Slimline
Slimline multi-point for
safety and security
High performance, multi-functional systems
Surelock Slimline systems enable you to choose a multi-point system tailored to your
requirement. The systems:
• Provide the level of security that you require - from burglary to terrorist attack.
• E
nsures the ‘Duty of Care’ conformance that you need for security, fire, blast, ballistic,
panic or emergency exit.
• Can enforce an entry/exit procedure and observe your final door status requirement.
Slimline Systems are
• N
on-handed. You do not have to specify whether the system is for a right- or left-hand
door, unless the enhancement(s) you choose require it.
• Suitable for both inward- and outward-opening doors
• Tested to over one million cycles.
• Suitable for door heights of up to 2200 mm (extension kits available).
• Easy to specify (refer to the ordering information at the end of the section).
Performance
Security
uccessfully tested on a wide range of LPS 1175 Security Rating
S
2, 3, 4 and 5 doorsets
Fire
uccessfully tested on BS 476 part 22:1987 and EN 1634 part 1 doorsets
S
(Certifire accredited)
Blast
uccessfully blast tested on doorsets to meet the protection of the bomb
S
blast standard for ‘Protected Spaces’; ratings ‘C15’ and ‘C25’
Ballistics
uccessfully tested on doorsets to BS EN 1522:1999 FB1-FB7
S
inclusive and FSG
Panic Exit
Independently type tested to BS EN 1125: 2008, CE marked
Emergency Exit Independently type tested to BS EN 179: 2008, CE marked
Slimline
Safe Exits
Slimline: Panic and
Emergency exits
High performance, safe exit devices
Slimline bolting devices are:
• Strong
• Simple to specify
• Non-handed* and bi-directional
• Tested to over one million cycles
• Attractively finished
Slimline bolting only devices have:
• Automatic bolting upon door closure
• Proven rack and pinion mechanism
• Hardened steel bolts
• Choice of exit methods
• A
vailable in stainless steel 316 for
hostile environments
* Some enhancements require handing to be specified, refer to ‘Enhancement Guide’.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
P1
01.13
Slimline
Safe Exits
P2
01.13
Modular system
The Slimline range has been designed with a common fixing footprint, enabling alternative modules to be
retrofitted to meet changes of customer requirements.
Performance
Security successfully tested on a wide range of LPS 1175 Security Rating 2, 3, 4 and 5 doorsets
Blast s uccessfully blast tested on doorsets to meet the protection of the bomb blast standard for
‘Protected Spaces’; ratings ‘C15’ and 'C25’
Ballistics successfully tested on doorsets to BS EN 1522:1999
Fire successfully tested on BS 476 part 22:1987 and EN 1634 doorsets
Panic Exit independently type tested to BS EN 1125: 2008, CE marked
Emergency Exit independently type tested to BS EN 179: 2008, CE marked
Operation
Slimline safe exits provide auto-bolting upon door
closure, with a choice of lever handle or push pad
emergency exit, or panic bar when required to
comply with buildings used by general public
(refer to the Self-coding system guide to select
the correct operation).
Slimline Features
• 15mm bolts each with 25mm throw
• Positive engagement
87.2
36
198.0
25 THROW
87.2
Slimline devises are supplied as standard for
surface fitting, ensuring the fabric strength of
the door is maintained. Concealed fixing packs
are available for mortice fitting to steel, timber
and composite doors.
2.5mm PACKING PLATE
15
Fitting
93.5
41
52
10.5
88
22
Slimline SL305 emergency exit centre module
dimensions (mm), shown with push pad option H3
• Easily adjusted
• S
teel template provides accurate installation and acts as a drilling
template for fixings, handle and cylinder positions
• Suitable for door heights up to 2200 mm, extensions available for higher doors
Slimline Benefits
• High performance
• Modular design
• Reliable, offering long trouble free life
• Choice of entry and exit methods
• Upgrade solution for existing doors
Steel template
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Safe Exits
P3
01.13
Self-coding system
Slimline (SL) modular devices have a simple ordering code that covers the number of securing bolts,
the chosen methods of entry and exit, followed by additional enhancements to further customise the device.
Slimline devices are suitable for fitting to almost any door; left or right-hand hung, inward- or outward-opening.
The device is easy to specify:
Step 1.
Choose the number of bolts securing (2 or 3)
Step 2.
Apply entry code 0 (safe exit door)*
Step 3.
Choose the required exit code 4 (panic) or 5 (emergency)
Step 4.
Select any enhancements to customise and suit specific requirements
That’s it! The device is specified.
* Panic and emergency exit devices have a ‘0’ entry code. These can be supplied with an external lockable
handle, see enhancement code ‘L'.
Four steps to Slimline
Step 1
Step 2
Number of bolts
2
2-point securing
3
3-point securing
Entry
0
No entry provision
Step 3
Step 4
Exit
Enhancements
Enhancement example
4
Panic exit
5
Emergency exit
L1
External key entry
(recessed LEO)
M
Electric monitoring
of bolt status
W
Steel core fixing
Note: If key entry is required
on bolting-only devices refer
to ‘Enhancements’ code ‘L’
Example system code:
SL
3
0
4 - 05 - L1
M
W
In the above example, SL304 specifies a Slimline 3-point bolting device with panic bar exit method. The code
‘-05-’ indicates a left hand device.The enhancement codes specify external key entry LEO (L1), electric
monitoring of bolt status (M) and steel core fixing (W).
Slimline enhancements
Devices are normally supplied for surface mounting, with auto-bolting to resecure upon door closure.
The Slimline range is supported with a full range of enhancements enabling a device to be tailored to meet the
most demanding requirements.
Refer to the Slimline ‘Enhancement Guide’ for full information on available enhancements, together with any
handing variants.
A selection of frame and floor keeps is available to suit most applications, refer to ‘Slimline Keeps and Strikes’
for full details.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Safe Exits
P4
01.13
Bi-directional restraint
UK patent application number 0504198.3
• Unique restraint suitable for both inward- and outward-opening doors
• Non-handed, suitable for both right- and left-hand hung doors
• Easy adjustment for positive engagement
Outward opening
Inward opening
Slimline Handing
Slimline is generally not handed but certain enhancements are.
The Slimline enhancements list and the handing chart (on the right)
provides handing information where required.
Popular Enhancements
The following is a summary of the more popular enhancements chosen for Slimline safe exit devices; refer to the
full enhancement chart for the wider choice and full details.
CODEDESCRIPTION
En
Height increment above 2200mm; (n) = number of 1000mm increments
H
Free access, non-lockable external handle addition, when security is not an issue (i.e. a fire door)
H3
Push pad; in place of inside handle
L
External key and lever handle entry (LEO - Lock with Emergency Override),
for appropriate levels of attack resistance
M
Electric monitoring of bolt status
On
hoice of alternative cylinder make (Union 5 pin fitted as standard),
C
including registered and customers own supply
S
Stainless Steel 316 - finish polished
Tn
Slave unit, provides 90° rotation of a vertical bolt
Un
Slave unit, provides 90° rotation and continuation of a vertical bolt
Wn
Choice of fixings to suit a range of door constructions and level of attack resistance
n
Slimline Operational Specific brochures and Wallcharts are available upon request.
Quality statement
Our continued commitment to product excellence and accreditation to ISO 9001:2000 throughout the group
ensures unequalled customer satisfaction and is our ‘Seal of Excellence’.
Intellectual Property Rights
All Surelock products are the subject of intellectual property rights. These rights include patent and design
rights, in particular UK patents 2289084, 2307270, 2321277, 2323272, 2330375, 2346927, 2351542, 2355282,
2359111, 2361959, 2364740, 2413822, 2423787, 2425325, 2462229 & 2462387, plus UK patent applications
2445948 & 2458893 together with overseas patents and applications.
In accordance with our policy of continual development and improvement we reserve the right to make changes
in design and specifications without notice.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Safe Exits
P5
01.13
‘Slimline’ 3-Point Bolting Devices - Enhancements available
Entry/Exit Codes
CODE
04
05
✔
✔
✔
✔
✔
✔
✔
*A0
A
* 3
B(n)
E(n)
H
H
* 0
H3
H8
H11
H12
H14
K
K8
K14
L
L1
L2
L3
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
L4
✔
✔
L5
✔
✔
M
M7
N
O0
O1
O2
O3
O4
O5
O9
O10
O22
O91
S
T
T1
U
U1
V
V1
V2
W
W2
W3
W8
W9
Y
* 0
Z
Z
* 0
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Description
Manual bolting
Auto-bolting sliding door
Packing; (n) = number of 1mm increments
Height increment above 2,200mm; (n) = number of 1,000mm increments
External stainless steel lever handle addition (non lockable)
Handle(s) not included
Push pad; in place of inside handle
External pad-lockable handle with emergency override (padlock not supplied)
1m long panic bar
Red flat lever inside handle
St/St lever handle inside in lieu of green handle
Key retained in unlocked position
Automatic ratchet locking upon bolt retraction - internal key re-set facility
Manual lock-back facility, bolting only (internal Euro-profile cylinder)
LEO - external key-entry lock with internal emergency override - surface mounted
Recessed LEO (flush fitting) - tested to LPS 1175 rating 3 protection
Recessed LEO (flush fitting) with cylinder guard - tested to LPS 1175 rating 4 protection
LEO with Euro-profile cylinder - external key-entry lock with internal
emergency override - surface mounted
Recessed LEO (flush fitting) with Euro-profile cylinder - tested to LPS 1175 rating
3 protection
Recessed LEO (flush fitting) with Euro-profile cylinder and cylinder guard
- tested to LPS 1175 rating 4 protection
Electric monitoring of bolt status
Motorised bolt release
Electric monitoring of lock status
Cylinder - supplied free-issue (approved types and factory fitted only)
Cylinder - Kaba-20 (registered)
Cylinder - Assa Twin Combi 5800 (registered)
Cylinder - Yale
Cylinder - Bramah (registered)
Cylinder - Medeco m3-ARX (registered)
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
Cylinder - Kaba Quattro pluS (registered)
Cylinder - Assa Ruko Flexcore (choice for registration)
Cylinder - Abloy Protec (registered, diamond level)
Stainless steel 316 - finish polished
Slave unit, 90° below handle
Slave unit, 90° above handle
Slave unit, 90° and continue, below handle
Slave unit, 90° and continue, above handle
VIP (Visual Indicator Panel)
VIP (Visual Indicator Panel) with electric monitoring of indicator and isolation keyswitch
VIP (Visual Indicator Panel) with electric monitoring of indicator
Machine screws with steel dowels
Surface fixing by coach screws
Surface fixing by machine screws
Mortice fixing pack with guides - timber doors
Mortice fixing pack with guides - steel doors
Single leaf - non BS EN type device
Double doorset active leaf - BS EN type device
Double doorset active leaf and passive leaves - BS EN type device
✔ Available enhancements
Dependant on other enhancement(s)
*Options non-conformant with BS EN 179 and BS EN 1125 certification
Indicates handed item
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Safe Exits
‘Slimline’ 4-Point Bolting Device - Enhancements available
Entry/Exit Codes
CODE
SL405
H3
K
L
L1
L2
✔
L3
✔
L4
✔
L5
✔
M
N
O0
O1
O2
O3
O4
O5
O9
O10
O22
O91
W
W2
W3
✔
✔
✔
✔
✔
✔
Description
Push pad; in place of inside handle
Key retained in unlocked position
LEO - external key-entry lock with internal emergency override - surface mounted
Recessed LEO (flush fitting) - tested to LPS 1175 rating 3 protection
Recessed LEO (flush fitting) with cylinder guard
- tested to LPS 1175 rating 4 protection
LEO with Euro-profile cylinder - external key-entry lock
with internal emergency override - surface mounted
Recessed LEO (flush fitting) with Euro-profile cylinder
- tested to LPS 1175 rating 3 protection
Recessed LEO (flush fitting) with Euro-profile cylinder and cylinder guard
- tested to LPS 1175 rating 4 protection
Electric monitoring of bolt status
Electric monitoring of lock status
Cylinder - supplied free-issue (approved types and factory fitted only)
Cylinder - Kaba-20 (registered)
Cylinder - Assa Twin Combi 5800 (registered)
Cylinder - Yale
Cylinder - Bramah (registered)
Cylinder - Medeco m3-ARX (registered)
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
Cylinder - Kaba Quattro pluS (registered)
Cylinder - Assa Ruko Flexcore (choice for registration)
Cylinder - Abloy Protec (registered, diamond level)
Machine screws with steel dowels
Surface fixing by coach screws
Surface fixing by machine screws
✔ Available enhancements
Dependant on other enhancement(s)
Indicates handed item
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
P6
01.13
Slimline
Key Release
Slimline:
Key Release
High performance, key entry devices
Slimline locking devices are:
• Strong
• Simple to specify
• Non-handed* and bi-directional
• Tested to over one million cycles
• Attractively finished
Slimline key-driven deadlocks have:
• Automatic re-securing upon door closure
• Proven rack and pinion mechanism
• Hardened steel bolts
• Choice of exit methods
• Choice of cylinders from leading manufacturers
• Available in stainless steel 316 for hostile environments
* Some enhancements require handing to be specified, refer to ‘Enhancement Guide’.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
P1
01.13
Slimline
Key Release
P2
01.13
Modular system
Slimline has been designed with a common fixing footprint and key cylinder position,
enabling alternative modules to be retrofitted to meet changes of customer requirements.
Choice of cylinders*
Key cylinders can be selected from most leading manufacturers, or customers
own supply, enabling existing suiting requirements to be maintained.
Key cylinders from most
leading manufacturers
* 'Union' cylinders fitted as standard.
Performance
Slimline provides the renowned Surelock strength and stability required for high performance doors, including:
Security successfully tested on a wide range of LPS 1175 Security Rating 2, 3, 4 and 5 doorsets
Blast s uccessfully blast tested on doorsets to meet the protection of the bomb blast standard for
‘Protected Spaces’; ratings ‘C15’ and 'C25’
Ballistics successfully tested on doorsets to BS EN 1522:1999
Fire successfully tested on BS 476 part 22:1987 and EN 1634 doorsets
Panic Exit independently type tested to BS EN 1125: 2008, CE marked
Emergency Exit independently type tested to BS EN 179: 2008, CE marked
Operation
93.5
Key release devices, provide automatic re-securement upon
door closure with a wide choice of exit solutions including key
or turnknob lock release, panic or emergency exit (refer to the
Self-coding system guide to select the correct operation).
2.5mm PACKING PLATE
289
87.2
36
36
15
25 THROW
41
87.2
Supplied as standard for surface fitting, ensuring
the fabric strength of the door is maintained.
Concealed fixing packs are available for mortice
fitting to steel, timber and composite doors.
125
Fitting
Slimline Features
• 15mm bolts each with 25mm throw
52
11
88
22
• Positive engagement
• Easily adjusted
Slimline SL313 Key release centre module dimensions (mm)
• S
teel template provides accurate installation and acts as a drilling template for fixings,
handle and cylinder positions
• Suitable for door heights up to 2200 mm, extensions available for higher doors
Slimline Benefits
• High performance
• Modular design
• Reliable, offering long trouble free life
• Choice of entry and exit methods
• Upgrade solution for existing doors
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Steel template
Slimline
Key Release
P3
01.13
Self-coding system
Slimline (SL) modular devices have a simple ordering code that covers the number of securing bolts, the
chosen methods of entry and exit, followed by additional enhancements to further customise the device.
Slimline devices are suitable for fitting to almost any door; left or right-hand hung, inward- or outward-opening.
The device is easy to specify:
Step 1.
Choose the number of bolts securing (2 or 3)
Step 2.
Apply entry code 1 (key release)
Step 3.
Choose required exit code 0, 1, 3, 4 or 5
Step 4.
Select any enhancements to customise to suit any specific requirements
That’s it! The device is specified.
Four steps to Slimline
Step 1
Step 2
Step 3
Step 4
Number of bolts
Entry
Exit
Enhancements
Enhancement example
2
2-point securing
3
3-point securing
1
Key
and handle
entry
0
No exit provision
1
Key and handle
exit
N
Electric
monitoring
of lock status
2
Electric release
and handle exit
O5
Medeco m3-ARX
(registered cylinder)
3
Turnknob
release
and handle exit
P
Cylinder guard
4
Panic exit
W
Steel
core fixing
5
Emergency exit
Indicates handed item
Example system code:
SL
3
1
3 - 00 - N
O5
P
W
In the above example, SL313 specifies a Slimline 3-point device with external key entry, turnknob exit release
with lever handle both sides. The enhancement codes specify electric monitoring of lock status (N),
Medeco m3-ARX cylinder (O5), cylinder guard (P) and steel core fixing (W).
Note: T
he code “00” specifies no particular handing. A handing code is required for certain enhancements (refer to ‘Slimline Enhancements’).
Surelock Slimline enhancements
Slimline is supported with a full range of enhancements to tailor a device to meet the most demanding
requirements. Devices are normally supplied for surface mounting, with auto-bolting and auto-deadlocking.
Union 5-pin (non-registered) cylinders are supplied as standard on key-driven locks. Refer to the Slimline
‘Enhancement Guide’ for further information, together with any handing variants.
A wide range of frame and floor keeps are available, refer to ‘Keeps and Strikes’ for full details.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Key Release
P4
01.13
Bi-directional restraint
UK patent application number 0504198.3
• Unique restraint suitable for both inward- and outward-opening doors
• Non-handed, suitable for both right- and left-hand hung doors
• Easy adjustment for positive engagement
Outward opening
Inward opening
Popular Enhancements
The following is a summary of the more popular enhancements chosen for Slimline safe exit devices; refer to the
full enhancement chart for the wider choice and full details.
CODEDESCRIPTION
A0
Manual bolting
En
Height increment above 2200mm; (n) = number of 1000mm increments
H3
Push pad; in place of inside handle
K0
Manual locking
K7
Lock back facility, bolts secured in thrown and retracted position
M
Electric monitoring of bolt status
N
Electric monitoring of lock status
On
hoice of alternative cylinder make (Union 5 pin fitted as standard),
C
including registered and customers own supply
Pn
Cylinder guard selection for appropriate levels of attack resistance
S
Stainless Steel 316 - finish polished
Tn
Slave unit, provides 90° rotation of a vertical bolt
Un
Slave unit, provides 90° rotation and continuation of a vertical bolt
Wn
Choice of fixings to suit a range of door constructions and level of attack resistance
Slimline Operational Specific brochures and Wallcharts are available upon request.
Quality statement
Our continued commitment to product excellence and accreditation to ISO 9001:2000 throughout the group
ensures unequalled customer satisfaction and is our ‘Seal of Excellence’.
Intellectual Property Rights
All Surelock products are the subject of intellectual property rights. These rights include patent and design
rights, in particular UK patents 2289084, 2307270, 2321277, 2323272, 2330375, 2346927, 2351542, 2355282,
2359111, 2361959, 2364740, 2413822, 2423787, 2425325, 2462229 & 2462387, plus UK patent applications
2445948 & 2458893 together with overseas patents and applications.
In accordance with our policy of continual development and improvement we reserve the right to make changes
in design and specifications without notice.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Key Release
P5
01.13
‘Slimline’ Key Release Deadlocks - Enhancements available
Entry/Exit Codes
CODE
A
= 0
A
= 3
B(n)
E(n)
H
= 0
H3
H9
H11
H14
K
K0
K4
K6
K7
K12
K15
M
M7
N
O0
O1
O2
O3
O4
O5
O9
O10
O22
O91
P
P4
P5
P6
S
T
T1
U
U1
W
W2
W3
W8
W9
Y
= 0
Z
Z
= 0
01
10
11
13
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
14* 15*
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Description
Manual bolting
Auto-bolting sliding doors
Packing; (n) = number of 1mm increments
Height increment above 2200mm; (n) = number of 1000mm increments
Handle(s) not included
Push pad; in place of inside handle
Handles not included; with 8mm follower
1m long panic bar
St/St lever handle inside in lieu of green handle
Key retained in unlocked position
Manual locking
Break-dome over turnknob
Lockable in the retracted position only (function according to system type)
Lockable in thrown and retracted position (function according to system type)
Euro-profile cylinder in place of rim-latch style cylinder
Shrouded turnknob
Electric monitoring of bolt status
Motorised bolt release (only available with option A0)
Electric monitoring of lock status
Cylinder - supplied free‑issue (approved types and factory fitted only)
Cylinder - Kaba-20 (registered)
Cylinder - Assa Twin Combi 5800 (registered)
Cylinder - Yale
Cylinder - Bramah (registered)
Cylinder - Medeco m3-ARX (registered)
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
Cylinder - Kaba Quattro pluS (registered)
Cylinder - Assa Ruko Flexcore (choice for registration)
Cylinder - Abloy Protec (registered, diamond level)
Cylinder guard for door thickness 44-60mm - tested to LPS1175 Rating 3 protection
Cylinder guard to take Euro-profile cylinder - tested to LPS1175 Rating 3 protection
Cylinder guard for door thickness 44-60mm - tested to LPS1175 Rating 4 protection
Cylinder guard for door thickness 44-60mm - tested to LPS1175 Rating 5 protection
Stainless steel 316 - finish polished
Slave unit, 90° below handle
Slave unit, 90° above handle
Slave unit, 90° and continue, below handle
Slave unit, 90° and continue, above handle
Machine screws with steel dowels
Surface fixing by coach screws
Surface fixing by machine screws
Mortice fixing pack with guides - timber doors
Mortice fixing pack with guides - steel doors
Single leaf - non BS EN type device
Double doorset active leaf - BS EN type device
Double doorset active leaf and passive leaves - non BS EN type device
4 Available enhancements
Dependant on other enhancement(s)
= Options non-conformant with BS EN 179 and BS EN 1125 certification
* Indicates handed item
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Electric Release
Slimline: Electric Release
High performance, access control entry devices
Slimline locking devices are:
• Strong
• Simple to specify
• Non-handed* and bi-directional
• Tested to over one million cycles
• Attractively finished
Slimline electric release deadlocks have:
• Automatic re-securing upon door closure
• Proven rack and pinion mechanism
• Hardened steel bolts
• Choice of exit methods
• Available in stainless steel 316 for hostile environments
* Some enhancements require handing to be specified, refer to ‘Enhancement Guide’.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
P1
01.13
Slimline
Electric Release
P2
01.13
Modular system
Slimline has been designed with a common fixing footprint and key cylinder position, enabling alternative
modules to be retrofitted to meet changes of customer requirements.
External key override in case of power failure
An external key override can be provided to cover for the possibility of power failure, with cylinders from most
leading manufacturers, or customers own supply, enabling existing suiting requirements to be maintained.
Performance
Slimline provides the renowned Surelock strength and stability required for high performance
doors, including:
Security successfully tested on a wide range of LPS 1175 Security Rating 2, 3, 4 and 5 doorsets
Blast s uccessfully blast tested on doorsets to meet the protection of the bomb blast standard for
‘Protected Spaces’; ratings ‘C15’ and 'C25’
Ballistics successfully tested on doorsets to BS EN 1522:1999
Fire successfully tested on BS 476 part 22:1987 and EN 1634 doorsets
Panic Exit independently type tested to BS EN 1125: 2008, CE marked
Emergency Exit independently type tested to BS EN 179: 2008, CE marked
Operation
93.5
Electric release devices, provide automatic re-securement
upon door closure with a wide choice of exit solutions including
access control or turnknob lock release, panic or emergency exit
(refer to the Self-coding system guide to select the correct operation).
2.5mm PACKING PLATE
41
289
87.2
25 THROW
36
36
15
Supplied as standard for surface fitting, ensuring the fabric strength
of the door is maintained. Concealed fixing packs are available for
mortice fitting to steel, timber and composite doors.
87.2
Fitting
Slimline Features
• 15mm bolts each with 25mm throw
• Positive engagement
• Easily adjusted
• S
teel template provides accurate installation and acts as
a drilling template for fixings, handle and cylinder positions
52
11
88
22
Slimline SL322 electric release centre module
dimensions (mm)
• Suitable for door heights up to 2200 mm, extensions available for higher doors
Slimline Benefits
• High performance
• Modular design
• Reliable, offering long trouble free life
• Choice of entry and exit methods
• Upgrade solution for existing doors
Steel template
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Electric Release
01.13
P3
Self-coding system
Slimline (SL) modular devices have a simple ordering code that covers the number of securing bolts,
the chosen methods of entry and exit, followed by additional enhancements to further customise the device.
Slimline devices are suitable for fitting to almost any door; left or right-hand hung, inward- or outward-opening.
The device is easy to specify:
Step 1.
Choose the number of bolts securing (2 or 3)
Step 2.
Apply entry code 2 (electric release)
Step 3.
Choose required exit code 0, 2, 3, 4 or 5
Step 4.
Select any enhancements to customise to suit any specific requirements
That’s it! The device is specified.
Four steps to Slimline
Step 1
Step 2
Number of bolts
2
2-point securing
3
3-point securing
Entry
2
Electric release
and handle entry
0
Step 3
Step 4
Exit
Enhancements
Enhancement example
No exit provision
1
Key and handle exit
2
Electric release and
handle exit
3
Turnknob
release
and handle exit
4
Panic exit
5
Emergency exit
K2
External key release
in case of power
failure
O5 M
edeco m3-ARX
registered cylinder
P5 Cylinder guard
W Steel core fixing
Indicates handed item
Example system code:
SL
3
2
5 - 04 - K2
O5
P5
W
In the above example, SL325 specifies a Slimline 3-point device external electric lock release with lever handle
and a lever handle emergency exit from the inside. The enhancement codes specify external key release in case
of power failure (K2), Medeco m3-ARX cylinder (O5), cylinder guard (P5) and steel core fixing (W).
Note: The handing code “04” specifies right hand as the ergonomically designed emergency handle, exit code ‘5’ is a handed item.
Power consumption
Slimline standard solenoids are 12V energise to unlock (fail secure)
with alternative 24V and 50V, plus energise to lock (fail safe), all available.
Refer to the Slimline ‘Enhancement Guide’ for full information.
Voltage
(dc)
Surelock Slimline enhancements
Power
consumption
Current
draw
V
W
A
12
6.3
0.53
24
6.3
0.26
50
6.3
0.13
Slimline is supported with a full range of enhancements to tailor a device to meet the most demanding
requirements. Devices are normally supplied for surface mounting, with auto-bolting and auto-deadlocking.
Refer to the Slimline Enhancement Guide for further information, together with any handing variants.
A wide range of frame and floor keeps are available, refer to ‘Keeps and Strikes’ for full details.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Electric Release
P4
01.13
Bi-directional restraint
UK patent application number 0504198.3
• Unique restraint suitable for both inward- and outward-opening doors
• Non-handed, suitable for both right- and left-hand hung doors
• Easy adjustment for positive engagement
Outward opening
Inward opening
Popular Enhancements
The following is a summary of the more popular enhancements chosen for Slimline electric release devices;
refer to the full enhancement chart for the wider choice and full details.
CODEDESCRIPTION
En
Height increment above 2200mm; (n) = number of 1000mm increments
A0
Manual bolting
H3
Push pad; in place of inside handle
K Manual locking
K7
Lock back facility, bolts secured in thrown and retracted position
M
Electric monitoring of bolt status
N
Electric monitoring of locking status
On
hoice of alternative cylinder make (Union 5 pin fitted as standard),
C
including registered and customers own supply
Pn
Cylinder guard selection for appropriate levels of attack resistance
Rn
Alternative 24V and 50V solenoids (12V as standard), plus fail safe/secure options
S
Stainless Steel 316 - finish polished
Tn
Slave unit, provides 90° rotation of a vertical bolt
Un
Slave unit, provides 90° rotation and continuation of a vertical bolt
Wn
Choice of fixings to suit a range of door constructions and level of attack resistance
0
Slimline Operational Specific brochures and Wallcharts are available upon request.
Quality statement
Our continued commitment to product excellence and accreditation to ISO 9001:2000 throughout the group
ensures unequalled customer satisfaction and is our ‘Seal of Excellence’.
Intellectual Property Rights
All Surelock products are the subject of intellectual property rights. These rights include patent and design
rights, in particular UK patents 2289084, 2307270, 2321277, 2323272, 2330375, 2346927, 2351542, 2355282,
2359111, 2361959, 2364740, 2413822, 2423787, 2425325, 2462229 & 2462387, plus UK patent applications
2445948 & 2458893 together with overseas patents and applications.
In accordance with our policy of continual development and improvement we reserve the right to make changes
in design and specifications without notice.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Electric Release
P5
01.13
‘Slimline’ Electric Release Deadlocks - Enhancements available
Entry/Exit Codes
CODE
A
✝ 3
B(n)
E(n)
H
✝ 0
H3
H9
H11
H12
H14
K2
K4
K12
K15
M
M7
N
O0
O1
O2
O3
O4
O5
O9
O10
O22
O91
P
P4
P5
R1
R2
R3
R4
R7
S
T
T1
U
U1
W
W2
W3
W8
W9
Y
✝ 0
Z
Z
✝ 0
20
21
22
23
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
24* 25*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Description
Auto-bolting sliding doors
Packing; (n) = number of 1mm increments
Height increment above 2200mm; (n) = number of 1000mm increments
Handle(s) not included
Push pad; in place of inside handle
Handles not included; with 8mm follower
1m long panic bar
Red flat lever inside handle
St/St lever handle inside in lieu of green handle
External key release in case of power failure
Break-dome over turnknob
Euro-profile cylinder in place of rim-latch style cylinder
Shrouded turnknob
Electric monitoring of bolt status
Motorised bolt release
Electric monitoring of lock status
Cylinder - supplied free-issue (approved types and factory fitted only)
Cylinder - Kaba-20 (registered)
Cylinder - Assa Twin Combi 5800 (registered)
Cylinder - Yale
Cylinder - Bramah (registered)
Cylinder - Medeco m3-ARX (registered)
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
Cylinder - Kaba Quattro pluS (registered)
Cylinder - Assa Ruko Flexcore (choice for registration)
Cylinder - Abloy Protec (registered, diamond level)
Cylinder guard for door thickness 44-60mm - tested to LPS1175 Rating 3 protection
Cylinder guard to take Euro-profile cylinder - tested to LPS1175 Rating 3 protection
Cylinder guard for door thickness 44-60mm - tested to LPS1175 Rating 4 protection
Access control (energise to unlock) 24V solenoid
Access control (energise to lock)12V solenoid
Access control (energise to lock) 24V solenoid
Access control (energise to unlock) 50V solenoid
Access control (energise to lock) 50V solenoid
Stainless steel 316 - finish polished
Slave unit, 90° below handle
Slave unit, 90° above handle
Slave unit, 90° and continue, below handle
Slave unit, 90° and continue, above handle
Machine screws with steel dowels
Surface fixing by coach screws
Surface fixing by machine screws
Mortice fixing pack with guides - timber doors
Mortice fixing pack with guides - steel doors
Single leaf - non BS EN type device
Double doorset active leaf - BS EN type device
Double doorset active leaf and passive leaves - non BS EN type device
✔ Available enhancements
Dependant on other enhancement(s)
✝ Options non-conformant with BS EN 179 and BS EN 1125 certification
*
Indicates handed item
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Combination Lock Entry
Slimline: Combination
Lock Entry
High performance, controlled entry
Slimline combination lock devices are:
• Strong
• Simple to specify
• Bi-directional
• Tested to over one million cycles
• Attractively finished
Slimline combination release deadlocks have:
• Proven rack and pinion mechanism
• Hardened steel bolts
• Choice of combination locks from leading manufacturers
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
P1
01.13
Slimline
Combination Lock Entry
P2
01.13
Modular System
Slimline has been designed with a common fixing footprint and lock position, enabling alternative modules to be
retrofitted to meet changes of customer requirements.
Performance
Slimline provides the renowned Surelock strength and stability required for high performance doors, including:
Security successfully tested on a wide range of LPS 1175 Security Rating 2, 3, 4 and 5 doorsets
Blast s uccessfully blast tested on doorsets to meet the protection of the bomb blast standard for
‘Protected Spaces’; ratings ‘C15’ and 'C25’
Ballistics successfully tested on doorsets to BS EN 1522:1999
Fire successfully tested on BS 476 part 22:1987 and EN 1634 doorsets
Panic Exit independently type tested to BS EN 1125: 2008, CE marked
Emergency Exit independently type tested to BS EN 179: 2008, CE marked
Operation
Combination lock release devices provide a choice from leading manufacturers of mechanical and electronic
combination lock entry, with automatic bolting upon door closure (refer to the Self-coding system guide to
select the correct operation).
Fitting
Supplied as standard for surface fitting, ensuring the fabric strength of the door is maintained for fitting to steel,
timber and composite doors.
Slimline Features
• 15mm bolts each with 25mm throw
• Positive engagement
• Easily adjusted
• S
teel template provides accurate installation
and acts as a drilling template for fixings,
handle and cylinder positions
• S
uitable for door heights up to 2200 mm,
extensions available for higher doors
Slimline Benefits
• High performance
• Modular design
• Reliable, offering long trouble free life
• C
hoice of entry locks from leading
manufacturers
• Upgrade solution for existing doors
Slimline ‘SL335’ combination lock release
centre module dimensions (mm)
L/H shown.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Combination Lock Entry
P3
01.13
Self-coding system
Slimline (SL) modular devices have a simple ordering code that covers the number of securing bolts, the
chosen methods of entry and exit, followed by additional enhancements to further customise the device.
Slimline devices are suitable for fitting to almost any door; inward- or outward-opening.
The device is easy to specify:
Step 1. Choose the number of bolts securing (2 or 3)
Step 2. Apply entry code 3 (combination lock release)
Step 3. Choose required exit code
Step 4. Select any enhancements to customise to suit any specific requirements
That’s it! The device is specified.
Four steps to Slimline
Step 1
Step 2
Number of bolts
Entry
2
2-point securing
3
3-point securing
Combination lock
release and handle entry
3
Step 3
Step 4
Exit
Enhancements
Enhancement example
4
Panic exit
5
Emergency exit
W
Steel core fixing
Indicates handed item
Example system code:
SL
3
3
5 - 04 - W
In the above example, SL335 specifies a Slimline 3-point device, external combination lock release with lever
handle and a lever handle emergency exit from the inside. The enhancement code ‘W’ specifies steel core fixing.
Note: The handing code “04” specifies right hand as the combination lock release are handed devices.
Surelock Slimline enhancements
Slimline is supported with a full range of enhancements to tailor a device to meet the most demanding
requirements: Devices are normally supplied for surface mounting. Refer to the Slimline ‘Enhancement Guide’
for further information.
A wide range of frame and floor keeps are available, refer to ‘Keeps and
Strikes’ for full details.
Bi-directional restraint
UK patent application number 0504198.3
• Unique restraint suitable for both inward and outward opening doors
• Easy adjustment for positive engagement
Outward opening
Inward opening
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Combination Lock Entry
P4
01.13
Slimline handing
Combination lock entry devices are handed. Our handing chart
(on the right) shows the codes we use to indicate door handing
and opening direction.
Popular enhancements
The following is a summary of the more popular enhancements chosen for Slimline combination lock release
devices; refer to the full enhancement chart for the wider choice and full details.
CODEDESCRIPTION
En
Height increment above 2200mm; (n) = number of 1000mm increments
H3
Push pad; in place of inside handle
Kn
Choice of alternative mechanical and electronic combination lock (S&G 8550 combination lock as standard)
K2
External key override of ‘lock-in’ facility (safe access)
K7
Lock back facility addition, bolts secured in thrown and retracted position
K9
Internal ‘lock-in’ facility; turnknob activated
M
Electric monitoring of bolt status
Tn
Slave unit, provides 90° rotation of a vertical bolt
Un
Slave unit, provides 90° rotation and continuation of a vertical bolt
Wn
Choice of fixings to suit a range of door constructions and level of attack resistance
Slimline ‘Operational Specific’ brochures and ‘Wallcharts’ are available upon request.
Quality statement
Our continued commitment to product excellence and accreditation to ISO 9001:2000 throughout the group
ensures unequalled customer satisfaction and is our ‘Seal of Excellence’.
Intellectual Property Rights
All Surelock products are the subject of intellectual property rights. These rights include patent and design
rights, in particular UK patents 2289084, 2307270, 2321277, 2323272, 2330375, 2346927, 2351542, 2355282,
2359111, 2361959, 2364740, 2413822, 2423787, 2425325, 2439327, 2445948, 2462229, 2462387 & 2458893
together with overseas patents and further applications.
In accordance with our policy of continual development and improvement we reserve the right to make changes
in design and specifications without notice.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Combination Lock Entry
‘Slimline’ Combination Deadlocks - Enhancements available
Entry/Exit Codes
CODE
30*
35*
Description
B(n)
✔
✔
Packing; (n) = number of 1mm increments
E(n)
✔
✔
Height increment above 2,200mm; (n) = number of 1,000mm increments
✔
Push pad; in place of inside handle
H
3
17
K
✔
✔
Kaba Mas Auditcon 552 electronic lock
K22
✔
✔
S&G 2740 electro-mechanical lock
M
✔
✔
Electric monitoring of bolt status
S
✔
✔
Stainless steel 316 - finish polished
T
✔
✔
Slave unit, 90° below handle
T1
✔
✔
Slave unit, 90° above handle
U
✔
✔
Slave unit, 90° and continue, below handle
U
1
✔
✔
Slave unit, 90° and continue, above handle
W
✔
✔
Machine screws with steel dowels
W2
✔
✔
Surface fixing by coach screws
W
✔
✔
Surface fixing by machine screws
✝ Y
0
✔
Single leaf - non BS EN type device
Z
✔
Double doorset active leaf - BS EN type device
✝ Z0
✔
Double doorset active and passive leaves - non BS EN type device
3
✔ Available enhancements
✝ Options non-conformant with BS EN 179 and BS EN 1125 certification
*
Indicates handed item
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
P5
01.13
Slimline
Enhancements
01.13
P1
Slimline:
Enhancements
Enhancements have been designed and tested to enable a basic Slimline device to be closely tailored to meet
customer’s individual requirements, to ensure the performance of a building and those who use the building.
Correct selection will ensure that a door will return to a specific status upon closure and if required linked to other
doors to create an ‘Air-lock’ application.
Each type of enhancement has been allocated an alpha code with numeric variants for each as applicable.
The following section describes each in as much detail as possible and where necessary technical information
has been included to assist in making the correct choice.
A wall chart is available listing all enhancements available for each device.
CODEDESCRIPTION
PAGE
A
Manual/Auto-bolting
2
B
Packing
2
E
Height increments
2
H
Handle variants
3
K
Operational variants
4-5
L
External key/handle entry lock (LEO) for ‘Safe exit’ bolting devices
6-8
M
Electric monitoring of bolt status
9
N
Electric monitoring of lock status
10
O
Key cylinder variants from most leading manufacturers, including customer’s own supply
11-12
P
Cylinder protection, various levels of testing included
13-14
R
Solenoid voltage and power to lock/unlock (fail safe/secure status)
15
S
Stainless steel 316 - finish polished
15
T
Slave unit, 90° turn of the bolt
16
U
Slave unit, 90° turn of the bolt and continue
16
V
Visual indicator panel
17
W
Various fixing screw packs to suit door construction
Y
Non BS EN device reference
Z
Double door leaf - BS EN device reference
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
18-19
20
20-21
Slimline
Option A(n)
Enhancements
P2
01.13
Manual/Auto-bolting
Standard Slimline devices provide automatic bolting upon door closure together with a
patented bi-directional restraint mechanism, suitable for both inward-and outward-opening
hinged doors. Enhancement A(n) provides alternatives to this.
Option A0
Manual bolting
Auto-bolting not provided. Manual operation required both to throw and retract bolts.
Note: Non compliant for CE marked panic and emergency exits
Option A3
Auto-bolting for sliding doors
Top guide and restraint supplied to suit a sliding door application.
Top guide, restraint and keep
for sliding doors - Option A3
Option B(n)
Packing
dditional packing under the device, (n) represents the thickness of packing (mm). Bolts are
A
already 5mm from the face of the door.
Height Extensions
Option E(n)
For doors above 2200mm tall; (n) represents the number of 1000mm increments, each
increment includes an additional guide bracket.
Example: E1 is suitable for doors up to 3200mm high
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P3
01.13
Handle Varients
Various handle combinations can be selected from those normally supplied for each device.
Option H
External lever handle
Stainless steel external handle added to ‘Exit’ only devices; provides free access where security
is not an issue (i.e. a fire wall partition door).
Option H0
Handle(s) not included, with standard 9.5mm follower
Enables architectural designed handles with 9.5mm square shaft to be selected, non-compliant
to BS EN 179: 2008 emergency exit accreditation and no CE marking.
NB: Check with technical department regarding suitable handle requirements.
Option H3
Push pad in place of inside handle
Alternative exit operator retains the BS EN 179: 2008 accreditation and CE marking.
191
137
Option H(n)
2.5
60
19
119
Option H9
Handle(s) not included, with standard 8mm follower
Enables architectural designed handles with 8mm square shaft to be selected, non-compliant
to BS EN 179: 2008 emergency exit accreditation and no CE marking.
NB: Check with technical department regarding suitable handle requirements.
Option H11
1m bar
For wider doors when a 1000mm panic bar is preferred to the standard 800mm length bar.
Note: Doors wider than 1300mm are outside the scope of BS EN 1125: 2008.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P4
01.13
Option K(n)
Operational Varients
Various locking combinations can be selected from those normally supplied for each device.
Option K
Key retained in unlocked position
The key is held retained after unlocking until it is re-secured, ensuring the device is always
locked following key withdrawal. This provides a forced securing function when the key is
attached to the user.
Manual locking
Option K0
Removes the auto-deadlocking feature (supplied as standard), for applications when a door is
needed to remain unlocked, i.e. to provide free access in a ‘day-time’ mode.
Option K2
External key release in case of power failure
Provides a key entry facility for electric release devices in the event of power failure.
Option K4
Break-dome over turnknob
Provides a manual lock release
facility with visual awareness of
an event, i.e. for use on controlled
exits, or in the case of power failure
for electric release devices.
50
Break-dome over
turnknob - Option K4
Option K6
Lockable in the retracted position only
Enables the bolts to be secured in the retracted position.
Option K7
Lockable in the thrown and retracted position
Enables the bolts to be secured in the thrown and retracted position.
Option K8
Automatic ratchet locking upon bolt retraction, with breach awareness
A ratchet mechanism secures the bolts when retracted. A key re-set facility is provided.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P5
01.13
Option K12
Euro-profile cylinder in place of rim-latch style cylinder
To be selected when device is to be fitted in a concealed mortice application.
Note: Euro-profile cylinders are standard with options W8 and W9 (mortice fitting devices), where applicable.
125
. Euro-profile cylinder Option K12
Option K14
Manual lock-back facility, bolting only (internal Euro-profile cylinder)
Enables the bolts of a bolting only device to be secured in their retracted position by internal
key operation only, i.e. day-time non auto-bolting application.
20.5
74.5
161
Shrouded turnknob Option K15
62
Kaba Mas Auditcon 552 electronic lock
Option K17
Combination lock alternative - an electronic combination lock in place of the standard Manifoil
combination lock.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
258
Option K15
Shrouded turnknob
A shield over the turnknob to help prevent external manipulation.
Slimline
Enhancements
01.13
P6
Option L(n)
LEO - Lock with Emergency Override
A choice of external key lockable lever handles provides entry for ‘Safe Exit’ devices.
Almost all key cylinder manufacturers can be accommodated to suit a customer’s preference
and/or special suiting requirement (Union fitted as standard). Cylinder guards have been tested
to meet the demanding security requirements of LPS 1175 Security Ratings 2, 3 & 4.
LPS 1175
Surelock
65
Fitted with a screw-in type cylinder.
Option L1
LEO - recess fitting
123
Face fitted to the external face of the door with
fixing bolts passing right through the core of the
door in a sandwich construction.
26.5
35
LPS 1175
Surelock
SR 3
Base
180
LEO - surface fitting
9.4
32
65
The body of the LEO is recessed into the external
face of the door with fixing bolts passing right
through the core of the door in a sandwich
construction.
32
54
22.5
6
Ø28
168
190
123
Option L
28
Fitted with a screw-in type cylinder.
M8 FIXING SCREWS
LEO - recess fitting
LPS 1175
Surelock
SR 4
Enhanced
As L1 but armoured with a manganese cylinder
guard and anti-drilling disk.
65
32
54
22.5
6
28
Ø28
168
123
Fitted with a screw-in type cylinder.
190
Option L2
M8 FIXING SCREWS
LEO Options L
LEO Option L1
LEO Option L2
Indicates handed item
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
LPS 1175
Surelock
65
Fitted with a Euro-profile cylinder permitting
on-site cylinder changing.
LPS 1175
Surelock
SR 3
Base
123
ace fitted to the external face of the door with fixing
F
bolts passing right through the core of the door in a
sandwich construction.
Option L4 LEO - recess fitting
01.13
P7
26.5
180
Option L3 LEO - surface fitting
Enhancements
35
32
65
The body of the LEO is recessed into the external
face of the door with fixing bolts passing right through
the core of the door in a sandwich construction.
32
54
22.5
6
28
Ø28
168
123
190
Fitted with a Euro-profile cylinder permitting
on-site cylinder changing.
M8 FIXING SCREWS
Option L5 LEO - recess fitting
LPS 1175
Surelock
SR 4
Enhanced
65
As L4 but armoured with a manganese cylinder guard
and anti-drilling disk.
32
54
28
Ø28
M8 FIXING SCREWS
LEO Option L3
LEO Option L4
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
LEO Option L5
190
6
168
22.5
123
Fitted with a Euro-profile cylinder permitting
on-site cylinder changing.
Slimline
Option M
Enhancements
P8
01.13
Electric Monitoring of the Bolt Status
A double pole microswitch provides a signal when the bolt is thrown.
Option 'M' wiring diagram
N/C
BLUE
N/O
GREEN
C
RED
1
2
3
Note: Cable core colours may change if other electrical enhancements are fitted.
Option 'M3' wiring diagram
N/C
BLUE
1
Option M7
Motorised bolt release
Enables remote activation to drive the multiple bolts to their retracted position, the bolts are
initially held in their retracted position
N/Oby a timer
GREEN whilst door opening is being initiated, the bolts
2
are then held retracted by the top restraint mechanism whilst the door is
open and the motor returning to its parked position. The bolts automatically
C
RED
resecuring upon door closure.
3
upplied complete with a controller, with outputs for bolt and lock
S
Option
'N' wiring
diagram
status monitoring and a door
actuator.
The controller
requires mains
electrical input.
Typical applications:
• Disabled access
• Remote building activation
• Sterile entry areas
Technical Information:
• Voltage 24V DC
N/C
BLUE
N/O
GREEN
C
RED
1
2
3
M7 Motorised bolt
release, left hand
shown
Indicates handed item
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Option N
N/C
BLUE
N/O
GREEN
C
RED
1
Slimline
Enhancements
2
Electric Monitoring of the Lock Status
A double pole microswitch provides a signal when the lock is secure.
3
Option 'N' wiring diagram
N/C
BLUE
N/O
GREEN
C
RED
1
2
3
Note: Cable core colours may change if other electrical enhancements are fitted.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
P9
01.13
Slimline
Enhancements
P10
01.13
Option O(n)
Cylinder Variants
The Slimline range of devices are fitted with Union (5 pin) cylinders as standard but almost
any make of cylinder can be specified. This usually enables preferred cylinders and current
key suiting to be maintained. Registered cylinders are available to provide a higher level of
key control.
he following cylinder variants indicate the manufacturer, model, registering information and
T
security level of cylinder to the European BS EN 1303 and UL standards.
Option O0
Customers own supply
Where a customer chooses to issue cylinders to Surelock McGill, this must be supported with a
key for quality control inspection before despatch.
he make of cylinder must be advised when ordering to ensure correct configuration of
T
the device. Do this by following the option code O0 with the code for the cylinder that you
will provide. For example, code O0 O5 indicates that you are going to supply a Medeco m3-ARX
cylinder.
Option O1
Option O2
Option O3
Kaba 20
Assa Twin-Combi
Yale (5 pin)
Registered
BS EN 1303
UL
yes
6-2
Registered
BS EN 1303
UL
yes
6-2
437
Registered
BS EN 1303
UL
BS EN 1303
UL
Registered
BS EN 1303
UL
yes
6-2
437
no
Option O4
Bramah
Registered
yes
Option O5
Medeco m3-ARX
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Option O6
Ingersoll
Registered
Enhancements
P11
BS EN 1303
UL
Registered
BS EN 1303
UL
yes
6-2
Registered
BS EN 1303
yes
6-2
Registered
BS EN 1303
yes
3-0
Registered
BS EN 1303
yes
6-2
yes
Option O9
Option O10
Option O22
Option O91
Abloy Disklock Pro
Kaba Quattro S
Assa Ruko Flexcore
Abloy Protech
UL
UL
UL
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
01.13
Slimline
Rim cylinder guard
LPS 1175
Surelock
SR 3
Base
9
58
Stainless steel cylinder guard for conventional shape
rim style cylinders, complete with manganese anti-drill
protection, for door thickness 44-60mm.
Ø56
38
48
Option P
30
72
Euro-profile cylinder
guard
LPS 1175
Surelock
SR 3
Base
Stainless steel cylinder guard for Euro-profile cylinder
style cylinders, complete with manganese anti-drill
projections.
Ø50
3
Option P4
P12
01.13
Cylinder Guards
A range of cylinder guards are available to suit various makes and cylinder profiles, including
rim-latch, profile and screw-in cylinders. Cylinder guards have been tested to meet the
demanding security requirements of LPS 1175 Security Ratings 2, 3, 4 & 5.
5
Option P(n)
Enhancements
34
Ø53
Cylinder guards Option P
Cylinder guard Option P4
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Option P5
Rim cylinder guard
LPS 1175
Surelock
SR 4
Enhanced
Enhancements
01.13
P13
n56
Manganese steel cylinder guard for conventional
shape rim latch style cylinders, complete with
manganese anti-drill protection, for door thickness
44-60mm.
58
5
9
30
72
LPS 1175
Surelock
SR 5
High
Manganese steel cylinder guard for conventional
shape rim latch style cylinders, complete with cobalt
anti-drill protection, for door thickness 52-60mm.
9
36.5
Cylinder guard Option P5
Ø12
42
Ø56
5
58
Rim cylinder guard
38
48
Option P6
30
72
Cylinder guard Option P6
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Option R(n)
P14
01.13
Solenoid Variants
A selection of continuous rated dc. solenoids with various voltages and operational features.
The default standard is 12V, energise to lock (fail secure in the case of power failure) with 6.3W
power consumption and 0.53A current draw.
Voltage
Energise to:
Power
Current draw
consumption
Option R1
24V
Unlock - fail secure
6.3W
0.26A
Option R2
12V
Lock - fail safe
6.3W
0.53A
Option R3
24V
Lock - fail safe
6.3W
0.26A
Option R4
50V
Unlock - fail secure
6.3W
0.13A
Option R7
50V
Lock - fail safe
6.3W
0.13A
Option S
Enhancements
Stainless Steel
Corrosion resistant stainless steel 316 with a polished finish. Ideal for offshore, saline and other
hostile situations as well as medical clean rooms.
Example of stainless steel Option S
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P15
01.13
90° change of bolt direction above handle
A slave unit that provides a 90° change in direction to secure the lower bolt into the door frame.
Typically used where the head is not suitable for a top vertical bolt.
Option U
90° change of bolt direction and continue below handle
A slave unit that provides an additional 90° lower horizontal bolt securing into the door frame.
It is typically used to provide additional strength on inward opening doors where the frame
rebate does not aid resistance to attack.
Option U1
90° change of bolt direction and continue above handle
A slave unit which provides an additional 90° upper horizontal bolt securing into the door
frame. It is typically used on overheight doors, or to provide additional strength on inward
opening doors where the frame rebate does not aid resistance to attack.
104
Additional directions
and drives available
with slave units
23
23
38.4
111.6
150
Option T1
104
90° change of bolt direction below handle
A slave unit that provides a 90° change in direction to secure the lower bolt into the door frame.
Typically used where the floor is not suitable for a bottom vertical bolt.
150
Option T
93.5
90o Slave Option T & T1
93.5
90o Slave & continue Option U & U1
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P16
01.13
Option V(n)
VIP (Visual Indicator Panels)
A selection of visual indicator panels with a choice of electric monitoring and isolation features.
Each device re-secures automatically upon door closure.
Option V
VIP (Visual Indicator Panel) A red indicator flag is driven out when retracting the bolts. This provides a high visibility
indication of a door breach. The device re-secures automatically upon door closure. The
indicator is reset with a key.
Option V1
VIP (Visual Indicator Panel) with status monitoring & isolation
As V but with a microswitch monitoring the bolt retraction and an isolation keyswitch to provide
de-activation of the alarm for authorised use. Both key cylinders are keyed alike.
Option V2
VIP (Visual Indicator Panel) with status monitoring
As V but with a microswitch monitoring the bolt retraction.
138
102
34
78
206
35
405.5
VIP examples of Option V & V2
99
198
66
93.5
24.8
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Option W(n)
Enhancements
P17
01.13
Fixing Packs
A selection of fixing packs is available to suit mortice and surface fitting devices to both timber
and steel doors.
Option W Steel core - surface fixing to timber doors
T
he most secure way of fixing a surface fitted device
to a timber door. Steel dowels with threaded nuts
inserted into the core of the door, machine screws
pass through the device securing into the threaded
nuts, ensuring a strong secure fitting.
Coach screw - surface fixing to timber doors
Option W2 fast and simple way of fixing a surface fitted device
A
to a timber door.
Option W3 Machine screw - surface fixing to steel doors
fast and simple way of fixing a surface fitted device
A
to a steel door.
Security screw - surface fixing to timber doors
Option W5 Pin-Torx screws supplied to provide a tamper resistant
method of fixing a surface fitted device to a timber door.
Option W6 Security screw - surface fixing to steel doors
in-Torx screws supplied to provide a tamper resistant
P
method of fixing a surface fitted device to a steel door. Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P18
01.13
Option W8 Mortice fixing pack for timber doors
C
omprising of a set of door edge guides for fitting to a prepared timber door to support the
bolts as they pass out of the door. The centre module is mounted on the forend plate fitted to
the leading edge of the door and guiding the horizontal bolt.
Note: Euro-profile cylinders are supplied on concealed mortice devices where applicable.
Option W9 Mortice fixing pack for steel doors
C
omprising of a set of door edge guides for fitting to a prepared steel door to support the bolts
as they pass out of the door. The centre module is mounted on the forend plate fitted to the
leading edge of the door and guiding the horizontal bolt.
Note: Euro-profile cylinders are supplied on concealed mortice devices where applicable.
Concealed mortice fixing packs Option W8 & W9
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P19
01.13
Option Y0
Single leaf - non BS EN type device
Where the sprung bottom bolt of a bolting-only device is not required.
Option Y0
Option Z
Double doorset active leaf - BS EN type device
Identifier for a device that is for the active leaf of a BS EN accredited double doorset.
Such a device is supplied with three horizontal bolts that secure against the passive leaf.
Strike plates are included for the passive leaf.
Double doorset BS EN active
leaf device - Option Z
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Enhancements
P20
01.13
Option Z0
Double doorset active and passive leaves - non BS EN type device
Identifier for both the active and passive leaf of a non BS EN accredited double doorset.
Comprises interlinked panic bars for both active and passive leaves. Sprung bottom bolt not included.
Double doorset interlinks non BS EN device Option Z0
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Frame Keeps and Base Plates
01.13
P1
Slimline: Frame keeps and base
plates for surface-mounted
systems
A wide selection of keeps and strike plates are available to suit almost
every application. These need to be ordered separately.
Available in heavy-section steel with a grey-white RAL 9002 leatherette powder coating finish, or from polished
stainless steel (add suffix ‘-S’ to your ordering code). For steel core (dowel) fixing add suffix ‘-W’ to your
ordering code.
SA
Frame keep and base plate
Designed to receive the horizontal bolt
on an inward- or outward-opening door
hung in a steel frame.
25
73
3
5
20
M6 CLEAR
SA1
Extended frame keep and base plate
Designed to receive the horizontal bolt
on outward-opening double-leaf timber
or steel doors. The extended base plate
ensures that the fixing screws enter into
the solid section of the door and not the
narrow section formed by the rebate.
SA1 may also be used in place of the
standard SA where a secure fixing near
the edge of the frame is not possible.
73
3
16
Frame keep and base plate with striker
The striker releases the restraint
mechanism within the Slimline system,
allowing the bolts to fire automatically
into their respective keeps, thus giving
a ‘slam-shut’ facility.
5
25
73
M6 CLEAR
16
5
Used in conjunction with the Slimline
‘autobolting’ feature, the frame keep and
base plate with striker is designed for use
on narrow-section metal frames with an
outward-opening door.
25
3mm BASE PLATE
20
SA2
M6 CLEAR
25
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
20
Slimline
Frame Keeps and Base Plates
01.13
P2
Keep plates for morticed and surface-mounted systems
Available in heavy-section steel with a zinc-plated finish, or from polished stainless steel (add suffix 'S' to your ordering code). This range of keeps is primarily designed for use with morticed systems.
On timber frames the keeps can be recessed flush with the frame. On metal frames they can be fixed to
reinforce a thin section prior to frame installation.
Designed to be recessed into timber
frames with doors which have been fitted
with a morticed system. The snib protects
the frame from any accidental damage or
undue wear by the bolt.
No 10 screw
30
8.5
5
Keep plate without snib
Designed to reinforce metal frames with
doors which have been fitted with a
morticed system or with outward-opening
doors fitted with a surface mounted
system.
75
SB1
75
Keep plate with snib
25
SB
No 10 screw
30
Off-centre keep plate without snib
Designed to reinforce steel frames with
outward-opening doors that have been
fitted with a surface-mounted system.
This reduces the amount of packing
which may otherwise be necessary under
a system.
75
SB2
5
No 10 screw
4
5
30
Designed for the top vertical bolt of a
mortice fitted device hung in a timber
frame. Door thickness up to 50mm.
No 10 screw
30
10
5
Designed for the top vertical bolt of a
mortice fitted device hung in a timber
frame. Door thickness up to 60mm.
90
Keep plate with snib and strike button
25
SB6
90
Keep plate with snib and strike button
25
SB4
No 10 screw
30
13.6
5
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Slimline
Frame Keeps and Base Plates
P3
Outward-opening frame keeps for surface-mounted systems
Made from heavy-section steel with a grey-white RAL 9002 leatherette powder coating finish as standard,
or from polished stainless steel (add suffix -'S' to your ordering code).
SC
Outward-opening timber frame keep
Designed for use on timber frames with
an outward-opening door.
110
No 12 SCREWS
22
50
18
No 12 SCREWS
3
Designed for use with the ‘auto-bolting’
feature on an outward-opening door
hung in a timber frame. The striker
releases the restraint mechanism
allowing the bolts to fire into their keeps,
thus providing a ‘slam-shut’ facility.
25
Outward-opening timber frame keep
and strike
50
SC1
3
110
No 12 SCREWS
51
Designed for use with the ‘auto-bolting’
feature on an outward-opening door
hung in a steel frame. The striker releases
the restraint mechanism allowing
the bolts to fire into their keeps, thus
providing a ‘slam-shut’ facility. Can also
be used as an alternative on a timber
frame in place of SC1.
25
Outward-opening steel frame keep
and strike
5
SC2
110
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
01.13
Slimline
Frame Keeps and Base Plates
P4
01.13
Inward-opening frame keeps for surface mounted systems
Made from heavy-section steel with a grey-white RAL 9002 leatherette powder coating finish or from polished
stainless steel (add suffix -S to your ordering code), these keeps are suitable for surface-mounted systems on
inward-opening doors with timber frames.
SA
Frame keep and base plate
73
25
Designed to receive the horizontal bolt
on an inward- or outward-opening door
hung in a steel frame.
3
5
20
M6 CLEAR
SD
Inward opening timber frame keep
No 10
SCREWS
3
63
19
26
110
Designed for use with an inward-opening
door hung in a timber frame.
Floor keeps
Made from heavy-section stainless steel, this keep is suitable for morticed or surface-mounted systems and
inward- or outward-opening doors.
SF
n50
49
This keep is fitted with a sprung plunger
which returns to a flush-floor position,
reducing the amount of dust and grit often
associated with normal floor sockets.
6
Dust excluding floor socket
n28
SE
Easy cleaning floor socket
110
30
21
This keep enables dust and grit to be
easily swept clean.
Alternative receiving keeps are available for the lower vertical bolt, to suit various site conditions, and are illustrated below.
SA
SB
SB1
SB2
SC
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelock.co.uk
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
SD