SPICE Model 6N137, VO2601/11/30/31, VO0600/01/11, VO4661, SFH6755T/6T/7T
Vishay Semiconductors
High Speed Optocoupler, 10 MBd
This 10 Mbd family is an industry standard optocoupler, utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector output is open drain NMOS-transistor.
The 6N137, VO2601, VO2611, VO0600, VO0601 and VO0611 are single channel. The detector has an enable function on pin 7 allows the detector to be strobed.
The VO0630, VO0631, VO0661, VO2630, VO2631, VO4661, SFH6755T, SFH6756T, and SFH6757T are dual channel without enable pin.
Their SPICE models have been written from device characterization data and were tested with simulation programs NI Multisim.
This document is intended as a SPICE modeling guideline and does not constitute a commercial product, neither a substitute to datasheet.
PART MODEL DESCRIPTION MODEL FILE
6N137, VO2601, VO2611,
VO0600, VO0601, VO0611
VO0630, VO0631, VO0661,
VO2630, VO2631, VO4661,
SFH6755T, SFH6756T,
SFH6757T
Single channel with enable function
V
E
: pin 7
Dual channel
1
2
3
4
SYMBOL FILE
2
3
A
C
U1
6N137.sym
8 V
CC
7 V
E
6 V
O
5 GND
U2
8 V
CC
7 V
O1
6 V
O2
VO2630.sym
5 GND
6N137.cir
VO2630.cir
This model is designed only for use at 25 °C.
LED
On
Off
On
Off
On
Off
Note
(1) With external pull-up resistor
ENABLE (V
E
)
H
H
L
L
NC
NC
OUTPUT (V
O
) (1)
L
H
H
H
L
H
Document Number: 85229
Rev. 1.0, 05-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SPICE Model 6N137, VO2601/11/30/31, VO0600/01/11, VO4661, SFH6755T/6T/7T
Vishay Semiconductors
amb
PARAMETER TEST CONDITION SYMBOL
OUTPUT
Input threshold current V
E
= V
O
= 5 V, R
L
= 350

I
TH
SWITCHING
Propagation delay time to high output level (1)
Propagation delay time to low output level
(1)
Output rise time (10 % to 90 %)
R
L
= 350

, C
Output fall time (90 % to 10 %)
Note
(1)
See fig. 1 and timing simulation setup on page 3.
L
= 15 pF t pLH t pHL t r t f
DATA
5
70
70
22
17
UNIT mA ns ns ns ns
Input I
F
Output V
O t
PHL
Fig. 1 - Switching Times t
PLH
I
F
= 7.5 mA
I
F
= 3.75 mA
0 mA
V
OH
1.5 V
V
OL www.vishay.com
2
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 85229
Rev. 1.0, 05-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SPICE Model 6N137, VO2601/11/30/31, VO0600/01/11, VO4661, SFH6755T/6T/7T
Vishay Semiconductors
A
X S C1
O
T
B
GND
GND
+
U
1
V
1
2 MHz
2.4 V
4
6
R
1
100 Ω
2 A
3
C
6N137
V
CC
V
E
8
7
V
O 6
GND
5
3
R
2
350
Ω
1
C
1
15 pF
GND
GND
Fig. 2 - Timing Simulation Setup (V
CC
= 5 V,, R
L
= 350

, C
L
= 15 pF)
V
2
5 V
Fig. 3 - Timing Simulation Output
Copyright: Vishay Intertechnology, Inc.
Document Number: 85229
Rev. 1.0, 05-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.
Revision: 02-Oct-12 1 Document Number: 91000