รายชื่อเอกสารมาตรฐานภาษาอังกฤษ
(Standard Publication)
ที่ไดรับบริจาคของหอสมุดคุณหญิงหลงฯ
รายชื่อเหลานี้ไมมีในฐานขอมูลของหอสมุดคุณหญิงหลงฯ
กรุณาตรวจสอบรายการที่ตองการกับรายชื่อนี้
ตัวเลมจัดเรียงลําดับตามเลชเรียกหนังสือ
ตัวเลมจัดเรียงตามเลขเรียกหนังสือ
ตูจัดเก็บตั้งอยูหนาหอง scan ที่อาคารใหมชั้น 1
2
เลขเรียกหนังสือ
ANSI/IEEE C37.2-1979
ANSI/IEEE C37.5-1979
ANSI/IEEE C37.09-1979
ANSI/IEEE C37.13-1981
ANSI/IEEE C37.14-1979
ANSI/IEEE C37.18-1979
ANSI/IEEE C37.37-1979
ANSI/IEEE C37.97-1979
ANSI/IEEE C37.99-1980
ANSI/IEEE C57.12.01-1979
ANSI/IEEE C57.12.11-1980
ANSI/IEEE C57.12.12-1980
ANSI/IEEE C57.12.91-1979
BS 0.PT2.1974
BS 0.PT3.1974
BS4.PT2.1969
BS18.PT4.1971
BS21.1973
ชื่อเรื่อง
An American National A Standard IEEE Standard Electrical Power System Device
Function Numbers
An American National A Standard IEEE Guide for Application of AC High-Voltage
Circuit Breakers Rated on a Total Current Basis
An American National A Standard IEEE Test for Procedure for AC High-Voltage
Circuit Breakers Rated on a Symmetrical Current Basis
An American National A Standard IEEE Standard for Low-Voltage AC Power
Circuit Breakers Used in Enclosures
An American National A Standard IEEE for Low-Voltage DC Power Circuit
Breakers Used in Enclosures
An American National A Standard IEEE Enclosures Field Discharge Circuit
Breakers for Rotating Electric Machinery
An American National A Standard Loading Guide for AC High-Voltage Air
Switches
An American National A Standard IEEE Guide for Protective Relay Applications to
Power System Buses
An American National A Standard IEEE Guide for Protection of Shunt Capacitor
Banks
An American National A Standard IEEE Guide Standard General Requirements for
Dry-Type Distribution and Power Transformers
An American National A Standard IEEE Guide for Installation of Oil-Immersed
Transformers
An American National A Standard IEEE Guide for Installation of Oil-Immersed
Transformers EHV Transformers 345 kV and Above
An American National A Standard IEEE Standard Test Code for Dry-Type
Distribution and Power Transformers
A Standard for Standards :Part 2: The Drafting of British Standards
A Standard for Standards :Part 3: BSI Committee Organization and Procedures
Specification for Structural Steel Sections :Part 2: Hot-rolled Sections
Methods for Tensile Testing of Metals :Part 4: Steel Tubes
Specification for Pipe Threads for tubes and Fittings where Pressure-tight Joints are
made on the Threads
3
BS41.1973
BS46.PT1.1958
BS61.1969
BS65&540.PT1.1970
BS65&540.PT2.1972
BS77.1958
BS78.PT2.1965
BS115.1954
BS131.PT1.1961
BS131.PT2.1972
BS131.PT3.1972
BS131.PT4.1972
BS131.PT5.1965
BS143&1256.1968
BS153.PT 3a.1972
BS153.PT3B&4.1972
BS153.PT 1&2.1972
BS162.1961
BS183.1972
BS188.1977
BS236.1968
BS240.PT1.1962
BS240.PT2.1964
BS302.1968
BS308.PT1.1972
Specification for Cast Iron Spigot and Socket Flue or smokes Pipes and fittings
Keys and Keyways
Specification for Threads for Light Gauge Copper Tubes and Fittings
Specification for Clay Drain and Sewer Pipes Including Surface Water Pipes and
Fittings :Part 1: Pipes and Fittings
Specification for Clay Drain and Sewer Pipes Including Surface Water Pipes and
Fittings :Part 2: Flexible Mechanical Joints
Voltages for A.C. Transmission and Distribution Systems
Specification for cast Iron Spigot and Socket Pipes (Vertically Cast) and Spigot and
Socket Fittings :Part 2: Fittings
Metallic Resistance Materials for Electrical Purposes
Methods for Notched Bar Tests :Part 1: The Izod Impact Test on Metals
Methods for Notched Bar Tests :Part 2: The Charpy V-notch Impact Test on Metals
Methods for Notched Bar Tests :Part 3: The Charpy U-notch Impact Test on Metals
Methods for Notched Bar Tests :Part 4: Calibration of Pendulum Impact Testing
machines for Metals
Methods for Notched Bar Tests :Part 5: Determination of Crystallinity
Specification for Malleable Cast Iron & Cast Copper Alloy Screwed Pipe Fittings
For Seam, Air, Water, Gas and Oil
Specification for Steel Girder Bridges :Part 3a: Loads
Specification for Steel Girder Bridges :Part 3B: Stresses
:Part 4: Design and Construction
Specification for Steel Girder Bridges :Part 1: Materials and Workmanship
:Part 2: Weighing, Shipping and Erection
Specification for Electric Power Switchgear and Associated Appartus
Specification for General Purpose Galvanized Steel Wire Strand
Methods for Determination of the Viscosity of Liquids
Specification for Stranded Wire Ropes for mine Hoisting (Winding) Purposes
Method for Brinell Hardness Test :Part 1: Testing of Metals
Method for Brinell Hardness Test :Part 2: Verification of the Testing Machine
Specification for Wire Ropes for Crnes, Excavators and General Engineering
Purposes
Engineering Drawing Practice :Part 1: General Principles
4
BS308.PT2.1972
BS308.PT3.1972
BS341.PT1.1962
BS341.PT2.1963
BS350.PT1.1974
BS350.PT2.1962
BS365.1968
BS373.1957
BS410.1976
BS416.1973
BS417.PT1.1964
BS417.PT2.1973
BS427.PT1.1961
BS427.PT2.1962
BS430.1960
BS436.PT1.1967
BS436.PT2.1970
BS437.19778
BS461.1970
BS462.PT2.1969
BS463.1958
BS463.PT2.1970
BS464.1958
BS470.1967
BS473,550.PT1.1967
BS473,550.PT2.1967
Engineering Drawing Practice :Part 2: Dimensioning and Tolerncing of Size
Engineering Drawing Practice :Part 3: Geometrical Tolerancing
Specification for Valve Fittings for Compressed Gas Cylinders :Part 1: Valves with
Stems (Excluding Valves used for Breathing and Medical Purposes)
Specification for Valve Fittings for Compressed Gas Cylinders :Part 2: Valves with
Stems for use with Breathing Appartus
Conversion Factors and Tables :Part 1: Basis of Tables. Conversion Factors
Conversion Factors and Tables :Part 2: Detailed Conversion Tables
Specification for Galvanized Steel Wire Ropes for Ships
Methods of Testing Small Clear Specimens of Timber
Specification for Test Sieves
Specification for Cast Iron Spigot and Socket Soil, Waste and Ventilating Pipes
(Sand Cast and Spun) and Fittings
Specification for Galvanized Mild Steel Cisterns and Covers Thank and Cylinders
:Part 1: Imperial Units
Specification for Galvanized Mild Steel Cisterns and Covers, Thank and Cylinders
:Part 2: Metric Units
Method for Vickers Hardness Test :Part 1: Testing of Metals
Method for Vickers Hardness Test :Part 2: Verification of the Testing Machine
Specification for Solid Drawn Steel Air Receivers not Intended for Transport
Specification for Spur and Helical Gears :Part 1: Basic Rack form, Pitches and
Accuracy (Diametral Pitch Series)
Specification for Spur and Helical Gears :Part 2: Basic Rack form, Modules and
Accuracy (1 to 50 Metric Module)
Specification for Cast Iron Spigot and Socket Drain Pipes and Fittings
Specification for Bordeaux Connections
Specification for Bull Dog Grips :Part 2: Metric Units
Sockets for wire Ropes :Part 1: Inch Units
Sockets for Sockets for Wire Ropes :Part 2: Metric Units
Thimbles for Wire Ropes
Access and Inspection Openings
Specification for Concrete Roofing Tiles and Fittings :Part 1: Imperial Units
Specification for Concrete Roofing Tiles and Fittings :Part 2: Metric Units
5
BS490.PT1.1972
BS490.PT2.1975
BS449.PT1.1970
BS449.PT2.1969
BS499.PT2.1965
BS499.PT3.1965
BS505.1971
BS525.1973
BS526.1961
BS534.1966
BS599.1966
BS600.1935
BS643.1967
BS679.1959
BS709.1971
BS715.1970
BS721.1963
BS749.1969
BS752.1974
BS759.1975
BS765.1961
BS778.1966
BS779.1976
BS791.1975
BS799.PT2.1964
Specification for Conveyor and Elevator Belting :Part 1: Rubber and plastics
Conveyor Belting of Textile Construction for General Use
Specification for Conveyor and Elevator Belting :Part 1: Rubber and plastics
Belting of Textile Construction for on Bucket Elevators
Recommendations for Design (Extracted from the final Report of the Steel Structure
Research Committee 1963, and Reprinted by Permission of H.M. Stationery Office)
Specification for The use of Cold Formed Steel Sections in Building :Part 2: Metric
Units
Welding Terms and Symbols :Part 2: Symbols for Welding
Welding Terms and Symbols :Part 3: Terminology of and Abbreviations for Fusion
Weld Imperfections as Revealed by Radiography
Specification for Road Traffic Signals
Specification for Fibre Cores for Wire Ropes
Definitions of the Calorific Value of Fuels
Specification for Steel Pipes, Fittings and Specials for Water, Gas and Sewage
Methods of Testing Pumps
The Application of Statistical Methods to Industrial Standardization and Quality
Control
Specification for White Metal Ingots for Capping Steel Wire Rops
Filters for use During Welding and Similar Industrial Operations
Methods of Testing Fusion Welded Joints and Weld Metal in Steel
Specification for Sheet Metal Flue Pipes and Accessories for Gas Fired Appliances
Specification for Worm Gearing
Underfeed Stokers
Test Code for Acceptance of Steam Turbines
Specification for Valves, Gauges and Other Safety Fittings for Application to
Boilers to Piping Installation for and in Connection With Boilers
Specification for Internal Combustion Engines Spark Ignition Type
Specification for Steel Pipes and Joints for Hydraulic Purposes
Specification Cast Iron Boilers for Central Heating and Indirect Hot water Supply
(44 KW Rating and Above)
Specification for Solid-Stem Calorimeter Thermometers
Specification for Oil Burning Equipment :Part 2: Vaporizing Burners and Associate
6
BS799.PT3.1970
BS799.PT4.1972
BS799.PT5.1975
BS806.1975
BS835.1973
BS845.1972
BS848.PT1.1963
BS848.PT2.1966
BS853.PT1.1960
BS853.PT2.1960
BS855.1976
BS860.1967
BS864.PT3.1975
BS864.PT2.1971
BS873.PT1.1970
BS873.PT2.1973
BS873.PT231970
BS873.PT4.1973
BS874.1973
Equipment
Specification for Oil Burning Equipment :Part 3: Automatic and Semi-automatic
Atomizing Burners up to 36 liters per hour and Associate Equipment
Specification for Oil Burning Equipment :Part 4: Atomizing Burners Over 36 liters
per hour and Associated Equipment for Single Burner and Multi Burner Installation
Specification for Oil Burning Equipment :Part 5: Oil Storage Tanks
Specification for Ferrous Pipes and Piping Installation for and in Connection With
Land Boilers
Specification for Asbestos-Cement Flue Pipes and Fitting, Heavy Quality
Acceptance Tests for Industrial Type Boilers and Steam Generators
Methods of Testing Fans for General Purposes :Part 1: Performance
Methods of Testing Fans for General Purposes :Part 2: Fan Noise Testing
Specification for Calorifiers for Central Heating and Hot Water Supply :Part 1: Mild
Steel and Cast Iron
Specification for Calorifiers for Central Heating and Hot Water Supply :Part 2:
Copper
Specification Welded Steel Boilers for Central Heating and Indirect Hot Water
Supply (Rated Output 44 KW to 3 MW)
Tables for Comparison of Hardness Scales
Specification for Capillary and Compression Tube Fittings of Copper and Copper
Alloy :Part 3: Compression Fittings Polyethylene Pipes
Specification for Capillary and Compression Tube Fittings of Copper and Copper
Alloy :Part 4: Metric Units
Specification for The Construction of Road Traffic Sings and Internally Illuminated
Bollards :Part 1: Genera Traffic signs
Specification for The Construction of Road Traffic Sings and Internally Illuminated
Bollards :Part 2: Miscellaneous
Specification for The Construction of Road Traffic Sings and Internally Illuminated
Bollards :Part 3: Internaly Bollards
Specification for The Construction of Road Traffic Sings and Internally Illuminated
Bollards :Part 4: Road Studs
Methods for Determining Thermal Insulating Properties With Definitions of
Thermal Insulation Terms
7
BS879.1965
BS891.PT1.1962
BS891.PT2.1964
BS893.1978
BS903.PT A1.1971
BS903.PT A2.1971
BS903.PT A3.1971
BS903.PT A4.1971
BS903.PT A5.1971
BS903.PT A6.1971
BS903.PT A9.1971
BS903.PT A10.1971
BS903.PT A14.1971
BS903.PT A15.1971
BS903.PT A26.1971
BS903.PT A31.1971
BS978.PT1.1968
BS978.PT2.1952
BS978.PT3.1952
BS978.PT5.1968
BS999.1962
BS1000(8) 1971
BS1000(686) 1971
Specification for Water Well Casing
Methods for Rockwell Hardness Test :Part 1: Testing of Metals
Methods for Rockwell Hardness Test :Part 2: Verification of the Testing Machine
Measurement of the Concentration of Particulate Material in Ducts Carrying Gasses
Methods of Testing Vulcanized Rubber :Part A1: Determination of Density
Methods of Testing Vulcanized Rubber :Part A2: Determination of Tensile StressStrain Properties
Methods of Testing Vulcanized Rubber :Part A13 Determination of Tear Strength
(Crescent Test Piece)
Methods of Testing Vulcanized Rubber :Part A4: Determination of Compression
Stress-Strain
Methods of Testing Vulcanized Rubber :Part A5: Determination of Tension Set
Methods of Testing Vulcanized Rubber :Part A6: Determination of Compression
Set After Constant Strain
Methods of Testing Vulcanized Rubber :Part A9: Determination of Abrasion
Resistance
Methods of Testing Vulcanized Rubber :Part A10: Determination of Resistance to
Flex Cracking (De Mattia-Type Machine)
Methods of Testing Vulcanized Rubber :Part A14: Determination of Modulus in
Shear of Rubber (Bonded Quadruple Shear Test Piece)
Methods of Testing Vulcanized Rubber :Part A15: Determination of Creep and
Stress Relaxation
Methods of Testing Vulcanized Rubber :Part A26: Determination of Hardness
Methods of Testing Vulcanized Rubber :Part A31: Determination of the LowFrequency Dynamic Properties of Rubbers by Means of a Torsion Pendulum
Specification for Fine Pitch Gears :Part 1: Involute Spur and Helical Gears
Gears for Instruments and Clockwork Mechanisms :Part 2: Cycloidal Type Gears
Gears for Instruments and Clockwork Mechanisms :Part 3: Bevel Gears
Specification for Fine Pitch Gears :Part 5: Hobs and Cutters
Schedule of Tests for Coke Ovens
Universal Decimal Classification English Full Edition Fourth International Edition
(FID Publication No. 179) UDC 8 Language . Linguistics Literature
Universal Decimal Classification English Full Edition Fourth International Edition
8
BS1000621/621.0) 1973
BS1010.PT2.1973
BS1014.1975
BS1016.PT1.1973
BS1016.PT2.1973
BS1016.PT3.1973
BS1016.PT4.1973
BS1016.PT5.1977
BS1016.PT6.1977
BS1016.PT7.1977
BS1016.PT8.1977
BS1016.PT9.1977
BS1016.PT10.1977
BS1016.PT11.1977
BS1016.PT12.1959
BS1016.PT13.1969
BS1016.PT14.1963
BS1016.PT15.1970
BS1016.PT16.1971
BS1017.PT1.1977
BS1017.PT2.1960
BS1041.PT3.1969
BS1041.PT4.1966
(FID Publication No. 179) UDC 686 Bookbinding . Metallizing Mirror Making .
Stationery
Universal Decimal Classification English Full Edition Fourth International Edition
(FID Publication No. 179) UDC 621/621.0 Mechanical Engineering in General.
Nuclear Technology
Specification for Draw-off Taps and Stopvalves for Water Services (Screw-Down
Pattern) :Part 2: Draw-off Taps and Above-Ground Stopvalves
Specification for Pigments for Portland Cement and Portland Cement Products
The Analysis and Testing of Cold and Coke :part 1: Total Moisture of Coal
The Analysis and Testing of Cold and Coke :part 2: Total Moisture of Coke
The Analysis and Testing of Cold and Coke :part 3: Proximate Analysis of Coal
The Analysis and Testing of Cold and Coke :part 4: Moisture, Volatile Matter and
Ash in the Analysis Sample of Coke
The Analysis and Testing of Cold and Coke :part 5: Gross Calorific Value of Coal
and Coke
The Analysis and Testing of Cold and Coke :part 6: Ultimate Analysis of Coal
The Analysis and Testing of Cold and Coke :part 7: Ultimate Analysis of Coke
The Analysis and Testing of Cold and Coke :part 8: Chlorine in coal and Coke
The Analysis and Testing of Cold and Coke :part 9: Phosphorus in Coal and Coke
The Analysis and Testing of Cold and Coke :part 10: Arsenic in Coal and coke
The Analysis and Testing of Cold and Coke :part 11: Forms of Sulphur in Coal
The Analysis and Testing of Cold and Coke :part 12: Caking and Swelling
Properties of Coal
The Analysis and Testing of Cold and Coke :part 13: Tests Special to Cooke
The Analysis and Testing of Cold and Coke :part 14: Analysis of Coal Ash and
Coke Ash
The Analysis and Testing of Cold and Coke :part 15: Fusibility of Coal Ash and
Coke Ash
The Analysis and Testing of Cold and Coke :part 16: Reporting of Results
Methods for Sampling of Coal and Coke :Part 1: Sampling of Coal
The Sampling of Coal and Coke :Part 2: Sampling of Coke
Code for Temperature Measurement :Part 3: Industrial Resistance Thermometry
Code for Temperature Measurement :Part 4: Thermocouples
9
BS1041.PT5.1972
BS1041.PT7.1964
BS1042.PT1.1964
BS1042.PT2A.1973
BS1042.PT3.1965
BS1054.1975
BS1091.1963
BS1101.1977
BS1113.1969
BS1123.1976
BS1134.PT1.1972
BS1134.PT2.1972
BS1139.1964
BS1170.1968
BS1179.1967
BS1181.1971
BS1184.1976
BS1198,1199 and 1200.1976
BS1212.PT1.1953
BS1212.PT2.1970
BS1219.1958
BS1219M.1961
BS1289.1975
BS1293&2074.1965
Code for Temperature Measurement :Part 5: Radiation Pyrometers
Code for Temperature Measurement :Part 7: Temperature/Time Indicators
Methods for the Measurement of Fluid Flow in Pipes
Methods for the Measurement of Fluid Flow in Pipes :Part 2A: Pitot Tubes 2A.
Class A Accuracy
Methods for the Measurement of Fluid Flow in Pipes :Part 3: Guide to the Effects of
Departure from the Methods in Part 1
Specification for Engineers Comparators for External Measurement
Specification for Pressed Steel Gutters Rainwater Pipes Fitting and Accessories
Specification for Pressure Containers for Paint and Other Substances
Specification for Water-Tube Steam Generating Plant (Including Superheaters,
Reheaters and Steel Tube Economisers )
Specification for Safety Valves, Gauges and Other Safety fittings for Air Receivers
and Compressed Air Installations
Methods for the Assessment of Surface Texture :Part 1: Methods and
Instrumentation
Methods for the Assessment of Surface Texture :Part 2: General Information and
Guidance
Specification for Metal Scaffolding
Methods for Treatment of Water for Marine Boilers
Glossary of Terms used in the Gas Industry
Specification for Clay Flue Linings and Flue Terminals
Specification Copper and Copper Alloy Traps
Specification for Building Sands from Natural Sources
BALLVALVES (Excluding Floats) :Part 1: Piston Type
BALLVALVES (Excluding Floats) :Part 2: Diaphragm Type (Brass Body)
Recommendations for Preparation of Mathematical Copy and Correction of
Mathematical Proofs
Preparation of Mathematical Copy and Correction of Proofs (Extracted from B.S.
1219:1958)
Specification for Precast Concrete Flue Blocks for Domestic Gas Appliances
Methods for the Size Analysis of Coal and Coke
10
BS1294.1964
BS1296.PT3.1978
BS1306.1975
BS1313.1947
BS1328.1969
BS1339.1965
BS1340.1960
BS1342.1962
BS1343.1962
BS1347.PT1.1956
BS1347.PT2.1956
BS1365.1975
BS1374.1972
BS1387.1967
BS1394.PT1.1971
BS1394.PT2.1971
BS1414.1975
BS1415.PT1.1976
BS1427.1962
BS1431.1960
BS1440.1971
BS1469.1962
BS1500.PT3.1965
BS1501.PT1.1964
BS1501.PT2.1970
Soot Doors for Domestic Buildings
Specification for Single Point Cutting Tools :Part 3: Butt-Welded Cutting Tools
and Banks
Specification for Copper and Copper Alloy Pressure Piping Systems
Fraction-Defective Charts for Quality Control
Methods of Sampling Water used in Industry
Definitions, Formulae and Constants Relating to the Humidity of the Air
Specification for Prepared and Natural Tracing Paper
Specification for Detail Drawing Paper
Specification for Cartridge Drawing Paper
Architects, Engineers and Surveyors Scales :Part 1: Boxwood Scales
Architects, Engineers and Surveyors Scales :Part 2: Plastics Scales
Specification for Short-Range Short-Stem Thermometers
Recommendations on the use of British Standard Log Sheets for Steam and Hot
water Boiler Plants
Specification for Steel Tubes and Tubulars Suitable for Screwing to BS 21 Pipe
Threads
Specification for Power Driven Circulators :Part 1: Glanded and Glandless Pumps
Specification for Power Driven Circulators :Part 2: Domestic Glandless Pumps
Specification for Steel Wedge Gate Valves (Flanged and Butt-Welding ends) for the
petroleum, Petrochemical and Allied Industries
Specification for Mixing Valves :Part 1: Non-Thermostatic, Non-Compensating
Mixing Valves
Routine Control Methods of Testing Water used in Industry
Specification for Wrought Copper and Wrought Zinc Rainwater Goods
Specification for Endless V-Belt Drives Sections “ Y ”, “ Z ”, “ A ”, “ B ”, “ C ” and
“D”
Specification for Coal Tar Fuels
Fusion Welded Pressure Vessels for General Purposes :Part 3: Aluminium
Addendum No.4 Published July 1973 to British Standard 1501:Part 1:1964 Steels
for Fired and Unfired Pressure Vessels. Plates :Part 1: Carbon Manganese Steels:
Imperial Units
Addendum No.1 Published July 1973 to British Standard 1501:Part 2:1970 Steels
11
BS1501.PT2.1970
BS1502.1968
BS1502.1968
BS1521.1972
BS1523.1954
BS1523.PT1.1967
BS1553.PT1.1977
BS1553.PT2.1950
BS1553.PT3.1950
BS1564.1975
BS1565.1949
BS1565.pt2.1973
BS1566.PT1.1972
BS1566.PT2.1972
BS1571.PT1.1975
BS1571.PT2.1975
BS1584.1949
BS1586.1964
BS1608.1966
BS1639.1964
BS1641.1950
BS1646.1964
for Fired and Unfired Pressure Vessels. Plates :Part 2: Carbon Manganese Steels:
Imperial Units
Specification for Steels for Fired and Unfired Pressure Vessels. Plates :Part 3:
Corrosion and Heat Resisting Steels. Imperial Units
Specification for Steel and Unfired Pressure Vessels Sections and Bars
Specification for Steel and Unfired Pressure Vessels Forgings
Specification for Waterproof Building Papers
Glossary of Terms used in Automatic Controlling and Regulating Systems : Section
5 : Components of Servo-Mechanisms
Glossary of Terms used in Automatic Controlling and Regulating Systems :Part 1:
Process and Kinetic Control
Specification for Graphical symbols for General Engineering :Part 1: Piping
Systems and Plant
Graphical Symbols for Power Generating Plant
Graphical Symbols for Compressing Plant
Specification for Pressed Steel Sectional Rectangular Tanks
Galvanized Mild Steel Indirect Cylinders Annular or Saddle-Back Type
Galvanized Mild Steel Indirect Cylinders Annular or Saddle-Back Type :Part 2:
Metric Units
Specification for Copper Indirect Cylinders for Domestic Purposes :Part 1: Double
Feed Indirect Cylinders
Specification for Copper Indirect Cylinders for Domestic Purposes :Part 2: Single
Feed Indirect Cylinders
Specification for Testing of Positive Displacement Compressors and Exhausters
:Part 1: Acceptance Tests
Specification for Testing of Positive Displacement Compressors and Exhausters
:Part 2: Simplified Acceptance Tests for Air Compressors and Exhausters
Glossary of terms used in Refrigeration
Methods for the Testing of Refrigerant Condensing Units
Specification for Electrically Driven Refrigerant Condensing Units
Methods for Bend Testing of Metals
Cast Iron Pipe Fittings for Sprinklers and Other Fire Protection Installations
Graphical Symbols for Process Measurement and Control Functions
12
BS1701.1970
BS1704.1951
BS1710.1975
BS1712.1951
BS1713.1951
BS1722.PT1.1972
BS1722.PT2.1973
BS1722.PT3.1973
BS1722.PT4.1972
BS1722.PT5.1972
BS1722.PT6.1972
BS1722.PT7.1972
BS1722.PT8.1978
BS1722.PT9.1963
BS1722.PT10.1972
BS1722.PT11.1972
BS1726.PT1.1964
BS1740.PT1.1971
BS1740.PT2.1971
BS1747.PT1.1969
BS1747.PT2.1969
BS1747.PT3.1969
BS1747.PT4.1969
BS1747.PT5.1972
BS1747.PT1.1971
Specification for Air Filters for Air Supply to Internal Compressors Other Than for
Aircraft
General Purpose Thermometers
Specification for Identification of Pipelines
Cast Iron Economisers With Extended Surface Horizontal Tubes
Cast Iron Smooth Tube Economisers With Pressed Socket Joints
Specification for Fences :Part 1: Chain Link Fences
Specification for Fences :Part 2: Woven Wire Fences
Specification for Fences :Part 3: Strained Wire Fences
Specification for Fences :Part 4: Cleft Chestnut Pale Fences
Specification for Fences :Part 5: Close-Boarded Fences Including Oak Pale Faces
Specification for Fences :Part 6: Wooden Palisade Fences
Specification for Fences :Part 7: Wooden Post and Rail Fences
Specification for Fences :Part 8: Mild Steel (Low Carbon Steel) Continuous Bar
Fences
Specification for Fences :Part 9: Mild Steel or Wrought Iron Unclimbable Fences
With Round or Square Verticals and Flat Standards and Horizontals
Specification for Fences :Part 10: Anti-Intruder Chain Link Fences
Specification for Fences :Part 11: Woven Wood Fences
Guide to the Design & Specification of Coil Springs :Part 1: Helical Compression
Springs
Specification for Wrought Steel Pipe Fittings (Screwed BSP Thread) :Part 1: Metric
Units
Specification for Wrought Steel Pipe Fittings (Screwed BSP Thread) :Part 2:
Imperial Units
Methods for the Measurement of Air Pollution :Part 1: Deposit Gauges
Methods for the Measurement of Air Pollution :Part 2: Determination of
Concentration of Suspended Matter
Methods for the Measurement of Air Pollution :Part 3: Determination of Sulphur
Dioxide
Methods for the Measurement of Air Pollution :Part 4: The Lead Dioxide Method
Methods for the Measurement of Air Pollution :Part 5: Directional Dust Gauges
Methods for the Sampling and Analysis of Flue Gases :Part 1: Methods of Sampling
13
BS1747.PT2.1971
BS1747.PT3.1971
BS1747.PT4.1977
BS1747.PT5.1971
BS1758.1966
BS1775.1964
BS1780.1960
BS1794.1952
BS1846.PT1.1968
BS1846.PT2.1968
BS1873.1975
BS1876.1972
BS1881.1952
BS1881.PT1.1970
BS1881.PT2.1970
BS1881.PT3.1970
BS1881.PT4.1970
BS1881.PT5.1970
BS1881.PT6.1971
BS1902.PT 1A.1966
BS1902.PT 2A.1964
BS1902.PT 1B.1967
Methods for the Sampling and Analysis of Flue Gases :Part 2: Analysis by the Orsat
Apparatus
Methods for the Sampling and Analysis of Flue Gases :Part 3: Analysis by the
Haldane Apparatus
Methods for the Sampling and Analysis of Flue Gases :Part 4: Miscellaneous
Analyses
Methods for the Sampling and Analysis of Flue Gases :Part 5: Semi-Routine
Analyses
Specification for Fireclay Refractories (Bricks and Shapes)
Specification for Steel Tubes for Mechanical, Structural and General Engineering
Purposes
Specification for Bourdon Tube Pressure and Vacuum Gauges
Chart Ranges for Temperature Recording Instruments
Glossary of Terms Relating to Sold Fuel Burning Equipment :Part 1: Domestic
Appliances
Glossary of Terms Relating to Sold Fuel Burning Equipment :Part 2: Industrial
Water Heating and Steam Raising Installations
Specification for Steel Globe and Globe Stop and Check Valves (Flanged and ButtWelding Ends) for the Petroleum, Petrochemical and Allied Industries
Specification for Automatic Flushing Cisterns for Urinals
Testing Concrete
Methods of Testing Concrete :Part 1: Methods of Sampling Fresh Concrete
Methods of Testing Concrete :Part 2: Methods of Testing Fresh Concrete
Methods of Testing Concrete :Part 3: Methods of Making and curing Test
Specimens
Methods of Testing Concrete :Part 4: Methods of Testing Concrete for Strength
Methods of Testing Concrete :Part 5: Methods of Testing Hardened Concrete for
Other Than Strength
Methods of Testing Concrete :Part 6: Analysis of Hardened Concrete
Methods of Testing Refractory Materials :Part 1A: Sampling and Physical Tests
Methods of Testing Refractory Materials :Part 2A: Chemical Analysis of High
Silica and Aluminosilicats
Methods of Testing Refractory Materials :Part 1B: Basic Refractory Materials
14
BS1902.PT 2B.1967
BS1902.PT 1C.1967
BS1902.PT 2C.1974
BS1902.PT 2D.1969
BS1902.PT 2E.1970
BS1916.PT1.1953
BS1916.PT2.1953
BS1916.PT3.1963
BS1953.1964
BS1965.PT1.1963
BS1968.1953
BS1971.1969
BS1972.1967
BS1984.1967
BS1986.1964
BS1953.1964
BS1991.PT1.1976
BS1991.PT2.1961
BS1991.PT3.1961
BS1991.PT4.1961
BS1991.PT5.1961
Methods of Testing Refractory Materials :Part 2B: Chemical Analysis of Aluminous
Materials
Methods of Testing Refractory Materials :Part 1C: Mouldable and Castable
Refractories
Methods of Testing Refractory Materials :Part 2C: Chemical Analysis of ChromeBearing Materials
Methods of Testing Refractory Materials :Part 2D: Determination of Silica in High
Silica, Aluminosilicate and Aluminous Materials by Coagulation
Methods of Testing Refractory Materials :Part 2E: Chemical Analysis of
Magnesites and Dolomites
Limits and Fits for Engineering :Part 1: Limits and Tolerances
Guide to the Selection of Fits
Limits and Fits for Engineering :Part 3: Recommendation for Tolerances, Limits
and Fits for Large Diameters
Specification for Copper Alloy Check Valves for General Purposes
Specification for Butt-Welding Pipe Fittings for Pressure Purposes :Part 1: Carbon
Steel
Floats for Ballvaves (Copper)
Specification for Corrugated Furnaces for Shell Boilers
Specification for Polythene Pipe (Type 32) for Cold Water Services
Specification for Gravel Aggregates for Surface Treatment (Including Surface
Dressings) on Roads
Specification for Design and Dimensional Features of Measuring and Control
Instruments for Industrial Processes
Specification for Copper Alloy Check Valves for General Purposes
Recommendation for Letter Symbols, Signs and Abbreviations :Part 1: General
Recommendation for Letter Symbols, Signs and Abbreviations :Part 2: Chemical
Engineering Nuclear Science and Applied Chemistry
Recommendation for Letter Symbols, Signs and Abbreviations :Part 3: Fluid
Mechanics
Recommendation for Letter Symbols, Signs and Abbreviations :Part 4: Structures,
Materials and Soil Mechanics
Recommendation for Letter Symbols, Signs and Abbreviations :Part 5: Applied
15
BS1991.PT6.1975
BS2002.1973
BS2009.1953
BS2035.1966
BS2051.PT1.1973
BS2052.1977
BS2062.PT1.1959
BS2062.PT2.1960
BS2019.1969
BS2455.PT1.1973
BS2456.1973
BS2459.1974
BS2486.1978
BS2491.1963
BS2499.1973
BS2501.1976
BS2564.1955
BS2519.1955
BS2580.1955
BS2591.PT1.1955
BS2591.PT2.1956
BS2591.PT3.1956
BS2591.PT4.1967
Thermodynamics
Recommendation for Letter Symbols, Signs and Abbreviations :Part 6: Electrical
Science and Engineering
Specification for Dimensions for Diamond Truing Tools
Acceptance Tests for Turbo-Type Compressors and Exhausters
Specification for Cast Iron Flanged Fittings
Specification for Tube and Pipe Fittings for Engineering Purposes :Part 1: Copper
and Copper Alloy Capillary and Compression Tube Fittings for Engineering
Purposes
Specification for Ropes Made from Manila, Sisal, Hemp, Cotton and Coir
Gear Hobs :Part 1: Hobs for General Purposes 1 d.p. to 20 d.p. Inclusive
Gear Hobs :Part 2: Hobs for Turbine Reduction and similar Drives
Specification for Respirators for Protection Against Harmful Dusts and Gases
Methods of Sampling and Examining Deposits from Boilers and Associated
Industrial Plant :Part 1: Water – Side Deposits
Specification for Floats (Plastics) for Ballvalves for Hot and Cold Water
Specification for Set Squares (Fixed and Adjustable) for Drawing Office use
Recommendation for Treatment of Water for Land Boilers
Specification for Domestic Cooking Appliances for use with Liquefied Petroleum
Gases
Specification for Hot Applied Joint Sealant for Concrete Pavements
Specification Commercial Refrigerated Storage Cabinets of the Closes Reach-in
Type
Control Chart Technique when Manufacturing to a Specification
Solid Drawn Copper Alloy Tubes for the Manufacture of Screwed Ferrules for
Condenser, Evaporator, Heater and Cooler Tubes
Underground Plug Cocks for Cold Water Services (Scottish Type)
Glossary for Valves & Valve Parts (for Fluids) :Part 1: Screw – Down Stop, Check
& Gate Valves
Glossary for Valves & Valve Parts (for Fluids) :Part 2: Safety Valves and Relief and
Relief Valves
Glossary for Valves & Valve Parts (for Fluids) :Part 3: Plug Valves and Cocks
Glossary for Valves & Valve Parts (for Fluids) :Part 4: Butterfly Valves
16
BS2591.PT5.1969
BS2600.PT1.1973
BS2626.1975
BS2634.PT1.1974
BS2635.1955
BS2654.1973
BS2655.PT1.1970
BS1691.1969
BS2725.1956
BS2737.1956
BS2740.1969
BS2741.1969
BS2742.1969
BS2754.1976
BS2767.1972
BS2782.PT3.1977
BS2790.PT1.1969
BS2790.PT2.1973
BS2795.PT1.1971
BS2795.PT2.1971
BS2811.1969
BS2831.1971
BS2840.1957
Glossary for Valves & Valve Parts (for Fluids) :Part 5: Ball Valves
Methods for Radiographic Examination of Fusion Welded Butt Joints in Steel :Part
1: 5 mm up to and Including 50 mm Thick
Specification for Lubricating Oils for Refrigerant Compressors
Specification for Roughness Comparison Specimens :Part 1: Turned, Ground,
Bored, Milled, Shaped and Planed
Drafting Specifications Based on Limiting the Number of Defectives Permitted in
Small Samples
Specification for Vertical Steel Welded Storage Thank With Butt – Welded Shells
for the Petroleum Industry
Specification for Lifts, Escalators, Passenger Conveyors and Paternosters :Part 1:
General Requirements for Electric, Hydraulic and Hand – Powered Lifts
Specification for Steel Wire for Prestressed Concrete
Memorandum on the Measurement of Cooling – Medium Temperature
Terminology of Internal Defects in Castings as Revealed by Radiography
Specification for Simple Smoke Alarm Metering Devices
Recommendation for the Construction of Simple Smoke Viewers
Use of the Ringelmann and Miniature Smoke Charts
Memorandum Construction of Electrical Equipment for Protection Against Electric
Shock
Specification for Valves and Unions for Hot Water Radiators
Plastics :Part 3: Mechanical Properties
Specification for Shell Boilers of Welded Construction (Other Than Water – tube
Boilers) :Part 1: Class I Welded Construction
Specification for Shell Boilers of Welded Construction (Other Than Water – tube
Boilers) :Part 2: Class II and Class III Welded Construction
Specification for Dial Test Indicators (Lever Type) for Linear Measurement :Part 1:
Metric Units
Specification for Dial Test Indicators (Lever Type) for Linear Measurement :Part 2:
Imperial Units
Specification for Smoke Density Indicators and Recorders
Methods of the for Air Conditioning and General Ventilation
General Purpose Maximum and Minimum Thermometers (six is Pattern)
17
BS2841.1957
BS2846.PT1.1975
BS2846.PT2.1975
BS2846.PT3.1975
BS2846.PT4.1976
BS2846.PT5.1977
BS2846.PT6.1976
BS2852.1970
BS2856.1973
BS2871.PT1.1971
BS2871.PT2.1972
BS2871.PT3.1972
BS2879.1957
BS2885.1974
BS2910.1973
BS2917.1977
BS3016.1972
BS3048.1958
BS3049.1976
BS3053.1971
General Purpose Wet and Dry Bulb Hygrometer
Guide to Statistical Interpretation of Data :Part 1: Routine Analysis of Quantitative
Data
Guide to Statistical Interpretation of Data :Part 2: Estimation of the Meanconfidence Interval
Guide to Statistical Interpretation of Data :Part 3: Determination of a Statistical
Tolerance Interval
Guide to Statistical Interpretation of Data :Part 4: Techniques of Estimation and
Tests Relating to means and Variances
Guide to Statistical Interpretation of Data :Part 5: Power of Tests Relating to Means
and Variances
Guide to Statistical Interpretation of Data :Part 6: Comparisons of two Means in the
Case of Paired Observations
Specification for Rating and Testing Room Air – Conditioners
Precise Conversion of Inch and Metric Sized on Engineering Drawings
Specification for Copper and Copper Alloys Tubes :Part 1: Copper Tubes for Water,
Gas and Sanitation
Specification for Copper and Copper Alloys Tubes :Part 2: Tubes for General
Purposes
Specification for Copper and Copper Alloys Tubes :Part 3: Tubes for Heat
Exchangers
Draining Taps (Screw – Down Pattern)
Acceptance Tests on Stationary Steam Generators of the Power Station Type
Methods for Radiographic Examination of Fusion Welded Circumferential Butt
Joints in Steel Pipes
Specification for Graphical Symbols used on Diagrams for Fluid Power Systems
and Components
Specification for Pressure Regulators and Automatic Changeover Devices for
Liquefied Petroleum Gases
Code for the Continuous Sampling and Automatic Analysis of Flue Gases:
Indication and Recorders
Specification Pedestrian Guard Rails (Metal)
Specification for Refrigerated Display Cabinets for the Sale of Packaged Frozen
18
BS3056.1973
BS3063.1965
BS3107.1973
BS3019.1959
BS3116.PT4.1974
BS3122.PT1.1977
BS3132.1959
BS3135.1975
BS3142.PT2.1965
BS3142.PT3.1965
BS3144.1968
BS3156.PT1.1968
BS3156.PT121968
BS3156.PT3.1968
BS3156.PT4.1969
BS3156.PT5.1969
BS3170.1972
BS3198.1960
BS3238.PT1.1960
BS3238.PT2.1964
BS3250.PT1.1973
BS3250.PT2.1961
BS3256.1960
BS3274.1960
Foods in Temperate Climates
Specification for Standard Sizes of Fireclay, High Alumina and Basic Refractories
Specification for Dimensions of Gaskets for Pipe Flanges
Specification for Small Incinerators
Gas and Dual-Fuel Engines
Specification for Automatic Fire Alarm Systems in Buildings :Part 4: Control and
Indicating Equipment
Refrigerant Compressors :Part 1: Methods of Test for Performance
Tubular-Framed General Purpose Trolleys for School Catering
Specification for Gas Turbines : Acceptance Tests
Specification for Manufactured Solid Smokeless Fuels for Household Use :Part 2:
Cokes for Domestic Closed Appliances
Specification for Manufactured Solid Smokeless Fuels for Household Use :Part 3:
Specially Reactive Fuels for all Types of Domestic Open Fire
Methods of Sampling and Physical Testing of Leather
Methods for the Analysis of Fuel Gases :Part 1: General Analysis
Methods for the Analysis of Fuel Gases :Part 2: Special Determinations
Methods for the Analysis of Fuel Gases :Part 3: Combustion Characteristics
Methods for the Analysis of Fuel Gases :Part 4: Gas Chromatographic Analysis
Methods for the Analysis of Fuel Gases :Part 5: Techniques for High Pressure Gases
Specification for Flexible Couplings for Power Transmission
Combination Hot Water Storage Units (Copper)
Graphical Symbols for Components of Servo-mechanisms :part 1: Transductors and
Magnetic Amplifiers
Graphical Symbols for Components of Servo-mechanisms :part 2: General ServoMechanisms
Methods for The Thermal Testing of Domestic Solid Fuel Burning Appliances :Part
1: Flue Loss Method
Thermal Testing of Domestic Solid Fuel Burning Appliances With Convection :Part
2: Hood Method
Specification for Small Fusion-Welded Air Reservoirs for Road and Railway
Vehicles
Specification for Tubular Heat Exchangers for General Ptrposes
19
BS3276.1960
BS3285.1960
BS3289.1960
BS3292.1960
BS3316.1973
BS3323.1978
BS3363.1968
BS3380.PT1.1976
BS3402.1969
BS3446.1962
BS3456.PT C.1967
BS3456.PT2.1976
BS3489.1962
BS3490.1972
BS3500.PT1.1969
BS3500.PT3.1969
BS3500.PT5.1969
BS3500.PT6.1969
BS3518.PT1.1962
BS3518.PT2.1962
BS3518.PT3.1962
BS3518.PT4.1963
BS3518.PT5.1966
BS3530.1968
BS3533.1962
BS3552.1962
BS3553.1962
Specification for Thermometers for Measuring Air Cooling Power
Methods of Sampling Superheated Steam from Steam Generating Units
Specification for Conveyor Belting for Underground use in Coal Mines
Specification for Direct Reading Hygrometers
Specification for Large Incinerators for the Destruction of Hospital Waste
Glossary Coal Terms
Schedule of Letter Symbols for Semiconductor Devices
Specification Wastes for Sanitary Appliances and Overflows for Baths :Part 1:
Wastes (Excluding Skeleton Sink Wastes) and Baths Overflows
Specification for Quality of Vitreous China Sanitary Appliances
Glossary of Terms Relating to Refractory Materials
Specification for The Testing and Approval of Domestic Electrical Appliances :Part
C: Electrical Refrigerators and Food Freezers
Specification for Safety of Household Electrical Appliances :Part 2: Particular
Requirements Section 2.34 Room Air Conditioners
Specification for Sound Level Meters (Industrial Grade)
Specification for Sizes of Film for Industrial Radiography and X-ray
Crystallography
Methods for Creep and Rupture Testing of Metals :Part 1: Tensile Rupture Testing
Methods for Creep and Rupture Testing of Metals :Part 3: Tensile Creep Testing
Methods for Creep and Rupture Testing of Metals :Part 5: Tensile Steel Relaxation
Testing
Methods for Creep and Rupture Testing of Metals :Part 6: Tensile Steel Relaxation
Testing
Methods of Fatigue Testing :Part 1: General Principles
Methods of Fatigue Testing :Part 2: Rotating Bending
Methods of Fatigue Testing :Part 3: Direct Stress Fatigue Tests
Methods of Fatigue Testing :Part 4: Torsional Stress Fatigue Tests
Methods of Fatigue Testing :Part 5: Guide to the Application of Statistics
Specification for Small Wire Ropes
Glossary of Terms Relating to Thermal Insulatiion
Glossary of Terms Used in Coal Preparation
Graphical Symbols for Coal Preparation Plant
20
BS3554.PT1.1971
BS3554.PT2.1972
BS3567.1962
BS3572.1962
BS3593.1963
BS3600.1976
BS3601.1974
BS3603.1977
BS3604.1978
BS3605.1973
BS3618.Se 1.1969
BS3618.Se 2.1971
BS3618.Se 3.1971
BS3618.Se 4.1971
BS3641.PT1.1971
BS3641.PT2.1972
BS3680.PT1.1964
BS3680.Pt2A.1964
BS3680.PT2C.1967
BS3680.PT3.1964
Specification for Gas Governors :Part 1: Independent Governors for Inlet Pressures
up to 25 Mbar
Specification for Gas Governors :Part 2: Independent Governors for Inlet Pressures
up to 350 Mbar
Recommendation for Principles & Convention for Flowsheets for Coal Preparation
Plant
Specification for Access Fittings for Chimneys and Other High Structures in
Concrete or Brickwork
Recommendation on Preferred Frequencies for Acoustical Measurements
Specification for Dimensions and Masses Per Unit Length of Welded and Seamless
Steel Pipes and Tubes for Pressure Purposes
Specification for Steel Pipes and Tubes for Pressure Purposes : Carbon Steel With
Specified Room Temperature Properties
Specification for Steel Pipes and Tubes for Pressure Purposes : Carbon and Alloy
Steel With Specified Low Temperature Properties
Specification for Steel Pipes and Tubes for Pressure Purposes : Ferritic Alloy Steel
With Specified Elevated Temperature Properties
Specification for Seamless and Welded Austenitic Stainless Steel Pipes and Tubes
for Pressure Purposes
Glossary of Mining Terms : Section 1 Planning and Surveying
Glossary of Mining Terms : Section 2 Ventilation
Glossary of Mining Terms : Section 3 Boring and Exploration
Glossary of Mining Terms : Section 4 Drainage
Symbols for Machine Tools :Part 1: General Symbols
Symbols for Machine Tools :Part 2: Numerical Control
Methods of Measurement of Liquid Flow in Open Channels :Part 1: Glossary of
Terms
Methods of Measurement of Liquid Flow in Open Channels :Part 2: Dilution
Methods 2A.Constant Rate Injection
Methods of Measurement of Liquid Flow in Open Channels :Part 2: Dilution
Methods 2C.Radioisotope Techniques
Methods of Measurement of Liquid Flow in Open Channels :Part 3: Velocity Area
Methods
21
BS3680.PT4A.1965
BS3680.PT4B.1969
BS3680.PT 4C.1974
BS3680.PT5.1970
BS3680.PT6.1973
BS3680.PT7.1971
BS3680.PT8A.1973
BS3680.PT8B.1973
BS3681.PT2.1973
BS3688.PT1.1963
BS3690.1970
BS3724.1964
BS3730.1964
BS3763.1976
BS3790.1973
BS3800.1964
BS3804.PT1.1964
BS3812.1964
BS3813.PT1.1964
BS3841.1972
Methods of Measurement of Liquid Flow in Open Channels :Part 4: Weirs and
Flumes 4A.Thin Plate Weirs and Venturi Flumes
Methods of Measurement of Liquid Flow in Open Channels :Part 4: Weirs and
Flumes 4B.Long-Base Weirs
Methods of Measurement of Liquid Flow in Open Channels :Part 4: Weirs and
Flumes 4C.Flumes
Methods of Measurement of Liquid Flow in Open Channels :Part 5: Slope Area
Method of Estimation
Methods of Measurement of Liquid Flow in Open Channels :Part 6: Measurement
of Flow in Tidal Channels
Methods of Measurement of Liquid Flow in Open Channels :Part 7: The
Measurement of Liquid Level (Stage)
Methods of Measurement of Liquid Flow in Open Channels :Part 8: Current Meters
8A.Current Meter Incorporating a Rotating Element
Methods of Measurement of Liquid Flow in Open Channels :Part 8: Current Meter
8B.Current Meter : Suspension Equipment
Methods for Sampling and Testing of Lightweight Aggregates for Concrete :Part 2:
Metric Units
Methods for Mechanical Testing of Metals At Elevated Temperatures :Part 1:
Tensile Testing
Specification for Bitumen for Road Purposes
Glossary of Terms Relating to Fibre Ropes and Cordage
Methods for The Assessment of Departures from Roundness
The International System of Units (SI)
Specification for Endless Wedge Belt Drives of SPZ,SPA,SPB and SPC Sections
Methods for Testing the Accuracy of Machine Tools
Methods for Determination of the Calorific Value of Fuel Gases :Part 1: NonRecording Methods
Recommendation for Estimating the Dryness of Saturated Steam
Specification for Incinerators for Waste from Trade and Residential Premises :Part
1: Capacities Between 50 lb/h and 1000 lb/h
Methods for The Measurement of Smoke from Manufactured Solid Fuels for
Domestic Open Fires
22
BS3846.1970
BS3853.1966
BS3855.1965
BS3865.1965
BS3868.1973
BS3948.1965
BS3950.1965
BS3952.1965
BS3954.1973
BS3876.PT1.1965
BS3876.PT2.1965
BS3876.PT3.1965
BS3876.PT4.1966
BS3899.1965
BS3934.1965
BS3934.1965
BS3934.1965
BS3939.1966
BS3939.1970
BS3939.Se 1 to 4.
BS3939.Se 5 & 6
Methods for Calibration and Grading of Extensometers for Testing of Metals
Specification for Mechanical Balancing of Marine Main Turbine Machinery
Methods for Modified Erichsen Cupping Test for Sheet & Strip Metal
Outline Specification for Gas Turbines
Specification for Prefabricated Drainage Stack Units: Galvanized Steel
Specification for Cast Iron Parallel Slide Valves for General Purposes
Specification for Electrical Protective Systems for A.C. Plant
Specification for Cast Iron Butterfly Valves for General Purposes
Specification for Asbestos-Cement Ducts
Specification for Rope Rollers and Mounting for Colliery Track Haulage :Part 1:
Parallel Rollers
Specification for Rope Rollers and Mounting for Colliery Track Haulage :Part 2:
Tapered and Vertical Rollers : Also Vertical and Horizontal Spindle Pulleys
Specification for Rope Rollers and Mounting for Colliery Track Haulage :Part 3:
Rollers With Non-Metallic Rope Bearing Surfaces
Specification for Rope Rollers and Mounting for Colliery Track Haulage :Part 4:
Mountings
Specification for Refrigerated Room Air-Conditioners
Dimensions of Semiconductor Devices : Addendum No.1 December,1967
Dimensions of Semiconductor Devices : Addendum No.2 October, 1971
Dimensions of Semiconductor Devices and Integrated Electronic Circuits :
Addendum No.3 June, 1975
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Introduction
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Guiding Principles
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 1. General Qualifying and Supplementary Symbols
: Section 2. Unclassified Symbols
: Section 3. Conductors and Connecting Device
: Section 4. Resistors
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 5. Capacitors
23
BS3939.Se 9
BS3939.Se 15-19
BS3939.Se 20
BS3939.Se 21
BS3939.Se 22
BS3939.Se 23
BS3939.Se 24
BS3939.Se 25
BS3939.Se 26
BS3939.Se 27
BS3939.Se 28
BS3958.PT1.1970
BS3958.PT2.1970
BS3958.PT3.1967
:Section 6. Inductors, Transformers and Transductors
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 9. Measuring Instruments and Electric Clocks
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 15.Thermionic Valves
:Section 16.Cold Cathode Tubes
:Section 17. Cathode Ray Tubes and Television Camera Tubes
:Section 18. Microwave Tubes
:Section 19. Miscellaneous Tubes and Mercury arc Rectifiers
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 20. Semiconductor Devices
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 21. Binary Logic Elements
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 22. Block Symbols for Telecommunications Transmission and
General Applications
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 23. Microwave Transmission Lines
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 24. Aerials and Radio Stations
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 25. Frequency Spectrum Diagrams
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 26. Symbols for Topographical Diagrams
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Symbols for Architectural and Diagrams
Graphical Symbols for Electrical Power Telecommunication and Electronics
Diagrams : Section 28. Symbols Peculiar to Electric Traction Diagrams
Specification for Thermal Insulating Materials :Part 1: 85% Magnesia Preformed
Insulation
Specification for Thermal Insulating Materials :Part 2: Calcium Silicate Preformed
Insulation
Specification for Thermal Insulating Materials :Part 3: Metal Mesh Faced Mineral
24
BS3958.PT4.1968
BS3958.PT5.1967
BS3958.PT6.1972
BS3961.1965
BS3971.1966
BS3999.PT131976
BS4019.PT1.1974
BS4019.PT2.1973
BS4048.PT1&2.1966
BS4074.1965
BS4076.1978
BS4080.1966
BS4082.PT1.1969
BS4082.PT2.1969
BS4094.PT1.1966
BS4094.PT2.1971
BS4097.1966
Wool Mats and Mattresses
Specification for Thermal Insulating Materials :Part 4: Bonded Preformed Mineral
Wool Pipe Sections
Specification for Thermal Insulating Materials :Part 5: Bonded Mineral Wool Slabs
(for use at Temperatures Above 50 C)
Specification for Thermal Insulating Materials :Part 6: Finishing Materials; Hard
Setting Composition, Self-Setting Cement and Gypsum Plaster
Specification for Cast Iron Screw-Down Stop Valves and Stop and Check Valves
for General Purposes
Specification for Image Quality Indicators for Radiography and Recommendation
for Their Use
Methods of Measuring the Performance of Household Electrical Appliances :Part
13: Frozen Food Storage Compartments in Refrigerators and Frozen Food Storage
Cabinets
Specification for Rotary Core Drilling Equipment :Part 1: Basic Equipment
Specification for Rotary Core Drilling Equipment :Part 2: Concrete Drilling
Equipment
Specification for Combined Wire and Fibre Ropes
:Part 1: Combined Ropes
:part 2: Spring Lay Ropes
Specification for Metal Props and Struts
Specification for Steel Chimneys
Methods for Non-Destructive Testing of Steel Casting
Specification for External Dimensions for Vertical In-Line Centrifugal Pumps :Part
1: “I” Type
Specification for External Dimensions for Vertical In-Line Centrifugal Pumps :Part
2: “U” Type
Recommendation for Data Shielding from Ionizing Radiation :Part 1: Shielding
from Gamma Radiation
Recommendation for Data Shielding from Ionizing Radiation :Part 2: Shielding
from X - Radiation
Specification for Gamma Radiography Exposure Containers for Industrial Purposes,
and Their Source Holders
25
BS4118.1967
BS4128.1967
BS4175.PT1.1967
BS4175.PT2.1970
BS4210.PT1.1977
BS4210.PT3.1977
BS4235.PT1.1972
BS4235.PT2.1977
BS4250.1975
BS4262.1968
BS4315.PT2.1970
BS4372.1968
BS4385.1969
BS4402.1969
BS4408.PT1.1969
BS4408.PT2.1969
BS4408.PT3.1970
BS4408.PT4.1971
BS4409.PT1.1969
BS4409.PT2.1970
BS4424.1969
Glossary of Sanitation Terms
Recommendation for The Selection, Use and Care of Man - Made Fibre Ropes in
Marine Applications
Methods for Rockwell Superficial Hardness Test (N and T Scales) :Part 1: Testing
of Metals
Methods for Rockwell Superficial Hardness Test (N and T Scales) :Part 2:
Verification of the Testing Machine
Specification for 35 mm Microcopying of Technical Drawings :Part 1: Operating
Procedures
Specification for 35 mm Microcopying of Technical Drawings :Part 3: Unitized
Microfilm Carriers
Specification for Metric Keys and Keyways :part 1: Parallel and Taper Keys
Specification for Metric Keys and Keyways :part 2: Woodruff Keys and Keyways
Specification for Commercial Butane and Propane
Methods for The Technical Assessment of Coke for Use in Blast Furnaces
Methods of Test for Resistance to Air and Water Penetration :Part 2: Permeable
Walling Constructions (Water Penetration)
Specification for Engineers’ Steel Measuring Rules
Methods for Determination of Petroleum Products (Dean and Stark Method)
Specification for Mechanical Safety Requirement for Laboratory Centrifuges
Recommendation for Non-Destructive Methods of Test for Concrete :Part 1:
Electromagnetic Cover Measuring
Recommendation for Non-Destructive Methods of Test for Concrete :Part 2: Strain
Gauges for Concrete Investigations
Recommendation for Non-Destructive Methods of Test for Concrete :Part 3:
Gamma Radiography of Concrete
Recommendation for Non-Destructive Methods of Test for Concrete :Part 4:
Surface Hardness Methods
Specification for Screw Conveyors :Part 1: Trough Type for Industrial Use
Specification for Screw Conveyors :Part 2: Portable and Mobile Tubular Type
(Augers) for Agricultural and Light Industrial Use
Methods for The Thermal Performance Testing of Insulated Equipment for
Transportation of Perishable Foodstuffs
26
BS4433.PT1.1973
BS4433.PT2.1969
BS4434.PT1.1969
BS4434.PT2.1976
BS4445.1969
BS4466.1969
BS4500.PT3.1973
BS4504.PT2.1974
BS4508.PT1.1969
BS4508.PT2.1973
BS4508.PT3.1977
BS4508.PT4.1977
BS4543.PT1.1976
BS4543.PT2.1976
BS4543.PT3.1976
BS4545.1970
BS4617.1970
Specification for Solid Smokeless Fuel Boilers With Rated Outputs up to 45 kW
:Part 1: Boilers With Undergrate ash Removal
Specification for Independent Thermostatically Controlled Central Heating Boilers
With Rated Outputs up to 44 kW :Part 2: Gravity Feed Boilers Designed to Burn
Small Anthracite
Specification for Requirements for Refrigeration Safety :Part 1: General
Specification for Requirements for Refrigeration Safety :Part 2: Particular
Requirements for Small Refrigerating Systems for Use in Household Appliances
Schedule of Test for Gasification and Reforming Plants Using Hydrocarbon
Feedstocks
Specification for Bending Dimensions and Scheduling of Bars for the
Reinforcement of Concrete
Specification for ISO Limits and Fits :Part 3: Working Limits on Untoleranced
Dimensions
Specification for Flanges and Bolting for Pipes, Valves and Fittings. Metric Series
:Part 2: Copper Alloy and Composite Flanges
Specification for Thermally Insulated Underground Piping Systems :Part 1: Steel
Cased Systems With Air Gap
Specification for Thermally Insulated Underground Piping Systems :Part
2:Asbestos-CementCased Systems With Air Gap
Specification for Thermally Insulated Underground Piping Systems :Part 3: General
Requirements for Cased Systems With Air Gap
Specification for Thermally Insulated Underground Piping Systems :Part4: Specific
Testing and Inspection Requirements for Cased Systems With Air Gap
Factory-Made of Test for Factory-Made Insulated Chimneys :Part 1: Methods of
Test for Factory-Made Insulated Chimneys
Factory-Made of Test for Factory-Made Insulated Chimneys :Part 2: Specification
for Chimneys for Solid Fuel Fired Appliances
Factory-Made of Test for Factory-Made Insulated Chimneys :Part 3: Specification
for Chimneys for Oil Fried Appliances
Methods for Mechanical Testing of Steel Wire
Methods for Testing Hydraulic Pumps and Motors for Hydrostatic Power
Transmission
27
BS4624.1970
BS4627.1970
BS4642.1970
BS4643.1970
BS4656.PT1.1970
BS4656.PT3.1971
BS4656.PT4.1971
BS4656.PT5.1973
BS4656.PT6.1971
BS4656.PT7.1971
BS4656.PT8.1974
BS4656.PT9.1974
BS4656.PT10.1975
BS4656.PT11.1973
BS4656.PT12.1973
BS4656.PT13.1973
BS4656.PT14.1973
BS4656.PT15.1976
Methods of Test for Asbestos-Cement Building Products
Glossary of Terms Relating to Types of Cements Their Properties and Components
Glossary of Industrial Furnace Terms
Glossary of Terms Relating to Joints and Jointing in Building
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 1:
General Purpose Parallel Lathes
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 3:
Milling Machines, Knee and Column Type, Horizontal or Vertical Spindle Plain
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 4: :
Milling Machines, Bed Type, Horizontal or Vertical Spindle
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 5:
Milling Machines, Knee and Column Type, Horizontal Spindle Universal
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 6:
Surface Grinding Machines With Vertical Grinding Wheel Spindle and
Reciprocating Table
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 7:
Surface Grinding Machines With Horizontal Grinding Wheel Spindle and
Reciprocating Table
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 8:
Internal Cylindrical Grinding Machines With Horizontal Spindle
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 9:
Internal Cylindrical Grinding Machines With Reciprocating Table
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 10:
Drilling Machines, Radial Type
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 11:
Drilling Machines, Vertical Floor Mounted Column and Pillar Types
Specification for The Accuracy of Machine Tools and Machine Tools and Methods
of Test :Pt 12: Dividing Heads
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 13:
Broaching Machines, Vertical Surface Type
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 14:
Broaching Machines, Vertical Internal Type
Specification Accuracy of Machine Tools and Methods of Test :Pt 15: Drilling
28
BS4656.PT17.1973
BS4656.PT18.1973
BS4656.PT19.1976
BS4656.PT20.1976
BS4675.PT1.1976
BS4700.1971
BS4718.1971
BS4740.PT2.1971
BS4741.1971
BS4759.1971
BS4772.1971
BS4773.PT1.1971
BS4773.PT2.1976
BS4813.1972
BS4814.1976
BS4840.1973
BS4845.1972
BS4848.PT2.1975
BS4848.PT4.1972
BS4884.PT1.1973
Machines, Turret and Single Spindle Co-Ordinate Types
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 17:
Broaching Machines, Vertical Universal Type
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 18:
Broaching Machines, Horizontal Internal Type
Specification for The Accuracy of Machine Tools and Methods of Test :Pt 19: Gear
Hobbing Machines
Specification of Accuracy of Machine Tools and Methods of Test :Pt 20: Machining
Centres, Vertical Spindle Type
Specification Mechanical Vibration in Rotating and Reciprocating Machinery :Part
1: Basis for Specifying Speeds from 10 to 200 Revolutions Per Second
Methods for Determination of Distillation Range of Volatile Organic Liquids
Methods of Test for Silencers for Air Distribution Systems
Methods of Evaluating Control Valve Capacity :Part 2: Gases or Vapours
Specification for Vertical Cylindrical Welded Steel Storage Tanks for LowTemperature Service: Single –Wall Tank for Temperatures Down to –50 C
Methods for Determination of K-Values of A Tensile Testing System
Specification for Ductile Iron Pipes and Fittings
Methods for Testing and Rating Air Terminal Devices for Air Distribution Systems
:Part 1: Aerodynamic Testing
Methods for Testing and Rating Air Terminal Devices for Air Distribution Systems
:Part 2: Acoustic Testing
Methods of Measuring Noise from Machine Tools
Specification for Expansion Vessels Using an Internal Diaphragm, for Sealed Hot
Water Heating Systems
Specification for Rigid Urethane Foam in Slab form for Transport Containers,
Refrigerator Cabinets and Cold Stores
Methods for the Sampling of Domestic Coke in Small Consignments (50-5000 kg)
Either in Bulk or in Bags
Specification Hot-Rolled Structural Steel Sections :Part 2: Hollow Section
Specification Hot-Rolled Structural Steel Sections :Part 4: Equal and Unequal
Angles
Specification for Technical Manuals :Part 1: Content
29
BS4884.PT2.1974
BS4890.1973
BS4892.1973
BS4934.1973
BS4937.PT1.1973
BS4937.PT2.1973
BS4937.PT3.1973
BS4937.PT4.1973
BS4937.PT5.1974
BS4937.PT6.1974
BS4937.PT2.1973
BSBS4941.PT1.1973
BS4947.1973
BS4954.PT1.1973
BS4975.1973
BS4979.PT1.1973
BS4979.PT2.1974
BS4982.PT1.1974
Specification for Technical Manuals :Part 2: Presentation
Test Methods for Mechanical Joints in Conveyor Belting
Guide to the Measurement of Thermal Radiation By Means of the Thermopile
Radiometer
Specification for Safety Requirements for Electric Fans and Regulators
International Thermocouple Reference Tables :Part 1: Platinum-10%
Rhodium/Platinum thermocouples
International Thermocouple Reference Tables :Part 1: Platinum-13%
Rhodium/Platinum thermocouples
International Thermocouple Reference Tables :Part 3: Iron/Copper-Nickel
Thermocouples
International Thermocouple Reference Tables :Part 4: Nickel-Chromium/NickelAluminium Thermocouples
International Thermocouple Reference Tables :Part 5: Copper/Copper-Nickel
Thermocouples
International Thermocouple Reference Tables :Part 6: Nickel-Chromium/CopperNickel thermocouples
International Thermocouple Reference Tables :Part 7: Platinum-30%
Rhodium/Platinum 6% Rhodium thermocouples
Specification for Motor Starters for Voltages up to and Including 1000 V a.c. and
1200 V d.c. :part 1: Direct-on-line (Full Voltage) a.c. Starters
Specification for Test Gases for Gas Appliances
Methods for Testing and Rating Induction Units for Air Distribution Systems :Part:
Thermal and Aerodynamic Performance
Specification for Prestressed Concrete Pressure Vessels for Nuclear Reactors
Methods for Testing and Rating Air Control Devices for Air Distribution Systems
:Part 1: Aerodynamic Testing of Constant Flow Rate Assemblies Without A Heat
Exchanger
Methods for Testing and Rating Air Control Devices for Air Distribution Systems
:Part 2: Aerodynamic Testing of Constant Flow Rate Assemblies Without A Heat
Exchanger
Specification for Standard Sizes of Refractory Bricks for Use in Rotary Cement
Kilns :Part 1: Basic Refractories
30
BS4982.PT2.1975
BS5041.PT2.1976
BS5041.PT5.1974
BS5060.1974
BS5075.1974
BS5080.PT1.1974
BS5094.1974
BS5150.1974
BS5151.1974
BS5152.1974
BS5153.1974
BS5154.1974
BS5155.1974
BS5156.1974
BS5157.1974
BS5158.1974
BS5159.1974
BS5160.1977
BS5163.1974
BS5228.1975
BS5234.1975
BS5247.PT14.1975
Specification for Standard Sizes of Refractory Bricks for Use in Rotary Cement
Kilns :Part 2: Fireclay and High Alumina Refractories
Specification Fire Hydrant Systems Equipment :Part 2: Landing Valves Dry Risers
Specification for Hydrant Systems Equipment :Part 5: Boxes for foam Inlets and
Dry Riser Inlets
Specification for Students’ Drawing Boards and Associated Equipment
Specification for Concrete Admixtures :Part 1: Accelerating Admixtures, Retarding
Admixtures and Water-Reducing Admixtures
Methods of Test for Structural Fixings in Concrete and Masonry :Part 1: Tensile
Loading
Methods for Determination of Softening Point of Bitument and Tar in Ethylene
Glycol (Ring-and-Ball)
Specification for Cast Iron Wedge and Double Disk Gate Valves for General
Purposes
Specification for Cast Iron Gate (Parallel Slide) Valves for General Purposes
Specification for Cast Iron Globe and Globe Stop and Check Valves for General
Purposes
Specification for Cast Iron Check Valves for General Purposes
Specification for Copper Alloy Globe, Globe Stop and Check, Check, and Gate
Valves for General Purposes
Specification for Cast Iron and Carbon Steel Butterfly Valves for General Purposes
Specification for Screw Down Diaphragm Valves for General Purposes
Specification for Steel Gate (Parallel Slide) Valves for General Purposes
Specification for Cast Iron and Carbon Steel Plug Valves for General Purposes
Specification for Cast Iron and Carbon Steel Ball Valves for General Purposes
Specification for Flanged Steel Globe Valves, Globe Stop and Check Valves and
Lift Type Check Calves for General Purposes
Specification for Double Flanged Cast Iron Wedge Gate Valves for Waterworks
Purposes
Code of Practice for Noise Control on Construction and Demolition Sites
Code of Practice Internal Non-Loadbearing Partitioning
Code of Practice for Sheet Roof and Wall Coverings :Part 14: Corrugated AsbestosCement
31
BS5257.1975
BS5258.PT1.1975
BS5258.PT12.1975
BS5258.PT3.1975
BS5258.PT4.1975
BS5258.PT5.1975
BS5258.PT6.1975
BS5258.PT7.1975
BS5263.1976
BS5266.PT1.1975
BS5276.PT1.1976
BS5276.PT4.1977
BS5284.1976
BS5289.1976
BS5304.1975
BS5306.PT1.1976
BS5309.PT1.1976
BS5309.PT2.1976
BS5309.PT3.1976
BS5309.PT4.1976
BS5314.PT1.1976
BS5314.PT2.1976
BS5314.PT3.1976
BS5314.PT4.1976
BS5314.PT5.1976
Specification for Horizontal End-Suction Centrifugal Pumps (16 Bar)
Specification for Domestic Gas Appliances :Part 1: Central Heating Boilers and
Circulators
Specification for Safety of Domestic Gas Appliances :Part 2: Cooking Appliances
Specification for Safety of Domestic Gas Appliances :Part 3: Drying Cabinets
Specification for Safety of Domestic Gas Appliances :Part 4: Fanned-Circulation
Ducted-Air Heaters
Specification for Safety of Domestic Gas Appliances :Part 5: Gas Fires
Specification for Safety of Domestic Gas Appliances :Part 6: Refrigerators and
Food Freezers
Specification for Safety of Domestic Gas Appliances :Part 7: Storage Water Heaters
Code of Practice External Rendered Finishes
Code of Practice The Emergency Lighting of Premises :Part 1: Premises Other Than
Cinemas and Certain Other Specified Premises Used for Entertainment
Specification Pressure Vessel Details (Dimension) :Part 1: Davits for Branch
Covers
Specification Pressure Vessel Details (Dimension) :Part 4: Standardized Pressure
Vessels
Methods Sampling and Testing Mastic Asphalt and Pitchmastic Used in Building
Code of Practice Visual Inspection of Fusion Welded Joints
Code of Practice Safeguarding of Machinery
Code of Practice Fire Extinguishing Installation and Equipment on Premises :Part 1:
Hydrant Systems, Hose Reels and foam Inlets (Formerly CP 402.101)
Methods for Sampling Chemical Products :Part 1: Introduction and General
Principles
Methods for Sampling Chemical Products :Part 2: Sampling Gases
Methods for Sampling Chemical Products :Part 3: Sampling of Liquids
Methods for Sampling Chemical Products :Part 4: Sampling of Solids
Specification for Gas Heated Catering Equipment :Part 1: Ovens
Specification for Gas Heated Catering Equipment :Part 2: Boiling Burners
Specification for Gas Heated Catering Equipment :Part 3: Grillers and Toasters
Specification for Gas Heated Catering Equipment :Part 4: Fryers
Specification for Gas Heated Catering Equipment :Part 5: Steaming Ovens
32
BS5314.PT6.1976
BS5314.PT7.1976
BS5316.PT1.1976
BS5325.1976
BS5337.1976
BS5355.1976
BS5357.1976
BS5376.PT2.1976
BS5379.1976
BS5384.1977
BS5385.PT1.1976
BS5385.PT2.1978
BS5386.PT1.1976
BS5390.1976
BS5395.1977
BS5429.1976
BS5440.PT2.1976
BS5440.PT1.1976
BS5440.PT3.1976
BS5440.PT4.1977
BS5440.PT5.1976
Specification for Gas Heated Catering Equipment :Part 6: Bulk Liquid Heaters
Specification for Gas Heated Catering Equipment :Part 7: Water Boilers
Specification Acceptance Tests for Centrifugal, Mixed Flow and Axial Pumps :Part
1: Class C Tests
Code of Practice Installation of Textile Floor Coverings
Code of Practice The Structural Use of concrete for Retaining Aqueous Liquids
Specification for Filling Ratios and Developed Pressures for Liquefiable and
Permanent Gases
Installation of Security Glazing
Code of Practice Selection and Installation of Gas Space Heating (1 St and 2 nd
Family Gases ) :Part 2: Boilers of Rated Input not Exceeding 60 kW
Determination of the Sulphur Content of Petroleum Products By the Wickbold
Combustion Method
Guide to The Selection and Use of Control Systems for Heating, Ventilating and Air
Conditioning Installations
Code of Practice for Wall Tiling :Part 1: Internal Ceramic Wall Tiling and Mosaics
in Normal Conditions
Code of Practice for Wall Tiling :Part 2: External Ceramic Wall Tiling and Mosaics
Specification for Gas Burning Appliances :Part 1: Gas Burning Appliances for
Instantaneous Production of Hot Water for Domestic Use
Code of Practice for Stone Masonry
Code of Practice for Stairs
Code of Practice for Safe Operation of Small Operation of Small-Scale Storage
Facilities for Cryogenic Liquids
Code of Practice for Flues and Air Supply for Gas Appliances of Rated Input not
Exceeding 60 kW (1 St 2 nd Family Gases) :Part 2: Air Supply
Metallic and Related Coatings :Part 1: Definition and Conventions Concerning the
Measurement of Thick Ness
Metallic and Related Coatings :Part 3: Eddy Current Method for Measurement of
Coating Thickness of Non-Conductive Coatings on Non-Magnetic Basic Metals
Metallic and Related Coatings :Part 4: Coulometric Method for the Measurement of
Coating Thickness
Metallic and Related Coatings :Part 5: Measurement of the Local Thickness of
33
BS5440.PT8.1976
BS5440.PT10.1976
BS5417.1976
BS5422.1977
BS5427.1976
BS5429.1976
BS5430.PT1.1977
BS5430.PT2.1977
BS5440.PT1.1978
BS5440.PT2.1976
BS5445.PT5.1977
BS5447.1977
BS5449.PT1.1977
BS5466.PT1.1977
BS5466.PT2.1977
BS5466.PT3.1977
Metal and Oxide Coatings By the Microscopically Examination of Cross Sections
Metallic and Related Coatings :Part 8: Method of Thickness of Coatings : X- Ray
Spectrometric Methods
Metallic and Related Coatings :Part 10: Review of Methods Available for Testing
Adhesion of Electrodeposited and Chemically Deposited Metallic Coating on
Metallic Substrates
Testing of General Purpose Industrial Valves
Specification for The Use of Thermal Insulating Materials
Code of Practice for Performance and Loading Criteria for Profiled Sheeting in
Building
Code of Practice for Safe Operation of Small-Scale Storage Facilities for Cryogenic
Liquids
Specification for Periodic Inspection, Testing and Maintenance of Transportable
Gas Containers (Excluding dissolved Acetylene Containers) :Part 1: Seamless Steel
Containers
Specification for Periodic Inspection, Testing and Maintenance of Transportable
Gas Containers (Excluding dissolved Acetylene Containers) :Part 2: Welded Steel
Containers of Water Capacity 1 Litter up to 130 Litter
ode of Practice for Flues and Air Supply for Gas Appliances of Rated Input not
Exceeding 60 kW (1 St and 2 nd Family Gases) :Part 1: Flues
Code of Practice for Flues and Air Supply for Gas Appliances of Rated Input not
Exceeding 60 kW (1 St and 2 nd Family Gases) :Part 2: Air Supply
Components of Automatic Fire Detection Systems :Part 5: Heat Sensitive DetectorsPoint Detectors Containing a Static Element
Methods of Test for Plane Strain Fracture Toughness (K Ic) of Metallic Materials
Code of Practice for Central Heating for Domestic Premises :Part 1: Forced
Circulation Hot Water Systems
Methods for Corrosion Testing of Metallic Coatings :Part 1: Neutral Salt Spray Test
(NSS Test)
Methods for Corrosion Testing of Metallic Coatings :Part 2: Acetic Acid Salt Spray
Test (NSS Test)
Methods for Corrosion Testing of Metallic Coatings :Part 3: Copper-Accelerated
Acetic Salt Spray Test (CASS Test)
34
BS5471.1977
BS5482.PT2.1977
Specification for Thermometer for Use With Alcohol Hydrometers
Code of Practice for Domestic Butane-and Propane-Gas-Burning Installations :Part
2: Installation in Caravans and Non-Permanent Dwellings
BS5489.PT1.1973
Code of Practice for Road Lighting :Part 1: General Principles
BS5489.PT7.1971
Code of Practice for Road Lighting :Part 7: Lighting for Underpasses and Bridged
Rods
BS5489.PT8.1967
Code of Practice for Road Lighting :Part 8: Lighting for Roads With Special
Requirements
BS5489.PT9.1989
Code of Practice for Road Lighting :Part 9: Lighting for Town and City Centres and
Areas of Civic Importance
BS5491.1977
Specification for Rating and Testing Unit Air Conditioners of Above 7 kW Cooling
Capacity
BS5492.1977
Code of Practice for Internal Plastering
BS5516.1977
Code of Practice for Patent Glazing
BS5534.1978
Code of Practice for Slating and Tiling :Part 1: Design
BS5572.1978
Code of Practice for Sanitary Pipe work
BS6001.1972
Specification for Sampling Procedures and Tables for Inspection By Attributes
BS au50.PT1.Section.1c.1976 British Standard: Automobile series Specification for Tyres and Wheels :Part 1:
Tyres Section 1c.Cra Tyres
BSAU50.PT1.Secction 0b.1973 British Standard: Automobile series Specification for Tyres and Wheels :Part 1:
Tyres Section o.General
BS au50.PT1.Section.2c.1976 British Standard: Automobile series Specification for Tyres and Wheels :Part 2c:
Tyres Section 2c.Commercial Vehicle Tyres
BSAU50.PT1.Secction 4b.1973 British Standard: Automobile series Specification for Tyres and Wheels :Part 1:
Tyres Section 4.General
BS au50.PT1.Section.5c.1976 British Standard: Automobile series Specification for Tyres and Wheels :Part 2a:
Tyres Section 5c.Industrial Vehicle Tyres
BS AU50.PT2A.1973
British Standard: Automobile series Specification for Tyres and Wheels :Part 2a:
Wheels and Rims-Dimensions
BS.CP3.PT1.1971
Chapter IV Precautions Against Fire :Part 1.Flats and Maisonettes (In Blocks Over
Two Storeys)
BS.CP3.CT4.1948
Precautions Against Fire
BS.CP3.CT7.1950
Engineering and Utility Services
35
BS.CP3.CT8.1949
Heating and Thermal Insulation
BS.CP3.CT4.PT3. 1968
BS.CP3.CT8.1949
BS.CP3.CH11.1970
BS.CP5.1945
BS.CP116.1965
BS.CP116.1969
BS.CP117.PT1.1965
Chapter IV Precautions Against Fire :Part 2 Shop and Departmental Stores
Heating and Thermal Insulation
Chapter II :Thermal Insulation in Relation to the Control of Environment
Sunlight Houses, Flats and Schools Only
Large-Panel Structures and Structural Connection in Precast Concrete
The Structural use of Precast Concrete
Composite Construction in Structural Steel and Concrete :Part I :Simply-Supported
Beams in Building
Composite Construction in Structural Steel and Concrete :Part 2.Beams for Bridges
The Structural use of Aluminium
Code of Practice for The use of Safety Nets on Constructional Works
Demolition
Access for the Disabled to Buildings :Part I :General Recommendations
Metal Scaffolding :Part I.Common Scaffolds in Steel
Metal Scaffolding :part 2.Suspended Scaffolds
Metal Scaffolding :part 3.Special Scaffold Structures in Steel
Foundations and Substructures for Non-Industrial Buildings of not more than Four
Storeys
Code of Practice for Protection of Buildings Against Water from the Ground
Structural Recommendations for Loadbearing Walls
The Structural use of Timber :Part 2.Metric Units
The Structural use of Reinforced Concrete in Buildings
The Structural use of Prestressed Concrete in Buildings
Code of Practice for Walling
Walls and Partitions of Blocks and Slabs :Part I: Hollow Glass Blocks
Code of Practice for Chimneys and Flues for Domestic Appliances Burning Solid
Fuel
Slating and Tiling :Part I : Imperal Units
Sheet Roof and Wall Coverings :Part 2: Galvanized Corrugated Steel
Sheet Roof and Wall Coverings :Part I: Aluminium Corrugated and Troughed
Sheet Roof and Wall Coverings :Part II: Lead : Metric Units
Sheet Roof and Wall Coverings :Part 5 : Zinc
BS.CP117.PT2.1967
BS.CP118.1969
BS.CP93.1972
BS.CP94.1971
BS.CP96.PT1.1967
BS.CP97.PT1.1967
BS.CP97.PT2.1970
BS.CP97.PT3.1972
BS.CP101.1972
BS.CP102.1973
BS.CP111.1970
BS.CP112.PT2.1971
BS.CP114.1969
BS.CP115.1969
BS.CP121.PT1.1073
BS.CP122.PT1.1966
BS.CP131.1974
BS.CP142.PT1.1968
BS.CP143.PT2.1961
BS.CP143.PT1.1958
BS.CP143.PT2.1970
BS.CP143.PT5.1964
36
BS.CP143.PT6.1962
BS.CP143.PT8.1970
BS.CP143.PT10.1973
BS.CP143.PT12.1970
BS.CP143.PT15.1973
BS.CP143.PT16.1974
BS.CP144.PT2.1966
BS.CP144.PT1.1968
BS.CP151.PT1.1957
BS.CP152.1972
BS.CP153.PT1.1969
BS.CP153.PT2.1970
BS.CP153.PT3.1972
BS.CP153.PT4.1972
BS.CP199.PT1.1973
BS.CP201.1951
BS.CP201.PT1.1967
BS.CP201.PT2.1972
BS.CP204.1965
BS.CP209.PT1.1963
BS.CP202.1972
BS.CP231.1966
BS.CP290.1973
BS.CP297.1972
BS.CP299.1970
BS.CP301.1971
BS.CP302.1972
BS.CP306.1972
BS.CP308.1974
Sheet Roof and Wall Coverings :Part 6 : Corrugated Asbestos-Cement
Sheet Roof and Wall Coverings :Part 8 : Semi-rigid Asbestos Bitumen Sheet
Sheet Roof and Wall Coverings :Part 10 : Galvanized Corrugated Steel Metric Units
Sheet Roof and Wall Coverings :Part 12: Copper : Metric Units
Sheet Roof and Wall Coverings :Part 15: Aluminium. Metric Units
Sheet Roof and Wall Coverings :Part 16: Semi-Rigid Asbestos Bitumen Sheet.
Metric Units
Roof Coverings :Part 2: Mastic Asphalt.Imperial Units
Roof Coverings :Part 1: Built-up Bitumen Felt Imperial Units
Doors & Windows Including Frames and Linings :Part 1: Wooden Doors
Glazing and Fixing of Glass for Buildings
Windows and Rooflights :Part 1: Cleaning and Safety
Windows and Rooflights :Part 2: Durability and Maintenance
Windows and Rooflights :Part 3: Sound Insulation
Windows and Rooflights :Part 4: Fire Hazards Associated With Glazing in
Buildings
Roof Deckings :Part 1: Asbestos-Cement Metric Units
Timber Flooring
Flooring of Wood and Wood Products :Part 1: Wood flooring (Board,Strip,Block
and Mosaic)
Flooring of Wood and Wood Products :Part 2: Wood Flooring (Board,Strip,Block
and Mosaic)
In-Situ Floor Finishes
Care and Maintenance of Floor Surfaces :Part 1: Wooden Flooring
Code of Tile Flooring and Slab Flooring
Painting of Buildings
Suspended Ceilings and Lining of Dry Construction Using Metal Fixing Systems
Precast Concrete Cladding (Non-Loadbearing)
Sprayed Asbestos Insulation
Building Drainage
Small Sewage Treatment Works
The Storage and On-Site Treatment of refuse from Buildiingns
Drainage of Roofs and Paved Areas
37
BS.CP310.1965
BS.CP312.PT1.1973
BS.CP312.PT2.1973
BS.CP312.PT3.1973
BS.CP324.202.1951
BS.CP326.1965
BS.CP327.PT3.1964
BS.CP329.1968
BS.CP330.1968
BS.CP331.PT1.1973
BS.CP331.PT2.1974
BS.CP331.PT3.1974
BS CP332.PT2.1974
BS .CP.332.PT1.1961
BS.CP332.PT3. 1970
BS.CP332.PT4.1966
BS.CP333.PT1.1964
BS.CP333.PT2.1948
BS.CP333.PT3.1971
BS.CP334.PT1.1962
Water Supply
Plastic Pipe work (Thermoplastics Material)
Plastic Pipe work (Thermoplastics Material) :Part 2: Unplasticzed PVC Pipe work
for the Conveyance of Liquids Under Pressure
Plastic Pipe work (Thermoplastics Material) :Part 3: Polyethylene Pipe for the
Conveyance of Liquids Under Pressure
Domestic Electric Water-Heating Installations
The Protection of Structures Against Lightning
Telecommunication Facilities in Buildings :Part 3: Sound Distribution Systems
Specification for Steel Wire Ropes for Electric Lifts
Specification for Steel Wire Ropes for Haulage Purposes
Code of Practice for Installation Pipes and Meters for Town Gas :Part 1: Service
Pipes
Code of Practice for Installation Pipes and Meters for Town Gas :Part 2: Low
Pressure Metering
Code of Practice for Installation Pipes and meters for Town Gas :Part 3: Low
Pressure Installation pipes
Code of Practice for Installation Pipes and meters for Town Gas :Part 2: Low
Pressure Metering
Selection and Installation of Town Gas Space Heating :Part 1: Independent
Domestic Appliances(Formerly CP332.301:1961)
Selection and Installation of Town Gas Space Heating :Part 3: Boilers of More than
150 000 Btu/h (44 kW) and up to 2000 000 Btu/h (586 kW) Output
Selection and Installation of Town Gas Space Heating :Part 4: Ducted Warm Air
Systems
Selection and Installation of Town Gas Hot Water Supplies :Part 1: Domestic
Premises(Formerly CP332.201:1964)
Selection and Installation of Town Gas Hot Water Supplies :Part 2: Schools
(Formerly CP332.202:1948)
Selection and Installation of Town Gas Cooking and Refrigerating Appliances
:Part 3: Refrigerators
Selection and Installation of Town Gas Cooking and Refrigerating Appliances
:Part 1: Domestic Cooking Appliances (Formerly CP332.401:1962)
38
BS.CP334.PT2.1966
BS.CP334.PT3.1971
BS.CP335.PT1.1973
BS.CP338.1957
BS.CP339.PT3.1956
BS.CP341, 300-307.
1956
BS.CP342.PT1.1970
BS.CP342.PT2.1974
BS.CP342.PT3.1964
BS.CP352.1958
BS.CP403,101.1952
BS.CP403.1974
BS.CP407.1972
BS.CP413.1973
BS.CP499PT1.1972
BS.CP1003.PT1.1964
BS.CP1003.PT2.1966
BS.CP1003.PT3.1967
Selection and Installation of Town Gas Cooking and Refrigerating Appliances
:Part 2: Cooking Installations for Educational Establishments
Selection and Installation of Town Gas Cooking and Refrigerating Appliances
:Part 3: Refrigerators
Code of Practice for Selection and Installation of Miscellaneous Town Gas
Appliances :Part 1: Domestic Laundering and Miscellaneous Appliances
Domestic Propane-Gas-Burning Installations in Permanent Dwellings
Domestic Butane-Gas-Burning Installations :Part 3: Installations in Boats, Yachts
and Other Vessels
Central Heating by Low Pressure Hot Water
Centralized Hot Water Supply :Part 1: Individual Dwelling
Code of Practice for Centralized Hot Water Supply :Part 2: Buildings Other than
Individual Dwellings
Fire Fighting Installations and Equipment :Part 3: Portable Fire Extinguishers for
Buildings and Plant
Mechanical Ventilation and Air Conditioning in Buildings
Small Boiler Systems Using Solid Fuel
Code of Practice for Installation of Domestic Heating and Cooking Appliances
Burning Solid Fuel
Electric, Hydraulic and Hand-Powered Lifts
Code of Practice Ducts for Build Services
Metal Railings and Balustrades for use in Buildings and Their Curtilages :Part 1:
Institutional, Administrative and residential Buildings and Stores
Electrical Apparatus and Associated Equipment for use in Explosive Atmospheres
of Gas or Vapour Other Than Mining Applications :Part 1: Choice, Installation and
Maintenance of Flameproof and Intrinsically-safe Equipment
Electrical Apparatus and Associated Equipment for use in Explosive Atmospheres
of Gas or Vapour Other Than Mining Applications :Part 2: Methods of meeting the
Explosion Hazard Other Than by the use of Flameproof or Intrinsically-safe
Electrical Equipment
Electrical Apparatus and Associated Equipment for use in Explosive Atmospheres
of Gas or Vapour Other Then Mining Applications :Part 3: Division 2 Areas
39
BS.CP1004.PT2.1974
BS.CP1004.PT4.1967
BS.CP1004.PT5.1973
BS.CP1004.PT6.1967
BS.CP1007.1955
BS.CP1010.PT1.1959
BS.CP1011.1961
BS.CP1011.1961
BS.CP1013.1965
BS.CP1014.1963
BS.CP1017.1969
BS.CP1018.1971
BS.CP1019.1972
BS.CP1020.1973
BS.CP1022.1973
BS.CP2001.1957
BS.CP2003.1959
BS.CP2004.1972
BS.CP2005.1968
BS.CP2010.PT1.1966
BS.CP2010.PT2.1970
BS.CP2010.PT3.1972
BS.CP2010.PT4.1972
BS.CP2010.PT5.1974
BS.CP2012.PT1.1974
BS.CP3000.1955
BS.CP3009.1970
BS.CP3010.1972
Code of Practice for Road Lighting :Part 2: Lighting for Traffic Routes (Group A)
Street Lighting :Part 4: Lighting for Single-Level Road Junctions Including
Roundabouts
Code of Practice for Street Lighting :Part 5: Lighting for Grade-Separated Junction
Street Lighting :Part 6: Lighting for Bridges and Elevated Roads
Maintained Lighting for Cinemas
Draw-off Tapes and Stopvalves :Part 1: Imperial Unites
Maintenance of Electric Motor Control Gear
Earthing
Protection of Electrical Power Equipment Against Climatic Conditions
Methods for the Analysis and Testing of Coal and Coke :Part 14: Analysis Coal ash
and Coke ash
The Sampling of Coal and Coke :Part 2: Sampling of Coke
Electric Floorwarming systems for use with off-peak and Similar Supplies of
Electricity
The Installation and Servicing of Electrical Fire Alarm Systems
The Reception of Sound and Television Broadcasting
The Selection and Accommodation of Telephone, Telegraph and Data
Communication Installations
Site Investigations
Earthworks
Foundations
Sewerage
Pipelines :Part 1: Installation of Pipelines in Land
Pipelines :Part 2: Design and Construction of Steel Pipelines in Land
Pipelines :Part 3: Design and Construction of iron Pipelines in Land
Pipelines :Part 4: Design and Construction of Asbestos Cement Pipelines in Land
Pipelines :Part 5: Design and Construction of Prestressed Cement Pressure Pipelines
in Land
Foundation for Machinery :Part 1: Foundation for Reciprocating Machines
The Installation and Maintenance of Underfeed Stokers
Thermally Insulated Underground Piping Systems
Safe use of cranes (Mobile Cranes, Tower Cranes and derrick Cranes)
40
BS.DD13.1974
BS.DD15.1974
BS.DD16.1976
BS.DD19.1972
BS.DD34.1974
BS.DD47.1975
BS.DD50.1976
BS MA1.PT1.1969
BS MA9.PT1.1970
BS.PD5686.1978
BS.PD6437.1969
BS.PD6438.1969
BS.PD6439.1969
Draft for Development Guide on the Assessment of Reliability of Engineering
Equipment and Parts
Draft for Development Guide on the Production , Flow, Analysis and Interpretation
of Reliability Data for Engineering Equipment and Parts
Draft for Development Guide on the Reliability of Engineering Equipment and Parts
Practical Examples of DD 10 to DD 15
Methods for Crack Opening Displacement (COD) Testing
Draft for Development Clay Bricks With Modular Dimensions
Draft for Development Vibration Isolation of Structures By Elastomeric Mountings
Draft for Development Air Supported Structures
British Standard : Marine Series Specification for Graphical Symbols Representing
Pipeline Systems in Ships :Part 1: general Shipboard services
British Standard : Marine Series Specification for Flanges and Bolting for Exhaust
Gas Piping for Diesel Engines and Boiler Uptakes
The Use of SI Units
A Review of Design Methods Given in Present Standards and Codes and Design
Proposals for Nozzles and Opening in Pressure Vessels
A Review of Design Methods for Design of Bolted Flanges for Pressure Vessels
A Review of Design Methods of Calculating Stresses Due to Local Attachments of
Pressure Vessels