1
WELCOME
Wiedmann Brothers Hardware was originally founded in 1906 by
Jakob Wiedmann in Venturia, North Dakota as a “Bazaar” for local
homesteads and farmers. From flour, feed and tackle, hunting
supplies to implements; whatever you needed you could find it
there.
Phone: 1.877 934.2444
Fax:1.877 828.4448
Address:
7411 Laurel Canyon Blvd., Unit 3
Los Angeles, CA 91605
Office Hours: 7:30am - 4:30pm PST
Wiedmann Bros. began as a “spin off” of Firebird Fiberglass,
manufacturer of the highest quality tractor canopies since 1983
and is owned by my father, Jim Wiedmann. Our goal was to
supply our existing dealers with complimentary aftermarket
products from other quality manufacturers. In 2006, on the
100th anniversary of the original hardware store, Wiedmann
Bros. Distributing Co., LLC was formally formed. Six years later,
we’re proud to announce our marketing alliance with Kubota
Tractor Corporation.
Like the original bazaar support of homesteaders, our goal is to
support the Kubota ag, turf, construction and rural lifestyle
dealers with the highest quality aftermarket accessories, at a fair
price with excellent customer service.
We’re grateful for your business and look forward to serving you!
Disclaimer:
Matt Wiedmann
President
This catalog is intended for Kubota Franchised Dealers only. All products offered are strictly aftermarket items,
from a variety of manufacturers. No products have been tested by, approved by, or recommended by Kubota
Tractor Company nor by Wiedmann Bros. Distributing Co.. Please review our terms and conditions or give us a
call if you have any questions.
This catalog, and the website OrangeAftermarket.com, is fully operated independently by Wiedmann Bros.
Distributing Co., LLC.
2
WELCOME
RTV ........................................6
Attachments - General........................6-7
Audio......................................................8
Bed Accessories....................................9-10
Cabs & Enclosures................................11-13
Canopies................................................14
Engine & Performance........................15
Fire & Rescue.........................................16-17
Floormats..............................................18
Heat & Air...............................................18
Hunting Gear........................................19-22
Implements & Mowers........................23-25
Lights......................................................26
Mirrors....................................................27
Racks......................................................27-28
Ramps....................................................29
Seat Covers............................................29
Tires & Wheels.......................................30-31
Winch & Recovery................................32-33
Windshields...........................................34-35
TRACTORS .............................37
Audio......................................................37
Canopies................................................37-38
Cabs & Enclosures................................39-40
Storage Covers.....................................41
MOWERS ...............................42
CONSTRUCTION .....................44
Visit our website to explore all ways you can customize
a new Kubota RTV utility vehicle, tractor, mower or
construction equipment.
»
»
»
»
»
Place Orders
View Order History
Download Up-To-Date Product Manuals
Track UPS & FedEx Shipments
Get Online Only Discounts & Promotions!!
Login Information:
User Email: _________________________
Password: _________________________
877.934.2444
3
RTVS
ATTACHMENTS
Ratcheting Rhino Grips
Rhino Grip XL RTV Mount
Manufactured by: Kolpin
Manufactured by: Kolpin
Manufactured by: Kolpin
»
»
»
»
»
»
»
»
»
6
Ratcheting design allows for securing items
from 1-4 inch diameter
Kwik Clip design for on/off rotational in field
adjustments
Quick release button opens the grip quickly for
easy access to gear
Window Mount Suction Cup Grips
Mounts directly to RTV roll bar
360 rotation for every need
180 tilt feature (45 increments)
Sold as a pair
Off-set mounting to maximize rack space
Rubber securing straps
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Ratcheting Rhino Grips
KP-21540
Rhino Grip XL RTV Mount
KP-21535
Window Mount Suction Cup Grips
KP-21520
UTV Grab/Sport Handles
Saddle Storage Box
Crossover Tool Box
Manufactured by: Kolpin
Manufactured by: Kolpin
Manufactured by: Vertically Driven Products
»
»
»
»
»
»
»
»
Easy installation to inside bed rails of your RTV
Available as a pair or single
Dimensions: 26.875” l x 4.875” w x 14.75” h (each)
Bed Dimensions: 43.75” min x 54” max
Lockable gull wing doors
Scissors-type locking strut hold lids
open for convenient access
Easy in and out access to your RTV
Heavy-duty neoprene construction
DESCRIPTION
PART NO.
Saddle Storage Box - single
KP-4408
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Saddle Storage Box - pair
KP-4407
Crossover Tool Box
KP-2691
UTV Grab/Sport Handles
VDP-50769315
RTVS
ATTACHMENTS
Saw Press
Saw Boot
Boottector Bracket
Manufactured by: Kolpin
Manufactured by: Kolpin
Manufactured by: Kolpin
»
»
»
»
»
»
»
»
»
»
»
Safely transports chainsaw
Fits chainsaws with up to 24” bar
Tough rubber pads cushion powerhead
Adjusts up to 45 degrees
Secure and protect your chain saw to your RTV
Accommodates saw bars up to 20”
Requires Boottector Bracket
Mounts to nearly all steel bed rails
Lightweight and durable
Adjusts without the use of any tools
Fits Gun Boot® IV and Gun Boot® 6.0 cases only!
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Saw Press
KP-20044
Saw Boot
KP-20600
Boottector Bracket
KP-20035
Fuel Pack Jr. with Bracket
Fuel Pack Jr. with Pack Mount
Manufactured by: Kolpin
Manufactured by: Kolpin
Manufactured by: Kolpin
»
»
»
»
»
Puncture resistant, crush proof, high-density
polyethylene
1.5 gallon capacity
»
Puncture resistant, crush proof, high-density
polyethylene
1.5 gallon capacity
4 Gallon Fuel Pack
High-density polyethylene, legal in all 50 states
Mount using 4 included 1” wide Velcro straps
or mount using 2 optional pack mounts (SOLD
SEPARATELY)
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Fuel Pack Jr. w/ Bracket
KP-89735
Fuel Pack Jr. w/ Pack Mount
KP-89195
4 Gallon Fuel Pack
KP-89135
Pack Mount (single)
KP-89435
877.934.2444
7
RTVS
AUDIO
Amplified Sound Wedge
Manufactured by: Vertically Driven Products
»
»
»
»
»
»
(iPod/MP3 player not
included)
Powerful 100 watt built in amplifier
12’ Aux cable works with any iPod/
MP3
12’ power cord plugs into 12 volt plug
(2) marine grade 6.5” woofers/midrange speakers and (2) tweeters
Mounts to any roof, or 1.5” - 2” roll
bars
Separate docking station for iPod/
MP3
DESCRIPTION
PART NO.
Amplified Sound Wedge
VDP-4035A
Roll Bar Mount
FREE
Docking Station
TO
TO
12V
Roof Mount
Amplified Sound Bar
FREE
Docking Station
Manufactured by: Vertically Driven Products
(iPod/MP3 player not
included)
»
»
»
»
»
Powerful 200 watt, 6 speaker sound bar
12’ Aux cable works with any iPod/MP3
12’ power cord plugs into 12 volt source
Marine grade speakers: (2) 6” woofers
(2) 2” mid-range, and (2) 1” tweeters
Easy to install!
DESCRIPTION
PART NO.
Amplified Sound Bar - Bracket Sold
Separate
VDP-792501RCA
RTV900 Sound Bar Bracket ONLY
VDP-792541B
TO
TO
12V
Roof Mount Audio Console
Manufactured by: Tractor Tunes
»
»
»
»
»
Fits: Any RTV or tractor with a hard roof
8
Marine waterproof retractable
cover protects the DEH Pioneer
CD Player
MP3/WMA/MAV playback with
volumen and memory settings
Connect your portable devices
directly through the front AUX
input
High intensity domelight
Includes a high quality AM/FM
antenna.
»
Marine speakers are
water, UV, and corrosion
resistant and have a one
piece molded grill for
speaker protection and
durability.
DESCRIPTION
PART NO.
Roof Mount Audio Console - Standard (Black)
TT-RMT
Roof Mount Audio Console - Dome Light (Black)
TT-RMTTD
Roof Mount Audio Console - Dome Light (Camo)
TT-RMTTC
RTV500 Bracket Kit
TT-RMTRTV500
RTV900 Bracket Kit
TT-RMTRTV900
RTV1140 Bracket Kit
TT-RMTRTV1140
RTVS
BEDACCESSORIES
Diamond Plate Aluminum Bed Cover
Fits: RTV500, RTV900, RTV1100
Manufactured by: DiamondBack UTV
»
»
»
»
»
»
»
»
Total security for your Kubota RTV cargo box
Locks BOTH the cover and the tailgate with one keyed lock
Designed so that the large door panel can be removed in seconds,
providing you full use of your bed for any hauling situation
Haul up to 250 lbs. ON TOP
.063” diamond plate aluminum
Stainless steel exterior hardware
Keep weather out with the 3/4” neoprene gasket
5356 alloy TIG welds
Black LINE-X finish provides
superior anti-slip finish
for ultimate traction and
control!
Your choice of Polished Aluminum or Line-X coating!
Polished Aluminum
VEHICLE TYPE
PART NO.
RTV500 - Polished Aluminum
DB-KR508C
RTV500 - Black Line-X Coating
DB-KR508CX
RTV900/1100 - Polished Aluminum
DB-KR908CL
RTV900/1100 - Black Line-X Coating
DB-KR908CLX
RTV1140
**not available**
Black Line-X Coating
Vinyl UTV Bed Cover
Fits: RTV500, RTV900, RTV1100, RTV1140
Manufactured by: Greene Mountain Outdoors
»
»
»
»
Made from 500 denier waterproof Cordura
Use Velcro around the outer edge to attach to cargo box with supplied
adhesive Velcro and clips
Tailgate can be raised and lowered without removing cover.
NOTE: Items in black are made of 40 ounce Tonneau-Tex Vinyl
Available in 2 colors!
Black
Please specify when ordering
Mossy Oak Break Up
VEHICLE TYPE
PART NO.
RTV500
GM-KUB500BC
RTV900/RTV1100
GM-KUBBC
RTV1140
GM-KUB1140BC
Bed Lift Kit
Fits: RTV500
Manufactured by: SFS Specialties
»
»
Do-it-yourself bed lift kit
Comes with all the hardware and easy
instructions for installation
DESCRIPTION
PART NO.
RTV500 Bed Lift Kit
SF-K51001
877.934.2444
9
RTVS
Utility Bed
Fits: RTV900 & RTV1100
Manufactured by: Nalco Utility
Perfect for any need - golf courses, factories, airports, lawn and
maintenance services, stable, farms, hunting and other forms of
recreation. Easy-tilt powder-coated all steel bed with weather-tight
lids and stainless steel locks, and heavy steel hinges allowing bed to
dump.
»
Powder coated 18-gauge steel construction
»
Heavy Steel hinges allowing hydraulic or manual dump
»
Stainless steel lid lock with keys
»
Overall Size: 54” W x 57” L
»
29” x 57” bulk area; 2 compartments with gas shocks standard on lids
»
Easily replaces existing bed
DESCRIPTION
PART NO.
RTV Utility Bed
Call for Item #
Storage Box
Fits: RTV900
Manufactured by: Nalco Utility
»
»
10
Gas spring cylinders on the rear door with a keyed lock
All steel construction with powder coat paint
DESCRIPTION
PART NO.
RTV900 Storage Box
Call for Item #
RTVS
CABS&ENCLOSURES
Complete Cab Enclosure with Vinyl Windshield
Fits: RTV500 & RTV900
Manufactured by: Various manufacturers
»
»
»
»
»
»
Constructed of professional grade marine textile
Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant
Windows are constructed out of durable Aquaview vinyl
Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a
custom fit
Full Length double pull YKK zippers, complete with self adhesive Velcro for a hassle
free installation!
Doors roll back for complete ventilation and entry/exit!
VEHICLE TYPE
PART NO.
RTV500
Call for Item #
RTV900
Call for Item #
RTV1140
Call for Item #
Cab Enclosure with Lexan Windshield
Fits: RTV500, RTV900, & RTV1140
Manufactured by: Various manufacturers
»
»
»
»
»
»
»
Constructed of professional grade marine textile
Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant
Soft doors and rear window are constructed out of durable Aquaview Vinyl
Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a
custom fit
Roll away doors provide the option of taking your doors with you to conveniently stow
away when not in use.
Aero-Vent sliding vent option available to allow maximum airflow to your cab.
1/4” Lexan windshield with sliding vent included!
VEHICLE TYPE
PART NO.
RTV500
Call for Item #
RTV900
Call for Item #
RTV1140
Call for Item #
877.934.2444
11
RTVS
Windbreak Cab with Hinged Doors
Fits: RTV500 & RTV900
Manufactured by: Original Tractor Cab
»
»
»
»
»
No holes to drill
Hinged doors for quick entry/exit
Installation is made quick and simple with illustrated instructions
16 gauge steel tube frames covered with stop rip vinyl fabric
Front and rear window made of shatter resistant lexan
VEHICLE TYPE
PART NO.
RTV500 Windbreak Cab with Hinged Doors
OT-60275
RTV900 Windbreak Cab with Hinged Doors
OT-60117
HEATERS
PAGE 18
12
RTVS
Cab Enclosure Less Windshield
Fits: RTV500 , RTV900, and RTV1140
Designed to fit with
Kubota Factory
windshield
Manufactured by: Various manufacturers
»
»
»
»
Constructed of professional grade marine textile
Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion
resistant
Soft doors and rear window are constructed out of durable Aquaview vinyl
Self-adhesive Velcro & strong rare-earth magnets combines to provide you
with a custom fit
VEHICLE TYPE
PART NO.
RTV500
Call for Item #
RTV900
Call for Item #
RTV1140
Call for Item #
Side Door & Rear Window Kit
Fits: RTV500 & RTV900
Manufactured by: Various manufacturers
»
»
»
»
Constructed of professional grade marine textile
Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion
resistant
Soft doors and rear window are constructed out of durable Aquaview vinyl
Self-adhesive Velcro & strong rare-earth magnets combines to provide you
with a custom fit
VEHICLE TYPE
PART NO.
RTV500
Call for Item #
RTV900 with Glass Windshield
Call for Item #
RTV900 with Lexan Windshield
Call for Item #
MOST
POPULAR
877.934.2444
13
RTVS
CANOPIES
Fabric Sunshade Kit
Fits: RTV500, RTV900, RTV1140
Manufactured by: Various manufacturers
»
»
»
Constructed of professional grade marine textile
Waterproof, puncture resistant, tear resistant, and
abrasion resistant
Complete with self-adhesive velcro
VEHICLE TYPE
PART NO.
RTV500
Call for Item #
RTV900
Call for Item #
RTV1140
Call for Item #
Fabric Sunshade & Rear Panel
Fits: RTV500 & RTV900
Manufactured by: Seizmik
»
»
»
Durable ‘rip-stop’ nylon with clear vinyl rear window for maximum
visibility
Integrated rear panels prevent dust from kicking back into cab
Zip open rear window straps out of the way for ventilation
VEHICLE TYPE
PART NO.
RTV500
SM-18049
RTV900 (shown)
SM-18046
RTV1140
**not available**
Diamond Plate Canopy
Fits: RTV500, RTV900, RTV1140
Manufactured by: DiamondBack UTV
»
»
»
»
»
»
Durable metal UTV roof that won’t crack like plastic
Includes a rain gutter on the roof that adds significant weather protection by helping
to keep rain off your lap while riding
Ability to use it as a platform! Stand on it to get a better view, to hunt, or simply reach
those hard-to-reach work areas.
Stainless steel hardware
Doesn’t shake or rattle.
Not FOPS approved
VEHICLE TYPE
PART NO.
RTV500 - Polished Tread-Brite Aluminum
DB-KR508R
RTV500 - Tread-Brite Aluminum with Line-X Coating
DB-KR508RX
RTV500 - Smooth Plate Aluminum with Line-X Coating
DB-KR508RSX
RTV900 - Polished Tread-Brite Aluminum
DB-KR908R
RTV900 - Tread-Brite Aluminum with Line-X Coating
DB-KR908RX
RTV900 - Smooth Plate Aluminum with Line-X Coating
DB-KR908RSX
RTV1140 - Polished Tread-Brite Aluminum
DB-KR108RC
RTV1140 - Tread-Brite Aluminum with Line-X Coating
DB-KR108RCX
RTV1140 - Smooth Plate Aluminum with Line-X Coating
DB-KR108RCSX
Tread-Brite Aluminum
with Line-X Coating
Polished Tread-Brite
Aluminum
Smooth Plate Aluminum
with Line-X Coating
Fiberglass Canopy - Orange
Fits: RTV500, RTV900, RTV1140
Manufactured by: Firebird Fiberglass
»
»
»
14
Fiberglass construction with high gloss gel-coat finish
Factory matching orange color
Front edge rain lip that directs water to the edges
VEHICLE TYPE
PART NO.
RTV500 & RTV900
FF-RTV9500K
RTV1140
FF-RTV1140K
RTVS
ENGINE&PERFORMANCE
RMX Edition Turbo Kit
Fits: RTV900, RTV1100, RTV1140
Manufactured by: Southwest Ag
»
»
»
»
Great power at all altitudes
Adjustable wastegate
Stainless steel construction
Operates at over 12,000 feet!
DESCRIPTION
PART NO.
SWAG RMX Edition Turbocharger - RTV900
SA-TKRTV900
SWAG RMX Edition Turbocharger - RTV1100
SA-TKRTV1100
SWAG RMX Edition Turbocharger - RTV1140
SA-TKRTV1140
Standard Diesel Turbo Kit
Fits: RTV900, RTV1100, RTV1140
Manufactured by: SFS Specialties
This turbo kit has everything you need to give your RTV the boost
it can handle! Make full use of your RTV’s durable hydrostatic
transmission by installing this proven turbo kit. Simple bolt on
installation takes only a couple of hours and increases horsepower
by as much as 50%.
Whether your needs are for altitude compensation or just more
power, this kit will make your RTV a workhorse without adverse
affects on the power train. Included in this turbo kit is valuable
information on adjustments and changes to make your RTV faster
and more driver friendly.
DESCRIPTION
PART NO.
Diesel Turbo Kit - RTV900
SF-91010
Diesel Turbo Kit - RTV1100
SF-K11010
Diesel Turbo Kit - RTV1140
SF-K141010
Coast Valve
Fits: RTV900, RTV1100, RTV1140
Manufactured by: SFS Specialties
»
»
»
Allows you to slow down and stop without the sudden jolt.
Installation is quick and easy with instruction and can be
completed in less than 30 minutes.
Doesn’t affect power and it also allows it to shift better.
DESCRIPTION
PART NO.
Coast Valve Kit
SF-K91001
877.934.2444
15
RTVS
FIRE&RESCUE
UTV Quick Quench Foam Fire Unit
Fits: RTV900, RTV1100
Manufactured by: RKO Enterprises
»
»
»
»
»
»
»
»
»
»
»
»
»
»
»
»
3 different engine types available
Hannay manual hose reel with 70 feet of 3/4” Good year booster hose
70 gallon water/5 gallon foam copoloy tank with lifetime warranty
Twister 1024 forestry nozzle and PAC nozzle holder
RKO stainless steel piping with lifetime warranty
Pump and piping to match your color code
RKO liquid filled discharge pressure gauge
RKO aircraft/marine alloy skid platform
Mounting Hardware for your vehicle
1-1/2” tank to pump valve
1-1/2” aux. suction valve
1-1/2” rear discharge valve
1” hose reel valve
1” recirc valve
940 lbs w/ fluids (196216A)
966 lbs w/ fluids (196216C)
DESCRIPTION
PART NO.
5.5 HP Honda Manual Rewind on Pump
RK-196216A
9 HP Honda Electric Start with Recoil Backup Engine on Pump
RK-196216C
UTV Rescue Skid with Provider Seat and Storage
Fits: RTV900, RTV1100, RTV1140
Manufactured by: RKO Enterprises
»
»
»
»
»
Heavy-Duty Aircraft/Marine Alloy Aluminum Skid Platform
Junkin JSA 200 Stokes Basket
Stainless Steel Mounting Hardware
(4) Max Strap Stokes Securing
172 lbs. without patient/person
DESCRIPTION
PART NO.
UTV Rescue Skid with Provider Seat and Storage
RK-196218
Each order is custom built for correct
mounting & color matching to vehicle.
UTV Skid Unit - Deluxe Medical/Rescue
Fits: RTV900, RTV1100
Manufactured by: RKO Enterprises
»
»
»
»
»
»
»
»
»
16
Heavy duty aluminum construction
Low profile design
Patient transport system with JSA200 stokes basket
Adjustable attendant seat with seat belt
Storage drawer under Patient Transport System
Oxygen bottle holder
(2) IV bag clips
Available in tough and corrosion resistant copolymer plastic
398 lbs. without patient/person
DESCRIPTION
PART NO.
UTV Skid Unit - Deluxe Medical/Rescue
RK-196217
RTVS
Deluxe Fire & Rescue
Fits: RTV900, RTV1100
Manufactured by: RKO Enterprises
»
»
»
»
»
»
»
»
»
»
»
95 gallon co-poly tank with 5 gallon foam cell with
lifetime warranty-fully baffled NFPA tank
Quick quench foam system
Davey pump system with 9 HP Honda electric start
with recoil backup engine on pump
Pump Performance/ 120GPM @ 60PSI, 20GPM @
155PSI respectively
Hannay manual rewind hose reel to include 70
feet of 3/4” Goodyear booster hose. (1) 12-25 GPM
forestry nozzle, (1) 1” air aspirated foam nozzle
Grote LED worklight
All valves include nomenclature tags to identify
each valve, fill tower, tank level gauge
All piping to be painted to your paint code
Watertight wiring system
Custom stretcher system, to include stokes basket,
quick release-attach system
(1) front (1) rear and (2) side mounted whelen LED
flashing red lights (amber, white, or blue available
upon request)
1,298 lbs. with fluids
DESCRIPTION
PART NO.
Deluxe Fire & Rescue
RK-196214
Deluxe Aluminum UTV Firefighting Offroad Trailer
Fits: RTV900, RTV1100, RTV1140
Manufactured by: RKO Enterprises
»
»
»
»
»
»
»
»
»
»
»
»
95 gallon copoly tank with 5 gallon integral foam cell
Quick quench foam system
Darley/Davey high performance fire pump system with 9 HP Honda electric start engine with recoil backup
Heavy duty aircraft alloy aluminum trailer/lightweight construction with roll around jack stand/foot plate included
Independent torsional axle for smooth ride
Tool storage
Steel wheels with standard tires
Stainless steel piping with lifetime warranty
Hannay manual hose reel with 70 feet of 3/4” red booster hose and 1” forestry nozzle
discharge pressure gauge
1-1/2” discharge; 1” discharge; 1” recirc-fill; 1” to hose reel
Capable of drafting to 18 feet
DESCRIPTION
PART NO.
Deluxe Aluminum UTV Firefighting Offroad Trailer
RK-1962306
Top Mount Fire Unit
Fits: RTV900, RTV1100, RTV1140
Manufactured by: RKO Enterprises
»
»
»
»
»
»
»
»
»
»
»
»
»
»
»
100 gallon copoly tank with 8 gallon foam cell with lifetime warranty
Hale HPX75-B11 pump with 11hp Briggs & Stratton intec 4-stroke engine,
electric start with recoil backup and voltage regulator, easy oil change valve,
hourmeter and control panel built on engine
RKO stainless steel piping with lifetime warranty
RKO quick quench foam system (free)
Hannay electric hose reel with (1) hose reel activation switch
100 feet of 3/4” goodyear booster hose
TFT 1024 forestry nozzle with pac nozzle holder
Paint to your color code
12 volt power supply
2” tank to pump valve
1 1/2” aux. suction valve
(2) rear discharges
1” recirc fill valve & 1” hose reel valve
Mounting hardware
1,210 lbs. with fluids
DESCRIPTION
PART NO.
Top Mount Fire Unit
RK-1962702
877.934.2444
17
RTVS
FLOORMATS
Optional Black LINE-X finish provides superior
anti-slip finish for ultimate traction and control!
Diamond Plate Floor Mats
Manufactured by: DiamondBack UTV
»
»
Added protection while driving your UTV
Protected from branches, stones, and other items that could find
their way through the floor of your Kubota RTV over time.
Available in a black LINE-X finish, which acts as an anti-slip finish
that can help give you some extra traction and control
Cut specific to the Kubota RTV to give you that tough, outdoor,
off-road look
»
»
DESCRIPTION
PART NO.
RTV 500 Diamond Plate Aluminum Floor Mats - (Polished Aluminum)
DB-KR508FM
RTV 500 Diamond Plate Aluminum Floor Mats - (Black Line-X)
DB-KR508FMX
RTV 900 Diamond Plate Aluminum Floor Mats - (Polished Aluminum)
DB-KR908FM
RTV 900 Diamond Plate Aluminum Floor Mats - (Black Line-x)
DB-KR908FMX
HEAT&AIR
Off Road Hydronic Cab-Heater
(UTV Installation Kit Sold Separately)
Manufactured by: Aqua-Hot
»
»
»
»
»
Installation Kit for Off Road Hydronic Cab-Heater
(Heater Sold Separately)
Manufactured by: Aqua-Hot
Compact size - allows mounting in tight areas
As low as 1/2 of an AMP - Long hours of heat without draining your battery
Universal mounting system
Integrated switch - No wiring or mounting needed
Variable speed - Set the fan speed to your comfort level
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
0.5 Amp Off Road Hydronic Cab Heater
AH-EXE200100
UTV Installation Kit for Off Road Hydronic Cab Heater
AH-PLE200150
2 Amp Off Road Hydronic Cab Heater
AH-EXE200200
BEST
SELLER
12 Volt Ceramic Heater
12 Volt Metal Fan
Manufactured by: Road Pro
»
»
»
»
»
18
300 Watts, 12 Volt
15 Amp rating
12 Gauge 15’ power cord
3 speed adjustable fan
Direct hook up to your battery
Manufactured by: Road Pro
DESCRIPTION
PART NO.
12 Volt Ceramic Heater
RP-681
»
2 Speed Metal Fan
»
7’ power cord
»
Mounts to any flat surface
»
Ball swivel base allows for
adjustment
DESCRIPTION
PART NO.
12 Volt Metal Fan
RP-1179
RTVS
HUNTINGGEAR
Ratcheting Rhino Grips
Gun Mount
»
»
»
»
Manufactured by: Kolpin
Soft cross pattern rubber grips provide increased cushioning and gripping
power for items in a variety of shapes and sizes
Adapter Plate Sold Separately
Manufactured by: Kolpin
Mounts to the floor of your UTV for easy access
Adjustable with molded v-blocks and rubber straps to support firearm and barrel
Adjustable height from 27 1/2” to 35 1/2”
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Ratcheting Rhino Grips
KP-21540
Gun Mount
KP-20073
Boottector Bracket
Manufactured by: Kolpin
In
Bed Double Gun Boot 6.0 Mount
Manufactured by: Kolpin
»
»
»
»
»
»
»
»
Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only!
Mounts to steel bed rail
Adjusts without the use of any tools
Offers precision gun angle adjustability
Secure mount cradles two Kolpin Gun Boot® 6.0’s (sold separately) in the bed of your RTV
Mounting location does not interfere with rear visibility
Compact design allows plenty of bed space
Fits vehicles with bed dimension: 47.5” min - 55” max
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Boottector Bracket
KP-20035
47.5-55” Bed
KP-20005
877.934.2444
19
RTVS
Double Gun Boot IV Mount
Gun Boot IV Metal Bracket
Gun Boot IV Loop Bracket
Manufactured by: Kolpin
Manufactured by: Kolpin
»
»
»
»
»
»
»
Manufactured by: Kolpin
»
Safely carries two Gun Boot® IV cases
Heavy gauge steel with multiple
attachment points
Mounts to rear mesh or center roll
bar tubing
Manufactured by: Kolpin
Metal, two-piece brackets mount
your gun boot horizontally on the
bed rail
Fits the Kolpin Gun Boot IV case only
»
All-metal constructed loop bracket
Fits Gun Boot® IV and Gun Boot® 6.0
cases only
Gun Boot 4.3 with Bracket
»
Includes Gun Boot® case and bracket
Gun Boot® IV case convenience with
Gun Boot® III case type mount!
Removable, shock absorbing foam
and nylon Impact™ liner included
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Double Gun Boot IV
Mount
KP-20036
Gun Boot IV Metal
Bracket
KP-20129
Gun Boot IV Loop
Bracket
KP-20032
Gun Boot 4.3 with
Bracket
KP-20053
Gun Boot IV
Manufactured by: Kolpin
Most popular and versatile Gun Boot case for over 10 years!
Ergonomically designed handle and molded attachment points for a sling
Designed to accomodate left and right hand bolt action rifles and shotguns
DESCRIPTION
PART NO.
Gun Boot IV (Black)
KP-20051
Gun Boot IV (Mossy Oak Breakup)
KP-20061
Gun Boot IV (Realtree HD)
KP-20091
Black
Mossy Oak Breakup
Realtree HD
Gun Boot 6.0
Manufactured by: Kolpin
»
»
»
»
»
»
Features the largest interior room of all Kolpin Gun Boot® cases
Fits up to 51” firearm
Includes nylon liner (Impact Model)
Includes soft interior carrying case (Transport Model)
Provides ample room for 60mm scopes
Utilizes all existing Gun Boot® IV brackets (sold separately) in
order to mount to your RTV
DESCRIPTION
PART NO.
Gun Boot 6.0 (Impact - Black)
KP-20025
Gun Boot 6.0 (Transport - Black)
KP-20020
Impact™ model includes a removable, shock absorbing
foam and nylon Impact™ liner (not shown) that provides
superior interior protection
Transport™ model also includes a separate soft carrying
gun case (shown above) that fits within the hard case
instead of the standard Impact™ liner.
20
RTVS
Power-Ride Gun Rack
Manufactured by: Great Day
Manufactured by: Great Day
Power-Ride Bow Rack
Power-Ride Crossbow Rack
»
»
»
»
»
»
»
»
»
»
Fits UTV frames 49” - 62” wide
Aircraft aluminum construction
Powder coat finish
Soft cradles with velcro straps
Manufactured by: Great Day
Fits UTV frames 49” - 62” wide
Aircraft aluminum construction
Cradle grips the limbs of any bow and prevents any
other part from touching anything
Fits UTV frames 49” - 62” wide
Aircraft aluminum construction
Cradle grips the limbs of any bow and prevents any
other part from touching anything
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Power-Ride Gun Rack
GD-UVPR900
Power-Ride Bow Rack
GD-UVPR901
Power-Ride Crossbow Rack
GD-UVPR901CB
UTV Powerloader
Manufactured by: Great Day
»
»
»
»
»
»
»
»
Load big game, firewood, tool-boxes, ice-chests, saks of feed or seed, bales of hay, building materials, fence posts you name it! Without physically lifting one pound!
Turn 2 and 3-man jobs into routine, single-handed tasks. The PowerLoader will even enable you to do chores that you thought you were no longer capable of handling
At the push of a button, the patented telescopic lifting arms of the PowerLoader retract and curl in seconds to eliminate leverage-moving loads of up to 350 lbs.
Installs onto your UTV in just minutes!
Loads up to 350 lbs from ground to “locked and loaded” - ready for transport
Constructed of super-tough aircraft aluminum
Weighs only 29 lbs
Powered by any factory or aftermarket winch (Minimum 2000 lb winch Recommended - SOLD SEPARATELY)
DESCRIPTION
PART NO.
Power Loader
GD-PL250
Power Loader UTV Mounting Bracket
(Required for RTV900)
GD-PLUT1
Winch Sold Separately - see page 32
877.934.2444
21
RTVS
Quick Draw Gun Rack
Manufactured by: Great Day
»
»
»
»
DESCRIPTION
PART NO.
Quick Draw Gun Rack
GD-QD800
Manufactured by: Great Day
»
22
Manufactured by: Great Day
Universal mounting
Holds 2 guns (shotgun, rifle, or muzzleloader)
Unique velcro straps
Quick and easy installation
Overhead Gun & Bow Racks
»
»
»
Quick Draw Bow Rack
Installs in just minutes without any drilling or bolting
Super-soft rubber gun clips that provide easy access and secure transport
Installs on RTVs with regular tops (WILL NOT WORK on tops that prevent access to
rear top frame)
Fits upper (roof ) frames that measure 23-28” from front to back as well as 28-35”
from front to back
»
»
»
»
DESCRIPTION
PART NO.
Quick Draw Bow Rack
GD-801S
Provides Security and Quick Access
Holds 2 bows
Constructed of aircraft aluminum
Weighs only 8 lbs.
VEHICLE TYPE
BOW RACK PART NO.
RTV 500
GD-QD850OBR
GUN RACK PART NO.
GD-QD850OGR
RTV 900
GD-QD8510BR
GD-QD851OGR
RTV 1100
**not available
**not available
RTV 1140
GD-QD851OBR
GD-QD851OGR
RTVS
IMPLEMENTS
“The Farmboy” 3-Point Hitch System
Manufactured by: UTV Hitchworks
»
»
»
»
»
»
Standard Category 1, 3-point hitch
Quick and easy 15-minute installation, no drilling or welding is
required at any time.
Unique, 3 point mounting system which relieves the receiver hitch
of most of the weight 2 split clamps tighten onto the main rear
frame, serving the dual purpose of supporting 90% of the weight
and compensating for side load.
Lift capacity of 600 lbs., allowing it to use thousands of implements ranging from disc harrows to aerators to snow plows
Able to attach to both the front and the rear of the RTV, it exponentially increases the versatility of the vehicle.
Hydraulic down pressure makes tasks such as aerating a lawn and
clearing snow from around doors and garages much easier.
When placing your order, please provide the following information:
1. RTV model # (900, 1100, or 1140)
2. Size of receiver hitch (2” or 1 1/4”)
3. Amount of hydraulic ports (2 or 4)
DESCRIPTION
PART NO.
“The Farmboy” 3-point hitch
HW-UTVFB1
Hydraulic Selector Valve
HW-UTVHSV
- Front Line & Manifold Option
HW-UTVFLM
Hydraulic
Selector Valve
Manufactured by: UTV Hitchworks
This Hydraulic Selector Valve with greatly improve the versatility of both your
3-point hitch and your RTV by providing 4 hydraulic ports instead of the 2 that
come factory.
This Selector Valve allows for the use of a hydraulic implement along with our
3-point hitch, or, for the winter months, it lets the user operate a plow with both
hydraulic vertical movement AND hydraulic angling (with the Front Line & Manifold Option), without having to get out of the cab.
*Very easy, 30 minute installation
**Front Line & Manifold option is not included in the Hydraulic Selector Valve Kit
877.934.2444
23
RTVS
Implements - 43” Chisel Plow-Cultivator
Manufactured by: Kunz Engineering
Create that trophy deer or wildlife
food plot, new lawn or garden.
In many cases the standard tow
behind UTV disk harrow or UTV
field cultivator with spring shanks
can only create a shallow seedbed.
Equipped with rigid shanks which
are capable of easily creating
deep seedbeds which in many
cases translates to a stronger,
faster growing crop. It can also be
equipped with an optional drag
harrow and a turning shovel kit for
working in sod conditions.
»
»
»
»
»
»
»
Electric lift with operator controls
13.5” dia. cutting coulter
5 rigid, 1 3/8” square shanks
Adjustable and quick remove shanks
9” wide cultivator sweeps
Narrow chisel points included for hard ground
43” cutting width
DESCRIPTION
PART NO.
43” Chisel Plow
KZ-003500
43” Drag Harrow (Optional)
KZ-003800
Turning Shovel Kit (Optional)
KZ-003801
Implements - 48” Cultipacker
Manufactured by: Kunz Engineering
»
»
»
»
»
Provides proper seed to soil
»
48” packing width
contact, which translates
»
Quick remove tongue hitch pin
to faster, more dependable
»
272 lbs without added weight
»
Weight rack included
seed germination.
»
Solid steel shaft with agricultural
Made up of 21 individual
agricultural quality cast iron
quality gearable bearings
packer wheels
Flip over lift method
DESCRIPTION
PART NO.
21, 9.5” diameter, cast iron
KZ-003503
packer wheels with crushing 48” Cultipacker
knobs (agricultural quality)
Cat. 1, 3-point hitch kit
KZ-003803
13/600 x 6, 2 ply pneumatic
turf tire
Wheel Kit - flip over design
KZ-003802
Implements - 72” Cultipacker
Manufactured by: Kunz Engineering
»
»
»
»
»
»
»
»
32, 9.5” dia. cast iron packer wheels with crushing knobs (agricultural quality)
Optional wheel kit with 13/600 x 6, 2 ply
Pneumatic turf tires (optional)
72” packing width
Quick remove tongue hitch pin
384 lb. weight
Optional 3-point hitch kit
Solid steel shaft with agricultural quality greasable bearings
DESCRIPTION
PART NO.
72” Cultipacker
KZ-003502
Cat. 1, 3-point hitch kit
KZ-003803
Wheel Kit - flip over design
KZ-003802
48” Pull Behind Drag Harrow
Manufactured by: Kolpin
»
»
»
»
24
Attaches quickly to your UTV to help loosen compacted dirt
With the steel teeth forward and down, it cultivates, prepares seed beds and rakes up
dead forage
Design allows operation in different direction for ground penetration or as a drag mat
4’ w x 5 1/2’ l = 22 sq ft
DESCRIPTION
PART NO.
48” Heavy Duty
KP-86820
RTVS
AcrEase Pull Behind Rough Cut Mowers
Manufactured by: Kunz Engineering
These are great all around mowers that are capable of tackling heavy
brush and tall grass, field or pasture mowing, food plots, or just as a
trail cutter. These heavy duty brush come in several different engine
sizes and blade engagement clutch methods. AcrEase rough cut
models offer the highest horsepower and heaviest built decks on the
market for pull behind UTV mowers.
VEHICLE TYPE
PART NO.
Class: 44” Rear Discharge 19.5 Briggs & Stratton Intek AVS (Model # MR44B)
KZ-003725
Class: 44” Rear Discharge 18HP OHV Briggs & Stratton Commercial Vanguard (Twin
Cylinder) (Model #MR44V)
KZ-003733
Class: 57” Rear Discharge 23 HP Briggs & Stratton Intek OHV (Twin Cylinder) (Model
# MR55B)
KZ-003724
Class: 57” Rear Discharge 20 HP Kohler Command OHV (Twin Cylinder) (Model #
MR55K)
KZ-003709
Electric Clutch Blade Engagement 20 HP Kohler Command OHV (Twin Cylinder)
(Model # MR55KE)
KZ-003721
Electric Clutch Blade Engagement 23 HP Briggs & Stratton Commercial Vanguard
(Twin Cylinder) (Model # MR55VE)
KZ-003734
AcrEase Pull Behind Finish Cut Mowers
Manufactured by: Kunz Engineering
These are great for providing an excellent manicured lawn at high
mowing speeds. Built in heavy duty homeowner, commercial and
professional grades. AcrEase mowers can either trail directly behind
the tow vehicle or trail to the side. Tow an AcrEase with most any UTV,
small riding mower, zero turn radius mower, or small tractor!
VEHICLE TYPE
PART NO.
Class: Homeowner 40” 12.5 HP OHV Briggs & Stratton (Model # H40B)
KZ-003729
Class: Homeowner 60” 19.5 Briggs & Stratton intek AVS (Model # H60B)
KZ-003722
Class: Commercial 60” 18 HP OHV Briggs & Stratton Commercial Vanguard
(Twin Cylinder) (Model # C60V)
KZ-003732
Class: Professional 60” 23 HP OHV Briggs & Stratton Commercial Vanguard
(Twin Cylinder) (Model # Pro60V)
KZ-003730
Wetlands Kit
Finish Cut UTV Tongue
Floatation Kit
Electric Lift Kit
»
»
»
»
»
»
»
»
»
»
Manufactured by: Kunz Engineering
Doubles tire ground surface content
Great for marshy areas
Easy to install
Manufactured by: Kunz Engineering
Allows offset position
Quick maneuverability & stability
Included w/ all Rough Cut Mowers
Manufactured by: Kunz Engineering
Great for mowing around ponds
or uneven ground where
scalping can occur
Manufactured by: Kunz Engineering
1500 lb linear actuator
Allows for quick cutting height changes
In-cabin switch
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Wetlands Kit
KZ-003905
H40B, H60B, C60V Tongue
KZ-900084
Floatation Kit
Call for Part #
KZ-003909
Pro60V Tongue
KZ-900083
Electric Lift Kit
(57” Rough Cut Models)
Electric Lift Kit
(44” Rough Cut Models)
KZ-003912
877.934.2444
25
RTVS
LIGHTS
LED Lights
Manufactured by: Kolpin
» Plug and play wiring harness with switch
» No warm up, instant on/off
» No hot spots
» 10-50V DC input
» No vibration or bouncing beams
» 100% optically clear lens
» Zero UV emissions
» IP68 rating
»Waterproof
» Offroad use only
Clamp Kit
»
»
»
»
3 piece adjustable clamp system
Mount your new lightbar to any
size tubing from 1” - 2”
Allows you to mount your light bar
at any angle
Easy installation
LED Dually - Single
LED Dually - Double (Pair)
»
»
»
»
»
»
4 LED lights in a compact package
Small 3” - 3” dimension, this light can
fit anywhere
1.1 Amps 15 watts 1300 Lumens
4 LED lights in a compact package
Small 3” - 3” dimension, this light can fit anywhere
1.1 Amps 15 watts 1300 Lumens
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
1.5” Clamp Kit
(RTV500)
KP-97972
LED Dually - Single (Flood
Pattern)
KP-97905
LED Dually - Double (Flood
Pattern)
KP-97910
2” Clamp Kit
(RTV900 & RTV1140)
KP-97970
LED Dually - Single (Spot
Pattern)
KP-97906
LED Dually - Double (Spot
Pattern)
KP-97911
Combo LED
Light Bar
Manufactured by: Kolpin
» 93% Optical Efficiency
»Shockproof/Waterproof
» 50,000+ Hour Life Span
» Easy Two Wire Installation
» Flood reflectors on the
outside of the light and spot
reflectors on the inside half of
the light
» Optimize both functional light
spread and light distance for
increased visibility
10” & 20” Combo Light Bar
30” & 40” Combo Light Bar
»
»
»
»
10” Dimensions: 11 3/8” L x 3.625” W x 3.375” H
10” Current Draw: 2.89 Amps, watts: 39, Output: 3600
Lummens
20” Dimensions: 21 3/8” L x 3.626” W x 3.375” H
20” Current Draw: 5.78 Amps, Watts: 78, Output: 7200
Lummens
»
»
»
»
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
10” Combo Light Bar
KP-97920
30” Combo Light Bar
KP-97930
20” Combo Light Bar
KP-97925
40” Combo Light Bar
KP-97935
6” Combo Light Bar
Light Bar Cradle
»
»
»
Dimensions: 7 3/8” L x
3.625”W x 3.375” H
Current Draw: 1.73 Amps,
Watts: 23.4, Output: 2160
Lummens
»
»
»
26
30” Dimensions: 31 3/8” L x 3.625” W x 3.375” H
30” Current Draw: 8.67 Amps, Watts: 117, Output: 10800 Lummens
40” Dimensions: 41 3/8” L x 3.625” W x 3.375” H
40” Current Draw: 11.56 Amps, Watts: 156, Output: 14400
Lummens
Alternate option to mount your
light
Use on existing tabs, flat surfaces,
or anywhere traditional mount
won’t work
Powder coated black for durable
finish
Easy installation
DESCRIPTION
PART NO.
6” Lights Cradle
KP-97980
10” Lights Cradle
KP-97981
20” Lights Cradle
KP-92982
DESCRIPTION
PART NO.
30” Lights Cradle
KP-97983
6” Combo Light Bar
KP-97915
40” Lights Cradle
KP-97984
RTVS
MIRRORS
Rear & Side View Mirror
Manufactured by: Kolpin
»
»
»
»
»
»
»
Rear and/or side mounting options
Easy to adjust with the quick-pivot design
Clamp design allows overhead mounting in your UTV with a roof installed
The wide angle, convex lens provides high visibility
Over-molded grips help to reduce vibration
Accommodates up to 2” tubing
Dimensions: 10” x 3”
DESCRIPTION
PART NO.
Rear & Side View UTV Mirror
KP-98300
Side/Rear View Mirror
Auto Style Rear View Mirror
»
»
»
»
»
»
»
»
»
»
Manufactured by: Seizmik
Manufactured by: Seizmik
Mounts anywhere; side or rear view
Convex surface provides large viewing area
Ball socket joint gives wide range
4.5” x 8” viewing surface
Shatterproof tempered glass for safety
Strong and durable cast alloy arm
High impact ABS plastic housing
Shatterproof tempered glass
High visibility
Increased maneuverability
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
RTV500 Side/Rear View UTV
Mirror - 1.5” clamp
SM-18037
Auto Style Rear View UTV
Mirror - 1.5” clamp
SM-18042
RTV900 & RTV1140 Side/Rear
View UTV Mirror - 2” clamp
SM-18017
Auto Style Rear View UTV
Mirror - 2” clamp
SM-18047
RACKS
Rear Utility Rack
Manufactured by: Great Day
This UTV Rear Utility Racks adds an extra dimension of usefulness to
a side-by-side, off-road vehicle. Mounts to the UTV bed and provides
an extension of the UTV’s cab frame--providing the perfect place to
transport bulky, but light-weight equipment or materials.
»
»
»
»
Constructed of aircraft aluminum
Weighs only 22 lbs.
Rated for loads up to 100 lbs.
Assembled in just minutes using regular
hand tools!
Roof
Rack
Manufactured by: Great Day
»
»
»
Weighs only 14 lbs.
22” x 50” x 7” cradle with multiple tie
down points
Rated for loads up to 100 lbs.
VEHICLE TYPE
PART NO.
RTV 500
GD-UVUR5
RTV 900
GD-UVUR6
DESCRIPTION
PART NO.
Roof Rack
GD-UVRR750
Shown on RTV900
Hood Rack - RTV500
Manufactured by: Seizmik
»
»
»
»
»
Pivots forward to allow quick access
under the hood
Hood rack has multiple attachment
points for hooks and straps
Upper rack rail help contain items
Accepts gear grips, chain clamps,
and more!
Works seamlessly with Seizmik
windshields and soft tops
Pivots for Easy Hood Access
DESCRIPTION
PART NO.
Hood Rack & Brush Guard (with factory bumper)
SM-08054
Hood Rack & Brush Guard (without factory bumper)
SM-08055
877.934.2444
27
RTVS
Hood Rack - RTV900, RTV1100, RTV1140
Manufactured by: Seizmik
Innovative design to maximize functionality and style for your RTV.
Carry extra gear while leaving your cab and bed clear.
»
»
»
»
»
Perimeter basket for maximum cargo
Streamlined configuration for increased visibility
Mounts easily with no drilling required
Pivot forward for quick & easy hood access
Heavy-duty powder coated steel construction
DESCRIPTION
PART NO.
Hood Rack - RTV900, 1100, 1140
SM-08050
Pivots for Easy Hood Access
Hitch & Ride Utility Rack
Manufactured by: Great Day
Perfect for transporting anything from hunting equipment, work
materials, coolers, to firewood or wild game! It’s perfect for working around the ranch, home, camp, or industrial site.
»
»
»
»
»
»
Aircraft aluminum construction
Weighs only 22 lbs, but has a 400 lb capacity
22” x 50” x 7” carrying cradle
Many tie-down points to insure secure transport
Attaches to any 2” hitch receiver
“Z-Bar” attachment allows clearance over uneven terrain
DESCRIPTION
PART NO.
Hitch & Ride Utility Rack for 2” Receiver (with Z bar)
GD-HNR1000UTV
Hitch & Ride Magnum Cargo Carrier for 2” Receiver (with Z bar)
GD-HNR2000UTV
Hitch & Ride DRY HAUL Cargo Carrier for 2” Receiver (with Z bar)
GD-HNR3000UTV
Hitch & Ride Magnum Cargo Carrier
»
»
»
»
»
»
28
Weight: 25 lbs
Aircraft aluminum
400 lb load capacity
Outside cradle dimensions: 22” x 50” x 6”
Inside cradle dimensions: 20” x 48” x 6”
Z-Bar gives a 7” rise
Hitch & Ride Dry Haul Cargo Carrier
»
»
»
»
Can be removed and serve as portable storage
Aircraft aluminum construction
400 lbs. of carrying capacity
Water-proof, dust-proof polyethylene storage case
RTVS
RAMPS
Premium Arched Steel Ramps
Manufactured by: Ohio Steel
These Premium arched steel ramps are the perfect solution for loading
UTV’s and lawn tractors onto pickup trucks! The arched design ensures
that your mower deck will not hang-up on the tailgate and are perfect
for loading low ground clearance vehicles. Ramps fold to 63-1/2” long for
convenient storage.
800-lb Steel Loading Ramp
1200-lb Steel Loading Ramp
These ramps feature solid body construction with a punched tread pattern
for superior traction over rung-style ramps. Patented overlapping hinges
provide added structural support, allowing for a high load capacity of 1,200
lbs., 1,500 lbs., or 2,000 lbs. of distributed weight per set.
»
»
»
»
Solid construction perfect for small wheeled items
2 cam buckle straps included for securing ramps to truck
Patented overlapping hinge and heavy-duty steel for heavy loads
Arch design for loading items with low ground clearance
DESCRIPTION
PART NO.
DIMENSIONS
LOAD CAPACITY
1500-lb Aluminum
Loading Ramp
2000-lb Steel Loading Ramp
Premium Arched Aluminum Ramp
FOLDING/OPEN POSITION LENGTH
CONSTRUCTION MATERIAL
WEIGHT
800-lb Steel Loading Ramp
OS-1084D
12.25 in. W x 88 in. D x 6.25 in. H;
84” x 10.5” x 2” (each)
800 lb. (400 lbs./ramp)
84 in. open; 63.5 in. fold
16 gauge steel
71 lbs
1200-lb Steel Loading Ramp
OS-1084C
12.25 in. W x 88 in. D x 6.25 in. H;
84” x 10.5” x 2” (each)
1,200 lb. (600 lbs./ramp)
88 in. open; 63.5 in. fold
14 gauge steel with black
powder coat finish
71 lbs
1500-lb Aluminum Loading Ramp
OS-1084A
14.25 in. W x 88 in. D x 7 in. H; 84”
x 10.5” x 2” (each)
1,500 lb. (750 lbs./ramp)
n/a
12 gauge aluminum
49 lbs
2000-lb Steel Loading Ramp
OS-1084
14.25 in. W x 88 in. D x 7 in. H
2,000 lb. (1000 lbs./ramp)
88 in. open; 63.5 in. fold
14 gauge steel with black
powder coat finish
83 lbs
SEATSCOVERS
Manufactured by: Greene Mountain
Available in 3 colors!
»
»
»
»
»
Offers great protection to factory seat bottom and backrest
Easy installation and no tools needed
Comes with all necessary mounting items and instructions
Made from 600 denier PVC backed Polyester
Under-seat straps used for a factory fit
DESCRIPTION
PART NO.
RTV500 - Bench Seat Cover (Black)
GM-KUB500BS11
RTV500 - Bench Seat Cover (Camo)
GM-KUB500BS155
RTV500 - Bench Seat Cover (Grey)
GM-KUB500BS12
RTV900 - Seat Covers w/ Head Rest Covers (Black)
GM-KUBBS11
RTV900 - Seat Covers w/ Head Rest Covers (Camo)
GM-KUBS155
RTV900 - Seat Covers w/ Head Rest Covers (Grey)
GM-KUBS12
RTV1100 - Seat Covers w/ Head Rest Covers (Black)
GM-KUB1100BS11
RTV1100 - Seat Covers w/ Head Rest Covers (Camo)
GM-KUB1100BS155
RTV1100 - Seat Covers w/ Head Rest Covers (Grey)
GM-KUB1100BS12
RTV1140 - Seat Covers (Black)
GM-KUB1140BS11
RTV1140 - Seat Covers (Camo)
GM-KUB1140BS155
RTV1140 - Seat Covers (Grey)
GM-KUB1140BS12
877.934.2444
29
RTVS
TIRES
KT125 - Swamp Boss
Trailfinder VPR
Manufactured by: Vision Wheel
Manufactured by: Vision Wheel
»
»
»
»
»
»
»
»
»
»
»
»
Manufactured by: Vision Wheel
Height: 27”
Width: 10”, 12”
Ply: 6
Fits rim size: 12”
Goodyear Rawhide
Height: 26”
Width: 10”, 12”
Ply: 6
Fits rim size: 14”, 15”
Height: 26”
Width: 9”, 11”
Ply: 6
Fits rim size: 14”
RTV Lug Patterns
RTV500
RTV900
RTV1100
RTV1140
W350 All Terrain
30
4-110
5-4.5
5-4.5
5-4.5
KT306 - Load Boss
Manufactured by: Vision Wheel
Manufactured by: Vision Wheel
»
»
»
»
»
»
»
»
Height: 27”
Width: 10”, 12”
Ply: 6
Fits rim size: 12”, 14”
Height: 25”
Width: 8”, 10”
Ply: 6
Fits rim size: 12”
RTVS
WHEELS
Outback - Machined
Manufactured by: Vision Wheel
Manufactured by: Vision Wheel
Outback - Black
Outback - Camo
»
»
»
»
»
»
»
»
»
Width: 7”, 8”
Height: 12”, 14”
Fits: ALL
Buckshot - Machined
Width: 7”, 8”
Height: 12”, 14”
Fits: ALL
Manufactured by: Vision Wheel
Width: 7”, 8”
Height: 12”, 14”
Fits: ALL
Manufactured by: Vision Wheel
Manufactured by: Vision Wheel
Lockout - Black
Lockout - Chrome/Black
»
»
»
»
»
»
»
»
»
Width: 7”, 8”
Height: 12”, 14”
Fits: ALL
Width: 7”, 8”
Height: 12”
Fits: ALL
Manufactured by: Vision Wheel
Width: 7”, 8”
Height: 12”
Fits: ALL
Bruiser - Machined
Bruiser - Black
Warrior
Manufactured by: Vision Wheel
Manufactured by: Vision Wheel
Manufactured by: Vision Wheel
»
»
»
»
»
»
»
»
»
Width: 7”, 8”
Height: 12”, 14”
Fits: RTV500
Width: 7”, 8”
Height: 12”, 14”
Fits: RTV500
Width: 7”, 8”
Diameter: 14”
Fits: RTV500
877.934.2444
31
RTVS
eries
S
tough
V’s
OR RT
F
S
E
WINCH
PE3.5
WINCH&RECOVERY
Manufactured by: Mile Marker
PE2.5
3,500 LB
Capacity
(1588 kg)
PN: MM-7750112B
2,500 LB
Capacity
(1134 kg)
PN: MM-7750105B
The new Tough Series lineup UTV winches have been totally redesigned
and now boast top-of-the-line recovery speeds and a new braking system.
These winches include both a handheld remote control, as well as a ATV
handlebar mounted remote control with “power in” and “power out” functions. The Tough Series winches also include a new 300 amp rated solenoid,
giving maximum duty cycle to these bantam size power houses.
DESCRIPTION
PART NO.
2,000 lb. Tough Series UTV Winch
MM-7650100
2,500 lb. Tough Series UTV Winch
MM-7750105B
2,500 lb. Tough Series UTV Winch w/ Synthetic Rope
MM-7753105B
3,500 lb. Tough Series UTV Winch
MM-7750112B
3,500 lb. Tough Series UTV Winch w/ Synthetic Rope
MM-7753112B
4,500 lb. Tough Series UTV Winch
MM-7650115B
Winch Mount for RTV900 & RTV1100 (2008-2011)
MM-511812
PE4500
4,500 LB
Capacity
(2041 KG)
PN: MM-7650115B
PRODUCT FEATURES:
»
»
»
»
»
»
»
»
Fast Line Speeds
Redesigned Braking Mechanism
All Metal Planetary Gearing
Includes both Handheld and
Handlebar Controls
(PE4500 hand control only)
300 Amp Rated Solenoid
Center Focused Drum
Free Spooling
Roller Fairlead
Rear
Front
32
Winch Accessory Kit
Quick Disconnect Wiring Kit 2” Receiver Cradle Mount
2” Receiver Winch Mount
Manufactured by: Mile Marker
Manufactured by: Mile Marker
Manufactured by: Mile Marker
Manufactured by: Mile Marker
This kit includes everything that you need to
push your RTV to the limits: Two powdercoated shackles, two 1” x 8’ recovery straps, a
snatch block, and a pair of recovery gloves are
all conveniently packaged in a durable carrying
case that can be strapped and mounted
virtually anywhere on your rig.
Disconnecting the wiring from your winch to
your RTV is a snap with our Quick Disconnect
Wiring Kit. Available for the front and the rear.
Move your winch from front to back or to
another vehicle. The cradle mount fits a 2”
receiver hitch. Compatible with Tough Series
PE2.5, PE3.5, & PE4500 winches.
Move your winch from front to back or to
another vehicle. The cradle mount fits a 2”
receiver hitch. Compatible with 2500, 3000,
3500 lb winches.
DESCRIPTION
PART NO.
Winch Accessory Kit
MM-1900105
DESCRIPTION
PART NO.
Rear Quick
Disconnect Wiring Kit
MM-9353105
Front Quick
Disconnect Wiring Kit
MM-9353106
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
2” Receiver Cradle Mount
MM-5106496
2” Receiver Winch Mount
MM-5106595
RTVS
Hi-Lift UTV Jack
Manufactured by: Hi-Lift
WINCH&RECOVERY
The “Original Power Tool” of the off-road market
is now available to meet the needs of the RTV
market with this specialized RTV jack model.
Sized perfectly for RTV operators.... off-roaders,
farmers, ranchers, search and rescue personnel,
and general outdoorsmen.
»
»
»
DESCRIPTION
PART NO.
36” Hi-Lift UTV Jack
HL-UTV364
42” Hi-Lift UTV Jack
HL-UTV424
Lightweight, weighing less than 30 lbs.
Special attachment: standard top clamp-clevis
replaced with winch/clamp/spreader tool
Available in 36” and 42” models
Tube Mount for Hi-Lift™ Jack
Manufactured by: Hi-Lift
Use this tube mount to mount your Hi-Lift™ jack to your RTV!
Manufactured of 6061-T6 structural aluminum and rust resistant
hardware. No drilling required.
DESCRIPTION
PART NO.
Adjustable Tube Mount 1” - 2”
HL-TM700
Adjustable Tube Mount 2” - 3”
HL-TM750
Neoprene Jack Cover for Hi-Lift™ Jack
Off Road Base for Hi-Lift™ Jack
This neoprene jack cover offers a level of mud and dirt
protection for the main lifting mechanism (running
gear) of the jack while stored. It is very important to
keep the lifting mechanism clean, free from dirt and
mud, and well lubricated. The neoprene zipon cover
greatly reduces the amount of dirt and mud that can
accumulate in the working mechanism of the jack
while mounted on the exterior of vehicles.
This wide platform base eliminates jack sinkage on
sand or soft ground. Rugged construction meets
specifications for strength and durability.
Manufactured by: Hi-Lift
Manufactured by: Hi-Lift
DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
Neoprene Jack Cover for Hi-Lift® Jack
HL-NJC
Off Road Base
HL-ORB
877.934.2444
33
RTVS
WINDSHIELDS
Aero-Vent Lexan Windshield
Fits: RTV500, RTV900, RTV1140
Manufactured by: Various manufacturers
»
»
»
»
»
Sliding ventilation system allows users to adjust the amount of
airflow for maximum comfort
1/4” think lexan polycarbonate is nearly bulletproof!
Fitted using stainless steel hardware that will not rust
Easy to install
Comes complete with installation and care instructions
VEHICLE TYPE
PART NO.
RTV500
Call for Item #
RTV900
Call for Item #
RTV1140
Call for Item #
Shown on RTV500 with lower panel
BEST
SELLER
Acrylic Windshield
Fits: RTV500, RTV900, RTV1140
Manufactured by: Seizmik
»
»
»
Impact resistant optical grade acrylic windshield
Easily installs to rollbar without drilling
Anti-vibration mounting system utilizes a special grommet
sandwiched between nylon clamps to isolate vibrations away
from mounted windshields
VEHICLE TYPE
PART NO.
RTV500 - Full windshield with fabric lower panel
SM-30078
RTV900 - Full windshield
SM-23021
RTV1140 - Full windshield
SM-23052
RTV900 & RTV1140 are full length acrylic
Shown on RTV900
34
Shown on RTV1140
RTVS
Rear Window Dust Panel
Shown on RTV500
Fits: RTV500, RTV900
Manufactured by: Seizmik
Our rear window is a dust panel that rolls up out of the way when not in use. It prevents
the back draft that occurs when a windshield and hard top are used. This back panel makes
riding in a RTV under adverse conditions much more comfortable because it keeps the dust,
wind, and rain from entering the cab. Fastens securely around the roll cage with velcro.
VEHICLE TYPE
PART NO.
RTV500
SM-04014
RTV900
SM-04015
RTV1140
**not available**
D.O.T Safety Glass Windshield
Fits: RTV500, RTV900, RTV1140
Manufactured by: Perry Company
We use powdercoated 16 gauge cold roll steel on our windshields. This allows the windshields to be strong and durable while
not being excessively heavy. This windshield connects to the frame of the RTV with clamps that make for an easy installation and
sturdy mounting. The trim on the bottom of our windshield keeps your RTV looking new by preventing leaking and scratching.
Our 3/16” thick D.O.T. safety glass is also trimmed to keep a seal that further prevents leakage. You can easily remove the bottom
valences to increase airflow to the unit in just seconds!
»
»
»
»
»
»
Removable Valance
Flat back wrinkle powder coat
16 gauge cold roll steel
Easy installation clamp system
RTV500 windshield is fixed
RTV900/1140 windshield is sliding
VEHICLE TYPE
PART NO.
RTV500 - fixed
PC-430201
RTV900 - sliding
PC-430303
RTV1140 - sliding
PC-430302
Full Length Tilting Lexan Windshield
Fits: RTV500
Manufactured by: Kolpin
»
»
»
»
»
Versatile 3-position tilt mechanism permits airflow into the driver compartment
1/4” abrasive-resistant GE Lexan MR10
Extremely durable injection molded clamps
All stainless steel, black coated finish hardware
Easy installation
VEHICLE TYPE
PART NO.
RTV500
KP-2200
RTV900
**not available**
RTV1140
**not available**
Rear Lexan Windshield
Fits: RTV500
Manufactured by: Kolpin
»
»
»
»
»
Provides an effective barrier to keep debris from entering the cab
1/8” FMR GE Lexan rear shield
Extremely durable injection molded clamps
All stainless steel, black coat finish hardware
Easy installation
VEHICLE TYPE
PART NO.
RTV500
KP-2201
RTV900
**not available**
RTV1140
**not available**
877.934.2444
35
TRACTORS
AUDIO
Roof Mount Audio Console
Fits: Tractors with a Canopy
Manufactured by: Tractor Tunes
»
»
»
»
»
»
Marine waterproof retractable cover protects the DEH Pioneer CD
Player
MP3/WMA/MAV playback with volumen and memory settings
Connect your portable devices directly through the front AUX input
High intensity domelight option
Includes a high quality AM/FM antenna.
WR85B marine speakers are water, UV, and corrosion resistant and have
a one piece molded grill for speaker protection and durability.
DESCRIPTION
PART NO.
Roof Mount Audio Console - Standard (Black)
TT-RMT
Roof Mount Audio Console - Standard (Camo)
TT-RMTC
Roof Mount Audio Console - Standard (Carbon Finish)
TT-RMTCF
Roof Mount Audio Console - Dome Light (Black)
TT-RMTD
Roof Mount Audio Console - Dome Light (Camo)
TT-RMTDC
Roof Mount Audio Console - Dome Light (Carbon Finish)
TT-RMTDCF
Roll Bar Mount Audio Console
Fits: Tractors with ROPS system
Manufactured by: Tractor Tunes
»
»
»
»
»
»
»
»
»
Fits roll bars and R.O.P.S. size widths from 2 to 3 inches (round or
square).
Includes a high quality AM/FM antenna.
WR85B Marine speakers are water, UV, and corrosion resistant and
have a one piece molded grill for speaker protection and durability.
The DEH Pioneer is a 50 watts x 4,200 total watts mosfet CD player
with AM/FM tuner and 3 band equalizer.
MP3/WMA/MAV playback with volume and memory settings.
Connect your portable devices directly through the front AUX input.
Card Remote Control.
Detachable Face Security.
Overall dimensions: 24 L x 7.5 W x 8.75 H (in)
DESCRIPTION
PART NO.
Roll Bar Mount Audio Console - Standard
TT-MAC2900
Roll Bar Mount Audio Console - with PTO Working
Lights
TT-MACPTO
Roll Bar Mount Audio Console - with Rear Working Lights
TT-MACCRW
Roll Bar Mount Audio Console - with PTO Worklight Kit and Rear Worklight Kit
TT-MACRWPTO
Tread-Brite Heavy-Duty
Diamond Plate Canopy
CaNOPIES
Fits ZD, ZG, F, BX, B, L, & M Series
Manufactured by: Tel-Trax
1900 Series - Fits BX, B, ZD, ZG, & F Series
»
Adjustable frame with rails that slide in and out to adjust to different models
»
U2x3 brackets adjust to the different degree of angle
»
Overall size is 45” x 57”
»
Not FOPS approved
2000 Series - Fits L & M Series
»
Overall size is 57” x 66”
»
Not FOPS approved
DESCRIPTION
PART NO.
1900 Series
TX-AU19002X3
2000 Series
TX-AU20002X3
877.934.2444
37
TRACTORS
Guardian Tractor Canopy with Universal
Mounting Kit - Fits ZD, ZG, F, BX, B, L, & M Series
Manufactured by: Perry Company
»
»
»
»
»
»
Factory matching orange powder coat finish
1/4” overhead asphault sheeting insulation
3/16” steel universal mounting system
Heavy duty 18 gauge steel construction
Available in 2 sizes to fit all tractors & mowers
NOTE: this canopy is NOT FOPS approved
DESCRIPTION
PART NO.
Guardian Tractor Canopy (45” x 48” Orange Steel)
PC-610348
Guardian Tractor Canopy (45” x 58” Orange Steel)
PC-610356
Guardian Tractor Canopy (45” x 48 Tread Bright Aluminum)
PC-618048
Guardian Tractor Canopy (45” x 58” Tread Bright Aluminum)
PC-618056
ABS Plastic Hardtop Canopy
Manufactured by: Original Tractor Cab
»
AVAILABLE IN
WHITE OR BLACK
»
»
»
»
»
Fits most machines with a vertical 2x2 or 2x3 ROPS bar
system
3/16 ABS plastic top (available in black or white)
Powder coated steel frame
Measures---40 5/8” L x 35 1/4” W x 4 1/8” D
Easy on & off after initial installation
Additional support brackets available for commercial use
DESCRIPTION
PART NO.
Hardtop ABS Plastic Canopy (Black)
OT-30382B
Hardtop ABS Plastic Canopy (White)
OT-30382W
Soft Top Sunshade Kit
Manufactured by: Original Tractor Cab
Stay cool while you work and protect yourself from
harmful UV rays. Affordable soft top, vinyl sunshade
that is perfect for seasonal use
»
»
»
»
Mounts to 2x2 or 2x3 ROPS systems with a max. width of 34”
Heavy duty, 13 oz stop-rip vinyl top (available in orange, black, or white)
On/Off in seconds after initial installation
Rough measurements - 35” W x 46” L
DESCRIPTION
PART NO.
Soft Top Sunshade Kit (Orange)
OT-30400
“RagTop” Fabric Sunshade Kit
Manufactured by: Firebird Fiberglass
Easy-on, easy-off fabric canopy without spending a lot of money. Perfect for seasonal use on
tractors and mowers.
»
»
»
»
38
Heavy duty marine grade fabric
7/8” bright anodized aluminum frame
Fits rollbars 24” - 38” wide
Allows for adjustments: 20 degree rear and 10 degree
forward pitch
DESCRIPTION
PART NO.
“RagTop” Fabric Sunshade Kit
FF-RTFF100
TRACTORS
Enclosures
Manufactured by: Cover My Tractor
These vinyl tractor cabs are an excellent alternative to
expensive hard cabs. Simply install over the top of a
pre-existing canopy. The cleanable, durable materials
will give you many years of enjoyment.
»
»
»
»
»
»
»
»
»
»
138 bonded thread creates very strong seams
Optically clear glass (scratch resistant coating)
Water proof durable fabric
Installs in 20 minutes or less!
Sliding side doors easily open for side to side
ventilation
Front and rear windows include zippers to create
front to back ventilation
No drilling holes required for installation
Requires canopy, either aftermarket or OEM
Comes with FREE storage bag!
Available in Orange or Black
How to Order Cab Enclosures for Tractors
with Existing Factory Canopy
STEP 1
How to Order Complete Cab Kit
STEP 1
STEP 2
Define Year, Make, & Model Fixed or Folding Rollbar?
STEP 3
Measure Fender
to top of ROPS
STEP 4
Choose your color:
OEM Plastic
Determine the canopy you have
OEM Fiberglass
STEP 2
Define Year, Make, & Model
STEP 4
Measure Fender
to top of ROPS
N-Series Fiberglass
Tel-Trax Fiberglass
1200, 1900, 2000
STEP 3
Fixed or Folding Rollbar?
STEP 5
Choose your color:
877.934.2444
39
TRACTORS
Hardtop Cab for Kubota BX & GR Series
Manufactured by: Original Tractor Cab
Winter chores are hard enough without risking frostbite to do the job. Our hard top cabs
keep you out of the wind, blowing snow, rain,
and sleet that make winter tractor operation
miserable!
These cabs are composed of 16 gauge steel
tube frames, covered with an extremely
strong, yet light weight stop rip vinyl fabric
that resists abrasion, water, fire, mildew, and
rot. Window material is non-puckering, shatter resistant lexan, that can sustain sub-zero
temperatures without cracking. Top is made
of molded ABS Plastic with UV inhibitor for
durability and appearance.
»
»
»
»
»
No holes to drill!
Forward inclination of windshield minimizes
glare and contact with falling snow and rain
Installation is made quick and simple with
illustrated instructions.
Removal and re-assembly is simple from
season to season
Hinged, wire frame door
Shown on Kubota BX2350
VEHICLE TYPE
PART NO.
BX1830 & 2230 (1500, 1800, 2200)
OT-11486
BX1850, BX1860, BX2350, BX2660, BX2360
OT-11654
GR2000, GR2100, GR2110, GR2010, GR2020, GR2120
OT-11504
Cab Options & Accessories
40
Glass Windshield
Electric Wiper Kit
Work Light Kit
Rear Mirror Kit
Caution Light
OT-10120
OT-10122
OT-11560
OT-11133
OT-9855
TRACTORS
STORAGECOVERS
Manufactured by: Cover My Tractor
Your tractor is an investment...finally you have a way to protect it! Save your paint,
seat & operator compartment from damaging effects of sun and rain. Our unique
zippered design allow you to use the cover with or without the front loader
bucket. The included bag attaches to the roll bar for easy access and storage.
Heavy duty, 100% polyester, solution dyed fabric repels water without staining
your tractor. Custom sewn to fit your tractor.
Storage Bag
The included storage bag comes with a conveniently attached strap and Velcro
system which can mount on the upper portion of the ROPS bar or on each side of
the ROPS bar directly behind the seat. The straps clip to a plastic buckle on the
strap and can be tightened by pulling the strap that comes through the male portion of the buckle. The zipper in the top portion of the bag is covered with a flap
that helps to seal out any rain or snow to keep the cover as dry as possible when
not in use Make sure you only store a dry cover so not to induce any moisture that
may mildew in a closed storage bag.
Simplified Attachment
The full tractor cover is heald in place by elastic in the bottom hem of the cover.
This elastic hooks together in the rear of the cab under the three point hitch or any
rear implement that is on the tractor. The full covers fit on tractors with or without
a loader. The loader and roll over protection bars extend outware of the cover
through openings which zip and/or Velcro together around those openings.
Water Repellency
The fabrics we use are the right mix between water repellency and breathability.
Tested for over 20 years in the cover market, our fabrics withstand the elements
and offer enough breathing to minimize mold and mildew. In addition, the perimeter of the cover allows air circulation for added breathability.
How to Order
STEP 1
Specify Year, Make, & Model
STEP 2
Provide the following answers:
Do you have a front end loader? (Y or N)
Do you have a grille guard? (Y or N)
Do you have front weights? (Y or N)
Do you have an exhaust stack? (if yes, is it on the left or right)
STEP 3
Measure maximum width at rear tires
STEP 4
Measure maximum length minus the loader
STEP 5
Measure height either steering wheel or seat
STEP 6
Choose color
Silver Grey
Charcoal Grey
877.934.2444
41
MOWERS
GR SERIES
LAWN TRACTORS
Hardtop Cab
Fits: GR2000, GR2010, GR2020, GR2100, GR2110, GR2120
Manufactured by: Original Tractor Cab
Winter chores are hard enough without risking frostbite to do the job. These hard top cabs keep you out
of the wind, blowing snow, rain, and sleet that make winter tractor operation miserable! Composed of
16 gauge steel tube frames, covered with an extremely strong, yet light weight stop rip vinyl fabric that
resists abrasion, water, fire, mildew, and rot. Window material is non-puckering, shatter resistant lexan,
that can sustain sub-zero temperatures without cracking. Top is made of molded ABS plastic with UV
inhibitor for durability and appearance.
»
»
»
»
No holes to drill
Forward inclination of windshield minimizes glare and contact with falling snow and rain
Installation is made quick and simple with illustrated instructions
Removal and re-assembly is simple from season to season
DESCRIPTION
PART NO.
Hardtop Cab for GR Series Lawn Tractors
OT-11504
Cab Options & Accessories
Glass Windshield
Electric Wiper
Kit
Work
Light Kit
Rear Mirror Kit
Caution
Light
OT-10120
OT-10122
OT-11560
OT-11133
OT-9855
Soft Top Sunshade
Fits: GR2000, GR2010, GR2020, GR2100, GR2110, & GR2120
Manufactured by: Original Tractor Cab
Constructed of stop-rip heavy duty vinyl, this sunshade is not only affordable, it’s also
durable. Tool-free installation and removal after initial installation, keeps you mowing even under low branches. All standard sunshades come with a FREE rear screen
panel. Stay cool while you work and protect yourself from UV rays.
»
»
»
»
Lawn & Garden Tractor Lift
Manufactured by: Ohio Steel
Make cleaning and servicing your front-engine lawn tractor easier than ever
with this steel tractor lift. The steel lifting bar provides excellent leverage for
moving your tractor into a lifted position. The telescoping lift bars and brace
keep it secure for all of your maintenance needs!
»
»
»
»
42
Heavy-duty steel stabilizer bar ensures mower stays upright during service
Telescoping lift arms and adjustable width provides maximum versatility
10” 2 ply pneumatic tires
Folds for easy storage
DESCRIPTION
PART NO.
Professional Grade Tractor Lift
OS-TL4000
Professional Grade Zero Turn Mower Lift
OS-TL4500
Receivers attach to tractor using existing bolts to avoid drilling
Instantly removable without tools for mowing under low objects
Vinyl cover slips off without disassembly for truck or trailer transport
Installation is made quick and simple with illustrated instructions
DESCRIPTION
PART NO.
Soft Top Sunshade for GR Series Lawn Tractors
OT-30314
MOWERS
Z SERIES &
F SERIES MOWERS
Full Cab Enclosure for F Series Mowers
Fits: KF2260, F2560, F2680, F2880, F3060, F3080, F3680
Manufactured by: Cover My Tractor
These cabs are the best-in-class for craftsmanship, materials, and unique features. The cleanable,
durable materials will give you many years of enjoyment. The cabs unique all season ventilation system
and sliding side doors are firsts in the industry. Come with a FREE storage bag!
»
»
»
»
»
Installs in 20 minutes or less
Custom fit for your tractor
Sliding side doors easily opened for side to side ventilation
Front and rear windows include zippers to create front back ventilation
Requires OEM E1133 Factory Plastic Canopy for sub-structure!
VEHICLE TYPE
PART NO.
F2260/F2560/F3060
GC-KUMENCBK101
F2680/F2880/F3080/F3680
GC-KUMENCBK100
Fiberglass Canopy Kit
Fits: Kubota Mowers with 3” x 2” Rollbar
Manufactured by: Firebird Fiberglass
»
»
»
»
»
»
45” x 47” durable fiberglass construction
DESCRIPTION
High gloss gel-coat finish with UV inhibitors
Factory matching color
NX Fiberglass Canopy Kit
Front & rear reflectors standard
Heavy duty, powder coated steel mounting brackets
Rubber isolator pads float the canopy in rubber to eliminate vibration noise
PART NO.
FF-NXK32
ZG300 & ZD300 Series Rear Hitch
Manufactured by: SFS Specialties
Double the productivity of your 300 series ZG or ZD mower by
installing our heavy duty hitch. This hitch is contoured to the frame
to prevent interference while mowing. Pull all your yard implements
with one machine, taking full advantage of your new, more durable
transaxle.
ZD300
FOR MORE LAWN & GARDEN GEAR,
VISIT OUR WEBSITE!
ZG300
DESCRIPTION
PART NO.
ZG300 Series Rear Hitch
SF-ZG1001
ZD300 Series Rear Hitch
SF-ZD1001
877.934.2444
43
CONSTRUCTION
CONSTRUCTIONCABS
Construction Cab Enclosures
Manufactured by: Cover My Tractor
»
»
»
»
»
»
»
»
»
»
138 bonded thread creates very strong seams
Optically clear glass (scratch resistant coating)
Water proof durable fabric
Installs in 20 minutes or less!
Sliding side doors easily open for side to side
ventilation
Front and rear windows include zippers to
create front to back ventilation
No drilling holes required for installation
Requires canopy, either aftermarket or OEM
Comes with FREE storage bag!
Available in Orange or Black
Shown on Kubota L-48
manufacturer - Cover my tractor
44
VEHICLE TYPE
PART NO.
B21 - black
GR-KUTENCBK201
B21 - orange
GR-KUTENCOR201
B26 - black
GR-KUTENCBK126
B26 - orange
GR-KUTENCOR126
L35 - black
GR-KUTENCBK131
L35 - orange
GR-KUTENCOR131
L45 - black
GR-KUTENCBK110
L45 - orange
GR-KUTENCOR110
L48 - black
GR-KUTENCBK134
L48 - orange
GR-KUTENCOR134
M59 - black
GR-KUTENCBK123
M59 - orange
GR-KUTENCOR123
KX91 - black
GR-KUEENCBK100
KX121 - black
GR- KUEENCBK100
KX161 - black
GR-KUEENCBK100
CONSTRUCTION
Construction Cab Enclosures
Manufactured by: USA Tractor Cabs
These vinyl tractor cabs are the best-in-class for craftsmanship, materials, and unique features. The cleanable, durable
materials will give you many years of enjoyment. These cabs
come stock as a 4-sided vinyl enclosure with the option of
adding an acrylic windshield and manual/electric wiper!!
STEP 2
STEP 1
Do you want a vinyl
windshield or an acrylic
windshield?
manufacturer - USA Tractor cabs:
4-SIDED SOFT CAB ENCLOSURE
Do you want a manual
wiper or an electric
wiper?
manufacturer - usa tractor cabs:
3-SIDED SOFT CAB ENCLOSURE W/ .25 FRONT ACRYLIC WINDSHIELD AND MANUAL WIPER
VEHICLE TYPE
PART NO.
VEHICLE TYPE
PART NO.
B21
FM-USA21B
B21
FM-USA21BEACHW
B26
FM-USAB26
B26
FM-USAB26EACHW
L35
FM-USAL35
L35
FM-USAL35EACHW
L39
FM-USAL39
L39
FM-USAL39EACHW
L45
FM-USAL45
L45
FM-USAL45EACHW
L48
FM-USAL48
L48
FM-USAL48EACHW
M59
FM-USAM59
M59
FM-USAM59EACHW
U35S
FM-USAU35S
U35S
**not available**
KX913, KX121-3
FM-USAKX913
KX913, KX121-3
**not available**
R520S, R420S
FM-USAR520S
R520S, R420S
FM-USAR420SEACHW
manufacturer - usa tractor cabs:
manufacturer - usa tractor cabs:
3-SIDED SOFT CAB ENCLOSURE W/ .08 FRONT ACRYLIC WINDSHIELD
3-SIDED SOFT CAB ENCLOSURE W/ .25 FRONT ACRYLIC WINDSHIELD AND ELECTRIC WIPER
VEHICLE TYPE
PART NO.
VEHICLE TYPE
PART NO.
B21
FM-USA21BEACNW
B21
FM-USA21BEAC
B26
FM-USAB26EACNW
B26
FM-USAB26EAC
L35
FM-USAL35EACNW
L35
FM-USAL35EAC
L39
FM-USAL39EACNW
L39
FM-USAL39EAC
L45
FM-USAL45EACNW
L45
FM-USAL45EAC
L48
FM-USAL48EACNW
L48
FM-USAL48EAC
M59
FM-USAM59EACNW
M59
FM-USAM59EAC
U35S
FM-USAU35SEACNW
U35S
**not available**
KX913, KX121-3
FM-USAKX913EACNW
KX913, KX121-3
**not available**
R520S, R420S
FM-USAR520SEACNW
R520S, R420S
FM-USAR520SEAC
877.934.2444
45
46
TERMS & CONDITIONS
Acceptance & General Policy:
•
•
•
•
OrangeAftermarket.com only accepts orders from authorized, franchised
Kubota dealers
We do not engage in retail sales and reserve the right to qualify any account seeking to purchase from our print or online catalogs.
All orders are subject to acceptance at Wiedmann Bros. Distributing Co.,
LLC.
Most products are in stock and ready to ship, however some products are
hand made to order, and require extended lead times. Upon ordering, we
will do our best to advise you of any related lead time.
•
•
•
Dealers desiring an open account should request an application form and
allow 7-10 days for processing.
Net 30: Open accounts are due 30 days from shipment.
Interest will be charged on past due balances at a rate not to exceed the
applicable state legal maximum.
All sales are final on discontinued and closeout items.
Accounting:
•
Questions regarding invoices or statements should be directed to our
Accounting Department at: acct@wiedmannbros.com
Freight Program:
•
•
•
•
•
Freight allowance of 3% on the value of shipped goods applies to orders
between $2,500.00 and $7,500.00 shipped to a single USA destination.
Freight charges will be added if applicable and the freight allowance
deducted on the invoice
Freight allowance of 4% on value of shipped goods applies to orders
$7500,00 or over shipped to a single USA destination. Freight charges will
be added if applicable and the freight allowance deducted on the invoice
Please advise if you would like to use your own carrier
F.O.B. Los Angeles, CA or vendor direct ship applies on all net orders less
the $2,500.00
Orders shipped directly to consumers may be charged a drop ship fee of
10% of the cost of the products
Service:
•
•
Prompt service is of primary consideration.
Every effort will be made to ship your order in the fastest & most
economical methods
•
Returns:
•
•
•
•
•
•
•
•
•
•
•
•
All prices are subject to change without notice
Prices do not include any special handling charges
Materials and specifications for all products are subject to change without
notice
All prices quoted are US Dollars
•
•
•
•
•
A minimum order of $50 net is required
All net orders less the $50.00 may be assessed a $5.00 processing fee
Cancellation Policy:
•
•
•
An OrangeAftermarket.com/Wiedmann Bros Return Merchandise
Authorization (RMA#) number must accompany all returns. Do not
return merchandise without a Return Merchandise Authorization.
Products returned without a RMA# will be held or refused and directed
back to the dealer
Returns must be shipped according to the instructions of a Wiedmann
Bros. customer service representative
The Wiedmann Bros invoice number and the date the product was
purchased must accompany all returns
Shortage claims against any purchase order will be considered only if
reported within seventy-two (72) hours of receipt of merchandise
All defective merchandise must be returned prepaid. If found to be a
manufacturing defect, credit for freight will be issued
Any non-custom product approved for return as a “customer
convenience return” is subject to a 15% restocking charge and must
be accompanied by an order of equal or greater value. The returned
merchandise must also be re-sellable
Damaged or used products not subject to warranty will be returned to
the dealer freight collect
Closeout and discontinued products will not be accepted for return or
credit unless they were mis-shipped or covered by warranty
Packages received without meeting the above guidelines will be
refused and returned unopened
Used fuel containers cannot be returned due to hazardous waste
restrictions
Custom soft goods are not returnable
Items returned in new condition with marked or damaged packaging
that is not saleable will be subject to a repackaging fee of up to 35%
Disclaimer:
Minimum Order:
•
•
All items are warrantied directly by the manufacturer.
All warranty items must be returned directly to the manufacturer
(not Wiedmann Bros.) after having obtained a RMA number from that
manufacturer.
Wiedmann Bros. will not deviate from this printed program
Anything agreed upon that is not documented on this program will not
be honored by Wiedmann Bros.
Any additions or changes will require a revised program sheet.
General Provisions:
Prices:
•
•
•
•
•
•
Terms:
•
Manufacturer’s Direct Warranty:
Orders for in-stock items can be cancelled for any reason prior to shipping
Shipped items are subject to a 15% restocking fee, and applicable shipping
charges
Custom soft goods can be cancelled within 48 hours of receipt of purchase
order
•
•
•
These terms govern all our sales and may not be changed except
with our written consent. Failure to return goods within 30 days
of invoice date shall constitute acceptance by you of these terms,
notwithstanding contrary terms in any purchase order submitted to
Wiedmann Bros.
(b) Wiedmann Bros. makes no warranty as to the products distributed
by us, express or implied, including without limitation any warranties or
merchantability and fitness for a particular purpose. Wiedmann Bros.
will however, pass on all warranties made by the manufacturer, who has
sole responsibility for performing such warranties. If a Dealer returns an
item to Wiedmann Bros. for warranty issues and the item is warranted
directly by the manufacturer, the item will be returned to the Dealer.
The manufacturer shall be solely responsible for any damage to person
or property arising from the design, manufacture and testing of its
products, and Wiedmann Bros. accepts no liability for such damages.
Wiedmann Bros. shall not be liable for indirect of consequential
damages.
If legal action is used to collect a past due account, the prevailing party
shall be entitled to its attorney’s fees and costs in addition to any other
relief it may receive.
Wiedmann Bros. Distributing Co. and OrangeAftermarket assume no liability for errors in part numbers, pricing, listings, model applications
or specifications. We reserve the right to change product quality, descriptions, specifications, prices and applications
at any time without notice and with no further obligation.
THE REPRODUCTION OF ANY MATERIAL FROM THIS CATALOG IS FORBIDDEN WITHOUT THE WRITTEN CONSENT OF
WIEDMANN BROS. DISTRIBUTING CO., LLC
877.934.2444
47