Item number
Power voltage
Frequency
W035186
AC single-phase 240 V ±15%
50/60 Hz
Rated input current
MIG
TIG
Output current
MMA 10 to 150 A
TIG 10 to 185 A
Rated working voltage
MMA
TIG
Duty cycle
Arc initiation
Remote control
60%
HF
No
80%
Power factor 0,73
Insulation grade
Housing protection grade
F
IP21
Dimensions (L x W x H)
Weight
450 × 204 × 368 mm kg
Standards IEC 60974.1; 10
Features
• AC/DC machine for aluminium
welding
• High frequency
• AC balance
• Post flow and down slope
adjustment
• 2T/4T switch
• Overheat protection indicator
Applications
• Light fabrication
• Chassis/frame fabrication
• Aluminium oil pans
• Stainless steel exhaust
• Weld repair on home equipment
• Metal art
• Vocational training
Product description
Rated at 185 A at 60% duty cycle. Single-phase 220 V. The lightweight Afrox Industrial TIG 185 AC/DC machine is inverter-based. The AC/
DC power source provides a more consistent welding arc while using less power. Supplied with flow meter, TIG torch and cables necessary for TIG welding.
The information contained or otherwise referenced herein is presented only as typical without guarantee or warranty, and Afrox expressly disclaims any liability incurred from any reliance thereon. No data is to be construed as recommended for any welding condition or technique not controlled by Afrox. For more information contact the Afrox
Customer Service Centre, tel: 0860 020202 or e-mail: customer.service@afrox.linde.com, website: www.afrox.com