Tane Catalog 2006.qxd
8/3/06
8:50 AM
Page 2
Industrial and Automotive Proximity Contacts Since 1979
1984 saw the birth of the Alarm Contact Division of Tane Services Inc. known now as Tane Alarm
products. Tane uses the finest deactivated RHODIUM reeds made today to ensure long life and no
sticking. (See explanation below on rhodium plated reeds). Our contacts have been tested to go over
400,000,000 cycles; more important, they are able to sit still for years in an unused door and
operate that one critical time. Feel free to pick on our thirty plus years of reed engineering experience.
The Best Guarantee Since 1984: $50-1
What the above means is that we guarantee NO STICKING and NO FALSE ALARMS. If during the normal
use of TANE (TAP) contacts, you have a false alarm, we will replace the defective switch with $50 in credit
upon return of the defective switch. (If contact fails at installation we will replace it with $20
in credit, after-installation $50). This warranty is good for the life of the installation, but does not cover
sticking due to high voltage surges or lightning. (For such a rare occurance TANE will replace that contact
two for one.) The reason for such a strong warranty is due to the continued testing of our reeds in
both independent labs as well as in the field. Our reeds have been rated to over 400 million operations
without sticking and have been used in Electronics, Military and Automotive since 1979. Please call us for a
detailed brochure on either our reed switches or test reports. UL BP-4702.
*Outside of U.S.A. warranty is $20-1.
UL, CUL, CE
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
Finally, a Brief Technical Explanation on Rhodium Reed Contacts:
Gold and Rhodium plating treatments can fail for many reasons most of which can be prevented with tight
quality control. However, the formation of Polymers on these surfaces will occur in the field due to the
presence of organic traces and oxygen on the switch.
Tane uses reeds that use a unique oxygen treatment stabilizing the rhodium surface and removing all
organic impurities. The result is an excellent switch with long life, not prone to the sticking or poor
contact problems prevalent in our industry. Patent #3857175 UL# E70063
Thus Tane makes this guarantee………$50-1!
TANE’s high quality is assured because of the
use of de-activated Rhodium Plated reed
switches which are Polymer free and non-stick.
"We Contact The World" ®
906 Jericho Turnpike
New Hyde Park, NY 11040
800-852-5050 / 516-328-3351
Fax: 516-326-9125
www.tanealarm.com
E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:50 AM
Page 3
STYLE
SIZE
FEATURES
3/8″ Recess
3/8″ x 3/4″
3/8″ x 1 1/4″
3/8″ x .54″
3 Sizes Available
Bare Magnet Option
Tight Fit Magnet Option
6
7
7
3/8″ Recess
3/8″ Mini Recess
3/8″ x 3/4″
3/8″ x 9/16″
Thin Magnet
Tight Fit Magnet
8
8
Stubby Press Fit
3/4″ Steel Door
1/2″ Diameter
1/2″ x 3/4″
3/4″ x .8
1/2″ x 3/4″
Terminal Option
Shorter Magnet
Contact & Magnet
9
3/4″ Stubby
Reed Button Ball
3/4″ x 3/4″
18″ Leads
Free Spacer
Easy Terminal Option
10
3/4″ Reed Rollerball
3/4″ x 1 5/8″
Reed Button
3/4″ x 1 1/3″
Free Spacer
18″ Leads or
Easy Terminal Connect
11
3/8″ Adjustable
Reed Button
3/8″ x 1″
18″ Leads
Adjustable Head
11
1/4″ Recess
1/4″ x 1″
1/4″ x .54″
1/4″ x 1″ Flange
Short Magnet Option
12
Ultra Thin
.60″ x .24″
Ultra Thin
13
Flange Mount
Self Stick
1.33″ x .3″ x .53″
1″ Gap
Vent Mag Available
Side Lead Option
14
Surface Quick
Connect
2″ x 3/8″ x 1/4″
Surface Quick
Connect
1 7/8″ x 1/2″ x 3/8″
STB-10
PAGE
STB-10/MINI-10 DM
SD-70/80
Tane 22 & 22TC
Special Plastic Resists Dirt
18″ Leads with Spacer
10
RB 32
PB52 & PB52TC
Tane 3/8 ASH
TAP-15
Mini-Disc
FM-106
Tane 60
Tane 50
800-852-5050
E-MAIL: info@tanealarm.com
"We Contact The World" ®
1″ Gap
Easy Mount Terminals
Strong Adhesive
Thin Design
1″ Gap
Quick Connect Terminals
Strong Adhesive
15
15
516-328-3351
FAX: 516-326-9125
3•TANE
Tane Catalog 2006.qxd
8/3/06
SM-35
8:51 AM
Page 4
STYLE
SIZE
FEATURES
PAGE
Standard Surface
Mount
2 1/2″ X 1/2″ X 1/2″
Free Spacers, Screws, Cover
Std Gap 7/8″
Wide Gap Option
Surface Mount
2 ″ X 1/2″ X 3/8″
Hidden Screw & Wires
1″ Gap
Contact and Magnet
Miniature Type
Mini Surface Mount
1.4″ X .31″ x .31″
1 1/16″ X 3/16″ X 1/4″
1/2″ X 1/4″
SuperStick
Wide Gap Option
Ideal for Tight Fit Windows
17
Overhead Garage Door
(Standard Industry Size)
*Pin and Glued Cable*
10 Way Bracket
18″ or 36″ Cable
18
Mounting on Door Tracks
18
15
16
GP-23
Tane 40/45
MET-44
Overhead Track Mount
Tane-66
Wide Gap Commercial
4 1/8″ X 5/8″ X 5/8″
Gap 2 1/2″
19
Mini Sizes
2″ Ht X 3″ Wide
Great Price
Small Size
Very Bright
20
B Connector
Standard Size
Dry or Gell
Brass & Beryllium Copper
Plated with Bright Nickel
20
Five Styles
Self Contained Style
Stand Alone Style
Stainless Steel Dual Tamper
Flush Mount Dual Tone Indoor
30 Watt Horn Siren
21
21
21
22
22
SPK-202
SCH-101
SPK-508
SPK-5FL
Four Styles
Self Contained Speaker
Flush Mount Speaker
30 Watt Speaker/Horn
Stand Alone Speaker/Horn
22
23
23
23
Connectors
Twelve Types
BNC Connectors and
Adaptors
24
5 Die, Stripper and Cutter
TN-Crimp Tool Kit
24
SM-20
Strobe
B Connectors
SCS-101
SIR-202
BOX-WSPR66A
SIR-5FL
SIR-508
Sirens
Speakers
BNC Connectors
Crimp Tool Kit
Coax Crimp Tool
with Accessories
Coax Crimp Tool Kit
800-852-5050
E-MAIL: info@tanealarm.com
4•TANE
"We Contact The World" ®
516-328-3351
FAX: 516-326-9125
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 5
STYLE
SIZE
PIR-360A
NEW
t
Produc
IR-2026
IR-2026Q
IR-25120
NEWts
Produc
SD-1, SD-2
SD-3, SD-4
NEW
t
Produc
FEATURES
PAGE
Ceiling Mount 360°
25
Passive Infrared Detector
Quad Style Infrared Detector
Digital Pet Immune
26
PIR 360A
PIR’s
Three Styles
Four Styles
Single and Three Zone Analuzers
Flush & Surface Mount Shock Sensors
27
Two Styles
Cable &Wire Raceway for
Low Voltage Applications
27
RJ 31 Block
and Cord
Standard Size
Complete with 18″ Cord
28
Ground Clamp
Standard Size
Easy to Use
Copper with SS Bolts
28
Push Pull
Disconnect
1″ Each Side
Shock Sensors
Cable &Wire
Raceway
E-Z DUC-IT Raceway
NEW
t
Produc
Telephone Block
Ground Clamp
PPD 11
Accessories
White, Brown, Gray
Corrosive Resistant
Tension Relieve Hole
28
Electrical Tape, Tie Wraps
28
Accessories
Various Bits
Many Sizes
3 Sharpened Spade Bits
Bell Hanger Bits
Long Flexible Bits
29
Jambstick
Standard Size
Won’t Harm Drill Bit
29
Water Sensor
Accessories
21/2″ X 1/2″ X 1/2″
Standard Size
Water Sensor with Leads
Magnets, Reeds, Plugs, Relays
30
Tane Plug-in
Transformers
Standard Size
12V, 16.5V, 24V
31
Tane Upscale Multi-Fuction
Utility Tool with Free Pouch
Multi-Function Utility Tool
31
Tane Safety Flash
Tane Safety Flare
Battery Operated Safety Flash
Battery Operated Safety Flare
31
Paddle Bits
Jambstick
Tane WS-1
Tane Transformers
Tane Utility Tool
TANE Safety Flash
800-852-5050
E-MAIL: info@tanealarm.com
"We Contact The World" ®
516-328-3351
FAX: 516-326-9125
5•TANE
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 6
RECESSED CONTACTS
STB - 10 •
3/8″
x 3/4″ Stubby Type
• The “Stubby” recess is ideal for
those who do not need to spend
extra money on the Mini Recess.
Mini Mag available for tight fits.
ORDERING INFORMATION
For Tight Fit Windows
Closed Loop
.7″ Gap
STB-10
ny
Need A
s?
Beanie
Closed Loop
1/2″ Gap
Closed Loop
1 1/4″ Gap
Open Loop
1/2″ Gap
For Bare
Magnets
Extra
Mag
STB-10 W
MINI - 10 Mag
STB-10 WG
B 3/8″ x 3/4″
STB-11
Specify
Size
STB-10 Mag
Crush Resistant and Sensitive
Solder points
Tane uses a sensitive long leaded - no stick Rhodium reed to attract the
magnetic field. This is protected by a crush resistant plastic housing.
Crush resistant button
QUICK TERMINAL CONNECTORS
3/8″
STB - 3/8 TC •
Recessed Terminal Quick Connect
Size: 3/8″ Diameter x .98″ Length
Gap: 5/8″ to 1″
• For Fast and Easy Installation
— No more soldering or splicing needed
— No need to push beanies behind walls
through small holes
Shorter magnets .57L sent as a standard
ø9
.9 .25
37
″
ORDERING INFORMATION
Closed Loop
5/8″ Gap
Closed Loop
1″ Gap
STB - 3/8 TC
(comes with 3/8″ x 9/16″
standard magnet)
STB - 3/8 TC
(comes with bare
3/8″ x 3/4″ magnet)
(Above available with smaller or bare thin magnets for applications in
tight fitting window frames)
ø1
0. 0.9
43
″
.25
8″
0.9
Insert
Wires
Here
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
6• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 7
RECESSED CONTACTS
3/8″ Diameter
TAP - 10 •
Contact and Magnet
Try Ou
r Bean
ies
Gap: 3/4″ - 11/2″
Size: 3/8″ Diameter x 1 1/4″ Length
#22 AWG, 18″ standard leads (long leads available)
ORDERING INFORMATION
For 3/8″ Flange
Closed Loop
3/4″ Gap
Closed Loop
1″ Gap
Open Loop
3/4″ Gap
S.P.D.T.
Closed Loop
1 1/2″ Gap
Closed Loop
3/4″ Gap
Open Loop
3/4″ Gap
TAP - 10
Incher
Tap-10
TAP - 11 B
TAP - 12 C
TAP - 10 WG
(w/Bare 3/8″ x 3/4″
Magnet)
TAP - 10 FM
TAP - 11 BFM
Available in Brown or White
Add “R” for Resistor + Value
*Available with a Bare Magnet of any size*
MINI - 10 •
3/8″Mini-Recess Types
( A True Miniature Size)
Size: 3/8″ x 5/8″ Mini - 10
Gap: 1/2″ to 1″
22 AWG, 18″ Length Min.
ORDERING INFORMATION
Size
Closed Loop
1/2″ Gap
Closed Loop
3/4″ Gap
Closed Loop
1″ Gap
Mini- 3/8″
Mini-10
Mini - 10 w/
STB - 10 Mag
Mini - 10 WG
• Ideal for tight fit windows
• Good for thin door frames
• Excellent for security screens
• Long leads available
• Shorter than all stubby contacts
• Versatile
• White or Brown
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
7• TANE
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 8
ULTIMATE TIGHT FIT
STB- 10 DM • Recess Contact with Thin 1/8″ Magnet
Gap: 1/2″
Contact: 3/8″ x 3/4″
Magnet: 3/8″ x 1/8″
• Ideal for tight fitting window frames where
you can not drill a hole for magnet
• Convex hole fits flat head screws flush !
For very wide gap:
Use Bare 3/8″ x 3/4″ Wide Gap Magnet
Part Number STB - 10 WG
Gap: 1 1/4″
MINI - 10 DM • Mini Recess with 1/8″ Tight Fit Magnet
Gap: 3/8″
Contact: 3/8″ x 5/8″ Mini
Magnet: 3/8″ x 1/8″
• The Mini -10 DM is ideal where not only the magnet is tight
for space, but also where the contact must be smaller
• Tane’s 3/8″ x 1/8″ powerful magnet has a convex hole drilled
so a flat head screw fits flush !
For very wide gap:
Use Bare 3/8″ x 3/4″ Magnet
Part Number MINI - 10 WG
Gap: 1″
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
" We
8• TANE
Cont
act
Wo r
The
ld"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 9
RECESSED CONTACTS
Stubby Press Fit Contact
Size: 1/ 2″ x 3/4″ GAP: .75″
• 1/2" Diameter meets needs where 3/4" is
too wide and 3/8" hole is too small.
• Available w bare or encapsulated mags
• 18" 22AWG wire standard, longer available
TANE-05
Ordering information
TANE-05 DM
Closed Loop Bare 1/4" X .79" mag
.75 Gap :
TANE-05
Open Loop Bare 1/4" X .79" mag
.70" Gap:
TANE-06
Closed Loop Ultra Thin Donut Mag
.50 Gap:
TANE-05DM
Open Loop Ultra Thin Donunt Mag
.50 Gap:
TANE-06DM
Specify WH for White or BR for Brown
3/4″
and 1″ Diameter Contact and Magnet (Steel Door) SD-70 /SD80
New Stubby Style with 1 1/ 2″ Gap
• Rugged one piece construction
• Long leads bent to keep solder off the
glass of the reed
• For standard and tighter
• Two Solder points on 22 AWG 7
fitting applications
stranded UL Wire
• Sensitive “No stick” UL rhodium reed
• Thick plastic shell to prevent crushing
3/8″ Press Fit Magnets Available
(No need for extra donut adapters)
Ordering information
Size
Available in Brown or White,
18″ Leads - 22 AWG, Long Leads Available
Add “R” for Resistor + Value
3/4″
Closed Loop
Open Loop
SPDT
Closed Loop & Bare Magnet
Dia x .80
SD - 70
SD - 71
SD - 72
SD - 70 WB 3/8″ x 3/4″ Magnet
1″ Dia x .80
SD - 80
SD - 81
SD - 82
SD - 80 WB 3/8″ x 3/4″ Magnet
3/4″
Terminal Connect Recessed
Steel Door Recess Type
Need A
ny
Beanie
s?
Tane - 3/4 TC: 3/4″ Diameter x 1 3/16″
•
For fast and easy installations
— No more soldering or
splicing needed
•
Stubby magnet 3/4″ x .85″
Insert Wires
Here
Ordering information
Tane will substitute short magnets
when requested
(This is with 3/8″ press fit magnet)
Closed Loop
1″ Gap
Open Loop
3/4″ Gap
Closed Loop
3/4″ Gap
TANE - 3/4 TC
TANE - 3/4 BTC
TANE - 3/4 TC w/TAP-10 MAG
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
9• TANE
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 10
RECESSED CONTACTS
TANE-22 • 3/ 4″Stubby “Button Ball” Reed Contact
The TANE-22 series is available with 18″ leads or
a quick connect model for faster installations.
• Complete with Spacer and Screws
• Shorter length for tight fitting areas
Length 3/ 4″ from Flange to end on
leaded TANE-22
Length 1 3/16″ from Flange to end of
terminals for TANE-22TC
Ordering information
Style
Wire Leads (18″ std)
Closed Loop
Open Loop
S.P.D.T.
TANE-22
TANE-23
TANE-24
LEADED MODEL
Terminal Connect
TANE-22TC
TANE-23TC
TANE-24TC
TERMINAL CONNECT
RB - 32 • 3/ 4″Roller Ball Reed Contact
This 3/ 4″ roller reed ball contact uses a special
compressed plastic ball to keep it dirt and paint
resistant.
Standard Size 3/ 4″ x 1 5/ 8″
• Complete with spacers and screws
• Thin end for easy installation
• De-activated Rhodium reed switch used
Complete with Screws and Spacer
Ordering information
Closed Loop
Open Loop
S.P.D.T.
RB-32
RB-33
RB-34
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
10• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 11
RECESSED CONTACTS
Reed Plunger • PB-52 & PB-52 TC
•
•
•
•
•
•
Ideal for replacing old mechanical contacts
Good for door jams
Reed technology for long life
PB-52 with 18″ leads
PB-52 TC with terminal connects
Complete with screws & spacers
(34mm)
1.39”
PB-52
(Ø 12.8mm)
.52”
PB-52 TC
(45mm)
1.83”
(Ø 12.8mm)
.52”
(45mm)
1.83”
(44mm)
1.79”
To order specify White or Brown
Ordering Information
Closed Loop
Wire Leads
PB-52
Terminals
PB-52TC
Open Loop
PB-53
PB-53TC
TANE 3/8 ASH & RECESSED CONTACTS
TANE 3/8 ASH (Adjustable Screw Head)
Tamper Switch with Gap
Adjusting Screw.
Unit: mm
Ordering Information
To order specify White or Brown
Closed Loop
Open Loop
Tane 3/8 Ash
Tane 3/8 Ash
O.C.
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
11• TANE
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 12
RECESSED CONTACTS
1/4″
TAP - 15 •
Diameter Contact and Magnet
Gap: 3/4″
Size: 1/4″ Diameter x 1″ Length
Magnet: Magnet 1/4″ x .79″ Length
Ordering Information
Closed Loop
TAP - 15
Open Loop
S.P.D.T.
TAP - 16B
TAP - 17C
Wider Gap
Shorter
Magnet
Available
WG
3/8 X 3/4 MAG
Available in Brown or White
#22 AWG, 18″ Standard Leads, Longer Available
Gap Variations
3/4″
RFM - 25 •
1/4″
5/8″
1″
Diameter with Oval Flange and Magnet
Ideal for fitting in a track where a
regular 1/4″ would fall through
Gap: 3/4″ (see above for variations)
Size: 1/4″ Diameter x 1″ Length
Magnet: 1/4″ Diameter x 1″ Length
Flange: 3/8″ Oval Shape
Ordering Information
Wire: 22 AWG, 18″, Longer Available
Closed Loop
Open Loop
S.P.D.T.
Wider Gap
RFM - 25
RFM - 26B
RFM - 27C
WG
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
12• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 13
RECESSED CONTACTS
TANE MINI- DISC • Ultimate Thin Tight Fit Contact and Magnet
The Tane Mini-Disc is a unique contact as
it has a wide gap for its slim size
Gap: up to .70″ (18mm)
Dimensions: .60″ (15mm) x .24″ (6mm)
Flange is .71″ (18mm)
22AWG: 18″ in length
MINI - 15 •
1/4″
Diameter Contact and Magnet
Gap: 1/2″
Size: 1/4″ X 9/16″
Magnet: 1/4″ x .54″
22 AWG, 18″ Length
26 AWG, 18″ Length
• Ideal for Screens
• White or Brown
Ordering Information
Closed
Gap
Size
Mini 1/4″
Closed
Gap
1/2″
3/4″
Mini-15
Mini-15
w/Bare
1/4″x .79
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
13• TANE
Tane Catalog 2006.qxd
8/3/06
8:51 AM
Page 14
SURFACE MOUNT CONTACTS
*with special adhesive
FM-102 • Flange Mount Contact and Magnet (Side Leads)
FM: Flange Mount with special adhesive
Size: 1.33″ L x .3″ W x .53″ H
Gap: 1″ minimum
Ordering Information
Closed Loop
Open Loop
S.P.D.T.
Vent Mag
FM-102
FM-103
FM-104
FM-Mag
Brown or White, 18″ Leads minimum (Longer Available)
This is our most economical surface mount with
leads
anies
e
B
r
u
Try O
FM 106 • Flange Mount Contact and Magnet (Center Leads)
FM: Flange Mount with
special adhesive
Size: 1.33″ L x .3″ W x .53″ H
Gap: 1″ minimum
Ordering Information
Closed Loop
Open Loop
Vent Mag
FM-106
FM-107B
FM-Mag
Brown or White, 22 AWG,
FM-106 has a “Clean Break”
Flange Removal
18″ Leads minimum (Longer Available)
*Special Adhesive on back
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
14• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 15
SURFACE MOUNT CONTACTS
*with special adhesive
TANE-60 • Q.C. Quick Connect
Features:
• Screw Down or Super Adhesive
• Break Away Features for Tight Fit
• Slim Style and Installer Easy
• Eliminates Need for 6' or 10' Leads
• TAPE Cover
Gap: 3/4″ minimum
Colors: White, Brown and Grey
Carry Current: 1 Amp
Reed: De-activated Rhodium
Dimensions: L: 2″ x H: 3/8″ x W: 1/4″
Ordering information
Closed Loop
Open Loop
Extra Mag
Closed Loop Wide Gap
TANE-60
TANE-61
TANE-60 Mag
TANE-60 WG
Housing
Dimensions
$50 :1 Lifetime Guarantee
TANE-50 • Covered Screw - Quick Connect
The TANE-50 is quick, clean looking, and easy to install!
Gap: 3/4″ minimum
Colors: White, Brown, and Grey
Reed: De-activated Rhodium
Ordering Information
Closed Loop
Open Loop
Extra Mag
TANE-50
TANE-51
TANE-50 Mag
Only
Comes complete with screws, covers, & adhesive.
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
15• TANE
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 16
SURFACE MOUNT CONTACTS
SM-35 • Surface Mount * (Standard Industry Size)
Gap: 1″ to 2″.
Color: White, Brown, Grey.
Size: 21/2 ″ x 1/2 ″ x 1/2 ″
Price includes spacers, screws, and cover - NO SEPARATE PARTS
Ordering Information
Closed Loop
Open Loop
S.P.D.T.
for 13/4″ Gap
for Resistor
SM - 35
SM - 35 B
SM - 35 C
add W.G.
add “R”
SM-35 is available in 2″ gap. The SM-35 WG is
economical and ideal for heavy steel doors and
commercial wide gap needs.
TANE GP-23 • Hidden Screw — Hidden Wire — Surface Mount
All screws are hidden and all wires can be hidden in this
unique contact.
Gap: 1″ (25mm) Standard
Color: White, Brown, and Grey
Size: L: 2″ (51mm) x H: .1/2″ (13mm) x W: .3/8″ (9mm)
Ordering Information: Add WG for Wide Gap
1″ Gap
Closed Loop
Open Loop
Extra Mag
GP-23
GP-24
GP-23 MAG
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
16• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 17
SURFACE MOUNT CONTACTS
*with special adhesive
SS-40 • SUPER STICK Contact and Magnet
Size: 1.4″ L x .31″ W x .31″ H
Gap: .75″
Color: White, Brown
Ordering Information
Closed Loop
Open Loop
S.P.D.T.
Vent Mag
SS-40
SS-41B
SS-42C
SS-40 Mag
22 AWG, 18″ Leads minimum (Longer Available)
TANE-45 • SUPER STICK Miniature Type
The TANE-45 is ideal for areas where a small or slim
contact is needed.
MODEL TANE-45 has super adhesive that does not
fall off, dry-off, or freeze-off.
Size: 11/16 ″ L x 3/16 ″ W x 1/4 ″ H
Gap: .60″
Color: White, Brown, or Grey
#22 AWG, 18″ Minimum
Long leads available
Ordering Information
TANE MICRO • Ultra Mini Surface Mount Count
• Closed Loop
• Can be installed in the track of the
window or surface mounted.
• Ideal for tight fit windows where a
large gap is not needed
• Perfect for windows that
can not be drilled due to
warrantee issues
Size: 1/2 ″ L x 1/4 ″ W
Gap: 3/8 ″ “Fits on a dime”
Color: White, or Brown
.314" (8mm)
.157"
(4mm)
Magnet
Assembly
.669" (17mm)
Tane - 45 Mag
.472" (12mm)
Tane - 45
.314" (8mm)
Contact
Assembly
.157"
(4mm)
.669" (17mm)
Vent Mag
.472" (12mm)
$50:1 Lifetime Guarantee
Closed Loop
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
17• TANE
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 18
SURFACE MOUNT CONTACTS
MET-44 • Overhead Door Contact
• Small size with special push-pin that insures
cable never comes out of switch side
• Adjustable “L” bracket, magnet can be installed
10 ways!
• Armored cable in 18″ or 36″ size
• Beats industry standards!
• UNIQUE FEATURE: Besides epoxy, TANE uses a
unique pin to hold the cable in place forever.
Ordering Information
Closed Loop
18″ Cable
Closed Loop
36″ Cable
Open Loop
18″ Cable
S.P.D.T.
18″ Cable
MET - 44 - 18
MET - 44 - 36
MET - 45 - 18
MET - 46 - 18
TANE-66 • Track Mounted Over Head Door Contact
NEW
t
Produc
• For Mounting on Door Tracks
"Fork lifts can’t knock these off floors!"
• 4 way adjustable magnet bracket
• Wider Gap for reduced false alarms
• Installs better and faster than standards overheads
• Armored cable is standard
• Closed Loop, open loop and SPDT types
Ordering Information
Closed Loop
Open Loop
S.P.D.T.
TANE-66
TANE-67
TANE-68
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
18• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 19
SURFACE MOUNT CONTACTS
MET-200 • Commercial Metal Contact
Wide Gap: 1 1/4″
Size: 2″ L x 5/8″ H x 3/8″ W
Need A
n
Beanie y
s?
Wire: 22 AWG,18″ length wire, armored
cable available.
Ideal for commercial applications and
where a wide gap is needed.
ORDERING INFORMATION
Closed Loop
Open Loop
MET - 200
MET - 201
MET - 200AR for Armored Cable
MET - 201 AR
SM-20 WG Commercial Surface Mount
• Ideal for commercial or steel doors
• Wide gap to insure against swinging
• 18″ 22 AWG leads
Wide Gap: 2 1/2″
Size: 4 1/8″ L x 5/8″ H x 5/8″ W
Color: White, Brown & Grey
Ordering Information
Closed Loop
Open Loop
SM - 20 WG
SM - 21 WG
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
19• TANE
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 20
* BEANIES * MINI-SURFACE MOUNT
B Connector (Dry & Silicone Filled)
Materials:
Outer Shell:
Plastic Type
Heat Shrink Tubing
Metal Housing:
Brass
Inner Sleeve:
Beryllium Copper plated
with Bright Nickel
Contact Resistance: 10 milliohms initial
Dielectric:
1000 V
Strength of Joint: 9 lbs.
Mini Strobe Light - Very Bright, Long Life (LED Version Now Available)
• Low Current
• Red, Yellow, Clear & Blue
• Bright
200 MA
• Water Tight
• Low Cost
• Standard 12V*
*6V and 24V are available
upon request
180 MA
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
20• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 21
SIRENS
TANE SIR 202 • (UL Listed) Self Contained Siren Horn
Specifications:
• Housing Material:
ABS Plastic
• Speaker Type:
Dual Tone Siren Horn
• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle
• Rated Input Voltage:
12Volts DC
• Operating Temp:
-20°C to 60°C
• Range Voltage: 6-15VDC
• Sound Level: 115db
• Dimensions:
5.2″ diameter x 5.90″L x 5.2″H
(132mm x 150mm x 132mm)
• Speaker Type: Horn
• Color: White
• Power Rating: 15 watts
TANE SCS 101 • (UL Listed) Self Contained Dual Tone Indoor Siren
Specifications:
• Housing Material: ABS Plastic
• Speaker Type:
Voice coil impedance—8 ohm
• Rated Input Voltage: 12Volts DC
• Range Voltage: 6-15VDC
• Sound Level: 110db/m
• Current Draw:
400mA @ 12VDC 8 ohm load
• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle
• Operating Temp: -20°C to 60°C
• Dimensions:
4.3″ H x 4.3″ W x 2″ D
(108mm x 108mm x 56mm)
• Color: White
TANE BOX WSPR66A • 20 Watt Stainless Steel Box with Dual Tampers
and Dual Tone Siren
Specifications:
• Housing Material:
Stainless Steel with Dual Reed
Tampers
• Speaker Type:
Voice coil impedance—8 ohm
• Rated Input Voltage: 12Volts DC
• Range Voltage: 6-15VDC
• Sound Level: 115db/m
• Current Draw:
280mA @ 12VDC 8 ohm load
• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle
• Operating Temp: -20°C to 60°C
• Dimensions:
5.67″ H x 5.63″ W x 4″ D
(144mm x 143mm x 100mm)
• Color: Stainless Steel
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
21• TANE
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 22
SIRENS & SPEAKERS
TANE SIR 5FL • Flush Mount Dual Tone Indoor Siren
Specifications:
• Housing Material: ABS Plastic
• Speaker Type:
Voice coil impedance—8 ohm
• Rated Input Voltage:
12Volts DC
• Range Voltage: 6-15VDC
• Sound Level: 100db
• Current Draw:
400mA @ 12VDC 8 ohm load
• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle
• Operating Temp:
-20°C to 60°C
• Dimensions:
4.3″ x 4.3″ x 2.″
(108mm x 108mm x 56mm)
• Color: White
TANE SIR 508 • 30 Watt 5 x 8 Electronic Siren
Specifications:
• Housing Material: ABS Plastic
• Speaker Type:
30 Watt Dual Tone Siren
• Rated Input Voltage:
12Volts DC
• Range Voltage: 6-15VDC
• Sound Level: 120db
• Current Draw:
1500mA @ 12vdc
• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle
• Operating Temp: -20°C to 60°C
• Dimensions:
5″H x 8″W x 9″D
(127mm x 203mm x 229mm)
• Color: White
TANE SPK 202 • Speaker Horn
Specifications:
• Housing Material: ABS Plastic
• Speaker:
Voice coil impedance—6 ohm
• Operating Temp:
-20°C to 60°C
• Speaker Type:
Horn
• Dimensions:
5.2″ diameter x 5.90″L x 5.2″H
(132mm x 150mm x 132mm)
• Input Power Rating:
15 watts max.
• Color:
White
• Sound Level:
115 db
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
22• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 23
SPEAKERS
TANE SCH 101 • (UL Listed) Speaker
Specifications:
• Housing Material:
ABS Plastic
• Sound Level:
110db/m
• Speaker:
Voice coil impedance—8 ohm
• Dimensions:
4.3″ x 4.3″ x 2.″
(108mm x 108mm x 56mm)
• Input Power Rating:
15 watts continuous
20 watts peak
• Color:
White
TANE SPK 508 • 30 Watt 5 x 8 Speaker/Horn
Specifications:
• Housing Material:
ABS Plastic
• Sound Level:
120db
• Speaker:
Voice coil impedance—8 ohm
• Dimensions:
5″ x 8″ x 9″
(108mm x 108mm x 56mm)
• Speaker Type:
Horn
• Input Power Rating:
30 watts max.
• Color:
White
TANE SPK 5FL • (UL Listed) Flush Mount Speaker
Specifications:
• Housing Material:
ABS Plastic
• Sound Level:
110db
• Speaker:
Voice coil impedance—8 ohm
• Dimensions:
6.4″ x 5.04″ x 1.61″
(163mm x 127mm x 41mm)
• Speaker Type:
Cone
• Input Power Rating:
15 watts max.
• Color:
White
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
23• TANE
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 24
ALARM PRODUCTS
BNC Connectors
Magnetic
Contacts
Since 198
5
2-PC. BNC Plug W/3 Ferrules
TN5088-2X
(RG-58,59,59TFE,6)
RCA Female to BNC Male
TN50AD515
Twist-On Right Angle Plug
TN50RA2
(RG-59 & RG-62)
Twist-On BNC Plug
TN50UG882
(RG-59 & RG-62)
BNC Right Angle Plug to Jack
TN50AD503
Twist-On Right Angle Plug
TN50RA2
(RG-6)
Twist-On BNC Plug
TN50UG885
(RG-6)
2-PC Right Angle Plug W/3 Ferrules
TN50R-2X
(RG-58,59,59TFE,6)
“F” Female-BNC Male
TN50AD516
BNC Jack to Jack Barrel
TN50AD555
BNC T Connector
Plug to Jack
TN50AD505
BNC Jack T Connector
TN50AD506
TANE Coax Crimp Tool Kit
es
Includ driver
w
e
r
c
Free S
Includes the Following
• Carrying Case: Black Plastic
• 4” L Coax Stripper:
• Coax Crimp Tool & 5 Die (336C2,
Strips RG 58/59/62/6/3C2V
336C, 336g, 236PA, 336K):
Ratchet Type w/Interchangeable Die
• Bonus “Free” Screwdriver:
Phillips Type
• Cable Cutter:
For cutting cable upto .41” (10.5mm)
TN-CRIMP TOOL KIT
Die#
PIN
SQ PIN
For Crimping Coax (RG) Type Cable
336C2
.360″
9.14
.324″
8.23
.262″
6.65
.068″
1.72
6,59
336C
DIE
.319″
8.1
.256″
6.5
.213″
5.41
.068″
1.72
6,59,62,140,210,Belden 8279.
55,58,141,142,223,303,400,Fiber Optic.
336G
DIE
.255″
6.48
.213″
5.41
.137″
3.48
236PA
DIE
.324″
8.23
.255″
6.48
.213″
5.41
336K
DIE
.429″
10.9
.128″
3.25
.100″
2.54
.068″
1.72
.043″
1.09
59,62,8X,140,210,Belden 8279.
55,58,141,142,174,223,303,400,Fiber Optic.
.100″
2.50
.068″
1.72
6,58,59,62
.100″
2.54
8,9,11,87A,149,165,213,214,216,226
393,174,179,187,188,316,Belden 9913.
206
61/2″ CABLE CUTTER FOR CUTTING CABLE MAX. .41″ø (10.5mm ø)
332
4″ L COAX STRIPPER FOR STRIPPING RG58/59/62/63C2V…
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
24• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:52 AM
Page 25
CEILING MOUNT PIR DETECTOR
PIR-360A 360˚Ceiling Mount PIR Detector
NEW
t
Produc
TANE's PIR-360A is an innovative 360° ceiling mount passive infrared
detector with outstanding performance and supreme reliability that meet
demands of all kinds of professional installation. The PIR-360A is
manufactured under restrict quality control standard & backed by Tane’s
5 year warrantee.
Features
• 7m/23’ diameter range
• Thermal optic stabilization cavity
• Temperature compensation
• PCB shielded against RFI
•
•
•
•
Superior RFI/EMI immunity
Alarm indication channel
Selectable LED activation
Ceiling mount detector
Specifications
Detection Method:
Coverage:
Detection Zones:
Recommended Mounting Height:
Temperature Compensation:
Alarm Duration:
Alarm Output:
Tamper Switch:
Pulse Count:
Warm-Up Period:
Input Voltage:
Current Consumption:
Reverse Polarity Protection:
Fire Protection:
Weight:
Top View
Passive Infrared
Diameter 7m (23 feet)
31 Dual Beam
2.5m
Thermistor
1 second minimum.
Dry Contact N.C. 500mA 200Vdc
Dry Contact N.C. 3A, 200Vdc
Selectable (1, 2 or 3)
90 seconds
9 - 16Vdc
15mA@12V (standby)
Diode
ABS
170g
Detection Patterns
7m
23 ft
Max. Detection Range (at 25°C)
m
2.7
Mounting Height
(ft.)
(9)
m
6x6
Detection Range
(ft.) (20 x 20)
3.0
(10)
8x8
(26 x 26)
3.3
(11)
10 x 10
(33 x 33)
3.6
(12)
11 x 11
(36 x 36)
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
25• TANE
Tane Catalog 2006.qxd
8/3/06
8:53 AM
Page 26
PASSIVE INFRARED
Tane IR-2026 aesthetic curved design, the 2026 PIR is the
installer’s choice for a professional, hassle-free installation. A
good solution for domestic and small commercial applications.
Features
• 14m x 14m/ 46’ x 46’ coverage
• Superior RFI, EMI, ESD and lightning protection
• PCB easy lock
• Thermal optic stabilization cavity
• 1, 2 or 3 selectable pulse count
• Easy view LED
Tane’s 2026Q and TANE IR-25120 Digital Pet Immune are part of our intelligent, ultra-reliable
family of detectors with look-down zone. They offer superior RFI, EMI, ESD and lightning protection. With super immunity package the Tane’s quad sensors are able to withstand the most hostile environmental conditions. Moreover, our Full Area Vision pet immunity (TANE IR-25120) and
adaptive temperature compensation technologies achieve superior false alarm immunity in any
type of residential or commercial installation.
Tane IR-2026Q
• 15m x 15m/ 50’ x 50’ coverage
• Superior RFI, EMI, ESD and lightning protection
• Super immunity
• Selectable pulse count
(1,2 or 3)
• Remote Led enable/disable
• Thermal optic stabilization
cavity seal
Tane IR-25120 Digital Pet Immune
• 11m x 11m/ 35’ x 35’ coverage
• Animal/ pet immunity – 25lbs
• Microprocessor signal
analysis
• Digital adaptive temperature compensation
• Excellent RFI, EMI, ESD and lightning protection
• Adaptive interval pulse count
Technical Specifications
TANE IR-2026
TANE IR-25120 Digital Pet Immune
TANE IR-2026Q
Operating Voltage
Current Consumption
Alarm Duration
Pulse Count
Sensor
RFI Immunity
Alarm Output
Tamper Switch
Temp. Compensation
Dimensions
9-16Vdc
15mA@12V (standby)
1 sec. Min.
1,2 or 3
Dual Element
30V/m up to 1 GHz
Normally Closed
Normally Closed
FTC
11.4 x 6 x 5cm (4.5 x 2.4 x 2")
9-16Vdc
17mA@12V (standby)
2 sec.
1 or 2
Dual Element
40V/m up to 1GHz
Normally Closed
Normally Closed
Adaptive
11.3 x 6.4 x 4.5cm (4.3 x 2.5 x 1.8")
9-16Vdc
17mA@12v (standby)
1 sec. Min.
1,2 or 3
Quad Element
40V/m up to 1Ghz; 12,000 lux
Normally Closed
Normally Closed
FTC
11.3 x 6.4 x 4.5cm (4.4 x 2.5 x 1.8")
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
26• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:53 AM
Page 27
SHOCK SENSORS
NEW
t
Produc
MA-350
&
MA-100T
CQR MA-350 is a 3 zone shock analyzer with tamper and output relays.
CQR MA-100T is a universal single zone shock sensor analyzer which uses the well
proven time/pulse integration system. Both features a widerange sensitivity control, autoreset alarm relay and indicator. The analyser may be located within an alarm control panel
or mounted externally and has a micro-switch cover removal tamper. MA-350 may be used
to supervise up to 15 shock sensor modules and 10 on the MA-100T.
SD-1
CQR Flush mounted shock sensor - N/C Contacts. Requires analyzer.
SD-2
CQR Surface mounted shock sensor. (2 terminal) Can be mounted horizontal or
vertical N/C Contacts. Requires analyzer.
SD-3
CQR Surface mounted shock sensor. (4 terminal) Can be mounted horizontal or
vertical N/C Contacts. Requires analyzer.
SD-4
CQR Surface mounted shock sensor. (4 terminal w/ mag. contact) Can be mounted horizontal or vertical N/C Contacts. Requires analyzer.
E-Z DUC-IT CABLE & WIRE RACEWAY
NEW
t
Produc
E-Z DUC-IT is Tane's new product line of cable and wiring raceway for low voltage applications.
Available in two sizes. A variety of connectors are available in connector combo-pack. Tane's E-Z
DUC-IT product line is available in white or brown.
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
27• TANE
Tane Catalog 2006.qxd
8/3/06
8:53 AM
Page 28
TAPE • TIE WRAPS • ACCESSORIES • DIS-CONNECTS
Telephone Block and 18″ Cord
Telephone Block & Cord:
Type
Part Number
RJ31
TJ-8 (This is an 8 wire block)
Call for volume and distribution pricing. UL Approved
Ground Clamp
Brass with SS bolts
This standard ground clamp should be used for
grounding all systems.
Electrical Tape
Electrical Tape
Electrical Tape
Electrical Tape
• Durable and Strong
• UL Approved
• Available: White or Black
Packaged in sleeves of 10 rolls
The PPD-11 (Push Pull Disconnect)
is back due to popular demand!
This is a 2 wire connector with holes to either mount it, or
run the wire through to take the pressure off the wires.
Tie Wraps:
8 inches
TY-8
Available: White, Brown, or Grey
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
28• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:53 AM
Page 29
ACCESSORIES
Bits of All Types
Paddle Bits, Bell Hangers and Long Flexible Bits
Paddle Bits
Bell Hangers
1/4″ X 12″
1/4″ X 18″
1/4″ X 24″
3/8″ X 12″
3/8″ X 18″
3/8″ X 24″
1/4″ X 6″
3/8″ X 6″
1/2″ X 6″
5/8″ X 6″
3/4″ X 6″
1″ X 6″
Long Flexible Bits
1/4″ X 24″
3/8″ X 24″
1/4″ X 54″
3/8″ X 54″
THE JAMBSTICK
Insert 1/4 side of Jambstick. Select proper drilling angle, for basement
and crawl space runs, angle bit inward and away from perimeter floor
plate, for under carpet runs, angle bit under shoe molding.
Insert 3/8 end of Jambstick. Using a 3/8, bore out inner cavity for
additional room for wire and connectors. If additional room is needed,
slightly rotate Jambstick and repeat.
Call for Distributor or Large Volume Pricing on anything we produce.
All Tane Bits are made with the highest quality commercial grade
material to give you value for your money.
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
29• TANE
Tane Catalog 2006.qxd
8/3/06
8:53 AM
Page 30
ACCESSORIES
B - Connector
Magnets
(Dry & Silicone Filled)
Call for Stock Sizes & Prices.
Available Bare and Encapsulated.
Pre-Wire Plugs
MATERIALS:
Outer Shell: Plastic Type
Contact Resistance:
Heat Shrink Tubing
10 milliohms initial
Metal Housing: Brass
Dielectric: 1000 V
Inner Sleeve: Beryllium Copper plated
Strength of Joint: 9 lbs.
with Bright Nickel
Relays
1 Pole to
4 Poles,
Milliamps
to 30 amps
3/8″
3/4″
Plug
Plug
Call for more
information.
Cheap and reusable in Brown and White
TANE-WS 1 - Water Sensor with Leads
Color: White
SIZE: 21/2″L x 1/2″W x 1/2″H
Rhodium Reeds
CONTACT RATINGS
TAP contacts are available with different electrical characteristics for unusual requirements
Contact
Standard High Voltage High Power S.P.D.T.
Contact resist. (Initial) [m-ohms]
150 max.
150 max.
150 max.
150 max.
Breakdown voltage [DVC]
250 min.
300 min.
300 min.
200 min.
Insulation resistance [ohms]
1010 min.
1010 min.
1010
109 min.
Electrostatic cap [PF]
0.3 max.
0.2 max.
0.5 max.
1.5 max.
Contact capacity [VA]
10
20
70
3
Max. Conductive curr. [A]
1.0
2.0
2.5
0.5
Max. voltage [V]
100
250
100
30
Bare reeds are available in 1-A, 1-B or 1-C. (See page 2 for a description on the
manufacturing process of the best rated reeds made today)
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
30• TANE
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
Tane Catalog 2006.qxd
8/3/06
8:53 AM
Page 31
ACCESSORIES
TANE Plug-in Transformers
NEW
t
Produc
Specifications:
• TN 1220 12 Volt AC, 20 VA
• Primary: 120 Volt 60 Hz Screw
Terminals
• TN 1240 12 Volt AC, 40 VA
• Housing Color - White
• TN 1640 16.5 Volt AC, 40 VA
• Class II Plug in Transformer
• TN 2420 24 Volt AC, 20 VA
• Great for Alarm & CCTV Applications
• TN 2440 24 Volt AC, 40 VA
• TN 1620 16.5 Volt AC, 20 VA
TANE Upscale Multi-Function Utility Tool with Free Pouch
Includes the following:
• Flat Head Screwdriver
• Pliers/Cutters/Crimper
• Phillips Head Screwdriver
• Pull Out Blue LED Light
• Ruler
• Knife
• Corkscrew
TANE Safety Flash – “When You or a Loved One Must Be Seen”
Features:
• Ideal and safe for automobile
breakdowns or as an attention getter.
• High Visibility: Can be seen
over 1/2 mile away at night.
• Safe: No risk of burning yourself as with
normal road flares.
• Long lasting: Will not rot in your trunk
like normal road flares do.
• Water resistant.
Each unit tested in water.
• Makes great corporate of personal gift.
• 90 flashes per minute.
• Uses two ‘D’ cell batteries.
• Long Lasting.
125 hour average.
• Durable Each unit drop tested
from 4 feet,
• Bright Yellow Body, Amber Lens &
Orange Base for easy visibility
during the day.
• Easy and safe to use for
traffic control.
• Good fund raising project.
TANE Flasher Safe-t-flare Electronic Road Flare
Features:
• No Flame
• Water Resistant
• Takes 3 "AA" Batteries
(Not Included)
• 40 Hour Continuous Life
• Reusable Over and Over
NEW
t
Produc
• Bright Flashing Light
QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS
The Best Guarantee Since 1984 : $50-1
a
Cont
e
W
"
he
ct T
ld
Wo r
"
®
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com
31• TANE
Tane Catalog 2006.qxd
8/3/06
8:53 AM
Page 32
The Best Guarantee Since 1984: $50-1
What the above means is that we guarantee NO STICKING and NO FALSE ALARMS. If during the normal
use of TANE (TAP) contacts, you have a false alarm, we will replace the defective switch with $50 in credit
upon return of the defective switch. (If contact fails at installation we will replace it with $20
in credit, after-installation $50). This warranty is good for the life of the installation, but does not cover
sticking due to high voltage surges or lightning. (For such a rare occurance TANE will replace that contact
two for one.) The reason for such a strong warranty is due to the continued testing of our reeds in
both independent labs as well as in the field. Our reeds have been rated to over 400 million operations
without sticking and have been used in Electronics, Military and Automotive since 1979. Please call us for a
detailed brochure on either our reed switches or test reports. UL BP-4702.
*Outside of U.S.A. warranty is $20-1.
UL, CUL, CE
Free Samples Upon Request
"We Contact The World" ®
Distributors Inquiries Welcome
906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040
Tel: 800-852-5050 • 516-328-3351 • Fax: 516-326-9125
www.tanealarm.com • E-MAIL: info@tanealarm.com