Tecalemit 2 Post Lifts
Tecalemit offers a comprehensive range of 2 post vehicle lifts ranging from 2800kg to 5000Kg
lifting capacity. All Tecalemit lifts are manufactured in our European factories and offer proven
performance and durability. Our range features both Electro-Mechanical and Hydraulic lifts and
includes a comprehensive coverage of configurations to accommodate all vehicle types.
Mechanical 2 post lifts
Azur 2.8t
mechanical
2 post lift
with base
frame
Azur 3.0t
mechanical
2 post lift
without
base-frame
Key features:
• Suitable for
most passenger
cars and car
derived vans
• Automatic arm
locking device
• Self lubrication nuts • 5 year warranty on nuts
• Extremely low lifting height (90mm)
• Foot protection device fitted to lifting arms
Key features:
• Suitable for
lifting most
passenger cars
and car derived
vans
• Automatic arm locking
• 5 year warranty on self lubricating Nylatron operating and safety nuts
• Low minimum lifting pad height of 95mm
• Foot/toe protection device fitted to lifting arms • Clear floor between columns
Azur SF 8907 2 post lift:
Azur SF 9230 2 post lift:
The SF 8907 is Tecalemit’s long standing entry level 2 post mechanical
lift. Suitable for lifting a broad range of cars and car derived vans the SF
8907 offers proven quality and reliability and outstanding value for money.
The operating nuts carry a special 5 year warranty and the recently
updated arm design now accommodates many vehicles with body styling
kits and lower skirts covering the sill area.
The SF 9230 is a 3.0t broad application electro-mechanical 2 post lift,
suitable for lifting most passenger cars, car derived vans and many light
commercial vehicles. It is ideally suited for use in workshops where
regular use of equipment such as transmission jacks and oil drainers
demands a clear access between the lifting columns. The SF 9230 has a
heavy duty column design fabricated from FE430 grade steel and 2
electronically synchronised powerful 2.6kw motors. The /SP variant
features an adjustable lifting pad with ratchet locking mechanism.
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Net weight
Power supply
Fused isolator rating
Ordering information
Azur 2.8t 2 post mechanical lift 3Ph
with baseframe
90mm
1900mm - 1960mm
4.0Kw
2160mm
2800kg
55 secs
635kg
400V/50Hz/3Ph
20 amp
Part number
SF 8907
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Net weight
Gross weight
Power supply
Fused isolator rating
95mm
1885mm – 1945mm
2x2.6kw
2155 / 2795mm
3000kg
55 secs
600kg
670kg
400V/3Ph/50Hz
20 amp
4215
1945
95
2200 / 2840
500
3260 / 3900
990
1450
590
2155 / 2795
990
2
195
1885
2600
500
460
See accessories on back page
Ordering information
Part number
Azur 3.0t 2 post mechanical lift 3Ph
without base frame
SF 9230
Azur 3.0t 2 post mechanical lift with ratchet lift pad
adjustment 3Ph without base frame
SF 9230/SP
Azur 3.6t
mechanical
2 Post Lift
with base
frame
Key features:
• Suitable for
lifting most
passenger cars
and car derived
vans
• Automatic arm
locking
• 5 year warranty on self lubricating Nylatron operating and safety nuts
• Low minimum lifting pad height of just 90mm
• Foot /toe protection device fitted to lifting arms
Key features:
• Heavy duty lift
suitable for most
passenger cars
and car derived
vans
• Low minimum pad height 90mm • Automatic arm locking
• Twin motor with shaft drive synchronisation symmetric lifting arm design
• Wide lift for increased vehicle access
Azur SF 9010/32 post lift:
Azur SF 9035 2 post lift:
The best selling SF 9010/32 is suitable for lifting most passenger cars and
car derived vans up to a gross weight of 3200kg. The SF 9010/32 has a
heavy duty column design fabricated from FE430 grade steel and powerful
4.2kw motor synchronised with the slave column via a mechanical chain
drive. The lifts load and safety nuts are manufactured from resilient
Nylatron and work in conjunction with the precision engineered cold rolled
screw manufactured from C40 high carbon steel. Minimum floor
requirements for installation are a level 150mm thickness of C25 concrete.
The Azur SF 9035 3.6t electro-mechanical lift has a higher lifting capacity,
very wide access between the lifting columns and a symmetric arm
design for lifting of longer wheelbase vehicles. The new /SP variant
features an adjustable lifting pad with ratchet locking mechanism. The
Azur SF 9035 is not an up-rated car lift, it is a genuine heavy duty lift with
2 x 2.6kw motors and a net weight of 900kg, over 20% heavier than many
lifts marketed at the same lifting capacity.
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Net weight
Power supply
Gross weight
Fused isolator rating
90mm
1900mm -1960mm
4.2kw
2160mm
3200kg
55 secs
600kg
400V/50Hz/3Ph
650kg
20 amp
Ordering information
Part number
Azur 3.2t 2 post mechanical lift 3ph with
base-frame
SF 9010/32
Azur 3.2t 2 post mechanical lift with ratchet lift pad
adjustment 3ph with base-frame
SF 9010/32/SP
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Net weight
Gross weight
Power supply
Fused isolator rating
Ordering information
Azur 3.6t 2 post mechanical lift 3Ph with
base frame
Azur 3.6t 2 post mechanical lift with ratchet
lift pad adjustment 3Ph with base frame
90mm
1880mm – 1940mm
2 x 2.6kw
2754mm
3600kg
50 secs
900kg
930kg
400V, 3Ph
20 amp
Part number
SF 9035
SF 9035/SP
See accessories on back page
Azur 3.2t
mechanical
2 post lift
Mechanical 2 post lifts
BEST SELLER
3
Mechanical 2 post lifts
Azur 4.0t
mechanical
2 post lift
without
base frame
Azur 5t
Mechanical
2 Post Lift
without
Baseframe
Key features:
• Electromechanical
operation
• Twin motor
• Clear floor between lifting columns • Symmetric lifting arms
• Low minimum lifting pad height
Key features:
• Automatic arm
locking
• Option of
lifting arm
configurations
• Low minimum lifting pad height of just 110mm
• Automatic lubrication of moving parts
• Electronic synchronisation
• Symmetric arms extending to over 1800mm
• Single screw pads
Azur SF 9224 2 post lift:
The SF 9224 is a heavy duty 4.0t capacity versatile 2 post lift. With a
symmetric lifting arm configuration this lift is suitable for use with a large
range of passenger vehicles and light commercial vehicles. The SF 9224
has heavy duty steel columns and 2 powerful 2.6kw motor synchronised
via electronic sensors which ensure absolutely level lifting carriages. The
clear floor design allows access for transmission jacks, oil drainers and
other items of workshop equipment.The /SP variant features an adjustable
lifting pad with ratchet locking mechanism.
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Net weight
Gross weight
Power supply
Fused isolator rating
See accessories on back page
Ordering information
Azur 4.0t 2 post mechanical lift 3Ph without
base frame
Azur 4.0t 2 post mechanical lift with ratchet
lift pad adjustment 3Ph without base frame
4
103mm
1900mm - 1960mm
2 x 2.6kw
2610mm – 2960mm
4000kg
60 secs
690kg
780kg
400V 3Ph 50Hz
20 amp
Part number
SF 9224
SF 9224/SP
Azur SF 9252 2 post lift:
The SF 9252 is a true heavy duty 2 post lift. Designed to lift Vans and light
commercial vehicles up to a gross vehicle weight of 5000kg. The column
construction is drawn from our mobile column lifts and the powerful 4Kw
motors provide smooth lifting and lowering regardless of the load
configuration on the lift. The SF 9251 provides an alternative arm
configuration aimed at commercial vehicles where chassis rails are
located further inboard on the vehicle.
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Lifting/lowering time
Power supply
Net weight
Gross weight
Fused isolator rating
110mm
1900mm
2 x 4.5kw – 3Ph
2820mm
5000kg
40 secs
400V/ 50Hz/3Ph
1290kg
1450kg
20 amp
Ordering information
Part number
Azur 5.0t 2 post lift with 3 stage arms
without base frame
SF 9252
Azur 5.0t 2 post lift with articulated arms without
base frame
SF 9251
SF9252 drawing
Sentinel
3.2t
Hydraulic 2
post lift
without
baseframe
Key features:
• Suitable for
lifting most
passenger
cars and car derived vans
• Automatic arm locking • Hydraulic operation
• Very low minimum lifting pad height of 90mm
• Foot/toe protection device fitted to lifting arms
• Structural base frame between columns • Weatherproof option available
Key features:
• Mechanical &
Hydraulic safety
systems
• Very low minimum pad height of 95mm
• 3 Stage asymmetric arm design to accommodate comprehensive
range of vehicles
• Totally clear floor between lifting columns
• Option of extra-height clearance.
Hydraulic 2 post lifts
Sentinel
3.2t
hydraulic 2
post lift
with base
frame
Sentinel SF 8935 2 post lift:
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Weight
Net weight
Power supply
90mm
1920mm
2.2kw
2230mm
3200kg
45 secs
710kg
895kg
400V 3Ph 50Hz + 1Ph
Ordering information
Sentinel 3.2t 2 post hydraulic lift 3Ph
Sentinel 3.2t 2 post hydraulic lift 1Ph
Sentinel 3.2t 2 post hydraulic lift with ratchet
lift pad adjustment 3Ph with base frame
Part number
SF 8935
SF 8935/1
SF 8935/SP
The SF 9023 is a hydraulically operated 2 post lift with a lifting capacity
of 3200kg. The lift design affords the operator a clear workshop floor
between the lifting columns allowing for the easy movements of
equipment such as oil drainers and transmission jacks.
The proven design of the SF 9023 will ensure years of trouble free service
whilst lifting most cars, car derived vans and smaller light commercial
vehicles. Should operators require clearance for higher bodied vans an
increased height kit is available at additional cost.
Technical Specification
Pad height min
Maximum lifting height:
Motor supply:
Drive through width:
Maximum load:
Maximum lifting time:
Net weight:
Power supply:
Fused isolator rating:
Ordering information
Sentinel 3.2t 2 post hydraulic lift without
base frame 3Ph
Sentinel 3.2t 2 post hydraulic lift without
base frame 1Ph
95mm
1995mm
2.2kw
2650mm
3200kg
45 seconds
700kg
400v, 50Hz, 3ph
20 amp
Part number
SF 9023
SF 9023/1
90
190
55
1980
1920
2580
2600
Sentinel SF 9023 3.2t Hydraulic 2 post lift:
See accessories on back page
The SF 8935 generation of lifts have been in the Tecalemit range for over
14 years and can be found in workshops across the UK giving outstanding
daily service to thousands of users. The SF 8935 is a 3.2T electro-hydraulic
2 post lift suitable for lifting most passenger cars and car derived vans. It
has a low minimum lifting pad height of 90mm making it particularly
suitable for vehicles with lower ground clearance. Additional lifting pad
extensions will be required when used for lifting vans and 4x4 vehicles.
3200
600
755
1050
960
450
2230
5
5
Key features:
• Electrohydraulic
operation
• Asymmetric lifting arms • Structural base frame
• Electronically controlled safety latches • Low pad height of 90mm
Sentinel SF 9236 2 post lift:
The SF 9236 has been developed for general servicing work in garages
covering a broad range of vehicles including passenger cars and shorter
wheelbase light goods vehicles. The heavy duty base frame ensures a
stable lifting platform and the low minimum lifting pad height ensures
that even vehicles with low ground clearance can be accommodated on
the lift. The 3 stage lifting arm design makes loading the lift easier,
particularly for wider vehicles. 1 phase options are available.
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Net weight
Gross weight
Power supply
Ordering information
Sentinel 3.6t 2 post hydraulic lift 3Ph
with base frame
Sentinel 3.6t 2 post hydraulic lift 1Ph with
base frame
90mm
1915mm
2.2kw
2380mm
3600kg
45 secs
630kg
660kg
400V 3Ph 50Hz/11 amp
230V 1Ph 50Hz/16amp
Part number
SF 9236
SF 9236/1
Sentinel
4.0t
Hydraulic 2
Post Lift
with base
frame + 3
stage arms
SF 9207
Key features:
• Electrohydraulic operation
• Asymmetric lifting arms 3 stages for lifting a wider range of vehicles
• Rapid lifting time
• Structural base frame
• Electronically controlled safety latches
Sentinel SF 9207 2 post lift:
The SF 9207 is mounted on a heavy duty steel base frame providing a
stable lifting platform and the minimum lifting pad height of only 100mm
ensures that even vehicles with low ground clearance can be
accommodated on the lift. The lift has 3 stage arms enabling the lift to be
used on a wider range of vehicles. Minimum floor requirements for
installation are a level 150mm thickness of C25 concrete. Power supply of
400V 3Ph via a 20 amp fused isolator. Single phase options available.
Both single and three phase versions of the SF 9207 lift requires an
electrical supply with neutral and earth.
Technical Specification
Pad Pad Height Min
Raised Height
Motor Supply
Drive Through Width
Maximum Load
Lifting / Lowering Time
Net Weight
Power Supply
Ordering information
Sentinel 4.0t 2 Post Hydraulic Lift 3Ph with
base frame(3 stage arms)
Sentinel 4.0t 2 Post Hydraulic Lift 1Ph with
base frame (3 stage arms)
00
-11
1200
600
30
13
075
3381
3484
2760
2878
See accessories on back page
100mm
1800mm
1.8kw
2551mm
4000kg
60 secs / 75 secs
720kg
400V 3Ph 50Hz
230V 1Ph 50Hz
1800
Hydraulic 2 post lifts
Sentinel
3.6t
hydraulic 2
post lift
with base
frame
100-145
6
Part number
SF 9207
SF 9207/1
Part number
SF 9025
SF 9025/1
Technical Specification
Pad height min
Raised height
Motor supply
Drive through width
Maximum load
Maximum lifting time
Net weight
Gross weight
Power supply
Hydraulic 2 post lifts
125mm
1950mm
2.2kw
2525mm
4000kg
40 secs
900kg
980kg
400V 3Ph 50Hz/11 amp
230V 1Ph 50Hz/16amp
5012mm min
Overhead access clearance
Ordering information
Part number
Sentinel 4.0t 2 post hydraulic lift 3Ph without
base frame
SF 8893
Sentinel 4.0t 2 post hydraulic lift 1Ph without
base frame
SF 8893/1
2756
2800
3370
2525
See accessories on back page
Ordering information
Sentinel 5.0t 2 post hydraulic lift 3Ph
Sentinel 5.0t 2 post hydraulic lift 1Ph
Drive through width
Maximum load
Maximum lifting time
Gross weight
Net weight
Power supply
1405
Overhead access clearance
125mm
1965mm
3.0kw 3Ph
2.2kw 1Ph
2725mm
5000kg
40 secs - 55 secs
1100kg
1010kg
400V 3Ph 50Hz/11 amp
230V 1Ph 50Hz/16 amp
5612mm min
The very popular SF 8893 has been revamped with a new symmetric lifting
arm design to accommodate an even larger range of vehicles, passenger
vehicles and car derived vans. The SF 8893 offers a clear access between
the columns with the hydraulic lines and safety cables being carried in an
overhead gantry. The fixed internal clearance height is 4342mm however
a further 500mm of workshop roof height is required to allow clearance
for installation of the lift. Lifting pad extensions for higher ground
clearance vehicles are available. 1 Phase options are available.
1405
Technical Specification
Pad height min
Raised height
Motor supply
Sentinel SF 8893 2 post lift:
725
The SF 9025 is a 5.0t heavy duty 2 post lift suitable for lifting light
commercial vehicles. Long wheelbase vehicles such as Sprinter and Boxer
type vans can be lifted with the symmetric arms and the drive through
width of 2725mm accommodates most LGV vehicles. The SF 9025 has an
extra high overhead gantry allowing a clearance of 4942mm. The roof
height must be a further 500mm to allow for installation. Additional lifting
pad extensions are available for 4x4 vehicles and vans.
725
Sentinel SF 9025 2 post lift:
Key features:
• Baseless
design with
clear floor
between columns
• Suitable for lifting light goods vehicles up to 4000kg GVW
• Symmetric lifting arm design • Automatic arm locking
• 24v dead man controls • Overload safety valve
4342
4512
Key features:
• Baseless design with
a clear floor between
columns
• Symmetric arm design for
lifting long wheelbase vehicles • Suitable for light goods vehicles
• Automatic arm locking • 24V ‘dead man’ controls • Overload safety valve
Sentinel
4.0t
hydraulic 2
post lift
without
base frame
125 / 1950
Sentinel 5.0t
hydraulic 2 post lift
without base
frame
7
Accessories
Part No:
OA 50740
OA 50733
OA 50734
OA 50735
OA 50736
OA 60293
OA 61133
20mm pad
extension
60mm pad
extension
100mm pad
extension
170mm pad
extension
250mm pad
extension
150mm pad
extension
low ceiling
device
SF 8907
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 9010/32
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 9252
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 9035
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 9035
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 9207
N/A
N/A
N/A
N/A
N/A
Optional
N/A
SF 9224
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 9230
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 8935
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 9023
Optional
Standard
Optional
Optional
Optional
N/A
N/A
SF 9236
Optional
Standard
Optional
Optional
Optional
N/A
Optional
SF 8893
Optional
Standard
Optional
Optional
Optional
N/A
N/A
SF 9025
Optional
Standard
Optional
Optional
Optional
N/A
N/A
Mechanical
Hydraulic
/SP Optional Lift arm ratchet system
Tecalemit after sales support
Available for most Tecalemit 2 post lifts the ratchet system is a
means of rapidly raising the lifting pad height without the need for
pad extensions. By pushing down on the lever arm the pad height
can be raised by up to 120mm.
Tecalemit provides nationwide after sales support for users of Tecalemit
equipment. This support includes general servicing and maintenance
re-calibration of equipment and supply of a comprehensive range of
spare parts and accessories for your Tecalemit equipment.
This option must be ordered at the time your new lift is ordered.
Tecalemit’s Terms & Conditions of sale can be viewed at: www.tecalemit.co.uk/t&cs.html
and will apply for any sales transactions.
Tecalemit contact information
Sales:
Service:
Fax:
Email:
Web:
00 44 (0) 1752 219 111
00 44 (0) 1752 219 100
00 44 (0) 1752 219 128
sales@tecalemit.co.uk
www.tecalemit.co.uk
Tecalemit Garage Equipment Company Limited
Eagle Road, Langage Business Park, Plymouth, UK PL7 5JY
All information in this document is correct at time of publication. Tecalemit reserves the right to
amend and alter specifications without prior notice. Please confirm any critical requirements
with your supplier at time of ordering. ©Tecalemit 2013 Issue No: 2PL 102013/2
City and Guilds and the City and Guilds logo are the trade marks of the City and Guilds of London
Institute and are used under licence.
Certificate No: 880 331