FEDERAL SIGNAL
Safety and Security Systems
Protecting people and our planet
2014
Alerting & Notification Systems Product Selection Guide
1
Table of Contents
Electro-Mechanical Sirens and Controllers
2001-130, 508, Eclipse8 and Model 2 Sirens...................3–4
Controllers........................................................................4–5
Options................................................................................. 6
IP-Enabled Siren Options..................................................... 7
Sample Ordering Configurations....................................8–9
Electronic Sirens and Controllers
Directional Speaker Arrays ............................................... 10
Modulator Speaker Arrays................................................ 11
Ultravoice™ Electronic Controllers..............................11–12
Options and Accessories.................................................... 13
IP-Enabled Siren Options................................................... 14
Sample Ordering Configurations...................................... 15
Communications and Messaging Software
SmartMsg Software and Hardware............................16–20
Federal Commander Software.......................................... 21
Sample Ordering Configuration....................................... 22
SS2000+ and Radio Control Information.......................... 23
Indoor Solutions
Ultravoice UVIC and UVRI Controllers.............................. 24
Ultravoice IC Options......................................................... 25
Selectone® Amplified Speakers......................................... 25
Speakers and Strobes......................................................... 26
Informer™ and Options.................................................... 27
Informer-Ip™ and Options................................................ 28
Antennas and Cables......................................................... 29
Batteries.............................................................................. 30
Miscellaneous Products and Services................................ 30
Limited Warranty............................................................... 31
2
Electro-Mechanical Sirens
2001-130 and 508 Sirens
Models 2001 and 508 are single tone, rotating directional
electro-mechanical sirens capable of producing 130db (2001)
and 128dB (508) sound level (respectively) at 100 feet. Federal
Signal offers a wide variety of options for activating, controlling,
monitoring, communicating and powering sirens. Pole mounts are
included in siren part numbers.
2001-130
508
2001-130
Electro-mechanical rotating siren, 130 dB(C) 800Hz
Approximate weight: 450 lbs, 204 kg.
508-128
Electro-mechanical rotating siren, 128 dB(C), 500Hz
Approximate weight: 550 lbs, 216 kg.
Eclipse8 Siren
The ECLIPSE8 is a single tone omni-directional siren capable of
producing a 115 dB sound level at 100 feet. Pole mount is standard,
order RME for roof mounting. For remote control operation see
One-way and Two-way Control for further information.
Eclipse8
RME
Eclipse8
Omni-directional siren, 115 dB(C) 525Hz
Approximate weight: 255 lbs., 116 kg
Roof mount equipment
Model 2 Siren
MODEL 2
Model 2 is a 102dB single tone omni-directional siren enclosed in
sheet metal housing. Offered in 120 and 240VAC, this universal motor
siren can operate from either DC or AC single-phase. Roof mount is
standard and a pole mount is optional by ordering model PMS separately. Model RC2W motor starter is required to operate the siren.
Optional PBS-4 push-buttons can be used to activate the siren starter.
For remote control operations see One-way and Two-way Controllers,
Models FC and FCTB, for additional information.
Continued on next page
3
3
Electro-Mechanical Sirens
2-120
Continued from previous page
Model 2 Siren 120VAC/DC
Approximate weight: 80 lbs. 36kg
RC2W-120
Motor control
Approximate weight: 14 lbs., 6 kg.
Model 2 Siren 240VAC/DC
Approximate weight: 80 lbs., 36 kg.
2-240
RC2W-240
Motor control
Approximate weight: 14 lbs., 6 kg.
PMS
Pole Mount Stand
Approximate weight: 66 lbs., 30 kg.
PBS-4
Push Button Station with 4 buttons
Controllers for Electro-Mechanical Sirens
One-Way Controller/120VAC to Battery Operation
One-way FC Controllers include a NEMA4X aluminum control cabinet, a 120VAC to nominal
13.6Vdc battery charging system, two 48VDC contactors, and NEMA 3R aluminum battery
cabinet. Can decode DTMF, Two-Tone Sequential, single-tone, EAS, POCSAG Decoder and
Federal FSK. Batteries, antenna and cable are not included and are sold separately.
DCFCB
DCFCBH
FC Controller, with High Band 155-174 MHz radio
Approximate weight is 224 lbs, 102 kg.
DCFCBU
FC Controller, with UHF Band 450-470 MHz radio
Approximate weight is 224 lbs, 102 kg.
FC Controller, radio not included
Approximate weight is 224 lbs, 102 kg.
Two-Way Controller/120VAC to Battery Operation
Two-way digital controllers include a timer with four preset programs and standard sensor
package for current, rotator, and intrusion. This controller also includes a NEMA 4X aluminum
control cabinet, 120VAC to nominal 13.6Vdc battery charging system, two 48VDC contactors and
NEMA 3R aluminum battery cabinet. Can decode DTMF, Two-Tone Sequential, single-tone, EAS,
POCSAG Decoder and Federal FSK. Two-Way DTMF configuration requires ES-PROG-DTMF (sold
separately). Batteries, antenna and cable are not included and sold separately.
DCFCTBD
Two-Way Digital FC Controller, does not include radio
Approximate weight: 235 lbs, 106 kg.
DCFCTBDH
Two-Way Digital FC Controller, with high Band 136-174 MHz radio
Approximate weight: 235 lbs, 106 kg.
DCFCTBDU
Two-Way Digital FC Controller, with UHF Band 403-470 MHz radio
Approximate weight: 235 lbs, 106 kg.
DCFCTBD-IP
Two-Way Digital FC Controller, IP-Enabled
Approximate weight: 235 lbs, 106 kg.
4
4
Controllers for Electro-Mechanical Srens
One-Way Controller/120VAC Operation (no batteries)
FC controllers operate from 120VAC and can be used with 2001-AC systems for
nominal 240VAC operation. Cabinet enclosure is NEMA 4 powder coated. Can
decode DTMF, Two-Tone Sequential, single-tone, EAS, POCSAG Decoder and
Federal FSK. Models FCH and FCU include a radio. Antenna and cable are not
included and sold separately.
FCH
FC
Control system without radio
Approximate weight: 10 lbs, 5 kg.
FCH
Control system with High band 150-174 MHz radio
Approximate weight: 10 lbs, 5 kg.
FCU
Control System with UHF band 450-470 MHz radio
Approximate weight: 10 lbs, 5 kg.
One-way Controller Options
FS-PL1
Tone coded and digital coded squelch decoder
For use with two-tone frequencies >400Hz
FS-PL2
Tone coded and digital coded squelch decoder low
For use with two-tone frequencies <400Hz and non
two-tone protocols.
Two-Way Controller/120VAC Operation (no batteries)
FC controllers are powered via 120VAC and can be used with 2001-AC systems
for nominal 240VAC operation. Two-way FC digital controller includes six preset
siren timer functions, a tone generator, is PA compatible and offers two-way status
monitoring. Standard monitoring functions include: intrusion and battery. Can also
decode DTMF, Two-Tone Sequential, single-tone, EAS, POCSAG Decoder and Federal
FSK Two-Way. A sensor kit is required for each controller and should be selected to
match the siren motor type / number / voltage and phase. Two-Way DTMF configuration requires ES-PROG-DTMF and should be included on the sales order. Antenna
and cable are not included and sold separately.
FCTBD
FCTBDH
Two-Way FC controller w/ High Band 136-174 MHz radio
Approximate weight: 155 lbs. 70.5kg
FCTBDU
Two-Way FC controller w/ UHF Band 403-470 MHz radio0
Approximate weight: 155 lbs. 70.5kg
FCTBD-IP
Two-Way FC controller, no radio included
Approximate weight: 155 lbs. 70.5kg
FCTBD Controller IP-Enabled
Approximate weight: 155 lbs. 70.5kg
5
5
Options for Electro-Mechanical Sirens
240VAC (Nominal) Powering Options
Federal Signal offers two options for 240VAC operation. When battery operation is required,
use of the 2001TRBP is recommended. The 2001TRBP is aluminum enclosed and includes a
48Vdc/200A contactor, and buss bars which mount in the controller cabinet. For applications
where battery operation is not required the 2001-AC can be used. The 2001-AC includes
240VAC transformer/rectifier, 200A fuse, buss bars, NEMA4 cabinet and 2 each 48Vdc/200A
contactors.
2001TRBP
240VAC (nominal) to 48VDC/120VAC Power Converter
Approximate Weight is 180 lbs., 77 kg.
2001TRBP-KIT
48VDC / 200A contactor, and buss bars
240VAC (nominal) to 48VDC/120VAC Power Converter
Approximate weight 182 lbs., 53 kg.
Note: This part number is now 2001-AC (previously 2001AC).
2001-AC
Solar Power Option
Siren batteries can be charged using solar power. Model PVS220W-48 contains solar panels
and regulators to provide correct voltage to the batteries (GEL batteries are recommended).
Solar panels are mounted on an aluminum frame which is attached to the siren pole.
Please contact Federal Signal’s Customer Care Department to verify proper sizing, based on
location, radio type, and usage. Price subject to change based on “special” configuration.
Solar plus AC charging add $750.00 for ES-SMV. Please note on the
order “Solar Only” or “Solar + AC Charging”.
PVS220W-48
48VDC 220W Solar Power Charging System
Battery Warmers
In locations where temperatures may drop below freezing for extended periods, battery
warmers are recommended to maintain battery efficiency. Note 120VAC power is required
to operate battery warmers. On-off control of the warmers is provided by a thermostat that
senses the inside temperature of the battery cabinet.
HTR4-Battery heaters
Sensor Kit for FC Controllers with two-way status monitoring
Select the sensor that matches your siren motor type and number
SK-SM
SK-3M
SK-DCM-C
SK-DCM-R
Single motor siren AC current sensor
Quantity 3 AC current sensors for 3 motors
DC current sensor - chopper motor
DC current sensor - rotator motor
Select the sensor that matches your voltage and phase
6
SK1-120
SK1-240
SK3-240
SK3-480
Single Phase, 120VAC voltage sensor
Single Phase, 240VAC voltage sensor
3-Phase, 240VAC voltage sensor
3-Phase, 480VAC voltage sensor
6
Options for Electro-Mechanical Sirens
Options for One-way and Two-way Controllers
FSPWARE includes windows custom cable and tone loader software. This is for use with
mechanical and UltraVoice non-digital boards.
FSPWARE
Windows Programming Software
Approximate weight: 3 lbs., 1.5 kg.
IP-Enabled Mechanical Sirens
Federal Signal mechanical sirens can be IP-Enabled to allow flexible and reliable control. The
following items are recommended for use with IP enabling sirens. Contact Federal Signal to
review your specific design requirements and customize a quote.
Centerpoint is the communications software which connects all components of an IP based
network. Centerpoint can also be ordered to interface to FEMA’s IPAWS network to enable
direct IPAWS and siren activation.
For the Central Command Center:
CS-CENTERPOINTSmartMsg Communications Server w/ CenterPoint Dashboard
Choose (1) Commander Software
(can utilize existing Commander SW if already purchased)
SFCD10
Up to 10 RTUs / Includes initial 1st year warranty
SFCD25
Up to 25 RTUs / Includes initial 1st year warranty
SFCD255
Up to 255 RTUs / Includes initial 1st year warranty
SFCD512
Up to 500 RTUs / Includes initial 1st year warranty
Choose (1) Hardware Server
X-PCS-17
Desktop Server with 17” Flat Panel Monitor
X-PCS-22
Desktop Server with 22” Flat Panel Monitor
X-PCS-22T
Desktop Server with 22” Flat Panel Touch Monitor
Installation Requirements
TK-S-FULOPTPKG System Optimization & Operator Training Package
CS-MS
First Year Maintenance & Support
For the Siren Site:
Include (1) per IP-Enabled Siren Site
Q-DC-IP
DC Siren Ethernet Interface
Q-FCT-IP
FCT Siren Ethernet Interface
7
7
Sample Ordering Configurations for
Electro-Mechanical Sirens
One-way without Radio
The following configurations identify the components needed when ordering.
2001 Siren with one-way controller, no radio, 240VAC Powering, no batteries.....................Configuration 1
2001-130 2001-AC
FC
Siren Head
AC Transformer / Contactor Enclosure for 2001 or 508 Sirens
Federal Controller/Timer
2001 Siren with one-way controller, no radio, battery operation............................................Configuration 2
2001-130 DCFCB
15500007A-02
Siren Head
FC Controller / Timer
Qty 4 - Battery sealed AGM 105Ah (MK Battery 8A31)
2001 Siren with one-way controller, no radio, battery operation............................................Configuration 3
2001-130
2001TRBP
DCFCB
15500007A-02
Siren Head
Nominal 240VAC to 48Vdc/120VAC Power Converter
FC Controller / Timer
Qty 4 - Battery sealed AGM 105Ah (MK Battery 8A31)
One-way with Radio
The following configurations are to identify the major components when ordering.
Activation Control Point.............................................................................................................. Configuration 4
SS2000+
BSH
Digital and DTMF Control Station, Desk Mount
Base Station High band Radio Package (order part no. BSU for UHF)
508 Siren with one-way control, radio, 240VAC Powering, no batteries............................... Configuration 5
508-128
Siren Head
2001-AC
AC Transformer / Contactor Enclosure for 2001 or 508 Sirens
FCH
RP164Antenna
AMB-RP164
High band Federal Controller/Timer (order part no. FCU for UHF)
10A3 Antenna mounting bracket for RP164
25 ft. Cable
2001 Siren with one-way control, radio, 120VAC to battery operation................................. Configuration 6
2001-130
DCFCBH
15500007A-02
8
Siren Head
High band Federal Controller/Timer (order part no. DCFCBU for UHF)
Qty 4 - Battery sealed AGM 105Ah (MK Battery 8A31)
RP164Antenna
AMB-RP164
10A3 Antenna mounting bracket for RP164
25 ft. Cable
8
Sample Ordering Configurations for
Electro-Mechanical Sirens
2001 Siren with one-way control, radio, 240VAC to Battery Operation................................ Configuration 7
2001-130Siren Head
2001TRBPNominal 240VAC to 48Vdc/120VAC Power Converter
DCFCBHHigh band Federal Controller/Timer (order part no. DCFCBU for UHF)
15500007A-02Qty 4 - Battery sealed AGM 105Ah (MK Battery 8A31)
RP164Antenna
AMB-RP164Antenna Mounting Bracket for RP164
10A3 25 ft. Cable
Two-way with Radio
The following configurations are to identify the major components when ordering.
Activation Control Point with GUI/PC and Base Radio..............................................................Configuration 8
X-PC-22 PC with 22 inch monitor
SFCD255 Federal Commander Software (250 RTU’s)
SS2000+ Digital and DTMF Control Station, Desk Mount
BSH Base Station Radio Package (see activating controls)
2001 Siren with two-way control, radio, 120VAC to battery operation.................................Configuration 9
2001-130Siren Head
DCFCTBDH Two-Way Digital Controller/Decoder/Sensors (High band)
15500007A-02 Qty 4 - Battery sealed AGM 105Ah (MK Battery 8A31)
OMNI 3dB gain Omni antenna, plus cable
See Omni antenna section for further information
2001 Siren with one-way control, radio, 240VAC to battery operation................................Configuration 10
2001-130Siren Head
DCFCTBDH Two-Way Digital Controller/Decoder/Sensors (High band)
2001TRBP Nominal 240VAC to 48Vdc/120VAC Power Converter
15500007A-02 Qty 4 - Battery sealed AGM 105Ah (MK Battery 8A31)
OMNI 3dB gain Omni antenna, plus cable
See Omni antenna section for further information
9
9
Electronic Sirens
Directional Speaker Arrays (DSA)
Directional Speaker Array, Model DSA, is a maintenance free, electronic siren
comprised of one to four vertical support structures with two to six re-entrant
speakers per vertical support. DSA speakers include wire and adjusting/mounting
bracket. Order DSAMK1 for wall mount and DSAMK4 for pole mount. The DSA
provides excellent voice reproduction, and with the aid of the UltraVoice™ controller
(sold separately), will produce the following standard warning signals: wail, pulsed
steady, steady, pulsed wail, and alternating alert, wail and Westminster chimes.
The UltraVoice™ controller can interface to radio systems, satellite, cellular or IP
networks. Power is available via AC, DC and Solar with battery back-up.
(2 DSA4’s
w/ DSAMK4
shown)
10
DSA2
Electronic Speaker array
Two re-entrant speakers, 111 dB(c) includes approx. 47’ of cable.
Approximate weight: 127 lbs., 58 kg.
DSA3
Electronic Speaker array
Three re-entrant speakers, 115 dB(c) includes approx. 48’ of cable.
Approximate weight: 130 lbs., 59 kg.
DSA4
Electronic Speaker array
Four re-entrant speakers, 117 dB(c) includes approx. 49’ of cable.
Approximate weight: 175 lbs., 80 kg.
DSA5
Electronic Speaker array
Five re-entrant speakers, 119 dB(c) includes approx. 50’ of cable.
Approximate weight: 220 lbs., 100 kg.
DSA6
Electronic Speaker array
Six re-entrant speakers, 121 dB(c) includes approx. 51’ of cable.
Approximate weight: 230 lbs., 104 kg.
DSAMK1
Wall mounting kit for one vertical stack, includes stainless steel
brackets and mounting hardware
DSAMK4
Mounting kit for one to four vertical stack(s), stainless steel
brackets and mounting hardware
Approximate weight: 20 lbs., 9 kg.
DSAMKSP Mounting kit for Steel Pole (4.5” pipe)
Bracket for one vertical stack
DSAMKSPB23
Mounting Brackets for 2.375” Steel Pole
Bracket for one vertical stack
DSAMKSPB45
Mounting Brackets for 4.5” Steel Pole
Brackets for one vertical stack
10
Electronic Sirens
Modulator Speaker Arrays
The innovative omni-directional electronic Modulator II speaker array consists
of modules that utilize four 100 watt drivers. It also provides clear voice
communication and offers warning signals which are produced by Federal
Signal’s UltraVoice™ electronic controller and amplifier system. Custom tones
and professionally recorded voice messages for the UltraVoice controller
are available and can be purchased upon request. Each siren includes
approximately 40’ pigtail of cable for wiring to the control system.
MOD3012B
MOD1004B
Electronic Speaker array One module, 106 dB(C)
Approximate weight: 125 lbs., 56 kg.
MOD2008B
Electronic Speaker array, Two modules, 112 dB(C)
Approximate weight: 190 lbs., 86 kg.
MOD3012B
Electronic Speaker array, Three modules, 115 dB(C)
Approximate weight: 255 lbs., 115 kg.
MOD4016B
Electronic Speaker array, Four modules, 118 dB(C)
Approximate weight: 320 lbs., 145 kg.
MOD5020B
Electronic Speaker array, Five modules, 120 dB(C)
Approximate weight: 385 lbs., 175 kg.
MOD6024B
Electronic Speaker array, Six modules, 121 dB(C)
Approximate weight: 450 lbs., 204 kg.
MOD8032B
Electronic Speaker array, Eight modules, 124dB(C)
Approximate weight: 580 lbs., 263 kg.
Controllers for Electronic Sirens
UltravoiceTM Electronic Controllers
1 UVTDH with 3 UV400
Federal Signal’s UltraVoice (UV) controller is designed as a flexible system to
control DSA and/or Modulator electronic sirens. The UV controller can generate
and amplify single or dual frequency warning tones and comes with seven preset warning signals. In addition, the controller has been designed specifically to
reproduce high quality live or pre-recorded-voice capability. The UV controller
includes a NEMA 4X cabinet housing, the control module, up to eight 400 watt
amplifiers (p/n UV400, ordered separately), a 120VAC to 24VDC battery charger
(p/n 120816C) and a NEMA3R battery cabinet. The control module may be
equipped with a plug-in programmable receiver module, utilizing DTMF or twotone sequential activation protocols. DTMF requires ES-PROG-DTMF. UVTD can
also be ordered with the IP or Landline option included. A digital voice option
can be added by plugging in a single mini SD card (p/n DVSD) which can store
up to 250 messages (DVR). SS2000+ or other activation control station required.
Continued on next page
11
11
Controllers for Electronic Sirens
Continued from previous page
UVTD
UV Controller, Amplifier Shelf, No Radio
Approximate weight: 125 lbs., 57 kg.
UVTDH
UV Controller, Amplifier Shelf, High band radio 136-174MHz.
Approximate weight: 128 lbs., 58 kg.
UVTDU
UV Controller, Amplifier Shelf, UHF band 403-470MHz.
Approximate weight: 140 lbs., 58 kg.
UVTD-IP
UV Controller, Amplifier Shelf with IP
UVTD-LL
UV Controller, Amplifier Shelf with Landline interface
UVTD240
UV Controller, Amplifier Shelf, 240 Volt, No Radio.
Approximate weight: 142 lbs., 57 kg.
UV400 amplifier Selection chart for DSA Speaker arrays
Model
UV400 Amplifier
Required
DSA2
DSA3
DSA4
DSA5
DSA6
1
1
1
4
2
Total Power
Watts
200
300
400
500
600
watt
watt
watt
watt
watt
Recommended
Number of
Batteries
2
2
2
2
2
UV400 amplifier Selection chart for Modulator Speaker arrays
Model
UV400 Amplifier
Required
Total Power
Watts
Recommended
Number of
Batteries
MOD1004B
MOD2008B
MOD3012B
MOD4016B
MOD5020B
MOD6024B
MOD8032B
1
2
3
4
5
6
8
400 watt
800 watt
1200 watt
1600 watt
2000 watt
2400 watt
3200 watt
2
2
2
2/4
4
4
4
UV400
UV25ST
ES-PROG-DTMF
12
400 Watt amplifier, 70VRMS
.Approximate weight: 4.12 lbs., 1.9kg each
25v Step down transformer
Two-way DTMF programming
NOTE: Designate radio frequency upon order. Standard
Radio Model is Motorola CDM750. If another radio is
required, contact ANS System Applications for the correct
ordering information.
12
Options for Electronic Sirens
Satellite/Cellular Communications Solutions
Q-UV-SATCELL1
UV Satellite and cellular upgrade kit (Verizon)
Q-UV-ISAT
UV Satellite only upgrade kit
Q-UV-CELL1
UV Cellular only upgrade kit (Verizon)
Accessories for UV Controllers/Electronic Sirens
HTR2
2-Battery heaters
HTR4
4-Battery heaters
MIC-XLR
PVS220W-24
288964A-24
DVSD
DVR
Gooseneck microphone and deskbase
Solar charging system for UV systems
Solar panels and regulator to charge batteries.
Aluminum pole mount frame included.
Solar panel wattage and brand may vary based on availability.
Solar Regulator 24VDC
Digital voice mini-SD card
For use with all new UV controllers.
Digital voice programming
.Per recording session, one voice, up to 16 messages
DVR-CU DVR-COPY DVR files copied if available
DVR-REB1
Re-burn existing chips 1-10, issue RMA for chips
FS-PL1
Tone coded and digital coded squelch decoder
PL1 is for two-tone activation formats above 400HzIf not using two-tone activation format then use FS-PL1.
FS-PL2
Tone coded and digital coded squelch decoder low
FS-PL2 is for two-tone activation formats below 400Hz
FS-SINAD
300RC
TRC1020B
Telephone relay control
.Approximate weight: 4 lbs., 2 kg.
FSPWARE
Windows Programming Software
Windows based programming software with custom cable and
tone loader software included. For all mechanical and UltraVoice
non-digital controllers. Approximate weight: 3 lbs., 1.5 kg.
UVARM 8570063A
Digital voice programming
.Multiple voices, languages or over 16 messages
Signal-to-noise & distortion ratio monitor
Telephone relay interface
UV audio and relay module
100W driver used in DSA and Modulator Sirens
13
13
Options for Electronic Sirens
IP-Enabled Electronic Sirens
Federal Signal electronic sirens can be IP-Enabled to allow flexible and reliable control. The
following items are typically used when IP enabling sirens. Contact Federal Signal for a
review of your specific design requirements and request a quote.
CenterPoint is the communications software which connects all components of an IP
based network. CenterPoint can also be ordered to interface to FEMA’s IPAWS network to
enable direct IPAWS and siren activation. See Communications and Messaging Software for
additional information.
For the Central Command Center:
CS-CENTERPOINT
Communications Server
Software license includes CenterPoint Dashboard
Choose (1) Commander Software (can utilize existing Commander
SW if already purchased)
SFCD10
Up to 10 RTUs / Includes initial 1st year warranty
SFCD25
Up to 25 RTUs / Includes initial 1st year warranty
SFCD255
Up to 255 RTUs / Includes initial 1st year warranty
SFCD512
Up to 500 RTUs / Includes initial 1st year warranty
Choose (1) Hardware Server
X-PCS-17
Desktop Server with 17” Flat Panel Monitor
X-PCS-22
Desktop Server with 22” Flat Panel Monitor
X-PCS-22T
Desktop Server with 22” Flat Panel Touch Monitor
Installation Requirements
TK-S-FULOPTPKG
System optimization & operator Package
First Year Maintenance & Support
CS-MS
For the Siren Site:
Include (1) per IP-Enabled UV / UVIC Siren Site
14
Q-UV-IP
Siren Ethernet Interface
Q-UVIC-IP
Siren Ethernet Interface
14
Electronic Siren Sample Ordering Configuration
Modulator Siren Two-way with Radio
The following configurations are to identify the major components when ordering configurations shown.
Activation Control Point with GUI/PC and Base Radio.....................................Configuration 11
X-PC-22
PC with 22 inch monitor
SFCD255
Federal Commander Software (250 RTUs)
SS2000+
Digital and DTMF Control Station, Desk Mount
BSH
AMB-W
Base Station High band Radio Package (order part no. BSU for UHF)
Antenna Mounting Bracket, Wall
400 Watt Modulator, Omni-directional electronic speaker array,
106dB(C) w/ controller and radio, 120VAC to Battery Operation...................Configuration 12
MOD1004B
UVTDH
Electronic Speaker array
UV Controller, Amplifier Shelf w/High band radio 136-174MHz.
(order part no. UVTDU for UHF)
400 Watt amplifier, 70VRMS (Qty 1)
UV400
IK-BATT-STD
OMNI
AMB-P
Battery (Qty 2)
.3dB gain Omni antenna, plus cable
.See Omni antenna section for further information
Antenna Mounting Bracket, Pole
1600 Watt Modulator, Omni-directional electronic speaker array,
118dB(C) w/ controller and radio, 120VAC to Battery Operation...................Configuration 13
MOD4016B UVTDH
.Electronic Speaker array
UV Controller, Amplifier Shelf w/High band radio 136-174MHz.
(order part no. UVTDU for UHF)
400 Watt amplifier, 70VRMS (Qty 4)
UV400
IK-BATT-STD
OMNI
AMB-P
Battery (Qty 2)
3dB gain Omni antenna, plus cable
.See Omni antenna section for further information
Antenna Mounting Bracket, Pole
3200 Watt Modulator, Omni-directional electronic speaker array,
106dB(C) w/ controller and radio, 120VAC to Battery Operation...................Configuration 14
MOD8032B
UVTDH
Electronic Speaker array
UV Controller, Amplifier Shelf w/High band radio 136-174MHz.
(order part no. UVTDU for UHF)
400 Watt amplifier, 70VRMS (Qty 8)
UV400
IK-BATT-STD
OMNI
AMB-P
Battery (Qty 4)
3dB gain Omni antenna, plus cable
.See Omni antenna section for further information
Antenna Mounting Bracket, Pole
15
15
Communications and Messaging Software
SmartMsg is an advanced suite of applications specifically developed to promote secure, reliable, costeffective communication solutions for:
• County and Municipal Citizen Alerting
• First Responder and Staff Notifications
• Interoperable Communications and Data Sharing
• Emergency and Day-to-Day Messaging
• School Lockdown Applications
• Industrial and Business Alerting
This software and web-based solution supports operational continuity through a user-friendly dashboard that
integrates a full range of communication tools. SmartMsg addresses virtually any critical communications
requirement by taking advantage of an organization’s existing communication devices and infrastructure,
and strengthening and supplementing emergency systems already in place. The end result: a comprehensive
communications solution for municipal public safety, enterprise, educational, healthcare and industrial applications.
Networking & Communication Module – Required
CenterPoint is the IP networking and communications software which allows Federal Signal Alerting and Notification
equipment to communication with each other. CenterPoint software is required when Commander is used to
communicate to IP based sirens or with Informer IP’s. SmartMsg, a messaging and application based system, also
runs on the CenterPoint networking software.
CS-CENTERPOINT
Communications Server
Software license includes CenterPoint Dashboard allows access to
application modules
Local or Hosted Server –
Required
CenterPoint can be hosted locally via customer purchased servers (minimum requirements), remotely via
Federal Signal hosted servers or via a combination of both (hybrid).
X-PCS-22
Premise based desktop server with 22” flat panel monitor
X-PCSR2
Premise based rack mount server
X-PCSR3
Premise based rack mount server with RAID and SSD
CS-H-SETUP
CS-HOST-FEE
Hosted Account Setup - Primary and / or back-up server includes hardware
necessary for hosted services. Fee is per server. Two redundant servers are
required if no server is deployed on customer premise.
Server Hosting Fees - Annual Fee for Server Hosting, Maintenance and Support.
Fee is Per-Server Reoccurring annually
Application Module
for type of system – Notify & respond / Notify only / Campus
Notify & respond – select messaging software and number of full users, receive
& acknowledge and receive only (citizen) licenses
CS-SMARTMSG
16
SmartMsg Messaging Software incls. CS-MOD-TTY
Supports up to 1,000 SmartMsg User Profiles Licensed Separately
16
Communications and Messaging Software
CS-SMARTMSG+1K
SmartMsg Messaging Software incls. CS-MOD-TTY
Supports over 1,000 SmartMsg User Profiles Licensed Separately
CS-SMCLIFULL
SmartMsg Client/Full-User Initiate / Receive and Acknowledge Profile Licenses –
typically used for administrator and any user with ability to initiate SmartMsg,
can also initiate chat session
CS-SMCLIRCP
CS-CIT-SL1
Receive Only (Citizen) License up to 50,000 Households
CS-CIT-SL2
Receive Only (Citizen) License 50,001 to 150,000 Households
CS-CIT-SL3
Receive Only (Citizen) License 150,001 to 500,000 Households
CS-CIT-SL4
Receive Only (Citizen) License 500,000+ Households
CS-CIT-PL
SmartMsg Client Receive & Acknowledge User Profile Licenses – allows user
to receive and respond to SmartMsg. Allows user to update detailed contact
information
Receive Only (Citizen) fee per household (First Year Fee)
Notify only – select alerting software based on number of households
CS-CIT-SL1
Receive Only (Citizen) License up to 50,000 Households
CS-CIT-SL2
Receive Only (Citizen) License 50,001 to 150,000 Households
CS-CIT-SL3
Receive Only (Citizen) License 150,001 to 500,000 Households
CS-CIT-SL4
Receive Only (Citizen) License 500,000+ Households
CS-CIT-PL
Receive Only (Citizen) fee per household (First Year Fee)
Campus alerting – select alerting software based on number of students/staff
CS-ED-HOST1
Campus Alerting Software up to 10,000 Profiles - students/staff
CS-ED-HOST2
Campus Alerting Software up to 30,000 Profiles - students/staff
CS-ED-HOST3
Campus Alerting Software up to 50,000 Profiles - students/staff
CS-ED-HOST4
Campus Alerting Software >50,000 Profiles - students/staff
CS-ED-RCP
Alerting fee per student/staff Recipient Only (First Year Fee)
Application Modules to allow enhanced functionality
CS-SCENMGR
CS-SCEN-CLI
CS-CSD1
CS-DISPATCH
CS-IPAWS1
CS-WEBMSG
SCENARIO MANAGER Module - Incident Planning & Execution Tool
ScenarioMgr Client Workstation License - Incident Planning & Execution Tool
(Licensed per Workstation)
CISCO SIGNAGE DISPLAY Module
DISPATCH MANAGER Console
IPAWS Module – requires FEMA certification and COG, see FEMA for further
information
WEB MSG / MOBILE MSG - Hosted Web Services for system management,
SmartMsg Initiation, creating and managing notification profiles (Landline
Phones, Cell Phones, Text Pagers & E-Mails). Includes a user profile interface for
message reception and initiation. Includes MobileMsg
17
17
Communications and Messaging Software
CS-EXPRESSMSG3
EXPRESS MESSAGE Unlimited Licenses
CS-LANG
Multi-Lingual Alerting Module
TTS-1
TTS-1000
CS-MOD-VOIP
Ivona Text to Speech Voice - Per Server (under 1,000 users)
Ivona Text to Speech Voice - Per Server (Over 1,000 users)
SmartMsg Voice-Over-IP (VoIP) Server Module interface to Local PBX
Hardware
Unique to the CenterPoint communications software is the ability to interface to various hardware devices. Sirens
for outdoor alerting, radio interface units (RIU), IP Informers for indoor alerting and sensor interface units (SIU)
allow enhanced functionality to control and activate your alerting system.
CS-RIU
Radio Interoperability Unit – interface up to 4 radios
Requires local PC with RadioLink client software (included)
NOTE: each radio requires 2 cables a universal RIU Adaptor cable per radio p/n
8647000A and cable specific to radio see below
CS-RIUPLUS
Radio Interoperability Unit with MINI PC - interface up to 4 radios
Includes rack mount PC with integral RIU and RadioLink client software
Includes mouse and keyboard
NOTE: each radio requires 2 cables a universal RIU Adaptor cable per radio p/n
8647000A and cable specific to radio see below
X-MONFS22
Flat screen monitor 22”
8647000A
RIU Standard Cable 1 required per radio, in addition requires radio interface cable below.
864700073
Motorola XTN/CP200/BPR40 Portable
864700074
Motorola HT 1000, XTS 5000 Portable
864700075
Kenwood (TK2170,TK2302V, NX-240V,NX-340U) Portable
864700076
BENDIX KING Portable
864700077
Motorola HT 1250 & Compatible Portable
864700078
Icom F11S Portable
864700080
MOTOROLA CDM 750/1550/CM200/CM300 LS/PM400 Mobile
864700081
MOTOTRBO XPR6550, APX7000 & Compatible Portable
864700082
XPR 4550,ALL XPR Mobile
864700083
Motorola MCS 2000 DB25 Rear Connector Mobile
864700084
M/ACOM M7100 Mobile
864700085
M/ACOM M7300 Mobile
864700086
Kenwood TK-480,TK-5320 Portable
864700087
MACOM P7100 SERIES, MC-1527 PRYME Portable
864700103A
Kenwood TK5810 Mobile
864700104A
Kenwood TK790 Mobile
864700105A
Motorola Astro XTL 1500, 2500, 5000,APX7500 Mobile
864700136A
Hirose Plate Assy w/ male female extension Mobile
18
18
Communications and Messaging Software
A Sensor Interface Unit (SIU) is a two-way device which allows activation of SIU outputs (relay contact closures)
based on SmartMsg controls and activation of SmartMsg templates based on inputs to the SIU. An SIU provides
up to 16 inputs and 4 relay outputs for connection of external equipment.
CS-SIU
Sensor Interface Unit (Sensor/Alarm Board)
The Informer-IP is an activation device and a receiving device for alerts. Informer-IP devices can be used in School
Lockdown applications to initiate an Alert. An Informer-IP can be used to announce severe weather alerts to
schools or businesses as part of a county-wide alerting system. An Informer-IP can also be used at industrial
plants as part of a plant wide notification system for both activation of alerts and to direct personnel.
I-IP-IO
I-IP-WIFI-IO
I-IPW
I-IP-SW
I-KEYFOB
PSEM-R
PSEMSC-R
PSEV-Y
PSEMSC-Y
LP1-012A
Amber LP1 strobe for I-IPW Wall Mount Informer-IP
LP1-012C
Clear LP1 strobe for I-IPW Wall Mount Informer-IP
Informer-IP desk and wall mount plastic enclosure. Can be powered via wall
transformer or POE.
Informer-IP WIFI model desk and wall mount plastic enclosure. Powered via
wall transformer.
Informer-IP wall or recessed mount metal enclosure. Can be powered via AC or POE.
Can be equipped with optional LP1 strobe when wall mounted. I-IPW is pre-wired for
LP1 strobe. I-IPW requires AC powering when utilizing the LP1 strobe.
Setup Wizard Software (required for all IP models)
Four button key fob for Informer-IP activation
Push Station, Emergency, Red
Push Station Red with Sounder Cover
Push Station, Emergency, Yellow
Push Station Yellow with Sounder Cover
Hosted Dialing
Federal Signal has partnered with XO Communications to provide a hosted dialing service.
CS-D-SETUP
Hosted dialing account setup – provides for primary or back-up of dialing services
CS-D-PPMIN
Hosted Dialing Pre-Paid Call-Out Minutes (Reoccurring as required)
CS-D-UEMIN
Unlimited Hosted Dialing Call-Out Minutes (Reoccurring as required)
CS-D-HOST
Subsequent Year’s Hosted Dialing Services Fee (Reoccurring annually)
19
19
Communications and Messaging Software
Non Sip 2.0 Dialing
Customer Premise dialing requires local telephony equipment capable of receiving VoIP traffic. If customer equipment does not support SIP 2.0; an Asterisk gateway solution is required. Asterisk converts VoIP to a standard T1
interface. Each T1 circuit/Asterisk requires one locally configured SmartMsg server to dedicate to processing calls
through that dialing pathway.
CS-ASTERISK-SS
VoIP/SIP 1U Rack-Mount Gateway Appliance (Single Span)
Supports single (1) Voice T1 in a Single Unit (23 Phone Lines)
CS-ASTERISK-DS
VoIP/SIP 1U Rack-Mount Gateway Appliance (Dual Span)
Supports 2 each voice T1 in a Single Unit (46 Phone Lines)
CS-ASTERISK-QS
VoIP/SIP 1U Rack-Mount Gateway Appliance (Quad Span)
Supports 4 voice T1 in a Single Unit (92 Phone Lines)
Implementation and Activation Services
CS-PRJMAN
CS-I-CS-CU
CS-PP
CS-DATA
Project Management and Training includes dedicated project manager to manage system
implementation. On-site training or web based training is also provided. Includes up to 8
hours of project management and 8 hours of training (Requires quote, may require additional units)
System Assurance & Installation – includes up to 8 hours for installation, configuring,
and testing the system (Requires quote, may require additional units)
Live Operator Message Activation
Includes up to 4 Operator Activations Requires hosted system... (Reoccurring annually)
Purchasing Citizen User Data - US Only (Reoccurring as required)
Maintenance & Support
CS-MS
CS-MS-B
CS-1PS
CS-MS-P
20
Standard Maintenance & Support “STANDARD” Support begins 90 Days after Original
Purchase Order Date
Includes Version Upgrades & Support
On-Line Web & Phone Support Provided (Monday thru Friday 9am-6pm Eastern Time)
Subsequent Year’s Annual STANDARD Maintenance & Support Period “STANDARD” Support begins 15 months after Original Purchase Order Date Includes Version Upgrades & Support, Effective After Initial Product Support Period
On-Line Web & Phone Support Provide (Monday thru Friday 9am-6pm Eastern Time)
(Reoccurring annually)
Premium Maintenance & Support
Includes Version Upgrades & Support
24x7 On-Line Web & Phone Support begins 90 Days after Original Purchase Order Date
Subsequent Year’s Annual Premium Maintenance & Support Period “Premium” Support begins 15 months after Original Purchase Order Date
Includes Version Upgrades & Support
Effective After Initial Product Support Period
24x7 On-Line Web & Phone Support Provided
(Reoccurring annually)
20
Command and Control for Sirens
Federal Commander Software Based Solution
SFCD Commander Software
The Federal Commander Digital System offers emergency managers and public
safety officials both secure activation and status monitoring of their alerting and
notification system. From siren activation to in-home alerting to sending SmartMsg
alerts to any personal device, this system is designed to provide your community
with complete alerting and notification capability. Alert Assist software (SFDC-A)
is an add-on to commander that allows notification plans to be built through GUI
button screens. SFDC-A includes a license key, requires definition, screen
configuration, development and testing.
Federal Commander Software
SFCD10
Up to 10 RTUs / Includes initial 1st year warranty
SFCD25
Up to 25 RTUs / Includes initial 1st year warranty
SFCD255
Up to 255 RTUs / Includes initial 1st year warranty
SFCD512
Up to 500 RTUs / Includes initial 1st year warranty
SFCD-A
Alert Assist Application Software
System optimization per quote based on customer
requirements. Must order TK-S-CPSYSOP-CU.
Federal Commander Number-of-Sites Upgrade
SFCDUPI
Upgrade from 10 to 25 sites
SFCDUPII
Upgrade from 25 to 255 sites
SFCDUPII
Upgrade from 255 to 512 sites
Federal Commander Extended Warranty (Includes Software Updates and Support)
SFCD-W10
Up to 10 RTUs
SFCD-W25
Up to 25 RTUs
SFCD-W255
Up to 255 RTUs
SFCD-W512
Up to 512 RTUs
FC Network Client License
SFCDCLNT
TCP/IP client Software, 5 Seats
SFCDCLNT-W
TCP/IP client Extended Warranty (one year)
Computing Equipment for Federal Commander Software
X-PC-17
Desktop PC with 17” Flat Panel Monitor
X-PC-22
Desktop PC with 22” Flat Panel Monitor
X-PCS-17
Desktop Server with 17” Flat Panel Monitor
X-PCS-22
Desktop Server with 22” Flat Panel Monitor
X-PCS-22T
Desktop Server with 22” Flat Panel Touch Monitor
Laptop
X-PCLAPW7PRO
Laser Printer
SSP-MINI-LP-B
X-UPS
1.5KVA Uninterruptible Power Supply 120v
X-USB-IO
I/O Functionality for commander
SFCD-MODEM
Modem for phone dial-out
X-USBMIC-1
USB Microphone
21
21
Command and Control for Sirens
Hardware Based Solution
SS2000+
Model SS2000+ is Federal Signal’s stand-alone control unit, it enables monitoring and
controlling over a communications network. The SS2000+ has 24 programmable function keys and includes a CDM750 radio interface cable. It also includes 20 inputs for
remote activation. The remote activation inputs can mirror the front panel push buttons or be reprogrammed to provide 20 additional activation points. Other capabilities
include: streaming .wav files from a PC for voice, music and text-to-speech; controlling
new and legacy systems using DTMF, EAS, two-tone and AFSK encoding; and programming hotkeys for quick activation functions in various scenarios. The SS2000+ offers
these capabilities in a simple, easy-to-use package for your desktop or 19” rack.
SS2000+
SS2000+R
SE3000
SE3000-W
SE3000CLNT
SE3000CLNT-W
X-USB-IO SE3000-VUP
Digital and DTMF controller, desk mount
Approximate weight: 6 lbs., 3kg.
Digital and DTMF controller, 19” rack mount
Approximate weight: 8lbs., 4kg.
One-way Software Encoder
Software w/ 60 programmable functions keys used with
SS2000+/R or Modem-MSK
Software Warranty
Client Software-5 Seats
Client Software-Warranty
IO option for SE3000 Software
Software version upgrades
Software must be up to date under warranty
Options for SS2000+
SSP-MINI-LP-B
MIC-XLR
BSH
BSU
MODEM-MSK
TB-LL
Laser Printer
Gooseneck microphone and desk base
Base Station radio, Power Supply, and microphone
Motorola CDM750-VHF (148-174 MHz), 25-40 watt, Pigtail,
70 ft. Cable, Lightning Arrestor
Base Station radio, Power Supply, and microphone
Motorola CDM750-UHF (450-470 MHz), 25-40 watt, Pigtail,
70 ft. Cable, Lightning Arrestor
Digital (MSK) Modem
PC to radio interface unit for digital communication over
analog channel, includes CDM750 radio interface cable.
Landline telco Base
Radio and Control Information
Radio frequency must be specified on the purchase order.
Radio installations in areas of low RF signal strength may require antennas of higher gain.
22
The FS-PL (Private Line) option is a solid state tunable device that encodes and decodes CTCSS
signals. The FS-PL option works with both tone and digital private line. This device is switch
programmable for tone and digital PL codes. This optional squelch decoder is an added security
for false activations caused by radio “skip” conditions. The tone or digital codes must be
specified. Tone frequencies for Two-Tone Sequential systems must be between 300 and 3000
Hz. Tone frequencies must be 5% apart. Tone frequencies and timings must be specified at time
of order. Base Radio and Antenna Systems are not included in siren controllers and are required
for a complete system.
22
Indoor/Outdoor Solutions
Assembly Area Solution
Federal Signal is a market leader in development and deployment of industrial
assembly area products. Assembly areas require coordination with alerting and
notification systems. Often, these assembly areas are remotely located with limited
accessibility to communications and utility power. Federal Signal has developed a robust
“assembly area notification solution” which incorporates control, activation and
monitoring with the option of solar power if required. With our Federal Signal Command Assist software platform, radio communications, solar powering and select
high performance strobes and speakers we will be able to design a system specific to
your requirements. The Federal Signal - Command Assist provides a custom built / configured / easy to use activation point for users to activate emergency procedures. Below
are typical system components, systems can be voice or non-voice, single or multiple
strobes or LED systems, local speaker systems, IP communications, solar or AC powered.
Below are common components used in assembly area applications. Contact your local
sales representative to assist you with this critical part of your Alerting and
Notification system.
Control System
SFCD-A
Alert Assist Application Software
System optimization per quote based on customer
requirements. Must order TK-S-CPSYSOP-CU
SFCD255
Up to 255 RTUs / Includes initial 1st year warranty
Assembly Area Local Controller
UVTDU
Two-Way UV Controller (Voice) w/UHF band 403-470 MHz radio
Approximate weight: 140 lbs., 58 kg
FCTBDU
Two-Way FC controller (Non-voice) w/ UHF Band 403-470 MHz radio
Approximate weight: 155 lbs., 70.5 kg
Strobes
225XL-024R
Red hazardous location flashing signal light utilizing super bright
LED array. UL Listed for Class 1, Div 2.
225XL-024G
Green hazardous location flashing signal light utilizing super bright
LED array. UL Listed for Class 1, Div 2.
Speakers
AM300
15 W Public address speaker, indoor / outdoor
AM302
30 W Public address speaker, indoor / outdoor
Solar Power
PVS220W-2424V SOLAR POWER OPTION, UV
PVS220W-48 48V SOLAR POWER OPTION, FC
23
23
Indoor Solutions
Ultravoice® UVIC and UVRI Controllers
The UltraVoice Indoor Controller (UVIC) is a remote terminal unit (RTU) specifically engineered
for indoor mass notification. The micro-processor based system with amplifiers enables
tones and voice (live or recorded) to distributed speakers, or to existing public addresses (PA)
systems. A digital voice option can be added by plugging in a single mini SD card which can
store up to 250 messages with up to 17 hours of audio.
The UVIC cabinet houses the control module, up to two UV400’s 400 watt amplifiers, and
includes two VRLA-AGM batteries, charger (120816C-01), for backup and a MNC-MC noise
cancelling microphone. Does not include DVR, amplifiers or antennas.
The UVIC as a two-way digital communication system can be ordered radio equipped for
wireless communication, IP-Enabled or via landline, allowing the unit to communicate status
to a central point via the Federal Commander Digital System.
UVICH
UVIC UVIC240
UV Indoor Electronic controller, no radio
.120 Volt, Approximate weight: 166 lbs.
UV Indoor Electronic controller, no radio
.240 Volt, Approximate weight: 176 lbs.
UVICH UV Indoor Electronic controller, High band
.120 Volt, Approximate weight: 166 lbs.
UVICU UV Indoor Electronic controller, UHF band
.120 Volt, Approximate weight: 166 lbs.
UVIC-IP
IP-Enabled UVIC
UVIC-LL
Landline UVIC
The Federal Signal UltraVoice® Remote Interface (UVRI) unit is a remote terminal unit (RTU),
specifically designed to provide remote control and status monitoring of fire alarm panels,
mass notification panels, or public address systems. The UVRI establishes a communication
link between a remote facility and its mass notification system into our Federal Commander
Digital Control System, creating a fully integrated indoor and outdoor Mass Notification System.
The UVRI also offers the unique capability for a remote operator to record and broadcast
urgent message notifications. When local control and activations are required the UVRI
provides an easy to use local user interface with local push-button control for seven control
functions and a local microphone input for live voice announcements.
UVRI
The UVRI is housed in a non-metallic indoor/outdoor NEMA 4X/UL50 rated enclosure.
The UVIC as a two-way digital communication system can be ordered radio equipped for
wireless communication, IP-Enabled or via landline, allowing the unit to communicate status
to a central point via the Federal Commander Digital System.
UVRI
UVRIH Ultravoice indoor remote interface, high Band
UVRIU
Ultravoice indoor remote interface, UHF
24
Ultravoice indoor remote interface, no radio
UVRI-IP
Ultravoice indoor remote interface, IP-Enabled
UVRI-LL
Ultravoice indoor remote interface, Landline
24
Indoor Solutions
Options for the Ultravoice ICTM
UVLOC
UVARM UV400
UVIC25ST
UVLOC
UVLOC-IM
DVSD
UltraVoice audio relay module
600 Ohm Audio Output, 33 Ohm Audio Output
600 Ohm line level, (4) programmable relays
400 Watt amplifier, 70vrms (for 25vrms use w/ UVIC25ST)
.Must order UV400 (s) with UVIC models.
25v Step down transformer (70vrms to 25vrms)
UltraVoice local operating console
.Requires
UVLOC Interface Module 1 per UV Controller
Digital Voice, Mini SD Card
SelecTone® Amplified Speakers
302GC
Federal Signal’s Model SelecTone® Speaker Amplifier is designed to produce crisp,
clear tones, digital voice messages and live public address in harsh environments with
high ambient noise levels. The rugged speaker cone and projector are constructed of
spun aluminum. The internal circuitry, tone module, and gain control are contained
in a housing constructed of die cast aluminum. All surfaces are sealed with powder
coat paint. Dust and moisture-proof gaskets provide protection from the elements.
The 300/2GC is UL Listed for indoor and outdoor use. It has been designed, tested
and approved for use in Type 3R applications. All speakers have built in gain control.
Internal gain control allows output adjustment from 0dBa to a maximum of 110dBa
at 10 feet.
50GC-024BG
Wall mount Selectone Speaker 24Vac/dc 64-88dB @ 10 ft.
50GC-120BG
Wall mount Selectone Speaker 120vac 5.5” 64-88dB @ 10 ft.
300GC-024
Selectone Signal 24vac/dc Speaker 15 Watt 110dB @ 10 ft.
300GC-120
Selectone Signal 120vac Speaker 15 Watt 110dB @ 10 ft.
300GC-240
Selectone Signal 240vac Speaker 15 Watt 110dB @ 10 ft.
302GC-024
Selectone Signal 24vac/dc Speaker 30 Watt 114dB @ 10 ft.
302GC-120
Selectone Signal 120vac Speaker 30 Watt 114dB @ 10 ft.
302GC-240
Selectone Signal 240vac Speaker 30 Watt 114dB @ 10 ft.
T-300CK
Connector Kit, 1 per speaker required.
25
25
Indoor Solutions
Non-Amplified Speakers
AM50-25B
AM300
15-Watt Re-Entrant Speaker
Wall mounting, transformer coupled (25/70 VRMs) / 110dB @ 10 ft.
AM302
30-Watt Speaker
Wall mounting / transformer coupled (25/70 VRMs) / 114dB @ 10 ft.
AM50-25B
2-Watt Re-Entrant Speaker
Wall mounting, transformer coupled (25/70 VRMs) / 87dB @ 10 ft.
FWS-CELL10BDT
Bi-directional Sound Projector
10 Watt bi-directional speaker. Tappable to 2.5, 5, 10, & 20 watt.
FWS-LIS8+T72
FWS-PH10T
FWS-RCS6XT72
FWS-CELL10BDT
Lay in speaker tile for 2’x2’ or 2’x4’ drop ceiling
Transformer taps of .25, .5, 1, 2, 4, & 8 watt / 86dB @ 10 ft.
Paging horns 10 Watt speaker / Indoor / Outdoor
Transformer taps of 1.25, 2.5, 5, & 10 watt / 92dB @ 10 ft.
6 1/2” round ceiling Speaker
Transformer taps of .5, 1, 2, 4, & 8 watt. (25/70 VRMs) /
82dB @ 10 ft.
Speakers and Strobes
EN-WSTPA
Emergency Notification Wall Strobe, Plain Amber
No horn/speaker, just strobe
EN-WSTPC
Emergency Notification, Wall Strobe, Plain, Clear Lens
EN-WSTAA
Emergency Notification, Wall Strobe, Alert, Amber Lens
EN-WSTAC
Emergency Notification, Wall Strobe, Alert, Clear Lens
EN-CSTA
26
EN-CWSP Emergency Notification Ceiling Strobe, Amber
No horn/speaker, just strobe
Emergency Notification Ceiling or Wall Speaker
EN-WSSPA
Emergency Notification, Wall
Speaker/Strobe, Plain Amber
EN-WSSAA
Emergency Notification, Wall
Speaker/Strobe, Alert, Amber
EN-SM Emergency Notification Synchronized Module
EN-SMBS Emergency Notification, Surface Mounting Box, Square
EN-SMBR
Emergency Notification, Round Surface Mounting Box
26
Indoor Solutions
InformerTM Tone Alert Receiver
The Informer I-HIO and I-UIO include a commercial
grade radio receiver available in VHF and UHF bands.
The standard product will decode DTMF, single-tone,
and two-tone sequential, and optionally, EAS/SAME or
Federal Signal Digital protocols. The INFORMER is capable
of generating four separate alarm sounds that can be
followed by a live voice message. The INFORMER also has
a clearly marked LED panel which will flash to indicate an
emergency alert has been received. Other features include
a low battery indicator, 600 Ohm audio output, a dual
(N.C./N.O.) relay for external control, built-in diagnostics,
and a test indicator LED. The INFORMER includes a UL
INFORMER™ I-HIOW
Listed wall transformer and battery back-up system that
will provide more than 1.5 hours of full monitoring or multiple hours in standby. Designed
to be an attractive and durable product, the INFORMER is wall-mountable and comes with a
one-year warranty (see owner’s manual).
INFORMER™
I-HIO
Desk / wall mount receiver, 150-174 MHz VHF Band
I-UIO
Desk / wall mount receiver, 450-470 MHz UHF Band
The Informer I-HIOW and I-UIOW are identical to the I-HIO/UIO models with the exception
that this model comes in a sturdy wall mount metal enclosure with all internal wiring. An
optional LP1 strobe can be mounted on top of the unit. An AC transformer is included with
internal mounting and wiring. The unit may also be recessed wall mounted. Battery back-up
is not included with these units.
I-HIOW
Wall mount receiver, 150-174 MHz VHF Band
I-UIOW
Wall mount receiver, 450-470 MHz UHF Band
Options for the Informer Tone Alert Radio
I-EAS
I-EAS-KIT
I-FSK
I-FSK-KIT
EAS Installed, EAS/SAME Protocol Plug-in board
EAS Kit, EAS/SAME Protocol Plug-in board Field Installable
FSK Factory Installed, Federal Signal Digital Plug-in board
FSK Kit, Federal Signal Digital Plug-in board Field Installable
I-PROG1
Per Unit Programming, For 10 or Less Units
I-PROG11
Per Unit Programming, For 11-25 Less Units
I-PROG25
Per Unit Programming, For 25 or More Units
I-SW
LP1-012*
Informer Programming Software
Low profile mini strobe for wall mount unit. *Choose Color:
A-Amber, B-Blue, C-Clear, G-Green, R-Red
LP1
27
27
Indoor Solutions
Informer-IPTM
The Informer-IP is a networked alerting device which allows
indoor notification. In addition, the Informer-IP has twoway operation to allow immediate alerts to be activated
from the unit to emergency management personnel. This
model has an audio output for connecting to existing
PA systems, two relay outputs to control strobes or
other devices and an RS232 port for driving a scrolling
message display. It also provides the same tone and voice
alerts available with Federal Signal UltraVoice outdoor
siren controllers for seamless indoor and outdoor mass
INFORMER™ IP/WIFI
INFORMER I-IP-IOW
notification. The Informer-IP can be wall or desk mounted.
Power requirement is AC or PoE (Power over Ethernet)
from your network. The WIFI model allows a wireless connection to your network. Using an existing
network infrastructure lowers installation costs and simplifies wide-scale deployments. TK System
Optimization is recommended for Informer-IP Installations.
I-IP-IOInformer-IP
I-IP-WIFI-IO
I-IP-SW
Informer-IP WIFI model
Setup Wizard Software (required for all IP models)
The Informer-IP wall model, I-P-IOW, offers all of the same features as the Informer-IP with the
exception that this model comes in a sturdy wall mount metal enclosure. An optional LP1 strobe can
be mounted on top of the unit. All wiring is internal to the unit. A 120VAC transformer is included
with internal mounting and internal wiring via terminal block. The unit may also be recessed wall
mounted.
I-IPW
Wall mount INFORMER-IP
Options for all Informer-IP Models
LP1
I-KEYFOB PSEM-R
PSEMSC-R
PSEV-Y
PSEVSC-Y
LP1-012*
Four button key fob activation
Push Station, Emergency, Red
Push Station with Sounder cover
Push Station, Evacuation, Yellow
Push Station with Sounder cover
Low profile mini strobe for wall mount unit. Choose Color: A-Amber,
B-Blue, C-Clear, G-Green, R-Red
Software Requirements
(Commander V11.0 or greater)
CS-CENTERPOINT SmartMsg communications dashboard
CS-MS One Year of Support and Maintenance
(Must be included with I-IP models)
28
28
Indoor Solutions
Antennas and Cables
For One-Way Activation:
10A3
25 foot coaxial cable with PL259 connectors
10A6
Antenna whip, High or UHF band
(requires external ground plane)
RP164
Antenna Includes ground plane, VHF-High or UHF band
AMB-RP164
Antenna mounting bracket for use with RP164 antenna
For Two-Way Activation: all antennas include 35 ft. of LMR cable and are terminated with
Type N male connectors. YAGI antennas are 6dB gain directional antenna, OMNI are 3dB gain
collinear antenna.
YAGI1
YAGI2
YAGI10
YAGI13
OMNI-1 OMNI-2 OMNI-3 OMNI-4 OMNI-5 OMNI-6 OMNI-7 136-150 MHz; VHF Band
150-174 MHz; VHF Band
450-470 MHz; UHF Band
806-896 MHz; 800/900 Band
140-144 MHz; VHF Band
144-148 MHz; VHF Band
148-152 MHz; VHF Band
152-156 MHz; VHF Band
156-162 MHz; VHF Band
162-168 MHz; VHF Band
168-174 MHz; VHF Band
OMNI-9
OMNI-10
OMNI-11
OMNI-13
OMNI-15
OMNI-16
OMNI-18
OMNI-21 OMNI-22
OMNI-25
AMB-P
Antenna mounting bracket, pole mount
AMB-W
Antenna mounting bracket, wall mount
Strobes
380-390 MHz; VHF Band
406-416 MHz; UHF Band
410-420 MHz; UHF Band
430-440 MHz; UHF Band
450-460 MHz; UHF Band
460-470 MHz; UHF Band
480-490 MHz, UHF Band
806-866 MHz; UHF Band
824-896 MHz; UHF Band
896-940 MHz; UHF Band
and Accessories
LP31-012-0482
Streamline Low Profile Strobe
Choose mounting style: S for surface mount,
P for pipe mount, T for T mount
2
Choose color: A-Amber, B-Blue, C-Clear, G-Green, R-Red
Operating voltage: 12-48VDC
1
LP3P
FB2PST-012-0241
Fireball 2 Strobe light ½” NPT Pipe or surface
Choose color: A-Amber, B-Blue, C-Clear, G-Green, R-Red
Operating Voltages: 12-24VDC
1
FB24STHI-024C
Fireball Strobe light
(Hearing Impaired) Clear
FB24STHI
29
29
Accessories and Miscellaneous Parts
Batteries
DC/DCFCT/UltraVoice UV Series
IK-BATT-STD
Standard battery (FVP DC24-6)
IK-BATT-EXT
Extended battery
15500007A
Battery sealed AGM 79Ah (MK Battery 8A24)
15500007A-01
Battery sealed AGM 92Ah (MK Battery 8A27)
15500007A-02 Battery sealed AGM 105Ah (MK Battery 8A31)
15500007A-03 Battery sealed GEL 73Ah (MK Battery 8G24)
15500007A-04 Battery sealed GEL 88Ah (MK Battery 8G27)
15500007A-05 Battery sealed GEL 97Ah (MK Battery 8G31)
UltraVoice Indoor UVIC Series
155197A
Battery: MK Battery ES-50-12 or Engineered Power
Systems H2B12-44
FCT Series
155193A
Battery: Power Sonic PS-12120L or equivalent
Informer Series
155191A
Battery: ENERSYS NP1.2-6 or equivalent
Miscellaneous
Products and Services
30
ES-RADIONon-standard
ES-DOC Documentation fee municipal market-Per Site
TK-S-PROJMGMT
Project management per site/activation point
ES-FREIGHT
Shipping fees
ES-SMV
170322A-SS
Stainless 304 Control Cabinet
170329A-SS
Stainless 304 Battery Cabinet
120833A
Standard Model variation charge
Power Transformer Toroid for 240VAC systems
30
Limited Warranty
Alerting and Notification Systems, Federal Signal Corporation (Federal) warrants each new
product to be free from defects in material and workmanship, under normal use and service,
for a period of two years on parts replacement and factory-performed labor (one year for
Informer, EAS, and Federal software products) from the date of delivery to the first userpurchaser. Federal Warning Systems warrants every 508, 2001 & Eclipse Siren (Top of pole
only) to be free from defects in material, per our standard warranty, under normal use and
service for a period of five years on parts replacement.
During this warranty period, the obligation of Federal is limited to repairing or replacing,
as Federal may elect, any part or parts of such product which after examination by Federal
discloses to be defective in material and/or workmanship.
Federal will provide warranty for any unit which is delivered, transported prepaid, to the
Federal factory or designated authorized warranty service center for examination and such
examination reveals a defect in material and/or workmanship.
This warranty does not cover travel expenses, the cost of specialized equipment for gaining
access to the product, or labor changes for removal and re-installation of the product. The
Federal Signal Corporation warranty shall not apply to components or accessories that have
a separate warranty by the original manufacturer, such as, but not limited to, radios and
batteries.
Federal will provide on-site warranty service during the first 60-days after the completion of the
installation, when Federal has provided a turn-key installation including optimization and/or
commissioning services.
This warranty does not extend to any unit which has been subjected to abuse, misuse,
improper installation or which has been inadequately maintained, nor to units which have
problems related to service or modification at any facility other than Federal factory or
authorized warranty service centers. Moreover, Federal shall have no liability with respect to
defects arising in Products through any cause other than ordinary use (such as, for example,
accident, fire, lightning, water damage, or other remaining acts of God).
LOSS OF PROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY
SUCH DEFECT IN MATERIAL WORKMANSHIP.
2645 Federal Signal Drive, University Park, IL 60484
Phone: 800.548.7229 alertnotification.com
31
31
FEDERAL SIGNAL
Safety and Security Systems
Protecting people and our planet
2645 Federal Signal Drive, University Park, IL 60484
Phone: 800.548.7229 alertnotification.com
All products indicated are trademarks of Federal Signal Corporation.
©2014 Federal Signal Corporation. All rights reserved worldwide. ANS500/0714
32