Performance Advantages Using Kinetis L Series, Kinetis K Series and Kinetis E Series APF-SDS-T0388 James Huang | AP IMM MCU MAR.2014 TM External Use Kinetis-K: Why ARM Cortex-M4? Backwards compatible with ARM Cortex-M3 • Does everything the Cortex-M3 does and more but in less cycles (more energy efficient!) New features • Single cycle MAC (Up to 32 x 32 + 64 -> 64) • DSP extensions, Single Precision Floating Point Unit Freescale IP and Innovation • Cache, Cross-Bar and DMA for increased throughput • MPU for system resource protection • Low-leakage Wake-up Unit for low power operation Architected for Digital Signal Processing • Motor Control: advanced algorithms, faster control loops, more responsive to speed commands and changing loads, increased power efficiency • Automation: high calculation and algorithm bandwidth at a low cost • Power management: designed for low/battery powered systems (CLK @ 0.5x ARM Cortex M3) • Audio and Video: 5x performance improvement over software, extended battery operation TM External Use 1 Dotted boxes denote optional blocks Example Cortex-M4 speed vs. M3 Audio – Window Overlap and Add 1.8x – 2.6x faster FIR Filter 2x faster MP3 Decoder 2x faster WMA Decoder 1.6x faster Motor Control – Clarke Transform 5x faster Motor Control – Park Transform 7x faster Freescale Solutions Enabling the Smart Grid Energy Efficient. Secure. Connected Power Generation, Transmission, Monitoring & Control, Renewables MPC8xxx, QorIQ, Kinetis Distribution & Sub-station Automation, Grid Power Protection, Relay/Switch Control and Monitoring MSC9130, MPC8xxx, QorIQ, Kinetis Data Concentrator P102x, MPC8308, i.MX28 NAN <1GHz 802.15.4g G3/ PRIME OFDM PLC Kinetis KW01 TM External Use 4 1/2/3-phase e-Meters, Sub-Metering Kinetis M Series Kinetis MK30, C’Fire MCF51EM, Accelerometers (Physical Tamper Detection) HAN (Home Area Network) Zigbee Kinetis KW20 <1GHz WMBus Kinetis KW01, MC12311 Home Energy Management (HEMS) i.MX283, MPC8308, Kinetis, i.MX6 SoloX Kinetis M Series: Smart Metering MCUs Enabling single-chip 1,2 & 3-phase smart meters with exceptional accuracy, security and low power based on the 32-bit Cortex-M0+ processor Analog Front End • Highest accuracy and resolution AFE with 4 x low power 24-bit Sigma Delta ADCs - capable of 0.1% power measurements with high SNR of 94dB. Reduced Shunt value needed lowering power dissipation. No ADC muxing allowing direct measurement and computation of power Security & HMI • H/w support in Core, MPU (Memory Protection Unit), Cross-Bar Peripheral Bridge, GPIO and DMA for the separation of legally relevant (billing) related code (WELMEC/OIML), from the main application code • Active and passive tamper pins with automatic time stamping protect meter against external intrusion. Hardware Random Number Generator eases and speeds up support for encryption algorithms • 2 x Programmable Gain Amplifiers • Combined gain temperature drift of the SD ADC, PGA and Internal 1.2V Vref of only +/-75ppm/C° • Auto compensated iRTC with tamper detect, fast calibration and low drift over temperature - 5 ppm accuracy and 0.88 ppm resolution. • CRC (16/32 bits) • Segment LCD Controller supporting up to 288 segments and up to 8 backplanes. Low power blink mode operation and segment fault detect capability • • Single, low cost 32 kHz crystal required for the MCU and iRTC – no external required reducing BOM cost • 4 kV ESD, 6 kV PESD TM External Use 5 Enablement • 1/2/3-phase e-meter regionally specified Reference Designs certified to international standards • Filter and FFT based metrology algorithms provided free-of-charge • Tower System MCU Module from $159 with interchangeable peripheral modules • Comprehensive peripheral library drivers • MQX Lite RTOS provided free of charge Core • 32-bit ARM Cortex-M0+ core up to 50MHz • Separate FLL post-scalers for Flash and Core clocks. • Dedicated PLL for ΣΔ modulator clock • 4ch DMA • Memory Protection Unit • Single 32kHz Crystal operation • MHz Crystal optional Kinetis M Series: Overview +/-250mV analogue I/O pads with 6kV PESD Security & Encryption • Programmable 16/32-bit CRC • IRTC w/ tamper detection • 3 Tamper pins (operating on battery) • Random Number Generator (NIST: SP800-90) • AES Encryption (via software library) • Memories • Up to 128 KB Program Flash • 16 KB SRAM Analog • 4x24 bit ΣΔ after averaging (2xPGA) highly accurate supporting EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22 and IEC 62053-23, optimized for shunt sensor (≥50uOhm). • 0.1% error in active and reactive energy over a dynamic range of 2000 to 1 • Internal 1.2V reference voltage (15-20 ppm/oC) • 12-ch 16-bit SAR for auxiliary measurement • 2x analog comparator Serial Communications • 2x SPI • 4x UART Timer/PWM/Clock • All combined with Quad Timer & HSCMP for IR • Quad Timer (total 4 universal timers) • 2 support ISO7816 • 2x PIT • All support flow control • 1x Watchdog Timer (windowed, independently • 2× I2C clocked) • 1x EWM (External Watchdog Monitor) • All UARTs and SPIs are 3V compatible while 1 UART and 1 SPI are both 3V and 5V compatible • 1x LPTimer (open drain configuration) LCD Display Peripheral XBAR • Remapping peripheral IOs • UART selection for IR • TM External Use Up to 288 segment LCD, up to 8 backplanes Wakeup Unit • Group selected GPIOs (16), LPTIM, RTC (+tamper pins) , HSCMP, SCI , Brownout and POR sources to wake up from Power Gated STOP mode 6 New IP and functionality GPIO • • • • Up to 68 with push pull, pull up/down select Up to 8 GPIO with filter Support for interruption on any edge Single cycle access for all GPIOs (Rapid GPIO) Power Modes & Clock • • • • • • Many low power modes supported 2.7V to 3.6V Operating voltage with AFE 1.71V to 3.6V Operating voltage without AFE 1.71V-3.6V IRTC VBAT supply 32kHz or 4 MHz internal clock source 32.768kHz crystal oscillator Package • • 100 LQFP, 64 LQFP and 44 LGA options -40°C ~ +85°C Temp e-Meter Security Requirements and Traditional 2-chip Solutions • Legally relevant software shall run in privileged mode exclusively preventing other software functions to influence its execution. • Memory sections for legally relevant software, parameters and variables storage shall be protected against reading, writing and execution (R/W/E) from other software routines. • On-chip peripherals controlled by the legally relevant software shall not be influenced by other software routines. Legally nonrelevant software Legally relevant software TM External Use 7 Use Case 1: Kinetis M Single Chip 1, 2 and 3-phase e-Meter HAN RTC SPI Pulse Outputs HMI Basic COMMs Kinetis KM 100LQFP Tamper 1-4 phases Phase Current Sensors 100 LQFP 14 x 14 mm2 NVRAM 1-3 phases Phase Voltage Sensors Legally relevant Legally non-relevant TM External Use 8 Miscellaneous Control Module (MCM) Forces and enables control attributes for “CM0+” and ”DMA” masters. Supports privileged secure and user secure/non-secure access modes. Kinetis M – Legally Relevant/Non-relevant Software Separation H/W Support Kinetis M Platform* Supports privileged and user access modes. Memory Protection Unit (MPU) Performs on-chip memory access control based on access attributes of each bus cycle. Separate access rights can be defined for “CM0+” and “DMA” bus masters. DMA Controller Module Conducts accesses to onchip memory with either fixed or inherited access attributes. Supports privileged secure and user secure/non-secure access modes on a per channel basis. Peripheral Bridge (AIPS-Lite) Performs on-chip peripheral register space access control based on access attributes of each bus cycle. TM 9 The platform adds the concepts of a Use * The processor core supports privileged and userExternal modes of execution. processID register that supports the 3-state privilege model: privileged, user secure, user non-secure. GPIO Protection Controls R/W accesses to GPIO pins (grouped to 8-bit ports). Supports privileged secure and user secure/nonsecure access modes based on access attributes of each bus cycle. TWR-KM34Z50M Tower MCU Module Features • MKM34Z5128CLL5 MCU (50 MHz, 128 KB Flash, 16 KB RAM, low power, 100LQFP package) • USB interface with mini-AB USB connector • Large 160-segment LCD glass • On-board debug circuit: open source JTAG/SWD (OpenSDA) with virtual serial port • MMA8491Q 3-axis accelerometer/anti-tamper tilt sensor • Four user-controllable LEDs • Two user push button switches for GPIO interrupts • One user push button switch for tamper detection • One user push button switch for MCU reset • Potentiometer • Headers for direct GPIO and ADC access • External tamper pins • Independent, battery-operated power supply for real-time clock (RTC) and tamper detection modules • On-board 7-channel sinus signal generator with USB interface for emulating the AC net waveforms • IRDA support & NTC temperature sensor • General-purpose Tower plug-in (TWRPI) socket • $159 SRP (TWR-ELEV & TWR Peripheral modules not included) TM External Use 10 Available 15Oct NOTE: MCU socket not included on production version Software • Freescale CodeWarrior Development Studio for Microcontrollers V10.5 (CW-MCU10) • IAR EWARM V6.50 or higher • Processor Expert with MQX™ Lite RTOS integration for CodeWarrior or as standalone for integrating generated code into 3rd party IDEs Kinetis M: 3-Phase e-Meter Ref. Design (EMEA & A/P regions) Features • 5(100)A current range, nominal current is 5A, peak current is 100 A • Tested with range 0 – 240A (320A) • Four quadrant measurement, 85V...264V, 50/60Hz voltage range • Active and Reactive energy accuracy IEC50470-3 Class C, 0.2% • Line frequency measurement (for precision zero-cross detection) • Current transformers sensing circuit implementation • Cost-effective bill of materials (BOM) • Low-power modes effectively implemented, including the use of the built-in RTC • LCD display, 4x44 segments including charge pump. • Values shown on the LCD: V,A,W,Var,VA, kWh, kVarh, Hz • Magnetic field electronic Tamper detection via ELECTRONIC TAMPER MAG3110 • Built-in user push-button. LEDs pulse outputs (kWh, kVARh) • IEC1107 infrared hardware interface or Optically isolated RS232 interface • Comunication interface connector, could be use for (I2C Daughter Card) for connection to a ZigBee® network Software provided • Multiple advanced filter metering algorithms. MQX Lite real-time operating system • Comprehensive peripheral library drivers TM External Use 11 sensor and tamper buttons Kinetis M Series: 2-Phase e-Meter Ref. Design (Americas region) Features • Current Class: CL200 (TA=30A, Max. Current 200A, Starting Current 50mA) • Nominal Voltage: 120VAC ± 20%, Nominal Frequency: 60Hz ± 10% • Accuracy class: ANSI C12.20, Class 0.2 • Default Watt-hour (VAR-hour) constant: Kh=0.2 (range from 0.001 to 10) • Line frequency measurement (for precision zero-cross detection) • Current Sensor: Current Transformer (CTR 2000:1), type CHEM 9912192 • Low-power modes including the use of built-in RTC (Li-battery back-up) • 8x20 segment LCD including charge pump and one user LED • LED pulse outputs (kWh, kVARh) and optically isolated pulse output (via an optocoupler) • Electronic tamper detection via a magnetometer MAG3110 and an accelerometer MMA8491Q • ANSI C12.18-2006 Infrared Interface, optically isolated RS232 serial interface (optional only) • RF communication supporting 2.4 GHz IEEE 802.15.4 or 900MHz RF Mesh IEEE 802.15.4g/e + WPAN/IPv6 connectivity • Enclosure according to ANSI C12.10-2004, Form 12S (or Form2S) Software provided • Multiple advanced metering algorithms based on the Fast Fourier Transform • MQX Lite real-time operating system • Comprehensive peripheral library drivers TM External Use 12 Kinetis M: 1-Phase e-Meter Ref. Design (EMEA & A/P regions) Features • 5 to 80A current range (nominal current is 5A; peak current is 80A). 85 to 264V, 50/60 Hz voltage range • Accuracy class: B or C (active energy EN50470-3) and 3% or 2% (reactive energy EN62053-23) • Line frequency measurement (for precision zero-cross detection) • Cost-effective shunt-resistor sensing circuit implementation • Low-power modes including the use of built-in RTC (Li-battery back-up) • 4x22 segment LCD, including charge pump (values shown on LCD: V, A, W, Var, VA, kWh, kVarh, cos φ, Hz, time, date) • An upper and lower tamper meter cover monitoring with time stamp • IEC1107 infrared h/ware interface & Isolated (4kV) RS232 port for monitoring & s/ware upgrade • LED pulse outputs (kWh, kVarh) • EMC proven design (EN61000-4-2, EN610004-4) • RF connector supporting SubGHz or 2.4 GHz 802.15.4 communications • Xtrinsic 3-axis low power tilt sensor for electronics tamper detection (optional) Software provided • Multiple advanced metering algorithms: Filter-based, FFT method • MQX Lite real-time operating system • Comprehensive peripheral library drivers TM External Use 13 Kinetis M: 1-Phase Cost Optimized e-Meter Ref. Design (IND region) Features • Class 1, 5(30) capacitive power supply-based meter • 90–300 V operating range , 45–65 Hz & Back UP battery • Shunt for phase current sensing • Active and reactive energy accuracy per IS13779 • Current transformer for neutral current sensing • Neutral missing current transformer for neutral missing tamper condition • 4x22 segment LCD, including charge pump. Values shown on LCD: V, A, W, Var, VA, kWh, kVarh, cos φ, Hz, time, date) with Auto scroll menu display • IS13779:1999 compatible • Built-in RTC, capable of detecting tamper in power failure event Software provided • Multiple advanced metering algorithms: Filter-based, FFT method • MQX Lite real-time operating system • Comprehensive peripheral library drivers TM External Use 14 Kinetis M Series: Availability PK samples available now. MK samples available as per dates shown Sample Availability Seg. LCD Memory (Flash / SRAM) 10K # SRP (USD) - 64 / 16 KB $1.63 MK: Q114 - 128 / 16 KB $1.90 PK: now, MK: Q114 Part Number Meter Type ƩΔ ADCs MKM14Z64CHH5 1-ph 4 MKM14Z128CHH5 2-ph 4 MKM33Z64CLH5 1-ph 3 64LQFP 8 x 17 64 / 16 KB $2.01 MK: Q114 MKM33Z128CLH5 1-ph 3 64LQFP 8 x 17 128 / 16 KB $2.28 PK: now, MK: Q413 MKM33Z64CLL5 1-ph 3 100LQFP 8 x 38 64 / 16 KB $2.13 MK: Q413 MKM33Z128CLL5 1-ph 3 100LQFP 8 x 38 128 / 16 KB $2.40 MK: Q413 MKM34Z128CLL5 2-ph 4 100LQFP 8 x 38 128 / 16 KB 2.56 PK: now, MK: Q413 44LGA (5x5mm2) 44LGA (5x5mm2) TM External Use Package 15 (PK: Engineering) (MK: Production) Kinetis M Series: Summary •The world’s first ARM Cortex M0+ based Metrology MCU •Part of Freescale’s broad Metrology Portfolio •Enabling single-chip 1,2 & 3-phase meter designs •AFE, Security & HMI. Single crystal implementation •Single point of calibration during manufacture •Providing the highest accuracy metrology with regional feature support •Multiple ƩΔ ADCs with PGA •Supports neutral disconnect use case •Security features enable compliance with WELMEC and other global standards •Memory & peripheral protection •H/ware tamper detect with time stamping •Low power RTC, battery back up with tamper memory •Exceptional Freescale development Support •Certified 1,2 & 3-ph reference designs + metrology firmware •World-leading Metering Solutions Engineering Expertise •Free CodeWarrior IDE + Processor Expert & MQX Lite RTOS •Product Longevity Program (min. of 10 years MCU life) www.freescale.com/kinetis/mseries TM External Use 16 Kinetis W Wireless Connectivity Microcontroller Solutions RF Integration Integrating RF functionality to the Kinetis portfolio. Flexibility Ability to integrate the right combination of memories and peripherals to meet a variety of customer demands. Enablement Part of the Kinetis ecosystem including MQX and 3rd party support from IAR, KEIL or other ARM ecosystem providers TM External Use 17 Freescale IoT Offerings Edge products: • Connectivity •Intelligent Low cost Contextual Sensing. • Low power BAN/ PAN/ LAN Very smallSensing Xtrinsic • Low complexity right combination of • The Industrial grade & robust intelligent integration, logic and customizable software on the platform to deliver smarter, more differentiated applications. Fully integrated Short Range radios with best in class power performance, and Powerline Communications For IoT it provides Context: Identity, Activity, Location, & Time Kinetis Microcontrollers Vybrid Controller Solutions i.MX Applications Processors Design Potential. Realized. Rich Apps in Real Time. Your Interface to the World. Real-time, highly integrated solutions with best-in-class 2D graphics to enable your system to control, interface, connect, secure and scale. Industry’s most versatile solutions for multimedia and display applications, with multicore scalability and market-leading power, performance & integration. Industry’s most scalable ultra-low-power, mixedsignal MCU solutions based on the ARM® Cortex™-Mx and Cortex™M0+ architectures. QorIQ Processors Built on Layerscape Architecture Accelerating the Network’s IQ. Industry’s first softwareaware, core-agnostic networking system architecture for the smarter, more capable networks of tomorrow – end to end. Scalable Industry Standard Solutions, Software and Development Ecosystem TM External Use 18 What is KW0x? • World’s first integrated ARM Cortex-M0+ based sub-1 GHz smart radio − Integrates Kinetis MCU (ARM Cortex M0+ 128KFlash/16K RAM) with a sub 1 GHz transceiver • Targeted for Automated Meter Reading and mesh-networked smart sensors applications TM External Use 19 The Internet of Things: Metropolitan Area Networks (MANs) • MAN Network Characteristics: − Thousands of devices per gateway − Long distance between nodes − Many hops deep TM External Use 20 Freescale Smart Metering Solutions – Neighborhood Area Network Kinetis W KW2x ) Kinetis K & Security) Kinetis M Series Kinetis W KW2x HAN RF Series Kinetis W K0x Metrology Kinetis W K0x Communications & Processing RF Neighborhood Area Network Software MQX RTOS BeeKit Comm Stacks Metrology SW Security DLMS TM External Use 21 NAN Sub-1 GHz Target Applications Metering and Building Control Fire/Security Metering Thermostats Lighting control HVAC unit monitors Water heaters Window coverings Ceiling fan Smoke/heat sensing and monitor Fire alarm Room occupancy Intruder alarms Motion detectors Access control Medical/Healthcare/Wellness Liquid or gas flow detect and alarm Usage data collection Asset control (acceleration/theft) Maintenance monitoring Measurement data collection Humidity monitor and control Hazardous environment monitor Vibration alerts Wireless Sensors Networks Glucose monitors Cardiac rhythm tracking Hearing appliance remotes Infusion pumps Blood pressure monitoring Pulse oximetry monitoring Weight management monitoring TM External Use 22 Kinetis KW01 Wireless MCU (Sub 1-GHz) • CPU − − • Core 32-bit ARM Cortex M0+ 48MHz Core 128KB Flash and 16KB SRAM Radio transceiver, Sub 1-GHz − Supports 290-344MHz, 424-510MHz, and 862-1020MHz frequency bands − FSK, GFSK, MSK, GMSK and OOK modulations up to 600kbps − Up to -120dBm Rx sensitivity @ 1.2kbps − -18 to +17dBm Tx output power in steps of 1dBm • Ultra low power for battery operated devices − Typical consumption • Interrupt Controller Debug Interfaces Analog Memory Sub-1GHz RF DMA 128KB Flash RF I/O LowLeakage Wake Up Unit Timer 16KB RAM 32 MHz Oscillator RF Boost Packet Engine (AES) 66-byte FIFO Interfaces Clock 1 x IIC Phase-Locked Loop 16-bit ADC 2x 10-ch Timer Analog Comparator Peiodic Interrupt Timers 2 x UART Low Power Timer GPIOs 1 x SPI 6-bit DAC 1.7µA standby with 4.3µs wake-up time <50 uA/MHz CPU system run mode 16 mA Rx peak 20 mA Tx peak at 0 dBm, 33 mA at +10 dBm Xtrinsic Touchsensing FrequencyLocked Loop Frequency Oscillators Internal Ref Clocks Software − • ARM Cortex-M0+ 48 MHz System Simple-MAC, user modifies for their proprietary protocols System − 16-bit ADC, Cap Touch Sensors, I2C, UART, SPI, Timers − Operating Range: 1.8V to 3.6V, -40C to +85C TM External Use 23 Device Flash / Flex RAM Package MKW01Z128CHN 128 KB 16 KB 8x8 56-pin LGA KW01 MCU: Ultra-low Power Modes Mode CPU/Bus Freq. Peripheral Clocks Typical Idd @ 3V, 25C Recovery Time ENABLED 6.38mA (133uA/MHz) - DISABLED 4.44mA (93uA/MHz) - 48/- MHz Compute Operation* 3.98mA (83uA/MHz) - 4/1 MHz ENABLED 219uA (55uA/MHz) - DISABLED 170uA (43uA/MHz) - Compute Operation* 156uA (39uA/MHz) - Details 48/24 MHz RUN RUN VLPR MAXIMUM CPU/Bus frequency. Compute clocking option SUPPORTED 48/24 MHz RESTRICTED CPU/Bus frequency. Compute clocking option SUPPORTED LVD OFF. Flash programming NOT supported 4/1 MHz STOP WAIT (DEEP SLEEP) (SLEEP) 4/- MHz WAIT 48/24 MHz MAXIMUM CPU/Bus frequency. CPU in SLEEP, peripherals functional. Compute clocking option NOT supported DISABLED 3.88mA - VLPW 4/1 MHz RESTRICTED CPU/Bus frequency. CPU in SLEEP, peripherals functional. Compute clocking option NOT supported. LVD OFF. Flash programming NOT supported DISABLED 112uA 4us STOP - MCU in static state, LVD ON. Energy-saving peripherals functional with ADMA. AWIC detects wake-up source for CPU. - 309uA 4.3us VLPS - Same as STOP mode. LVD OFF. - 2379nA 4.3us LLS - MCU in low-leakage state retention power mode. LLWU detects wake-up source for CPU including LPTMR, RTC, TSI, CMP, and select pin interrupts. Fast wake-up. - 1738nA 4.6us VLLS3 - MCU in low-leakage mode, most internal logic OFF. All RAM contents retained and I/O states held. LLWU controls wake-up source for CPU similar to LLS mode. - 1344nA 53us VLLS1 - Similar to VLLS3 - 713nA 115us VLLS0 - Pin wakeup supported. LPTMR, RTC, TSI and CMP wake-up supported with external clock. Optional POR brown-out detection circuitry. - 411nA (POR) / 205nA (no POR) 115us *Compute Operation shuts off bus and system clock for lowest power core processing. Peripherals with an alternate asynchronous clock source can continue to operate. TM External Use 24 Features and Benefits Features Benefits ARM Cortex M0+ CPU core Lowest power industry core Single-chip with MCU + Radio + Memory Save size and cost versus a 2 to 3 chip solution High radio link budget Very long point to point wireless range without the need for repeaters or costly amplifying devices. Flexible RF configuration Adapt to global standard requirements and local (regional) regulations TM External Use 25 MKW01 Enablement TM External Use 26 KW01 – Development System • • • • • • Modular Reference Board (MRB). Can run stand-alone with onboard mini-USB. Can plug into TWR-RF-MRB to provide access for Tower enablement. SMA for Antenna or cable. Available with 30 or 32 MHz XTAL for frequency/spurious management. Available for 868/915 MHz, 434 MHz bands, can be tuned to 315 MHz. TM External Use 27 Leveraging the Kinetis Ecosystem for KW01 HW BDM Debugger/Emulators Radio Test Tool SMAC IEEE 802.15.4g IPv6 TM TM External Use 28 IPv6/6loWPAN (Q4 ‘13) IDE: Tools Compliers, Debuggers Tower EVBs & System Design TM KW01 Development Kits • • Interface Board: Standalone or in Tower System • Standalone or in Tower System Leverages the Tower system − − − − • RF Daughter Board Quickly combine Tower Modules to build a prototype of your application Software support from Freescale and Third Parties Growing community of Third Party hardware support On-line community: www.towergeeks.org Kit Features − − − − − − Flash reprogramming and in-circuit hardware debugging USB port to interface with PC Configurable I/O access LEDs and switches for demonstration, monitoring and control Out-of-box application Quick Start Guide TM External Use 29 Board Connectors Elevator Part Numbers: MRB-KW019032NA $99 MRB-KW019032EU $99 MRB-KW019030JA $99 An antenna needs to be purchased before using this kit. In addition, customer requiring Tower integration need the RF kit (TWR-RF-MRB) Kinetis V Series TM External Use 30 Kinetis Key Pillars by Family L E K X W M V Low Power 5V Robustness High Performance & Rich Integration Extreme performance & integration Integrated RF Connectivity Integrated metrology engine Motor and Power Conversion 48MHz Cortex M0+ Up to 48MHz Cortex M0+ Up to 180MHz Cortex M4 Up to 400MHz Cortex M-next Up to 50MHz Cortex M4, Cortex M0+ Up to 48MHz Cortex M0+ Up to 200MHz, Cortex M4, Cortex M0+ 8KB to 512kB Flash 8KB to 128kB Flash 32KB to 2MB Flash 0KB to 16MB Flash 32KB to 512kB Flash 32KB to 128kB Flash 16KB to 2MB Flash Up to 128KB RAM Up to 16KB RAM Up to 256KB RAM Up to 512KB RAM Up to 64KB RAM Up to 32KB RAM Up to 256KB RAM Now! Now! Now! Q2’14 Q4’13 Q4 ‘13 Q1 ’14 Leading Performance – Low Power – Scalability – Industrial Grade reliability & temp Freescale Bundled IDE, RTOS & Middleware – Rapid Prototyping Platform – Broad ARM Ecosystem Support TM External Use 31 Kinetis V-Series Motor & Power Control • Full Kinetis portfolio compatibility targeting low cost, stand alone motor control, to high performance digital power conversion • Optimized for processing efficiency with performance ranging from 75MHz to beyond 200MHz • ARM architecture with best in class, high speed capture and control peripherals for motor control and power management applications • Enablement and tools built around reducing customer development time and cost, whilst increasing ease of use. TM External Use 32 Performance Kinetis Motor Control Landscape • 48MHz M0+ core • FlexTimer • 2x 12-bit ADC @ 1uS • 24-48MHz M0+ core • 16 to 64KB Flash • LP Timer • Cost sensitive • ADC @ >2uS • 16 to 32kB • Very cost sensitive • 75MHz M0+ core • FlexTimer • 2x12-bit ADC @ 1uS • 32 to 128kB Flash • System integration • 100+ MHz M4 core • Multiple FlexTimer’s • 2x12-bit ADC @ 1uS • 64 to 128kB Flash • Improved math features (DMA, FPU) • 200MHz M4 core • M0+/M4 Secondary core • Multiple eFlexPWM • 2x12-bit ADC @ 200nS • Flash >1MB • I-Cache • ENET / USB • 150+ MHz M4 core • eFlexPWM • Multiple Timers • 2x 12-bit ADC @ <500nS • Flash >128kB • System integration • FPU Application Complexity • • • • • Universal Motors DC Motors 1phase Motors Ceiling Fans Hand Held Tools • 3Phase Sensor’d FOC Control • 3Phase Sensorless FOC motor with Low Dynamic Control • Air Movers TM External Use 34 • 3Phase Sensorless FOC motor with High Dynamic Control • Fluid Movers • Integrate PFC • Software Modeling • • • • • Non stnd multi pole motors Advanced Motor Control with comms Complex Servo motors Dual Motor Control AC Drives • Multi-domain Motor Control • w/ comms • w/ USB • w/ ENET Performance Kinetis Power Control Landscape • 100MHz M4 core • eFlexPWM • FPU • 2x12-bit ADC @ <500nS • 64kb to 256kB Flash • 50-75MHz core • FlexTimer • 2x12-bit ADC @ 1uS • 16kB Flash • Very cost sensitive • 150 MHz M4 core • High Res PWM with Nano edge • FPU • 2x12-bit ADC @ 300nS • 64kb to 256kB Flash • 8kb RAM as Cache • System integration • 200MHz M4 core • High Res PWM with Nano Edge • 2x12-bit ADC @ 200nS • 128KB to 256KB Flash • 8kb RAM as Cache • 200MHz M4 core • M0+/M4 Secondary core • High Res PWM with Nano Edge • 2x12-bit ADC @ 200nS • Flash >1MB • I-Cache • ENET / USB Application Complexity • • • Power Factor Correction DC / DC Brick • • • • • Offline Solar Inverter Offline Battery Inverter Micro Inverter Battery Inverter Online UPS Offline UPS TM External Use 35 • • • • • Digital Power - 1-ph Server Power Supply Induction Hob Online UPS Low efficiency AC / DC Rectifier • • • • Digital Power - 3ph Multilevel Inverter Grid Tied Solar Inverter High efficiency AC / DC Rectifier • Multi-domain Power Control • w/ comms • w/ USB • w/ ENET V Series Family : Scalable Solution Increasing performance and integration Key IP for Control Applications Core Memory Motor Control Timers Enhanced Timers ADC LQFP PinOut CMP DAC 150MHz M4 w/ DSP & FPU 256kB Flash 2 x 8Ch FlexTimer 12Ch eFlexPWM w/Nano Edge 2x 300nS 100, 64,& 48 4x CMP with 6b DAC 1 x 12b DAC MKV3x 100/120MHz 100MHz 120MHz & FPU M4 w/DSP 128 -512kB Flash 2x 8ch FlexTimer None 2x 1uS 100, 64, 48 & 32 2x CMP with 6b DAC 1 x 12b DAC MKV1x 75MHz 75MHz M0+ 32kB Flash 1x 6ch FlexTimer None 2x 1uS 48 & 32 2x CMP with 6b DAC 1 x 12b DAC MKV4x 150MHz Scalable IP according to application needs TM External Use 36 KV1x 75MHz: Family MC Part Number MKV10Z32VLF7 MKV10Z32VLC7 MKV10Z32VFM7 MKV10Z16VLF7 MKV10Z16VLC7 MKV10Z16VFM7 Max. Freq. Pin Count Package 75MHz 75MHz 75MHz 75MHz 75MHz 75MHz 48 32 32 48 32 32 TM External Use 37 LQFP LQFP QFN LQFP LQFP QFN Flash SRAM DMA FLL FTMs DAC 32K 32K 32K 16K 16K 16K 8KB 8KB 8KB 4KB 4KB 4KB 4-ch 4-ch 4-ch 4-ch 4-ch 4-ch Yes Yes Yes Yes Yes Yes 1x6ch; 2x2ch 1x6ch; 2x2ch 1x6ch; 2x2ch 1x6ch; 2x2ch 1x6ch; 2x2ch 1x6ch; 2x2ch 1 1 1 1 1 1 New MCU Solution Advisor: Interactive Product Selector Guide • Web-based application featuring an interactive MCU product selector for 32-bit Kinetis ARM® Cortex™ - M4 MCUs. • Helps identify best MCU choice by applying dynamic filters based on: − Operating characteristics − Packaging options − Memory configuration − Peripheral hardware library www.freescale.com/solutionadvisor TM External Use 38 TM www.Freescale.com © 2014 Freescale Semiconductor, Inc. | External Use