Unit #:
13-M018
DEALER:
CUSTOMER:
Medix Specialty Vehicles
Demo
Street or P.O. Box
City, State, Zip
VIN#:
1FDXE4FS2DDA38954
Chassis Model Yr
2013
Type III-AD 170
MEDIX Model
Ford E-450 XL Cutaway, 6.8L Gas, 158" WB, 14,500 GVWR
CHASSIS
170"L x 96"W x 72" Interior Headroom
BODY
QTY
1
Description
STD/OPT
13-M2-FG Chassis & Conversion
01-
Flooring & Interior Colors
1
STD
1
STD
1
1
STD
STD
1
100030
Cabinets: Laminated Wood- (Specify Color)
Color: TITANIUM
Upholstery: (Specify Color)
Color: BLACK
Brand: EVS
EVS Cushions & Corner Padding
Flooring: Lonseal- LonPlate (Diamond Plate) (Specify Color)
Color: GUNPOWDER 424 TX
Dri-Dek in Exterior Compartments- Black
021
STD
1
99-0462
1
1
1
Body & Chassis
M-2 Standard Configuration
All Exterior compartments & interior door panels coated with light gray colored Herculiner material.
New England Compliance Package: Type I and III, to Include- (2) TecNiq LED S34-AA09-1 Amber marker lights, (1) each side of body at front corner
extrusion. Wire to Turn Signal Circuit
- Curbside of Body rear-most Red Warning light mounted as far to rear as possible
- Curbside of Body forward Red Warning light mounted as far to front as possible
- Reflective Striping, Door Open Protection: .50" Red reflective striping around interior
door pan of all body doors.
- Mud Flaps, front, Black Rubber- Mount on front edge of running boards
- Quick Disconnect Suction System- White faceplate w/Quick Connect Nipple
Lights, Compartment: TecNiq Flexible LEDs; 9", 18", 36" 45", 54", Set of 9 Lights, ILOS.
99-0423
Only (8) lights Required.
Locate: Compartment #1- (1) 45" E41-W010V-1
Compartment #2- (2) 18" E41-W04V-1
Note Compartment #3- (2) 18" E41-W04V-1 w/1/2 height #3
Compartment #4- (1) 36" E41-W08V-1
Compartment #6- (2) 54" E41-W012V-1
Compartment #1 SS Forward: Smooth Aluminum body, O2 Universal "M" or "H" cylinder storage,
STD
Door w/gas strut hold-open, Sealed access to paddle handle in door panel, Stainless steel sill
protector.
Compartment #2 SS Center: Smooth Aluminum body, Open Storage, Double doors w/gas strut
STD
hold-opens. (1) Adjustable aluminum shelf w/DA finish. Sealed access to paddle handles in door
panel, Stainless steel sill protector.
Page 1 of 6
1
Compartment #3 SS Rear: 1/2 Height (same as #2), Smooth Aluminum body, NO
STD
Inside/Outside access, (1)- adjustable shelf w/DA finish. Door w/gas strut hold-open. Sealed
Modified access to paddle handle in door panel, Stainless steel sill protector. Can- 33-100737; Door33-100671, Frame- 33-100731, Skin- 33-100753
1
200280
2
STD
1
STD
1
STD
1
STD
1
STD
1
STD
3
99-0250
1
1
200200
200230
1
1
1
1
200277
99-0390
STD
STD
2
STD
2
200160
1
1
200310
Note
200320
3
4
4
1
1
1
1
1
STD
STD
STD
STD
STD
STD
STD
STD
1
300030
03-
Shelf, Adjustable Aluminum w/DA finish, Exterior Compartment
Locate: Compartment #3
Rear Entry Doors: Dual door system w/exterior/interior, locking paddle handles; fixed glass
windows and Cast Grabber hold-opens. Sealed access to paddle handles in door panels.
Stainless steel sill protector. Two-piece interior door panel.
Compartment #4/5 CS Forward: NO body above floor, ALS Cabinet w/Inside/Outside access,
Full height, single Door w/gas strut hold-open. Bottom section aluminum body w/roll-out (1) battery
tray w/removeable, latching door. Sealed access to paddle handle in door panel. Stainless steel
sill protector.
Curbside Entry Door: Single door system w/exterior/interior, locking paddle handles; window
w/sliding glass and screen; Gas strut hold-open. Sealed access to paddle handles in door panel.
LED Step well light. Stainless steel sill protector. Access covers for Nader pins. Two-piece interior
door panel.
Curbside Entry Door Stepwell: One-piece construction; (1) .125" smooth aluminum welded into
door opening coatd with Herculiner material. Stainless steel threshold trim. Dri-Dek insert on floor.
Compartment #6 CS Rear: Smooth Aluminum body, Vertical backboard storage w/(2) seat belts
restraints (1) in upper Backboard section, (1) lower across Backboard and Stair Chair Section.
Door w/gas strut hold-open. Sealed access to paddle handles in door panel, Stainless steel sill
protector. Interior/Exterior access w/Lexan door and round SouthCo latch. NOTE: Divider to be
located 11" from rear wall.
Divider: Aluminum w/DA finish, vertical in back Board Compartment
Locate: Compartment #6
Shelf, Smooth Aluminum w/lip, DA finish, Adjustable for Backboard Divider, 7.5" wide. PN33-101637.
Locate: Compartment #6 on RH side of Divider
Power Door Locks: All Entry and Compartment Doors, wired to OEM door lock system.
Power Door Locks: Stealth Switch
Locate: Driver's side front grille
Running Boards: Grip Punched, Ford/Chevy/GMC Type III
Rear Bumper Pods, Cast Aluminum w/Medix Logo- ILOS ADP Pods
Fender Flares: Stainless Steel
Rear Bumper: ADP corner pods w/Dock bumper pads, Center grip-strut flip-up step, powder
IV Hangers: (2) Cast black rubber fold-down over knee area of Cot and Squad Bench
IV Hanger, flush mount, fold down, rubber Cast- IATS
Locate: Over Chest area of Cot and Squad Bench
Window, fixed, 18" x 36" over Squad Bench
To have additional back pad over top of window
Window, Sliding- ILOS Fixed window
Specify Location: Side Entry Door
Mirrors, OEM: (1) each cab door, (1) on interior windshield
Wheel Covers: Stainless steel covers w/Valve Extenders
Stone Guards: Lower body corners, ADP
Kick Plate, Rear: ADP, below rear doors across to corner posts
Rub Rails: C-Channel, tapered ends, Lower Body off-set mount with neoprene spacers.
Fuel Fill Bezel: Cast aluminum
Fuel Fill Scuff Plate: Stainless steel, below fuel fill bezel
Undercoating: Per Ford QVM Guidelines
Brake, Turn & Back-Up Lights
Lights, Brake/Tail, Turn, Back Up: Whelen 6x4 LED Pkg, ILOS
Page 2 of 6
2
300060
1
STD
4
OPT
Lights, Turn Arrow: Whelen 6x4 Amber LED, Front of body below outboard 9x7 warning
lights- IATS
DOT Marker Lights: TecNiq LED, rubber grommet bezels; (7) S34-AA09-1 Amber- (5) on front of
body as Marker lights, (2) side facing on rear extrusions as Turn Signals; (7) S34-RR00-1 Red- (5)
on rear of Body as Marker lights, (2) side facing as Turn Signals.
Marker/Directional Lights: TecNiq LED, Rubber grommet bezels; (4) S34-AA-09-1 Amber- (2)
side facing on each front corner extrusion as (1) marker and (1) turn signal each side.
04-
Electrical, Power Distribution, Control Center & Interior Lighting
2
STD
1
1
400005
400030
Batteries: OEM, 650 C.C.A.
Locate: (1) Under hood, (1) In roll-out tray in Compartment #4/5
Located in electrical cabinet and deletes Cole-Hersee switch
Battery Switch, Automatic: TST CDR-357- ILOS Cole-Hersee
Back-Up Camera, Color Monitor in Cab
Locate: Camera mounted off lower RH corner of center rear Amber light; Monitor mounted
on cab windshield rear view mirror (Boyo VTM600M)
1
STD
2
1
STD
400010
11
400098
1
STD
1
400230
1
99-0014
2
STD
1
STD
1
99-0550
1
3
1
3
1
1
1
1
Front Console/ Switch Panel: Formed ABS body attached to engine cover. Switch panel:
Engraved black plastic with (12) LED lighted switches for Emergency Master, Primary/Secondary
Modes, Light Bar, Siren/Horn, Left, Rear and Right Floods, Back-Up Alarm, Module Disconnect.
Siren mounted in engraved panel below switches.
Antenna, Radio Coax Cables: Terminated behind driver's seat w/Power & Ground for each
Antenna, Radio Coax, 12VDC Power/Ground, Additional
Locate: Behind rear A/A panel
Dome Light: Whelen LED w/white flange 80C0EJCR, 2-banks of four (4) lights; 1- bank of
three (3) lights switched separately with Hi/Lo functions- ILOS
2-banks of four (4) lights; 1-bank of three (3) lights, switched separately with Hi/Lo functionsILOS
Action Area Light: 16", 12 VDC LED Strip light, 18 diodes and On/Off switch on rear control
panel
Shoreline: Auto Eject, 125 VAC, 20-Amp, 60 Hz straight-blade inlet w/hinged, weatherproof
cover- ILOS
Light, Indicator, Red LED- for Shoreline system
Locate: Above Shoreline inlet onStreetside of body
Switch: Momentary Disable for Scene/Load Lights. Located on Curbside Wall and Rear Streetside
wall in standardized position in 2-position plastic bezel.
Timer: 5-minute check-out, wired to CS High mode dome lights
Switch, Momentary, 15-Min Timer for Dome Lights. Switch 5305R, Timer- 3194, PanelMX01511.
Locate: On Curbside Wall in Standardized position.
STD
Inverter: Pre-Wire w/switch on rear panel. Pre-wire located in Lower Walk-Thru Cabinet "E"
Modified
12 VDC Outlets: (1) in Action Area, 1- in ALS top of lower section below fixed divider, (1) in
STD
2nd Action Area
400020 12 VDC Charging Plug, cigar style- IATS
Locate: Upper ALS above fixed divider
STD
125 VAC Outlets: Duplex, located 1-in Action Area, 1- in ALS top of lower section below fixed
Modified divider, (1) in 2nd Action Area
400100 Duplex Outlet, 125 VAC- IATS
Specify Location: Upper ALS above fixed divider
STD
Modified Battery Conditioner: Power Source, 45-Amp- Lower Walk-Thru Cabinet "E"
STD
Spotlight: 400,000 CP handheld, hard wired, w/momentary On/Off switch, located in cab
STD
Rear Switch Panel: Engraved black plastic panel with (9) LED lighted switches for Dome Lights
(3), Vacuum (1), Vent (1), A.A. Light (1), Inverter (1), AC/Heat (1), Fan Speed (1), Thermostat.
Page 3 of 6
051
Warning Lights & Sirens
500114+ All LED Light Package- Ford, Chevy MSV II Type III-AD Models ONLY
DELETE Light Bar and all Medix standard halogen Warning Lights. Add LED lights with
chrome flanges in all standard locations.
Front of Body: Add (7) 9x7 Whelen LEDs- Specify pattern by LED Color (6) Red and (1) Clear
in R-R-R-C-R-R-R pattern. Outer (2) lights and (1) Center light flash on K-Spec flasher. Inner
(4) flash independently on Light Bar switch on front console.
2
500380
2
STD
4
500127
2
500127
1
1
2
1
STD
500420
STD
STD
063
1
1
1
1
Sides of Body: (2) 9x7 Red LEDs each side in upper corners
Rear of Body: (4) 9x7 Red LEDs- (2) in upper corners; (2) Mid-Body upper portion of rear
windows wired as Warning/Brake; (1) 9x7 Amber LED in center rear.
Brake, Turn & Back-Up Lights: 6x4 LEDs
Lights, Warning, Intersection Lights: (2) 7x3 Red LEDs on Front Fenders; (2) 7x3 LEDs
above rear Wheel Wells- wired to Pri/Sec Modes
Light, Warning, Whelen 9x7 LED, Amber- IATS
Specify Lens Color: Clear
Specify Location: Lower portion of rear window. To flash with Center Rear Amber
Lights, Warning, Grille: Whelen 5x2 Red LED, on center grille bar, w/Clear lenses and flanges.
Light, Scene, Whelen 9x7 LED w/8-32-degree optics- ILOS
Locate: (2) each side of body
Light, Load, Whelen 9x7 LED w/8-32-degree optics- ILOS
Locate: (2) on Rear of body
Flasher: Dual mode flasher for Warning Light system.
Wig-Wag Headlamps, Sound-Off
Siren Speakers: dual 100 Watt drivers mounted through the front bumper
Siren: Whelen 295 SLSA1 Control Head
Oxygen, Vacuum & Miscellaneous Items
STD
600100
Oxygen Outlets: Quick-connect style, 2-in Action Area, 1-over Squad Bench
Oxygen Outlet, Green Face Plate, Additional
Locate: In Standardized position in ceiling
Suction Aspirator System: SSCOR disposable container mounted in recess below Action Area,
STD
w/SSCOR gauge and quick-connect on Action Area panel; GAST vacuum pump mounted in
Modified
Lower Walk-Thru Cabinet "E"
Oxygen Cylinder Retention: Universal for "M" or "H" cylinder, steel w/3-spring buckle straps and
STD
top collar, powder-coated Safety Yellow color- in Compartment #1.
STD
O2 Regulator: Amvex, 50psi, pre-set
07-
AC / Heat
1
STD
HVAC System: High capacity Free Blow combunation Heat-AC system, multi-speed fan and
thermostatic control in Action Area. HVAC unit mounted in Front bulkhead over Walk-Thru.
08-
Cabinets, Hardware & Miscellaneous Items
1
STD
1
1
Main Streetside Wall Cabinets: Specify required configurationC-1 Cabinet Configuration- CPR Seat w/2nd Action Area (22" Wide), Custom Cabinets, See
Drawings
Main Wall aisle-facing Cabinets will have (1) adjustable laminated wood shelf in each and sliding
Lexan doors with full height extruded handles. Recessed cabinet for suction aspirator container
.See Prints for Configuration.
Corian Countertop- 1st / 2nd Action Area, Color: Gray Mist HL-027 w/Eclipse HL-039 top and
800090
perimeter accent lips. To extend over the edge of cabinet main
Action Area Overhead Cabinet: Full-height and depth aisle-facing cabinet w/sliding Lexan doors
STD C-1
and full height extruded handles.
Page 4 of 6
2
99-0454
Restocking Feature, Interior Cabinet- Sliding Plex door w/hinged frame w/(2) Adjustable
Soft Down stays and (2) sash latches
Locate: (1) Action Area Overhead Cabinet; (1) Upper Rear Main Cabinet
1
Action Area Panel: Full height and length of Action Area shelf to Corner Cabinet. Contains Rear
STD
Switch Control panel, Vacuum gauge, (2) Oxygen outlets, (1) 125VAC duplex outlet, (1) 12VDC
Modified
cigar-style outlet.
1
OPT
Cabinet, Corner, Action Area: Full height below A/A overhead and 12-inches wide at
forward end of A/A shelf w/single 1/2" Plexi door and SouthCo 2" SS latch. Cabinet extends
inboard to O2 acess window. A/A panel deceased in width to allow cabinet to extend to
outboard wall.
1
STD C-1
Cabinet overhead, forward of CPR Seat: Beveled cabinet w/ (2) hinged 3/8" Lexan doors
w/round SouthCo latches on bevel side.
1
STD C-1
CPR Seat, 2nd Action Area: CPR seat w/hinged, latching lid, storage under seat w/TriMark latch,
EVS formed back rest and seat cushion; 2nd Action Area w/(1) 12VDC outlet, (1) 125VAC outlet
1
1
800100
DEL
1
OPT
1
OPT
1
1
1
2
1
1
1
1
1
1
1
1
CPR Backrest, Fold-Down Shelf- ILOS
DELETE Standard Cabinet overhead, rear of CPR Seat: Angled cabinet.
Cabinet overhead, rear of CPR Seat: Full-height and depth aisle-facing cabinet w/sliding
Lexan doors and full height extruded handles. Full height and width aft of CPR Seat and
above 2nd action area. Incorporate angled cabinet to make cabinet full width rear of CPR
seat.
Cabinet Aft of 2nd Action Area and Above Compartment #3: Full height and width from A/A
shelf to rear wall with (1) adjustable shelf and dual 1/2" Plexi doors w/Southco 2" SS
latches. Need room on left side of cabinet opening for mounting interior grab handle.
STD C-1 Sharps/Waste Tilt-Out Cabinet: Below 2nd Action Area w/round SouthCo latch.
Technician's Seat: EVS Rear facing automotive style chair with Type II lap/shoulder belt mounted
on swivel base.
STD C-1 Seat Base: EVS SB-2 Swivel Base for EVS Technician's Seat
Front Bulkhead Cabinets: Electrical Cabinet located above Tech Seat w/round SouthCo latching,
STD C-1
vented door; HVAC cabinet and filtered air return above Walk-Thru.
Walk-Thru Cabinets: Upper cabinet- open storage w/hinged, round SouthCo latching door; Lower
STD C-1
cabinet open storage w/hinged, round SouthCo latching door, vented rear wall.
DELETE Standard Cabinets (2) Above ALS
DEL
STD
ALS Cabinet: Custom Configuration: This cabinet is now a floor-to-ceiling configuration.
Lower Half- Locking storage w/LonPlate flooring, dual .50" Plexiglass doors w/locking,
round SouthCo latches; Fixed divider between upper and lower sections covered
w/LonPlate flooring; Upper Half- w/ dual .050" Plexi doors w/round SouthCo non-locking
latches and (1) adjustable shelf w/ LonPlate flooring.
Glove Box Holders: (3) w/hinged, powder-coated aluminum door, in pad above Curbside Entry
STD SB-1
Door
Cargo Net @ head of squad bench- Enhanced version for M-2 compatible w/CS Door
OPT
Overhead Glove Boxes
STD
Squad Bench: 72" Long, 3-Belted seating positions, full length hinged, latching lid for access to
Modified interior storage, full length upholstered cushion.
Back Pad, Additional over Curbside Window: Full length "U"-shaped cushion above the CS
99-0484 window over the SB- Matches color and design of lower backrest cushion- IATS. See Prints
OPT
OPT
Sharps, Tilt-out at head of Squad bench facing Aisle- See Prints, PN- 19-0017
Page 5 of 6
1
OPT
1
STD C-1
1
1
1
1
1
Waste, Tilt-out at foot of Squad bench facing Aisle- See Prints, PN- 19-0017
Cabinet, Squad Bench Overhead: w/ (2) flip-up 1/2" Plexi doors with round SouthCo latches.
Inside/Outside Access to Compartment #6: With single 1/2" Plexi hinged door w/round
SouthCo latch
Locate: On LH side of Compartment #6 interior cabinet wall for access to shelves in
Compartment #6
800250 Stainless Steel Riser on Squad Bench Face
800260 Stainless Steel Riser on Streetside Lower Main
Cabinet, Rear Overhead: Cabinet over rear door opening w/ (1) flip-up 1/2" Plexi door w/round
STD C-1
SouthCo latch.
800060 Radio console with map pocket, located on floor behind ABS console between seats
See Print 11-0046
99-0375
1
STD
1
800050
3
STD
2
99-0309
3
STD
6
STD
1
1
DEL
900050
10-
Paint & Lettering
1
STD
Paint: Body all OEM White
09-
1
1
2
Assist Rail: 1.25" Stainless steel w/radiused ends, overhead in center of unit.
Assist Rail: Stainless steel w/radiused ends- IATS
Grab handles: 12" x 1.25" dia. stainless steel mounted on each rear entry and curbside entry door
Grab Handle: 18" x 1.25" Stainless steel w/radius ends (ASC).
Locate: Inside rear Entry Doors (1) on Streetside wall; (1) on Curbside interior wall of
Compartment #6.
Reflective Striping- Alternate Red/White chevron pattern on smooth aluminum kick panelmounted on each rear entry and curbside entry door
Reflective Striping, Door Open Protection: .50" Red reflective striping around interior door pan
of all body doors.
Cots & Miscellaneous Items
DELETE Standard Ferno 175-4 Dual position Cot Mount
Cot Mount: FW #175-3 ILOS- Single position, Removable, Center Mount
Cot Model: FERNO ______
1000100 Roof Star ONLY, INSTALLED
STD
STD
SHIP LOOSE
Star-Of-Life Decal Pkg: Ship Loose is Standard
Fire Extinguisher: (2) 5 lb- Ship Loose is Standard
TOTAL ORDER
I have reviewed this Order and find it to be acceptable and ready
to build.
_______________________________ Date: ________________
Dealer Signature
I have reviewed this Order and find it to be acceptable and ready
to build with the addition of the attached, approved changes.
_______________________________ Date: ________________
Dealer Signature
Due to on-going product improvements and the changing requirements of the ambulance industry, MEDIX Specialty Vehicles, Inc. reserves the right to
change product specifications and related products without prior notice and without any obligation to change prior products or parts. ALL PATENTS
RIGHTS RESERVED.
Page 6 of 6