Technical Specifications
Model No.
BOC Smootharc TIG 200 AC/DC
Part No.
BOCACDC200
Power Voltage
1ph AC240V+/– 15%
Frequency (HZ)
50/60
Rated Input Current (A)
28
Output Current (A)
MMA 5-160
TIG 5-200
No-load Voltage (V)
56
Rated Duty Voltage (V)
MMA 26.4
TIG 18
Consistently
delivers quality
welding for all
materials, including
aluminium
Ending Time (S)
2-10
Receptacle
Yes
Arc Start
HF
Duty Cycle (%) @ 200A
60
Power Factor
0.73
Insulation Grading
F
Protection Grading
IP21
Weight (kg)
20
Dimensions (mm)
498 x 328 x 302
Service and Warranty
The BOC Smootharc TIG 200 AC/DC machine comes with
a 12 month warranty (excluding torch and work leads)
and is backed by BOC’s national service network.
CE Approved
The BOC Smootharc TIG 200 AC/DC is available at your local
BOC Gas & Gear Store.
For your nearest location, please contact our Customer Service Centre on:
Australia
131 262
Email: CustomerServiceCentre@boc.com
www.boc.com.au
BOC Limited ABN 95 000 029 729
Riverside Corporate Park
10 Julius Avenue
North Ryde NSW 2113
AUSTRALIA
Details given in this document are believed to be correct at the time of printing.
Whilst proper care has been taken in the preparation, no liability for injury or
damage resulting from its improper use can be accepted.
BOC is a trading name of BOC Limited, a member of The Linde Group. © BOC Limited 2007.
Reproduction without permission is strictly prohibited.
MP07-0560-1
AZZAUS
1207
1K
BOC Smootharc
TIG 200 AC/DC
It’s the latest addition to the acclaimed Smootharc welding range – with all
the functionality, features and quality welders can expect from BOC products.
BOC now has the most comprehensive TIG welding offer on the market,
including TIG equipment, consumables, torches and shielding gases. No other
manufacturer can match this full package offer. It’s a complete start to finish
welding solution.
The new BOC Smootharc TIG is an inverter based TIG welding machine with
added MMA welding capability. This machine will consistently deliver high
quality TIG welding of steel, stainless steel, copper and most alloys. It’s
balanced AC also allows cleaning action control whilst welding aluminium.
Introducing the new
BOC Smootharc TIG 200 AC/DC
Only BOC has the full package – TIG equipment,
consumables, torches and market leading shielding gases
BOC Smootharc TIG 200 AC/DC
The BOC Smootharc 200 TIG AC/DC is a high quality, robust, inverter based
TIG welding machine with built-in MMA welding capability.
With its large number of variable functions, the Smootharc TIG 200 AC/DC
allows complete control of your welding parameters.
BOC offers
the most
comprehensive
TIG AC/DC
welding
package
available
The Smootharc DC characteristics of the machine allow quality TIG welding
of steel, stainless steel, copper and most alloys in the DC+ or DC- mode.
The added pulse option with separate control of peak and background
current, pulse width and frequency, provides you with perfect control of
welding parameters when welding thin material.
When the machine is matched with BOC shielding gases and BOC Profill TIG
welding rods, it will consistently deliver the highest quality weld metal.
The AC option on the machine is complemented by AC balance control
that allows you to set the welding parameters to achieve the maximum
penetration or cleaning required for the specific application.
Adjustable post flow and down slope ensure maximum quality of crater
filling and protection when welding all materials.
To take the guesswork out of torch selection BOC has designed an AC/DC
TIG pack – a dedicated 200A TIG torch that plugs straight into the machine.
Your existing BOC 26F/FX torch need only to be fitted with an external
contactor (available from BOC Gas & Gear stores).
BOC also carries a comprehensive range of TIG tungsten for every material
and mode of welding.
Applications
– Sheet metal
– Thin gauge aluminium
– Stainless steel and aluminium fabrications
– Pipe welding
– Root runs where high quality welds are required
– Welding of reactive materials such as titanium and magnesium
Non-consumable TIG Tungsten
BOC offers a full range of Tungstens, available at your
local Gas & Gear store
Steels, Low Alloys, Stainless Steels,
Coppers, Titanium and Nickel Alloys
Aluminium and Magnesium
(and alloys)
Features & Benefits
– The complete package offer
A one stop solution – BOC now offers TIG equipment,
consumables, torches and shielding gases.
– Inverter technology
Delivers better power efficiency, a high duty
cycle (60% @ 200A) while being a lightweight
machine (20kg).
– Single-phase 240V
Gives greater usage location options – not confined to
factory power location outlets.
– Low amperage setting
5-200A means you can weld thin materials.
– Pulse option
Allows reduced heat input which helps reduce
distortion and weld thinner materials.
– AC/DC functionality
Means you can weld any material, including
aluminium.
– AC balance control
Lets you select the amount of penetration or cleaning
required when welding aluminium.
– Slope down and post flow time
Prevent crater cracking and oxidation of the weld
metal by adjusting the post flow of shielding gas and
the rate of current reduction.
– 2T/4T
Increases the welder comfort when welding for
long periods of time.
– Remote control receptacle
Allows the attachment of a foot control or
remote pendants.
– Fully supported by the BOC network
The machine is backed by BOC’s national
service network.
– MMA option
Can be used as a MMA machine.
– 12 month warranty
Excluding torch and work leads.
Tungsten
Type
Materials
2% Thoriated Steels, Low
Tungsten
Alloys, Stainless
Steels, Coppers,
Titanium and
Nickel Alloys.
2% Ceriated Steels, Low
Tungsten
Alloys, Stainless
Steels, Coppers,
Titanium and
Nickel Alloys.
0.8%
Aluminium and
Zirconiated
Magnesium
Tungsten
(and alloys).
2%
Aluminium and
Zirconiated
Magnesium
Tungsten
(and alloys).
2%
Steels, Low
Lanthianated Alloys, Stainless
Tungsten
Steels, Coppers,
Titanium,
Nickel Alloys,
Aluminium and
Magnesium
(and alloys).
Pure
Steels, Low
Tungsten
Alloys, Stainless
Steels, Coppers,
Titanium and
Nickel Alloys.
Current Types*
Direct Current
Electrode
Negative (DCEN)
Tip
Colour
Red
Direct Current
Electrode
Negative (DCEN)
Grey
Alternating
Current (AC)
White
Alternating
Current (AC)
White
Direct Current
Electrode
Negative (DCEN)
and Alternating
Current (AC)
Gold
Direct Current
Electrode
Negative (DCEN)
(Lower current
carrying
capacity)
Green
Recommended Filler Material
C-Mn
Austenitic
Stainless Steel
Aluminium
BOC Profill 70S6
BOC 308LSi
BOC 1083
BOC Profill 70S2
BOC 309L
BOC 4043
BOC 316LSi
BOC 5356
BOC 5183
Shielding Gas Selection
Available from your local Gas & Gear store
TIG Tungsten Inert Gas
All fusion-weldable metals,
unalloyed and alloyed
steels, non-ferrous metals
Aluminium and its alloys
Austenitic stainless steel,
nickel alloys
Duplex and super-duplex
steels
Fully austenitic steels
Argon
Argon
Argon/Helium mixtures
Argon
Argon
Argon/Helium mixtures
Argon
Argon/Helium mixtures