIC SOUNDERS
ACOUSTIC
166.3
213.5
149.5
38.6
145
99.5
Acoustic Signals Electronic Sounders
High Output Audio Visual
> AE Series
Product overview
These alarm sounders have been
designed for Fire, Industrial &
Marine applications where an
audible and visual option may be
required. The units incorporate
wide operating voltages, a choice
of 64 tones that are automatically
synchronised on multi unit
installation. All units offer wire to
base installation for ¿rst ¿x
convenience, and has been
speci¿cally designed to allow for
ease of ¿nal ¿x installation.
Dia 6mm
Fixing Holes
Features
Volume control (+/- 20dB)
Vds approved
Three stage alarm
Audible & visual option
5 Joule Xenon
IP66
Material
Flame Retardent ABS
Code No:
Voltage:
Current:
dB at 1m:
AE110-02
AE110-03
AE110-04
10-60v Dc --24-48v Ac ~
115/230 Ac ~
10-50 mA
10-50 mA
40 mA
110
110
110
300 mA
110 mA
110
110
With Xenon Beacon Fitted
AEX110-02
10-60v Dc --AEX110-04
115/230v Ac ~
Kg 1.2
APPROVED AND
CONFORMITIES
50/60 Hz
o
Ac
C -25+55
-25+70 Dc
IP 66
dB 110
MARINE
INDUSTRIAL
FIRE
62
MECHANICAL SIRENS
ACOUSTIC
180
95.0
83
40
AS100M
64.0
32.0
20mm
x 1.5mm pitch
76
2 x 7mm
60
95
82
106.00
198.00
AS200M
A
CABLE ENTRY
M20 X 1.5
2 HOLES 71.00
7.00 DIA
A
Acoustic Signals Industrial Sirens
> AS100M & AS200M Series
50.00
38.00
96.00
38.0
98.50
SECTION A-A
38.0
56.0
Features
Product overview
High ouput siren sound
Rugged construction
mounting bracket for ease of
installation. They are also
rugged in construction and
are weatherproof to IP65.
Suitable for arduous conditions
including mining and quarrying
applications.
These sirens have been designed
for a range of applications where
a high output sound is required.
Both the AS100M and AS200M
are manufactured for industrial
environments and have a
Mounting bracket for
ease of installation
Continuously rated
1 x M20 Cable Entry
IP65
Material
Cast Aluminium Body
ABS Rotor, Stator and Cover
Code No:
Voltage:
Frequency:
Current:
AS100M (Klaxon Mono 72)
AS100M-115
AS100M-230
115v Ac/Dc --~
230v Ac/Dc--~
1800 Hz
1800 Hz
2.7A
1.2A
AS200M (Klaxon Duplo)
AS200M-115
AS200M-230
115v Ac/Dc --~
230v Ac/Dc --~
1680 Hz
1680 Hz
2.7A
1.2A
Kg
1.7kg AS100M
2.0kg AS200M
APPROVED AND
CONFORMITIES
1800 AS100M
1680 AS200M
Hz
o
C -30+45
IP 65
120dB AS100M
dB 127dB AS200M
INDUSTRIAL
63
INDUSTRIAL SIRENS
ACOUSTIC
AS300
113
170
AS300M
95
140
AS400
AS400M
ø176
Acoustic Signals Industrial Sirens
> AS300M & AS400M Series
Product overview
These sirens have been designed
for a wide range of applications
where a loud commanding signal
is required. The AS300 Series
is designed for surface mounting
with a separate mounting plate
to allow for ease of installation.
3 Holes ø7.10
Equi-spaced on a
PC ø195 20
The unit comes pre-wired and is
supplied with 1 metre of cable.
The AS400M Series is a vertical
mounted siren, manufactured for
heavy duty environments and is
of rugged construction. The low
frequency it produces is ideal for
use over medium size areas.
Both sirens are weatherproof
when mounted according to
instructions supplied.
Cable entry 20mm
6 Type 3
250
Posns
Features
Continuously rated
High sound output
AS300M - 127 dB
AS400M - 125 dB for Ac
AS400M - 116 dB for Dc at 1 m
IP55 - AS300M
IP65 - AS400M
Material
AS300M - ABS Construction
AS400M - Cast Aluminium Body
and Noryl Rotor
Code No:
Voltage:
Frequency:
Current:
AS300M-115
AS300M-230
115v Ac/Dc --~
230v Ac/Dc--~
1680 Hz
1680 Hz
2.7A
1.0A
AS400M-24 z
AS400M-115 z
AS400M-230 z
24v Dc --115v Ac/Dc --~
230v Ac/Dc --~
900 Hz
900 Hz
900 Hz
8.0A
3.0A
1.4A
Kg
1.8kg AS300M
4.5kg AS400M
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -30+45
IP 55/65 z
MARINE
INDUSTRIAL
FIRE
64
INDUSTRIAL MECHANICAL
BUZZERS
Acoustic Signals Industrial Marine Buzzer
> ABHF8 Series
Product overview
169
103.2
51
90.5
330
254
79.4
Features
Industrial/marine buzzer
The ABHF8 Series buzzer is a
weatherproof signalling horn
designed for both industrial and
light marine applications.
Producting a high output
penetrating sound, it is particularly
suitable for use on small boats and
canal barges as well as for
industrial uses such as time
signalling and process control
alarms. The buzzer offers a wide
voltage range and is contained
within a brass enclosure suitable
for corrosion environments.
High output penetrating sound
111dB @ 1m
Rated 15 min On / 1 min Off
IP65
Material
Brass
Code No:
Voltage:
Frequency:
Current:
ABHF8-1437
ABHF8-1436
24/48v Ac/Dc --~
115/230v Ac/Dc --~
335 Hz
335 Hz
0.80 A
0.4/0.2 A
Kg 2.10
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -20+50
IP 65
ON 15 MIN
OFF 5 MIN
MARINE
dB 111
INDUSTRIAL
65
INDUSTRIAL MECHANICAL
BUZZERS
Acoustic Signals Industrial Buzzer
> Adaptahorn Series
Product overview
The Adaptahorn is a heavy duty,
weatherproof vibrating buzzer,
giving a high decibel, low
frequency signal with a low
current consumption. The units
are completely assembled, feature
Features
convenient plug-in assembly
and include a volume adjustment
set screw on the front cover.
The die cast housing has a
corrosion-resistant powder expoxy
¿nish. The back box is pre-tapped
at 3/4” NPT (M20 adaptor available
upon request) The unit is Ideal for
a wide range of general signalling
applications.
High output penetrating sound
Volume control
Durable, long life mechanism
Will function at -20% to +10%
of nominal voltage.
Continuously rated
IP65
Material
Zinc Alloy
Code No:
Voltage:
Frequency:
Current:
ABK877-G1
ABK876-N5
ABK875-R5
24v Dc --120v Ac ~
230v Ac ~
350-400 Hz
350-400 Hz
350-400 Hz
0.16 A
0.16 A
0.16 A
Kg 2.10
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -35+66
IP 65
CONTINUOUS
dB 112
INDUSTRIAL
66
INDUSTRIAL HOOTERS
ACOUSTIC
Acoustic Signals Industrial Hooters
> A1 Series
Product overview
The A1 is a powerful motor driven
hooter giving the unique ‘klaxon’
sound. The high output, low
frequency resonating sound gives
a powerful warning tone. With a
sound output of 120dB, it can cut
Features
through background noise in
almost any environment and is
ideal for use as a time signalling
alarm or process alarm in the
noisiest factory. In addition, the
A1 can be used on barges, work
boats and dock sides and for other
similar marine applications.
Powerful, high output
120 dB
Robust construction
Weatherproof to IP65
Material
Die cast aluminium & Zinc
Mild Steel
ABS Plastic
Code No:
Voltage:
Frequency:
Current:
AHA1-2000
AHA1-2001
AHA1-2002
AHA1-2004
AHA1-2003
AHA1-2006
12v Dc --24v Dc --48v Dc --115v Ac ~
230v Dc --230v Ac ~
420 Hz
420 Hz
420 Hz
420 Hz
420 Hz
420 Hz
5.0 A
2.30 A
1.30 A
0.84 A
0.80 A
0.76 A
Kg 2.0
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -35+66
IP 65
ON 2 MIN
OFF 5 MIN
MARINE
dB 120
INDUSTRIAL
67
INDUSTRIAL HOOTERS
ACOUSTIC
Acoustic Signals Industrial Hooters
> Klaxet Series
Product overview
The Klaxet is a motor driven hooter
giving the unique ‘Klaxon’ sound.
The high output, changing
frequency note gives a
powerful warning tone which can
be heard above background noise
in industrial applications. The
Klaxet is ideal for time signalling,
process control alarms, telephone
extension ringing (as originally
used by British Telecom) and
cranes. Manufactured with a
cast iron housing, the Klaxet is
designed to withstand rugged
use in all situations.
Features
Powerful, high output
111dB
Robust construction
Weatherproof to IP54
Material
Cast iron / mild steel
Code No:
Voltage:
Frequency:
Current:
AHKLAXET-1000
12v Dc ---
470 Hz
2.50 A
AHKLAXET-1001
24v Dc ---
470 Hz
1.00 A
AHKLAXET-1008
115v Ac ~
470 Hz
0.50 A
AHKLAXET-1010
230v Ac ~
470 Hz
0.33 A
Kg 1.60
APPROVED AND
CONFORMITIES
50/60 Hz
o
C -20+40
IP 54
ON 1 MIN
OFF 5 MIN
dB 111
INDUSTRIAL
68
INDUSTRIAL HOOTERS
ACOUSTIC
Acoustic Signals Industrial Hooters
> ES Manual Series
Product overview
The ES is a manually
operated hooter producing the
unique ‘Klaxon’ sound for
applications where a power supply
is unavailable. Typical applications
include small boats, canal badges,
Features
mine trucks and fork lift trucks.
The ES gives a powerful sound
which, with its low frequency tone,
makes its an effective warning
device.
Manual operation - no power
supply required
Lightweight and compact
Robust and reliable
IP54
Material
Mild steel
Code No:
Frequency:
AHES-1290
150-350 Hz
Kg 1.20
APPROVED AND
CONFORMITIES
IP 54
dB 103
INDUSTRIAL
69
MARINE INDUSTRIAL AIRHORNS
ACOUSTIC
127m m dia
Acoustic Signals Industrial Air Horns
> SK Series
length
length
4 inch BSP
1/4 inch BSP
111m m dia
111m m dia
SK2
SK6
Features
Product overview
general purpose signalling.
Operated from a compressed air
supply, their powerful high output
low frequency sound cuts through
background noise to provide an
effective warning. Optional
compressor available for
applications which do not have
an on-site air supply.
The SK Series of air horns are
manufactured from non-ferrous
materials which offer high
corrosion and weatherproof
resistance for use in railway and
marine applications as well as
Continuous signal
Optional compressor if no
direct air supply available
120-134 dB at 1m
Robust construction
Easy to install
IP66
Material
Brass/Phosphur bronze
Code No:
Length: dB:
Air Consumption: Air Pressure:
Rating:
APSK6-GM
APSK2-GM
APSK2-EM
APSK6-EM
341mm
358mm
435mm
437mm
50-100 L/min
50-100 L/min
50-100 L/min
50-100 L/min
Continuous
Continuous
Continuous
Continuous
Code No:
132
120
134
124
Voltage:
50-100 psi
10-30 psi
10-30 psi
50-100 psi
Static Pressure:
Current:
APSK-Compressor
24v Dc
14 psi
20 A
(49mm o/d, 116mm L, 0.41 kg) To obtain optimum dB performance the airhorn
may require ¿ne tuning when used with a compressor.
Kg 1.80
APPROVED AND
CONFORMITIES
GM 370 Hz
EM 315 Hz
IP 66
dB 120-134
INDUSTRIAL
MARINE
70
INDUSTRIAL AIRHORNS
ACOUSTIC
AP198 = 198mm
AP360 = 360mm
AP450 = 450mm
Acoustic Signals Industrial Air Horns
> AP Series
Product overview
Features
Continuous signal
The AP Series of air horns are
suitable for general purpose
signalling where high output is
required such as foundries,
steelworks and petrochemical
plants. Operated from a
compressed air supply their
powerful low frequency sound
cuts through background noise
to provide an effective alarm.
Optional compressor available
for applications which do not
have an on-site air supply.
Optional compressor if no
direct air supply available
125 dB at 1m
Robust construction
IP66
Material
Aluminium body
Brass horn
Code No:
Air Consumption:
Air Pressure:
Frequency:
AP198M
50-133 L/min
55-140 psi
660 Hz
AP360M
50-133 L/min
55-140 psi
387 Hz
AP450M
50-133 L/min
55-140 psi
307 Hz
Kg 1.4
APPROVED AND
CONFORMITIES
o
C -30+90
IP 66
dB 125
INDUSTRIAL
71
FIRE BELL
ACOUSTIC
Acoustic Signals Fire Bell
> A6FB Series
Product overview
Features
Diode polarised
98+3 dB
The A6FB is an economy bell
suitable for ¿re alarm signalling
applications. It produces the
traditional alarm bell sound and
offers easy installation. The bell
has the following mounting
options: 50mm and 60mm pitch
holes suitable for BESA box
mount; 4” square or single
mount Gang Box.
Terminal allows for 2+ and
2- cabling, up to 2.5mm2
IP42
Material
Steel gong
Plastic back box
Code No:
Voltage:
Current:
A6FB-24DC-DP
18-28v Dc ---
15mA
at 24v Dc ---
Kg 0.5
APPROVED AND
CONFORMITIES
o
C -20+45
IP 42
dB 98+3
FIRE
72
FIRE BELL
ACOUSTIC
210
Allen/Hex bolt
150
64.72
50.5
60
Acoustic Signals Fire Bell & Strobe >
A6FB-S Series
Strobe rate switch
Features
Bright strobe in clear lens for
maximum light output
Product overview
6HOHFWDEOHÀDVKUDWH
30/60 per minute
A combined bell and xenon strobe
with high sound and light output
to assist in the design of
DDA-compliant ¿re systems.
Using the market leading
aluminium gong for excellent
sound output and a clear lens to
maximise light output. The A6FB-S
is ideal for installations that call for
a traditional bell tone but require
visual alarm indication as well.
Low current consumption
Single point of installation
minimises wiring and
associated costs
IP21
Material
Aluminium Gong
Code No:
A6FB-S-24-05
NEW
Voltage:
Current:
24v Dc ---
See below z
Current consumption
z
Bell only
z
Combined Bell and Xenon Strobe
Kg 0.58
APPROVED AND
CONFORMITIES
o
C -20+55
11 mA
30 Àashes / min 30 mA
60 Àashes / min 50 mA
IP 21
dB 95
FPM 30/60
INDUSTRIAL
FIRE
73
INDUSTRIAL MARINE BELL
ACOUSTIC
Acoustic Signals Industrial & Marine >
IP66 Bells Series
Features
High quality
penetrating sound
Product overview
103 dB
Suitable for harsh
weather conditions
The IP66 bell is a fully enclosed
signal bell. It is suitable for areas
where harsh weather conditions
exist, such as exposed outdoor
locations, marine applications
and wash/hose down areas.
The solenoid driven mechanism
produces a clear, loud tone.
IP66
Material
Steel Gong
Code No:
Voltage:
Current:
A6B-12DC-IP66
12v Dc ---
0.60 A
A6B-24DC-IP66
24v Dc ---
0.30 A
A6B-115AC-IP66
115v Ac ~
0.11 A
A6B-230AC-IP66
230v Ac ~
0.05 A
Kg 1.0
APPROVED AND
CONFORMITIES
o
C -30+50
IP 66
dB 103
CONTINUOUS
INDUSTRIAL
MARINE
74
INDUSTRIAL BELL
ACOUSTIC
Acoustic Signals Industrial Bells >
Adaptabel Series
Features
Supplied with a universal
mounting plate for all
installation option
Product overview
Rugged die-cast construction
The Adaptabel range is a high
quality solenoid driven bell
designed for use in commercial,
industrial and transportation
applications. With a choice of three
gong sizes, this unit delivers a
clear, loud ring which is free from
mechanical clatter. The bigger the
gong, the deeper, louder and more
penetrating the sound. When ¿tted
with the optional back box, the
units are weatherproof and suitable
for mounting in exposed locations.
Red version available in 6” 24v Dc.
Robust and reliable
Wide range of voltages available
Cabling entries x 3
(3/4”NPT or M20)
Optional IP65
weatherproof back box
Material
Steel Gong
Code No:
Voltage:
Size:
Db:
Current:
A4B-K-12DC
A4B-K-24AC
A4B-K-24DC
A4B-K-115AC
A4B-K-230AC
A6B-K-12DC
A6B-K-24AC
A6B-K-24DC
A6B-K-24DCR
A6B-K-115AC
A6B-K-230AC
A8B-K-24DC
A8B-K-115AC
A8B-K-230AC
12v Dc --24v Ac ~
24v Dc --115v Ac ~
230v Ac ~
12v Dc --24v Ac ~
24v Dc --24v Dc --115v Ac ~
230v Ac ~
24v Dc --115v Ac ~
230v Ac ~
101mm/4”
101mm/4”
101mm/4”
101mm/4”
101mm/4”
152mm/6”
152mm/6”
152mm/6”
152mm/6”
152mm/6”
152mm/6”
203mm/8”
203mm/8”
203mm/8”
99dB
99dB
99dB
99dB
99dB
101dB
101dB
101dB
101dB
101dB
101dB
102dB
102dB
102dB
125 mA
62 mA
34 mA
22 mA
125 mA
62 mA
34 mA
22 mA
62 mA
34 mA
22 mA
ABK-WPBB
Weatherproof backboxz
Kg 1.0/1.4/2.3
APPROVED AND
CONFORMITIES
o
C -35+66
50180 Cage guard
IP 44/65 z
dB 99-102
CONTINUOUS
INDUSTRIAL
75
MOFLASH
ACCESSORIES
76
Brackets >
50001>50160
Miscellaneous
ACCESSORIES
50001 Right Angled Wall Bracket
Suitable for use with 88, 125 &
201/200 series beacons
50007
50004
50004 Right Angled Wall Bracket
Suitable for use with 401/400, 501/500,
600 & X250 series beacons
50006 Pipe Bracket
Suitable for use with 401/400, 501/500,
600 & X250 series beacons
50001
50007 Right Angled Wall Bracket
Suitable for use with
125 & 125DIN series beacons
50158 IP66 Weatherproof Band
Suitable for use with
201/200 series beacons (not shown)
50159
50159 Single Bracket with Cable Box ICAO
Suitable for use with LED501/500
& X250 series beacons
50160 Double Bracket with Cable Box ICAO
Suitable for use with LED501/500
& X250 series beacons
Cage Guards >
50003>50010
50003
Small Cage Guard
Suitable for use with
125 series beacons
50003/1 Optional Mounting Plate
Suitable for use with
125 series beacons
50010
Large Cage Guard
Suitable for use with 201/200,
401/400 & 501/500 series beacons
50010/1 Optional Mounting Plate
Suitable for use with 201/200,
401/400 & 501/500 series beacons
Please Note: Brackets and Cage Guards are
Please Note: Brackets and Cage Guards are
not interchangeable at this present time.
not interchangeable at this present time.
50160
50006
77
Anti-Vibration Mount >
50080
50080 Anti-Vibration Mount
Suitable for use with 88, 125,
201/200 series beacons
Spare Lens
Covers
50018>50022
50018 Red Lens
50019 Amber Lens
50020 Blue Lens
50021 Green Lens
50022 Clear Lens
Please Note:
Suitable for use with 125 series beacons only
Spare Lens
Covers
50064>50068
50064 Amber Lens
50065 Red Lens
50066 Blue Lens
50067 Green Lens
50068 Clear Lens
Please Note:
Suitable for use with 88, 98, 201/200,
401/400 & 501/500 series beacons
Miscellaneous
ACCESSORIES
Units 17-19 Klaxon Industrial Estate
Warwick Road, Tyseley,
Birmingham B11 2HA
England
For Sales Enquiries:
Tel:
+44 (0) 121 707 6681
Fax:
+44 (0) 121 707 8305
Email:
Email:
MoÀash Signalling Limited reserves the right to
modify product speci¿cations without prior notice
within our policy of continual product development.
uksales@moÀash.co.uk
exportsales@moÀash.co.uk
Website: www.moÀash.com
8