™
Epic Collection
Decorative Area Luminaire
THE EPIC COLLECTION
MODULAR FORM
The EPIC Collection delivers custom luminaire flexibility with
the quality and availability expectations of standard
specification grade product. Offered in two (2) housing sizes,
and hundreds of unique combinations, the EPIC Collection
can be dressed to suit any application.
EXCEPTIONAL CONSTRUCTION
Designed not just to beautify, but to sustain the inherent
rigors of an outdoor environment, EPIC Collection luminaires
utilize IP66 rated silicone gasketing strategies and a 5 stage
premium polyester powder coat paint process to insure
protection from performance degrading contaminants.
MODERN PERFORMANCE
Recognizing evolving environmental and legislative trends,
EPIC Collection delivers world class optical solutions to the
decorative luminaire marketplace. EPIC Collection offers
targeted solutions for full cutoff compliance, spill light
control and path of egress illumination while integrating the
latest lamp technologies into visually comfortable lighting
solutions.
1
EPIC Collection Decorative Area Collection
TM
DESIGN FEATURES
TOP
Cast aluminum modern or classical top housing maintains a minimum 1/8" nominal
sidewall thickness. Top attaches to cast aluminum mounting arm hub with four (4)
stainless steel fasteners. One (1) piece silicone gasket between mounting hub and top
casting seals out moisture and contaminants.
MID SECTION
Milky white acrylic lens utilizes continuous silicone gaskets to seal lens to top casting
and shade. The following mid section options feature cast aluminum construction
and stainless steel assembly hardware: Solid, Window, Louvered, Slot, Solid Rings.
Luminous Rings feature clear acrylic rings suspended by stainless steel spacers and
hardware. Optional colored luminous rings utilize a colored gel film attached behind
luminous mid lens to project color along edges of rings.
SHADES
Heavy gauge precision spun aluminum shades offer superior surface finish and
consistency in form.
DOORFRAME ASSEMBLY
Used with horizontally lamped segmented optical systems. Heavy wall
die-cast aluminum door and doorframe seal to underside of shade with a thick wall
continuous silicone gasket. Door hinges opens via release of two (2) stainless steel
screws. Impact resistant 1/8" thick tempered flat or sag glass lens (clear or frosted
finish) seals to door with a one-piece silicone gasket.
OPTICAL SYSTEMS
Choice of five (5) high efficiency segmented optical systems constructed
of premium 95% reflective anodized aluminum sheet. Optical segments
are rigidly mounted inside a thick gauge aluminum housing for superior
protection. All segment faces are clean of rivet heads, tabs, or other
means of attachment which may cause streaking in the light distribution.
All reflector modules feature toolless removal, quick disconnect wiring
plugs, and are 360° field rotatable. Optional MA milky white acrylic jar
utilizes a vertical lamp orientation. Maximum 100W HID wattage on
MEM/CEM, and 250W HID on MEL/CEL. 3R and 5R options utilize a
prismatic clear tempered glass refractor along with a vertical lamp
orientation. Offered on MEM/CEM only. Vertically lamped optical
systems are secured with a die-cast retainer collar, stainless steel
hardware, and a one-piece silicone gasket, and feature standard
high reflectance white powder paint finish on underside of shade
for optimal fixture efficiency.
ELECTRICAL TRAY
Ballast and related electrical componentry are mounted to a reinforced
one piece tray with integral handle. Quick disconnect wiring plugs
allow easy tray removal during routine maintenance. Plug-in starter
standard on HPS luminaires.
FINISH
Housing and arm finished in a 5 stage premium TGIC polyester
powder coat paint, 2.5 mil nominal thickness for superior protection
against fade and wear. Standard colors include black, bronze, grey,
white, dark platinum, graphite metallic, and hartford green. RAL and
custom color matches available. Consult your Streetworks
Representative for more information.
3
EPIC Collection Decorative Area Collection
FIXTURE ATTACHMENT
Top casting secures to cast mounting
arm hub with four (4) stainless steel
fasteners. Arms are supplied
pre-wired and feature quick
disconnect wire terminals for ease
of installation.
IP RATING
"IP" stands for Ingress Protection and
is a rating system established by the
European organization IEC,
International Electrotechnical
Commission. Over 50 countries
strong, this organization publishes
international standards for electrical
products and other related
technologies. The two numbers
proceeding the "IP" individually
callout the fixture’s protection ratings
against airborne particulates and
moisture.
I
P
6
6
Ingress
Protection
Complete
No moisture
protection
within fixture
against
after a constant
dust entry
100L/min. high pressure
jet spay from all
practical directions
4
EPIC Collection Decorative Area Collection
PRODUCT MATRIX
Designed as a modular family of luminaire components, all tops, mid sections, shades, and optical systems are fully
interchangeable. Simply select a component from each category to assemble a custom built luminaire tailored to design
preference and application.
TOP
MODERN [MEM, MEL]
MEM - 9.3" H x 8.8" W
MEL - 12.8" H x 12.1" W
CLASSICAL [CEM, CEL]
CEM - 8.6" H x 8.7" W
CEL - 12.2" H x 12" W
MID SECTION
SOLID MID [STANDARD]
MEM/CEM - 3.4" H x 9.9" W
MEL/CEL - 3.8" H x 13.4" W
WINDOW MID [1]
MEM/CEM - 3.4" H x 9.9" W
MEL/CEL - 3.8" H x 13.4" W
LOUVERED MID [2]
MEM/CEM - 3.4" H x 9.9" W
MEL/CEL - 3.8" H x 13.4" W
SHADE
STRAIGHT NARROW [SN]
MEM/CEM - 6.6" H x 19.1" W
5
EPIC Collection Decorative Area Collection
STRAIGHT WIDE [SW]
MEM/CEM - 5.1" H x 23.9" W
MEL/CEL - 6.6" H x 30" W
OPTICAL SYSTEMS
Full cutoff segmented reflector (Type II, III, IV, V, SL) with clear or frosted flat lens, cutoff segmented reflector
(Type II, III, IV, V, SL) with clear or frosted sag lens, white acrylic jar, glass refractor (Type III, V—MEM, CEM).
FULL CUTOFF SEGMENTED REFLECTOR
SLOT MID [3]
MEM/CEM - 3.4" H x 9.9" W
MEL/CEL - 3.8" H x 13.4" W
BELL [BL]
MEM/CEM - 8" H x 24" W
MEL/CEL - 9.9" H x 30" W
MILKY WHITE ACRYLIC JAR [MA]
SOLID RINGS [4]
MEM/CEM - 3.4" H x 12" W
MEL/CEL - 3.8" H x 15.8" W
GLASS REFRACTOR [3R, 5R]
LUMINOUS RINGS [6]
MEM/CEM - 3.4" H x 12" W
MEL/CEL - 3.8" H x 15.8" W
FLUTE [FL]
MEM/CEM - 6" H x 22.5" W
MEL/CEL - 8.4" H x 31.8" W
6
EPIC Collection Decorative Area Collection
OPTICAL EXCELLENCE
Streetworks segmented optical systems establish themselves as an industry benchmark for excellence in
performance. Our commitment to optical research and precision build quality result in unequaled levels of performance
and repeatability.
FLAWLESS FACETS
Reflector facets are flat and unobstructed, allowing for a perfect reflection of the
lamp’s arctube. All segment faces are clean of rivet heads, tabs, or other means of
attachment which may cause streaking in the light distribution.
RIGID CONSTRUCTION
A rigid box enclosure shields optical facets on all sides from performance
degrading damage. Each facet bank is secured to both top and bottom of the
enclosure for repeatable facet orientation relative to light center.
SPILL LIGHT CONTROL
The solution for spill light concerns and perimeter
lighting applications is the SLE—
Spill Light Eliminator optic.
SPILL LIGHT ELIMINATOR (SLE)
Allowing less than 2% of the total lamp output to fall behind
the pole with no sacrifice in forward reaching performance,
the SLE is the benchmark for effective spill control. Used
along site perimeters and property lines, the SLE keeps the
light inside and the darkness out. Available with solid mid
option only.
7
EPIC Collection Decorative Area Collection
Emerging trends in light control and environmental preservation require innovative design solutions. EPIC Collection
responds.
FULL CUTOFF PERFORMANCE
As the nations respected authority on lighting standards
and design recommendations, the IESNA, Illuminating
Engineering Society of North America defines four (4)
unique luminaire cutoff classifications to quantify the
amount of light a fixture directs upward toward the sky.
ALLOWABLE CANDELA
@ 90°
Full Cutoff
0
10%
Cutoff
2.5%
10%
Semi-Cutoff
5%
20%
Non-Cutoff
No Limit
No Limit
FULL CUTOFF
Full cutoff and cutoff classified luminaires carry the
endorsement of the International Dark Sky Association
(IDA) for their usefulness in limiting the detrimental effects
of sky glow, otherwise referred to as light pollution.
When faced with local
or state adopted lighting
ordinances, full cutoff
luminaires offer direct
compliance in most all
circumstances.
@ 80°
90°
When specified with flat glass and a solid mid section,
each of the EPIC Collection’s horizontally lamped
segmented optical systems meets the strictest “Full Cutoff”
classification requirements, ensuring that zero measurable
light is directed upward from this luminaire.
0°
HORIZONTAL LAMP POSITION
A horizontal lamp orientation allows for a broad selection of luminaire
distribution shapes. Optical systems are available in Type II, III, IV, SL
Forward Throw, and Square Type V distributions.
2S
3S
4S
SL
5S
ROTATIONAL FLEXIBILITY
Optical assemblies offer full 360° rotational capability, allowing precise
adjustment of the optical distribution.
SAG LENS
Available sag glass lens provides cutoff
classification. Improves fixture visibility
while providing a subtle performance
gain.
8
EPIC Collection Decorative Area Collection
OPTICAL SYSTEMS
FROSTED LENS [F, R]
Available frosted flat or sag glass lens reduces fixture brightness while visually
softening the light distribution. Particularly useful in low mounting height
applications, and in public environments where pedestrians may have direct
line-of-sight exposure to lamp brightness.
MILKY WHITE ACRYLIC JAR [MA]
Available translucent white acrylic jar utilizes a vertical lamp orientation to
achieve a round Type V distribution with minimal fixture brightness.
Underside of shade is finished in a high reflectance white powder coat paint
to maximize efficiency. Particularly useful in low mounting height applications
and in areas with heavy pedestrian activity. Maximum 100W HID wattage on
MEM/CEM, 250W HID MEL/CEL.
GLASS REFRACTOR [3R, 5R]
Available tempered clear prismatic glass refractor utilizes a vertical lamp
orientation to achieve either a Type III or V distribution. Available on
MEM/CEM fixtures only.
COLOR CAPABILITIES
Infuse a splash of color to any Epic Collection fixture by specifying the
colored luminous rings option. A colored gel film attached to the inside of the
white acrylic mid section lens sends vibrant hues of color to the edges of each
clear acrylic ring. Standard colors include Deep Green, Bright Blue, Red, and
Warm Orange.
9
EPIC Collection Decorative Area Collection
EGRESS & APPLICATIONS
EGRESS EMERGENCY LIGHTING
EPIC Collection offers numerous options for providing illumination to the Path of Egress under emergency conditions.
Q [Quartz Restrike]
Auxiliary quartz socket mounted to optical assembly. Quartz
lamp energizes upon power reactivation and extinguishes once
HID lamp re-ignites.
E [Quartz Restrike with Time Delay]
Auxiliary quartz socket mounted to optical assembly. Quartz
lamp energizes upon cold start and power reactivation,
extinguishing once HID lamp has achieved partial brightness.
C [Emergency & Separate Circuit]
Auxiliary quartz socket mounted to optical assembly. Socket is
wired to separate relay controlled emergency power source.
42/57/70/114/140 CF
Fluorescent lamp source combined with electronic ballast
achieves full brightness within seconds of reactivation.
SITE LIGHTING APPLICATIONS
Each site presents unique challenges of shape, design criteria, and environmental concerns. Whether designing for
Illuminance, Luminance or Small Target Visibility (STV), the available selection of distribution shapes, lamp options,
and housing sizes provide a myriad of tools to custom tailor your lighting solution.
SL
SL
Type V
Type V
Type V
Type V
Type V
Type V
Type V
Type V
Type II
Type II
Type III
11
EPIC Collection Decorative Area Collection
Type III
Type III
Type III
Type III
Type III
OPTIONS AND ACCESSORIES
Modern
Architectural
Nostalgic
FINIALS
Choice of three (3) cast aluminum decorative
finials. Offered as an accessory option on
traditional pole mount arms only.
SAG GLASS
3/16" thick convex tempered clear or frosted
glass lens. Useful in applications where full
cutoff classification is not required. Improves
fixture visibility while providing a subtle
performance gain.
VANDAL SHIELD
3/16" thick molded polycarbonate convex lens.
Treated with UV inhibitor to discourage the
gradual discoloration that results from exposure
to sunlight and Metal Halide lamps. Available
on MEM/CEM fixtures only (100W Max.).
NEMA
Photocontrol
Receptacle
NEMA
Photocontrol
Receptacle
WIRE GUARD
Steel wire guard assembly provides added
protection against glass breakage by vandals.
Available on MEM/CEM fixtures only.
Compatible with both flat and sag lens.
Finished in black powder coat paint.
PHOTOCONTROL
Offered as an accessory option for Traditional
and bishop pole mount arms and tenon
adapters. Gasketed photocell receptacle
accepts a standard NEMA base photocontrol
(ordered separately). Located immediately
above fixture head on Traditional arms and
tenon adapter. Location is integral to the pole
cap on Bishop style arms.
HOUSE SIDE SHIELD
Internal house side shield is specially designed
to reduce light concentration behind the pole
while maintaining street side efficiency.
Available on Type II, III, and IV distributions
only.
12
EPIC Collection
Decorative Area Collection
POLE MOUNT SPECIFICATIONS
Pole mount arms are designed to fit both medium MEM/CEM and large MEL/CEL series housings. Arms feature a
precision welded cast aluminum mounting hub for attachment of fixture head to arm with four (4) stainless steel
fasteners.
33 1/2" [852 mm]
33 1/2" [852 mm]
Radius
12''
[304 mm]
Radius
12''
[304 mm]
2''
[51 mm]
62" [1575 mm]
2''
[51 mm]
54 3/16''
[1376 mm]
BISHOP SINGLE POLE MOUNT ARM
[SA6105, SA6154, SA6005, SA6054]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 24 lbs. E.P.A: .92
54 3/16''
[1376 mm]
BISHOP SINGLE POLE MOUNT ARM
WITH CROSS ROD
[SA6106, SA6155, SA6006, SA6055]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 25 lbs. E.P.A: .98
Radius
12''
[304 mm]
2''
[51 mm]
54 3/16''
[1376 mm]
BISHOP TWIN POLE MOUNT ARM
[SA6107, SA6156, SA6007, SA6056]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.43
62" [1575 mm]
Radius
12''
[304 mm]
2''
[51 mm]
54 3/16''
[1376 mm]
35 7/8"
[911 mm]
18 7/8"
[480 mm]
26 3/4" [679 mm]
30 15/16" [786 mm]
26 3/4" [679 mm]
30 15/16" [786 mm]
BISHOP TWIN POLE MOUNT
ARM WITH CROSS RODS
[SA6108, SA6157, SA6008, SA6057]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 39 lbs. E.P.A: 1.55
TRADITIONAL SINGLE POLE
MOUNT ARM
[SA6109, SA6158, SA6009, SA6058]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 20 lbs. E.P.A: .86
TRADITIONAL SINGLE POLE MOUNT ARM
WITH ROUNDED UPPER BAR
[SA6110, SA6159, SA6010, SA6059]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.4
30 15/16" [786 mm]
30 15/16" [786 mm]
26 3/4" [679 mm]
26 3/4" [679 mm]
18 7/8"
[480 mm]
35 7/8"
[911 mm]
18 7/8"
[480 mm]
35 7/16"
[900 mm]
35 7/16"
[900 mm]
26 3/4" [679 mm]
30 15/16" [786 mm]
TRADITIONAL SINGLE POLE MOUNT ARM
WITH ROUNDED LOWER BAR
[SA6111, SA6160, SA6011, SA6060]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 25 lbs. E.P.A: 1.16
13
EPIC Collection Decorative Area Collection
TRADITIONAL SINGLE POLE MOUNT ARM
WITH 45¡ UPPER BAR
[SA6112, SA6161, SA6012, SA6061]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.38
TRADITIONAL SINGLE POLE MOUNT ARM
WITH 45¡ LOWER BAR
[SA6113, SA6162, SA6013, SA6062]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 25 lbs. E.P.A: 1.14
35 7/16 "
[900 mm]
35 7/16 "
[900 mm]
18 7/8"
[480 mm]
26 3/4" [679 mm]
26 3/4" [679 mm]
26 3/4" [679 mm]
30 15/16" [786 mm]
TRADITIONAL SINGLE POLE MOUNT ARM
WITH 45¡ UPPER STRAP
[SA6114, SA6163, SA6014, SA6063]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 24 lbs. E.P.A: 1.17
57" [1448 mm]
53 1/2" [1359 mm]
26 3/4" [679 mm]
53 1/2" [1359 mm]
57" [1448 mm]
53 1/2" [1359 mm]
57" [1448 mm]
TRADITIONAL TWIN POLE MOUNT ARM
[SA6116, SA6165, SA6016, SA6065]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 30 lbs. E.P.A: 1.44
TRADITIONAL TWIN POLE MOUNT ARM
WITH ROUNDED UPPER BARS
[SA6117, SA6166, SA6017, SA6066]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.28
57" [1448 mm]
53 1/2" [1359 mm]
26 3/4" [679 mm]
35 7/16 "
[900 mm]
18 7/8"
[480 mm]
18 7/8"
[480 mm]
35 7/16"
[900 mm]
35 7/16 "
[900 mm]
26 3/4" [679 mm]
53 1/2" [1359 mm]
57" [1448 mm]
TRADITIONAL TWIN POLE MOUNT ARM
WITH ROUNDED LOWER BARS
[SA6118, SA6167, SA6018, SA6067]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 40 lbs. E.P.A: 2.04
TRADITIONAL TWIN POLE MOUNT ARM
WITH 45¡ UPPER BARS
[SA6119, SA6168, SA6019, SA6068]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.24
TRADITIONAL TWIN POLE MOUNT ARM
WITH 45¡ LOWER BARS
[SA6120, SA6169, SA6020, SA6069]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 40 lbs. E.P.A: 2.0
35 7/16 "
[900 mm]
26 3/4" [679 mm]
53 1/2" [1359 mm]
57" [1448 mm]
TRADITIONAL TWIN POLE MOUNT ARM
WITH 45¡ UPPER STRAPS
[SA6121, SA6170, SA6021, SA6070]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.81
TENON ADAPTER
[SA6022, SA6071, SA6122, SA6172]
Attaches to a 2 3/8" O.D. horizontal tenon.
Weight: 4 lbs. E.P.A: .08
14
EPIC Collection Decorative Area Collection
DECORATIVE POLE DETAILS
Decorative pole bases are manufactured of 356.2 copper free cast aluminum. Bases maintain a minimal wall thickness of
.250 inches. Extruded smooth or fluted shafts are manufactured of 6063 aluminum and are circumferentially welded to
the base. Anchor bolt locations are cast within the base. Anchor bolts are hot dip galvanized steel. Poles are finished in a
premium TGIC polyester powder coat for superior weatherability characteristics.
SAE
Seattle
Base Height: 23"
Bolt Circle: 8"
TPA
Tampa
Base Height: 30"
Bolt Circle: 11"
BRW
Broadway
Base Height: 42"
Bolt Circle: 12"
APN
Aspen
Base Height: 40"
Bolt Circle: 15"
SHD
Sheridan
Base Height: 36"
Bolt Circle: 9"
Shaft
Pole
Diameter Height
4"
8', 10', 12',
14', 16'
Shaft
Pole
Diameter Height
5"
8', 10', 12',
14', 18'
(Round
Tapered
Aluminum Only)
Shaft
Pole
Diameter Height
8" x 4"
8', 10', 12', 14',
16', 18', 20'
Shaft
Pole
Diameter Height
6" x 4"
10', 12', 14',
16', 18'
(Steel Only)
Shaft
Pole
Diameter Height
4"
8', 10', 12'
15
EPIC Collection Decorative Area Collection
BASE TYPE
APN=Aspen 1
BRW=Broadway 1
MDN=Charleston
BGN=Chesapeake
SHD=Sheridan
SEA=Seattle
TPA=Tampa
UBC=Utica
RMN=Washington 3
MOUNTING
HEIGHT (ft.)
08=8'
10=10'
12=12'
14=14'
16=16'
18=18'
20=20'
SHAFT SIZE
at Base
4=4"
5=5"
6=6"
8=8" 1
WALL
THICKNESS
(gauge)
0=.125
1=.156
2=.188
SHAFT TYPE
RS=Round
Straight
RT=Round
Tapered 2
SF=Straight
Fluted
MOUNTING
5=3" O.D. Tenon
X=None
COLOR
AP=Grey
BK=Black
BZ=Bronze
DP=Dark
Platinum
WH=White
GN=Hartford
Green
GM=Graphite
Metallic
OPTIONS
C=Convenience
Outlet
E=GFI Convenience
Outlet
G=Ground Lug
NOTES: 1 Round Tapered only.
2 All “RT” shafts are tapered to 4".
RMN
Washington 3
Base Height: 21"
Bolt Circle: 10 3/4"
MDN
Charleston
Base Height: 30"
Bolt Circle: 10 3/4"
BGN
Chesapeake
Base Height: 40 1/2"
Bolt Circle: 12 1/4"
UBC
Utica
Base Height: 28"
Bolt Circle: 10 3/4"
Shaft
Diameter
4"
5"
6"
Shaft
Diameter
4"
5"
6"
Shaft
Diameter
4"
5"
Shaft
Diameter
4"
5"
Pole
Height
8', 10', 12'
8', 10', 12', 14', 16', 18'
12', 14', 16', 18', 20'
Pole
Height
8', 10', 12'
8', 10', 12', 14', 18'
16', 18', 20'
Pole
Height
8', 10', 12'
8', 10', 12', 14'
Pole
Height
8', 10', 12'
8', 10', 12'
16
EPIC Collection Decorative Area Collection
ORDERING INFORMATION
Sample Number: MEM17MWW2SXSNBK
Product Family
MEM=Modern
Epic
Medium
CEM=Classic
Epic
Medium
1
Lamp
Wattage
HID 2
50=50W
70=70W
10=100W
15=150W
17=175W
Compact
Fluorescent
42=42W 3
57=57W 3, 4
Electrodeless
Fluorescent 5
55=55W
85=85W
Lamp Type 6
C=Compact Fluorescent
M=MH
S=HPS
Q=QL Induction
Accessories (order separately/replace XX with color suffix)
MEM Modern Epic Medium Arms
SA6105-XX=MEM Bishop Single Pole Mount Arm
SA6106-XX=MEM Bishop Single Pole Mount Arm with Cross Rod
SA6107-XX=MEM Bishop Twin Pole Mount Arm
SA6108-XX=MEM Bishop Twin Pole Mount Arm with Cross Rods
SA6109-XX=MEM Traditional Single Pole Mount Arm
SA6110-XX=MEM Traditional Single Pole Mount Arm with Rounded
Upper Bar
SA6111-XX=MEM Traditional Single Pole Mount Arm with Rounded
Lower Bar
SA6112-XX=MEM Traditional Single Pole Mount Arm with 45° Upper Bar
SA6113-XX=MEM Traditional Single Pole Mount Arm with 45° Lower Bar
SA6114-XX=MEM Traditional Single Pole Mount Arm with 45° Upper
Strap
SA6116-XX=MEM Traditional Twin Pole Mount Arm
SA6117-XX=MEM Traditional Twin Pole Mount Arm with Rounded Upper
Bars
SA6118-XX=MEM Traditional Twin Pole Mount Arm with Rounded Lower
Bars
SA6119-XX=MEM Traditional Twin Pole Mount Arm with 45° Upper Bars
SA6120-XX=MEM Traditional Twin Pole Mount Arm with 45° Lower Bars
SA6121-XX=MEM Traditional Twin Pole Mount Arm with 45° Upper
Straps
SA6122-XX=MEM Tenon Adapter for 2 3/8" O.D. Horizontal Tenon
Distribution
MA=Milk White Acrylic Jar 7, 8
2S=Type II
3R=Type III Glass 8
3S=Type III
4S=Type IV
SL=Forward Throw Spill Light
Eliminator
5R=Type V Glass 8
5S=Type V
SL=Spill Light Eliminator 9
Ballast Type 6
C=CWI
H=Reac./HPF
K=10Kv CW
N=NIX/NPF
P=HIX/HPF
R=Reac./NPF
W=CWA
F=Fluorescent
I=Induction
Mid Section Type
X=Solid (Standard)
1=Window
2=Louvered
3=Slot
4=Solid Rings
5=Luminous Rings
Optional Mid Section Type
6=Luminous Rings—Red
7=Luminous Rings—Bright Blue
8=Luminous Rings—Deep Green
9=Luminous Rings—Warm Orange
Voltage 6
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
K=120/277V wired at 120V
L=277/120V wired at 277V
N=Multi-Tap wired at 277V
W=Multi-Tap wired at 120V
Shade Type
SN=Straight Narrow
SW=Straight Wide
BL=Bell
FL=Flute
Color (add as suffix/must specify)
AP=Grey
BK=Black
BZ=Bronze
DP=Dark Platinum
GM=Graphite Metallic
GN=Hartford Green
WH=White
CEM Classical Epic Medium Arms
SA6154-XX=CEM Bishop Single Pole Mount Arm
SA6155-XX=CEM Bishop Single Pole Mount Arm with Cross Rod
SA6156-XX=CEM Bishop Twin Pole Mount Arm
SA6157-XX=CEM Bishop Twin Pole Mount Arm with Cross Rods
SA6158-XX=CEM Traditional Single Pole Mount Arm
SA6159-XX=CEM Traditional Single Pole Mount Arm with Rounded
Upper Bar
SA6160-XX=CEM Traditional Single Pole Mount Arm with Rounded
Lower Bar
SA6161-XX=CEM Traditional Single Pole Mount Arm with 45° Upper Bar
SA6162-XX=CEM Traditional Single Pole Mount Arm with 45° Lower Bar
SA6163-XX=CEM Traditional Single Pole Mount Arm with 45° Upper
Strap
SA6165-XX=CEM Traditional Twin Pole Mount Arm
SA6166-XX=CEM Traditional Twin Pole Mount Arm with
Rounded Upper Bars
SA6167-XX=CEM Traditional Twin Pole Mount Arm with
Rounded Lower Bars
SA6168-XX=CEM Traditional Twin Pole Mount Arm with 45° Upper Bars
SA6169-XX=CEM Traditional Twin Pole Mount Arm with 45° Lower Bars
SA6170-XX=CEM Traditional Twin Pole Mount Arm with 45° Upper Straps
SA6172-XX=CEM Tenon Adapter for 2 3/8" O.D. Horizontal Tenon
OA/RA1016=NEMA Photocontrol—Multi-Tap
OA/RA1027=NEMA Photocontrol—480V
OA/RA1201=NEMA Photocontrol—Multi-Tap (347V)
10
Options (add as suffix)
1=Single Fuse 11
2=Double Fuse 11
C=Emergency Quartz—Separate Circuit 12
E=Emergency Quartz with Time Delay 12
F=Frosted Flat Glass
H=House Side Shield 13
L=Lamp Included
Q=Quartz Standby 12
R=Frosted Sag Glass
V=Vandal Shield (100W Max.)
W=Wire Guard
S=Sag Glass
NOTES: 1 Arms not included. Order Separately. See accessories.
2 All HID lamps are medium-base.
3 Compact Fluorescent lamp only. Available in Type 3S, 4S and 5S and all vertical optical systems
4 Nominal M.O.L. lamp length of 57W CFL not to exceed 7"
5 Electrodeless Fluorescent QL lamp only. Available in vertically lamped optical systems only. 120V only.
6 Refer to technical section for lamp/ballast/voltage compatibility.
7 Maximum wattage of 100W HID.
8 Vertical Lamp Only.
9 SLE only available with Solid Mid selection.
10 Custom and RAL color matching available upon request. Consult your Cooper Lighting Representative for more information.
11 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V.
12 Quartz options not available on SL optic, or vertical lamped optical systems.
13 House side shields available on horizontally lamped 2S, 3S, and 4S optical systems only.
14 Traditional Arm Only.
15 Not compatible with finials.
Accessory Options (add as suffix to accessory)
M=Modern Finial 14
A=Architectural Finial 14
N=Nostalgic Finial 14
4=NEMA Twistlock Photocontrol Receptacle 15
SHIPPING DATA
MEM | CEM
Net. Weight (lbs.)
37
Volume (cu. ft.)
18
E.P.A. Flat Lens
.94
Sag Lens
1.04
NOTE: The above are approximate weights and volumes.
STANDARD COLORS
BK
Black
AP
Grey
17
EPIC Collection Decorative Area Collection
BZ
Bronze
WH
White
DP
Dark Platinum
GM
Graphite Metallic
GN
Hartford Green
ORDERING INFORMATION
Sample Number: MEL25MWW2SXSWBK
Product Family
MEL=Modern
Epic
Large
CEL=Classical
Epic
Large
1
Lamp
Wattage 2
HID
15=150W
17=175W
25=250W
32=320W 3
35=350W 3
40=400W 4
Compact
Fluorescent
70=70W 5
11=114W
(2) 57W 6
14=140W
(2) 70W 6
Electrodeless
Fluorescent 7
55=55W
85=85W
Lamp Type 8
C=Compact Fluorescent
M=MH
S=HPS
Q=QL Induction
Accessories (order separately/replace XX with color suffix)
MEL Modern Epic Large Arms
SA6005-XX=MEL Bishop Single Pole Mount Arm
SA6006-XX=MEL Bishop Single Pole Mount Arm with Cross Rod
SA6007-XX=MEL Bishop Twin Pole Mount Arm
SA6008-XX=MEL Bishop Twin Pole Mount Arm with Cross Rods
SA6009-XX=MEL Traditional Single Pole Mount Arm
SA6010-XX=MEL Traditional Single Pole Mount Arm with Rounded
Upper Bar
SA6011-XX=MEL Traditional Single Pole Mount Arm with Rounded
Lower Bar
SA6012-XX=MEL Traditional Single Pole Mount Arm with 45° Upper Bar
SA6013-XX=MEL Traditional Single Pole Mount Arm with 45° Lower Bar
SA6014-XX=MEL Traditional Single Pole Mount Arm with 45° Upper Strap
SA6016-XX=MEL Traditional Twin Pole Mount Arm
SA6017-XX=MEL Traditional Twin Pole Mount Arm with Rounded
Upper Bars
SA6018-XX=MEL Traditional Twin Pole Mount Arm with Rounded
Lower Bars
SA6019-XX=MEL Traditional Twin Pole Mount Arm with 45° Upper Bars
SA6020-XX=MEL Traditional Twin Pole Mount Arm with 45° Lower Bars
SA6021-XX=MEL Traditional Twin Pole Mount Arm with 45° Upper Straps
SA6022-XX=MEL Tenon Adapter for 2 3/8" O.D. Horizontal Tenon
Distribution
MA=Milk White Acrylic Jar 9
2S=Type II
3S=Type III
4S=Type IV
SL=Forward Throw Spill Light
Eliminator
5S=Type V
SL=Spill Light Eliminator 10
Ballast Type 8
C=CWI
H=Reac./HPF
K=10Kv CW
N=NIX/NPF
P=HIX/HPF
R=Reac./NPF
W=CWA
F=Fluorescent
I=Induction
Mid Section Type
X=Solid (Standard)
1=Window
2=Louvered
3=Slot
4=Solid Rings
5=Luminous Rings
Optional Mid Section Type
6=Luminous Rings—Red
7=Luminous Rings—Bright Blue
8=Luminous Rings—Deep Green
9=Luminous Rings—Warm Orange
Voltage 8
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
K=120/277V wired at 120V
L=277/120V wired at 277V
N=Multi-Tap wired at 277V
W=Multi-Tap wired at 120V
Shade Type
SW=Straight Wide
BL=Bell
FL=Flute
Color (add as suffix/must specify)
AP=Grey
BK=Black
BZ=Bronze
DP=Dark Platinum
GM=Graphite Metallic
GN=Hartford Green
WH=White
CEL Classical Epic Large Arms
SA6054-XX=CEL Bishop Single Pole Mount Arm
SA6055-XX=CEL Bishop Single Pole Mount Arm with Cross Rod
SA6056-XX=CEL Bishop Twin Pole Mount Arm
SA6057-XX=CEL Bishop Twin Pole Mount Arm with Cross Rods
SA6058-XX=CEL Traditional Single Pole Mount Arm
SA6059-XX=CEL Traditional Single Pole Mount Arm with Rounded
Upper Bar
SA6060-XX=CEL Traditional Single Pole Mount Arm with Rounded
Lower Bar
SA6061-XX=CEL Traditional Single Pole Mount Arm with 45° Upper Bar
SA6062-XX=CEL Traditional Single Pole Mount Arm with 45° Lower Bar
SA6063-XX=CEL Traditional Single Pole Mount Arm with 45° Upper Strap
SA6065-XX=CEL Traditional Twin Pole Mount Arm
SA6066-XX=CEL Traditional Twin Pole Mount Arm with Rounded
Upper Bars
SA6067-XX=CEL Traditional Twin Pole Mount Arm with Rounded
Lower Bars
SA6068-XX=CEL Traditional Twin Pole Mount Arm with 45° Upper Bars
SA6069-XX=CEL Traditional Twin Pole Mount Arm with 45° Lower Bars
SA6070-XX=CEL Traditional Twin Pole Mount Arm with 45° Upper Straps
SA6071-XX=CEL Tenon Adapter for 2 3/8" O.D. Horizontal Tenon
11
Options (add as suffix)
1=Single Fuse 12
2=Double Fuse 12
C=Emergency Quartz—Separate Circuit 13
D=Dual Fluorescent Switching Control 14
E=Emergency Quartz with Time Delay 13
F=Frosted Flat Glass
H=House Side Shield 15
L=Lamp Included
Q=Quartz Standby 13
R=Frosted Sag Glass
S=Sag Glass
Accessory Options (add as suffix to accessory)
M=Modern Finial 16
A=Architectural Finial 16
N=Nostalgic Finial 16
4=NEMA Twistlock Photocontrol Receptacle 17
NOTES: 1 Arms not included. Order Separately. See accessories.
2 All HID lamps are mogul-base.
3 320 and 350W Pulse Start Metal Halide only.
4 400W MH requires reduced envelope ED28 Lamp.
5 Single 70W Compact Fluorescent lamp available with vertical optical systems only. 120 through 277V only.
6 Dual 57 and 70W Compact Fluorescent lamp option available in Type 4S distribution only. 120 through 277V only.
7 Electrodeless Fluorescent QL lamp only. Available in vertically lamped optical systems and Type 3S and 5S distributions only. 120V only.
8 Refer to technical section for lamp/ballast/voltage compatibility.
9 Vertical lamp option only. Maximum wattage of 250W HID.
10 SLE only available with Solid Mid selection.
11 Custom and RAL color matching available upon request. Consult your Cooper Lighting Representative for more information.
12 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V.
13 Quartz options not available with SL optic or vertical lamped optical systems.
14 Dual switching requires dual 57W or dual 70W Compact Fluorescent lamps, and allows independent switching control of each lamp through use of two (2) electronic ballasts.
Allows 50% power reduction when dual ballasts are independently wired and controlled.
15 House side shield available on horizontally lamped 2S, 3S, and 4S optical systems only.
16 Finials compatible with Traditional Arms only.
17 Not compatible with finials.
SHIPPING DATA
MEL | CEL
Net. Weight (lbs.)
50
Volume (cu. ft.)
25
E.P.A. Flat Lens
1.55
Sag Lens
1.75
NOTE: The above are approximate weights and volumes.
STANDARD COLORS
BK
Black
AP
Grey
BZ
Bronze
WH
White
DP
Dark Platinum
GM
Graphite Metallic
GN
Hartford Green
18
EPIC Collection
Decorative Area Collection
CUSTOMER FIRST CENTER
1121 HIGHWAY 74 SOUTH
PEACHTREE CITY, GEORGIA 30269
770.486.4800
FAX: 770.486.4801
Domestic Facilities, USA
Cranbury, New Jersey
Elk Grove Village, Illinois
Irving, Texas
Ontario, California
Peachtree City, Georgia
International Sales, USA
Peachtree City, Georgia
The Cooper Lighting Family
Halo
Portfolio
Metalux
Neo-Ray
Corelite
Lumark
Invue
McGraw-Edison
Streetworks
Sure-Lites
Fail-Safe
Shaper
Iris
Lumière
MWS
RSA
CANADA
Cooper Lighting
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
905.507.4000
Fax: 905.586.7049
Domestic Facilities, Canada
Calgary, Alberta
Chomedey, Laval P.Q.
Cooper Lighting
All rights reserved
Printed in USA
Streetworks...The Complete Outdoor Lighting Solution!
w w w. c o o p e r l i g h t i n g . c o m
ADW040843