SLIP PERMANENT MAGNET GENERATOR This novel generator does away with cumbersome gear boxes and electrical converters by relying on electrical machines to produce a direct drive system that is directly connected to the grid. Brief Description A Permanent Magnet Generator (PMG) alleviates the need for heavy gearboxes and expensive power electronic converters in conventional wind energy conversion systems. PMG utilises the electrical specific advantages of IM (induction motor) and PM (permanent magnet) electrical machines, resulting in a direct drive system that is directly connected to the grid and is less complex and more cost effective than conventional systems. The generator is capable of operating as a PMG or as a normal synchronous generator by simply removing the induction machine section. Target Market At present the target market is small-scale wind-generating systems with an output of 50 kW and lower. If the technology is a success at this level, implementation at higher power levels will be investigated. Value proposition/ Benefits The invention offers a simplified, but efficient wind generating system which reduces the overall costs of wind energy conversion systems. Unique Characteristics PMG does not require a gearbox or power electronic converter. S-PMG also introduces the modular slip concept. Technical Description The PMG of the invention introduces a slip modular concept which omits the need for a gearbox and power electronic converter, thus resulting in a direct drive system which is directly connected to the grid. The mechanical design of the machine follows a modular, separable approach with an induction machine mounted on a synchronous machine in such a way that they may be separated again if required. Innovation Status A national phase application has been filed for this invention. Principal researchers Prof MJ Kamper Mr JHJ Potgieter Mr JN Stander Department of Electrical and Electronic Engineering at Stellenbosch University Innovus Technology Transfer (PTY) Ltd is Stellenbosch University's wholly-owned technology transfer company. Contact Anita Nel, Innovus Chief Executive Officer, on (021) 808 3826 or send an email to ajnel@sun.ac.za for more information.