Safety is a sound investment.
sirenco
sirens • beLLs • Hooters • eLectronic sounders • FLameProoF deVices • marine sounders and beacons
intrinsicaLLY saFe sounders and beacons • Voice sounders • combination units • airHorns
Contents
Product group Listing
3
Selection and Application
4-6
A guide to selecting and positioning wide area sirens
7
Ingress Protection Table (IP)
8
Flameproof
9
UL Explosion Proof
10
apparatus CHART
11
DECIBEL VERSUS DISTANCE Chart
12
Index
13-20
Products
21-158
Notes
159
Distributor:
sirenco
2
Contents
ProDUCt groUP LIstIng:
motorised sirens
21-24
Long range sirens
25-33
Hand oPerated sirens
34-37
air and HYdrauLic sirens
38-39
Hooters
40-44
beLLs
45-47
FLameProoF deVices (bansHee)
48-61
bansHee combination units
62-64
eLectronic sounders
65-67
beacons (bansHee)
68-71
emergencY FLare
72-73
is PortabLe beacon
74
75-76
otHer Products (Hand Held Horns & Megaphones)
son F1 range
77
a range sounders and combination units
78-82
exPLosion ProoF deVices (e2s)
83-91
is range
92-99
beacons (e2s)
100-101
marine range
102-106
son 4 range
107-108
aPPeLLo
109-110
gPH Horns
111-112
Hootronics
113-116
beacons (sPectra)
117-141
PaneL mount Products (Indicator lamps and buzzers)
142-146
traFFic LigHts, sPectra
147-151
sounders and combination units, sPectra
152-156
turbo bLowers
157-158
sirenco
3
SELECTION AND APPLICATION
Listed below are some important product information and categories which will be required when making a selection of
the type of signalling unit that will best suit your application. There is a wide range of sirens, electronic sounders, hooters,
flameproof units and beacons available to choose from. Kama Industries offers on site service in assisting you with your
selection of a signalling unit. Please contact your supplier to arrange this.
PLEASE NOTE: Utmost care was taken in the preparation of this catalogue to insure all the information is correct.
Kama Industries and any of its distributors do not accept any liabilities for any consequences resulting in the use of the
information contained in these documents. If in doubt, please contact your supplier.
Selecting a signalling device for a particular application is usually determined by various factors:
•
The type of electricity supply available
•
Ambient noise in the environment
•
The duration of signal required
•
The quality and type of audible or visual signal required to attract attention
•
Environmental conditions (indoor, outdoor, explosive atmosphere)
Environmental Factors
The intensity and type of sounder or beacon chosen for the area in which they will be used, will be dependant on the
application i.e. sounders for certain applications in the Food Industry may not be suitable for similar applications in
an industrial area. A sounder used in a Manufacturing Company (Heavy Industrial) may not be suitable for a similar
application at a School.
Industrial, Mining and Manufacturing
Included in this category is not only factory premises but also equipment and facilities used in factories, such as cranes,
mechanical handling vehicles, diesel generating sets and control panels. Also included in this category, are industrial
hazardous locations such as coal mines and the petro chemical industry.
Building: Commercial and Public
Hospitals, Schools, Offices, Building sites, Houses, Military sites and Airports can be classified under this category. Due to
continuous product research and developement some products may vary from the specifications in this catalogue.
Priority and Public Service Vehicles
Police vehicles, Fire departments and Ambulances
Marine
Dock and Ship installations, including any other hazardous sites (oil terminals etc.)
4
seLeCtIon AnD APPLICAtIon
Frequency
The frequency is the identication of note and is usually defined by the number of vibrations per second. To measure
frequency one should use a frequency meter. In cases where the electrical contractor does not have such a meter, it is
usually sufficient for the ambient noise frequency in an environment for our purposes to be identified. For example, the
noise in a machine shop in which a grinder is being operated would be of a high frequency, while that of forge with a
drop hammer would be of a low frequency.
Time rating
Account must be taken of the time cycle over which the alarm is required to operate and a signal has to be selected which
has an adequate time rate. It should be noted that sounders used as evacuation alarms are required to be continuously
rated. Sirens for example, are products available on the market which have time ratings of either one minute or more,
but these products are not accepted by the Fire Authorities. The contractor should keep this in mind when modifying or
inspecting existing installations.
Noise Level required
Having established the ambient or background noise and frequency level, the sound pressure level needs to be defined
in order for the sound to be heard over the distance that the sound is required to travel. Tests show that the ear can
distinguish a warning signal which is ten decibels below that of the ambient noise level, provided that there is an adequate
frequency differential.
Noise Attenuation
In selecting the correct sound pressure level required to cover an application, it is necessary to appreciate that as a “rule of
thumb” sound is absorbed and reduces at the rate of 6 decibels as the distance from the signal is doubled. This factor is
known as attenuation. Where the operating conditions are difficult, for example where there is a likelihood of high winds
or where there are solid objects in the noise path, attenuation of 8 to 10 decibels should be allowed for to avoid “blind
spots” or inadequate coverage. Before finally choosing the signal to be used, ensure that the same or similar sound is not
used in an adjacent system for other applications. Should the sounder be installed outdoors and be subjected to exterior
elements, then a weather proof version must be selected. It should be remembered that there are also in-door situations
that require weatherproof enclosures. Explosion or flameproof signal devices are essential if the sounder is required to be
sited in a location where there are explosive or fire hazard conditions.
Sounders Available
There are many basic types of signalling devices available but in this selection we are covering:
•
Sirens
•
Buzzers and Hooters
•
Electronic Sounders
•
Beacons
•
Bells
5
SELECTION AND APPLICATION
Sirens
Sirens are low frequency devices usually continuous rated and are electric motor driven. Air is pulled in through a multi
bladed impeller and pushed out through radial vents. The combination of motor speed and the number of impeller blades,
with the number and spacing of the radial outlets determine the frequency. The siren is used extensively for disaster
warning but also has many other applications. These include, uses as fire alarms, anti-theft/security alarms, process control,
time signalling, fault indication and machinery stop-start alarms. Most individual requirements are covered by sirens rated
from 100 W to 7.5 KW, which have sound outputs from 95 dB to 145 dB at 1 metre distances and giving an audible signal
over a range of 100 to 15000 metres.
Buzzers and Hooters
These are electro-mechanical devices where the diaphragm is deflected by an electro magnet. In general, hooters are
low cost and robust. Their applications include fire and security alarms in Industrial and Marine applications, truck horns,
process control, time signalling, telephone signalling, boat horns and public vehicle attack alarms. Buzzers can be used
with projectors to give more directional sound and are used as general industrial alarms, crane warning alarms, control
panel warning alarms, industrial truck alarms and boat alarms.
Electronic Sounders
The electronic sounder is by far the most versatile device available and has many distinct advantages as far as the design
engineer and contractor is concerned. Not least of these is the low current consumption and relatively high sound output,
which make the electronic sounder ideal for use in conjunction with battery powered systems. Consequently, this type of
sounder is also used extensively for fire and security alarm systems, as well as industrial mining, process control, marine
and hazardous area applications.
Beacons
The beacons can assist by adding additional visual attraction by means of a flashing, static or rotating format. These units
are normally available in RED, AMBER, GREEN and BLUE, but other colours are available on request. The LED beacon can
be set to flash at up to 120 flashes per minute or remain static.The Xenon flasher is avaliable in all the colours and the
LED flasher usually only in RED or AMBER, other colours available on request. When beacons are used in conjunction with
sirens or sounders, the unit can be connected to set the siren and beacon off simultaneously or with the siren sounding for
a short period and the beacon flashing until the condition for alert has been rectified.
Bells
These are motor driven or coil driven devices mainly used for School alarms, Fire and Security alarms and time signalling.
These units have high frequencies and low current consumption. Of particular interest to the contractor is that models
have been designed to make installation very simple.
6
A gUIDe to seLeCtIng AnD PosItIonIng
wIDe AreA sIrens
When selecting a siren, a careful study of the specific project is required. Although Kama Industries will always be prepared
to give advice, it is first of all necessary that each of the following points be considered:
1. The nature of the proposed warning signals, including sequences, duration of blasts, intervals and length of signal.
Each type of hazard should be given its own code to ensure the correct response. On-site warning signals must not be
confused with off-site warning signals.
2. Area and range of audibility to be covered by the system. The signal must be clearly audible to all persons, inside
and outside the plant likely to be affected.
3. The nature of the terrain and construction and heights of the buildings and structures on the site. Uneven ground
and enclosed or noisy areas must be taken into account.
4. The type of system to be installed. Plants with high levels of machine noise - or covering large areas - may be better
covered by a series of smaller sirens than by one large unit.
5. Local meteorological conditions. For example, temperature, fog, mist, wind, snow or rainfall must also be taken into
account.
6. The nature of other signals in the area. Hazard signals must not conflict with emergency services or civil defence
signals.
7. Test facilities. Siren motors, shutter and signal sequences should be regularly tested to ensure that they are still
functioning properly.
8. Availability of an adequate power supply, or a power back-up system.
9. The positioning of sirens. The ideal height above ground level for a siren depends on the individual type and
sound output of the instrument. Sirens should not be mounted too high above ground level: 4 m to 6 m are usually
recommended. Installing sirens on top of high buildings often has the effect of deflecting the sound wave upward
because of negative temperature gradients. Sirens should not be located close to tall buildings. There should be
adequate clearance around each instrument to allow sound distribution.
Coded Sirens
Similar to general-purpose sirens, but incorporating sound damping shutters that enable them to be used for making
clearly defined coded signals i.e. succession of short or long blasts, a mixture of short or long blasts, etc. This enables one
instrument to be used for a number of different signals. Shutter mechanisms are operated by a solenoid and are quoted as
accessory items, according to individual requirements.
remote Triggering
Situations may arise where a signalling device is installed on a site with a power source available at or close to the
mounting position of the siren. To trigger or switch the siren from a control room or distant site on the plant, a separate
cable may be required to be installed for this application. We offer a remote control switching system to accommodate
this. A transmitter is supplied to be installed at the control point and a receiver at the siren. This will allow more than one
siren to be triggered by one central transmitter.
7
Ingress Protection Table
Each product in this catalogue has been evaluated against the IP rating system. This is intended to allow the installer to
establish the product suitablity when subjected to the elements. It must be stressed that the products have been evaluated
using the first two digits of the rating system (and not certified and tested in some cases), as follows:
Protection against solid objects
0
No protection
0
No protection
1
Protected against solid objects greater than
50 mm, e.g. hand
1
Protected against vertically falling drops
of water
2
Protected against solid objects greater than
12 mm, e.g. fingers
2
Protected against water spray up to 15
degrees from a vertical position
3
Protected against solid objects greater than
2.5 mm, e.g. tools
3
Protected against water spray up to 60
degrees from a vertical position
4
Protected against solid objects greater than 4
1 mm, e.g. wire
4
Protected against water spray from all
directions
5
Protected against dust (no harmful deposits)
5
Protected against water jets from all directions
6
Protected against strong water jets from all
direction, e.g. off shore
7
Protected against immersion between
15 cm & 1 m in depth
8
Protected against long periods of immersion
6
8
Protection against liquids
Totally protected against dust
FLAmeProoF
Hazardous Areas
Note: (Classification of hazardous areas and equiptment must be undertaken by an authorised and qualified person. The
following information may be used based on that assumption, as guidance.)
In SA these products must comply to the latest SANS requirements for use of explosion protected devices in hazardous
areas. Visit www.sabs.co.za to see SANS 10086 - SANS 10119.
Hazardous areas are classified into zones and the following deals only with the risk due to flammable gases, vapours and
mists.
•
zone 0 - Where an explosive atmosphere is continuously present
•
zone 1 - Where an explosive atmosphere is often present and likely to occur in normal operation
•
zone 2 - Where an explosive atmosphere is not likely to occur in normal operation and if it occurs,
it is only present for a short period
gases and gas groups
•
group I - For Mining use
•
group II - For surface use only, namely IIA, IIB, IIC
rEPrESENTATIVE
gAS
CENELEC, EN50 018
BS5501 PT.5
SANS 60079
FrANCE C12-230
gErMANy VdE 0171
uSA uL698
grOuP
grOuP
grOuP
CLASS
grOuP
METHANE
I
I
IA orIB
1
D
PrOPANE
IIA
IIA
IIA or IIB
-
-
ETHyLENE
IIB
IIB
IIIA
2
C
HydrOgEN
IIC
IIC
-
3a
B
CArBON dISuLFIdE
IIC*
IIC
-
3b
-
ACETyLENE
IIC
IIC
-
3c
A
*Apparatus may not be suitable for Carbon Disulfide
gas Tempretures
A gas and air mixture can ignite when it comes into close contact with an excessively hot surface. The surface temperature
at which the equipment operates is therefore important and is classified as follows:
TEMP. CLASS
MAX. SurFACE TEMP.
T1
450°C
T2
300°C
T3
200°C
T4
135°C
T5
100°C
T6
85°C
9
UL EXPLOSION PROOF
The UL system of classification is simlar in principle as the CENELEC system as it classifies products in terms of class, division
and group, It is briefly explained as follows:
CLASS
•
•
•
Class I Gas
Class IIDust
Class III Fibre
DIVISION
•
•
Division I Division II GROUPS
•
•
•
•
Notes
10
Hazardous atmosphere present under normal conditions (similar to Zone 0 & Zone 1)
Hazardous atmosphere present under abnormal conditions (similar to Zone 2)
A,B,C & DGas (See representative gas table on page 9)
EMetal dust
FCarbon
GGrain / Chemical dust
Instruments, junction and terminal boxes, conduit with stopper boxes, cable
glands, light fittings, motors and transformers
Increased safety electrical
apparatus (Ex e)
Not Suitable
Not Suitable
Dust-ignition-protected electrical As for flameproof apparatus
apparatus (DIP)
Not Suitable
Type "n" electrical apparatus (Ex As for increased safety apparatus, but often in conjunction with other
n)
protection
a Categories relate to the ATEX Directive as discussed in ARP 0108
Suitable
Suitable
Suitable
Suitable
Suitable
Suitable
Zone 1
Category 2
Suitable
Suitable
Suitable
Suitable
Suitable
Suitable
Zone 2
Category 3
Zone 21
Category 2
Zone 22
Category 3
Separate certification for these locations is generally required
Separate certification for these locations is generally required
Separate certification for these locations is generally required
Separate certification for these locations is generally required
Separate certification for these locations is generally required
Separate certification for these locations is generally required
Separate certification for these locations is generally required
Zone 20
Category 1
Not Suitable
Not Suitable
Suitable
Not Suitable
Suitable
Suitable
Suitable if DIP A20
or B20 with IP 65
enclosures
Suitable if DIP A20,
Suitable if DIP A20,
A21, A22, B20 or B21 A21, B20 or B21 with
with IP 65 enclosures IP 65 enclosures
Separate certification for these locations is generally required
Separate certification for these locations is generally required.
Suitable but switch off if gas concentrations > 1.4 % (volume
fraction)
Suitable if certified as Suitable if certified as Suitable if certified Separate certification for these locations is generally required
such
such
as such
As for flameproof apparatus, but often in conjunction with other protection
Not Suitable
Specially protected electrical
apparatus (Ex s)
As for flameproof apparatus
Pressurized electrical apparatus
(Ex p)
Not Suitable
Not Suitable
Instruments and instrument control gear, push button stations, switches,
junction and terminal boxes, conduit with stopper boxes, cable glands, light
fittings, motors, switch gear, starters, distribution boards and transformers
Flameproof apparatus (Ex D)
Suitable
Switch gear, starters and transformers
Instruments and instrument control gear, push button stations, switches,
junction and terminal boxes, conduit with stopper boxes, cable glands, light
fittings, motors, switch gear, starters, distribution boards and transformers
Double protected explosion
protected apparatus
Not Suitable
Sand-filled or powder-filled
electrical apparatus (Ex q)
As for Ex ia apparatus
Intrisically safe electrical
apparatus (EX ib)
Suitable
Not Suitable
Instruments and instrument control gear, light fittings, small motors and
transformers. Standard equipment powered intrinsically safe supplies
Intrinsically safe electrical
apparatus (EX ia)
Zone 0
Category 1
Suitability of apparatus for use in the various zones in non-mining Group II applications
Encapsulated electrical apparatus As for flameproof apparatus, but often in conjunction with other protection
(Ex m)
Types of apparatus to which protection can be applied
Explosion protection
Apparatus
Not Suitable
Not Suitable
Suitable but switch off if gas concentrations > 1.4 %
(volume fraction)
Suitable if certified as such
Suitable but switch off if gas concentrations > 1.4 %
(volume fraction)
Suitable but switch off if gas concentrations > 1.4 %
(volume fraction)
Suitable with isolating interlocks, but switch off if gas
concentrations > 1.4 % (volume fraction)
Suitable but switch off if gas concentrations > 1.4 %
(volume fraction)
Suitable
Suitable but switch off if gas concentrations > 1.4 %
(volume fraction)
Suitable
Category M1 or M2 (if switched of as required below)
Suitability of apparatus for use in Group I
hazardous locations in mines
APPArAtUs ChArt
11
DECIBEL VERSUS DISTANCE Chart
Sound attenuation at higher frequencies
0
500 1000 2000 1.
2.
3.
4.
5.
- 500Hz - 1000Hz - 2000Hz - 4000Hz - 0 dB(A)
- 3 dB(A)
- 5 dB(A)
- 9 dB(A)
Determine the sound output of your device
Determine the sound frequency of the unit and see the dB variance
Subtract the dB variance of your device from the sound output at one meter.
Now go down the column to determine the sound output at a given distance.
The ideal sound level can be between 40-60 dB depending on the observer’s hearing.
Examples of industry noise levels in dB(A)
12
InDeX
MOTOrISEd SIrENS
Motorised Sirens (pages 21-24)
Sirenco 500SL
Sirenco 1000SL
Banshee Mono
Banshee Duplo
Sirenco 3LF Vertical
LONg rANgE SIrENS
Long range Sirens (pages 25-33)
Sirenco 1500S
Sirenco 2D
Sirenco 3LF
Sirenco 10S
Sirenco 15D
Anti Ice
Sirenco 5S
Shutter Valve
Sirenco LK100
Sirenco H150
Sirenco H200
HANd OPErATEd SIrENS
Hand Operated Sirens (pages 34-37)
Sirenco EX H200
Air Operated
AIr ANd HydrAuLIC SIrENS
Air and Hydraulic Sirens (pages 38-39)
Hydraulic
13
InDeX
HOOTErS
Hooters (pages 40-44)
Air Horn 370 Hz
Air Horn 660 Hz
Sirenco Motorised
Hooter
Sirenco Solenoid Bell
Sirenco Solenoid Bell
- Single Stroke
Sirenco HE36 Hooter
Telkom Relay
BELLS
Bells (pages 45-47)
Sirenco 6” Bell
FLAME PrOOF dEVICES
Flame Proof devices (pages 48-61)
14
Banshee EX Mono
Siren S1
Banshee EX Duplo Siren
S1
Banshee EX Multi
Sounder S1
Banshee EX Xenon
Beacon S1
Banshee EX LED
Beacon S1
Banshee EX 26S Siren
S1
Banshee EX 26D
Siren S1
Banshee EX Multi Sounder
& Beacon LED Combo S1
Banshee EX Multi Sounder
& Beacon Xenon Combo S1
Banshee EX Mono Siren
& Beacon LED/Xenon
Combo S1
Banshee Ex Duplo
Siren & Beacon
Xenon/LED Combo
S1
Banshee Ex Lite S1
Banshee Ex Floodlight S1
BansheeEx Terminal
Box S1
InDeX
COMBINEd uNITS
Banshee Combined units (pages 62-64)
Banshee Combo
ML & MX
Banshee Combo
DL & DX
Banshee Flashtone
Excel Lite
ELECTrONIC SOuNdErS
Electronic Sounders (pages 65-67)
Banshee Multitone Excel
Cybertone
Ban F1
BEACONS BANSHEE
Beacons Banshee (pages 68-71)
Banshee Beacons
Sirenco Beacons
Sirenco Xen & LED
Magnetic Base
Sirenco Rotating
Magnetic Base
EMErgENCy FLArE
Emergency Flare (pages 72-73)
Sirenco Emergency Flare
Sirenco Emergency Flare
6 Pack
IS POrTABLE BEACON
IS Portable Beacon (page 74)
Sirenco IS Portable Beacon
15
InDeX
OTHEr uNITS
Other units (page 75-76)
Hand Held Horn
School and Factory Timer
Megaphones
SON F1 rANgE
Son F1 range (page 77)
E2S Son F1 Sounder
A rANgE - SOuNdEr & COMBINATION uNITS
A range - Sounder and Combination units (page 78-82)
E2S A100 Sounder &
AL100 Combo
E2S A105 Sounder &
AL105 Combo
E2S A112 Sounder &
AL112 Combo
E2S A121 Sounder &
AL121 Combo
E2S A141 Sounder
E2S Ex 11 Sounder
EXPLOSION PrOOF dEVICES
Explosion Proof devices (page 83-91)
16
E2S Ex 05 Beacon
E2S Ex 10 Beacon
E2S Ex 15 Beacon
E2S Ex 1105 Combo
E2S Ex 12 Sounder
EX Break Glass Call
Point
EX Push Button
Call Point
EX Tool Reset Call
Point
InDeX
IS rANgE
IS range (page 92-99)
E2S IS Minialarm
Sounder
E2S IS Minialert
Combo
E2S IS Minialite
Beacon
IS Break Glass Call
Point
IS Push Button Call
Point
IS Tool Reset Call
Point
E2S IS A105 Sounder
E2S IS L101 Beacon
E2S Marine 10 Beacon
E2S Marine Combo
BEACONS E2S
Beacons E2S (page 100-101)
E2S LED Beacons
E2S Xenon Beacons
MArINE rANgE
Marine range (page 102-106)
E2S MA112 Marine
Sounder
E2S MA121 Marine
Sounder
E2S Marine 5 Beacon
17
INDEX
Son 4
Son 4 (page 107-108)
E2S Son 4 LED
E2S Son 4 Xenon
Appello range
Appello Range (page 109-110)
E2S A105 & AL105
Appello Speech & Tone
E2S A112 & AL112 Appello
Speech & Tone
GPH Horns
GPH Horns (page 111-112)
E2S GPH Horn
Surface Mount
E2S GPH Horn Flush
Mount
Hootronic
Hootronic (page 113-116)
E2S HMA121
Hootronic Sounder
18
E2S HMCA112
Hootronic Sounder &
Beacon Combo
E2S HA121
Hootronic Sounder
E2S HAL121 Hootronic
Sounder & Beacon Combo
InDeX
BEACONS SPECTrA
Beacons Spectra (page 117-141)
Spectra B100SLF Status
Filament Beacon
Spectra B100FLF Flashing
Filament Beacon
Spectra B100STR
Xenon Beacon
Spectra B100LDA
LED Beacon
Spectra B200SLF Status
Filament Beacon
Spectra B200FLF Flashing
Filament Beacon
Spectra B200STR
Xenon Beacon
Spectra B200LDA
LED Beacon
Spectra B300SLF
Status Filament Beacon
Spectra B300FLF
Blinking Filament Beacon
Spectra B300STR
Xenon Beacon
Spectra B300SLH Status
Halogen Beacon
Spectra B300FLH Blinking
Halogen Beacon
Spectra B300STS
Synchronised Beacon
Spectra B300STF Dual
Frequency Xenon Beacon
Spectra B300RTH Rotating Spectra B300LDA LED
Halogen Beacon
Multi-Function Array
Beacon
Spectra B400SLF
Status Filament Beacon
Spectra B400FLF
Blinking Filament Beacon
Spectra B400STR
Xenon Beacon
Spectra B400SLH Status
Halogen Beacon
Spectra B400STS
Synchronised
Xenon Beacon
Spectra B400RTH
Rotating Halogen Beacon
Spectra B400LDA LED
Multi-Function Array
Beacon
Spectra B400FLH Blinking
Halogen Beacon
19
InDeX
PANEL MOuNT INdICATOrS
Panel Mount Indicators (page 142-146)
E2S 22D Panel
Mount Indicators
E2S 28D Panel
Mount Buzzers
Sirenco Panel Mount
Indicators
Sirenco Panel Mount
Buzzer
Sirenco Panel Mount
Combination Unit
Spectra B450TLA
LED Array
Spectra B450TSB
Filament Lamp
Spectra B450TDB
Dual Filament
Spectra H110T Trumpet
Horn & H110TX Combo
Spectra Signal Tower
Stack Lights 70mm
TrAFFIC LIgHTS
Traffic Lights (page 147-151)
Spectra B350TLA
LED Array
Spectra B350TSB
Filament Lamp
SPECTrA SOuNdErS & COMBINATION uNITS
Spectra Sounders & Combination units (page 152-156)
Spectra B300SND &
B400SND sounder
Spectra H100B Horn &
H100BL Combo
Spectra H100T Trumpet
Horn & H100TX Combo
TurBO BLOWEr
Turbo Blower (page157-158)
Sirenco Petrol Engine
Powered Turbo Blower
Sirenco Electric
Powered Turbo Blower
VOLTAgE rEFErENCE:
In this catalogue the following voltages are compatable 220 Vac = 250 Vac, 380 Vac = 400 Vac and 525 Vac = 550 Vac
20
MOTORISED SIRENS
sIrenCo 500sL
VOLTAgE
VOLTAgE
12 VAC/dC
24 VAC/dC
110 VAC/dC
220 VAC/dC
MOTOrISEd SIrENS - SIrENCO 500SL
compact and powerful siren constructed from uV stabilised
polycarbonate. ideal for all signalling or alarm applications where a
lightweight motorised siren is required.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vac/dc
duTy CyCLE
5min on - 10min off
SOuNd OuTPuT
107 dB(A) at 1m
SOuNd FrEquENCy
1 400Hz
APP. rANgE
500m in still air on open field
CurrENT CONSuMPTION*
12V - 10.6A
IP rATINg
IP 45
WEIgHT
1.1kg
PACkINg dIMENSIONS
190x140x155mm
24 Vac/dc
24V - 7.5A
110 Vac/dc
220 Vac/dc
10V - 1.0A
220V - 0.7A
* start-up current x 8
21
Motorised Sirens
Sirenco 1000sl
Motorised Sirens - sirenco 1000sl
Compact and powerful siren constructed from a UV stabilised
polycarbonate. Ideal for all signalling or alarm applications where a
lightweight motorised siren is required.
Voltage
Voltage
12 Vac/dc
24 Vac/dc
110 Vac/dc
220 Vac/dc
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vac/dc
Duty Cycle
5min on - 10min off
Sound Output
114 dB(A) at 1m
Sound Frequency
1 000Hz
24 Vac/dc
App. Range
1 000m in still air on open field
Current Consumption*
12V - 17.4A
IP Rating
IP 45
Weight
1.2kg
Packing Dimensions
190x140x155mm
* Start-up current x 8
22
24V - 8.8A
110 Vac/dc
220 Vac/dc
110V - 1.9A
220V - 1.0A
MOTORISED SIRENS
bAnshee mono
VOLTAgE
VOLTAgE
12 VAC/dC
24 VAC/dC
110 VAC/dC
220 VAC/dC
MOTOrISEd SIrENS - BANSHEE MONO
a robust, pressure die cast aluminium siren with a powerful lower
frequency sound output. dual cable entry for looping cable connection.
back cover removes for easy access to do cable connection. universal
motor with replaceable parts. neat powder coated finish in grey is a
standard colour. ideal for signalling or alarm applications.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vac/dc
duTy CyCLE
1 minute on - 8 minutes off
SOuNd OuTPuT
113 dB(A) at 1m
SOuNd FrEquENCy
950-1 200Hz
APP. rANgE
1 000m in still air on open field
MOTOr
Brush motor with roller bearing & guide bush - 6400 rpm
CurrENT CONSuMPTION*
12V - 9A
IP rATINg
IP 65
WEIgHT
1.6kg
PACkINg dIMENSIONS
130x130x190mm
24 Vac/dc
24V - 6A
110 Vac/dc
110V - 1.5A
220 Vac/dc
220V - 0.5A
* start-up current x 8
23
Motorised Sirens
Banshee Duplo
Motorised Sirens - Banshee Duplo
A robust, pressure die cast aluminium siren with a powerful lower
frequency sound output. Dual cable entry for looping cable connections.
Back cover removes for easy access to do cable connection. Universal
motor with replaceable parts. Neat powder coated finish in yellow as a
standard colour. Ideal for signalling or alarm applications.
Voltage
Voltage
12 / 24 Vdc
110 Vac/dc
220 Vac/dc
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
10 Hours continuous
24 Vdc
110 Vac/dc
24V - 113 dB(A) at 1m
110/220V - 116 dB(A at 1m)
Sound Output
12V - 110 dB(A) at 1m
Sound Frequency
950 - 1 200Hz
App. Range
1 000m in still air on open field
Motor
Brush motor with double roller bearing - 8 000 rpm
Current Consumption*
12V - 3A
IP Rating
IP 65
Weight
2.5kg
Packing Dimensions
150x150x190mm
* Start-up current x 8
24
24V - 5.25A
110V - 2A
220 Vac/dc
220V - 1A
LONG RANGE SIRENS
a weatherproof, rugged cast aluminium siren with a very powerful low
frequency output. ideally suited for use in factories, refineries, quarries,
construction and industrial sites, as well as both underground and surface
non-fiery mines. thermal cut out protected.
VOLTAgE
VOLTAgE
110 VAC/dC
220 VAC/dC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
110 Vac/dc
duTy CyCLE
Continuous (thermal cut out protected)
SOuNd OuTPuT
122 dB(A) at 1m
SOuNd FrEquENCy
1 600Hz
APP. rANgE
1 500m in still air on open field
MOTOr
Brush motor with roller bearing
CurrENT CONSuMPTION*
110V - 5A
IP rATINg
IP 55 (IP 65 available on request)
WEIgHT
6.6kg
PACkINg dIMENSIONS
240x183x183mm
220 Vac/dc
220V - 3.5A
* start-up current x 8
25
LONg rANgE SIrENS - SIrENCO 1500S
sIrenCo 1500s
Long range Sirens
Sirenco 2d
Long range Sirens - sirenco 2d
Totally enclosed, robust, all weather cast aluminium siren with a very
powerful low dual frequency output. Ideally suited for use in factories,
refineries, quarries, constuction and industrial sites, as well as both
undergound and surface non-fiery mines. Thermal cut out protected.
Voltage
Voltage
110 Vac/dc
220 Vac/dc
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
110 Vac
Duty Cycle
Continuous (Thermal cut out protected)
220 Vac
Sound Output
121 dB(A) at 1m
Sound Frequency
370/660Hz
App. Range
2 000m in still air on open field
Motor
Brush motor with roller bearing - 4 000rpm
Current Consumption*
110V - 3A
IP Rating
IP 55 (IP 65 available on request)
Weight
8.2kg
Packing Dimensions
270x175x190mm
* Start-up current x 8
26
220V - 2.2A
LONG RANGE SIRENS
Very durable weather proof siren manufactured from the highest quality
cast aluminium with a very powerful low frequency output. ideally suited
for use in factories, refineries, quarries, construction and industrial sites,
as well as both underground and surface non-fiery mines.
VOLTAgE
VOLTAgE
220 VAC/dC
380 VAC (3ø)
525 VAC (3ø)
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
220 Vac
duTy CyCLE
Continuous
SOuNd OuTPuT
125 dB(A) at 1m
SOuNd FrEquENCy
560Hz
APP. rANgE
3 000m in still air on open field
MOTOr
1.1 KW motor - 2875 rpm
CurrENT CONSuMPTION*
220V - 9A
IP rATINg
IP 55 (IP 65 or IP 56 available on request)
WEIgHT
22kg
PACkINg dIMENSIONS
400x380x300mm
380 Vac (3ø)
380V - 5A
525 Vac (3ø)
525V - 2A
* start-up current x 8
27
LONg rANgE SIrENS - SIrENCO 3LF
sIrenCo 3LF
LONG RANGE SIRENS
sIrenCo 3LF VertICAL
LONg rANgE SIrENS - SIrENCO 3LF VErTICAL
durable weather proof siren manufactured from the highest quality cast
aluminium with a very powerful low frequency output. ideally suited for
use in factories, refineries, quarries, construction and industrial sites, as
well as both underground and surface non-fiery mines.
VOLTAgE
VOLTAgE
220 VAC/dC
380 VAC (3ø)
524 VAC (3ø)
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
220 Vac
duTy CyCLE
Continuous
SOuNd OuTPuT
125 dB(A) at 1m
SOuNd FrEquENCy
560Hz
APP. rANgE
3 000m in still air on open field
MOTOr
1.1 KW motor - 2875 rpm
380 Vac (3ø)
CurrENT CONSuMPTION*
220V - 9A
IP rATINg
IP 55 (IP 65 or IP 56 available on request)
WEIgHT
22kg
PACkINg dIMENSIONS
400x380x300mm
* start-up current x 8
28
380V - 5A
524 Vac (3ø)
524V - 2A
LONG RANGE SIRENS
total robust, rugged cast aluminium siren with a very powerful low
frequency output. ideally suited for use in factories, refineries, quarries,
construction and industrial sites, as well as both underground and surface
non-fiery mines.
VOLTAgE
VOLTAgE
220 VAC/dC
380 VAC (3ø)
525 VAC (3ø)
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
220 Vac
duTy CyCLE
Continuous
SOuNd OuTPuT
130 dB(A) at 1m
SOuNd FrEquENCy
560Hz
APP. rANgE
5 000m in still air on open field
MOTOr
2.2KW motor - 2 875rpm
CurrENT CONSuMPTION*
220V - 9.5A
IP rATINg
IP 55 (IP 65 or IP 56 available on request)
WEIgHT
50kg
PACkINg dIMENSIONS
500x450x420mm
380 Vac (3ø)
380V - 5A
525 Vac(3ø)
525V - 3A
* start-up current x 8
29
LONg rANgE SIrENS - SIrENCO 5S
sIrenCo 5s
Long range Sirens
Sirenco 10S
long Range Sirens - Sirenco 10S
Precision machined aluminium body with all weather enclosed,
continuously rated motor. Ideally suited for use in factories, refineries,
quarries, construction civil defence and industrial sites, as well as both
underground and surface non-fiery mines.
Voltage
Voltage
380 Vac (3ø)
525 Vac (3ø)
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
380 Vac (3ø)
Duty Cycle
Continuous
Sound Output
140 dB(A) at 1m
Sound Frequency
560Hz
App. Range
10 000m in still air on open field
525 Vac (3ø)
Motor
4 KW motor - 2875 rpm
Current Consumption*
380V - 10A
IP Rating
IP 55 (IP 65 or IP 56 available on request)
Weight
68kg
Packing Dimensions
600x480x500mm
* Start-up current x 8
30
525V - 6A
LONG RANGE SIRENS
all-weather enclosed motor is ideally suited for outdoor use. this siren
would be used for audible warning at mines, industries and refineries, oil
rigs, in the event of fires and open-cast mining operations. this precision
machined unit produces a powerful low dual frequency sound that is
ideal for long distance signalling.
VOLTAgE
VOLTAgE
380 VAC (3ø)
525 VAC (3ø)
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
380 Vac (3ø)
duTy CyCLE
Continuous
SOuNd OuTPuT
145 dB(A) at 1m
SOuNd FrEquENCy
480/560Hz
APP. rANgE
15 000m in still air on open field
MOTOr
7.5KW motor - 2875rpm
CurrENT CONSuMPTION*
380V - 15A
IP rATINg
IP 55 (IP 65 or IP 56 available on request)
WEIgHT
118kg
PACkINg dIMENSIONS
600x650x500mm
525 Vac (3ø)
525V - 11A
* start-up current x 8
31
LONg rANgE SIrENS - SIrENCO 15d
sIrenCo 15D
Long range Sirens
long Range Sirens - Sirenco ANTI-ICING
Sirenco ANTI-ICING
The Anti-Icing unit is ideally suited for outdoor use in extreme cold conditions. This Anti-Icing unit is used in conjunction with the
Sirenco 5S, 10S and 15D at refineries. The Anti-Icing unit has an element mounted in the housing of the siren, this prevents the siren
from freezing to allow the siren to run according to specification.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
All dimensions in mm
Specifications
Voltage
220Vac
Duty Cycle
Continuous
Current Consumption
The 220V anti icing unit will run from a 15 Amp power supply. At the lowest setting the unit will maintain
the siren temperature at approximately 15ºC and consume about 1.3 Amps. Should ambient conditions
increase in demand, a higher temperature can be adjusted by a control knob.
IP Rating
IP 65
Fitting
The elements are fitted into the back of the impeller housing. This is done during the Manufacturing
process of the siren. The unit cannot be fitted on existing sirens and should be ordered separately as an
additional feature.
Mounting
Anti-Icing units are mounted on request; heating elements are embedded in the impeller housing. The
temperature is controlled to prevent the unit from icing up, when ambient temperature drops below
freezing.
Heating Element
The element temperature is controlled by a solid state relay and can be set to keep the unit between 8ºC
and 15ºC.
Power Supply
The power supply to the heating element is constantly on and is independent from the power supply that
activates the siren. Two separate power supplies are to be installed.
32
LONG RANGE SIRENS
LONg rANgE SIrENS - SIrENCO SHuTTEr VALVE
sIrenCo shUtter VALVe
Please visit our website for all the latest information,
www.kama.co.za.
220Vac Supply
6
145
500
85
All dimensions in mm
SPECIFICATIONS
VOLTAgE
220V
CurrENT CONSuMPTION
220V - 1A
IP rATINg
IP 55
33
Hand Operated Sirens
Sirenco H100
Hand Operated Siren - Sirenco H100
This cast aluminium siren is designed as a backup alarm when there is
a power failure or applications in remote areas where no electricity is
available, blasting sites etc. This is a simple, maintenance free siren with a
sealed gearbox.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
Hand Operated
Sound Output
105 dB(A) at 1m
Sound Frequency
500Hz
App. Range
500m in still open field
Motor
Sealed gearbox crank handle with ratchet
Weight
1.2kg
Packing Dimensions
15.5x15.5x16mm
34
HAND OPERATED SIRENS
this cast aluminium siren is designed as a backup alarm when there is
a power failure or applications in remote areas where no electricity is
available, blasting sites etc. this is a simple, maintenance free siren with
a sealed gearbox. the lightweight tripod stand can be folded up for easy
transport and is height adjustable.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
Hand Operated
SOuNd OuTPuT
112 dB(A) at 1m
SOuNd FrEquENCy
500Hz
APP. rANgE
1 000m in still air on open field
MOTOr
Sealed gearbox crank handle with ratchet
WEIgHT
5.1kg
PACkINg dIMENSIONS
660x300x230mm
35
HANd OPErATEd SIrEN - SIrENCO H150 TrIPOd
sIrenCo h150 trIPoD
Hand Operated Sirens
Sirenco H200
Hand operated Sirens - Sirenco H200
This cast aluminium siren is designed as a backup alarm when there
is a power failure or applications in remote areas where no electricity
is available, blasting sites etc. The handle on top of the siren can be
selected to alter the sound output. This is a simple, maintenance free
siren with a sealed gearbox.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
Hand Operated
Sound Output
120 dB(A) at 1m
Sound Frequency
500Hz
App. Range
2 000m in still air on open field
Motor
Sealed gearbox crank handle with ratchet
Weight
12kg
Packing Dimensions
560x360x450mm
36
HAND OPERATED SIRENS
sIrenCo eX h200
HANd OPErATEd SIrENS - SIrENCO EX H200
the sirenco ex H200 model is a cast aluminium siren, designed as a
backup alarm when there is a power failure or applications in remote
areas where no electricity is available, ex areas etc. the handle on top
of the siren can be oscillated to alter the sound output. this is a simple,
maintenance free siren with a sealed gearbox.
Please visit our website for all the latest information,
www.kama.co.za.
30
45
140
R95
323
156
17
300
223
All dimensions in mm
SPECIFICATIONS
VOLTAgE
Hand Operated
SOuNd OuTPuT
120 dB(A) at 1m
SOuNd FrEquENCy
500Hz
APP. rANgE
2 000m in still air on open field
MOTOr
Sealed gearbox crank handle with ratchet
CLASSIFICATION
EX s 1/2 T6 Gb Db
CErTIFICATION
SAEX MS/11-052X
gAS grOuP
I, II
IgNITION grOuP
T6 - 85ºC
WEIgHT
13.5kg
PACkINg dIMENSIONS
560mmx360mmx450mm
37
Other Sirens
Sirenco Air Operated
Other Sirens - Sirenco Air Operated
Robust aluminium siren with an air operated motor. Designed for
applications where a siren is required and air pressure is available, i.e.
earth moving machines and other pneumatically operated equipment.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
Self cooling air driven motor
Duty Cycle
Continuously rated
Sound Output
117 dB(A) at 1m
Sound Frequency
500Hz
App. Range
1 500m in still air on open field
Motor
Air driven motor
Air Pressure
7 bar (100psi) max
IP Rating
IP 44
Weight
2kg
Packing Dimensions
175x165x200mm
38
OTHER SIRENS
sIrenCo hyDrAULIC sIren
OTHEr SIrENS - SIrENCO HydrAuLIC SIrEN
durable all-weather aluminium siren with a hydraulic motor. designed
for applications where a siren is required and hydraulic oil pressure is
available, i.e. hydraulic operated earth moving machines and other
hydraulically operated equipment.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
Hydraulic motor
duTy CyCLE
Continuously rated
SOuNd OuTPuT
117 dB(A) at 1m
SOuNd FrEquENCy
500Hz
APP. rANgE
1 500m in still air on open field
MOTOr
Hydrostatically balanced hydraulic motor with automatic lateral adjustment
HydrAuLIC PrESSurE
240 bar max - Continuous 275 bar max - Intermittent
IP rATINg
IP 44
WEIgHT
4kg
PACkINg dIMENSIONS
175x 65x200mm
39
hooters
Sirenco Air Horn 370 Hz
hooters - Sirenco Air Horn 370 Hz
Robust aluminium siren with an air operated motor. Designed for
applications where a siren is required and air pressure is available, i.e.
earth moving machines and other pneumatically operated equipment.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
Air driven diaphragm
Duty Cycle
Continuously rated
Sound Output
138 dB(A) at 1m
Sound Frequency
370Hz
App. Range
3 000m in still air on open field
Motor
Air driven diaphragm
Air Pressure
7 bar or between 350 to 1000 Kpa
IP Rating
IP 44
Weight
2.8kg
Packing Dimensions
210x340x190mm
40
HOOTERS
the air horn is precision machined from an aluminium casting
designed to withstand the rigours normally encountered in commercial
applications. air horns have been specially designed to meet the warning
needs for the south african transport, marine and industrial applications.
a High frequency air operated device with excellent sound penetration.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
Air driven diaphragm
duTy CyCLE
Continuously rated
SOuNd OuTPuT
138 dB(A) at 1m
SOuNd FrEquENCy
660Hz
APP. rANgE
3 000m in still air on open field
MOTOr
Air driven diaphragm
HydrAuLIC PrESSurE
7 bar or between 350 to 1 000 Kpa
IP rATINg
IP 44
WEIgHT
2.4kg
PACkINg dIMENSIONS
205x325x180mm
41
HOOTErS - SIrENCO AIr HOrN 660 Hz
sIrenCo AIr horn 660 hz
HOOTERS
sIrenCo motorIseD hooter
HOOTErS - SIrENCO MOTOrISEd HOOTEr
the air horn is precision machined from an aluminium casting
designed to withstand the rigours normally encountered in commercial
applications. air horns have been specially designed to meet the warning
needs for the south african transport, marine and industrial applications.
a High frequency air operated device with excellent sound penetration.
VOLTAgE
VOLTAgE
12 VdC
110 VAC
24 VdC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
1 minute on - 8 minutes off
SOuNd OuTPuT
120 dB(A) at 1m
SOuNd FrEquENCy
1 300Hz
APP. rANgE
2 000m
CurrENT CONSuMPTION
12Vdc - 5A
IP rATINg
IP 45
WEIgHT
3kg
PACkINg dIMENSIONS
29.5mmx29.5mmx15.5mm
42
24 Vdc
110 Vac
220 Vac
24Vdc - 2.3A
110Vac - 0.84A
220Vac - 0.76A
HOOTERS
sIrenCo he36 hooter
VOLTAgE
VOLTAgE
12 VAC
24 VAC
110 VAC
220 VAC
HOOTErS - SIrENCO HE36 HOOTEr
this electric horn is suitable for applications where a low frequency
sound is required. this hooter is often used as an extension bell for
telephone systems and can be connected to a telephone line and will
trigger the horn with 220 Vac when a ring is detected on the telephone
line.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vac
duTy CyCLE
Continuously rated
SOuNd OuTPuT
105 dB(A) at 1m
SOuNd FrEquENCy
550Hz
APP. rANgE
500m in still air on open field
MOTOr
Moving coil diaphragm
CurrENT CONSuMPTION
12V - 5.3A
IP rATINg
IP 44
WEIgHT
1.1kg
PACkINg dIMENSIONS
375x150x150mm
24 Vac
24V - 2.7A
110 Vac
220 Vac
110V - 0.5A
220V - 0.3A
43
hooters
Telkom Relay
Hooters - Telkom Relay
The Telkom relay works in conjunction with the HE36 hooter or any
other instantaneous operating device. The relay detects the ring signal
on a telephone line and is used to pulse the hooter to give the “ringing”
effect when triggered.
Voltage
Voltage
220 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
220 Vac and trigger voltage supplied via telephone line
Operating Area
Indoor use only
IP Rating
IP 44
Weight
250g
Packing Dimensions
110x70x60mm
44
BELLS
the innovative and durable range of motor driven fire alarm bells offers
an excellent sonorous tone, high sound output and proven reliability.
the 150 mm version features the revolutionary aluminium gong offering
enhanced acoustics and greater sound output.
VOLTAgE
VOLTAgE
12 VAC
12 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
duTy CyCLE
Continuously rated
SOuNd OuTPuT
95 dB(A) at 1m
SOuNd FrEquENCy
1 100Hz
APP. rANgE
300m in still air on open field
CurrENT CONSuMPTION
24Vdc - 11mA
IP rATINg
IP 44
WEIgHT
420g
PACkINg dIMENSIONS
160x160x60mm
24 Vac
24Vac - 16mA
110 Vac
220 Vac
110V - 25mA
220V - 20mA
45
BELLS - SIrENCO 6” BELL
sIrenCo 6” beLL
Bells
Sirenco Solenoid Bell
bells - Sirenco Solenoid Bell
The innovative and durable range of solenoid reliability. The 150mm
version features the solenoid with plunger hitting the steel powder
coated gong offering enhanced acoustics and greater sound output.
Voltage
Voltage
24 Vdc
24 Vac
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 Vdc
Duty Cycle
Continuously rated
24 Vac
Sound Output
106 dB(A) at 1m
Sound Frequency
1 100Hz
App. Range
600m in still air on open field
Current Consumption
24Vdc- 25mA
IP Rating
IP 44
Weight
420g
Packing Dimensions
160x180x110mm
46
24Vac - 25mA
110 Vac
220 Vac
110V - 25mA
220V - 25mA
BELLS
sIrenCo soLenoID beLL - sIngLe stroke
VOLTAgE
VOLTAgE
110 VdC
-
BELLS - SIrENCO SOLENOId BELL - SINgLE STrOkE
this innovative and durable range of solenoid bells offers a high sound
output and proven reliability. the 150 mm version features the solenoid
with plunger hitting the steel powder coated gong offering enhanced
acoustics and greater sound output.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
110 Vdc (Single Stroke)
duTy CyCLE
Continuously rated
SOuNd OuTPuT
106 dB(A) at 1m
SOuNd FrEquENCy
1 100 Hz
APP. rANgE
600m in still air on open field
CurrENT CONSuMPTION
110V - 25mA
IP rATINg
IP 44
WEIgHT
420g
PACkINg dIMENSIONS
160x180x110mm
47
Flame Proof Devices
BANSHEE EX MONO SIREN S1
Flame Proof Devices - BANSHEE EX MONO SIREN S1
This motorised siren is suitable for use in fiery mines as well as
petrochemical plants and areas where an explosion-protected device is
required. Please ensure that the unit is equipped with the correct flame
proof cable gland. The unit consists of a 304 type stainless steel housing
with a M20 cable entry, a stainless steel nose cone and a unique screw on
lid for cable connection.
Voltage
Voltage
12 Vac/dc
24 Vac/dC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vac/dc
Duty Cycle
1 min. on and 8 min. off
Sound Output
113 dB(A) at 1m
Sound Frequency
950 - 1 200Hz
24 Vac/dc
App. Range
600m in still air on open field
Current Consumption*
12V - 9A
Classification
Exd I / IIC 150°
Certification
MS - XPL / 06849
Gas Groups
I, IIA, IIB, IIC
Ignition Group
T6 - 85°C
Weight
11,3kg
Packing Dimensions
200x250x200mm
* Start-up current x 6
48
24V - 4.8A
FLAME PROOF DEVICES
this motorised siren is suitable for use in fiery mines as well as
petrochemical plants and areas where an explosion-protected device is
required. Please ensure that the unit is equipped with the correct flame
proof cable gland. the unit consists of a 304 type stainless steel housing
with a m20 cable entry, a stainless steel nose cone and a unique screw on
lid for cable connection.
VOLTAgE
VOLTAgE
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
110 Vac
duTy CyCLE
10 hours Continuous
SOuNd OuTPuT
116 dB(A) at 1m
SOuNd FrEquENCy
950 - 1 200Hz
APP. rANgE
1 000m in still air on an open field
CurrENT CONSuMPTION*
110V - 2A
CLASSIFICATION
Exd I / IIC 150°
CErTIFICATION
MS - XPL / 06849
gAS grOuPS
I, IIA, IIB, IIC
IgNITION grOuP
T6 - 85°C
WEIgHT
11,3kg
PACkINg dIMENSIONS
200x250x200mm
220 Vac
220V - 1A
* start-up current x 6
49
FLAME PrOOF dEVICES - BANSHEE EX duPLO SIrEN S1
bAnshee eX DUPLo sIren s1
Flame Proof Devices
Banshee EX Multi Sounder S1
Flame Proof Devices - Banshee EX Multi Sounder S1
This electronic sounder is suitable for use in fiery mines as well as
petrochemical plants and areas where an explosion-protected device is
required. Please ensure that the unit is equipped with the correct flame
proof cable gland. The unit consists of a 304 type stainless steel housing
with a M20 cable entry, a stainless steel nose cone and a unique screw on
lid for cable connection.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
Continuous rated
24 Vdc
110 Vac
Sound Output
110 dB(A) at 1m
Sound Frequency
800 - 2 400Hz
App. Range
800m in still air on an open field
Current Consumption
The amps vary from 40 - 70mA depending on the sound selection
Classification
Exd I / IIC 150°
Certification
MS - XPL / 06849
Gas Groups
I, IIA, IIB, IIC
Ignition Group
T6 - 85°C
Weight
11,3kg
Packing Dimensions
200x250x200mm
50
DIP A21 (for group 21)
220 Vac
FLAME PROOF DEVICES
this xenon beacon is suitable for use in fiery mines as well as
petrochemical plants and areas where an explosion-protected device
is required. Please ensure that the unit is equipped with the correct
flameproof cable gland. the unit consists of a 304 type stainless steel
housing with a m20 cable entry, a stainless steel nose cone and a unique
screw on lid for cable connection.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous rated
CurrENT CONSuMPTION
12V - 250mA
COLOur
Amber, Red, Blue and Green (other colours available on request)
LIgHT SOurCE
Xenon Tube
LIgHT OuTPuT
5 Joule
CLASSIFICATION
Exd I / IIC 150°
CErTIFICATION
MS - XPL / 06849
gAS grOuPS
I, IIA, IIB, IIC
IgNITION grOuP
T6 - 85°C
WEIgHT
11,3kg
PACkINg dIMENSIONS
200x250x200mm
24 Vdc
110 Vac
220 Vac
24V - 130mA
110V - 80mA
220V - 50mA
DIP A21 (for group 21)
51
FLAME PrOOF dEVICES - BANSHEE EX XENON BEACON S1
bAnshee eX Xenon beACon s1
Flame Proof Devices
Banshee EX LED Beacon S1
Flame Proof Devices - Banshee EX LED Beacon S1
This LED beacon is suitable for use in fiery mines as well as petrochemical
plants and areas where an explosion-protected device is required. Please
ensure that the unit is equipped with the correct flameproof cable gland.
The unit consits of a 304 type stainless steel housing with a M20 cable
entry, a stainless steel nose cone and a unique screw on lid for cable
connection.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
Continuous rated
24 Vdc
110 Vac
220 Vac
24V - 125mA
110V - 60mA
220V - 45mA
Current Consumption
12V - 150mA
Colour
Amber, Red, Blue and Green
light source
24 Hi-Bright LEDs
Light output
5 Joule
Classification
Exd I / IIC 150°
Certification
MS - XPL / 06849
Gas Groups
I, IIA, IIB, IIC
Ignition Group
T6 - 85°C
Weight
9,5kg
Packing Dimensions
220x250x220mm
52
DIP A21 (for group 21)
FLAME PROOF DEVICES
this Led siren is suitable for use in fiery mines as well as petrochemical
plants and areas where an explosion-protected device is required. Please
ensure that the unit is equipped with the correct flameproof cable gland.
the unit consits of a 304 type stainless steel housing with a m20 cable
entry, a stainless steel nose cone and a unique screw on lid for cable
connection.
VOLTAgE
VOLTAgE
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
110 Vac
duTy CyCLE
Continuous rated
CurrENT CONSuMPTION*
110V - 2.6A
SOuNd OuTPuT
122 dB (A) at 1m
SOuNd FrEquENCy
1 600Hz
APP. rANgE
1 500m in still air on open field
CLASSIFICATION
Exd I / IIC 150°
CErTIFICATION
MS - XPL / 06849
gAS grOuPS
I, IIA, IIB, IIC
IgNITION grOuP
T6 - 85°C
WEIgHT
13kg
PACkINg dIMENSIONS
220x250x220mm
220 Vac
220V - 2.1A
* start-up current x 6
53
FLAME PrOOF dEVICES - BANSHEE EX 26S SIrEN S1
bAnshee eX 26s sIren s1
Flame Proof Devices
Banshee EX 26D Siren S1
Flame Proof Devices - Banshee EX 26D Siren S1
This motorised siren is suitable for use in fiery mines as well as
petrochemical plants and areas where an explosion-protected device
is required. Please ensure that the unit equipped with the correct
flameproof cable gland. The unit consists of a 304 type stainless steel
housing with a M20 cable entry, a stainless steel nose cone and a unique
screw on lid for cable connection.
Voltage
Voltage
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
110 Vac
Duty Cycle
Continuous (thermal cut out protection)
Current Consumption*
110V - 4A
Sound Output
121 dB (A) at 1m
220 Vac
220V - 3A
Sound Frequency
370 / 660Hz
App. Range
2 000m in still air on open field
Motor
Brush motor with roller bearings - 4 000 rpm
Classification
Exd I / IIC 150°
Certification
MS - XPL / 06849
Gas Groups
I, IIA, IIB, IIC
Ignition Group
T6 - 85°C
Weight
16kg
Packing Dimensions
200x250x200mm
* Start-up current x 6
54
FLAME PROOF DEVICES
this electronic sounder and Led beacon combination unit is suitable for
use in fiery mines as well as petrochemical plants and areas where an
explosion-protected device is required. the unit consits of a 304 type
stainless steel housing with a m20 cable entry, a stainless steel nose cone
and a unique screw on lid for cable connection.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous rated
CurrENT CONSuMPTION
The amps vary from 80 - 250 mA depending on sound selected
COLOur
Red, Amber, Blue and Green
APP rANgE
800m in still air on open field
LIgHT SOurCE
24 Hi-Bright LEDs
SOuNd OuTPuT
113 dB (A) at 1m
CLASSIFICATION
Exd I / IIC 150°
CErTIFICATION
MS - XPL / 06849
gAS grOuPS
I, IIA, IIB, IIC
IgNITION grOuP
T6 - 85°C
WEIgHT
11,3kg
PACkINg dIMENSIONS
320x220x220mm
24 Vdc
110 Vac
220 Vac
220 V - 2.1 A
55
FLAME PrOOF dEVICES - BANSHEE EX MuLTI SOuNdEr & BEACON LEd COMBO S1
bAnshee eX mULtI soUnDer & beACon LeD
Combo s1
Flame Proof Devices
Banshee EX Multi Sounder & Beacon Xenon Combo
Flame Proof Devices - Banshee EX Multi Sounder & Beacon Xenon Combo
This electronic sounder and Xenon beacon combination is suitable
for use in fiery mines as well as petrochemical plants and areas where
an explosion-protected deviceis required. Please ensure that the unit
equipped with the correct flameproof cable gland. The unit consits of a
304 type stainless steel housing with a M20 cable entry, a stainless steel
nose cone and a unique screw on lid for cable connection.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
Continuous rated
24 Vdc
110 Vac
Sound Output
113 dB (A) at 1m
Colour
Amber, Red, Blue and Green (other colours available on request)
Light Source
Xenon Tube
App. Range
800m in still air on an open field
Current Consumption
The amps vary from 80 - 250mA depending on the sound selection
Classification
Exd I / IIC 150°
Certification
MS - XPL / 06849
Gas Groups
I, IIA, IIB, IIC
Ignition Group
T6 - 85°C
Weight
11,3kg
Packing Dimensions
200x250x200mm
56
DIP A21 (for group 21)
220 Vac
FLAME PROOF DEVICES
bAnshee eX mono sIren & beACon LeD/Xenon
Combo s1
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
FLAME PrOOF dEVICES - BANSHEE EX MONO SIrEN & BEACON LEd/XENON COMBO S1
this mono siren and Led beacon combination unit is suitable for use
in fiery mines as well as petro chemical plants and areas where an
explosion-protected device is required. Please ensure that the unit is
equipped with the correct flameproof cable gland. the unit consists of
a steel nickel plated housing with 3 x m20 cable entries, a stainless steel
nose cone and a unique screw on lid for cable connection.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
1 min on - 8min off
24 Vdc
110 Vac
220 Vac
24V - 6A
110V - 2A
220V - 1,5A
CurrENT CONSuMPTION*
12V - 10A
COLOur
Amber, Red, Blue and Green (other colours available on request)
LIgHT SOurCE
Xenon Tube / 24 x LEDs
SOuNd OuTPuT
App Range 1000 m in still open field
LIgHT OuTPuT
5 Joule
CLASSIFICATION
Exd I / IIC 150°
CErTIFICATION
MS - XPL / 06849
gAS grOuPS
I, IIA, IIB, IIC
IgNITION grOuP
T6 - 85°C
WEIgHT
11,3kg
PACkINg dIMENSIONS
200x250x200mm
* start-up current x 8
DIP A21 (for group 21)
57
Flame Proof Devices
Banshee Ex Duplo Siren & Beacon Xenon / LED Combo S1
Flame Proof Devices - Banshee Ex Duplo Siren & Beacon Xenon / LED Combo S1
This duplo siren and Xenon / LED beacon combination unit is suitable
for use in fiery mines as well as petro chemical plants and areaswhere
an explosion-protected device is required. Please ensure that the unit is
equipped with the correct flameproof cable gland. The unit consists of
a steel nickel plated housing with 3 x M20 cable entries, a stainless steel
nose cone and a unique screw on lid for cable connection.
Voltage
Voltage
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
10 hours Continuous rated
Sound Output
116 dB(A) at 1m
Sound Frequency
800-2 400Hz
24 Vdc
110 Vac
App. Range
1 000m in still air on an open field
Current Consumption*
The amps vary from 1 - 2A depending on the sound selection
Classification
Exd I / IIC 150°
Certification
MS - XPL / 06849
Gas Groups
I, IIA, IIB, IIC
Ignition Group
T6 - 85°C
Weight
11,3kg
Packing Dimensions
200x250x200mm
* Start-up current x 8
58
DIP A21 (for group 21)
220 Vac
FLAME PROOF DEVICES
the ex Light s1 is suitable for use in fiery mines, petro chemical plants,
underground coal mining machinery and areas where an explosionprotected devices is required. Please ensure that the unit is equipped
with the correct flame proof cable gland. the unit consists of a 304
type stainless steel body with a m20 cable entry, unique screw on lid
for cable connection. the unit boasts 7 super-bright Led’s that emit 112
lux at 5m. Long life Led technology allows for longevity and low power
consumption. avaliable with different colour lenses.
VOLTAgE
VOLTAgE
12 VdC
220 VAC
*other voltage
avaliable on request
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
CLASSIFICATION
Exd I 150°C
CErTIFICATION
SAEX MS/11-110X
gAS grOuPS
I, IIC
220 Vac
Ex d IIC T4 Gb
LIgHT SOurCE
4 x Super Bright LED’s (5W)
7 x Super Bright LED’s (7W)
LIgHT OuTPuT
49 LUX at 5m
118 LUX at 5m
72mA
CurrENT CONSuMPTION
28mA
IgNITION grOuP
T6 - 85°C
WEIgHT
± 6kg
PACkINg dIMENSIONS
270x200x230mm
59
FLAME PrOOF dEVICES - BANSHEE EX LIgHT S1
bAnshee eX LIght s1
Flame Proof Devices
Banshee EX Floodlight s1
Flame Proof Devices - Banshee EX Floodlight S1
The Ex Floodlight S1 is sutable for use in fiery mines, petro chemical
plants, underground coal mining machinery and areas where an
explosion-protected devices is required. Please ensure that the unit is
equipped with the correct flame proof cable gland. The unit consists of a
304 type stainless steel body with a M20 cable entry, a stainless steel nose
cone and a unique screw on lid for cable connection. The unit boasts
12 super-bright LED’s that emit 190 lux at 5m. Long life LED technology
allows for longevity and low power consumption.
Voltage
Voltage
12 V
220 V
*other voltage
avaliable on request
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Colours
Red, Green and White
Classification
Exd I 150°C Mb
Certification
SAEX MS/11-402X
220 Vac
Ex d IIC T4 Gb
Light Sources
12 Super Bright LED’S (12W)
12 Super Bright LED’S (12W)
Light Output
125 LUX at 5m
190 LUX at 5m
CUrrent consumption
97mA
111mA
Gas Groups
I, IIC
Ignition Group
T6 - 85°C
Weight
± 11kg
Packing Dimensions
270x200x230mm
60
FLAME PROOF DEVICES
bAnshee eX termInAL boX s1
FLAME PrOOF dEVICES - BANSHEE EX TErMINAL BOX S1
the ex terminal box s1 can be used in most ex environments for
flameproof wiring terminations. the unit is made of 304 type stainless
steel. the unit screws into m20 hole.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
TyPE
EX Terminal Box S1
CLASSIFICATION
Exd I 150°C
CErTIFICATION
SAEX MS/11-349
gAS grOuPS
I, IIA. IIB, IIC
IgNITION grOuP
T6 - 85°C
WEIgHT
1.7kg
PACkINg dIMENSIONS
121x117x130mm
Ex d IIC T4 Gb
61
Combination Units
Banshee Mono combo ml & MX
Combination Units - Banshee Mono combo Ml & Mx
The Mono siren with all its features is used with a flashing beacon
mounted on the back cover. This unit is designed for applications
where an audible and visual signal device is required. The beacon starts
flashing when the siren is supplied with power. With a separate supply
through the second cable entry the beacon can be connected to operate
independently from the siren.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
1 minute on - 8 mintues off
Sound Output
113 dB(A) at 1m
Sound Frequency
950-1 200Hz
24 Vdc
App. Range
1 000m in still air on an open field
Current Consumption*
12V - 10A
24V - 6A
Light Source
24 Hi-bright LED’s / Xenon tube - 5 Joule
IP Rating
IP 65
Weight
2.5kg
Packing Dimensions
140x140x270 mm
* Start-up current x 8
62
110 Vac
220 Vac
110V - 2A
220V - 1.5A
COMBINATION UNITS
the duplo siren with all its features is used with a flashing beacon
mounted on the back cover. this unit is designed for applications
where an audible and visual signal device is required. the beacon starts
flashing when the siren is supplied with power. with a separate supply
through the second cable entry the beacon can be connected to operate
independently from the siren.
VOLTAgE
VOLTAgE
-
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
duTy CyCLE
10 Hours continuous rated
SOuNd OuTPuT
116 dB(A) at 1m
SOuNd FrEquENCy
950-1 200Hz
APP. rANgE
1 000m in still air on an open field
MOTOr
Brush motor with double roller bearing - 8 000 rpm
110 Vac
CurrENT CONSuMPTION*
24Vdc - 6A
LIgHT SOurCE
24 Hi-bright LEDs / Xenon tube
IP rATINg
IP 65
WEIgHT
2.5kg
PACkINg dIMENSIONS
140 x140x270mm
110V - 2.5A
220 Vac
220 V - 1.5A
* start-up current x 8
63
COMBINATION uNITS - BANSHEE duPLO COMBO dL & dX
bAnshee DUPLo Combo DL & DX
Combination Units
Banshee Flashtone Excel lite
Electronic sounders - Banshee flashtone Excel lite
The Banshee Flashtone Excel Lite combines the modern aesthetics of the
Banshee Excel sounder with a very bright and efficient Xenon beacon
to create a strobe/sounder combination. The Banshee Excel will suit the
majority of fire and security needs where conventional sound requires
the back up of a visual alarm.
Voltage
Voltage
9-30 Vdc
110 VAc
220 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
9 – 30 Vdc
Colours
Amber, Yellow, Red, Green and Blue
Duty Cycle
Continuous
Sound Output
110dB
Sound Frequency
420 - 2 900Hz
App. Range
800m in still air on an open field
110Vac Current Consumption
12V - 90mA
24V - 40mA
IP Rating
IP 45 Standard base
IP 66 Deep base
Weight
220g
Packing Dimensions
100x100x100mm
64
220Vac
ELECTRONIC SOUNDERS
bAnshee mULtItone eXCeL
VOLTAgE
VOLTAgE
9-30 VdC
110 VdC
220 VAC
-
ELECTrONIC SOuNdErS - BANSHEE MuLTITONE EXCEL
the banshee multitone excel represents the most modern, acoustically
advanced range of electronic sounders. it comes with 32 user selectable
tones incorporating low/high frequencies. the excel is renowned for
its 360º sound dispersal. the sound output can be decreased by means
of dipswitches in the base of the unit. units are available in red, grey &
white.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
9 – 30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
110dB
SOuNd FrEquENCy
420 - 2 900Hz
APP. rANgE
800m in still air on an open field
CurrENT CONSuMPTION
Max. 40mA
IP rATINg
IP 45 Standard base
WEIgHT
200g
PACkINg dIMENSIONS
100x100x100mm
110Vac
220Vac
IP 66 Deep base
65
Electronic Sounders
Banshee cybertone
electronic sounders - Banshee Cybertone
A durable panel mount sounder with the variable moving coil diaphragm
sound capsule. This sounder will outlast most other panel mount
sounders. The 4 sounds can be selected, depending on the way the model
is connected. A connecting diagram is included with each model.
Voltage
Voltage
12 Vdc
24 VAC/dc
32 VAC/dc
110/220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
Continuous rated
24 Vdc
Sound Output
91 dB(A) at 1m
Sound Frequency
2500 - 3000Hz
App. Range
400m in still air on an open field
Sound select
4 sounds selectable
Current Consumption
12V - 30mA
IP rating
IP 45
Weight
64g
Packing Dimensions
52x47x47mm
66
24V - 25mA
110 Vac
220 Vac
32V - 25mA
110/220 V on request
ELECTRONIC SOUNDERS
these units have been designed to perform at a maximum capacity for
as long as required. the sound output can be decreased by means of a
volume control. increased protection can be achieved by the use of a wr
kit which needs to be ordered with the unit.
VOLTAgE
VOLTAgE
10-30 VdC
24 VAC
110/220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
100 dB(A) at 1m
SOuNd FrEquENCy
340 / 2 400Hz (depends on tone selection)
SOuNd SELECT
10 user selectable tones with a 2 stage alarm option
APP. rANgE
300m in still air on an open field
24 Vac
CurrENT CONSuMPTION
10-30V - 25mA
IP rATINg
IP 55 - can be increased to IP 56 with WR kit
WEIgHT
260g
PACkINg dIMENSIONS
110x110x65mm
24V - 40mA
110/220 Vac
110/220V - 30mA
67
ELECTrONIC SOuNdErS - BAN F1 SOuNdEr
bAn F1 soUnDer
Beacons
Banshee LED & Xenon Beacons
beacons - Banshee LED & Xenon Beacons
Available in a Xenon and LED version. The units are designed to produce
approximately 45 to 65 flashes per minute and this is determined by a
variation in the voltage supplied. The LED units can be selected to be a
static or flashing beacon by a jumper on the circuit board. The extremely
robust dome make this one of the strongest beacons on the market.
Voltage
Voltage
12 Vdc
24 Vdc
110/220 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Colour LED
Red, Amber and Green
Colour Xenon
Red, Amber, Green and Blue
Light source LED
24 Hi-bright LED’s
Light source Xenon
Xenon tube - 5 Joules
flash Rate
LED - approximately 50 / min; Xenon - 45 to 60/ min
24 Vdc
110/220 Vac
Current Consumption LED
Current Consumption
Xenon
12V - 180mA
IP rating
IP 65
Weight
475g
Packing Dimensions
105x130x130mm
68
24V - 120mA 110/220V - 70mA
BEACONS
the low current sirenco xenon beacons combine excellent efficiency with
high light output. the interchangeable polycabonate lenses are available
in four different colours - red, blue, amber and green.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110/220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
COLOurS
Red, Amber, Blue or Green
LIgHT SOurCE XENON
Xenon tube
FLASH rATE
Xenon - 45 to 60 p/min
CurrENT CONSuMPTION
12V - 115mA
IP rATINg
IP 44
WEIgHT
130g
PACkINg dIMENSIONS
77x90x90mm
24 Vdc
24V - 115mA
110/220 Vac
110/220V - 115mA
69
BEACONS - SIrENCO BEACONS
sIrenCo beACons
Beacons
Sirenco Xenon Beacon with Magnetic Base
beacons - sirenco xenon beacon with magnetic base
Available in a single, double and triple flash version. The unit comes
standard with a twirly cord that fits in the lighter socket of the vehicle
and a magnetic base.
Voltage
Voltage
12-80 Vdc
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 - 80 Vdc
Colour
Red, Amber, Green and Blue
Light source
Xenon tube - 1.5 Joules
flash Rate
Xenon - 45 to 80 flashes p/min (depending on setting)
Current Consumption
0.25A - Single IP rating
IP 66
Weight
850g
Packing Dimensions
130x130x130mm
70
0.5A - Double
0.5A - Triple
BEACONS
sIrenCo rotAtIng beACon wIth mAgnetIC bAse
VOLTAgE
VOLTAgE
12 VdC
24 VdC
BEACONS - SIrENCO rOTATINg BEACON WITH MAgNETIC BASE
the unit comes standard with a twirly cord that fits in the lighter socket
of the vehicle and a magnetic base.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
COLOurS
Red, Amber, Blue or Green
LIgHT SOurCE
Halogen Bulb
FLASH rATE
105 p/min
CurrENT CONSuMPTION
12V - 4A
IP rATINg
IP 66
WEIgHT
980g
PACkINg dIMENSIONS
180x180x180mm
24 Vdc
24V - 3A
71
Emergency Flare
Sirenco Emergency Flare
Emergency Flare - Sirenco Emergency Flare
This 16 LED flare has 9 flash patterns. It is shock resistant, waterproof and
durable. The magnet allows the unit to be attached to metal surfaces.
The emergency flare can be recharged using a 12V car charger or a 220V
wall charger (supplied with unit).
Voltage
Voltage
Rechargeable
battery
12 Vdc / 220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
Lithium Ion 700mAH - 3.7V Battery ±5 Years Battery life
Colours
Red, Amber, Blue, Green, White & Yellow
Light Source
16 High Bright Long Life LED’s
App. Range
800m
Flash Patterns
Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue 14 hrs, Steady on 5
hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs
Charger
Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit).
Unit will be fully charged within 3 hours
IP Rating
IP67, Unit can be submerged down to 2m and can float on water. Durable construction.
Weight
285g
Packing Dimensions
110x110x80mm
72
EMERGENCY FLARE
this 6 pack carry-case configuration allows for 6 emergency flares to be
charged simultaneously. this 16 Led flare has 9 flash patterns. it is shock
resistant,waterproof and durable the magnet allows the flare to be
attached to metal surface. the emergency flare can be recharged using a
12V car charger or a 220V wall charger (supplied with unit).
VOLTAgE
VOLTAgE
rECHArgEABLE
BATTEry
12 VdC / 220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
Lithium Ion 700mAH - 3.7V Battery 5+ Years Battery life
COLOurS
Red, Amber, Blue, Green, White & Yellow
LIgHT SOurCE
16 High Bright Long Life LED’s
APP, rANgE
800m
FLASH PATTErNS
Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue
14 hrs, Steady on 5 hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs
CHArgEr
Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit)
Unit will be fully charged within 3 hours
IP rATINg
IP67, Unit can be submerged down to 2m and can float on water. Durable construction.
WEIgHT
3.1kg (285g each)
PACkINg dIMENSIONS
450x370x75mm
73
EMErgENCy FLArE - SIrENCO EMErgENCy FLArE 6 PACk
sIrenCo emergenCy FLAre 6 PACk
IS Portable Beacon
Sirenco IS Portable Beacon
IS Portable Beacon - Sirenco Emergency Flare
The IS Portable Beacon is used for intrinsically safe applications and is
designed for hazardous environments such as petrol chemical plants and
coal mines. The uniqueness of this unit is its durability and versatility as
it is a rechargeable mobile IS unit. This unit has 16 high bright LED’s with
up to 60 hours of flash time (depending on mode), and has 9 selectable
flash modes. It is shock resistant and waterproof. The magnet allows
the portable beacon to be attached to metal surfaces. The emergency
portable beacon is charged within 8 hours and can be recharged using a
12V car charger or a 220V wall charger (supplied with unit).
Voltage
Voltage
Rechargeable
battery
12 Vdc / 220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Type
Sirenco IS Portable Beacon
Classification
60cm EXi9 l 150˚C Ma
Certification
SAEx M/11-370X, certified for surface and underground application
type
IS II
Ex rating
Exia 1 150˚C Ma
Weight
285g
Packing Dimensions
110x110x80mm
PLEASE NOTE: The charger is not suitable for use in IS locations.
74
OTHER UNITS
sIrenCo bLAster
OTHEr uNITS - SIrENCO BLASTEr
the sirenco blaster is a multi purpose audible signaling device. it
is ideal for personal
protection, sporting activities and as a back up alarm for
industry, shopping centres and public places in the event of an
emergency. the unit can also be placed inside the sirenco wall
box as a complete stand alone emergency device.
replacement canisters are available.
SIzE
SIzE
40ML CANISTEr
100ML CANISTEr
SIzE
SIzE
135ML CANISTEr
300ML CANISTEr
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
POWEr SuPPLy
Gas power air canister
SOuNd OuTPuT
40ml Can: 115dB
100ml Can: 115dB
135ml Can: 127dB
300ml Can: 127dB
BLASTS PEr CANISTEr
40ml Can:
20 short blasts
100ml Can:
50 short blasts
135ml Can:
60 short blasts
300ml Can:
120 short blasts
TrANSPOrT INFOrMATION
COMPRESSED GAS, NON FLAMMABLE, IATA/IMDG CLASS 2.2
WEIgHT
40ml Can: 80g
100ml Can: 160g
135ml Can: 244g
300ml Can: 444g
PACkINg dIMENSIONS
40ml Can:
155x60x60mm
100ml Can:
200x60x60mm
135ml Can:
215x70x70mm
300ml Can:
305x70x70mm
dIrECTIONS
To attach the horn to the canister, place the horn on top of the canister and screw clockwise. Avoid cross
threading. Do not over tighten. The canister must be held in an upright position with forefinger pressed
firmly on the button.
CAuTION
Contents under pressure. Do not tilt or invert canister during use. The safety device creates a loud noise. Do
not emit sound next to ears. Keep out of reach of children. Do not puncture, incinerate or use near open
flame. Contains non flammable Freon gas. Unit must be stored in temperatures not exceeding 49°C.
gAS CErTIFICATE
MSDS Certificate available on request
75
other units
other units - Megaphones
Megaphones
•
•
•
•
•
•
Option 1
option 2
AM-20H Handgrip
AM-21S Shoulder slung
Dry cell & 12V car battery operation
All ABS body, sturdy yet lightweight
Built in siren & microphone
Clear sound, long range and effecient design
Conveniently located volume control & switch
Ideal for crowd control, fire fighting, rescue operations,
construction sites, sport events, electioneering, field
publicity and film shooting.
Specifications
Power Source
14 VdC 8 X UM-2 cells or carPlease
battery visit
Voice Range
400m
Power output
16W rated / 20W rated
Battery Life
8 - 10 hours
Mircrophone
Directional
Weight
2.2kg
Packing Dimensions
Horn dia. 220mm, Length 370mm
our website for all the latest information,
www.kama.co.za.
School and Factory Timer
The school and factory timer
is ideally suited to work in
conjunction with a wide range
of applications e.g. school period
changes or factory tea/lunch
breaks.
This versatile timer can also be
used for general purpose time
switch applications.
All dimensions in mm
Voltage
230 Vac
Please visit our website for all the latest information,
www.kama.co.za.
Specifications
Description
Factory time switch box complete with time switch with 50 programs in an IP 56 housing
Consumption
16 Amp
weight
950g
76
SON F1 RANGE
the e2s range of sounder units have been designed to perform at
maximum capacity for as long as required. the sound output can be
decreased by means of a volume control. standard colour is red, but
these units are also available in grey. increased protection can be
achieved by the use of a wr kit which needs to be ordered with the unit.
VOLTAgE
VOLTAgE
10-30 VdC
24 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
100 dB(A) at 1m
SOuNd FrEquENCy
340 / 2 400Hz (Depends on tone selection)
SOuNd SELECT
10 user selectable tones with a 2 stage alarm option
CurrENT CONSuMPTION*
10-30V - 25mA
IP rATINg
IP 55 - can be increased to IP 56 with WR kit
WEIgHT
260g
PACkINg dIMENSIONS
110x110x65mm
24 Vac
24V - 40mA
77
SON F1 rANgE - E2S SON F1 SOuNdEr
e2s son F1 soUnDer
A range - sounder & combination units
E2S A100 Sounder & AL100 Combo
A range - sounder & combination units - E2s A100 sounder & al100 Combo
The E2S range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. The sound output
can be decreased by means of a volume control. Standard colour is red,
but these units are also available in grey.
Voltage
Voltage
10-30 Vdc
24 Vac
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
10-30 Vdc
Duty Cycle
Continuous
24 Vac
110 Vac
Sound Output
104 dB(A) at 1m
Sound Frequency
340 / 2 400Hz (depends on tone selection)
Sound Select
32 user selectable tones with a 3 stage alarm option
App. Range
300m in still air on an open field
220 Vac
Current Consumption
10-30V - 25mA
24V - 40mA
110V - 13mA 220V - 13mA
Current Cons. (Combo)
12V - 525mA
24ac - 405mA
110V - 120mA 220 V - 65 mA
Lens Colour
Red, Amber, Green or Blue
IP Rating
IP 66 - Sounders IP 56 - Combo
Weight
Sounder - 370g
Combo - 570g
Packing Dimensions
110x110x90mm - Sounder
190x110x190mm - Combo
78
A RANGE - SOUNDER & COMBINATION UNITS
the e2s range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. the sound output
can be decreased by means of a volume control. standard colour is red,
but these units are also available in grey and white.
VOLTAgE
VOLTAgE
10-30 VdC
24 VAC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
112 dB(A) at 1m
SOuNd FrEquENCy
340 / 2 400Hz (depends on tone selection)
SOuNd SELECT
32 user selectable tones with a 3 stage alarm option
APP. rANgE
500m in still air on an open field
24 Vac
110 Vac
220 Vac
CurrENT CONSuMPTION
10-30V - 25mA
24V - 40mA
110V - 20mA
220V - 15mA
CurrENT CONS. (COMBO)
12V - 525mA
24V - 275mA
110V - 120mA
220V - 65mA
LENS COLOur
Red, Amber, Green or Blue
IP rATINg
IP 66 - Sounder
IP 56 - Combo
WEIgHT
1kg - Sounder
1.2kg - Combo
PACkINg dIMENSIONS
150x150x140mm - Sounder
150x220x150mm - Combo
79
A rANgE - SOuNdEr & COMBINATION uNITS - E2S A105 SOuNdEr & AL105 COMBO
e2s A105 soUnDer & AL105 Combo
A range - sounder & combination units
E2S A112 Sounder & AL112 Combo
A range - sounder & combination units - E2S A112 Sounder & AL112 Combo
The E2S range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. The sound output
can be decreased by means of a volume control. Standard colour is red,
but these units are also available in grey and white.
Voltage
Voltage
10-30 Vdc
24 Vac
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
10-30 Vdc
Duty Cycle
Continuous
24 Vac
110 Vac
220 Vac
Sound Output
119 dB(A) at 1m
Sound Frequency
340 / 2400Hz (Depends on tone selection)
Sound Select
45 user selectable tones with a 3 stage alarm option
App. Range
800m in still air on an open field
Current Consumption
10-30V - 200mA
24V - 500mA
110V - 100mA
220V - 60mA
Current Cons. (Combo)
12V - 700mA
24V - 450mA
110V - 170mA
220V - 95mA
Lens Colour
Red, Amber, Green or Blue
IP Rating
IP 66 - Sounder IP 56 - Combo
Weight
2.1kg - Sounder
2.3kg - Combo
Packing Dimensions
200x200x160mm - Sounder 200x160x260mm - Combo
80
A RANGE - SOUNDER & COMBINATION UNITS
the e2s range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. the sound output
can be decreased by means of a volume control. standard colour is red,
but these units are also available in grey.
VOLTAgE
VOLTAgE
10-30 VdC
24 VAC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
126 dB(A) at 1m
SOuNd FrEquENCy
340 / 2400Hz (Depends on tone selection)
SOuNd SELECT
45 user selectable tones with a 3 stage alarm option
APP. rANgE
1 000m in still air on an open field
CurrENT CONSuMPTION
10-30V - 950mA
24V - 1 000mA
110V - 240mA
220V - 120mA
CurrENT CONS. (COMBO)
10-30V - 1 450mA
24V - 1 200mA
110V - 310mA
220V - 155mA
LENS COLOur
Red, Amber, Green or Blue
24 Vac
110 Vac
220 Vac
IP rATINg
IP 66 - Sounder
IP 56 - Combo
WEIgHT
2.7kg - Sounder
2.9kg - Combo
PACkINg dIMENSIONS
220x200x220mm - Sounder
220x280x200mm - Combo
81
A rANgE - SOuNdEr & COMBINATION uNITS - E2S A121 SOuNdEr & AL121 COMBO
e2s A121 soUnDer & AL121 Combo
A RANGE - SOUNDER & COMBINATION UNITS
e2s A141 soUnDer
A rANgE - SOuNdEr & COMBINATION uNITS - E2S A141 SOuNdEr
the e2s a141 is an unique very powerful disaster warning sounder.
the tsunami is a compact, high powered unit with a nominal output of
141db(a) at 1 metre. ideally suited for battery backup applications where
disaster situations could arise.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
141 dB(A) at 1m
SOuNd FrEquENCy
340 / 2 900Hz (depends on tone selection)
SOuNd SELECT
45 user selectable tones with a 3 stage alarm option
APP. rANgE
3 000m in still air
CurrENT CONSuMPTION
24V - 13.2A
IP rATINg
IP 65
WEIgHT
14kg
82
110 Vac
110V - 4.2A
220 Vac
220V - 1.95A
EXPLOSION PROOF DEVICE
e2s eX 05 beACon
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
EXPLOSION PrOOF dEVICE - E2S EX 05 BEACON
the e2s range of ex beacons are best suited for hazardous robust
applications. suitable for zone 1, 2, 21 & 22 and gas groups iic. six lens
colours available: red, Yellow, amber, blue, clear and green. automatic
synchronisation on multibeacon systems. the units are chromated
and powder coated with good resistance to humidity and salt spray
environments. this is a flame proof unit and should be installed by
suitably qualified persons.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous Rated
COLOurS
Amber, Red, Yellow, Clear, Blue or Green
LIgHT SOurCE
Xenon Tube
LIgHT OuTPuT
5 Joule @ 1Hz
CLASSIFICATION
Exd IIA, IIB & IIC T5
CErTIFICATION
ATEX / CENELEC / FTZU / IECEx / GOST R
gAS grOuPS
IIC
IgNITION grOuP
T4 - 135°C
IP rATINg
IP 67
WEIgHT
2.75kg
PACkINg dIMENSIONS
280x200x200mm
24 Vdc
110 Vac
220 Vac
83
Explosion Proof Device
E2S EX 10 Beacon
Explosion Proof Device - E2S EX 10 Beacon
The E2S range of Ex beacons are best suited for hazardous robust
applications. Suitable for zone 1, 2, 21 & 22 and Gas Groups IIC. Six lens
colours available: Red, Yellow, Amber, Blue, Clear and Green. Automatic
synchronisation on multibeacon systems. The units are chromated
and powder coated with good resistance to humidity and salt spray
environments. This is a flame proof unit and should be installed by
suitably qualified persons.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
Continuous Rated
24 Vdc
110 Vac
220 Vac
24V - 660mA
110V - 250mA
220V - 110mA
Current Consumption
12V - 1 450mA
Colours
Amber, Red, Yellow, Clear, Blue or Green
Light Source
Xenon Tube
Light Output
10 Joule @ 1Hz
Classification
Exd IIA, IIB & IIC T4
certification
ATEX / CENELEC / FTZU / IECEx / GOST R
Gas Groups
IIC
Ignition Group
T4 - 135°C
IP Rating
IP 67
Weight
2.75kg
Packing Dimensions
280x200x200mm
84
EXPLOSION PROOF DEVICE
e2s eX 15 beACon
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
EXPLOSION PrOOF dEVICE - - E2S EX 15 BEACON
the e2s range of ex beacons are best suited for hazardous robust
applications. suitable for zone 1, 2, 21 & 22 and gas groups iic. six lens
colours available: red, Yellow, amber, blue, clear and green. automatic
synchronisation on multibeacon systems. the units are chromated
and powder coated with good resistance to humidity and salt spray
environments. this is a flame proof unit and should be installed by
suitably qualified persons.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous Rated
CurrENT CONSuMPTION
12V - 1 450mA
COLOurS
Amber, Red, Yellow, Clear, Blue or Green
LIgHT SOurCE
Xenon Tube
LIgHT OuTPuT
10 Joule @ 1Hz
CLASSIFICATION
Exd IIA, IIB & IIC T4
CErTIFICATION
ATEX / CENELEC / FTZU / IECEx / GOST R
gAS grOuPS
IIC
IgNITION grOuP
T4 - 135°C
IP rATINg
IP 67
WEIgHT
2.75kg
PACkINg dIMENSIONS
280x200x200mm
24 Vdc
110 Vac
220 Vac
24V - 660mA
110V - 250mA
220V - 110mA
85
Explosion Proof Device
E2S EX 1105 Combo
Explosion Proof Device - E2S EX 1105 Combo
The E2S range of Ex combos are best suited for hazardous robust
applications. Suitable for zone 1, 2, 21 & 22 and Gas Group IIB. Six
lens colours available: Red, Yellow, Amber, Blue, Clear and Green.
Automatic synchronisation on multi beacon systems. The units are
chromated and powder coated with good resistance to humidity
and salt spray environments. This is a flame proof unit and should be
installed by suitably qualified persons.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
86
Voltage
12 Vdc
Duty Cycle
Continuous Rated
Current Consumption
12V - 945mA
24 Vdc
110 Vac
220 Vac
24V - 520mA
110V - 280mA
220V - 111mA
Sound Output
117 dB(A) at 1m
Sound Frequency
420 / 2 900Hz (Depends on tone selection)
Sound Select
32 user selectable tones
colours
Amber, Red, Yellow, Clear, Blue or Green
Light Source
Xenon Tube
Light Output
5 Joule @ 1Hz
Classification
Exd IIA, IIB & IIC T4
Certification
ATEX / CENELEC / FTZU / IECEx / GOST R
Gas Group
IIB
Ignition Group
T4 - 135°C
IP rating
IP 67
Weight
2.75kg
Packing Dimensions
400x200x200mm
EXPLOSION PROOF DEVICE
the e2s ex sounders can be used at petro chemical plants, fiery mines
and where ex is required. the unit is chromated and powder coated with
excellent resistance to humidity and salt spray environments. this is a
flame proof unit and should be installed by suitably qualified person.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous Rated
CurrENT CONSuMPTION
12V - 195mA
SOuNd OuTPuT
117 dB(A) at 1m
SOuNd FrEquENCy
420 / 2 900Hz (depends on tone sellection)
SOuNd SELECT
32 users selectable tones with a 3 stage option
APP. rANgE
800m
CLASSIFICATION
Exd IIA, IIB & IIC T4
CErTIFICATION
ATEX / CENELEC / FTZ4 / IECEX / G0ST R
gAS grOuPS
IIC
IgNITION grOuP
T4 - 135°C
IP rATINg
IP 67
WEIgHT
3.4kg
PACkINg dIMENSIONS
320x230x230mm
24 Vdc
110 Vac
220 Vac
24V - 250mA
110V - 110mA
220V - 56mA
87
EXPLOSION PrOOF dEVICE - E2S EX 11 SOuNdEr
e2s eX 11 soUnDer
Explosion Proof Device
E2S EX 12 Sounder
Explosion Proof Device - E2S EX 12 Sounder
The E2S Ex Sounders can be used at petro chemical plants, fiery mines
and where Ex is required. The unit is chromated and powder coated with
excellent resistance to humidity and salt spray environments. This is a
flame proof unit and should be installed by suitably qualified person.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12Vdc
Duty Cycle
Continuous Rated
24 Vdc
110 Vac
220 Vac
24V - 800mA
110V - 180mA
220V - 90mA
Current Consumption
12V - 850mA
Sound Output
123 dB(A) at 1m
Sound Frequency
420 / 2 900Hz (Depends on tone selection)
Sound Select
32 user selectable tones with a 3 stage alarm option
App. Range
1 000m
ip Rating
IP 67
Classification
Exd IIA, IIB & IIC T4
Certification
ATEX / CENELEC / FTZ4 / IECEX / G0ST R
Gas Group
IIA, IIB & IIC
Ignition Group
T4 - 135°C
Weight
3.4kg
Packing Dimensions
400x200x200mm
88
EXPLOSION PROOF DEVICE
e2s eX breAk gLAss CALL PoInt
EXPLOSION PrOOF dEVICE - E2S EX BrEAk gLASS CALL POINT
the e2s ex break glass manual call points are approved for zones: 1, 2,
21 & 22. For the control of hazardous areas, fire and gas alarm systems.
available with and without monitoring & resistors. all versions are
certified to atex standards.
VOLTAgE
24 VdC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 VDC
duTy CyCLE
Continuous
HOuSINg MATErIAL
Marine grade copper free LM6 Aluminium
COLOur
Red
CLASSIFICATION
II 2G Ex e d mb IIC T4 Gb
CErTIFICATION
Atex: Sira 09ATEX3286X
gAS grOuPS
Zones: 1, 2, 21, 22
IgNITION grOuP
T4-135°C
IP rATINg
IP 66
WEIgHT
800g
PACkINg dIMENSIONS
112x76x100mm
89
Explosion Proof Device
E2S EX PUSH BUTTON CALL POINT
Explosion Proof Device - E2s ex PUSH BUTTON CALL POINT
The E2S EX Push Button manual call points are approved for zones: 1, 2,
21 & 22. For the control of hazardous areas, fire and gas alarm systems.
Available with and without monitoring & resistors. All versions are
certified to ATEX standards.
Voltage
24 VDC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
All dimensions in mm
Specifications
Voltage
24 VDC
Duty Cycle
Continuous
HOUSING MATERIAL
Marine grade copper free LM6 Aluminium
Colour
Red
Classification
II 2G Ex e d mb IIC T4 Gb
certification
Atex: Sira 09ATEX3286X
Gas Groups
Zones: 1, 2, 21, 22
Ignition Group
T4-135°C
IP Rating
IP 66
Weight
800g
Packing Dimensions
112x76x100mm
90
EXPLOSION PROOF DEVICE
e2s eX tooL reset CALL PoInt
EXPLOSION PrOOF dEVICE - E2S EX TOOL rESET CALL POINT
the e2s ex tool reset manual call points are approved for zones: 1, 2,
21 & 22. For the control of hazardous areas, fire and gas alarm systems.
available with and without monitoring & resistors. all versions are
certified to atex standards.
VOLTAgE
24 VdC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 VDC
duTy CyCLE
Continuous
HOuSINg MATErIAL
Marine grade copper free LM6 Aluminium
COLOur
Red
CLASSIFICATION
II 2G Ex e d mb IIC T4 Gb
CErTIFICATION
Atex: Sira 09ATEX3286X
gAS grOuPS
Zones: 1, 2, 21, 22
IgNITION grOuP
T4-135°C
IP rATINg
IP 66
WEIgHT
800g
PACkINg dIMENSIONS
112x76x100mm
91
IS Range
E2S IS Minialarm Sounder
IS Range - E2S IS Minialarm Sounder
The E2S IS Sounder is a specialised intrinsically safe
product and installation must be completed by a certified person.
Voltage
Voltage
16 - 28 Vdc
via Zener barrier
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
16-28 Vdc (via Zener barrier)
Duty Cycle
Continuous Rated
Current Consumption
25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier
Sound Output
100 dB(A) at 1m
Sound Frequency
340 / 2900Hz (Depends on tone selection)
Sound Select
49 user selectable tones with a 3 stage alarm
App. Range
300m
Classification
Ex II 1G EEx ia IIC T4
certification
05 ATEX 2084X
Gas Groups
Zone 0, 1 & 2, Gas Group IIC
Ignition Group
T4 - 135°C
IP Rating
IP 65
Weight
453g
Packing Dimensions
100x100x100mm
92
IS RANGE
e2s Is mInIALert Combo
VOLTAgE
VOLTAgE
16 - 28 VdC
VIA zENEr BArrIEr
IS rANgE - E2S IS MINIALErT COMBO
the e2s is range is used only for intrinsically safe applications. this is
combination unit is ideal for areas where an audible and visual alarm is
required. installation must be completed by a certified person.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
16-28 Vdc (via Zener barrier)
duTy CyCLE
Continuous Rated
CurrENT CONSuMPTION
48mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
LIgHT SOurCES
6 high intensity LEDs
LENS COLOur
Red, Amber, Green, Blue and Clear
SOuNd OuTPuT
100 dB(A) at 1m
SOuNd FrEquENCy
340 / 2 900Hz (Depends on tone selection)
SOuNd SELECT
49 user selectable tones with a 3 stage alarm
APP. rANgE
300m
CLASSIFICATION
Ex II 1G EEx ia IIC T4
CErTIFICATION
05 ATEX 2084X
gAS grOuPS
Zone 0, 1 & 2, Gas Group IIC
IgNITION grOuP
T4 - 135°C
IP rATINg
IP 65
WEIgHT
750g
PACkINg dIMENSIONS
120x100x100mm
93
IS Range
E2S IS Minialite Beacon
IS Range - E2S IS Minialite Beacon
The E2S Intrinsically Safe beacon has an array of 6 high intensity LEDs.
Prismatic lens optimises LED effectiveness. Two flash modes (2Hz and
1Hz) are featured with very low current consumption.
Voltage
Voltage
16 - 28 Vdc
via Zener barrier
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
16-28 Vdc (via Zener barrier)
Duty Cycle
Continuous rated
Current Consumption
25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
Colour
Red, Amber, Blue & Green
Light Source
6 High Intensity LEDs
Classification
Ex II 1G EEx ia IIC T4
certification
05 ATEX 2084X
Gas Groups
Zone 0, 1 & 2, Gas Group IIC
Ignition Group
T4 - 135°C
IP Rating
IP 65
Weight
T4 - 135°C
Packing Dimensions
100x100x100mm
94
IS RANGE
e2s Is A105 soUnDer
VOLTAgE
VOLTAgE
16 - 28 VdC
VIA zENEr BArrIEr
IS rANgE - E2S IS A105 SOuNdEr
the e2s is sounder range is used only for intrinsically safe applications.
all the features of the a105 sounder but the added advantages of is.
an is combination unit is also available and is ideal for areas where an
audible/visual alarm is required.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
16-28 Vdc (via Zener barrier)
duTy CyCLE
Continuous rated
CurrENT CONSuMPTION
25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
SOuNd OuTPuT
105 dB(A) at 1m
SOuNd FrEquENCy
340 / 2 900Hz (Depends on tone selection)
SOuNd SELECT
49 user selectable tones with a 3 stage alarm option
APP. rANgE
500m
CLASSIFICATION
Ex II 1G EEx ia IIC T4
CErTIFICATION
05 ATEX 2084X
gAS grOuPS
Zone 0, 1 & 2, Gas Group IIC
IgNITION grOuP
T4 - 135°C
IP rATINg
IP 66
WEIgHT
750g - Sounder
PACkINg dIMENSIONS
150x150x150mm
1.2kg - Combo
95
IS Range
E2S IS L101 Beacon
IS Range - E2S IS L101 Beacon
The E2S Intrinsically Safe beacon has an array of 6 high intensity LEDs.
Prismatic lens optimises LED effectiveness. Two flash modes (2Hz and
1Hz) are featured with very low current consumption.
Voltage
Voltage
16 - 28 Vdc
via Zener barrier
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
16-28 Vdc (via Zener barrier)
Duty Cycle
Continuous rated
Current Consumption
25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
Colour
Red, Amber, Blue & Green
Light Source
6 LEDs
Classification
Ex II 1G EEx ia IIC T4
certification
SIRA 04 ATEX 2302X / IECEx SIR 04.0039X
Gas Groups
Zone 0, 1 & 2, Gas Group IIC
Ignition Group
T4 - 135°C
IP Rating
IP 66
Weight
645g
Packing Dimensions
110x110x100mm
96
IS RANGE
the e2s is break glass manual call points are approved for zones: 0, 1, 2,
21 & 22 requiring intrinsically sale equipment for the control of fire and
gas alarm systems. available with and without monitoring & resistors. all
versions are certified to atex standards.
VOLTAgE
24 VdC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 VDC
duTy CyCLE
Continuous
HOuSINg MATErIAL
Marine grade copper free LM6 Aluminium
COLOur
Red
CLASSIFICATION
II 1G Ex ia IIC T4 Ga
CErTIFICATION
Atex: Sira 09ATEX2287X
gAS grOuPS
Zones: 0, 1, 2, 21, 22
IgNITION grOuP
T4-135°C
IP rATINg
IP 66
WEIgHT
800g
PACkINg dIMENSIONS
112x76x100mm
97
IS rANgE - E2S IS BrEAk gLASS CALL POINT
e2s Is breAk gLAss CALL PoInt
IS Range
E2S IS PUSH BUTTON CALL POINT
IS RANGE - E2s IS PUSH BUTTON CALL POINT
The E2s IS Push Button manual call points are approved for zones: 0, 1, 2,
21 & 22 requiring intrinsically sale equipment for the control of fire and
gas alarm systems. Available with and without monitoring & resistors. All
versions are certified to ATEX standards.
Voltage
24 VDC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 VDC
Duty Cycle
Continuous
HOUSING MATERIAL
Marine grade copper free LM6 Aluminium
Colour
Red
Classification
II 1G Ex ia IIC T4 Ga
certification
Atex: Sira 09ATEX2287X
Gas Groups
Zones: 0, 1, 2, 21, 22
Ignition Group
T4-135°C
IP Rating
IP 66
Weight
800g
Packing Dimensions
112x76x100mm
98
IS RANGE
the e2s is tool reset manual call points are approved for zones: 0, 1, 2,
21 & 22 requiring intrinsically sale equipment for the control of fire and
gas alarm systems. available with and without monitoring & resistors. all
versions are certified to atex standards.
VOLTAgE
24 VdC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 VDC
duTy CyCLE
Continuous
HOuSINg MATErIAL
Marine grade copper free LM6 Aluminium
COLOur
Red
CLASSIFICATION
II 1G Ex ia IIC T4 Ga
CErTIFICATION
Atex: Sira 09ATEX2287X
gAS grOuPS
Zones: 0, 1, 2, 21, 22
IgNITION grOuP
T4-135°C
IP rATINg
IP 66
WEIgHT
800g
PACkINg dIMENSIONS
112x76x100mm
99
IS rANgE - E2S IS TOOL rESET CALL POINT
e2s Is tooL reset CALL PoInt
Beacons 2
E2S LED Beacons
Beacons 2 - E2S LED Beacons
The E2S LED Beacon can be used for any application where a visual
warning indicator is required. Eight high intensity LEDs with six lens
colours are available.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
All dimensions in mm
Specifications
Voltage
12 Vdc
Colour LED
Red, Amber, Yellow, Clear, Blue & Green
24 Vdc
Duty Cycle
Continuous rated
Light source
8 Hi-bright LED array @ 2Hz
Current Consumption
12V -150mA
IP Rating
IP 66
Weight
200g
Packing Dimensions
100x100x100mm
100
24V - 100mA
110 Vac
220 Vac
110V - 54mA
220V - 27mA
BEACONS 2
e2s Xenon beACons
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
BEACONS 2 - E2S XENON BEACONS
the e2s xenon beacon can be used for any application where a visual
warning indicator is required. seven lens colours are available.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
COLOur LEd
Red, Amber, Yellow, Clear, Opal, Blue & Green
duTy CyCLE
Continuous Rated
LIgHT SOurCE
5 Joule Xenon @ 1Hz
CurrENT CONSuMPTION
12V - 500mA
IP rATINg
IP 66
WEIgHT
200g
PACkINg dIMENSIONS
100x100x100mm
24 Vac
24V - 300mA
110Vac
220 Vac
110V - 70mA
220V - 35mA
101
Marine Range
E2S MA112 Marine Sounder
Marine Range - E2S MA112 Marine Sounder
The E2S Marine range is best suited for all marine and salt spray
conditions. These high output sounders offer IP 67 protection. Ideal for
harsh environments with high ambient noise levels.
Voltage
Voltage
10-30 Vdc
24 Vac
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
181
273
All dimensions in mm
Specifications
Voltage
10-30 Vdc
Duty Cycle
Continuous
24 Vac
110 Vac
220 Vac
24V - 500mA
110V - 100mA
220V - 60mA
Current Consumption
10-30V - 200mA
Sound Output
119 dB(A) at 1m
Sound Frequency
300 / 2 400Hz (Depends on tone selection)
Sound Select
45 user selectable tones with a 3 stage alarm option
App. Range
800m in still air on open field
IP Rating
IP 67
Weight
3kg
Packing Dimensions
300x200x200mm
102
MARINE RANGE
the e2s marine range is best suited for all marine and salt spray
conditions. these high output sounders offer iP 67 protection. ideal for
harsh environments with high ambient noise levels.
VOLTAgE
VOLTAgE
10-30 VdC
24 VAC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
duTy CyCLE
Continuous
CurrENT CONSuMPTION
10-30V - 950mA
SOuNd OuTPuT
126 dB(A) at 1m
SOuNd FrEquENCy
300 / 2 900Hz (Depends on tone selection)
SOuNd SELECT
45 user selectable tones with a 3 stage alarm option
APP. rANgE
1 000m in still air on open field
IP rATINg
IP 67
WEIgHT
3kg
PACkINg dIMENSIONS
340x220x220mm
24 Vac
110 Vac
220 Vac
24V - 1 000mA
110V - 240mA
220V - 120mA
103
MArINE rANgE - E2S MA121 MArINE SOuNdEr
e2s mA121 mArIne soUnDer
Marine Range
E2S Marine 5 Beacon
Marine Range - E2S Marine 5 Beacon
The E2S Marine range is best suited for all marine and salt spray
conditions. These high visibility beacons offer IP 67 protection. Ideal for
harsh environments.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vdc
Duty Cycle
Continuous
colour
Red, Amber, Blue & Green
Light source
Xenon Tube - 5 Joule @ 1Hz
Current Consumption
12V - 550mA
IP Rating
IP 67
Weight
1.48kg
Packing Dimensions
250x200x200mm
104
24 Vdc
24V - 300mA
110 Vac
220 Vac
110V - 140mA
220V - 55mA
MARINE RANGE
the e2s marine range is best suited for all marine and salt spray
conditions. these high visibility beacons offer iP 67 protection. ideal for
harsh environments.
VOLTAgE
VOLTAgE
10-30 VdC
24 VAC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous
LENS COLOur
Red, Amber, Blue & Green
LIgTH SOurCE
Xenon Tube - 10 Joule @ 1Hz
CurrENT CONSuMPTION
12V - 1 145mA
IP rATINg
IP 67
WEIgHT
1.48kg
PACkINg dIMENSIONS
250x200x200mm
24 Vdc
24V - 660mA
110 Vac
220 Vac
110V - 250mA
220V - 125mA
105
MArINE rANgE - E2S MArINE 10 BEACON
e2s mArIne 10 beACon
Marine Range
E2S MCA112-05 Marine Combo
Marine Range - E2S MCA112-05 Marine Combo
The E2S Marine range is best suited for all marine and salt spray
conditions. This high output sounder and beacon combination unit offers
IP67 protection. Ideal for harsh environments with high ambient noise
levels.
Voltage
Voltage
24 Vdc
-
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 Vdc
Duty Cycle
Continuous
110 Vac
220 Vac
110V - 250mA
220V - 115mA
Current Consumption
24V - 150mA
Colour
Red, Blue, Green & Amber
Sound Output
119 dB(A) at 1m
Sound Frequency
340 / 2 900Hz (depends on tone selection)
Sound Select
45 user selectable tones with a 3 stage alarm option
App. Range
800m in still air on open field
Light Source
Xenon Tube - 5 Joule @ 1Hz
IP Rating
IP 67
Weight
3.5kg
Packing Dimensions
400x200x200mm
106
SON 4
the e2s son 4 and Led combos are continuously rated compact
combination sounder and beacon units for fire and security applications
where an audible and visual effect is required.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous
CurrENT CONSuMPTION
12V - 50mA
20mA
SOuNd OuTPuT
100 dB(A) at 1m
SOuNd FrEquENCy
340 / 2 900Hz (Depends on tone selection)
SOuNd SELECT
10 user selectable tones with a 3 stage alarm option
APP. rANgE
100m in still air on open field
LIgHT SOurCE
5 High Intensity LEDs @ 2Hz
LENS COLOurS
Red, Blue, Green & Amber
IP rATINg
IP 66
WEIgHT
400g
PACkINg dIMENSIONS
110x100x100mm
24 Vdc
24Vdc - 50mA
48V - 40mA
24 Vac
110 Vac
220 Vac
24Vac - 60mA
110V - 25mA
220V -
107
SON 4 - E2S SON 4 LEd COMBO
e2s son 4 LeD Combo
Son 4
E2S Son 4 Xenon
son 4 - E2S Son 4 XEnon
The E2S Son 4 and Xenon combos are continuously rated compact
combination sounder and beacons units for fire and security applications
where an audible and visual effct is required.
Voltage
Voltage
24 Vdc
24 Vac
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 Vdc
Duty Cycle
Continuous
Current Consumption
24V - 34-80mA
Sound Output
104 dB(A) at 1m
24 Vac
110 Vac
220 Vac
24V - 40-90mA
110V - 35mA
220V - 20mA
Sound Frequency
340 / 2900Hz (depends on tone selection)
Sound Select
32 user selectable tones with a 3 stage alarm option
App. Range
100m in still air on open field
Light Source
Xenon Tube - 5 Joule @ 1Hz
Lens Colours
Red, Amber, Blue & Green
IP Rating
IP 66
Weight
400g
Packing Dimensions
110x100x100mm
108
APPELLO
e2s A105 & AL105 APPeLLo sPeeCh & tone
VOLTAgE
VOLTAgE
9-15 VdC
18-30 VdC
110 VAC
220 VAC
APPELLO - E2S A105 & AL105 APPELLO SPEECH & TONE
the appello range of voice annunciation sounders utilise analogue
storage direct to silicon to offer up to 16 seconds or 2x8 seconds of
user recordable speech. For applications requiring multiple sounders a
synchronised voice annunciation sounder is also available.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
9-15 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
105 dB(A) at 1m
SOuNd FrEquENCy
420 / 1 200Hz (Depends on tone selection)
SOuNd SELECT
10 user selectable tones
APP. rANgE
500m in still air on open field
CurrENT CONSuMPTION
9-15V - 150mA
CurrENT CONS (COMBO)
12V - 250mA
18-30 Vdc
110 Vac
220 Vac
18-30V - 180mA
110V - 40mA
220V - 20mA
24V - 200mA
110V - 80mA
220V - 40mA
IP rATINg
IP 66 - Sounder
IP 56 - Combo
WEIgHT
1kg - Sounder
1.4kg - Combo
PACkINg dIMENSIONS
150x150x150mm - Sounder
150x150x240mm - Combo
109
appello
E2S A112 & AL112 Appello Speech & Tone
Appello - E2S A112 & AL112 Appello Speech & Tone
The Appello range of voice annunciation sounders
utilise analogue storage direct to silicon to offer up to 16 seconds or 2x8
seconds of user recordable speech. For applications requiring multiple
sounders a synchronised voice annunciation sounder is also available.
Voltage
Voltage
9-15 Vdc
18-30 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
9-15 Vdc
Duty Cycle
Continuous
18-30 Vdc
110 Vac
Sound Output
112 dB(A) at 1m
Sound Frequency
420 / 1 200Hz (Depends on tone selection)
Sound Select
10 user selectable tones with a 2 stage alarm option
App. Range
800m in still air on open field
220 Vac
Current Consumption
9-15V - 150mA 18-30V - 180mA 110V - 40mA 220V - 20mA
Current Cons (Combo)
12V - 250mA 24V - 200mA 110V - 80mA 220V - 40mA
IP Rating
IP 66 - Sounder IP 56 - Combo
Weight
1.2kg - Sounder 2.5kg - Combo
Packing Dimensions
200x200x200mm - Sounder
250x200x200mm - Combo
110
GPH HORNS
the e2s gPH Horn range is best suited for all applications where a low
frequency sound is required or a sound distinctly different from a siren or
electronic sounder.
VOLTAgE
VOLTAgE
10-30 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
105 dB(A) at 1m
SOuNd FrEquENCy
60Hz (depends on tone selection)
SOuNd SELECT
3 user selectable tones including a “Buzzer” tone
APP. rANgE
500m in still air on open field
CurrENT CONSuMPTION
24V - 62mA
IP rATINg
IP 66
WEIgHT
350g
PACkINg dIMENSIONS
120x120x80mm
110 Vac
110V - 40mA
220 Vac
220V - 50mA
111
gPH HOrNS - E2S gPH 1 SurFACE MOuNT ALArM HOrN
e2s gPh 1 sUrFACe moUnt ALArm horn
GPH Horns
E2S GPH 2 Flush Mount Alarm Horn
GPH horns - E2S GPH 2 Flush Mount Alarm Horn
The E2S GPH Horn range is best suited for all applications where a low
frequency sound is required or a sound distinctly different from a siren or
electronic sounder.
Voltage
Voltage
10-30 Vdc
110 Vac
220 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
10-30 Vdc
Duty Cycle
Continuous
110 Vac
Sound Output
105 dB(A) at 1m
Sound Frequency
60Hz (depends on tone selection)
Sound Select
3 user selectable tones including “Buzzer” tone
App. Range
500m in still air on open field
Current Consumption
10-30V - 62mA IP Rating
IP 54
Weight
350g
Packing Dimensions
160x160x50mm
112
110V - 40mA
220 Vac
220V - 50mA
HOOTRONIC RANGE
the e2s Hootronic series of products reproduce the sounds made by
traditional electromechanical signalling devices but in a modern, reliable
and cost effective way. the range is continuously rated, and requires zero
maintenance and signal quality and performance will not degrade with
age. this unit produces the sounds of a siren, bell, hooter and church
bell.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
121 dB(A) at 1m
SOuNd FrEquENCy
50 / 60Hz (Depends on tone selection)
SOuNd SELECT
5 traditional sounds and 3 stages
APP. rANgE
1 000m in still air on open field
CurrENT CONSuMPTION
24V - 375mA
IP rATINg
IP 66
WEIgHT
3kg
PACkINg dIMENSIONS
350x250x250mm
110 Vac
110V - 160mA
220 Vac
220V - 75mA
113
HOOTrONIC rANgE - E2S HMA121 HOOTrONIC SOuNdEr
e2s hmA121 hootronIC soUnDer
Hootronic range
E2S HMCA112 Hootronic Sounder & Beacon Combo
hootronic range - E2S HMCA112 Hootronic Sounder and Beacon Combo
The E2S Hootronic series of products reproduce the
sounds made by traditional electromechanical signalling devices but in a
modern, reliable and cost effective
way. the range is continuously rated, requires zero maintenance and
signal quality and performance will not degrade with age. This unit
produces the sounds of a siren, bell, hooter and church bell.
Voltage
Voltage
24 Vdc
110 Vac
220 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 Vdc
Duty Cycle
Continuous
110 Vac
Sound Output
112 dB(A) at 1m
Sound Frequency
50 / 60Hz (Depends on tone selection)
Sound Select
5 traditional sounds and 3 stages
App. Range
800m in still air on open field
Light Source
5 Joule @ 1Hz
Lens colours
Red, Amber, Yellow, Green, Clear & Blue
Current Consumption
24V - 645mA
IP Rating
IP 66
Weight
3.5kg
Packing Dimensions
400x250x250mm
114
110V - 270mA
220 Vac
220V - 130mA
HOOTRONIC RANGE
the e2s Hootronic series of products reproduce the sounds made by
traditional electromechanical signalling devices but in a modern, reliable
and cost effective way. the range is continuously rated, requires zero
maintenance and signal quality and performance will not degrade with
age. this unit produces the sounds of a siren, bell, hooter and church
bell.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
121 dB(A) at 1m
SOuNd FrEquENCy
50 / 60Hz (Depends on tone selection)
SOuNd SELECT
5 traditional sounds and 3 stages
APP. rANgE
1 000m in still air on open field
CurrENT CONSuMPTION
24V - 375mA
IP rATINg
IP 66
WEIgHT
2.7kg
PACkINg dIMENSIONS
220x200x200mm
110Vac
110V - 160mA
220 Vac
220V - 75mA
115
HOOTrONIC rANgE - E2S HA121 HOOTrONIC SOuNdEr
e2s hA121 hootronIC soUnDer
Hootronic range
E2S HAL121 Hootronic Sounder and Beacon Combo
hootronic range - E2S HAL121 Hootronic Sounder and Beacon Combo
The E2S Hootronic series of products reproduce the sounds made by
traditional electromechanical signalling devices but in a modern, reliable
and cost effective way. the range is continuously rated, requires zero
maintenance and signal quality and performance will not degrade with
age. This unit produces the sounds of a siren, bell, hooter
and church bell.
Voltage
Voltage
24 Vdc
110 Vac
220 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 Vdc
Duty Cycle
Continuous
110 Vac
Sound Output
121 dB(A) at 1m
Sound Frequency
50 / 60Hz (depends on tone selection)
Sound Select
5 traditional sounds and 3 stages
App. Range
1 000m in still air on open field
Light Source
5 Joule @ 1Hz
Lens colours
Red, Amber, Yellow, Opal, Green, Clear & Blue
Current Consumption
24V - 645mA
IP Rating
IP 56
Weight
2.9kg
Packing Dimensions
285x230x230mm
116
110V - 270mA
220 Vac
220V - 130mA
SPECTRA BEACONS
the b100 series comprises a xenon strobe beacon, permanent flament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
Pluggable terminals ensure quick installation.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp BA 9 (Permanent status beacon)
LIgHT OuTPuT
5W
CurrENT CONSuMPTION
12V - 417mA
IP rATINg
IP 65
WEIgHT
90g
PACkINg dIMENSIONS
110x100x100 mm
24 Vdc
24V - 208mA
48 Vac
48V - 104mA
110 Vac
220 Vac
110V - 43mA
220V - 22mA
117
SPECTrA BEACONS - SPECTrA B100SLF STATuS FILAMENT BEACON
sPeCtrA b100sLF stAtUs FILAment beACon
SPECTRA BEACONS
sPeCtrA b100FLF FLAshIng FILAment beACon
SPECTrA BEACONS - SPECTrA B100FLF FLASHINg FILAMENT BEACON
the b100 series comprises a xenon strobe beacon, permanent flament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
Pluggable terminals ensure quick installation.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp BA 9 (Flashing Lamp beacon)
LIgHT OuTPuT
5W @ 1Hz
CurrENT CONSuMPTION
12V - 500mA
IP rATINg
IP 65
WEIgHT
93g
PACkINg dIMENSIONS
110x100x100mm
118
24 Vdc
24V - 250mA
48 Vac
110 Vac
220 Vac
48V - 120mA
110V - 35m
A220V - 25mA
SPECTRA BEACONS
the b100 series comprises a xenon strobe beacon, permanent flament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
Pluggable terminals ensure quick installation.
VOLTAgE
VOLTAgE
10 - 30 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Xenon Strobe (Flashing beacon)
LIgHT OuTPuT
1 Joule @ 0.75Hz
CurrENT CONSuMPTION
10-30V - 135mA
IP rATINg
IP 65
WEIgHT
105g
PACkINg dIMENSIONS
110x100x100mm
110 Vac
110V - 30mA
220 Vac
220V - 20mA
119
SPECTrA BEACONS - SPECTrA B100STr XENON BEACON
sPeCtrA b100str Xenon beACon
SPECTRA BEACONS
sPeCtrA b100LDA LeD beACon
SPECTrA BEACONS - SPECTrA B100LdA LEd BEACON
the b100 series comprises a xenon strobe beacon, permanent flament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
Pluggable terminals ensure quick installation.
VOLTAgE
VOLTAgE
10-30 VdC
90-230 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
LENS COLOur
Red, Yellow, Amber, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
LED (Permanent status beacon)
LIgHT OuTPuT
9 High power LED’s
CurrENT CONSuMPTION
10-30V - 80mA
IP rATINg
IP 65
WEIgHT
93g
PACkINg dIMENSIONS
110x100x100mm
120
90-230 Vac
90-230V - 32mA
SPECTRA BEACONS
the b200 series comprises a xenon strobe beacon, permanent filament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
the surface mount base is supplied with a neoprene mounting gasket
and can also be supplied with a right angle bracket or with a
tube mounting assembly.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp BA 9 (Permanent Status Beacon)
LIgHT OuTPuT
5W
CurrENT CONSuMPTION
12V - 417mA
IP rATINg
IP 65
WEIgHT
77g
PACkINg dIMENSIONS
110x70x70mm
24 Vdc
24V - 208mA
48 Vdc
48V - 104mA
110 Vac
220 Vac
110V - 44mA
220V - 22mA
121
SPECTrA BEACONS - SPECTrA B200SLF STATuS FILAMENT BEACON
sPeCtrA b200sLF stAtUs FILAment beACon
SPECTRA BEACONS
sPeCtrA b200FLF FLAshIng FILAment beACon
SPECTrA BEACONS - SPECTrA B200FLF FLASHINg FILAMENT BEACON
the b200 series comprises a xenon strobe beacon, permanent filament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
the surface mount base is supplied with a neoprene mounting gasket
and can also be supplied with a right angle bracket or with a
tube mounting assembly.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp BA 9 (Flashing Lamp Beacon)
LIgHT OuTPuT
5W @ 1Hz
CurrENT CONSuMPTION
12V - 500mA
IP rATINg
IP 65
WEIgHT
79g
PACkINg dIMENSIONS
110x70x70mm
122
24 Vdc
24V - 250mA
48 Vdc
110 Vac
220 Vac
48V - 120mA
110V - 35mA
220V - 25mA
SPECTRA BEACONS
the b200 series comprises a xenon strobe beacon, permanent filament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
the surface mount base is supplied with a neoprene mounting gasket
and can also be supplied with a right angle bracket or with a
tube mounting assembly.
VOLTAgE
VOLTAgE
10-30 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10 - 30 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Xenon Strobe (Flashing Beacon)
LIgHT OuTPuT
1 Joule @ 0.75Hz
CurrENT CONSuMPTION
10-30V - 135mA
IP rATINg
IP 65
WEIgHT
84g
PACkINg dIMENSIONS
110x100x100mm
110 Vac
110V - 30mA
220 Vac
220V - 20mA
123
SPECTrA BEACONS - SPECTrA B200STr XENON BEACONS
sPeCtrA b200str Xenon beACons
SPECTRA BEACONS
sPeCtrA b200LDA LeD beACons
SPECTrA BEACONS - SPECTrA B200LdA LEd BEACONS
the b200 series comprises a xenon strobe beacon, permanent filament
bulb, blinking filament lamp beacon and a permanent Led array beacon.
the surface mount base is supplied with a neoprene mounting gasket
and can also be supplied with a right angle bracket or with a
tube mounting assembly.
VOLTAgE
VOLTAgE
10-30 VdC
90-230 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
LENS COLOur
Red, Yellow, Amber, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
LED (Permanent Status Beacon)
LIgHT OuTPuT
9 High power LED’s
CurrENT CONSuMPTION
10-30V - 80mA
IP rATINg
IP 65
WEIgHT
78g
PACkINg dIMENSIONS
110x70x70mm
124
90-230 Vac
90-230V - 32mA
SPECTRA BEACONS
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp E14 (Permanent Status Beacon)
LIgHT OuTPuT
25W
CurrENT CONSuMPTION
12V - 2.1A
IP rATINg
IP 65
WEIgHT
262g
PACkINg dIMENSIONS
180x120x120mm
24 Vdc
24V - 1.1A
48 Vdc
48V - 520mA
110 Vac
220 Vac
110V - 217mA
220V - 109mA
125
SPECTrA BEACONS - SPECTrA B300SLF STATuS BEACON
sPeCtrA b300sLF stAtUs beACon
SPECTRA BEACONS
sPeCtrA b300FLF bLInkIng beACon
SPECTrA BEACONS - SPECTrA B300FLF BLINkINg BEACON
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp E14 (Blinking beacon) - 3 frequencies selectable during installation
LIgHT OuTPuT
25W @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION
12V - 1.75A
IP rATINg
IP 65
WEIgHT
283g
PACkINg dIMENSIONS
180x120x120mm
126
24 Vdc
24V - 1.1A
48 Vdc
48V - 0.8mA
110 Vac
110V - 255mA
220 Vac
220V - 130mA
SPECTRA BEACONS
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Xenon Strobe (Flashing Beacon)
LIgHT OuTPuT
5 Joule @ 1Hz
CurrENT CONSuMPTION
12V - 500mA
35mA
IP rATINg
IP 65
WEIgHT
325g
PACkINg dIMENSIONS
180x120x120mm
24 Vdc
24V - 250mA
48 Vdc
110 Vac
220 Vac
48V - 175mA
11V - 70mA
220V -
127
SPECTrA BEACONS - SPECTrA B300STr XENON BEACON
sPeCtrA b300str Xenon beACon
SPECTRA BEACONS
sPeCtrA b300sLh stAtUs hALogen beACon
SPECTrA BEACONS - SPECTrA B300SLH STATuS HALOgEN BEACON
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Halogen Lamp (Permanent Status Beacon)
LIgHT OuTPuT
20W - dc units / 25W - ac units
CurrENT CONSuMPTION
12V - 1.7A
IP rATINg
IP 65
WEIgHT
262g
PACkINg dIMENSIONS
180x120x120 mm
128
24 Vdc
24V - 833mA
110 Vac
220 Vac
110V - 217mA
220V - 109mA
SPECTRA BEACONS
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Halogen Lamp (Blinking Beacon) - 3 frequencies selectable during installation
LIgHT OuTPuT
20W - dc units / 25W - ac units @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION
12V - 1.7A
IP rATINg
IP 65
WEIgHT
279g
PACkINg dIMENSIONS
180x120x120mm
24 Vdc
24V - 1A
110 Vac
110V - 208mA
220 Vac
220V - 116mA
129
SPECTrA BEACONS - SPECTrA B300FLH BLINkINg HALOgEN BEACON
sPeCtrA b300FLh bLInkIng hALogen beACon
SPECTRA BEACONS
sPeCtrA b300sts synChronIseD beACon
SPECTrA BEACONS - SPECTrA B300STS SyNCHrONISEd BEACON
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Xenon Strobe (Synchronised Flashing Beacon)
LIgHT OuTPuT
5 Joule @ 1Hz
CurrENT CONSuMPTION
12V - 500mA
IP rATINg
IP 65
WEIgHT
325g
PACkINg dIMENSIONS
180x120x120mm
130
24 Vdc
24V - 250mA
48 Vdc
48V - 175mA
110 Vac
220 Vac
110V - 70mA
220V - 35mA
SPECTRA BEACONS
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
48 VdC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 VO f1)
LIgHT SOurCE
Xenon Strobe Dual-frequency Flashing Beacon
LIgHT OuTPuT
5 Joule @ 1Hz / 2Hz
CurrENT CONSuMPTION
12V - 500mA
IP rATINg
IP 65
WEIgHT
325g
PACkINg dIMENSIONS
180x120x120mm
24 Vdc
24V - 250mA
48 Vdc
48V - 175mA
131
SPECTrA BEACONS - SPECTrA B300STF duAL FrEquENCy XENON BEACON
sPeCtrA b300stF DUAL FreQUenCy Xenon
beACon
SPECTRA BEACONS
sPeCtrA b300rth rotAtIng hALogen beACon
SPECTrA BEACONS - SPECTrA B300rTH rOTATINg HALOgEN BEACON
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Halogen Bulb (Rotating Beacon) @ 180 RPM
LIgHT OuTPuT
20W - dc units / 25W - ac units
CurrENT CONSuMPTION
12V - 1.72A
IP rATINg
IP 65
WEIgHT
370g
PACkINg dIMENSIONS
180x120x120mm
132
24 Vdc
24V - 0.91A
110 Vac
220 Vac
110V - 216mA
220V - 117mA
SPECTRA BEACONS
the b300 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A105, A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 VO f1)
LIgHT SOurCE
LED (4 rotating, 4 flashing and 1 steady on configuration mode)
LIgHT OuTPuT
16 High output LED array
CurrENT CONSuMPTION
24V - 130mA
IP rATINg
IP 65
WEIgHT
285g
PACkINg dIMENSIONS
180x120x120 mm
110 Vac
110V - 90mA
220 Vac
220V - 50mA
133
SPECTrA BEACONS - SPECTrA B300LdA LEd MuLTI-FuNCTION ArrAy BEACON
sPeCtrA b300LDA LeD mULtI-FUnCtIon ArrAy
beACon
SPECTRA BEACONS
sPeCtrA b400sLF stAtUs beACon
SPECTrA BEACONS - SPECTrA B400SLF STATuS BEACON
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp E14 (Permanent Status Beacon)
LIgHT OuTPuT
40W
CurrENT CONSuMPTION
12V - 3.3A
IP rATINg
IP 65
WEIgHT
510g
PACkINg dIMENSIONS
250x150x150mm
134
24 Vdc
24V - 1.7A
110 Vac
220 Vac
110V - 350mA
220V - 175mA
SPECTRA BEACONS
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 VO f1)
LIgHT SOurCE
Filament Lamp E14 (Blinking Beacon) - 3 frequencies selectable during installation
LIgHT OuTPuT
40W @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION
24V - 1.14A
IP rATINg
IP 65
WEIgHT
535g
PACkINg dIMENSIONS
250x150x150mm
110 Vac
110V - 340mA
220 Vac
220V - 118mA
135
SPECTrA BEACONS - SPECTrA B400FLF BLINkINg BEACON
sPeCtrA b400FLF bLInkIng beACon
SPECTRA BEACONS
sPeCtrA b400str Xenon beACon
SPECTrA BEACONS - SPECTrA B400STr XENON BEACON
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Xenon Strobe (flashing beacon) - 3 flash patterns selectable during installation
LIgHT OuTPuT
15 Joule @ 1Hz / 15 Joule + 10 Joule @ 0.75Hz / 15 Joule + 10 Joule + 10 Joule @ 0.5Hz
CurrENT CONSuMPTION
24V - 1.14A
IP rATINg
IP 65
WEIgHT
696g
PACkINg dIMENSIONS
250x200x150mm
136
48 Vdc
110V - 340mA
110 Vac
220V - 118mA
220 Vac
SPECTRA BEACONS
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Halogen Lamp (Permanent Status Beacon)
LIgHT OuTPuT
35W - dc units / 40W - ac units
CurrENT CONSuMPTION
12V - 2.9A
IP rATINg
IP 65
WEIgHT
510g
PACkINg dIMENSIONS
250x150x150mm
24 Vdc
24V - 1.5A
110 Vac
220 Vac
110V - 350mA
220V - 175mA
137
SPECTrA BEACONS - SPECTrA B400SLH STATuS HALOgEN BEACON
sPeCtrA b400sLh stAtUs hALogen beACon
SPECTRA BEACONS
sPeCtrA b400FLh bLInkIng hALogen beACon
SPECTrA BEACONS - SPECTrA B400FLH BLINkINg HALOgEN BEACON
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Halogen Lamp (Blinking Beacon) - 3 selectable frequencies during installation
LIgHT OuTPuT
35W - dc units @ 0.5Hz / 1Hz / 2Hz 40W - ac units @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION
12V - 3.1A
IP rATINg
IP 65
WEIgHT
535g
PACkINg dIMENSIONS
250x150x150mm
138
24 Vdc
24V - 2.05A
110 Vac
110V - 321mA
220 Vac
220V - 178mA
SPECTRA BEACONS
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Xenon Strobe (Synchronised Flashing Beacon)
LIgHT OuTPuT
15 Joule @ 1Hz
CurrENT CONSuMPTION
24V - 870mA
IP rATINg
IP 65
WEIgHT
696g
PACkINg dIMENSIONS
250x150x150mm
48 Vdc
48V - 480mA
110 Vac
220 Vac
110V - 400mA
220V - 225mA
139
SPECTrA BEACONS - SPECTrA B400STS SyNCHrONISEd XENON BEACON
sPeCtrA b400sts synChronIseD Xenon beACon
SPECTRA BEACONS
sPeCtrA b400rth rotAtIng hALogen beACon
SPECTrA BEACONS - SPECTrA B400rTH rOTATINg HALOgEN BEACON
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Halogen Bulb (Rotating Beacon) @ 180 RPM
LIgHT OuTPuT
35W - dc units / 40W - ac units
CurrENT CONSuMPTION
12V - 3A
IP rATINg
IP 65
WEIgHT
578g
PACkINg dIMENSIONS
250x150x150mm
140
24 Vdc
24V - 1.54A
110 Vac
220 Vac
110V - 338mA
220V - 186mA
SPECTRA BEACONS
the b400 series comprises a xenon strobe beacon, permanent filament
bulb or halogen beacon, blinking filament lamp or rotating beacon and
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
Combination with an A112 and A121
sounder is available.
VOLTAgE
VOLTAgE
10 - 50 VdC
110 VAC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-50 Vdc
LENS COLOur
Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
LED (4 rotating, 4 flashing and steady on configurations)
LIgHT OuTPuT
32 High output L.E.D array
CurrENT CONSuMPTION
24V - 870mA
IP rATINg
IP 65
WEIgHT
845g
PACkINg dIMENSIONS
250x150x150mm
110 Vac
48V - 480mA
220 Vac
110V - 400mA
220V - 225mA
141
SPECTrA BEACONS - SPECTrA B400LdA LEd MuLTI-FuNCTION ArrAy BEACON
sPeCtrA b400LDA LeD mULtI-FUnCtIon ArrAy
beACon
PANEL MOUNT INDICATORS
e2s 22D PAneL moUnt InDICAtors
PANEL MOuNT INdICATOrS - E2S 22d PANEL MOuNT INdICATOrS
the e2s-22d range includes buzzers, combination units and pilot lights
featuring super bright multichip Leds. ingress protection to iP 65,
low current consumption and unsurpassed reliability under extreme
conditions are all standard features of the e2s-22d range. the range
utilises screw terminals with wire guards for ease of installation and the
ability to daisy chain the lights into an array.
VOLTAgE
VOLTAgE
24 VAC/dC
110 VAC/dC
220 VAC/dC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vac/dc
duTy CyCLE
50 000hrs
SOuNd OuTPuT
91 dB(A) at 1m
FLASH rATE
2Hz
APP. rANgE
20m
CurrENT CONSuMPTION
24V - 20-80mA
LIgHT COLOurS
Red, Amber, Green, Blue & White
IP rATINg
IP 65
WEIgHT
90g
PACkINg dIMENSIONS
60x35x35mm
142
48 Vac/dc
110 Vac/dc
220 Vac/dc
48V - 20-80mA
110V - 18-25mA
220V - 18-25mA
PANEL MOUNT INDICATORS
the e2s-28d range consists of the highest quality Floyd bell continuous
tone and dual tone panel mounted piezo buzzers. the built-in volume
control provides variable attenuation up to 20db(a). the terminals are
standard 6.35 mm quick- connect blades for push-on or direct solder
attachment.
VOLTAgE
VOLTAgE
30 VdC
110 VAC/dC
220 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
95 dB(A) at 1m
FLASH rATE
2 900Hz
APP. rANgE
20m
CurrENT CONSuMPTION
30V - 20mA
IP rATINg
IP 65
WEIgHT
90g
PACkINg dIMENSIONS
60x45x45mm
48 Vdc
110 Vac
220 Vac
48V - 20mA
110V - 40mA
220V - 40mA
143
PANEL MOuNT INdICATOrS - E2S 28d PANEL MOuNT BuzzErS
e2s 28D PAneL moUnt bUzzers
panel mount indicators
Sirenco Panel Mount 22mm indicators
panel mount indicators - Sirenco Panel Mount 22mm Indicators
The range includes buzzers, combination units and pilot lights featuring
super bright multichip LEDs. Ingress protection to IP 65, low current
consumption and unsurpassed reliability under extreme conditions are all
standard features of this range. The range utilises screw terminals with
wire guards for ease of installation and the ability to daisy chain the light
into an array.
Voltage
Voltage
12 Vac/dc
24 Vac/dc
220 Vac
380 Vac
Voltage
110 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vac/dc
Duty Cycle
50 000hrs
Current Consumption
12V - 20-80mA
25mA
Light Colours
Red, Amber, Green, Blue & White
IP Rating
IP 65
Weight
90g
Packing Dimensions
60x60x155mm
144
24 Vac/dc
110 Vac
220 Vac
380 Vac
24V - 20-80mA
110V - 18-25mA
220V - 18-25mA
380V - 18-
PANEL MOUNT INDICATORS
the range includes buzzers, combination units and pilot lights featuring
super bright multichip Leds. ingress protection to iP 65, low current
consumption and unsurpassed reliability under extreme conditions are
all standard features of this range. the range utilises screw terminals
with wire guards for ease of installation and the ability to daisy chain the
buzzer into an array.
VOLTAgE
VOLTAgE
VOLTAgE
12 VAC/dC
24 VAC/dC
110 VAC
220 VAC
380 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vac/dc
duTy CyCLE
50 000hrs
SOuNd OuTPuT
91 dB(A) at 1m
FrEquENCy
2 900Hz
APP. rANgE
20m
CurrENT CONSuMPTION
12V - 20-80mA
IP rATINg
IP 65
WEIgHT
90g
PACkINg dIMENSIONS
60x60x155mm
24 Vac/dc
110 Vac
220 Vac
380 Vac
24V - 20-80mA
110V - 18-25mA
220V - 18-25mA
380V - 18-25mA
145
PANEL MOuNT INdICATOrS - SIrENCO PANEL MOuNT 22MM BuzzEr
sIrenCo PAneL moUnt 22mm bUzzer
panel mount indicators
Sirenco Panel Mount 22mm Combination Unit
panel mount indicators - Sirenco Panel Mount 22mm Combination Unit
The range includes buzzers, combination units and pilot lights featuring
super bright multichip LEDs. Ingress protection to IP 65, low current
consumption and unsurpassed reliability under extreme conditions are
all standard features of this range. The range utilises screw terminals
with wire guards for ease of installation and the ability to daisy chain the
combination unit into an array.
Voltage
Voltage
Voltage
12 Vac/dc
24 Vac/dc
110 Vac
220 Vac
380 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
12 Vac/dc
Duty Cycle
50 000 Hrs
Sound Output
91 dB(A) at 1m
App. Range
20m in still air on open field
24 Vac/dc
Current Consumption
12V - 20-80mA
Light Colours
Red, Amber, Blue, Green & White
IP Rating
IP 65
Weight
90g
Packing Dimensions
65x68x155mm
146
24V - 20-80mA
110 Vac
220 Vac
380 Vac
110V - 18-25mA
220V - 18-25mA
380V - 18-25mA
SPECTRA TRAFFIC LIGHTS
the b350 series of traffic light beacons is avaliable in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
compact housing is ideal for space constrained applications or for
mounting directly onto machinery etc.
VOLTAgE
VOLTAgE
10-30 VdC
90-230 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
LENS COLOur
Red, Amber & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
High output LED
LIgHT OuTPuT
15 x High-bright LED array
CurrENT CONSuMPTION
10-30V - 140mA
IP rATINg
IP 65
WEIgHT
230g
PACkINg dIMENSIONS
120x120x150mm
90-230 Vac
90-230V - 10-40mA
147
SPECTrA TrAFFIC LIgHTS - SPECTrA B350TLA LEd ArrAy TrAFFFIC LIgHT
sPeCtrA b350tLA LeD ArrAy trAFFIC LIght
SPECTRA TRAFFIC LIGHTS
sPeCtrA b350tsb FILAment LAmP trAFFIC LIght
SPECTrA TrAFFIC LIgHTS - SPECTrA B350TSB FILAMENT LAMP TrAFFIC LIgHT
the b350 series of traffic light beacons is available in single e14 filament
bulb or high output Led array version. the compact housing is ideal for
space constrained applications or for mounting directly onto machinery
etc.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
230 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Yellow, Blue, Clear, Amber & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp E14
LIgHT OuTPuT
15W
CurrENT CONSuMPTION
12V - 1.25A
IP rATINg
IP 65
WEIgHT
210g
PACkINg dIMENSIONS
120x120x150mm
148
24 Vdc
24V - 625mA
48 Vdc
110 Vac
220 Vac
48V - 313mA
110V - 130mA 220V - 65mA
SPECTRA TRAFFIC LIGHTS
the b450 series of traffic light beacons is avaliable in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
compact housing is ideal for space constrained applications or for
mounting directly onto machinery etc.
VOLTAgE
VOLTAgE
10-30 VdC
90-230 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
LENS COLOur
Red, Amber & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
High output LED traffic light
LIgHT OuTPuT
24 x LED array
CurrENT CONSuMPTION
10-30V - 175mA
IP rATINg
IP 65
WEIgHT
410g
PACkINg dIMENSIONS
150x180x150mm
90-230 Vac
90-230V - 15-40mA
149
SPECTrA TrAFFIC LIgHTS - SPECTrA B450TLA LEd ArrAy
sPeCtrA b450tLA LeD ArrAy
SPECTRA TRAFFIC LIGHTS
sPeCtrA b450tsb FILAment LAmP
SPECTrA TrAFFIC LIgHTS - SPECTrA B450TSB FILAMENT LAMP
the b450 series of traffic light beacons is available in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
compact housing is ideal for space constrained applications or for
mounting directly onto machinery etc.
VOLTAgE
VOLTAgE
24 VdC
110 VAC
230 VAC
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
24 Vdc
LENS COLOur
Red, Amber, Blue, Yellow, Clear & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Filament Lamp E27 traffic light
LIgHT OuTPuT
25W
CurrENT CONSuMPTION
24V - 1.04A
IP rATINg
IP 65
WEIgHT
380g
PACkINg dIMENSIONS
150x180x150mm
150
110 Vac
110V - 217mA
230 Vac
220V - 108mA
SPECTRA TRAFFIC LIGHTS
the b450 series of traffic light beacons is available in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
compact housing is ideal for space constrained applications or for
mounting directly onto machinery etc.
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
230 VAC
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
LENS COLOur
Red, Amber, Blue, Yellow, Clear & Green
HOuSINg & LENS
Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE
Dual Fialment Lamp E14 Traffic Light
LIgHT OuTPuT
2x15W
CurrENT CONSuMPTION
12V - 1.25A
65mA
IP rATINg
IP 65
WEIgHT
395g
PACkINg dIMENSIONS
150x180x150mm
24 Vdc
24V - 625mA
48 Vdc
115 Vac
220 Vac
48V - 312mA
110V - 130mA
220V -
151
SPECTrA TrAFFIC LIgHTS - SPECTrA B450TdB duAL FILAMENT LAMP
sPeCtrA b450tDb DUAL FILAment LAmP
Spectra sounders & combination units
Spectra B300SND & B400SND sounder
Spectra sounders & combination units - Spectra B300SND & B400SND sounder
This is a high output signalling horn suitable for a variety of general
signalling applications. This unit reproduces the alert sound of traditional
electro-mechanical equivalents but without any of the reliability issues.
This sounder can be configured with the B350 or B450 ttraffic light
beacons for complete audiovisual signalling.
Voltage
Voltage
10-30 Vac/dc
40-260 Vac/dc
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
10-30 Vac/dc
Duty Cycle
Continuous
40-260 Vac/dc
Sound Output
110 dB(A) at 1m
Sound Frequency
1 200 / 500Hz (depends on tone selection)
Sound Select
3 user selectable tones with a 2 stage alarm option
App. Range
800m in still ari on open field
Current Consumption
10-30V - 100mA
IP Rating
IP 65
Weight
500g
Packing Dimensions
150x150x120mm
152
40-260V - 36mA
SPECTRA SOUNDERS & COMBINATION UNITS
sPeCtrA h100b horn & h100bL LeD Combo
VOLTAgE
VOLTAgE
10-30 VAC/dC
40-260 VAC/dC
SPECTrA SOuNdErS & COMBINATION uNITS - SPECTrA H100B HOrN & H100BL LEd COMBO
this compact horn reproduces the alert sound of the larger traditional
electromechanical equivalent but without any of the reliability issues.
the unit has a high output and the signal is suitable for a variety of
installation types.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
10-30 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
100 dB(A) at 1m
SOuNd FrEquENCy
1200 / 500Hz (depends on tone selection)
SOuNd SELECT
3 user selectable tones
APP. rANgE
300m in still air on open field
CurrENT CONSuMPTION
10-30V - 24mA
40-260V - 20mA
CurrENT CONS. (COMBO)
12V - 84mA
24V - 104mA
LENS COLOur
Red, Amber, Green, Yellow or Blue
IP rATINg
IP 65 - Sounders
IP 65 - Combo
WEIgHT
118g - Sounder
184g - Combo
PACkINg dIMENSIONS
80x100x80mm - Sounder
150x100x100mm - Combo
40-260 Vac/dc
110V - 138mA
220V - 42mA
153
Spectra sounders & combination units
Spectra H100T Trumpet Horn & H100TX xenon Combo
Spectra sounders & combination units - Spectra H100T Trumpet Horn & H100TX xenon Combo
This trumpet horn reproduces the alert sound of the larger traditional
electromechanical equivalent but without any of the reliability issues.
The unit has a high output and the signal is suitable for a variety of
installation types.
Voltage
Voltage
12 Vdc
24 Vdc
110 Vac
220 Vac
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 Vdc
Duty Cycle
Continuous
Sound Output
100 dB(A) at 1m
Sound Frequency
1 200 / 500Hz (Depends on tone selection)
110 Vac
Sound Select
3 user selectable tones
App. Range
300m in still ari on open field
Current Consumption
10-30V - 92mA 40-260V - 20mA
Current Cons. (Combo)
24V - 145mA 110V - 49mA Lens Colour
Red, Amber, Green, Yellow or Blue
220 Vac
220V - 30mA
IP Rating
IP 65 - Sounders IP 65 - Combo
Weight
148g - Sounders 219g - Combo
Packing Dimensions
180x100x100mm - Sounders 250x100x100mm - Combo
154
SPECTRA SOUNDERS & COMBINATION UNITS
sPeCtrA h110t trUmPet horn & h110tX
Xenon Combo
VOLTAgE
VOLTAgE
12 VdC
24 VdC
110 VAC
220 VAC
SPECTrA SOuNdErS & COMBINATION uNITS - SPECTrA H110T TruMPET HOrN & H110TX XENON COMBO
this trumpet horn reproduces the alert sound of the larger traditional
electromechanical equivalent but without any of the reliability issues.
the unit has a high output and the signal is suitable for indoor and
outdoor installations.
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
SPECIFICATIONS
VOLTAgE
12 Vdc
duTy CyCLE
Continuous
SOuNd OuTPuT
110 dB(A) at 1m
SOuNd FrEquENCy
1200 / 500Hz (Depends on tone selection)
SOuNd SELECT
3 user selectable tones
APP. rANgE
500m depending on tone selection
CurrENT CONSuMPTION
10-30V - 105mA
40-260V - 36mA
CurrENT CONS. (COMBO)
12V - 2.24A
24V - 1A
LENS COLOur
Red, Amber, Green, Yellow or Blue
IP rATINg
IP 65 - Sounders
24 Vdc
110 Vac
220 Vac
110V - 49mA
220V - 135mA
IP 65 - Combo
WEIgHT
341g - Sounders
678g - Combo
PACkINg dIMENSIONS
350x150x150mm - Sounder
480x150x150mm - Combo
155
Spectra sounders & combination units
Spectra Signal Tower Stack Lights 70mm
Spectra sounders & combination units - Spectra Signal Tower Stack Lights 70mm
The signal tower range can accommodate up to seven modules. Filament,
LED, Xenon and sound modules are available.
Voltage
Voltage
24 Vac/dc
110 Vac
220 Vac
-
Please visit our website for all the latest information,
www.kama.co.za.
All dimensions in mm
Specifications
Voltage
24 Vac/dc
Duty Cycle
Continuous
110 Vac 220 Vac
Sound Output
2 tone - 84 dB(A) at 1m 16 tone - 90 dB(A) at 1m
Sound Frequency
2 600Hz (Depends on tone selection and sound module)
Sound Select
2 tones or 16 tones
App. Range
200m depending on tone selection
Current Consumption
24V - 50-210mA 110V - 25-43mA
220V - 15-85mA
Current Cons. (Combo)
24V - 84.5A 110V - 78mA 220V - 78mA
Lens Colour
Red, Amber, Green, Yellow, Clear or Blue
IP Rating
IP 64
Weight
Depends on total modules
Packing Dimensions
Depends on total modules
156
TURBO BLOWER
High volume turbo blower used for warehouses, malls and large
structures when situations call for a higher airflow. Precision-balanced
cast aluminum blade runs at only 1800 rpm to significantly reduce stress
and chance of failure. easy one step tilt adjustment for fast, easy set-up.
retractable handle for push-pull operation. rugged 32mm powder
coated steel frame. Pneumatic tyres for uneven terrain. optional bigbore
exhaust diverter.
Please visit our website for all the latest information,
www.kama.co.za.
SPECIFICATIONS
ENgINE
Honda 5.5 Hp / 4.1 kW GX series with oil Alert Protection
FAN
16”
ruN TIME
58min
PPV AIrFLOW
21”
24”
17 099 m³/hr
29 355 m³/hr
30 039 m³/hr
WEIgHT
29kg
40kg
52kg
MOdELS
Engine blower 16”
Engine blower 21”
Engine blower 24”
MOTOr
5.5Hp/4 1 kW Petrol
Honda Engine
5.5Hp/4 4.1 kW Petrol
Honda Engine
Engine 5.5Hp/4 4.1 Petrol
Honda Engine
rPM
2900r/min
1450r/min
1450r/min
FAN SIzE
400 mm
7 blade
540 mm
7 blade
600 mm
9 blade
PACkINg dIMENSIONS
A : 543 (h)
B : 518 (w)
C : 442 (d)
A : 651 (h)
B : 626 (w)
C : 506 (d)
A : 747 (h)
B : 721 (w)
C : 541 (d)
(refer to diagram)
157
TurBO BLOWEr - SIrENCO PETrOL ENgINE POWErEd TurBO BLOWEr
sIrenCo PetroL engIne PowereD tUrbo bLower
turbo blower
Sirenco Electric Powered Turbo Blower
turbo blower - Sirenco Electric Powered Turbo Blower
For ventilation at factory buildings, construction sites, warehouses,
mining & industry. Smoke ejection - clears basements, confined areas
with ducting. Housed in heat resistant lexan. Stackable for more air force
and easy storage. Optional duct adapter for use with duct in confined
space applications. Optional door bar and hanger kit for suspending
doorways or windows.
Voltage
Voltage
230 Vac
380 Vac
Specifications
Engine
Motor 1.2kW 50/60Hz - 16”- 20” - 24”
Fan
16”
20”24”
Run time
58min
PPV Airflow
10 360 m³/hr
16 150 m³/hr
18 360 m³/hr
Weight
26kg
38kg 45kg
Models
Electric Blower 16”
Electric Blower 20”
Electric Blower 24”
Motor
1.2kW, 220, 380V
1.2kW, 220, 380V
1.5kW, 220, 380V RPM
2 900r/min
1 450r/min
1 450r/min
FAn size
400 mm
7 blade
500 mm
9 blade
600 mm
9 blade
Packing Dimensions
A: 480 (h))
B: 460 (w)
C: 320 (d)
A: 650 (h)
B: 630 (w)
C: 430 (d)
A: 730 (h)
B: 710 (w)
C: 490 (d)
(refer to diagram)
158
notes
159
Intrinsically Safe Sounders and Beacons • Signal Towers • Airhorns
Flameproof Devices • Marine Devices • Beacons • Traffic Lights
Sirens • Bells • Hooters • Electronic Sounders
www.kama.co.za
Voice Sounders • Combination Units • Beacons