EXIT HARDWARE
The safe choice in exiting. High performance, high traffic devices that provide egress
efficiency, freedom of movement and robust security.
VERSION: AUGUST-11
Uniclass
L418184
CI/SfB
(31.59)
An ASSA ABLOY Group brand
Xt7
EXIT HARDWARE
pART Of ThE whOlE SOlUTION
Integrated door control solutions...
it’s in our DNA
Abloy UK are the leading electric locking provider in the UK and Ireland and we are pleased to
welcome you to this catalogue of our products.
Exit hardware forms just part of our total service, with a wide range of products and
capabilities that integrate perfectly - like our molecular diagram below - to provide a complete
door security and functionality solution. There is a catalogue for every category below and you
can find our products online at www.abloy.co.uk.
Handing
The correct hand of a door can be selected
using this diagram. Standing inside the box
looking out, choose your door hand from 1 to
4, determined by the hinge side and if the door
opens inwards or outwards.
Phone +44 (0)1902 364500
www.abloy.co.uk
co
nt
ro
l
Ac
ce
ss
lo
ck
s
El
ec
tri
c
st
rik
es
El
ec
tri
c
lo
ck
in
g
us
tri
al
In
d
m
or
tic
e
an
d
s
er
nd
yli
c
or
Do
Do
lo
ck
or
s
op
er
at
or
s/
clo
Pa
se
dl
rs
oc
ks
To gain advice or expertise with planning, specification and implementation of any door
solution, call us on +44 (0)1902 364500.
Ri
m
2
EXIT HARDWARE
Freedom and control
Resilient, functional exit hardware
With effortless efficiency and functionality, our range of JPM
exit hardware provides the exacting design, construction and
options to meet the demands of major public, commercial,
insitutional and industrial buildings.
or three point locking. All products are resistant to corrosion (96
hour salt spray test) and mechanical products are designed to
meet EN1125 panic exit or EN179 emergency exit device
standards.
The range of exit hardware offered by Abloy UK is
manufactured by JPM France – one of the world’s leading
experts in the field.
All commonly used variations of mechanical panic and
emergency exit devices are available offering single, two point
Strike plates for both types of normal installation are included
with all products and additional strikes are available to suit
specialist door situations.
All JPM products carry a five year warranty.
Phone +44 (0)1902 364500
www.abloy.co.uk
3
89 SERIES pUSh bARS
EXIT HARDWARE
4
x
89 Series features
8901
push bar
• CE: Product has been successfully type
tested for conformity to EN1125:2008.
Regular audit testing is undertaken
Single point
panic latch
• Door brackets only 42mm wide
Escape at all times
• Low opening pressure
Tested to EN1125
• Automatic re-latching of bolts when
door closes
• Pivoting Pullman latches
• Horizontal bars and vertical rods can be
cut to suit door size:
• All 89 series panic bars are supplied
950mm total width as standard with
1250mm total width versions
available to special order
• 8902 and 8903 bars are supplied
suitable for door heights of up to
2352mm
• Cross follower on main case
• S91 extension accessory kit, on page
12, can extend upper vertical rods by
up to 865mm for tall doors
• Non-handed
Finish
• Double rebated doors (use 8901 and
8902)
Silver enamel (stainless steel and other
finishes to special order)
• Outside trim available (see page 12)
x
8902 push bar
Two point locking
• CE: Product has been successfully
type tested for conformity to
EN1125:2008.
Regular audit testing is
undertaken
Pullman latches
top and bottom
and covered rods
Escape at all times
Tested to EN1125
44
95
25
1120
max
42
42
24
100
100
235
20
210
190
235
42
42
210
900/1200
190
950/1250
900/1200
950/1250
24
67
Phone +44 (0)1902 364500
www.abloy.co.uk
832
24
2352
max
89 SERIES pUSh bARS
x
8903 push bar
Three point
locking
Pullman latches top
and bottom plus
side latch and
covered rods
• CE: Product has been successfully
type tested for conformity to
EN1125:2008.
Regular audit testing is
undertaken
EXIT HARDWARE
Features
x
• Suitable for door heights of up
to 2352mm
Europad
emergency
exit device
• CE: Product has been
successfully type tested for
conformity to EN179
classification 37511322B.
Regular audit testing is
undertaken.
Escape at all times
• Low opening pressure – <8kg
Tested to EN179
• 2 point automatic relatching
8989 push
pad
• Top rod can be extended with
S91 kit (see page 12).
• Outside trim available (see
page 12).
Finish
Silver with black pad (other
finishes to special order)
Escape at all times
Tested to EN1125
43
42
95
20
25.5
1122
24
42
2352
220
210
90
190
45
115
830
54
65
24
Phone +44 (0)1902 364500
www.abloy.co.uk
5
mORTIcE pUSh bAR
EXIT HARDWARE
6
x
990000 series push
bar
Features
Finish
• Push bar
Satin enamel (SE) as standard (stainless
steel and RAL colours are available to
special order)
• Low opening pressure
• Horizontal bars can be cut to size
Panic exit device
• Push bar can also be used with the
range of ABLOY DIN electric lockcases
EL520, EL420, EL560 and EL460
Escape at all times
Tested to EN1125
For external access control
and internal escape
40
21.5
253
130
72
8
1014 or 1264
40
21.5
253
130
92
8
1014 or 1264
31.5
100
Mortice push bar kits
EL520 kit comprises of:
EL560 kit comprises of:
EL420 kit comprises of:
EL460 kit comprises of:
Lockcase
• EL520
• EL560
• EL420
• EL460
Pushbar
• 990000-SE
• 990000-SE
• 990001-SE
• 990001-SE
Outside trim
• 012/120/RT-PZ-72-JPM520
• JPM-912500-SE
• 013/120-RT-PZ-92-JPM420
• 809ZB04------35
Cylinder
• CY326
• CY326
• CY326
• CY326
* please specify backset when ordering
Kits available for 44mm and 54mm doors
Phone +44 (0)1902 364500
www.abloy.co.uk
9000/9300 SERIES TOUch bARS
EXIT HARDWARE
7
9000/9300 series
touch bars
x
9000 touch
bar
Features
Versions:
x
• Minimum protrusion from door (59mm)
• 9000 and 9300 (tested to EN1125)
838mm (900mm door) can be cut down
to minimum 650mm
9300 touch
bar
• 9100 and 9400 (tested to EN1125)
1141mm (1200mm door) can be cut
down to minimum 750mm
Two point Pullman
latches top and
bottom
• Maximum door height 2300mm (for
9300).
Tested to EN1125
• Cannot be chained
• Automatic re-latching
Panic exit device
• Single and double door versions:
Double rebated doors (9000 and 9300*)
Double non-rebated doors (9000 and
9300)
Tested to EN1125
For use on
internal and
external
emergency exits
• Non-handed
• Deadlocking Pullman latches
• Anti-drag mechanism for bottom bolt
• Outside trims available for 9000 only
(see page 12)
• Cross follower on main case
• Use S91 (865mm) extension pieces for
higher doors (page 12)
• Finish: Silver enamel with black touch
bar (other finishes to special order)
• 9000-D-M/S (not tested to EN1125)
Rated: 5 amps/250vAC, 5 amps/30vDC
• horizontal and vertical bars can be cut to
size on site
16
19
122
32
32
59
32
110
45
45
110
838/1141
838/1141
20
48
2300
59
26
* Door co-ordinator required: 914000
Phone +44 (0)1902 364500
www.abloy.co.uk
EXIT HARDWARE
8
fAp 8 SEcURITy TOUch bARS
FAP 8 series
x
E82100
touch bar
High security
panic latch
Tested to
EN1125
Deadlocking
clawbolt action
FAP 8 features
• Non-handed
E82100/E82200/E82300
• CE: Product has been
successfully type tested for
conformity to EN 1125
classification 37611422B.
Regular audit testing is
undertaken
• Smooth and silent operation
• Bars are supplied 850mm long,
suitable for 900mm wide doors
and can be cut down to a
minimum length of 450mm
• For non-rebated double doors use
2 x E82200
• Outside trim available see page
12
• Low projection of 78mm from the
door
• Horizontal bars and vertical rods
can be cut to suit door size
• Very low operating pressure
makes it particularly suitable for
use by small children and door
users with additional needs
Phone +44 (0)1902 364500
www.abloy.co.uk
E82110/E82210/E82310
• 1150mm long versions, available
to special order, suitable for
1200mm wide doors and can be
cut down to a minimum length of
450mm
• FAP 8 panic bars are supplied, as
standard, to be suitable for door
heights of up to 2455mm
• Extension kit available for doors
over 2455mm (KE8000-01/030A)
Finish
Silver (S) or stainless steel (SS) bar
with anthracite body as standard.
(black, white, red and green bar
finishes are available to special
order)
fAp 8 SEcURITy TOUch bARS
x
x
E82200
touch bar
E82300
touch bar
Two point
locking
security panic
bar
Three point
locking
security panic
bar
EXIT HARDWARE
1
1
3
2
2
Phone +44 (0)1902 364500
www.abloy.co.uk
9
pbE SERIES pUSh bARS
EXIT HARDWARE
10
.....................
ABLOY® PBE series
push bars
Designed to operate with Abloy
mechanical, electromechanical and motor
locks.
This range of panic bars is fully compliant
to EN1125 for use on Panic Exit Doors
ensuring escape at all times.
Suitable for narrow stile and solid doors,
single and double door sets, the range
includes the second leaf panic bar for
atheistically pleasing panic escape
solutions to double doors.
x
x
PBE-002
PBE-001
Single side latch
Single side latch
For use with PE590
(Electric Locks cat. page 17)
For use with PE580 and PE480
(Electric Locks cat. page 10)
84
84
101
111
101
50
111
50
35
98
98
21
1236
MAX 1236
42
21
42
Phone +44 (0)1902 364500
www.abloy.co.uk
13
39
52
pbE SERIES pUSh bARS
x
x
PBE-003
PBE-007
Single side latch
Single side latch
For use with PE490
(Electric Locks cat. page 18)
For use on secondary leaf double doors
EXIT HARDWARE
45 mm
Frame
6
5,2
Max=1335
Hinge side
max=2520
23
Max=1226mm
85
46,8
80
24
45
101
84
111
50
35,3
0°
Door
30
10 mm
42
A
5 mm max door gap
B
1236
Max=1100 (EN 1125)
Max=1185
98
21
13
15
B (1 : 2)
A (1 : 5)
Phone +44 (0)1902 364500
www.abloy.co.uk
11
AccESSORIES
EXIT HARDWARE
12
x
x
x
EN3000
EN3300
S91
Outside trim with
lever handle
Outside trim with
knob
Extension kit
JPM range only
JPM range only
Suitable for FAP 89
and FAP 90 series
panic bars
Extension kit for
thicker doors
JPM-KE-2000
extends EN3000 to
80mm thick doors.
21
21
45
45
134
41.6
Strike plates for special
applications, such as
PVCu doors; details
available on request
45
70
100
19
100
91
59
111
111
61
61
212
70
45
22
212
41.6
11
Strikes
EN3000 and EN3300 outside trim
features
• Suitable for FAP8, 89 and 90 series
panic devices and Europad 179
series
• Vandal resistant
• Reversible lever handle/knob
disengages if excessive force
applied
• Non handed
• Selectable, at installation, key
retaining option, which holds the
key captive if the handle has been
unlocked.
• Requires the addition of a single
Euro cylinder, see ABLOY CY326 or
336. Cylinder can be changed
without removing the outside trim.
• Bolt through fixing allows the trim
to be used with all door materials
and types up to 65mm thick
Phone +44 (0)1902 364500
www.abloy.co.uk
Finish
Silver standard. Stainless steel and
other finishes to special order.
STANdARdS
EXIT HARDWARE
Guide to standards relating to door exiting
Standard EN179 covers emergency
escape doors, which applies to areas that
are non-public with trained staff; EN179
provides for escape at all times from the
escape side of the door. The lever handle
or paddle handle needs to be operable
even when side pressure is applied to the
door.
EN1125 covers panic escape doors
applicable in public areas and assemblies.
This standard defines acceptable methods
of egress: the product must be tested and
approved; the standard covers the
complete product.
CE Marking
Products carry a classification code with 9
digits: box 4 indicates Fire Resistance
with 0 = not approved for use on
fire/smoke door assemblies, A = suitable
for use on smoke door assemblies and B
= suitable for use on fire and smoke door
assemblies based on a test - confirming
that the product is suitable for fire/ smoke
doors.
The 9th digit indicates the type of
acceptable operating mechanism:
A = lever handle operation and B = push
pad operation. For example:
3 7 6 0 1 3 4 2 B
25
EN11 ESCAPE
I
N
PA C
S
DOOR
9
EN17 ENCY
G
E
EM R E DOORS
P
ESCA
EN179
Emergency escape
doors
EN1154
Controlled door
closing devices
EN1155
Electrically
powered hold
open devices
CE marking
EN1125
Panic escape
doors
EN1303
Standards
and their impact
Cylinders for
locks
EN1634-1
EN12209
Fire test
standard
Mechanical
resistance:
BS3621
BS8621
BS10621
Building
regulations
PrEN13637
Equality Act
2010
Electrically
controlled
emergency exit
systems
Phone +44 (0)1902 364500
www.abloy.co.uk
13
EXIT HARDWARE
AcAdEmy
A state of the art learning resource for the security industry.
Welcome to our Academy - a new facility for training
and understanding of ASSA ABLOY products and all
aspects of door locking and function.
We recognise that the high performance of our
products can only be realised by the abilities of the
people who install them. We have developed the ASSA
ABLOY Academy to provide training of the highest
standard, and the Academy brand is recognised as a
mark of excellence and accreditation. this gives
reassurance to clients of your competence and
specialist product understanding.
There is an Academy course designed to provide
training in the use of ABLOY® exit hardware, including
master key strategy. To find out more or to receive our
WORKSHOP
14
Phone +44 (0)1902 364500
www.abloy.co.uk
Academy prospectus, simply contact
us by any of the following:
Phone: +44(0)1902 364500
Email: academy@abloy.co.uk
or contact your Sales Account
Manager.
Workshop-based courses provide specific
product training with realistic set up and
applications
EXIT HARDWARE
CLASSROOM
Centre for Excellence
Classroom-based courses give theoretical,
strategic and legislative knowledge relating to
door security and function
Phone +44 (0)1902 364500
www.abloy.co.uk
15
Abloy UK
School Street
Willenhall, West Midlands
WV13 3PW
Phone +44 (0)1902 364500
Fax +44 (0)1902 364501
Email sales@abloy.co.uk
www.abloy.co.uk
Direct line - Sales Office
0845 071 3844 (UK only)
Direct line - Customer Services
0845 071 3855 (UK only)
Calls charged at local network rates
From product supply through to planned and
implemented door control solutions... it’s in our DNA
We are the UK’s leading experts on door locking and functionality. Our product range, including exit
hardware, connects like the molecular diagram below, to form complete, secure, compliant and lasting
solutions trusted by organisations around the UK and Ireland for whom compromise is not an option.
Product supply >
Simply order the products you need from our
friendly and knowledgeable staff
Expertise >
Helpful advice when you need it from our door
control specialists
Planning and specification >
For larger projects, call on us for full service
assessment and planning of your needs, from
fire exiting and compliance to master key
strategies
Due to a continuous programme of development, Abloy UK reserves the right to
make alterations without notice. For technical reasons connected with colour
reproduction the colours shown may vary slightly from those of the product. All
dimensions provided within this catalogue are approximate and for guidance only.
E. & O. E. For terms and conditions of sale, please refer to the current price list.
Abloy UK markets high quality products and accessories for security applications.
Our customer base provides solutions to a broad spectrum of public and private
organisations throughout the UK and Ireland.
An ASSA ABLOY Group company