Ст. Джиев, Индустриални мрежи за комуникация и управление.
Литература
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
A.S. Tanenbaum, Computer Networks, 3rd ed. Upper Englewood Cliffs, NJ, Prentice-Hall, 1996.
Audsley N.C., Burns A., Davis R.I., Tindell K.W., Wellings A.J., Fixed Priority Preemptive Scheduling, J. Real–Time Systems, 8, 1995,
pp 173–198.
Bartlett, H., J. Harvey, The Modeling and Simulation of a Pick and Place ComputerIntegrated Manufacturing (CIM) Cell, Comput. Ind., Vol. 26, No. 3, pp. 253-260,
Aug. 1995.
Bender, K., (editor), Profibus - the Fieldbus for Industrial Automation., Prentice Hall,
1992.
Berge J.,"Fieldbuses for Process Control: Engineering, Operation, Maintenance",
ISA Press 2001, ISBN 1-55617-760-7.
Bertsekas D., R. Gallager, Data Networks, 2nd ed., Englewood Cliffs, NJ, PrenticeHall, 1992.
Biegacki, S., D. VanGompel, The Application of DeviceNet in Process Control, ISA
Trans., Vol. 35, No. 2, pp. 169-176, 1996.
Black U., Physical Level Interfaces and Protocols, IEEE,
ISBN 0-8186-8824-6.
Black U., The V-series Recommendations, McGraw-Hill,
ISBN 0-07-005592-0.
Bonfig K., Feldbus-Systeme, Expert Verlag 1992, ISBN 3-8169-0771-7
Borst W., "Der Feldbus in der Maschinen- und Anlagentechnik, Franzis Verlag,
ISBN 3-7723-4621-9.
BOSCH CAN Specification - Version 2.0, Part A., R. Bosch GmbH, 1991
Breyer, R., S. Riley, Switched, Fast and Gigabit Ethernet, MacMillan Technical Publishing, 2000.
British Standard Institute, Guide to the Evaluation of Fieldbus Protocols, Report
DISC PD0014: 2000.
Brockschmidt, Kraig, Inside OLE, Second Edition, Microsoft Press, Redmond, WA,
1995.
Brown, The OSI Dictionary of Acronyms, McGraw-Hill 1993,
ISBN 0-07-057601-7.
Burton, Fieldbus for Industrial Control Systems, Chapmann & Hall 1997, ISBN 0412-57890-5.
Casey, B.J., Implementing Ethernet in the Industrial Environment, Proc. IEEE Ind.
Applicat. Soc. Ann. Meeting, vol. 2, Seattle, WA, Oct. 1990, pp. 1469-1477.
Cena, G., C. Demartini, A. Valenzano, On the Performances of Two Popular Fieldbuses, Proc. IEEE Int. Workshop Factory Commun. Syst., Barcelona, Spain, Oct.
1997, pp. 177-186.
Charzinski J., Performance of the error detection mechanisms in CAN, Proceedings
of the first Int. CAN Conference, Published by CAN in Automation, 1994.
CiA DS-301 V 3.0 CANopen Communication Profile for Industrial Systems, CAN in
Automation e. V., 1996.
CiA, Proceedings of the first Int. CAN Conference, Published by CAN in Automation, 1994.
CIP implementation in DeviceNet, ControlNet and Ethernet/IP, Open DeviceNet Vendor Association, USA, 2000.
ControlNet Specification, 2nd ed. Boca Raton, FL: ControlNet International, 1998.
164
Ст. Джиев, Индустриални мрежи за комуникация и управление.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
D. Mills, “Internet time synchronization: The network time protocol”, IEEE Trans.
Commun., vol. 39, pp. 1482-1493, Oct. 1991.
DeviceNet Specification, 2nd. ed. Boca Raton, FL, Open DeviceNet Vendors Association, 1997.
DeviceNet Specification, Open DeviceNet Vendor Association, Inc., Volume I, II, 2.03,
1997.
Djiev S., L. Pavlov, Chapter 8: Automated Systems Techniques for On-Line Quality
and Production Control in the Manufacture of Textiles - in the book: ‘Computer
Aided and Integrated Manufacturing Systems Techniques and Applications’, (C. T.
Leondes - Editor), CRC Press, Boca Raton, FL, USA., 2000, 429 p.
Djiev S., Logical Binding of I/O Data in Control-Layer Industrial Networks,
"Automation and Informatics’2000", Proceedings, ISBN 954-90020, 2000.
Djiev S., Models of Intelligent Sensors in a Deterministic Industrial Network,
"Automation and Informatics'1999", Proceedings, ISBN 954-90020-2-0, pp. 5-8
Djiev S., Object-Oriented Modeling of Intelligent Sensors in Field-Level Networks,
"Systems for Automation of Engineering and Research - SAER'98", 1998,
Proceedings, ISBN 954-8329-17-4, pp. 164-167
Djiev S., Programmable Logic Controllers and Integrated Industrial Networks,
"Automation and Informatics’2000", Proceedings, ISBN 954-90020, 2000.
Duffie N.A., An approach to the design of distributed machinery control systems.
IEEE Trans. on Industry Applications, Vol. IA–18, No. 4, July/August 1982.
E. Altman, T. Basar, and R. Srikant, “Congestion control as a stochastic control
problem with action delays”, Automatica, vol. 35, pp. 1937-1950, Dec. 1999.
Eidson, J., W. Cole, Ethernet rules closed-loop system, InTech,
pp. 39-42, June 1998.
Fieldbus Foundation., Fieldbus Foundation specifications, 1994.
Fox M.S., An organizational view of distributed systems. IEEE Trans. on systems,
man, and cybernetics. Vol. SMC–11, No. 1, Jan. 1981.
G.C. Walsh, H. Ye, and L. Bushnell, “Stability analysis of networked control systems”, in Proc. Amer. Control Conf., San Diego, CA, June1999, pp. 2876-2880.
G.F. Franklin, J.D. Powell, and M. Workman, Digital Control of Dynamic Systems,
3rd ed. Reading, MA, Addison Wesley, 1997.
Garlan D., Shaw M., An introduction to software architecture. Advances of software
engineering and knowledge engineering. Vol. 1, World scientific publishing company, 1993.
Gibson, L.D., “Autonomous control with peer-to-peer I/O networks,” Sensors, Vol.
12, No. 9, pp. 83-90, Sept. 1995.
Guth R., Lalive d’Epinay T., The Distributed Data Flow Aspect of Industrial Computer Systems, Proc. of 5th IFAC workshop on distributed computer control systems, Sabi–Sabi, South Africa, 1983.
Halevi, Y. and A. Ray, Integrated communication and control systems: Part IAnalysis. ASME Journal of Dynamic Systems, Measurement, and Control, 110(4),
pp 367–373, Dec. 1988.
Holzmann, "Design and Validation of Computer Protocols", Prentice-Hall, ISBN 013-539834-7.
IEC 61131 - Programmable Controllers., 1997,1999.
ISA SP50. Unified centralized and decentralized Fieldbus., 1989.
ISA, "Fieldbus Standard for Use in Industrial Control Systems",
ISA 1993, ISBN 1-55617-317-2.
ISA, "The ISA Fieldbus Guide", ISA 1997, ISBN 1-55617-637-6.
165
Ст. Джиев, Индустриални мрежи за комуникация и управление.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
ISO 11898 - Road vehicles - Interchange of digital information - Controller area network (CAN) for high-speed communication., 1993.
ISO 7498, Information Processing Systems - Open Systems Interconnection - Basic
Reference Model, 1984.
J. Nilsson, “Real-time control systems with delays”, Ph.D. dissertation, Dept. Automatic Control, Lund Institute of Technology, Lund, Sweden, January 1998.
J.D. Spragins, J.L. Hammond, and K. Pawlikowski, Telecommunications: Protocols
and Designs. Reading, MA, Addison-Wesley, 1991.
J.W. Overstreet and A. Tzes, “An Internet-based real-time control engineering laboratory,” IEEE Contr. Syst. Mag., vol. 19, pp. 19-34, Oct. 1999.
Jensen E.D., Boebert W.E., Partitioning and Assignment of Distributed Processing
Software. IEEE COMPCON 1976,
pp. 490–506, 1976.
Jensen E.D., Decentralized Control, Distributed Systems: An Advanced Course,
Springer Verlag, 1981.
Jones, V., MAP/TOP Networking., McGraw Hill, 1988.
K.J. Åström and B. Wittenmark, Computer-Controlled Systems: Theory and Design,
3rd ed. Englewood Cliffs, NJ: Prentice-Hall, 1997.
Khanna, V.K., S. Singh, An Improved ‘Piggyback Ethernet’ Protocol and its Analysis, Comput. Networks ISDN Syst., Vol. 26, No. 11,
pp. 1437-1446, Aug. 1994.
Kiencke, Controller Area Network – From Concept to Reality, Proc. of the first Int.
CAN Conference, Published by CAN in Automation, 1994.
Kopetz H., G. Grundsteidl, TTP – A Time Triggered Protocol for Automotive Applications, IEEE Computer, January, 1994.
Kopetz H., Real time in distributed real time systems. Proc. of the 5th IFAC Workshop on Distributed Computer Control Systems, Sabi–Sabi, South Africa, 1983.
Koren, Y., Z.J. Pasek, A.G. Ulsoy, U. Benchetrit, “Real-time open control architectures and system performance,” CIRP Annals—Manuf. Technol., Vol. 45, No. 1, pp.
377-380, 1996.
Koubias, S.A., G.D. Papadopoulos, Modern fieldbus communication architectures
for real-time industrial applications, Comput. Ind.,
Vol. 26, No. 3, pp. 243-252, Aug. 1995.
Kriesel, "Bustechnologien für die Automation, 2nd Ed.", Hüthig Verlag 2000, ISBN
3-7785-2778-9.
Krtolica, R., U. Ozguner, H. Chan, H. Goktas, J. Winkelman, and M. Liubakka, Stability of linear feed-back systems with random communication delays, International
Journal of Control, 59(4),
pp 925–953, Oct. 1994.
L. Dugard and E. I. Verriest, Eds., Stability and Control of Time-Delay Systems
(Lecture Notes in Control and Information Sciences), vol. 228. Heidelberg, Germany: Springer-Verlag, 1997.
L.H. Eccles, A smart sensor bus for data acquisition, Sensors,
Vol. 15, No. 3, pp. 28-36, 1998.
LAN Operating Systems, NRP, 1994.
Leterrier P., The FIP Protocol, Centre de Competence FIP, Nancy, France, 1992.
Lian, F.-L., J. R. Moyne, and D. M. Tilbury, Analysis and modeling of networked
control systems: MIMO case with multiple time delays, Proc. of 2001 American Control Conference, June 2001.
166
Ст. Джиев, Индустриални мрежи за комуникация и управление.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.
86.
87.
88.
89.
90.
91.
92.
93.
94.
95.
Lian, F.-L., J. R. Moyne, and D. M. Tilbury, Performance evaluation of control networks: Ethernet, ControlNet, and DeviceNet, IEEE Control Systems Magazine,
21(1), pp 66–83, Feb. 2001.
Lian, F.-L., J. R. Moyne, and D. M. Tilbury, Time delay modeling and sample time
selection for networked control systems, Proceedings of the ASME Dynamic Systems and Control Division, Nov. 2001.
Lian, F.-L.,J. Moyne, D.M. Tilbury, Control Performance Study of a Networked Machining cell, in Proc. American Control Conf., Chicago, IL, June 2000, pp. 23372341.
M. Tangemann and K. Sauer, “Performance analysis of the timed token protocol of
FDDI and FDDI-II,” IEEE J. Select. Areas Comm., vol. 9, pp. 271-278, Feb. 1991.
M.S. Branicky, “Hybrid systems: Modeling, analysis, and control,” Sc.D. dissertation, Dept. Electrical Engineering and Computer Science, Massachusetts Institute of
Technol., Cambridge, MA, June 1995.
M.S. Branicky, S.M. Phillips, and W. Zhang, “Stability of networked control systems:
Explicit analysis of delay”, in Proc. Amer. Control Conf., Chicago, IL, June 2000, pp.
2352-2357.
Martin, J., Computer Networks and Distributed Processing, Prentice-Hall, 1991.
Microsoft COM Specification, Version 0.9, 1995.
Mok A., Fundamental Design Problems of Distributed Systems for the Hard Real–
Time Environment, PhD thesis, Massachusetts Inst. of Technology, U.S.A., 1983.
Motus, Rodd, Timing Analysis of Real–Time Software, Pergamon Press,
ISBN 0-08-0420257, 1994.
Moyne, J., N. Najafi, D. Judd, A. Stock, Analysis of Sensor/Actuator Bus Interoperability Standard Alternatives for Semiconductor Manufacturing, Sensors Expo
Conf. Proc., Cleveland, OH, Sept. 1994.
Nance, B., Introduction to Networking, Que, 1994.
Nasser, D., Token Ring Troubleshooting, NRP, 1994.
Nilsson, J., Real-time control systems with delays, PhD Thesis, Lund Institute of
Technology, 1998.
OLE 2 Programming Reference, Vol. 1, Microsoft Press, Redmond, WA, 1994.
OLE Automation Programming Reference, Microsoft Press, Redmond, WA, 1996.
P. Gahinet, A. Nemirovshi, A. Laub, and M. Chilali, MATLAB LMI Control Toolbox.,
Natick, MA, MathWorks, May 1995
Paula, G., Building a Better Fieldbus., Mech. Eng., pp. 90-92, June 1997.
Phoenix, "Basic Course in Sensor/Actuator Fieldbus Technology", Vogel Verlag,
ISBN 3-8023-1708-4.
Physikalische Technische Bundesanstalt, Investigations into the Intrinsic Safety of
Fieldbus Systems, PTB 1994, ISBN 3-89429-512-0.
Pinto, J., ISA paper #94-514, Fieldbus- A Neutral Instrumentation Vendor’s Perspective,
Advances
in
Instrumentation
and
Control,
Vol 49, Part 2, pp. 669-675, October 23, 1994.
Pinto, J., ISA paper #94-598, Networked, Programmable, Intelligent I/O, The ‘Truly’
Distributed Control Revolution, Proc. of the Industrial Computing Conference, Vol
4., part 2, pp. 141-147, Oct. 23, 1994.
Popovic, D., Distributed Computer Control for Industrial Automation, Marcel Dekker,
1990.
R.S. Raji, Smart Networks for Control, IEEE Spectrum, Vol. 31, pp. 49-55, June
1994.
Ramakrishnan, K.K., H. Yang, The Ethernet Capture Effect: Analysis and Solution,
Proc. 19th Conf. Local Comp. Networks, Minneapolis, MN, Oct. 1994, pp. 228-240.
167
Ст. Джиев, Индустриални мрежи за комуникация и управление.
96.
97.
98.
99.
100.
101.
102.
103.
104.
105.
106.
107.
108.
109.
110.
111.
112.
113.
114.
115.
116.
117.
118.
119.
120.
121.
Ramamritham K., Channel Characteristics in Local–Area Hard Real–Time Systems,Computer Networks and ISDN Systems, 3–13, North–Holland, Amsterdam,
1987.
Ramseyer R.R., Arnold R.G., Applewhite H.L., Berg R.O., The modular missile born
architecture from the requirements and constraints point of view: An overview, IEEE
Proc. 1st Conf. on Distributed Computing Systems, Oct. 1979. pp. 747–756.
Ray, A., Introduction to Networking for Integrated Control Systems, IEEE Contr.
Syst. Mag., Vol. 9, pp. 76-79, Jan. 1989.
Reinert, Sichere Bussysteme für die Automation, Hüthig Verlag 2001, ISBN 3-77852797-5.
Richard Stevens, W., TCP/IP Illustrated, Addison Wesley Publishing.
Rodd M. G., Zhao G. F., Izikowitz I., An OSI–Based Real–Time Messaging System,
Journal of Real–Time systems, 2, pp. 213–234, Kluwer Academic Publishers, 1990.
S. Boyd, L. El Ghaoui, E. Feron, and V. Balakrishnan, Linear Matrix Inequalities in
System and Control Theory. Philadelphia, PA, SIAM, 1994.
S. Mascolo, “Classical control theory for congestion avoidance in high-speed Internet,” in Proc. IEEE Conf. Decision and Control, Phoenix, Dec. 1999, pp. 2709-2714.
Saad-Bouzefrane, S., F. Cottet, A Performance Analysis of Distributed Hard RealTime Applications, Proc. IEEE Int. Workshop Factory Commun. Syst., Barcelona,
Spain, Oct. 1997, pp. 167-176.
Saltzer, J.H., D.P.Reed, and D. D. Clark, End-To-End Arguments in System Design,
ACM
Transactions
on
Computer
Systems,
Vol
2,
No. 4, November 1984, pp 277-288.
Schatt, S., Understanding Local Area Networks, Prentice-Hall, 1993.
Scherff, B. Feldbussysteme in der Praxis, Springer Verlag 1999.
Schickhuber, G., O. McCarthy, Distributed Fieldbus and Control Network Systems,
Computing Contr. Eng., Vol. 8, No. 1, pp. 21-32, Feb. 1997.
Schnell, G. Bussysteme in der Automatisierungs- and Prozesstechnik (4th Ed.),
Vieweg Verlag 2000, ISBN 3-528-36569.
SIMATIC Step 7-Micro Programming. Reference manual., Siemens AG, 1995.
Sink, P., Industrial Networks - Part 1,2, Sensors, June-July, 2001.
SLC500 Reference Manual, Allen-Bradley, 1998.
Smith, P., Client/Server Computing, Sams, 1995.
Song, D., T. Divoux, F. Lepage, Design of the Distributed Architecture of a Machine-Tool Using FIP Fieldbus, Proc. IEEE Int. Conf. Application Specific Systems,
Architectures, Processors, Los Alamitos, CA, 1996, pp. 250-260.
Stallings W., Data and Computer Communications, Prentice-Hall. ISBN 0–13–
326828–4, 1995.
Tanenbaum, A. S., Modern Operating Systems, Prentice-Hall, 1992.
Tanenbaum, A.S. ,Computer Networks, 3rd ed., Upper Saddle River, NJ, PrenticeHall, 1996.
Tannenbaum A.S., Distributed Operating Systems, Prentice-Hall,
ISBN 0–13–143934–0, 1995.
Tapperson, G., ISA paper #94-569, Fieldbus: Migrating Control to Field Devices,
Advances
in
Instrumentation
and
Control,
Vol.
49,
Part 3, pp. 1239-1252, Oct. 23, 1994.
The Integrated Programmable Controls System, Telemechanique Catalogue,
Groupe Schneider,1991.
The OPC Alarm and Event Access Specification 1.0, The OPC Data Access Automation Specification 2.0, The OPC Data Access Custom Specification 2.0, The
OPC Historical Data Access Specification 1.0, OPC Foundation 1998.
168
Ст. Джиев, Индустриални мрежи за комуникация и управление.
122.
123.
124.
125.
126.
127.
128.
129.
130.
131.
132.
133.
134.
135.
136.
137.
138.
139.
140.
Thompson, Industrial Data Communications: Fundamentals and Applications, 2nd
Edition, ISA 1997, ISBN 1-55617-585-X.
Tindell K., Burns A., Guaranteeing Message Latencies on CAN, Proc. of the First
Intl. CAN Conference, Published by CAN in Automation, 1994.
Tindell, K., A. Burns, A.J. Wellings, Calculating Controller Area Net -work (CAN)
Message Response Times, Contr. Eng. Practice, Vol. 3, No. 8, pp. 1163-1169, Aug.
1995.
Törngren M., Backman, U., Evaluation of Real–Time Communication Systems for
Machine Control, Proc. of the Swedish National Association on Real-Time Systems
Conference, August 1993,
The Royal Institute of Technology, Stockholm, Sweden.
Törngren M., Modelling and Design of Distributed Real–Time Control Applications,
PhD thesis, Dept. of Machine Design, The Royal Institute of Technology, Stockholm, Sweden, 1995.
W. Lawrenz, CAN System Engineering: From Theory to Practical Applications, New
York: Springer Verlag, 1997.
Warnock I.G., Programmable Controllers - Operation and Application, Prentice Hall,
1988.
Wheelis, J.D., Process control communications: Token Bus, CSMA/CD or Token
Ring, ISA Trans., Vol. 32, No. 2, pp. 193-198, July 1993.
Wittenmark, B., J. Nilsson, and M. Torngren, Timing Problems in Real-Time Control
Systems, Proceedings of American Control Conference, pp 2000–2004, 1995.
Wolff T.O., Improvements in Real-Time Distributed Control, IEEE COMPCON,
1977, pp. 409a–409g.
Woods, S., and Keith Moore, An Analysis of HP-IB Performance in Real Test Systems, Hewlett-Packard Laboratories Technical Report, pp. 93-20, Aug. 1992.
Wybranietz, Multicast-Kommunikation in Verteilten Systemen, Springer Verlag
1987, ISBN 3-540-52551-3.
Y. Halevi and A. Ray, “Integrated communication and control systems: Part I Analysis”, J. Dynamic Sys., Meas. Contr., vol. 110, pp. 367-373.
Zhang, W., M. S. Branicky, and Stephen M. Phillips, Stability of Networked Control
Systems, IEEE Control Systems Magazine, February 2001, pp 84-99.
Боянов, К. и др., Изграждане на мрежи с малки ЕИМ, С., Техника, 1983.
Маджаров, И., Интернет и персонални компютри, ТУ София, 2002.
Николов, Л., Операционни системи, София, Ciela, 1998.
Олифер, В. Г., Н. А. Олифер, Компютерные сети, Питер, 2003.
Хаджийски М., К. Велев, Г. Сотиров, И. Калайков., Автоматизация на технологични процеси. Методи и алгоритми за управление., С.,Техника, 1992.
169
доц. д-р Станчо Николов Джиев
ИНДУСТРИАЛНИ МРЕЖИ ЗА КОМУНИКАЦИЯ И УПРАВЛЕНИЕ
Учебник
Рецензент: доц. д-р Васил Тотев Гълъбов
Стилов редактор и коректор: Стояна Иванова Саева
Технически университет - София, 2003 г.