FlexWave Active DAS Integration Panel (AIP)
The Active DAS Integration Panel provides a structured component interface
between the RF source and DAS host units. A single Active DAS Integration
Panel supports up to 8 base station TX/RX inputs. The Active DAS Integration
Panel contains all required RF components, thus reducing installation
complexity and labor costs. The Active DAS Integration Panel is compatible
with InterReach Fusion, InterReach Spectrum and Flexwave Prism products.
PRODUCT HIGHLIGHTS
• Supports up to 8 base station TX/RX Inputs
• Input Range 0.25W to 100W
• Remote control and monitoring via web
• Monitors UL & DL power levels
• Supports ALC in DL path with user configured
alarm threshold and automatic attenuation
• Combiner/Splitter tray can be field re-configured
• Diagnostic tone for commissioning, self-mapping & troubleshooting
• CW tone tunable across the passband
• Supports IPv4 and IPv6
• Ability to address up to 32 chassis with one IP address
• Meets NEBS carrier grade level 1 Requirements
FlexWave Active DAS Integration Panel (AIP)
RF PERFORMANCE SPECIFICATIONS
The RF modules are band specific, plug-in and hot-swappable
Frequency and bands supported:
E-UTRA Band/Other
Downlink (TX) Frequency (MHz)
Uplink (RX) Frequency (MHz)
869-894
824-849
Band 25 (1900 PCS)
1930-1995
1850-1915
Band 4 (2100 AWS)
2110-2155
1710-1755
Band 12 (700 ABC)
728-746
698-716
Band 13 (700 UC)
746-757
776-787
iDEN800
851-869
806-824
Band 5 (850 Cell)
Passband Ripple (TX and RX): <2dB over temperature range
PIM performance: -160dBc @ 2X43dBm (-117dBm @ 2X43dBm)
Input power range: 0.25 to 100Watts RMS composite power
Overpower protection: DAS interrupts RF path for input power >100Watts over 5 seconds
Downlink Gain range: -75 to -5dB
Power balancing:
Supports user settable downlink ALC thresholds for power balancing
neutral host arrangements
Uplink Gain Range: -30 to 0dB
Input Return loss: 18dB
Output Return loss: 14dB
Input Supply Voltage:-48VDC
SOFTWARE SPECIFICATIONS
• Controls and monitors up to 32 cascaded AIPs
• Cascading allows for the use of one IP address with a single connection to the NOC
• AIP software is not integrated with the DAS software for integrated system management
• Supports IPv4 and IPv6
• Supports remote software updates
• Provides remote downlink and uplink gain control
• Monitors uplink and downlink power levels
• Provides user settable thresholds for under and over power alarms
2
www.te.com/WirelessSolutions 1-800-366-3891 11/13 316741AE
FlexWave Active DAS Integration Panel (AIP)
COMBINER SPLITTER UNIT’S (CSUs) COMBINE AND SIMULCAST SPLIT CONFIGURATIONS
• Houses passive power dividers for combining up to four band specific RF modules and splitting up to four different zones
• Four standard configurations offered
• Plug-in design supports reconfiguration of the CSU in the field.
• RF power detectors located at the CSU’s output and diagnostic tones in the
RF modules aid in trouble shooting, and commissioning
Slot 7
Slot 6
Blind-Mate
Slot 8
Configuration 2 (AIP-CSU-2)
BIU
Slot #s
Slot 8
Port 7
Slot 7
Port 6
Slot 6
2x1
Terminated
CSU
UL/DL
Port #s
Port 8
Terminated
Port 7
Port 6
2x1
Slot 5
Port 5
Slot 5
Slot 4
Port 4
Slot 4
Port 4
Slot 3
Port 3
Slot 3
Port 3
Slot 2
Port 2
Slot 2
Port 2
Slot 1
Port 1
Slot 1
Port 1
CSU
UL/DL
Port #s
BIU
Slot #s
Terminated
Port 8
Slot 8
Terminated
Port 7
Slot 7
Port 6
Slot 6
Port 5
Slot 5
Port 5
Terminated
Port 4
Slot 4
Port 4
Terminated
Port 3
Slot 3
Port 3
Slot 2
Port 2
Slot 2
Port 2
Slot 1
Port 1
Slot 1
Port 1
Slot 7
Slot 6
Blind-Mate
Slot 8
3x1
Slot 5
Slot 4
Slot 3
3x1
Port 5
Configuration 4 (AIP-CSU-4)
Blind-Mate
Configuration 3 (AIP-CSU-3)
BIU
Slot #s
3
CSU
UL/DL
Port #s
Port 8
Blind-Mate
Configuration 1 (AIP-CSU-1)
BIU
Slot #s
4x1
www.te.com/WirelessSolutions 1-800-366-3891 11/13 316741AE
CSU
UL/DL
Port #s
Terminated
Port 8
Terminated
Port 7
Terminated
Port 6
FlexWave Active DAS Integration Panel (AIP)
SPECIFICATIONS
DIMENSIONS
Height x Width x Depth:
10.5''x19''x20'' (267 mm x 483 mm x 508 mm); 6U
WEIGHT:
Fully loaded AIP (with 8 RF modules): Chassis and control module: RF module: CSU: 123.5 lb (56.0 kg)
34 lb (15.4 kg)
9.5 lb (4.3 kg) ea.
13.5 lb (6.1 kg)
ENVIRONMENTAL
Operating Temperature: Non-Operating Temperature: Operating Humidity: 0° to +45° C
-20° to +85° C
5 to 95%
PHYSICAL CONNECTIONS
BTS Interface (Tx/Rx):
7/16 DIN female
BTS Interface (Sample Port/Rx):
QMA female
DAS Interface (Tx/Rx):
QMA female
Expansion 1 and Expansion 2:RJ45
(for cascading multiple AIPs)
Craft:RJ45
Admin/LAN:RJ45
(for control and monitoring)
DC Input Supply Voltage:
4-position plugable terminal block and accompanying plug
ORDERING INFORMATION
Description
Part Number
Description
Part Number
Chassis
AIP-HU-1
RF Module, 700UC
AIP-BIU700UC-1
Control Unit
AIP-CU-1
RF Module, 800 MHz
AIP-BIU800-1
Split/Comb Tray, Config1
AIP-CSU-1
RF Module, 850MHz
AIP-BIU850-1
Split/Comb Tray, Config2
AIP-CSU-2
RF Module, 1900MHz
AIP-BIU1900-1
Split/Comb Tray, Config3
AIP-CSU-3
RF Module, 2100MHz
AIP-BIUAWS-1
Split/Comb Tray, Config4
AIP-CSU-4
RF Module, Dummy
AIP-BIUDUMMY-1
RF Module, 700ABC
AIP-BIU700ABC-1
RF Module, Blank
AIP-BIUBLANK-1
DATA SHEET
Contact us:
P.O. Box 1101
Minneapolis, Minnesota
USA 55440-1101
Tel: 1-800-366-3891
Fax: 1-952-917-3237
www.te.com/WirelessSolutions
TE Connectivity, TE connectivity (logo), Tyco Electronics, and TE (logo) are trademarks of the TE Connectivity Ltd. family of companies
and its licensors. All other logos, products and/or company names referred to herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed
to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection
with its use. TE Connectivity's obligations shall only be as set forth in TE Connectivity's Standard Terms and Conditions of Sale for this
product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale,
use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each
such product for the specific application.
Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
316741AE 1/14 Revision © 2014, 2013