SHOW GUIDE
Santa Clara Convention Center
CONFERENCE: September 13 - 15
EXHIBITION: Wednesday, September 14
Brought to you by:
PRINTED CIRCUIT
DESIGN & FAB
pcbwest.com
See link for commercial : www.protoexpress.com/quickturn
SEE US IN BOOTH 410
Turnkey assembled PCBs
C I RC U I T S
Quickturn in five days or less
Reliable. Quality. Quickturn.
1108 West Evelyn Avenue
Sunnyvale, California 94086
www.protoexpress.com
Technology on Time
Dream Bigger
Design Better
Push Your Design Potential Further
with Altium Designer.
Visit Altium at
BOOTH
314
From the PCB West 2016 Conference Chair
It was 25 years ago when UP Media Group founder Pete Waddell, then editor of Printed Circuit Design, launched PCB West.
Originally conceived as an in-depth training ground for PCB designers, it has evolved into the premier conference and exhibition for the PCB supply chain in
the Silicon Valley. Consider just how far the industry has come in that time!
We welcome all designers, fabricators and assemblers again this year as we celebrate our 25th anniversary September 13 - 15 at the Santa Clara
Convention Center!
This event focuses on the design and manufacture of PCBs, HDI, electronics assembly and printed circuit board test, and gives engineers, designers, fabricators, assemblers and managers an opportunity to improve skills, increase knowledge and network with peers, colleagues and experts.
Our three-day conference features:
• More than 70 presentations on the hottest topics, including RF and microwave, grounding and new components - our largest conference yet!
• More than 20 day-long tutorials or half-day seminars
• Sessions for all levels of experience and training, from novice
designer and engineer to seasoned pro
• Speakers from Keysight, TTM Technologies, NXP Semiconductor and many more top companies
• The ever-popular Rick Hartley, Eric Bogatin and Susy Webb
• Three free day-long tracks on Wednesday, September 14, with
topics ranging from signal integrity and common design errors to electronics assembly reliability.
Also this week, a special 2.5-day IPC Designers Council Certification
Program powered by EPTAC.
Attend all three days for your best value, or attend for one day.
And remember, all conference attendees receive FREE admittance
to the one-day exhibition Wednesday, September 14, which includes a complimentary luncheon and evening reception, both on
the show floor.
In recognition of 25 years of PCB West, we thank all our past and present speakers, exhibitors and, most of all, attendees. We do this for you.
Looking forward to seeing you at the show!
Mike Buetow
PCB West Guidelines
ADA Requirements
Anyone requiring special ADA assistance as outlined in the ADA, please contact Show Management at the registration desk.
Age Restrictions
No children under the age of 18 are permitted.
Paging
Only emergency paging and show management announcements will be allowed during show hours.
Conference Proceedings
Conference Proceedings are available onsite at the registration desk for $150. Proceedings may also be purchased after the show
online at www.pcbwest.com.
Exhibition Policy/No Suitcasing
Please note that any attendee or exhibitor who is observed to be soliciting business in the aisles or other public spaces, in another
company’s booth, or in violation of any portion of the PCB West Exhibitor Kit will be asked to leave immediately. Please report any
violations to show management at the registration desk.
Security
All PCB West 2016 badges must be visible at all times. Badges indicate the admission type for each
attendee. If your badge is not visible, you will not be permitted inside.
Share
2
THANK YOU SPONSORS
CI RCUI TS
Prototron Circuits, Inc.
America’s Board Shop
™
PCB West Schedule-at-a-Glance
TUESDAY, SEPTEMBER 13
8:30 am
Conference Coffee Break sponsored by Prototron, Booth #519
9:00 am to 5:00 pm
1: The Basics of PCB Design
Speaker: Susy Webb, Design Science
2: Practical Flex-Rigid PCB Design
Speaker: Per Viklund, Mentor Graphics
3: Key Issues for EMI/EMC: How to Design and Build a Compliant System
Speaker: Robert Hanson, Americom
9:00 am to 10:00 am
4: Managing and Reusing Design Blocks that Include Intellectual Property
Speakers: Craig Armenti, Zuken
5: Power Distribution Made Easy
Speaker: Dan Beeker, NXP Semiconductor
6: Manufacturability through Design
Speaker: Scott Fillebrown, Libra Industries
9:00 am to 11:00 am
7: Layout of Switch Mode Power Supplies
10:00 am to 11:00 am
8: Advanced HDI: Not Just for Smartphones Anymore
10:00 am to 12:00 pm
9: Buried Planar Capacitance Materials Reach Higher Performance Levels
Speaker: Rick Hartley, RHartley Enterprises
Speaker: George Dudnikov, Founder PCB
Speaker: Gary Ferrari, FTG
10: How to Fight Magnetic Noise Gremlins
Speaker: Keven Coates, Geospace Technologies
12:00 pm to 1:00 pm
Streamline Lunch-n-Learn
1:00 pm to 3:00 pm
11: Power Integrity and Decoupling Primer for PCB Designers
1:00 pm to 4:30 pm
12: Circuit Grounding to Control Noise and EMI
(Tuesday Conference attendees and speakers only)
Speaker: Ralf Brüning, Zuken
Speaker: Rick Hartley, RHartley Enterprises
13: PCB Stack-up Design and Material Selection
Speaker: Bill Hargin, Nan Ya
1:00 pm to 5:00 pm
14: Effective PCB Design: Techniques to Improve Performance
3:00 pm to 5:00 pm
15: The Mystery of Bypass Capacitors
Share
Speaker: Dan Beeker, NXP Semiconductor
Speaker: Keven Coates, Geospace Technologies
4
PCB West Schedule-at-a-Glance (continued)
WEDNESDAY, SEPTEMBER 14
8:30 am
Conference Coffee Break sponsored by Prototron, Booth #519
8:30 am to 12:00 pm
16: Journey into the Basics of HDI
Speaker: Susy Webb, Design Science
17: 2D, 2.5D and 3D Package Technologies, Guidelines for Design and Process Implementation
Speaker: Vern Solberg
9:00 am to 10:00 am
18: Electromagnetic Fields for Normal Folks
Speaker: Dan Beeker, NXP Semiconductor
19: PCB Manufacturing Today and the Next 10 Years
Speaker: Bryan Fish, Somacis
9:00 am to 11:00 am
20: Signal Attenuation in Very High Speed Circuits
Speaker: Rick Hartley, RHartley Enterprises
21: Design for Assembly
Speaker: Scott Fillebrown, Libra Industries
9:00 am to 12:00 pm
22: Basics of PCB Fabrication
10:00 am to 6:00 pm
Exhibits Open
10:00 am to 2:00 pm
Booth Barista sponsored by Zuken, Booth #401
10:00 am to 12:00 pm
23: PCB Design Techniques to Improve ESD Robustness
Speaker: Gary Ferrari, FTG
Mission City Ballroom
Speaker: Dan Beeker, NXP Semiconductor
24: How to Handle a PCB Project with Embedded Components
Speaker: Jürgen Wolf, Wurth Elektronik
11:00 am to 12:00 pm
25: Evolving Challenges in PCB Design
12:00 pm to 1:00 pm
Lunch event on exhibit floor sponsored by Sierra Circuits, Booth #410
1:00 pm to 3:00 pm
26: An Intuitive Approach to Understanding High-Speed Layout
Speaker: V Ram, Mentor Graphics
Speaker: Keven Coates, Geospace Technologies
27: DFM/DFX for Prototyping PCBs
Speaker: Mark Thompson, Prototron Circuits
28: Ask the Flexperts
Speakers: Mark Finstad, Flexible Circuit Technologies and Nick Koop, TTM Technologies
1:00 pm to 4:30 pm
29: Using HDI in Your PCB Design
Speaker: Amit Bahl, Sierra Circuits
30: Designing with Today’s BGAs
Speaker: Susy Webb, Design Science
31: RF and Mixed Signal Board Design
Speaker: Rick Hartley, RHartley Enterprises
32: Electronic World is Changing – Answers from PCB Technologies in the Upcoming Years
Speaker: Hannes Voraberger, AT&S
2:00 pm to 4:00 pm
33: Alternate Finishes to HASL
3:00 pm to 4:00 pm
34: New Techniques to Address Layout Challenges of High Speed Signal Routing
Speaker: Marita Baldwin and Vince Di Lello, Cadence
3:00 pm to 5:00 pm
35: How to Avoid Hidden Costs and Delays in the Product Design-to-Commercialization Cycle
4:00 pm to 5:00 pm
36: NanoCopper Ink and Paste Printing Developments – Printing Conductive Structures on Rigid,
Flexible and 3D Substrates
Speaker: George Milad, Uyemura
Speaker: Todd Baggett, Todd Dierking and Steven McEuen, Creation Technologies
Speaker: Don Novotny, Intrinsiq Materials
37: Enhancing High-Speed Transmission Using Pre-Emphasis and Equalization Techniques
Speaker: Robert Hanson, Americom
5:00 pm to 6:00 pm
Evening Reception sponsored by Altium, Booth #314
5:00 pm
Complimentary beverages provided by EMA, Booth #400
Share
5
PCB West Schedule-at-a-Glance (continued)
WEDNESDAY, SEPTEMBER 14 FREE DESIGN SESSIONS
*The below sessions indicated with an “F” are free to all exhibition and conference attendees
9:00 am to 10:00 am
F1: 5 SI/PI/EMC Myth-Conceptions Which May Screw up Your Next Design
Speaker: Eric Bogatin, Teledyne LeCroy
F2: MCAD-ECAD with Non-Electrical and Electrical Layers on Flex/Rigid-Flex Designs
Speaker: Edward Acheson, Cadence
10:00 am to 11:00 am
F3: Copper Foil Surface Roughness and its Effect on High Frequency Performance
Speaker: John Coonrod, Rogers
F4: Digital Data Transfer using IPC-2581
Speaker: Hemant Shah, Cadence
11:00 am to 12:00 pm
F5: The Case for Smaller and Simpler Electronics
Speaker: Joe Fjelstad, Verdant Electronics
F6: Extending PCB Design Techniques for Package Design
Speaker: Randall Myers, Mentor Graphics
1:00 pm to 2:00 pm
F7: Intro to Hybrid Design for the PCB Designer
1:00 pm to 3:00 pm
F8: 10 Common Errors in PCB Designs, and How to Catch Them
2:00 pm to 3:00 pm
F9: Next Generation High Density Structures
3:00 pm to 4:00 pm
F10: Defense Industrial Base Assessment: US Bare Printed Circuit Board Manufacturers - Preliminary
Findings of Capabilities and Financial Condition
Speaker: Tim Haag, Intercept
Speakers: Dave Hoover, TTM Technologies and Ray Fugitt, Downstream Technologies
Speaker: Happy Holden
Speaker: Mark H. Crawford, U.S. Department of Commerce
F11: Rule #9: The Most Important Rule for All Engineers
Speaker: Eric Bogatin, Teledyne LeCroy
4:00 pm to 5:00 pm
F12: Reducing PCB Costs through Panel Optimization
Speaker: Pat McGoff, Mentor Graphics
WEDNESDAY, SEPTEMBER 14 FREE ASSEMBLY SESSIONS
*The below sessions indicated with an “F” are free to all exhibition and conference attendees
9:00 am to 10:00 am
F14: Heat Transfer Simulation on FR-4 PCB during Reflow Process
Speaker: Armando Esaú Leal Díaz, Pedro de Alba S/N
F15: Test Method Development for Detecting Pitting/Crevice Corrosion Formation
Speaker: Julie Silk, Keysight Technologies
1:00 pm to 3:00 pm
F17: Electronic Assembly Reliability — Meeting the Challenges of Today’s Design
3:00 pm to 4:00 pm
F18: Understanding PCB Design Variables Which Contribute to Warpage during B2B Board-to-Board/
Module-Carrier Attachment
Speaker: Umut Tosun, Zestron
Speaker: Neil Hubble and Ryan Curry, Akrometrix
Share
6
SEE US IN BOOTH 509
ADVANCED
PCB
S:
WE MAKE YOUR VISION A REALITY
Tuesday Lunch & Learn:
Combining Advanced
Equipment
Capability with Design
Tuesday conference attendees only
Rm 209 -210
12pm - 1pm
Rigid / Rigid-Flex / Multilayer Flex
A PCB manufacturer that now supports
today’s advanced technology chip
requirements (.08 MM BGAs), while
continuing to up hold the Quality &
Reliability needed by the Commercial,
Medical, Aerospace & Military industry.
NADCAP/AS9100 rev. C/ITAR/ISO13485/Mil-Spec55110/ISO9001
•
•
•
•
•
•
•
70 layers (12+ Stacked Vias)
9+Lamination Cycle (Blind and Buried)
IPC 6012/B Class 3 with Copper Wrap
3.23 Mil Hole to Copper Technology
Flat Copper/ Epoxy Filled Vias
1.6 Mil Laser Vias
3 Mil Mechanical Drills
Streamline Circuits • 1401 Martin Avenue, Santa Clara, CA 95050
408.727.1418 phone • 408.727.8971 fax • www.streamlinecircuits.com
PCB West Schedule-at-a-Glance (continued)
THURSDAY, SEPTEMBER 15
8:30 am
Conference Coffee Break sponsored by Prototron, Booth #519
9:00 am to 5:00 pm
38: Do We Really Understand the Meaning of Design for Reliability (DFR)?
Speaker: Gary Ferrari, FTG
39: High Density Design Strategies Including HDI
Speaker: Happy Holden
9:00 am to 10:00 am
40: Managing Backdrilling from Library until Hand-off to Manufacturing
Speaker: Michael Catrambone, Cadence
41: Design and Manufacturing of Wearable PCBs
Speaker: Zulki Khan, NexLogic
9:00 am to 11:00 am
42: Mechanical Issues Affecting EMI
9:00 am to 12:30 pm
43: PCB Design Fundamentals
Speaker: Rick Hartley, RHartley Enterprises
Speaker: Randall Myers, Mentor Graphics
44: Beyond Simulation
Speaker: Susy Webb, Design Science
10:00 am to 11:00 am
45: Taking Designer and Fabricator Collaboration to the Next Level
11:00 am to 12:00 pm
46: Beyond the Board: System Design Considerations
Speaker: Walter Ofer Abramsohn, Frontline
Speaker: Dave Wiens, Mentor Graphics
47: Routing DDR4 Interfaces Quickly and Efficiently
Speaker: Michael Catrambone, Cadence
48: Achieving Signal Integrity and Meeting EMI Radiation Requirements Using High-Speed Connectors
Speaker: Robert Hanson, Americom
12:30 pm to 1:30 pm
Polar Instruments Lunch-n-Learn (Thursday conference attendees and speakers only)
1:30 pm to 5:00 pm
49: Design of Power Distribution and Decoupling
Speaker: Rick Hartley, RHartley Enterprises
50: Design and Assembly Process Principles for Flexible and Rigid Flex Circuits
Speaker: Vern Solberg
51: Designing the Interface for DDR 3/4 and PCIe 3/4 Buses
Speaker: Robert Hanson, Americom
2:00 pm to 3:00 pm
52: Creating and Optimizing a New Hardware Design
3:00 pm to 4:00 pm
53: Mystical Arts vs. Predictive Analytics
Speaker: Farid S. Anani, Mentor Graphics
Speaker: Craig Armenti, Zuken
IPC CERTIFICATION COURSES: POWERED BY EPTAC
THURSDAY, SEPTEMBER 15 THROUGH
SATURDAY, SEPTEMBER 17
9:00 am to 5:00 pm
IPC Designers Certification Program (CID)
Instructor: Kelly Dack
PC Advanced Designers Certification Program (CID+)
Instructor: Mike Creeden
Share
8
SEE US IN BOOTH 300
PCB West Exhibitor List
3Gmetalworx, Inc.
Booth #206
Kyocera
Booth #213
Accurate Circuit Engineering
Booth #300
Landrex Technologies Co., Ltd.
Booth #407
Accutrace, Inc.
Booth #413
Leader Tech, Inc.
Booth #517
Aculon, Inc.
Booth #510
LZY Technology, Inc.
Booth #215
Advanced Circuits
Booth #313
Mentor Graphics Corporation
Booth #306
Akrometrix, LLC
Booth #600
MFS Technology (S) Pte Ltd
Booth #603
All Flex Flexible Circuits & Heaters
Booth #501
MicroConnex
Booth #418
Altium, Inc.
Booth #314
Milestone Technology
Booth #512
American Standard Circuits, Inc.
Booth #219
Multek Interconnect Solutions
Booth #513
ANSYS, Inc.
Booth #608
MVINIX Corporation
Booth #317
Aoshikang Precision Circuit (Hui Zhou) Co., Ltd.
Booth #605
NexLogic Tech., Inc.
Booth #105
APCT, Inc.
Booth #319
Oak-Mitsui Technologies
Booth #202
AT&S Americas LLC
Booth #602
Ohmega Technologies, Inc.
Booth #200
Bay Area Circuits, Inc.
Booth #601
Ojin Industrial Water-saving Equipment Limited (Guangzhou)
Booth #615
Bergquist Company, a Henkel Company, The
Booth #111
Optimum Design Associates
Booth #203
Beta LAYOUT (PCB-POOL ®)
Booth #218
PackageWright
Booth #419
Cadence Design Systems
Booth #408
Panasonic Electronic Materials
Booth #511
CCN
Booth #217
Park Electrochemical Corp.
Booth #612
Cicor Group
Booth #515
Pluritec/Limata
Booth #619
CMR Summit Technologies
Booth #101
Polar Instruments, Inc.
Booth #301
Coast to Coast Circuits, Inc.
Booth #209
Polliwog Corporation
Booth #310
Creation Technologies
Booth #216
Printed Circuits, Inc.
Booth #607
CST of America, Inc.
Booth #211
Prototron Circuits
Booth #519
dalTools
Booth #417
Q & D Circuits Co. Ltd.
Booth #208
Dino-Lite Scopes (Big C)
Booth #506
Qdos Technology Sdn Bhd
Booth #103
Dow Electronic Materials
Booth #415
Quadcept
Booth #311
DownStream Technologies, Inc.
Booth #309
Rogers Corporation
Booth #201
DYCONEX AG
Booth #518
San Diego PCB, Inc.
Booth #119
EDADOC USA, Inc.
Booth #315
San-ei Kagaku Co., Ltd.
Booth #304
Elgris Technologies, Inc.
Booth #610
Sanmina Corporation
Booth #505
EMA Design Automation
Booth #400
Schoeller Electronics Systems GmbH
Booth #609
Fischer Technology, Inc.
Booth #504
Screaming Circuits
Booth #503
Flex Interconnect Technologies
Booth #312
SEP Co., Ltd.
Booth #318
Founder PCB
Booth #616
Shenzhen Suntak Circuit Technology Co., Ltd.
Booth #614
Freedom CAD Services
Booth #107
Sierra Circuits, Inc.
Booth #410
Frontline PCB Solutions
Booth #207
SOMACIS
Booth #618
Goal Searchers Co., LTD Zhuhai
Booth #606
Streamline Circuits
Booth #509
Gold Circuit Electronics
Booth #205
Sunshine Global PCB Group
Booth #416
Green Circuits
Booth #214
Sunstone Circuits
Booth #502
GS Swiss PCB AG
Booth #117
Tempo Automation
Booth #204
Hawk Ridge Systems
Booth #109
Ticer Technologies
Booth #414
HSIO Technologies
Booth #115
TMS Representatives, LLC
Booth #611
HX Circuit Technology Co., Ltd.
Booth #613
TTM Technologies, Inc.
Booth #305
Insulectro
Booth #212
Ventec International Group
Booth #411
Intercept Technology, Inc.
Booth #500
Victory Giant Technology (Huizhou) Co., Ltd.
Booth #617
IPC-2581 Consortium
Booth #409
Westak, Inc.
Booth #302
Isola Group
Booth #210
Wurth Electronics
Booth #516
Javad EMS Inc.
Booth #514
Zero Defects International
Booth #405
JetPCB Web LLC
Booth #604
Zuken
Booth #401
K ALPHA
Booth #113
Kingroad Elec. Co., Ltd. Zhuhai
Booth #508
Share
10
PCB West Exhibit Floor (Located in the Mission City Ballroom)
Share
11
PCB West Exhibitors
3Gmetalworx, Inc.
Booth #206
2-90 Snow Blvd. Concord, ON L4K 4A2
Canada
P: 289-845-3506
3gmetalworx.com
3Gmetalworx is a specialized manufacturer of EMI shielding
solutions.
Advanced Circuits
Booth #313
21101 East 32nd Parkway Aurora, CO 80011
P: 800-979-4722
E: sales@4pcb.com
4pcb.com
Advanced Circuits manufactures PCBs ranging from prototypes to complex designs and large-scale production. Our
high-quality standards, dependability and small-quantity
quickturn PCB assembly services make us the one-stop solution for your PCB requirements.
Akrometrix, LLC
Accurate Circuit Engineering Booth #300
3019 S. Kilson Drive Santa Ana, CA 92707
P: 714-546-2162
F: 714-546-8134
E: james@ace-pcb.com
ace-pcb.com
Accurate Circuit Engineering is a high-tech/quickturn manufacturer of high-speed hybrid and high layer count PCBs. We
offer a one-stop solution with PCBs in as little as 24 hrs. ACE is
AS9100C, Mil-Spec and ITAR certified. Accutrace, Inc.
Booth #413
2986 Scott Blvd
Santa Clara, CA 95054
P: 408-748-9600
F: 408-748-1982
sales@pcb4u.com
PCB4u.com
Located in the Silicon Valley since 1995. A pioneer in quickturn prototype to production of HDI PCBs. Unparalleled customer service. A
leader in quality/price. Full turnkey quotes (components, labor, bare
boards) online. Upload your BOM and receive a quote in minutes.
Aculon, Inc.
Booth #510
11839 Sorrento Valley Road, Suite 901
San Diego, CA 92121
P: 858-925-5828
E: gattuso@aculon.com
aculon.com
Aculon specializes in nanoscale PCB waterproofing technologies
and stencil nanocoatings for optimum print performance.
Share
Booth #600
2700 NE Expressway, Building B, Suite 500
Atlanta, GA 30345
P: 404-486-0880
F: 404-486-0880
E: emoen@akrometrix.com
akrometrix.com
Akrometrix is the worldwide leader of thermal warpage metrology systems and test services for the electronics industry.
We measure warpage of substrates and materials at critical temperatures, providing graphical, statistical, and tabular results.
All Flex Flexible Circuits & Heaters Booth #501
1705 Cannon Lane Northfield, MN 55057
P: 877-663-7162
E: dbecker@allflexinc.com
allflexinc.com
A flexible circuit and heater manufacturer providing prototype
to high volumes with component assembly. For nearly 25 years,
All Flex has supplied flexible solutions to the aerospace, military, medical, industrial, and instrumentation markets.
Altium, Inc.
Booth #314
2175 Salk Ave, Suite 200
Carlsbad, CA 92008
P: 760-231-0760
F: 760-231-0761
E: sales.na@altium.com
altium.com
Known for excellence in native 3D PCB editing, Altium Designer
incorporates the tools engineers and PCB designers need into
a stress-free single user interface, while increasing design successes and reducing overall design times.
12
With us you have time-to-market advantage!
www.PCB4u.com
ITAR
408-748-9600
I SO 9001:2008
sales@PCB4u.com
UL Approved
PCB West Exhibitors (continued)
American Standard Circuits, Inc. Booth #219
475 Industrial Drive West Chicago, IL 60185
P: 630-639-5444
F: 630-293-1240
E: sales@asc-i.com
asc-i.com
Specialized in advanced RF/microwave, ultra-speed digital
mixed signal rigid and flexible PCBs. Defense, aerospace, medical, advanced industrial material and thermal PCB solutions.
Quickturn 2- to 24-layer packages for commercial and defense.
ANSYS, Inc. Booth #608
2600 ANSYS Drive Canonsburg, PA 15317
P: 844-462-6797
F: 724-514-9494
E: mark.ravenstahl@ansys.com
ansys.com
ANSYS brings clarity and insight to customers’ most complex
design challenges through fast, accurate and reliable engineering simulation. Our technology enables organizations to predict
with confidence that their products will thrive in the real world.
Aoshikang Precision Circuit (Hui
Zhou) Co., Ltd. Booth #605
Changbu Village, Huiyang District Huizhou Guangdong 516223
China
P: +8613502239120
F: 86 07523532665
E: ivyliqin@askpcb.com
askpcb.com
We offer a complete one-stop solution for PCBs, with good 24hour customer service, good LT, quality and competitive prices.
Our customers are from across Asia, the US and Europe.
APCT, Inc. Booth # 319
3495 De La Cruz Blvd Santa Clara, CA 95054
P: 408-727-6442
F: 408-988-3971
E: Info@APCTinc.com
APCTinc.com
APCT manufactures high-reliability rigid PCBs. We support
standard to highly advanced technologies in world-class cycle
times. Quantities range from prototype to mid-production, with
complete program management from our offshore partnerships.
AT&S Americas LLC Korea. AT&S has the most advanced high-tech facility for mass
production of HDI printed circuit boards in China.
Bay Area Circuits, Inc. Booth # 601
44358 Old Warm Springs Blvd. Fremont, CA 94538
P: 510-933-9000
F: 510-933-9001
E: info@bacircuits.com
bayareacircuits.com
Bay Area Circuits, a Silicon Valley-based printed circuit board
manufacturer, has been serving the quickturn prototyping and
production PCB needs of high-tech electronics manufacturers,
contract assemblers, and design engineers for over 40 years.
The Bergquist Company,
a Henkel Company Booth #111
18930 W 78th St. Chanhassen, MN 55317
P: 952-835-2322
E: jannaf@bergquistcompany.com
bergquistcompany.com
Bergquist, a Henkel brand, manufactures high-performance
thermal management materials that offer exceptional thermal
control for today’s advanced electronics devices.
Beta LAYOUT (PCB-POOL®) Booth #218
4777 Sunrise Blvd., Suite G
Fair Oaks, CA 95628
P: 916-241-9062
E: tony.shoot@beta-layout.us
pcb-pool.com
Under the renowned brand PCB-POOL®, Beta LAYOUT provides quick-turn PCB prototype manufacturing. FREE laser
SMT stencils are offered with PCB-POOL® prototype orders,
on time or FREE guarantee. A wide range of PCB technologies are available.
Booth #602
1735 N First Street Suite 245
San Jose, CA 95112
P: 408-573-1211
F: 408-573-1911
E: a.daudt@ats.net
ats.net
AT&S is the largest and technology-leading producer of printed
circuit boards in Europe, with plants in Austria, China, India and
Share
14
PCB West Exhibitors (continued)
Cadence Design Systems Booth #408
2655 Seely Avenue San Jose, CA 95134
P: 408-943-1234
F: 408-428-5001
E: jhall@cadence.com
cadence.com
Cadence provides Allegro and OrCAD PCB design technologies
with unique, cost-effective, and scalable capabilities for designing
electronics products. Visit us to see new technologies that
shorten your design cycle and accelerate product creation.
CCN Booth #217
105 S. Sunset Street, Suite J
Longmont, CO 80501
P: 303-872-7700
E: office@ccnlabs.com
ccnlabs.com
Simply your best test partner. CCN connects fabrication to highspeed and high-frequency design with advanced PCB test systems, dielectric test systems, and circuit board probe stations,
all supported with test services traceable to national labs.
packaging substrates. We are also the established leader in LCP
PCB design and manufacture.
Creation Technologies Booth #216
1873 Barber Lane Milpitas, CA 95035
P: 877-734-7456
E: janelle.urchenko@creationtech.com
creationtech.com
Creation Technologies is a global, award-winning EMS provider with people who specialize in eliminating barriers to
help our customers design, commercialize, manufacture and
sustain their products to realize market growth and long-term
business success.
CST of America, Inc. Cicor Group Booth #515
Leutschenbachstrasse 95 Zurich, ZH 8050
Switzerland
P: +41 43 811 44 05
E: eric.maletich@cicor.com
cicor.com
Cicor is a globally active group of leading companies in
the electronics industry. We provide complete outsourcing
services and a broad range of technologies for the manufacture of highly complex PCBs, 3D-MID solutions, hybrids and
electronic modules.
CMR Summit Technologies
Booth #101
473 Sapena Court Suite 11
Santa Clara, CA 95054
P: 408-844-9550
E: jgarcia@cmrsummit.com
cmrsummit.com
CMR Summit Technologies of Silicon Valley provides state-of-theart printed circuit board designs, manufacturing and complete assembly of all types of load boards, probe cards and test boards.
Coast to Coast Circuits, Inc. Booth #209
5331 McFadden Ave. Huntington Beach, CA 92649
P: 714-898-4901
E: lbchristensen@speedycircuits.com
c3circuits.com
Coast to Coast Circuits specializes in the manufacture of bare
printed circuit boards (PCBs), flex and rigid-flex circuits, and IC
Share
Booth #211
492 Old Connecticut Path, Suite 500
Framingham, MA 01701
P: 508-665-4400
F: 508-665-4401
E: megan.schmidt@cst.com
cst.com
CST offers accurate, efficient computational solutions for
electromagnetic design and analysis. Our 3D EM simulation
software is user-friendly and enables you to choose the most
appropriate method for design and optimization.
dalTools Booth #417
5410 Carrington Drive Richardson, TX 75082
P: 972-464-6630
E: sales@daltools.com
daltools.com
dalTools serves Cadence Allegro PCB users, providing software
applications that result in “Better, Faster and Easier PCB and IC
Package Design!” We guarantee over 80 add-in commands for
Allegro will improve productivity by over 30%.
Dino-Lite Scopes (Big C) Booth #506
19803 Hamilton Av, Ste 200 Torrance, CA 90502
P: 310-618-9990
E: sales@dinolite.us
dinolite.us
Dino-Lite digital microscopes provide 10x-220x magnification,
with features such as adjustable polarizer. License-free software
with ability to capture images and videos, annotate and perform
measurements, and share discoveries.
16
Flex Your
Design Skills
Innovative Flex Design
Starts with OrCAD
The new flex and rigid-flex enabled OrCAD 17.2
has been shown to reduce rigid-flex design time
by 25%—all while eliminating manufacturing
errors common to flex circuit technology.
Start your next rigid-flex project off the
right way with OrCAD 17.2.
OrCAD rigid-flex design in action:
go.ema-eda.com/OrCAD-Rigid-Flex
SEE US IN BOOTH 400
PCB West Exhibitors (continued)
Dow Electronic Materials Booth #415
455 Forest Street Marlborough, MA 01752
P: 508-229-7646
E: cpaydos@dow.com
dowelectronicmaterials.com
Dow Electronic Materials is a leading materials supplier for all
aspects of metallization and imaging of printed wiring boards.
DownStream Technologies, Inc. Booth #309
225 Cedar Hill Street #333
Malborough, MA 01752
P: 800-535-3226
F: 508-481-0362
E: joec@downstreamtech.com
downstreamtech.com
DownStream tools optimize and automate the PCB release process. CAM350 verifies and optimizes a design to drive fabrication. BluePrint-PCB produces documents to drive fabrication.
DFMStream provides easy-to-use manufacturing analysis tools.
DYCONEX AG Booth #518
Grindelstrasse 40 Bassersdorf 8303
Switzerland
P: 0041 43 266 1100
F: 0041 43 266 1101
E: mail.dyconex@mst.com
mst.com/dyconex
DYCONEX provides complex ultra-HDI/microvia, high-frequency
and high-reliability PCBs in flex, rigid-flex, and rigid technology
for markets such as medical technology, aerospace and defense,
and microwave and RF. DYCONEX is an MST company.
EDADOC USA, Inc. Booth #315
1851 McCarthy Blvd Ste #201 Milpitas, CA 95035
P: 408-930-6636
E: axiao@pcbdoc.com
en.edadoc.com
EDADOC USA is the largest PCB design center that provides
professional turnkey PCB services, including layout, SI/PI simulation, fabrication, assembly, testing and box-build. We also do
prototype and production for all your PCB requests.
Elgris Technologies, Inc. Booth #610
465 Stony Point Road, #236
Santa Rosa, CA 95401
P: 707-237-2794
E: sales@elgris.com
elgris.com
Elgris Technologies is a leading provider of interoperability tools
and services that allow to translate (or generate) schematic/
symbol library/layout data between EDA formats. Main products: E-studio Pro, E-studio for test, E-station and E-Builder.
Share
EMA Design Automation Booth #400
225 Tech Park Drive Rochester, NY 14623
P: 585-334-6001-216
E: CARLYA@EMA-EDA.COM
ema-eda.com
EMA Design Automation offers leading PCB development solutions, including PCB design software, SI/SPICE analysis and
verification, engineering data management, consulting services,
training, and support. EMA is a Cadence Channel Partner supporting OrCAD, PSpice, Sigrity and Allegro.
Fischer Technology, Inc. Booth #504
800 Airport Blvd. Burlingame, CA 94010
P: 650-513-1298
F: 650-513-1298
E: info@fischer-technology.com
fischer-technology.com
To meet the demands of PCB measurements, Fischer Technology
has developed a line of PCB application-specific x-ray fluorescence
(XRF) instruments. Visit our PCB website: www.pcb-xray.com.
Flex Interconnect Technologies
Booth #312
1603 Watson Court Milpitas, CA 95035
P: 408-635-3544
Fax: 408-956-8278
E: sales@fit4flex.com
fit4flex.com
Flex Interconnect Technologies (FIT) designs, manufactures, and
assembles flex circuits, rigid-flex, and HDI flex as quickturn prototypes and high-volume. FIT is certified to AS9100C and is ITAR
registered. FIT also offers Samtec’s data link cables.
Founder PCB Booth #616
2033 Gateway Place Suite 500 San Jose, CA 95110
P: 408-573-6900
E: george.dudnikov@founder.com
founderpcb.com
Leading edge PCB fabricator based in China with office in US
(Silicon Valley). Capabilities focused on higher layer count multilayer boards, backplanes, HDI and signal integrity. Dedicated
QTA/NPI quickturn factory. New technology R&D.
18
PWR
Integrity
Schematic
Capture
PCB
Layout
Electrical
Engineering
Thermal
Analysis
SEE US IN BOOTH 107
Schematic
Integrity
On-Site
Contract
Designers
Turnkey
Proto
Manufacturing
Mechanical
Engineering
Database
Translations
Library
Mgmt.
WE HAVE ALL THE PIECES TO SOLVE YOUR
ELECTRONIC DESIGN CHALLENGES
World-Class PCB Design & Engineering Solutions
Trust our experienced team of Engineers and Designers to help
bring your product from a concept to a reality. Whether it’s a
simple layout or a complete product development, we’re here to
get the job done on time and on budget.
>
>
>
>
>
>
>
>
Complete Engineering Project Management
Circuit / Schematic Design & Analysis
Power / Voltage Drop Analysis
Component Analysis / Evaluation
Signal Integrity Simulation & Analysis
Mechanical Engineering
PCB Layout Team Available 24/7
Largest Privately Owned, Independent Service Provider
in the USA
FreedomCAD.com
(603) 864-1303
PCB DESIGN • ELECTRICAL ENGINEERING • MECHANCIAL DESIGN • SCHEMATIC CAPTURE • TURNKEY MFG.
PCB West Exhibitors (continued)
Green Circuits Freedom CAD Services Booth #107
20 Cotton Road, Suite 201
Nashua, NH 03063
P: 714-480-7600
F: 603-864-1301
E: scott.mccurdy@freedomcad.com
freedomcad.com
Established in 2003, Freedom CAD is one of the largest PCB design and engineering services firms in North America. With over
40 designers and engineers located in 14 states, we provide
layout and engineering of complex multilayer PCBs and protos.
Frontline PCB Solutions Booth #207
2 Oppenheimer Street, Third Floor
Rehovot 7670102
Israel
P: 972-8-9322183
F: 972-8-9322186
E:efrat@frontline-pcb.com
frontline-pcb.com
Frontline PCB Solutions presents InStack Design, an industryproven solution for designing complex stack-ups in minutes,
taking all fabrication and SI constraints into account. Collaborate with board fabricators electronically and seamlessly.
Goal Searchers Co., LTD Zhuhai Booth #606
Building C, No.2, Cuizhu 2nd Street, Cuizhu Industrial Zone
Zhuhai Guangdong 519070
China
P: 86-756-8633473
F: 86-756-8619597
E: info@goalsearchers.com
goalsearchers.com
Goal Searchers Co., Ltd. Zhuhai (GSH), was established on January 1, 1999, and is located in southern China. We provide all customers with higher quality, better service and competitive prices.
Gold Circuit Electronics Booth #205
2033 Gateway Place, Suite 615
San Jose, CA 95110
E: dvaks@gcegss.com
gce.com.tw
A professional multilayer PCB manufacturing company specializing in the production of medium and high technology products. Dedicated to “Quality the Best, Customer the First.”
Share
Booth #214
1130 Ringwood Ct. San Jose, CA 95131
P: 408-608-4446
E: hluu@greencircuits.net
greencircuits.net
Green Circuits provides high-quality, full turnkey PCBA services for quickturn prototype boards to complex designs, and
large-scale production builds. Certified ISO 9001 and 13485. We
guarantee the best quality PCBA.
GS Swiss PCB AG Booth #117
Faennring 8 Kuessnacht am Rigi Schwyz 6403
Switzerland
P: +41 41 854 48 00
E: sarah.bieri@swisspcb.ch
swisspcb.ch/
Manufacturer of highly miniaturized and high-reliability PCBs.
Swiss quality substrates for implants and medical devices.
Extensive testing capabilities, including IST-test. Flex, rigid-flex
and multilayer with ultra-fine line technology (15µm/15µm).
Hawk Ridge Systems Booth #109
4 Orinda Way Orinda, CA 94563
P: 877-266-4469
F: 510-482-6225
E: kimberlye@hawkridgesys.com
hawkridgesys.com
Announcing Solidworks PCB - powered by Altium. As the #1
worldwide solutions provider of Solidworks 3D CAD, Hawk Ridge
Systems now provides the best of both worlds: powerful PCB design tools and seamless integration with 3D mechanical design.
HSIO Technologies Booth #115
13400 68th Ave. No. Suite 110
Maple Grove, MN 55311
P: 763-447-6260
E: randy.knudsen@hsiotech.com
hsiotech.com
HSIO Circuit Technologies flex and rigid flex PCB manufacturing,
featuring <35 micron lines and spaces and 10 micron feature
sizes. Grypper socket products are unique in that they require
no lid and the same footprint as the device under test.
HX Circuit Technology Co., Ltd. Booth #613
7th Floor, HuachuanGda YiJing Building 45 District Bao’an
District
Shenzhen Guangdong 518101
China
P: 86-755-2941-8801
E: annie@hx-circuit.com
hx-circuit.com
HX Circuit is a manufacturing enterprise engaged in high-density multilayer and special type PCBs. The culture of better technology, better life, HX circuit is your perfect PCB manufacturer.
20
PCB West Exhibitors (continued)
Insulectro Booth #212
20362 Windrow Drive Lake Forest, CA 92630
P: 949-587-3200
E: jlee@insulectro.com
insulectro.com
Insulectro is the largest supplier of PCB and PE materials used
to manufacture circuit boards. Insulectro delivers its premier
product offering from 10 strategic US stocking locations. We offer fabrication capabilities and technical support services.
Intercept Technology, Inc. Booth #500
2221 Peachtree Road, Ste. D-211
Atlanta, GA 30309
P: 404-352-0111
F: 404-355-3744
E: sales@intercept.com
intercept.com
Intercept Technology offers tailored PCB/hybrid/RF and highspeed solutions for all flavors of EDA design environments.
IPC-2581 Consortium Booth #409
270 Billerica Road Chelmsford, MA 01824
P: 978-262-6540
E: susanz@cadence.com
ipc-2581.com
IPC-2581 Consortium is a group of PCB design and supply chain
companies to enable, facilitate and drive the use of IPC-2581 in
the industry. It is devoted to accelerating the adoption of IPC2581 as an open, neutrally maintained global standard.
Isola Group Booth #210
3100 W Ray Road, Suite 300
Chandler, AZ 85226
P: 480-893-6527
E: tiffany.zinn@isola.com
isola-group.com
Isola, headquartered in Chandler, Arizona, is a global material sciences company focused on designing, developing,
manufacturing and marketing copper-clad laminates and
dielectric prepregs used to fabricate advanced multilayer
printed circuit boards.
Javad EMS Inc. Booth #514
900 Rock Avenue
San Jose, CA 95131
P: 408-770-1700
E: g.walker@javadems.COM
javad.com
Located in Silicon Valley, JEMS has approximately 40,000
square feet of world-class manufacturing of PCBAs and system
level builds. ISO9001, ISO13485, AS9100 certified and ITAR
registered. Low- to medium-volume, high-mix manufacturing,
including prototypes.
Share
JetPCB Web LLC Booth #604
2055 Junction Avenue, Suite 135
San Jose, CA 95131
P: 408-922-7278
F: 408-922-7275
E: sales@jetpcb.com
us.jetpcb.com/
Experts of prototype and quickturn PCBs.
K ALPHA Booth #113
1125 Remington Road Schaumburg, IL 60173
P: 847-781-3523
E: leone@kalphaxray.com
kalphaxray.com
K ALPHA manufactures, sells and provides service and application support for XRF instrumentation for accurate measurement
and analysis of plating thickness. Stop by our booth to discuss
our stable, reliable, easy-to-use, cost-effective solutions.
Kingroad Elec. Co.,Ltd. Zhuhai Booth #508
Sanzao Science and Tech Ind Zone Jinwan District Zhuhai City
Guangdong Province
Zhuhai Guangdong 519040
China
P: 86-756-6320973
F: 86-756-3990769
E: kingroad-001@zhjlpcb.com
zhjlpcb.com
Kingroad can provide MCPCBs with structure for single-sided
PCBs, double-sided PCBs and multilayer. Applications for automotive, LED lighting, power supply, equipment, etc. We have
full solutions for your MCPCB projects.
Kyocera Booth #213
8611 Balboa Avenue San Diego, CA 92123
P: 858-576-2600
E: iris.labadie@kyocera.com
americas.kyocera.com/kai-semiparts
Kyocera offers an extensive array of high-density PCBs, PWBs,
organic and ceramic packages for numerous applications and
solid-state devices, including RF/MW, ASICs, FPGAs, MPUs,
graphics processors, data centers, telecom, avionics and space.
Landrex Technologies Co., Ltd.
Booth #407
510 State Street Suite 235
Santa Barbara, CA 93101
P: 805-845-5011
F: 805-845-5082
E: j.gibson@landrex-us.com
landrex.com.tw/eindex.asp
Landrex Technologies was established in 1989 as a global test and
inspection solution provider. Our goal is to continue providing stateof-the-art solutions in the industries we serve on a global scale. FAI,
AOI, ATE, flying probe, robotic handling, fixtures and automation.
22
Product Design (HW/SW)
New Product Introduction
Production
NEXLOGIC
YOUR EMS PARTNER
SEE US IN BOOTH 105
20 Year Preferred PCB Vendor for Fortune 100 companies
www.nexlogic.com/pcbwest
1.888.NexLogic
PCB West Exhibitors (continued)
Leader Tech, Inc. MicroConnex LZY Technology, Inc.
Milestone Technology Booth #517
12420 Racetrack Road Tampa, FL 33626
P: 813-855-6921
F: 813-855-3291
E: sjackson@leadertechinc.com
leadertechinc.com
Leader Tech is a US manufacturer of EMI shielding products. We
offer full engineering support; off-the-shelf and custom board
level shields; enclosure shielding gaskets (MIL-DTL 83528E certified compounds) and cable shielding ferrites.
Booth #215
1762 Technology Drive, Suite 223
San Jose, CA 95110
P: 408-819-2740
F: 408-963-0877
E: aida-sz@lzy.cn
lzy.cn
Printed circuit board assembly, wire, cable, cable harness
assembly. ISO13485, ISO9001, TS16949, UL listed and TUV certified. Main scope: EMS, wire harness, custom wire and cable,
solar products, EV products, and energy storage.
Booth #418
34935 SE Douglas St #110
Snoqualmie, WA 98065
P: 425-396-5707
F: 425-396-5861
E: info@microconnex.com
microconnex.com
Flexible printed circuits. High-density, fine-line, fine-pitch (less
than 2 mil trace/space). Prototyping to production. Laser drilled
blind, buried and through-hole microvias. Laser micromachining and drilling. Thin-film plasma and deposition.
Booth #512
1292 Kifer Road, Suite 810
Sunnyvale, CA 94086
P: 408-530-8378
E: neeru@milestonefalab.com
milestonefalab.com
Milestone Technology is a failure analysis lab providing services
for PCBs, MEMS, semiconductors, LED, medical devices, solar,
electronics, coating, and ceramics. Contact us at 408-530-8378
or visit www.milestonefalab.com.
Multek Interconnect Solutions Mentor Graphics Corporation
Booth #306
8005 SW Boeckman Road Wilsonville, OR 97070
P: 503-685-1000
E: jennifer_chausse@mentor.com
mentor.com/pcb
Visit our scalable PCB design solutions, including PADS, Xpedition and HyperLynx products. For more information, visit www.
mentor.com/pcb.
MFS Technology (S) Pte Ltd Booth #603
801 Lorong 7 Toa Payoh #02-01 Wearnes Building Singapore 319319
Singapore
P: (65) 6861-3168
F: (65) 6862-2052
E: kerinekang@mfstechnology.com
mfstechnology.com
MFS Technology is a world-class innovative partner for interconnect solutions (FPC/RF/PCB). We will premiere technology at the
upcoming 2016 PCB West Show.
Share
Booth #513
6201 American Center Drive San Jose, CA 95002
P: 408-881-4850
E: stephen.sims@multek.com
multek.com
Delivering powerful PCB and flexible circuit solutions that enable our customers’ success. Multek’s end-to-end PCB services
provide a full range of interconnect solutions, from advanced
design to mass production.
MVINIX Corporation Booth #317
2210 Lundy Ave San Jose, CA 95131
P: 408-321-9109
E: info@mvinix.com
mvinix.com
Prototype specialists and flex circuit experts. PCB assembly,
PCB fabrication, PCB layout design, PCB rework, BGA rework/
reball, testing and box build. Full turnkey quickturns.
24
GUARANTEED
40%
Water Saving For PCB
FREE Consulting, Estimate, Installation, Technical Support and Maintenance
No Set-Up Fees | No Risk | No Initial Cost
Visit us at Booth 615
www.ojin.ca
Ojin Industrial Water-saving
CNL Technology Inc.
Equipment Limited
Toronto, Canada
Guangzhou, China
T: +1-647-406-8499
T: +86-20-62833136
E: info@ojin.ca
E: Ojin1111@163.com
PCB West Exhibitors (continued)
Optimum Design Associates NexLogic Tech., Inc. Booth #105
2085 Zanker Road San Jose, CA 95131
P: 866-845-1197
E: zulki@nexlogic.com
nexlogic.com
As a leading provider of PCB design, PCB fabrication, PCB assembly, product design (HW/SW) and NPI services, NexLogic
provides you with a unique, streamlined, one-stop solution for
all of your printed circuit board needs.
Oak-Mitsui Technologies Booth #202
80 First Street Hoosick Falls, NY 12090
P: 408-483-5413
F: 518-686-8080
E: sales@faradflex.com
faradflex.com
Oak-Mitsui Technologies is a wholly owned subsidiary of Mitsui
Kinzoku. The companies’ strengths include expertise in copper
foil manufacturing and resin technology. We offer FaradFlex, a
high-performance ultra-thin laminate.
Ohmega Technologies, Inc. Booth #200
4031 Elenda Street Culver City, CA 90232-3799
P: 310-559-4400
F: 310-837-5268
E: bmahler@ohmega.com
ohmega.com
Ohmega Technologies produces OhmegaPly, a thin film NiP
resistive material. Applications include R-cards, shields,
heater elements, power dividers, pull-up/pull-down and
terminating resistors.
Ojin Industrial Water-saving
Equipment Limited (Guangzhou)
Booth #615
Room 312 Yunquan Business Center, No. 38 North Station Road Sanyuanli Avenue, Yuexiu District
Guangzhou Guangdong 510403
China
P: 86-20-62833136
E: info@ojin.ca
ojin.ca
Guaranteed 40% water-saving in PCB production. Zero investment.
Minimum running costs. No adverse effects on PCB products’
quality. Free consulting, estimation, installation, technical support,
and maintenance. Share a portion of the savings with us.
Share
Booth #203
1075 Serpentine Lane Pleasanton, CA 94566
P: 925-401-2004
F: 925-401-2010
E: sales@optimumdesign.com
optimumdesign.com
Optimum Design Associates (ODA) provides award-winning
PCB layout, engineering and in-house turnkey EMS. It offers
one of the most comprehensive one-stop, medium-volume
full-service manufacturing facilities on the West Coast. ISO
9001:2008/13485.
PackageWright Booth #419
110 S Race Street, Suite 201
Urbana, IL 61801
P: 217-383-0153
F: 217-383-0152
E: info@packagewright.com
packagewright.com
PackageWright offers unique capabilities for building and
maintaining PCB libraries to support ECAD and MCAD design. PackageWright provides over 100 3D package templates,
footprint generation from 3D models, and automated library
synchronization.
Panasonic Electronic Materials Booth # 511
2 Riverfront Plaza Newark, CA 07102
P: 408-660-0866
F: 408-660-0866
E: rick.trunnell@us.panasonic.com
panasonic.com
Panasonic Electronic Materials Group has set the standard for
high-speed, low-loss and thermally robust substrates.
Panasonic’s MEGTRON series of laminates and prepreg defines
a “bulletproof” solution for today’s designers.
Park Electrochemical Corp. Booth #612
48 S. Service Road, Suite 300
Melville, NY 11747
P: 631-465-3600
E: jmancusi@parkelectro.com
Park Electrochemical Corp. is a global advanced materials company.
Pluritec/Limata
Booth #619
720 N. Valley Road
Anaheim, CA 92801
P: 916-473-2140
C: 916-869-3000
Pluritec and Limata have combined resources with Lino Sousa as
VP sales to provide affordable technology-driven drill/rout/x-ray optimizer, laser direct imagers and multicolor solder mask systems.
26
PCB West Exhibitors (continued)
Q & D Circuits Co. Ltd. Polar Instruments, Inc.
Booth #301
18649 SW Farmington Road Beaverton, OR 97007
P: 503-356-5270
E: ken.taylor@polarinstruments.com
polarinstruments.com
Polar understands your PCB signal integrity needs. Our easy-touse tools equip the industry from pre-design to post-fabrication
test, offering simulation, documentation, design and test tools
seamlessly interfaced for accuracy and efficiency.
Polliwog Corporation Booth #310
6F Sindoricoh, 514-1, Yatap-dong, Bundang-gu, Seongnam-si,
Gyeonggi-do, Korea (463-839) Seongnam-si Gyeonggi-do 463-839
Korea (South)
P: +82-31-712-4128~9
F: +82-31-712-4139
E: eylee@polliwogeda.com
polliwogeda.com
PollEx Suites are PCB design review tools capable of importing
PCB design data and checking for design errors in manufacturing, electrical and thermal performances, as well as DFM, DFA,
DFE, and signal integrity.
Printed Circuits, Inc.
Booth #607
1200 West 96th Street
Bloomington, MN 55431-2699
P: 952-888-7900
E: bburns@printedcircuits.com
printedcircuits.com
High-reliability “never fail” rigid-flex and multilayered flex used
in medical, military, aerospace and other life-critical applications. Choose us if you’re new to rigid-flex design and construction or want to improve your packaging density and reliability.
Prototron Circuits, Inc.
America’s Board Shop
Prototron Circuits Booth #519
15225 NE 95th Street Redmond, WA 98052
P: 425-823-7000
F: 425-869-2515
E: russa@prototron.com
prototron.com
Prototron Circuits is a domestic quickturn PCB manufacturer
with facilities in Tucson, AZ and Redmond, WA. Both are ISO
certified and ITAR registered. Our AZ shop is Mil 55110 certified.
Visit www.prototron.com for a quote.
Share
Booth #208
Block A1, FuFa Industrial Park, Fuyuan 1st Rd, FuYong, BaoAn,
ShenZhen, China Shenzhen Guangdong 518103
China
US office: 198 Desert Bloom
Irvine, CA 92618
P: +86-755- 61508065
F: +86-755-29919826
E: sales18@qdcircuits.com.cn
qdcircuits.com
PCB manufacturer. Multi-variety prototype, small and medium
volume. High quality. Quick response.
Qdos Technology Sdn Bhd Booth #103
No. 99, Lebuhraya Kampung Jawa Lepas Industrial Estate
Penang 11900
Malaysia
P: +60 464 20000
E: ann.kam@qdos.com.my
qdos.com.my
QDOS is a pioneer manufacturer of flexible printed circuits
(FPC) and molded interconnect substrates (MIS) in Malaysia. We
provide comprehensive solutions ranging from circuit design,
quickturn prototypes to high-volume production.
Quadcept Booth #311
2372 Walsh Avenue Santa Clara, CA 95051
P: 408-800-7362
E: yoshi@4cept.com
quadcept.com
Quadcept offers an innovative online CAD solution where you
only pay a monthly or annual fee. Start using CircuitDesigner
with convenient net/component grouping features and crossprobing or PCBDesigner with DFE/DFM rule checker from just
$39 a month!
Advanced Connectivity Solutions
Rogers Corporation Booth #201
100 South Roosevelt Ave. Chandler, AZ 85226
P: 480-961-1382
F: 480-961-4533
E: sheryl.dehning@rogerscorp.com
rogerscorp.com
Rogers develops high-performance PCB materials for use in portable communications, communications infrastructure, and aerospace and defense. Key products include RO4000 LoPro, RO3000,
RT/duroid, TC Series, AD Series and CLTE Series laminates.
28
SEE US IN BOOTH 519
PCB West Exhibitors (continued)
San Diego PCB, Inc. Screaming Circuits San-ei Kagaku Co., Ltd. SEP Co., Ltd. Booth #119
9909 Mira Mesa Blvd. Suite 250
San Diego, CA 92131
P: 858-271-5722
E: mike.creeden@sdpcb.com
sdpcb.com
San Diego PCB is a printed circuit design service providing a
virtual CAD department to utilize emerging technologies and
quickly leverage error-free data through the use of Altium, PADS,
Xpedition and Allegro to solve simple to complicated designs.
Booth #304
1999 S Bascom Ave, Suite 700
Campbell, CA 95008-2205
P: 408-879-6224
E: sales@spgventures.com
san-eikagaku.com/e_electron/
San-ei is a Japanese manufacturer of chemical materials for the
production of printed circuit boards. PHP-900 series hole fill paste
is the most widely used brand in the world. UCP gap fill paste
enhances the surface planarity of thick copper applications.
Booth #503
1140 NW 3rd Avenue Canby, OR 97013
P: 503-263-7300
E: sales@screamingcircuits.com
screamingcircuits.com
Screaming Circuits is reinventing electronics manufacturing in
North America. It’s personal manufacturing, fast, accurate, online,
and at your beck and call. We’ve built boards that have gone up
into space, down into the ocean and everywhere in between.
Booth #318
1306 Louis Way Sacramento, CA 95819
P: 877-903-5550
E: guy.martindale@sep-us.com
sep.co.kr
SEP Co., Ltd., founded in 1993, has developed into one of South
Korea’s leading privately owned printed circuit board and contract manufacturing companies.
Shenzhen Suntak Circuit
Technology Co., Ltd. Sanmina Corporation Booth #505
2700 North First Street San Jose, CA 95134
P: 408-964-3500
F: 408-964-3440
E: eva.rayas@sanmina.com
sanmina.com
We make some of the most complex and innovative optical,
electronic and mechanical products in the world. We are a technology leader, providing end-to-end design, delivering superior
quality and support to original equipment manufacturers.
Schoeller Electronics
Systems GmbH Booth #609
Marburger Str. 65 Wetter 35083
Germany
P: 952-820-5135
E: m.schumacher@se-pcb.de
schoeller-electronics.com
At our plant in Germany we produce high-tech printed circuit
boards. We are technology leaders in the areas of flex, flex-rigid,
HF, and HDI multi-layer, as well as heat management solutions.
Share
Booth #614
Henggangxia Industry Zone, Xinyu Road, Shajing Street, Baoan
District Shenzhen China
P: 0755-26068047-8842
F: 0755-26068048
E: cfzhu@suntakpcb.com
suntakpcb.com/
Shenzhen Suntak Circuit Technology Co., Ltd. is one of the
world-leading printed circuit board service enterprises.
CIRCUITS
Sierra Circuits, Inc. Booth #410
1108 West Evelyn Avenue Sunnyvale, CA 94086
P: 408-735-7137
F: 408-735-1408
E: emilym@protoexpress.com
protoexpress.com
Sierra Circuits is the leading name in printed circuit boards,
specializing in PCB manufacturing and the assembly of highdensity interconnect technology. We provide our customers with
unprecedented quality, reliability, and a single point of support.
30
Don’t Let Your
Temperatures Rise
Let ROGERS’ Thermal
Management Solutions Keep You Cool
COOLSPAN® TECA Film • 92ML™ StaCool™ Laminates • ML Series™ Laminates & Prepregs
Heat can be damaging, especially when it is not managed. That’s why Rogers Corporation
invested so much time and energy into creating an array of material-based thermal
management solutions to keep heat rise to a minimum in printed circuits. From
automotive circuits to LED modules to power supplies, ML Series laminates and prepregs
effectively conduct heat away from the source, while COOLSPAN thermally & electrically
conductive adhesive (TECA) materials enhance the thermal management of new and
existing designs. And for that extra cooling edge, 92ML StaCool laminates feature a
thermally conductive metal bottom plate to enhance the heat dissipation.
www.rogerscorp.com/acs
Don’t let your temperatures rise. Use Rogers’ thermal management solutions.
USA - AZ, tel. +1 480-961-1382
EUROPE - BELGIUM, tel. +32 9 235 3611
PCB West Exhibitors (continued)
SOMACIS Booth #618
Via Jesina 17 Castelfidardo, AN 60022
Italy
P: +39 071 721531
F: +39 071 72153242
E: info@somacis.com
somacis.com
For more than forty years, SOMACIS has been a dynamic company producing high-tech PCBs and delivering innovative solutions. SOMACIS, headquartered in Italy, is one of the leading PCB
manufacturers, with production plants in Italy, the US and China.
Tempo Automation
Booth #204
1500 Michigan Street,
San Francisco, CA 94124
P: 415-320-1261
support@tempoautomation.com
tempoautomation.com
Turnkey PCB assembly in three days. Automated factory for
low-volumes and prototypes. We’ve built a software-driven
process optimized for low volume, allowing you to cut down
development times and enjoy a seamless ordering experience.
Ticer Technologies Streamline Circuits Booth #509
1401 Martin Ave. Santa Clara, CA 95050
P: 408-727-1418
F: 408-727-8971
E: sales@streamlinecircuits.com
streamlinecircuits.com
Streamline Circuits is a leading provider of high-quality PCBs.
We are committed to providing the most advanced technology,
quality and engineering support available. These resources help
develop your product in a cost-effective and quick turn manner.
Sunshine Global PCB Group Booth #416
3400 Silverstone Drive, Suite 139
Plano, TX 75023
P: 626-422-4296
E: jimmyfang@sunshinepcb.com
sunshinepcbgroup.com
Sunshine PCB is a world-class circuit board manufacturer with
three plants: Shenzhen, Jiujiang-China, and Germany. Our capabilities include two to 36 layers, stacked microvias, low-loss,
heavy copper and rigid-flex. We have technical support offices
in TX, CA, and AZ.
Sunstone Circuits Booth #502
13626 South Freeman Road Mulino, OR 97042
P: 503-759-2196
E: mohara@sunstone.com
sunstone.com
Sunstone Circuits is the leader in PCB solutions for the design
engineer. With a 100% on-time guarantee, and live onsite
customer support every day (24/7/365), Sunstone provides
quality boards and unparalleled customer service. Visit www.
Sunstone.com.
Share
Booth #414
2555 West Fairview Street, Suite 101
Chandler, AZ 85224
P: 480-223-0891
E: dburgess@ticertechnologies.com
ticertechnologies.com
Ticer Technologies produces TCR thin film embedded resistor
copper foil, 25 to 1000 ohms per square. Designers use TCR to
increase digital and RF PWB functionality and electrical performance. Available through laminators, fabricators and Ticer.
TMS Representatives, LLC Booth #611
1401 East Thistle Landing Drive Phoenix, AZ 85048
P: 602-455-1116
E: Tom@tms-reps.com
tms-reps.com
TMS Representatives is a manufacturers’ representative, technical sales and consultation firm. We are exhibiting with our partner Wuzhu Technology, the largest privately held, high-volume
PCB manufacturer in China.
TTM Technologies, Inc. Booth #305
1665 Scenic Avenue, Suite 250 Costa Mesa, CA 92626
P: 714-327-3000
E: dpham@ttmtech.com
ttmtech.com
TTM Technologies is a worldwide leader in the manufacture
of technologically advanced PCBs, backplane and sub-system
assemblies. Our “Global Presence/Local Knowledge” approach
creates a one-stop global solution for our valued customers.
32
SEE US IN BOOTH 509
ADVANCED
PCB
S:
WE MAKE YOUR VISION A REALITY
Tuesday Lunch & Learn:
Combining Advanced Equipment
Capability with Design
Tuesday conference attendees only
Rm 209 -210
12pm - 1pm
Rigid / Rigid-Flex / Multilayer Flex
A PCB manufacturer that now supports
today’s advanced technology chip
requirements (.08 MM BGAs), while
continuing to up hold the Quality &
Reliability needed by the Commercial,
Medical, Aerospace & Military industry.
NADCAP/AS9100 rev. C/ITAR/ISO13485/Mil-Spec55110/ISO9001
Streamline Circuits • 1401 Martin Avenue, Santa Clara, CA 95050
408.727.1418 phone • 408.727.8971 fax • www.streamlinecircuits.com
PCB West Exhibitors (continued)
Westak, Inc. UP Media Group, Inc.
P: 678-817-1286
fstewart@upmediagroup.com
circuitsassembly.com
pcdandf.com
Serving the global PCB community through Printed Circuit Design &
Fab/Circuits Assembly (print/digital), pcdandf.com and circuitsassembly.com, PCB UPdate (pcbupdate.com) e-newsletter, PCB West
(pcbwest.com) conference and exhibition, and other media.
Ventec International Group Booth #411
311 South Highland Avenue Fullerton, CA 92832
P: 714-773-9621
E: OrdersCA@Ventec-USA.com
ventec-usa.com
Ventec is a leading producer of polyimide and high-reliability
epoxy laminates and prepregs, and low-Dk and low-Df materials for high-frequency SI, IMS materials for thermal management and standard, halogen-free, high-temp and high-reliability
grades of FR-4.
Victory Giant Technology
(Huizhou) Co., Ltd. Booth #617
Xing Cheng Science and Technology Park Xinqiao Town, Huiyang District
Huizhou City Guangdong 516211
China
P: +1(915)667-0655
E: clement.du@shpcb.com
shpcb.com
VGT manufactures multilayer PCBs and owns a 2.6 million sq.
ft. industry campus, including three plants, 3,200 employees,
and a monthly output capacity of more than three million
sq. ft. We serve the world’s leading OEM factories and brand
customers.
Share
Booth #302
1116 Elko Drive Sunnyvale, CA 94089
P: 408-734-8686
F: 408-734-5190
E: drhall@westak.com
westak.com
Westak is a leading manufacturer of high-reliability circuit
boards. Facilities in North America and manufacturing partners in Asia fulfill time-critical prototypes through volume requirements. ISO/AS9100, MIL-PRF-31032, ITAR, RoHS, REACH
and Bellcore.
Wurth Electronics Booth #516
410 N Boylan Ave. Suite 155
Raleigh, NC 27603
P: 919-592-2124
E: greg.vouga@we-online.com
we-online.com
Wurth Electronics has 10 factories across Europe, Asia and the
US. Our facilities in the US and Germany specialize in small to
medium volume, quick turns, and high technology. Our Asian
facilities can supply large volumes with low pricing.
ZERO DEFECTS INTERNATIONAL
Zero Defects International Booth #405
1931 O’Toole Way San Jose, CA 95131
P: 408-986-8522
E: mbrody@zdefects.com
zdefects.com
Zero Defects International is a sales and service company. We
work with printed circuit fabrication and assembly companies
and provide equipment for all phases of test and inspection. The
companies we represent have operations around the globe.
Zuken Booth #401
238 Littleton Road, Ste. 100
Westford, MA 01886
P: 978-692-4900
F: 978-692-4725
E: amy.clements@zukenusa.com
zuken.com
Design products, not just boards! Product-centric design
enables you to optimize both the product and the PCB design,
while reducing risk, speeding delivery and cutting costs. Visit us
to learn more and sign up for a test drive today!
34
PCB West Speaker Biographies
WALTER OFER ABRAMSOHN is an
experienced hardware designer with
over 20 years’ experience planning
and building boards for the hightech industry. Having managed PCB
design for companies like NetApp,
Drobo and Infineon, he has gained
valuable knowledge required for the
design of a variety of boards for the
enterprise, consumer and IC design
markets. An SI and manufacturing
specialist who knows the PCB fabrication houses and processes inside
and out, he has taken on the challenge of bringing this knowledge to
the design domain.
several major telecommunications
companies. He has a bachelor’s in
electrical engineering and an MBA
from Fairleigh Dickinson.
EDWARD B. ACHESON is a principal product engineer for Allegro
PCB products at Cadence Design
Systems, focusing on DFM, ECADMCAD (EDMD Schema), as well as
the IPC-2581 Consortium. Acheson
joined Cadence in 1990 and has
played several roles, including software developer, consulting and process services engineer. In addition to
his product engineer duties, he leads
the technical working group in the
IPC-2581 Consortium. Prior to Cadence, Acheson was one of the first
ECAD users at Wang Labs.
TODD BAGGETT is executive vice
president of Integrated Services at
Creation Technologies. He has more
than 25 years’ experience in printed
circuit board assembly operations and
management, including more than 13
years heading sales and marketing
operations at Creation Technologies,
Fabrinet and Epic Technologies, plus
five years as a business unit director
at Jabil and 10 years as a commodity
manager at General Motors. He has
a bachelor’s in supply chain management from Michigan State University.
FARID S. ANANI is consulting manager, Valor PCB DFx and Manufacturing Solutions, for the Consulting Division at Mentor Graphics. He works
with contract manufacturers and
OEMs to improve efficiency and help
define cost, quality and productivity improvement solutions in design
quality, design to manufacturing,
manufacturing engineering and production. He joined Mentor Graphics
in 2013. Prior to that, he worked in
contract electronics manufacturing
since 1990 and led several initiatives
resulting in real improvements in
quality and throughput. He holds a
master’s in electrical engineering and
an MBA. He has been an active member in SMTA since 2010.
CRAIG ARMENTI is senior technical
marketing manager for PCB products at Zuken. Over his 30-year career, he has held application support
and management positions with
Share
AMIT BAHL is director of sales and
marketing at Sierra Express, a PCB
manufacturer and assembler in
Sunnyvale, CA. Prior to Sierra Circuits, he was a consultant to the Global Services Team at IBM from 2003 to
2005, where he was instrumental in
automating and optimizing business
processes using the latest information technologies. Bahl holds a bachelor’s in computer science from UCLA.
MARITA BALDWIN is a member of
the consulting staff at Cadence Design Systems. Prior to that, she was
applications engineering manager for
seven years with Intel.
DANIEL BEEKER is senior member
of the technical staff at NXP Semiconductor. With more than 39 years
of experience in electronic system
design and EMC, he provides applications support for NXP customers
worldwide. He also supports NXP
customers globally with special function development tools and instrumentation (almost all of the “LFxxx”
tools on the NXP website). Beeker
also specializes in EMC and signal integrity design techniques for systems
and PCBs, especially in low layer
count designs, and is involved with IC
package design and IC development
tool teams to support improved EMC
performance. He teaches field-based
design techniques at Freescale and industry conferences worldwide. DR. ERIC BOGATIN is currently dean
of the Teledyne LeCroy Signal Integrity Academy and adjunct professor
at the University of Colorado - Boulder in the ECEE dept. He has held
senior engineering and management
positions at Bell Labs, Raychem, Sun
Microsystems, Ansoft and Interconnect Devices. He has written six
technical books in the field and presented classes and lectures on signal
integrity worldwide. In 2011, Bogatin
Enterprises, which he founded with
his wife Susan in 1990, was acquired
by Teledyne LeCroy. After concluding
his live public classes in 2013, he devoted his efforts to creating the Signal Integrity Academy, a web portal
to provide all his classes and training
content online for individuals and
companies. He received a bachelor’s
in physics from MIT and master’s and
doctoral degrees in physics from the
University of Arizona.
RALF BRÜNING is product manager
and senior consultant at the Zuken
EMC Technology Centre. He holds
degrees in computer science, electrical engineering and economics
from the University of Paderborn.
He is a member of the IBIS Open
Forum and is a work-package leader
for eMobility electronic design and
simulation issues for the CATRENE
research project.
MICHAEL CATRAMBONE is principal
product engineer at Cadence Design
Systems, where he has worked for
nearly four years. Prior to that, he
held senior PCB designer positions
at Plexus, Northrop Grumman, US
Robotics and ASI, and for nearly 13
years was distinguished engineer,
PCB/mechanical at UTStarcom.
KEVEN COATES is a development
engineer at Geospace Technologies
where he works designing wireless
seismic recording devices, concentrating on embedded processors,
battery safety, and battery management. He spent the previous 20 years
working forTexas Instruments specializing in high-speed PCB layout/signal
integrity, BGA layout, thermal issues,
and PCB-friendly BGA packaging
36
After 25 years, PCB design
has finally changed...
The difference?
3D multi-board, product-centric design
Join us at booth 401 for live technical
sessions and demonstrations
throughout the day:
11:00 am:
3D multi-board design with
integrated MCAD.
1:00 pm:
3D multi-board flex bending
and checking.
2:00 pm:
Concurrent multi-user PCB design
and advanced routing techniques.
3:00 pm:
Modular design basics.
4:00 pm:
EMC checking for PCB designers.
#GetToKnowZuken
zuken.com/cr-8000
PCB West Speaker Biographies (continued)
for consumer and automotive applications. He holds a bachelor’s from
Texas A&M University.
JOHN COONROD is a market development engineer for Rogers Corp.,
Advanced Circuit Materials Division.
He has been involved with the printed
circuit board industry for 25 years, and
has worked in multiple engineering
positions related to flexible, rigid and
high-frequency PCBs. Coonrod holds
a bachelor’s in electrical engineering
from Arizona State University.
MARK H. CRAWFORD is a trade and
industry analyst at the US Department of Commerce, Bureau of Industry and Security, Office of Technology
Evaluation. He works with a team
of analysts that produce specialized
industrial assessments on a range
of topics, including the electronics,
space industry supply chains, strategic materials, textiles, foreign dependency in health care products, and
information security practices.
RYAN CURRY is technical account
manager at Akrometrix, and also has
11 years’ experience as a test and
applications engineer. He is a subject matter expert in at temperature
warpage and strain measurement
techniques. He has a bachelor’s in
mechanical engineering from the
Georgia Institute of Technology.
ARMANDO ESAÚ LEAL DÍAZ has
a bachelor’s in materials engineering and a master’s from the Universidad Autónoma de Nuevo León,
where his thesis was “Heat Transfer
Simulation of the FR-4 Printed Circuit Board during Reflow Process.”
He is currently working on a Ph.D.
in materials engineering.
TODD DIERKING is director of design
services for CreationTechnologies. Dierking has more than 15 years of engineering and operations leadership
experience in contract design and
electronics manufacturing services.
He has a bachelor’s degree in electrical and computer engineering from
the University of Colorado at Boulder.
Share
VINCENT DI LELLO, CID+, has designed PCBs ranging from the Pebble
Watch to boards that have gone into
space and inside Vegas machines. He
is senior principal product engineer
at Cadence Design Systems, making
designers lives easier by influencing
software development.
support and sales management. In
1998 he founded Circuit Innovations,
a successful manufacturers’ rep firm
representing the Tyco Printed Circuit
Group. He now focuses his efforts
on technical sales and new market
development as national sales manager for SOMACIS Inc.
GEORGE DUDNIKOV is senior vice
president, CTO and chief marketing
officer at Founder PCB. He has over 30
years’ experience in PCBs, 14 as CTO
of Sanmina-SCI. His background is in
both R&D and high-volume manufacturing managing global enterprises.
He has a bachelor’s in mechanical engineering from Columbia.
JOE FJELSTAD has more than 35
GARY FERRARI is director of technical support, Firan Technology Group.
He has 35 years’ experience in electronics packaging and has held senior
operations, quality and engineering
positions, most recently as executive director and cofounder of the IPC
Designers Council. He chaired the
IPC Technical Activities Executive
Committee, provided DfM consulting services, and spearheaded IPC’s
PWB Designer Certification Program.
He was inducted into the IPC Hall of
Fame in 2015.
SCOTT FILLEBROWN is chief technology officer at Libra Industries, a multisite EMS company. Previously, he
was president and CEO of ACD, a PCB
design and EMS company, where
he was from 1995 until its purchase
by Libra in 2016. He graduated from
the University of Texas - Dallas with a
bachelor’s in business administration,
with a concentration in marketing.
MARK FINSTAD has more than 30
years’ experience building and designing flex circuits. He coauthors the
“Ask the Flexperts” column in Printed
Circuit Design & Fab magazine, and is currently a senior application engineer
with Flexible Circuit Technologies.
BRYAN FISH has been involved in
the printed circuit board industry
for over 30 years, holding positions
within production management,
plant management, engineering
years of international experience
in electronic interconnection and
packaging technology in a variety of
capacities from chemist to process
engineer and from international
consultant to CEO. Currently founder
and president of Verdant Electronics,
Fjelstad is also a well-known author
and magazine columnist writing on
the subject of electronic interconnection technologies. Prior to founding Verdant, Fjelstad cofounded SiliconPipe a leader in the development
of high speed interconnection technologies. He was also formerly with
Tessera Technologies, where he was
appointed to the first corporate fellowship for his innovations.
RAY FUGITT has nearly 30 years’
experience in EDA, 15 in PCB manufacturing (HAL, dry film, AOI, and
electrical test). He was a CAM supervisor at Hadco Tech Center 2. Fugitt
joined ACT in 2000 to support the
CAM350 product line. He now supports CAM350 and BluePrint products in a technical sales role with
DownStream Technologies.
TIM HAAG is customer support and
training manager and senior application specialist at Intercept Technology,
where he has spent the past 12 years.
Prior to that, he was design group
manager at Stilwell Baker and engineering services manager at inFocus.
ROBERT HANSON has more than
40 years’ experience in design,
manufacturing and testing. He has
bachelor’s degrees in industrial engineering and business administration, and a master’s in electrical engineering. Hanson has been a digital
design engineer at Boeing, Rockwell,
Honeywell and Loral.
38
CONFERENCE: September 12 – 14, 2017
EXHIBITION: Wednesday, September 13
Santa Clara Convention Center, CA
pcbwest.com
PCB West Speaker Biographies (continued)
BILL HARGIN is director of North
American Marketing for Nan Ya Plastic’s PCB laminate division in Taiwan.
He has 15 years’ experience in PCB
signal integrity, previously serving as
product manager for Mentor Graphics’ HyperLynx SI software. Hargin
has spent much of the last three years
focused on stackup, PDN design and
PCB materials selection.
RICK HARTLEY is the principal of
RHartley Enterprises, through which
he consults and teaches internationally to resolve noise, signal integrity
and EMI problems. Rick’s focus is on
correct design of PCBs to prevent and/
or solve problems. He has consulted
with major corporations in the US,
Australia, Brazil, Canada, China, Denmark, England, France, Germany, Japan, Mexico, New Zealand and Spain.
His design career has focused on circuits and PC boards for computers,
aircraft avionics and telecommunications. His consulting efforts have also
focused on the automotive and appliance spaces. He has a degree in engineering from Ohio Technical Institute
and 51 years of experience. He has
dedicated the past 40 years to PCB
and circuit development with emphasis on control of noise, in digital, analog and RF circuits. He is a member of
the IPC Designers Council Executive
Board, a past national chairman of the
IPC Designers Council and past member of the Editorial Review Board of
Printed Circuit Design magazine. He
has written numerous technical papers and articles on methods to control noise, EMI and signal integrity.
HAPPY HOLDEN is the retired chief
technical officer for Hon Hai Precision
Industries (Foxconn). Prior to Foxconn, he was senior PCB technologist
for Mentor Graphics and advanced
technology manager at Nan Ya/
Westwood Associates and Merix. He
previously worked at Hewlett-Packard
for 28 years as director of PCB R&D,
application mgr. for Asia-Pacific, PCB
design services manager and manufacturing (PCB) engineering manager.
He has been involved in advanced
PCB technologies for 45 years.
Share
DAVE HOOVER is field application
engineer at TTM Technologies, where
he has worked since 2011. He has 25
years’ experience in printed circuit
board fabrication and development
of HDI, microvias and other leading
technologies at such companies as
Hadco, Sanmina, Data Circuit, Multek
and Cisco.
NEIL HUBBLE is director of engineering at Akrometrix, after almost
10 years as an application engineer.
He is a subject matter expert in temperature warpage measurement
techniques. His primary responsibility is leading NPI and engineering efforts. He has a degree in mechanical
engineering from the Georgia Institute of Technology.
ZULKI KHAN is founder and president of NexLogic Technologies, a
San Jose, CA, EMS provider. Prior to
NexLogic, he was general manager
for Imagineering Inc. He has also
worked on high-speed PCB designs
with signal integrity analysis. He
holds a bachelor’s in electrical engineering from N.E.D. University and
an MBA from the University of Iowa
and is a frequent contributor to EMS
industry publications.
NICK KOOP has 30 years of experience
in the flexible circuit industry. He is
senior field applications engineer for
TTM Technologies and has developed
PCB technologies to support medical,
military, and global security applications. Koop holds a master’s in management of technology and a bachelor’s in mechanical engineering from
the University of Minnesota. He is the
chairman of the IPC Flexible Circuits
Committee and co-chair for the IPC
6013 Qualification and Performance
Specification for Flexible Printed
Boards Subcommittee.
STEVE MCEUEN is vice president of
global procurement for Creation Technologies. McEuen has held leadership
roles in the EMS industry and in more
than two decades in the automotive
sector. He has a master’s in engineering management from Wayne State
University and a bachelor’s in electrical
engineering and computer science
from the University of Colorado.
PATRICK MCGOFF is market development manager at Mentor Graphics.
He previously held various sales and
sales management positions at Valor,
including vice president design market, and vice president of sales both
in North America and China. Prior
to joining Valor, McGoff was Eastern
regional sales manager for Gerber
Scientific, and later managed North
American sales for Frontline PCB Solutions. McGoff has a bachelor’s in
business administration (marketing)
from Georgia State University.
GEORGE MILAD is national accounts manager for technology at
Uyemura, for which he has worked
for nearly 20 years. He has 30 years’
experience in PCB fabrication and
plating technology. He is chair of the
IPC Plating Committee.
RANDALL MYERS is a technical marketing engineer at Mentor
Graphics. He has been involved
with PCB design and electrical
engineering for more than 15 years
at various OEMs and service bureaus. He has master’s degrees in
electrical engineering for computer
architecture and computer engineering from the University of Colorado.
DON ALAN NOVOTNY joined Intrinsiq Materials in 2015. He manages
Intrinsiq Materials’ business development for North America. He contributes to the customers’ design
direction for markets such as PCBs,
semiconductor packaging, touch displays, antennas and novel 3D printed
electronic modules. He has over 20
years’ experience developing electronics for aerospace, military, wireless, test equipment and commercial
industries. He has held electrical design, chief engineer, program manager and vice president positions and
holds US and international patents.
He has an electrical engineering degree from the University of Illinois
and has an MBA from the University of Southern California, where he
studied quantum electronics.
40
The World’s Best Electronics Design-to-Assembly Technical Magazine
PRINTED CIRCUIT DESIGN & FAB / CIRCUITS ASSEMBLY
offers cutting-edge and tutorial information on PCB design,
fabrication and assembly in each issue. It's the world's
only source for end-to-end electronics supply chain
technical information!
Subscribe to the digital version for FREE online at
circuitsassembly.com or pcdandf.com
Follow us on Twitter @MikeBuetow and @FrancesStewart5
Visit www.pcbwest.com for information about our conference and trade show
for PCB engineers, designers, fabricators and assemblers
PCB West Speaker Biographies (continued)
V RAM is senior technical marketing
engineer at Mentor Graphics.
HEMANT SHAH has been with Cadence SPB division since 2000,
most recently as product management group director – Allegro PCB &
FPGA products. Previously, he was
engineering director for advanced
development at Xynetix Design Systems, where he also held a product
marketing director role. He holds a
bachelor’s in electrical engineering
and a master’s in computer science.
JULIE SILK is an environmental
compliance program manager at
Keysight Technologies. She manages the transition of Keysight products to EU RoHS compliance, materials reliability investigations, plus
Keysight’s engagements with electronics manufacturing and reliability consortia. She has an interest
and experience with printed circuit
design, assembly and reliability,
failure analysis, contract manufacturer relationship management and
sustainable manufacturing.
VERN SOLBERG is a technical consultant specializing in SMT, microelectronics design and manufacturing technology. He has served the
electronics industry for more than 25
years in areas related to both commercial and aerospace electronic
product development and is active
as an author and educator. Solberg
holds several patents for IC packaging innovations, including the multiple die and folded-flex 3D package
technology, and is author of Design
Guidelines for Surface Mount and
Fine-Pitch Technology. Solberg has
been involved with training students
and faculty members at the University of Wisconsin-Milwaukee School
of Engineering and Kansas State
University’s Microelectronic Laboratory in Salina. He chairs or otherwise
participates in task groups for several
industry organizations, including IPC,
SMTA, IEEE and IMAPS.
MARK THOMPSON is an engineer
at Prototron Circuits, with over
Share
37 years in PCB fabrication, more
than half with Prototon. He writes
a semimonthly column on fabrication issues for an online electronics
industry magazine. He also manages Prototron’s LinkedIn “PCB
Bare Board Truth” group, a group
devoted to networking solutions for
today’s PCB fabrication issues.
UMUT TOSUN is application technology manager at Zestron. He has
published numerous technical articles in leading electronics manufacturing magazines, including Circuits
Assembly. As an active member of the
SMTA and IPC, Tosun has authored
and presented numerous technical
papers and studies at the industry’s
largest trade shows, such as IPC
Apex and SMTAI. He holds bachelor’s and master’s degrees in chemical engineering from the Technical
University of Hamburg, Germany.
He joined Zestron in 2000.
PER VIKLUND is director of RF and
Advanced Packaging in Mentor
Graphics Systems Design Division,
responsible for IC packaging, RF
design and embedded component
product lines. He is a longtime IEEE
and IMAPS member, with more
than 25 years’ experience in electronics design and has spent the
past 20 years designing advanced
EDA tools. He has published several
papers on IC packaging, embedded
passives, RF and high-speed design.
Prior to joining Mentor, he was chief
technical manager of DDE-EDA for
more than 10 years.
has been a columnist for Printed Circuit Design & Fab magazine. She is a
member of the IPC Designers Council Executive Board and a member
of its education committee.
DAVID WIENS is business development manager, System Design Division at Mentor Graphics, where
he joined in 1999 through the acquisition of VeriBest. Over the past
25 years, he has held various engineering, marketing and management positions within the EDA
industry. His focus areas have included advanced packaging, highspeed design, routing technology
and integrated systems design. He
holds a bachelor’s in computer science from the University of Kansas.
JÜRGEN WOLF studied at the University of Freiburg/Germany and
obtained his degree in microsystem
technologies in 2004. After graduation, he worked at the Institute of
Microsystem Technologies (IMTEK)
in Freiburg/Germany as scientific
assistant before becoming involved
with work on reliability of MEMSbased inertial sensors in the corporate research group of Robert Bosch
in 2005. In 2008 he started working
as project engineer for the Research
and Development – Circuit Board
Technologies department of Würth
Elektronik in Germany, becoming
assistant manager, research and
development in 2012. Since 2015 he
has headed product management
for embedding components into
printed circuit boards.
HANNES VORABERGER has been
group manager R&D at AT&S for
more than five years. He has been
with AT&S for 12 years, and has
a doctoral degree in engineering
from Technische Universität Graz.
SUSY WEBB is a senior PCB designer with 34 years’ experience. Her
career includes point-to-point microwave network systems, oceanographic oil exploration equipment,
and CPCI and ATX computer motherboards. She is CID certified and
42
The CIRCUITS ASSEMBLY
DIRECTORY OF EMS COMPANIES
• Build your EMS database
• 2,900+ facilities worldwide
• Sortable in Excel
• Unrestricted use
• Includes contact info, no. of lines,
markets served and more!
circuitsassembly.com/dems
SHOW
SPECIAL
$500
AD INDEX
Company
Page No.
Accurate Circuit Engineering, ace-pcb.com. . . . . . . . . 9
Accutrace, PCB4u.com. . . . . . . . . . . . . . . . . . . . . . . . 13
Altium, altium.com . . . . . . . . . . . . . . . . . . . . . . . . . 1, C3
Beta Layout, pcb-pool.com. . . . . . . . . . . . . . . . . . . . . 15
EMA, go.ema-eda.com/OrCAD-Rigid-Flex. . . . . . . . . . . 17
Freedom CAD, freedomcad.com . . . . . . . . . . . . . . . . . 19
Mentor Graphics, mentor.com/pcb ; pads.com. . . . . . 21
NexLogic, nexlogic.com/pcbwest. . . . . . . . . . . . . . . . . 23
Get
your
dose
of PCB industry news and views.
Subscribe to PCB UPdate
www.pcbupdate.com
The e-mail newsletter filled with
news and resources for PCB design,
fab and assembly professionals
Ojin, ojin.ca. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
PCB West 2017, pcbwest.com. . . . . . . . . . . . . . . . . . . 39
Polar Instruments, polarinstruments.com . . . . . . . . . 27
Prototron Circuits, prototron.com. . . . . . . . . . . . . . . . 29
Rogers, rogerscorp.com/acs . . . . . . . . . . . . . . . . . . . . 31
Sierra Circuits, protoexpress.com ; protoexpress.com/quickturn.C2, C4
Streamline Circuits, streamlinecircuits.com. . . . . . 7, 33
Ventec, venteclaminates.com. . . . . . . . . . . . . . . . . . . 35
Zuken, zuken.com/cr-8000 . . . . . . . . . . . . . . . . . . . . . 37
The advertising index is published as an additional service. The
publisher does not assume
any liability for errors or omissions.
Advertising Sales
Frances Stewart, 678-817-1286, fstewart@upmediagroup.com
Share
44
It’s 5 O’Clock at PCBWest
Drinks Are on Us!
FREE DRINK TICKET AT
Let’s Talk About the
Future of Electronics.
BOOTH
314
See link for commercial : www.protoexpress.com/quickturn
Turnkey assembled PCBs
Quickturn in five days or less
SEE US IN BOOTH 410
Reliable. Quality. Quickturn.
Technology on Time
C I RC U I T S
1108 West Evelyn Avenue Sunnyvale, California 94086
www.protoexpress.com