v1.0.0
DETECTION DEVICES 2016
EFECTIVE PRICES SINCE FEBRUARY 2ND, 2015
ÍNDICE
2016 GENERAL SALES TERMS
3
2.1 Passive Infrared (PIR) Motion Detectors
6
Wired Passive Infrared (PIR) Motion Detectors with Grade 2 and 36
Accesories and Options
7
Wireless Passive Infrared (PIR) Motion Detectors
7
Long Range Passive Infrared (PIR) Motion Detectors
8
Accesories and Options
9
Outdoor Passive Infrared (PIR) Motion Detectors
9
2.2 Dual Tech (DT) Motion Detector
11
Dual Tech (DT) Motion Detector with Grade 2 & 3
Accesories and Options
Outdoor Dual Tech (DT) Motion Detector
Accesories and Options
11
14
14
14
2.3 Acoustic Detectors
15
15
15
Wired Glass Break Acoustic Detectors
Wireless Glass Break Acoustic Detectors
2.4 Vibration Sensors
16
Vibration Sensors for Impacts/Shocks Detection
Wired Vibration/Seismic Sensor
Accesories and Options
Wireless Vibration/Seismic Sensor
16
16
17
17
2.5 Magnetic Contacts
18
Grade 2 & 3 Surface Mount Contacts
Grade 2 & 3 Recessed-Mounted Contacts
High Security Magnetic Contacts
Wireless Magnetic Contacts
18
20
21
22
2.6 IR Perimeter Barrier
23
Outdoor IR Perimeter Barrier23
Accesories and Options
25
Outdoor IR Barrier Columns
26
Accesories and Options
26
Outdoor Microwave Barriers
26
2
TEL. +34 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
2016 general sales terms
1. Prices are subject to change without notice.
2. Prices are in Euros. F.O.B. EMACS®, SPAIN Distribution Center, EEC Import Tax excluded.
3. All card orders are final. For details on changes or cancellations, please consult EMACS®.
a. Any changes required after order accepted by EMACS® will involve an extension of the
deadline and possibly a change in price, which will be determined by our relevant department.
b. While the order is not definitively confirmed, the time indicated by EMACS® until then always
will be an approximation.
4. The stipulated period of delivery will be automatically extended in time to be determined by our
relevant department, if two things happen:
a. Introduction of amendments to the original order, at the request of the CUSTOMER while it is
running.
b. Delayed essential documentation, specifications, designs or clarifications requested by
EMACS®, to the implementation of the supply order.
5. The delivery period will be extended also in cases of irregular situations that modify the conditions
of production, such as:
a. Lack of material caused by the failure of our suppliers or by the absence in the domestic
market of materials whose acquisition was planned in that market.
b. Service disruption of transport, strikes, and other social or labour unrest, military
demonstrations, wars, disasters, unusual weather causes, fires in our facilities, serious
accidents indispensable machines in production order, unexpected power interruption for
long periods restrictions, or opposition from the authorities.
6. During the execution of the order could be introduced any changes in the design of materials,
only if this does not prejudice the quality levels of our supplies and resulting diminished assumed
no guarantees for this reason.
7. Each and every one of the documents or studies of any kind as sketches, designs, reports,
calculations, specifications and similar reports, supplied or shipped to the CUSTOMER are
always the exclusive property of EMACS® and, in any case, may be used or disclosed to third
parties, without our prior written consent; giving rise to the obligation to compensate the nonfulfilment of the above.
8. In the price of materials is not included any expenses incurred by the manufacturing inspection
and receiving materials to be made by the CUSTOMER or by a representative, unless specific
clause; then the inspection or review must be clearly specified.
9. When, for whatever reason, the client must send goods to EMACS®, will always do after obtaining
an approval of a RMA (Return Number). You can contact us at (+34) 913 750 136 or by the email
info@emacs.es.
10. When is received an RMA email approval, make the shipping, the procedure will be:
a. Indicate clearly the RMA number in the outer packaging, which protects the computer’s
original packaging for a safe shipment.
b. Make the shipment prepaid to the address provided in the RMA of EMACS ®, may be some
of our offices, or at the manufacturer itself, whose address is listed correctly.
3
TEL. +34 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
c. Wait for the technical review of the product and the resolution of the technicians.
11.The product will be returned repaired and prepaid if it is under warranty and it applies, will be
changed if necessary in the case that it has been purchased within five days or a repair estimate
shall be sent for approval by the client in the rest of the cases.
12. Change of a defective new product:
a. If within five working days of the delivery of the material, manufacturing defects are detected,
an RMA request indicating the reason for the return then must be performed to proceed with
the replacement.
b. This request shall be sent immediately so that it can count as defective material and thus
expedite the change.
c. In case of acceptance of a return, EMACS® will replace the defective product with another of
the same model.
d. In the case of negotiate the payment of the product with the commercial department,
EMACS® will paid in the account of the customer the amount paid by it for future purchases.
e. In the case that in the customer credit there are other charges, the payment of the defective
product may be used at the will of EMACS® to cancel all or part of the pending credit amount.
13. The equipment will be returned with all its components, manuals and original packaging in perfect
condition.
14. The RMA must be sent prepaid and in the case of defective products out of warranty, the cost of
shipping and return is always borne by the customer.
15.In no case will anticipate the shipping of any product to the customer to replace another subject
to RMA before the receipt in EMACS® the allegedly defective equipment and once it has been
reviewed and verified as defective and as it enters in the terms and conditions provided for this
purpose.
16.Returns to repair a defective product: No change or bonus of defective material is accepted
after this period of 5 working days from delivery of the order, time after which govern the normal
warranty, shall also be requested the RMA prior to the shipping of the product.
17.The validity of the RMA number is fifteen calendar days from the date of issue, after this time no
refund for revocation of the RMA will be accepted.
18. EMACS® reserves the right to refuse a return material for not complying with the above conditions.
19.EMACS® warranty covers manufacturing defects for a period of 2 years from the date of sale
except for: Batteries, Hard Drives, CDRW/DVDRW Units, monitors and INTRUSION (ALARMS)
products that takes on the manufacturer’s warranty and which own conditions and manufacturer’s
certificate are included.
20. EMACS® warranty does not include wear parts or damage caused by overloading, storms or
misuse or abuse of the equipment.
21.EMACS® repair or replace products on warranty at no cost for parts and labor if found to the
material is defective and the use, the shipping and the storage of the equipment have been
suitable.
22.It is up to the Department of Quality of EMACS® to determine if a product under warranty must
2016 general sales terms
be repaired or replaced, within the established deadlines.
23.EMACS® is not responsible in any way for the consequences or accidental failures that are due
to a failure or negligence.
24. EMACS® will have no liability for any personal injury, damage to property or any other loss based
on claims that the product has failed technically or in the task for which it has been manufactured.
25.The uses of personnel outside our services to carry out work of modifications or repairs of our
products, during the warranty period, immediately void the warranty.
26. All and any irregularities within the guarantee must be communicated in writing immediately, with
urgent character and accompanied by information with the reasons which caused the failure,
under the penalty of cancellation of that.
27. The products or components delivered to the service center for repair will generate starting from
three months an amount of 2.00 € in concept of storage per day, passing to be EMACS® property
at 6 months of deposit.
a. Costs for review (workshop technician time): 73.47 € / h + VAT.
28. In the case that reimbursement of the purchase amount, whole or partial is required, EMACS®
will make a a transfer to the IBAN confirmed (bank certificate will be required) by the customer.
29. In the case that the presence of technical staff of EMACS® is required in the customer premises,
he will assume the costs of travel, accommodation and maintenance of the technical staff. They
will bill the hours spent, with a maximum of 8 hours per working day. The service will be billed
according to the current service fee.
30. All material left on deposit by the customer will be billed if 30 days have elapsed since the deposit
is made, and has not been returned to our warehouse. They will also be billed when the material
is not returned in perfect condition, including the preservation of its packaging.
31.Repair or modification or replacement of parts during the warranty period does not involve the
extension of the term thereof.
32. Parts replaced within the warranty period shall be in possession or under possession of EMACS®.
33. All trademarks and registered trademarks are the properties of their respective companies.
4
TEL. +34 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
2.0
5
DETECTION DEVICES
Intrusion Sensors for Alarm Main Boards & Control Panels
DETECTION DEVICES CATALOG 2016 · VERSION 1.0.0 · EFECTIVE PRICES SINCE FEBRUARY 2ND, 2015
2.1
Passive Infrared (PIR) Motion Detectors
Wired and Wireless Grade 2 & 3 PIR Motion Detectors
Wired Passive Infrared (PIR) Motion Detectors with Grade 2 and 3
6
P/N
Model
Description
List Price
IS215TCE
HONEYWELL™
IS215TCE Motion
Detector
The IS215TCE is an entry level passive infrared motion sensor ideal sensor for residential and light commercial applications.
This sensor is designed to fully comply with EN50131-1 and TS50131-2-2 Grade 2, Class II. Compact size. Look-down zone.
Power requirements : 8,5~15,4V DC, 16mA @ 12VDC. Tamper switch. Dimensions: 86x60x38mm (h x w x d). Range: 12m x 12
m. Dual-slope temperature compensation. EN50131-1 Security Grade 2, Environmental Class II. PD6662 grade 2.
16,50 €
IS3012
HONEYWELL™
IS3012 Motion
Detector
23,00 €
IS3016
HONEYWELL™
IS3016 Motion
Detector
IS3016A
HONEYWELL™
IS3016A Motion
Detector
Designed with the installer in mind, these high performance small form factor motion detectors offer a trouble-free, out of the box
experience to simplify the install process and reduce install time. With the passive infrared IS3012, optimum performance is achieved
using custom developed extended range Fresnel optics, look down, cover and wall tamper, and selectable pet immunity. Leading
edge sensing technologies and a wide range of models to suit the requirements of most applications, Honeywell’s family of IS3000 and
DT8000 motion detectors will maximize intruder detection while diminishing false alarms. Sleek, Sturdy Housing. Sealed Optics and
Electronics. Pet-friendly Selectivity. Integrated Screw Retention Features. Uniform Sensitivity Optics. Wall-to-Wall Coverage. Superior
Detection and False Alarm Immunity. Selectable Look Down. PIR White Light Immunity. Flashlight Walk Test. Flexible Mountings.
Designed with the installer in mind, these high performance small form factor motion detectors offer a trouble-free, out of the box
experience to simplify the install process and reduce install time. With the passive infrared IS3016, optimum performance is achieved
using custom developed extended range Fresnel optics, look down, cover and wall tamper, and built-in EOL resistors. Leading edge
sensing technologies and a wide range of models to suit the requirements of most applications, Honeywell’s family of IS3000 motion
detectors will maximize intruder detection while diminishing false alarms. Sleek, Sturdy Housing. Sealed Optics and Electronics. Builtin EOL resistors. Integrated Screw Retention Features. Uniform Sensitivity Optics. Wall-to-Wall Coverage. Superior Detection and
False Alarm Immunity. Selectable Look Down. PIR White Light Immunity. Flashlight Walk Test. Flexible Mountings.
Designed with the installer in mind, these high performance small form factor motion detectors offer a trouble-free, out of the box
experience to simplify the install process and reduce install time. With the passive infrared IS3016, optimum performance is achieved
using custom developed extended range Fresnel optics, look down, cover and wall tamper, and built-in EOL resistors. Leading edge
sensing technologies and a wide range of models to suit the requirements of most applications, Honeywell’s family of IS3000 motion
detectors will maximize intruder detection while diminishing false alarms. Sleek, Sturdy Housing. Sealed Optics and Electronics. Builtin EOL resistors. Integrated Screw Retention Features. Uniform Sensitivity Optics. Wall-to-Wall Coverage. Superior Detection and
False Alarm Immunity. Selectable Look Down. PIR White Light Immunity. Flashlight Walk Test. Flexible Mountings.
033430.01
HONEYWELL™
Viewguard PIR
Motion Detector
The Viewguard PIR detectors are motion detectors using passive infrared technology. To ensure optimum detection, detectors are equipped
with high-quality mirror optics. Standard equipment includes a mirror area for optics. If required, the detectors can be retro-fitted to longrange or curtain optics with accessories that are available separately. The detectors are suitable for intruder alarm panels with conventional
technology and are available with or without Anit-Mask function (monitoring against covering). Range: 15m x 15m (Selectable to 15, 13, 11 &
8m). Micro processor controlled. Current 6.6 mA @ 12VDC. Infrared light guide antimasking. Memory. Operating temperature: -10°C to 55°C.
Tamper switch. Dimensions (h x w x d): 158 x 64 x 48mm. EN50131-1 Security Grade 3, Environmental Class II.
61,00 €
IS2500SN-EU
HONEYWELL™
IS2500SN-EU
Motion Detector
V-Plex is the patented polling loop technology that literally defines price and performance on a simple pair of wires. By
utilizing two wires instead of four, V-Plex offers significant advantages over home run wiring or the conventional four-wire
multiplex providing economical expansion of peripheral devices and point identification to your central monitoring station.
Detection range 15m x 18m. Adjustable pet immunity. Digital signal processing. Zone input for SMB-10T tamper contact.
Front and back tamper.
67,00 €
IS2560T
HONEYWELL™
IS2560T Motion
Detector
18 x 26 m (60’x85’) Wide Area PIR. IS2560 is designed to meet false alarm standards including SIA, the new EN50131-1
and TS50131-2-2 standards. Microprocessor control helps filter out real signals from false sources. Our patented Black
bug guard improves falses due to bright lights. 50' x 50' (15m x 15m) coverage pattern, Horizontal and vertical pattern
adjustment, Alternate polarity pulse count, SMD constructions, EZ-Mount features for fast trouble free installation, Automatic
temperature compensation, White light filter, High RFI immunity, Custom designed Fresnel lenses help detect intruders at the
edge of the protected area as easily as an intruder is directly in front of the sensor.
23,00 €
IS25100TC
HONEYWELL™
IS25100TC
Motion Detector
Range: 30 x 6m (25 x 5 m) in TS50131-2-2 and T014 installations. Grade 2, Class II. Includes remote LED enable and an alarm memory. Easy
installation: 45° terminal blocks, EOL terminals. Automatic walktest. Selectable sensitivity: 4 settings to adapt to the environment. Flexible mountings:
wall and corner mount breakout holes available; or use the SMB10 bracket range (swivel, ceiling, tampered). False alarm immunity: designed to meet
tough false alarm standards. A microprocessor helps to separate false alarms from real alarms. Advanced Dual slope temperature compensation.
Sabotage-resistant lens design. Patented look-down mirror provides optimum detection directly beneath the sensor. Tamper switch. White Light
Immunity of minimum 6500 Lux reduces the chance of false activation. Bug guard which reduces the chance of false activation. Silent relay.
30,00 €
6 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
24,50 €
45,00 €
2.1
Passive Infrared (PIR) Motion Detectors
Wired and Wireless Grade 2 & 3 PIR Motion Detectors
Wired Passive Infrared (PIR) Motion Detectors with Grade 2 and 3
P/N
Model
Description
List Price
IS2535T
HONEYWELL™
IS2535T Motion
Detector
Range: 11 x 12m. Grade 2, Class II. Selectable Pet immunity: 0, 18 or 36 Kg. Easy installation: 45° terminal blocks, EOL terminals.
Automatic walktest. Selectable sensitivity: 4 settings to adapt to the environment. Flexible mountings: wall and corner mount
breakout holes available. Or use the SMB10 bracket range (swivel, ceiling, tampered). False alarm immunity: designed to meet
tough false alarm standards. A microprocessor helps to separate false alarms from real alarms. Advanced Dual slope temperature
compensation. Large wiring channel on back to allow surface wiring. Sabotage-resistant lens design. Patented look-down mirror
provides optimum detection directly beneath the sensor. Tamper switch: Is activated before access is possible. White Light Immunity
of minimum 6500 Lux reduces the chance of false activation. Bug guard which reduces the chance of false activation. Silent relay.
23,00 €
RK2000
DPC0000B
RISCO™
LuNAR™ PIR
RK2000DPC
Celing Mount
Detector
The LuNAR PIR is a digital ceiling mount detector with a slim housing, designed with state-of-the-art components to ensure
reliable operation in a wide range of applications. The LuNAR PIR employs a dual element PIR sensor with digital true
temperature compensation, while a wide angle 110º Fresnel lens provides 360º coverage. 360° low profile ceiling mount PIR.
Coverage 12m (40’) diameter. Digital Detector with True Temperature Compensation. Built-in Double EOL resistors, jumper
selectable. Cost-effective.
36,00 €
Accesories and Options
P/N
Description
List Price
SMB10
Pack (5) Universal White Swivel Mount Bracket for MC, IS y DT7xxx
5,00 €
SMB10C
Pack (5) Universal White Swivel Mount Bracket for IS y DT7xxx (ceiling mount).
5,00 €
Wireless Passive Infrared (PIR) Motion Detectors
7
P/N
Model
Description
List Price
IR8M
HONEYWELL™
IR8M Motion
Detector
Passive infrared sensor with pet-immunity. Selectable immunity for animals weighing up to 36Kg, compliance to TS EN50131-2-2
Grade 2, Class II. Dual Protocol for compatibility with Galaxy Dimension and G2 systems, Le Sucre™ and Domonial systems. 11M x
12M detection range. Selectable Pet Immunity (0, 18 or 36Kg). Patented Look-down Mirror. Front & Rear Tampers. Dual Protocol for
compatibility with Galaxy Dimension and G2 systems and Domonial systems. Battery Life: >4.5 yrs Domonial, >3 yrs Galaxy. 10 minute
Auto test with active LED. Advanced Dual Slope Temperature Compensation. Selectable Pulse Count and Sensitivity. Bi-Directional RF
communications. Stylish and practical housing design. Operating Temperature -10° C to 55° C. Dimensions (h x w x d): 112 x 60 x 40mm.
80,00 €
0-101185
VISONIC™ Next
PG2 Motion
Detector
Two-way wireless digital PIR detector. Range: 15m (50ft) 90º multiple-curtain coverage with "wall" creep zone. Longer battery life (6 years in typical
use). Visible signal quality indication shown on the device. Enhanced false alarm immunity by combined Fresnel and cylindrical optics. PowerG
two-way Frequency Hopping Spread Spectrum FHSS-TDMA technology. Employs the proven AES-128 (128 bit key) advanced encryption algorithm
for correct message identification and for protecting the alarm system from code grabbing other attackers. Continuously measures communication
quality and automatically sets transmission power to the minimum required for reliable communication. Configured from the panel – no hardware
switches and no need to re-open the detector once closed. Visible and transmitted low battery indication. Fast and easy adjustment-free installation.
77,00 €
0-101802
VISONIC™
Pet-Tolerant
Next K-9 85 PG2
Motion Detector
15m (50ft) 90º multiple-curtain coverage with "wall" creep zone. Longer battery life (6 years in typical use). Visible signal quality indication shown on the
device. Enhanced false alarm immunity by combined Fresnel and cylindrical optics. PowerG two-way Frequency Hopping Spread Spectrum FHSS-TDMA
technology - provides robustness and reliability closer than ever to wired systems. Employs the proven AES-128 (128 bit key) advanced encryption algorithm
for correct message identification and for protecting the alarm system from code grabbing other attackers. Continuously measures communication quality
and automatically sets transmission power to the minimum required for reliable communication. Configured from the panel – no hardware switches and no
need to re-open the detector once closed. Visible and transmitted low battery indication. Fast and easy adjustment-free installation.
81,00 €
7 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.1
Passive Infrared (PIR) Motion Detectors
Wired and Wireless Grade 2 & 3 PIR Motion Detectors
Long Range Passive Infrared (PIR) Motion Detectors
8
P/N
Model
Description
List Price
201312
ADPRO™ PIR
PRO-45 Long
Range Motion
Detector
361,00 €
201313
ADPRO™ PIR
PRO-18W Long
Range Motion
Detector
201738
ADPRO™ PIR
PRO-100H Long
Range Motion
Detector (Curtain)
201886
ADPRO™ PIR
PRO-18H Long
Range Motion
Detector
Standard medium-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface
for a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Vandalism detection (housing and mounting
position). Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Detector window: PE-foil.
Mounting height: 4m (nominal). IP-Protection: IP54. Operating Temperature: -20°C - +60°C. Operating Voltage: 10.5 - 30 VDC
/ 24 VAC ±15%. Current Consumption: ca. 18mA @ 12VDC. Range: 50m (nominal). Width: 3.3m (nominal). Creep Zone: 1m.
Integrated RS-485-Interface.
Standard medium-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface
for a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Vandalism detection (housing and mounting
position). Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Detector window: PE-foil.
Mounting height: 4m (nominal). IP-Protection: IP54. Operating Temperature: -40°C - +60°C. Operating Voltage: 10.5 - 30 VDC
/ 24 VAC ±15%. Current Consumption: ca. 18mA @ 12VDC. Range: 21m (nominal). Width: 24m (nominal). Creep Zone: 1m.
Integrated RS-485-Interface.
Standard medium-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface
for a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for short, medium and long range detection area via RS-485 protocol.
Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Silicon wafer window. Mounting height:
4m (nominal). IP-Protection: IP54. Operating Temperature: -40°C - +60°C. Operating Voltage: 10.5 - 30 VDC / 24 VAC ±15%.
Current Consumption: ca. 18mA @ 12VDC. Range: 150m (nominal). Width: 3.3m (nominal). Creep Zone: 8m. Integrated RS-485Interface.
Standard long-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface
for a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology
and adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Range and sensitivity adjustments
programmable (RS-485)/selectable (DIP-switches). Silicon wafer window. Mounting height: 4m (nominal). IP-Protection: IP54.
Operating Temperature: -40°C - +60°C. Operating Voltage: 10.5 - 30 VDC / 24 VAC ±15%. Current Consumption: ca. 18mA @
12VDC. Range: 30m (nominal). Width: 27m (nominal). Creep Zone: 1m. Integrated RS-485-Interface.
202405
ADPRO™ PIR
PRO-250H Long
Range Motion
Detector (Curtain)
1.550,00 €
202484
ADPRO™ PIR
PRO-45Z Long
Range Motion
Detector
225100
ADPRO™ PIR
PRO-100 Long
Range Motion
Detector
CH10023001
ADPRO™ PIR
PRO-45 Long
Range Motion
Detector
The ADPRO PRO series of passive infrared (PIR) detectors detect moving targets by sensing temperature differences
between them and the stationary background. Nominal range (LxW), width at nominal range (*): 150 m x 3.6 m (500 ft x 12 ft).
IP54. Dimensions: 275 mm x 100 mm x 100 mm (10.8” x 3.94” x 3.94”). Data port: RS 485, 9.6 KBps, 8E1. Tamper detection:
Cover switch 30 V, 100 mA max detection of changes in alignment. The lowest nuisance alarm rates. Remote access for
configuration and management (via databus). Unique anti-vandal feature to detect changes in detectors alignment. 4 meter
(13 ft) mounting height for minimal risk of vandalism. Wide power supply range 10.5 to 30 V DC or 24 V AC (auto-sensing).
Low installation and maintenance cost. Integration with FastTrace 2/2E Remotely Managed Multi-service Gateway (RMG).
Standard medium-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface
for a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Vandalism detection (housing and mounting
position). Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Detector window: PE-foil.
Mounting height: 4m (nominal). IP-Protection: IP54. Operating Temperature: -20°C - +60°C. Operating Voltage: 10.5 - 30 VDC
/ 24 VAC ±15%. Current Consumption: ca. 18mA @ 12VDC. Range: 50m (nominal). Width: 3.3m (nominal). Creep Zone: 0m.
Integrated RS-485-Interface.
Standard long-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface for
a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Vandalism detection (housing and mounting
position). Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Detector window: PE-foil.
Mounting height: 4m (nominal). IP-Protection: IP54. Operating Temperature: -40°C - +60°C. Operating Voltage: 10.5 - 30 VDC
/ 24 VAC ±15%. Current Consumption: ca. 18mA @ 12VDC. Range: 127 m (nominal). Width: 2.7 m (nominal). Creep Zone: 8m.
Integrated RS-485-Interface.
Standard long-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface for
a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Vandalism detection (housing and mounting
position). Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Detector window: PE-foil.
Mounting height: 4m (nominal). IP-Protection: IP54. Operating Temperature: -40°C - +60°C. Operating Voltage: 10.5 - 30 VDC
/ 24 VAC ±15%. Current Consumption: ca. 18mA @ 12VDC. Range: 60 m (nominal). Width: 3.9 m (nominal). Creep Zone: 8m.
Integrated RS-485-Interface.
8 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
361,00 €
833,00 €
548,00 €
449,00 €
646,00 €
400,00 €
2.1
Passive Infrared (PIR) Motion Detectors
Wired and Wireless Grade 2 & 3 PIR Motion Detectors
Long Range Passive Infrared (PIR) Motion Detectors
P/N
Model
Description
List Price
CH10023101
ADPRO™ PIR
PRO-45H Long
Range Motion
Detector
610,00 €
CH10080101
ADPRO™ PIR
PRO-51 Long
Range Motion
Detector
Standard long-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface for
a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Vandalism detection (housing and mounting
position). Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Detector window: PE-foil.
Mounting height: 4m (nominal). IP-Protection: IP54. Operating Temperature: -40°C - +60°C. Operating Voltage: 10.5 - 30 VDC
/ 24 VAC ±15%. Current Consumption: ca. 18mA @ 12VDC. Range: 60 m (nominal). Width: 3.9 m (nominal). Creep Zone: 8m.
Integrated RS-485-Interface.
Standard long-range curtain outdoor detector, with wall mount metal bracket and integrated Remote-Service interface for
a sophisticated detector setup or detector monitoring. Minimum nuisance alarms due to the latest DSP-technology and
adaptive circuitry of detection. Seperate alarm outputs for alarm and tamper. Vandalism detection (housing and mounting
position). Range and sensitivity adjustments programmable (RS-485)/selectable (DIP-switches). Detector window: PE-foil.
Mounting height: 4m (nominal). IP-Protection: IP54. Operating Temperature: -40°C - +60°C. Operating Voltage: 10.5 - 30 VDC
/ 24 VAC ±15%. Current Consumption: ca. 18mA @ 12VDC. Range: 50 m (nominal). Width: 22 m (nominal). Creep Zone: 8m.
Integrated RS-485-Interface.
764,00 €
Accesories and Options
P/N
Description
List Price
201753
Pole mount bracket for all models except PRO-250.
56,00 €
220103-A
Mount bracket with clam for all outdoor PIR models.
189,00 €
CH19000301
Interface module / SW for PC communications using PRO-18, 45, 85, 100 series.
474,00 €
Outdoor Passive Infrared (PIR) Motion Detectors
P/N
9
Model
Description
List Price
0-102786
Volumétrico
Exterior
VISONIC™ Vía
Radio TOWER20AM PG2
TOWER-20AM PG2, an innovative wireless outdoor PIR mirror detector, comprehensively addresses property owners’ security needs for accurate
intruder detection with minimum false alarms. Superior outdoor detection with virtually no false alarms. Innovative Octa-Quad™ technology can
distinguish between a moving person, swaying trees and bushes, and a small animal, minimizing false alarms while ensuring effective detection
of real threats. PowerG, two-way, Frequency Hopping Spread Spectrum (FHSS-TDMA) technology - Provides robustness and reliability closer
than ever to wired systems. Prolonged battery life (3 years in typical use). Vandal-resistant design – Enabled by patented V-Slot® technology.
Unprecedented, complete anti-masking protection. Market-leading black mirror optics – Provide exceptionally high immunity to false alarms from
sunlight and car headlights. Configured from the panel – No hardware switches and no need to re-open the detector once closed.
243,00 €
AFQ-0002
TEXECOM™
Premier TD
Outdoor Motion
Detector
Twin-dual PIR element outdoor motion detector with non-overlapping mirrored optics. Dual, Over-Lapping, Digital PIR.
Adjustable optics and adjustable sensitivity. Digital temperature compensation. IP65 sealed enclosure. Day/night mode
and high white light immunity. Quick and simple to install. Mounting Height: 1.0-1.4m, 1.2m nominal. Dimensions: 250mm x
86.5mm x 87mm.
87,00 €
RK312PR0000B
RISCO™
WatchOUT DUALPIR 12M Outdoor
Motion Detector
WatchOUT™ PIR has been redesigned to provide better than ever false alarm immunity using two PIR channels with two
separate detection areas. Wide angle coverage: 12m (40ft) 90°. RISCO Group Addressable Bus Detector. Detection method:
Two PIR channels with separate detection areas and adjustable PIR. Mounting height: 0.8m to 1.2m (2’7” to 3’11”). Pet
friendly: 45kg (100lb). Operating voltage : 9-16 VDC. Alarm contact: NC, 100mA, 24 VDC. Tamper contact: NC. 100mA, 24
VDC. Environmental rating: IP 65. Operating temperature” -30°C to 60°C (-22°F to 140°F). Dimensions: 230 x 121 x 123mm
(9” x 4.76” x 4.85”).
115,00 €
9 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.1
Passive Infrared (PIR) Motion Detectors
Wired and Wireless Grade 2 & 3 PIR Motion Detectors
Outdoor Passive Infrared (PIR) Motion Detectors
10
P/N
Model
Description
List Price
GJD300
GJD™ D-TECT 2
Outdoor Motion
Detector
The D-TECT 2 is a BS8418 compliant, quad element PIR external movement detector, which can be used to control cameras,
connect to alarm panels and communicate with GJD’s lighting control systems. The detector’s quad PIR sensing module
is equipped with two volt free and two negative switched outputs with a programmable beam range of up to 30m, avoiding
boundary overspill and offering truly exceptional resistance to false alarms.
262,00 €
GJD350
GJD™ D-TECT
50 Outdoor
Motion Detector
The D-TECT 50, BS 8418 compliant movement detectors combine advanced signal processing and unique optical systems,
which allow for the beam range to be programmed from 25 to 50 metres, avoiding boundary overspill, making it particularly
effective for perimeter detection.
380,00 €
10 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.2
Dual Tech (DT) Motion Detector
Wired and Wireless Grade 2 & 3 Infrared and Microwave Motion Detectors
Dual Tech (DT) Motion Detector with Grade 2 & 3
11
P/N
Model
Description
DT8016AF4
HONEYWELL™
DT8016AF4
Motion Detector
Designed for mid to high-end commercial environments where a Grade 3 system may be required, the DT8016AF4 antimask motion sensor delivers reliable protection with improved false alarm immunity through patented solutions. It includes
DualCore™ signal processing which is ideal for areas that are difficult to protect with standard products and integrates
a total of five patented solutions to improve reliability and installation. In addition to this, the installer will benefit from the
design of the sensor which allows easy access to the connectors with its quick plug-in feature. Furthermore this motion
sensor offers integrated EOL resistors and enhanced walk test feature saving time on installation. Optimum performance is
achieved using X-Band microwave technology and Uniform Sensitivity Optics. Range 16 x 22 m.
54,00 €
DT8012F4
HONEYWELL™
DT8012F4
Motion Detector
Designed with the installer in mind, these high performance small form factor motion detectors offer a trouble-free, out of the
box experience to simplify the install process and reduce install time. With the DUAL TEC DT8012F4, optimum performance
is achieved using custom developed extended range Fresnel optics, look down, cover and wall tamper, and selectable pet
immunity. Leading edge sensing technologies and a wide range of models to suit the requirements of most applications,
Honeywell’s family of DT8000 motion detectors will maximize intruder detection while diminishing false alarms.
35,00 €
DT8016F4
HONEYWELL™
DT8016F4
Motion Detector
Designed with the installer in mind, these high performance small form factor motion detectors offer a trouble-free, out of the
box experience to simplify the install process and reduce install time. With the DUAL TEC DT8016F4, optimum performance
is achieved using custom developed extended range Fresnel optics, look down, cover and wall tamper, and selectable pet
immunity. Leading edge sensing technologies and a wide range of models to suit the requirements of most applications,
Honeywell’s family of DT8000 motion detectors will maximize intruder detection while diminishing false alarms.
44,50 €
DT8016MF4
HONEYWELL™
DT8016MF4
Motion Detector
52,00 €
33450
HONEYWELL™
DUAL Viewguard
Motion Detector
Designed for mid to high-end commercial environments where a Grade 3 system may be required, the new Honeywell
DT8016MF4 anti-mask motion sensor delivers reliable protection with improved false alarm immunity through patented
solutions. It includes DualCore™ signal processing which is ideal for areas that are difficult to protect with standard products
and integrates a total of five patented solutions to improve reliability and installation. In addition to this, the installer will
benefit from the design of the sensor which allows easy access to the connectors with its quick plug-in feature. Furthermore
this motion sensor offers integrated EOL resistors and enhanced walk test feature saving time on installation. Optimum
performance is achieved using X-Band microwave technology and Uniform Sensitivity Optics.
The Viewguard DUAL motion detectors comprise two independent sensor systems: a passive infrared detector and a
microwave sensor. The functioning principle of the detector is based on an intelligent coupling of the two sensor systems.
This coupling renders the detectors particularly insensitive to air and thermal turbulences. Viewguard’s distinguishing features
are optimum alarm detection and extremely high false alarm security. To ensure optimum detection, detectors are equipped
with high-quality mirror optics (area optics). The detectors are suitable for intruder alarm panels with conventional connection
technology and are available with or without Anti-Mask function (monitoring against covering). Range 8-15 m.
DT7500SN-EU
HONEYWELL™
DT7500SN-EU
Motion Detector
Designed to be used with Honeywell control panels that support V-Plex serial number polling loop devices, Honeywell’s
DT7500SN-EU is a versatile, feature-rich DUAL TEC motion sensor that saves installers time and money on installations.
Automatic walk test saves installers a trip to disable the LED on each unit. Patented K-Band technology is less likely to go
through walls and makes set-up and installation simple. Additional benefits include 45° terminal blocks for easy installation, a
quicker warm-up time and a panel-initiated walk-test.
77,00 €
DT7235TCE
HONEYWELL™
DT7235TCE
Motion Detector
The DT7235T DUAL TEC® Motion Sensor provides reliable protection with pet immunity for up to 100 lbs. in a simple
installation configuration that requires no adjustments. Optimum performance is achieved using K-Band microwave
technology and Uniform Sensitivity Optics. Range 11 x 11 m. Grade 2.
37,00 €
DT7435-EU
HONEYWELL™
DT7435-EU
Motion Detector
The fully-featured DUAL TEC® DT7435-EU motion sensor achieves reliable protection (with pet immunity for up to 18 kg)
and improved false alarm immunity through DualCore™ signal processing. K-Band microwave technology and Uniform
Sensitivity Optics ensure optimum performance. Range 11 x 11 m. Grade 2.
52,00 €
11 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
List Price
87,00 €
2.2
Dual Tech (DT) Motion Detector
Wired and Wireless Grade 2 & 3 Infrared and Microwave Motion Detectors
Dual Tech (DT) Motion Detector with Grade 2 & 3
12
P/N
Model
Description
List Price
DT7450-EU
HONEYWELL™
DT7450-EU
Motion Detector
Detector DT. Alcance 15 x 18 m(abanico). Banda K. Diseñados para aplicaciones comerciales de alto riesgo y ofrecen una
protección fiable gracias a la inmunidad a las falsas alarmas mejorada mediante el procesamiento de señal de doble núcleo
“DualCore™”. La tecnología microondas en Banda K y la óptica de sensibilidad uniforme con que están dotados garantizan
un rendimiento óptimo.
48,00 €
DT900-SP
HONEYWELL™
DT900-SP Long
Range Motion
Detector
The use of two technologies—microwave and PIR—and features like anti-masking, vandal-resistant housing, large coverage
patterns and three microcontroller-based sensitivity modes, make the powerful DT900 DUAL TEC sensors ideal for the
harshest commercial and industrial environments. Range 15 x 18 m. Grade 3.
185,00 €
DT906/0-SP
HONEYWELL™
DT906/0-SP
Long Range
Motion Detector
The use of two technologies —microwave and PIR— and features like anti-masking, vandal-resistant housing, large coverage
patterns and three microcontroller-based sensitivity modes, make the powerful DT900 DUAL TEC sensors ideal for the
harshest commercial and industrial environments. Range 37 m x 3 m - 61 m x 6 m. Size: 134 x 178 x 210 mm.
167,00 €
AFG-0002
TEXECOM™
Premier Elite DT
Motion Detector
Digital dual technology detector with interchangeable electronics module. 15/50 Detection Range (m/ft). X-band doppler.
Adjustable microwave range. Mounting Brackets (available separately). Digital Temperature Compensation. Digital Pulse
Count. Microprocessor Technology. Interchangeable PCB Module. Multiple LED Indication. PD6662:2010 Grade 2 Class II.
Range: 15 m.
40,00 €
AFH-0002
TEXECOM™
Premier Elite CW
Motion Detector
The Premier Elite CW incorporates advanced CloakWise technology. CloakWise Algorithm for enriched detection. 15m
volumetric PIR & mIcorwave range. Sealed optics. Digital tempearture compensation. Microprocessor technology.
Fluorescent light protection. 1.5 to 3m adjustable mounting height. Tamper-proof brackets with cable feed-through.
44,00 €
AFB-0048
TEXECOM™
Premier Elite
AMDT Motion
Detector
Grade 3 anti-masking digital dual technology detector. 15m Volumetric PIR & Microwave Detection. Active IR anti-masking.
Triple End-of-Line (T-EOL) signalling. Wall Tamper Detection. PD6662:2010 Grade 3 Class II.
52,00 €
RK415DT0000B
RISCO™ DigiSense Motion
Detector
DigiSense Detector Grade2. 15m coverage. Assures superior catch performance and false. Alarm immunity.
42,00 €
RK150DTGL00A
RISCO™
LuNAR™ Ceiling
Mount Motion
Detector
LuNAR DT 360 Ceiling Mount Detector. Grade 2. Anti-Cloak Technology (ACT) and Greenline feature.
76,00 €
12 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.2
Dual Tech (DT) Motion Detector
Wired and Wireless Grade 2 & 3 Infrared and Microwave Motion Detectors
Dual Tech (DT) Motion Detector with Grade 2 & 3
13
P/N
Model
Description
List Price
RK815DTGL00A
RISCO™ IWISE
Motion Detector
iWise Detector Grade2. 15m coverage. Dual MW and PIR technologies. Anti-Cloak Technology (ACT). Green Line for
disabling the MW during disarm. Active IR Anti-Mask. Cover and wall/corner tampers. Corridor and Curtain lenses (optional).
Extra relay zone input saves wring back to the panel.
58,00 €
RK825DTGL00A
RISCO™ IWISE
Long Range
Motion Detector
iWise Detector Grade2. 25m coverage. Anti-Cloak Technology (ACT) and Greenline feature.
83,00 €
RK150DTG300B
RISCO™
LuNAR™ G3
Ceiling Mount
Motion Detector
The LuNAR RK150DTG3 is the ultimate ceiling motion detector for professional installations, incorporating both Anti-Mask
and Anti-Cloak™ Technologies (ACT™). Built-in end-of-line (EOL) resistors are included to to simplify the installation. The
detector features a 110º wide-angle Fresnel lens, providing 360º coverage. 360° low profile ceiling mount Grade 3. Coverage
12m (40’) diameter. Dual technology (MW and PIR). Anti-Cloak Technology (ACT™). Green Line™ for disabling the MW during
disarm. Active IR Anti-Mask. Built-in Triple EOL resistors, jumper selectable. Cover and back tampers. Low profile design.
79,00 €
RK815DTG300B
RISCO™ IWISE
G3 Motion
Detector
iWISE Detector AM Grade3. 15m coverage. Dual MW and PIR technologies. Anti-Cloak Technology (ACT). Green Line for
disabling the MW during disarm. Active IR Anti-Mask. Cover and wall/corner tampers. Corridor and Curtain lenses (optional).
Extra relay zone input saves wring back to the panel.
81,00 €
RK825DTG300B
RISCO™ IWISE
G3 Long Range
Motion Detector
iWISE Detector AM Grade3. 25m coverage. Dual MW and PIR technologies. Anti-Cloak Technology (ACT). Green Line for
disabling the MW during disarm. Active IR Anti-Mask. Cover and wall/corner tampers. Corridor and Curtain lenses (optional).
Extra relay zone input saves wring back to the panel.
116,00 €
RK200DTG300D
RISCO™
LuNAR™
Industrial Ceiling
Mount Motion
Detector
LuNAR Industrial AM Detector, 360 Ceiling Mount Grade3. RISCO Bus detector with Anti-Cloak Technology. Up to 8.6m
mounting height. 360° by 18m diameter coverage pattern. 3 independently adjustable PIR channels for customized coverage.
RISCO Bus dramatically reduces cabling, installation equipment and labor costs, while providing benefits of remote services.
Active IR Anti-Mask on all three channels. VBuilt-in Triple EOL resistors, jumper selectable. Remote Control & Diagnostics via
PC software or a bi-directional remote control (RK200RC0000A).
209,00 €
MOUSE07
AMC™
MOUSE07
Motion Detector
Digital dual technology detector. It combines a dual element PIR with temperature compensation, and a X band microwave
section with broadcast pulse planar cavity. Thanks to its special algorithm it is able to reach a coverage of 15 m and an angle
of 90° , ensuring an outstanding immunity to false alarms. It also allows the installer to choose among different frequency
values, enabling the installation of several detectors in the same premise, without any interference. It is equipped with 2 flow
regulators with whom it is possible to set the sensitivity from 3 to 15 m.
23,00 €
13 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.2
Dual Tech (DT) Motion Detector
Wired and Wireless Grade 2 & 3 Infrared and Microwave Motion Detectors
Accesories and Options
P/N
Description
List Price
SMB10
Universal white swivel mount bracket pack (5) for MC, IS and DT7xxx series.
5,00 €
SMB10C
White swivel mount bracket pack (5) for IS and DT7xxx series (ceiling mount).
5,00 €
RA91T000000A
White swivel mount bracket pack with tamper (5 units) for IWISE motion detectors series.
4,00 €
RA910000000A
iWISE/COSMOS wall/corner swivel.
5,00 €
AFP-0007
EOL resistor for TEXECOM™ motion detector connected to GALAXY™ Dimension panels.
1,00 €
Outdoor Dual Tech (DT) Motion Detector
P/N
Model
Description
List Price
CURTAINPM
MAXIMUM™
CURTAINPM
Motion Detector
Outdoor/Indoor intrusion detector with curtain field-of-view PIR sensor + Microwave sensor + Anti-masking + Waterproof.
CURTAIN creates a super narrow protective screen of 3º (like a curtain) to secure openings and open fields against intruders.
This type of protection allows free movement of people within the protected site- without setting off an alarm. CURTAIN is
waterproof and can be installed outdoors or indoors.
105,00 €
GUARD
MAXIMUM™
GUARD Motion
Detector
Outdoor/Indoor Waterproof Anti-masking Detector. * Two PIR sensors. Microwave sensor. Waterproof and all-weather
resistant. Frontal Anti-masking, by active infrared. Anti-case-shifting, by inertial switch: Alerts when detector has been
shifted. Microprocessor controlled. Selectable PIR detection sensitivity. Adjustable Microwave detection sensitivity.
Selectable detection combination type (AND / OR). Memory latched input. Wide-angle (1100) field-of-view. Auto temperature
compensation. High level of RFI/EMI immunity. Vertical adjustment.
145,00 €
SDI-77XL2-ABC
PROTECH™
PYRAMID XL2
Motion Detector
Dual technology outdoor False-Alarm-Free Performance “volumetric” protection sensor under even the most severe
environmental conditions. Combining PROTECH’S proprietary STEREO DOPPLER MICROWAVE Technology with a dual
element Passive Infrared sensor. The independent sensor modules are “And Gated” and must activate simultaneously to
create an overall sensor alarm. The key to their success is the unique, dual-channel Stereo Doppler Microwave Detector
and its ability to ignore randomly moving objects. The capability to field adjust the distance a target must move to create an
alarm, enhances the sensor’s adaptability to most environmental situations. Range 30m.
725,00 €
RK315DT0000C
RISCO™
WATCHOUT
EXTREME
Motion Detector
WatchOUT DT Outdoor Detector with Swivel, Extreme Grade3, 15-23m. Reliable PIR detection for outdoor areas. Two
detection areas for superior stability. Adjustable wide angle coverage up to 12m. Optional 23m long-range lens. Pet friendly
up to 45Kg. Protective hood and IP65 environmental rating. Includes swivel.
215,00 €
Accesories and Options
P/N
14
Description
List Price
BRACKET OF GUARD
White swivel mount bracket for MAXIMUM™ GUARD Motion Detectors.
8,00 €
RA300B00000A
White swivel mount bracket for RK-315 (WatchOUT) Motion Detectors.
14,00 €
14 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.3
Acoustic Detectors
Wired and Wireless Glass Break Acoustic Detectors
Wired Glass Break Acoustic Detectors
P/N
Model
Description
List Price
FG1625TAS
HONEYWELL™
FlexGuard®
FG1625TAS
Glassbreak
Sensor
FlexGuard® Glassbreak sensor with selectable sensitivity. Mount anywhere, surface mount design, suitable for all glass
types. Power requirements : 6~18V DC, 12mA @ 12VDC. Tamper switch. Compatible with the FG-701 Breakglass simulator.
Dimensions (h x w x d): 98 x 62 x 21.8mm. Range: 7.6m - 360° (adjustable range up to 7.6m). CE.
38,00 €
FG1025Z
HONEYWELL™
FlexGuard®
FG1025Z
Glassbreak
Sensor
For the ultimate in false alarm immunity choose the Honeywell FG-1025Z glassbreak detector with Time-of-Arrival
processing. Range: 7.6 m - 180º.
42,00 €
RG71FM
RISCO™
ViTRON™ Plus
Glass Break
Sensor
ViTRON Plus, Acoustic Glass Break Detector Grade2, 9m. Employ a microprocessor-based sound analysis with continuous
automatic testing to enhance security and prevent false alarms.
40,00 €
Wireless Glass Break Acoustic Detectors
15
P/N
Model
FG8M
HONEYWELL™
Wireless Acoustic
Detector
Description
Honeywell’s NEW FG8M wireless acoustic glassbreak sensor is the perfect inner perimeter protection solution to address
the problem of false alarms, particularly common in environments where there is a lot of glass present, for instance Retail
sites problem. The FlexCore™ and Flexguard™ technologies offer advanced post sensing signal processing capabilities
which provide unequal false alarm immunity.
15 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
List Price
130,00 €
2.4
Vibration Sensors
Vibration & Seismic Sensors for Impacts/Shocks Detection
Vibration Sensors for Impacts/Shocks Detection
P/N
Model
Description
List Price
PC.09000.20
HONEYWELL™
Viper GLX
Shock Sensor
The Viper perimeter products offer the most extensive range and are tailored to the needs of both the installer and the end
user. First to alarm option (Viper GLX only). Integral door contact (Viper GLX with contacts only). Non gravity dependent.
Walk test facility. Remote reset. White or brown option. Patented “commando boot” base.
45,00 €
PC.09003.20
HONEYWELL™
Viper GL Shock
Sensor
Viper GLX ASIC controlled Shock Sensor, Switch selectable patented Double Knock and Remote LED reset options. Dual
sensitivity control, auto reset of relay contacts. First to alarm option (Viper GLX only). Integral door contact (Viper GLX with
contacts only). Switch selectable patented Double Knock. Remote LED reset options. Dual sensitivity control, auto reset
of relay contacts. Walk Test facility LED can be controlled remotely. 5mA quiescent. Coverage: nominally 2.5m radius.
Sensitivity individually adjustable. Dimensions (h x w x d): 85 x 25 x 23mm.
36,00 €
SD3/WH
Sensor Inercial
HONEYWELL™
SD-3
The SD3/WH is a White Surface Mounted Shock Sensor in Tampered Junction Box range of mass inertia shock sensors
which can be used either with the TRAPPER or with other separate analysers or those integrated into control panels.
Dimensions: 50 x 28 x 17mm.
15,75 €
RK600S0000B
RISCO™
ShockTec™
Shock Sensor
The ShockTec detectors have a reliable built-in calibration method that prevents over or under sensitive settings. Intelligent
Digital Signal Processing discriminates between real attacks and natural background vibrations by analysing the vibration
signal.
22,00 €
AEA-0001
TEXECOM™
IMPAQ E Shock
Sensor
The cost effective Impaq E™ from Texecom are based on the award-winning Impaq shock sensor. Simple to set-up,
with an increased dual sensitivity range and exceptionally high false alarm immunity, these stylish detectors are ideal for
use in almost any environment. The Impaq Plus has a host of additional features to further aid installation and enhance
performance.
17,00 €
AEB-0001
TEXECOM™
IMPAQ Plus
Shock Sensor
The advanced Impaq Plus™ from Texecom are based on the award-winning Impaq shock sensor. Simple to set-up, with
an increased dual sensitivity range and exceptionally high false alarm immunity, these stylish detectors are ideal for
use in almost any environment. The Impaq Plus has a host of additional features to further aid installation and enhance
performance.
20,00 €
Wired Vibration/Seismic Sensor
16
P/N
Model
Description
List Price
E20
ELMDEME™
Seismic Sensor
Designed for the protection of Safes, Filing Cabinets, Fruit Machines and any valuable article or piece of equipment that has
a ferrous metal exterior. Safe Limpets incorporate multiple detection systems to provide comprehensive protection against
attack. Piezo Vibration Detector. Integral Analyser. Thermal Sensor. Proximity Sensor. Magnetic Interference Detection.
Supply Failure Detection. Complete with ‘Keep’ for attachment to Safe. Dimensions: Mobile part: 120 x 95 x 35mm. Fixed
part: 130 x 105 x 30mm.
139,00 €
16 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.4
Vibration Sensors
Vibration & Seismic Sensors for Impacts/Shocks Detection
Wired Vibration/Seismic Sensor
P/N
Model
Description
List Price
SC100
HONEYWELL™
SC100 Seismic
Sensor
The SC100 is a universal seismic sensor which can be used to protect vaults, strong rooms, doors, fixed ATMs, safes
and other solid structures. It is the smallest Seismic sensor on the market so easier to fit when space is limited, allowing
businesses to protect items that were previously difficult to adequately protect. Size: 80 mm x 60 mm x 21 mm.
137,00 €
SC105
HONEYWELL™
SC105 Seismic
Sensor
The SC105 is a seismic sensor that is specifically designed for mini-ATM's, vending and ticket machines, which are generally
found in noisy environments such as shopping centres, supermarkets, railway & underground stations. Size: 80 mm x 60 mm
x 21 mm.
95,00 €
Accesories and Options
P/N
Description
List Price
SC110
Mountiong bracket for SC100, SC105 and SC115 seismic sensor series.
16,00 €
SC111
Day/Night mountiong bracket for SC seismic sensor series.
74,00 €
SC113
Internal test transmitter for SC seismic sensor series.
28,00 €
Wireless Vibration/Seismic Sensor
17
P/N
Model
SHK8M
HONEYWELL™
SHK8M Wireless
Seismic Sensor
SHKC8M
HONEYWELL™
SHKC8M Wireless
Seismic Sensor
Description
List Price
The NEW SHK8M wireless piezo shock sensors from Honeywell are advanced warning devices designed to protect window
and door surroundings against forced entry, detecting the intrusion before it happens. These sensors detect shock waves
with the use of Honeywell VIPER® piezo Technology, which is alerted to vibrations through the piezo sensor.
93,00 €
The NEW SHKC8M wireless piezo shock sensors from Honeywell are advanced warning devices designed to protect window
and door surroundings against forced entry, detecting the intrusion before it happens. These sensors detect shock waves
with the use of Honeywell VIPER® piezo Technology, which is alerted to vibrations through the piezo sensor.
110,00 €
17 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.5
Magnetic Contacts
Wired & Wireless Grade 2 & 3 Magnetic Contacts
Grade 2 & 3 Surface Mount Contacts
18
P/N
Model
Description
4939SN-WH
HONEYWELL™
4939SN-WH
Magnetic Contact
Contacto magnético multiplexado V-Plex montaje superficie. “Auto-programable” numero de serie. Protegido contra
humedad e impacto. Compatible control/comunicador 4140XMPT-2 y VISTA120. Certificado EN50131-2-6:2009-5 Grado 2
Clase Ambiental II.
30,00 €
943WG-WH
HONEYWELL™
943WG-WH
Magnetic Contact
Mini Magnetic Contact. Standard gap: 1" (25mm). 12" (30cm) leads. Self-adhesive or screw mount. Switch Type: Form A
(SPST) Reed. Contact Rating: 300ma @ 30VDC. Size: 17,35 x 26,16 x 6,35 mm.
6,00 €
950GY
HONEYWELL™
950GY Magnetic
Contact
Magnetic Contact. Completely hides mounting screws and terminals. Standard gap: 1-3/4" (45mm). Ideal for concealing endof-line resistor (EOL). Switch Type: Form A (SPST) Reed. Contact Rating: 100ma @ 28VDC.
13,00 €
EMPS85W
HONEYWELL™
EMPS85W
Magnetic Contact
4 wire magnetic contact including tamper loop. Surface mount, 5 screw terminals. Switch Dimensions (h x w x d): 64 x 14
x 12mm. Magnet Dimensions (h x w x d): 64 x 14 x 12mm. Gap distance 20mm. ABS plastic housing - White (EMPS85W) or
brown (EMPS85/B.01). EN50131-1 Security Grade 1, Environmental Class II housing.
4,00 €
MPS45W
HONEYWELL™
MPS45W
Magnetic Contact
Mini magnetic contact; surface mount (self-adhesive or screw); 19 mm. gap; 0.3 m. cable; white
4,00 €
940WH-A
HONEYWELL™
940WH-A
Magnetic Contact
Magnetic Contact. Miniature size perfect for homes and offices. Attractive cover keeps mounting screws and terminals
screws hidden. Standard gap: 3/4" (19mm). Complete with spacers and mounting screws. Cover hides EOL resistor. Switch
Type: Form A (SPST) Reed. Contact Rating: 100ma @ 28VDC.
7,00 €
SC517/WH/
MULTI/G2
CQR™ SC517/
WH/MULTI/G2
Magnetic Contact
Surface Contact. 4 Terminals. Microswitch tamper. Selectable end of line resistor. Can use own resistors. Available in white
or brown. Can be fitted in double pole systems. Can be used on double door configuration. Gap: 17 mm. Case size: 65 x 13,5
x 13 mm.
9,50 €
SC517/WH/
MULTI/G3
CQR™ SC517/
WH/MULTI/G3
Magnetic Contact
Surface Contact. 4 Terminals. Microswitch tamper. Selectable end of line resistor. Can use own resistors. Available in White
or Brown. Can be fitted in double pole. Can be used on double door configuration. Magnetic Detection. Gap: 10 mm. Size: 65
x 13, 5 x 13mm.
14,25 €
18 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
List Price
2.5
Magnetic Contacts
Wired & Wireless Grade 2 & 3 Magnetic Contacts
Grade 2 & 3 Surface Mount Contacts
19
P/N
Model
Description
List Price
SC570/WH
CQR™ SC570/
WH Magnetic
Contact
The SC570/WH Grade 2 contacts are suitable for a wide range of applications and can be used in Ungraded, Grade 1, Grade
2 and Grade 3 systems. These contacts are required to have a mechanical tamper and/or be potted/sealed. End of Line
(EOL). Size: 85 x 25 x 20 mm. Gap: 30 mm.
6,50 €
SC570/WH/
MD/G3
CQR™ SC570/
WH/MD/G3
Magnetic Contact
The SC570/WH/DD/G3 Grade 3 contacts are suitable for a wide range of applications and can be used in Ungraded, Grade
1, Grade 2 and Grade 3 systems. These contacts are required to have a mechanical tamper and/or be potted/sealed. End of
Line (EOL). Size: 85 x 25 x 20 mm. Gap: 10 mm.
17,50 €
EN3-LSC-GN
ELMDENE™
EN3-LSC-GN
Magnetic Contact
Plastic sufrace contact, 6 wires, resistors 1k/1k, gap 11mm, cable 1m, polarized. Surface plastic contact for use on wood or
aluminium, internal resistors, incorporating magnetic detection / immunity. Size: 93 x 5 x 25 mm.
24,00 €
EN3-LSC-YL
ELMDENE™
EN3-LSC-YL
Magnetic Contact
Aluminium sufrace contact, 6 wires, resistors 1k/1k, gap 22mm, cable 1m, polarized. Surface plastic contact for use on wood
or aluminium, internal resistors, incorporating magnetic detection / immunity. Size: 70 x 17 x 15 mm. IP67.
24,00 €
EN3-QSC-GN
ELMDENE™
EN3-QSC-GN
Magnetic Contact
Surface Contact - Grade 3 - Small - Plastic (white). Potted, 6 wire with 1m cable tail, 11mm operating gap. Integral 1k/1k
resistors. For use in FSL or DP systems, single or multiple doors. Size: 70 x 17 x 15 mm. IP67.
19,00 €
460S
COOPER™ 460S
Magnetic Contact
Aluminum magnetic contact for surface mounting. Thanks to its solid die-cast aluminum structure, it is suitable for
applications in factories, shopping malls, etc. Its long operating distance allows the use on frames of any material and with
large play. Available with wire and terminal connection (462 model). The wire connected version has a reed section that
contains a tight reed with polyurethane resin and an anti-tampering loop to reduce violation risks. The terminal connected
version is provided with tear-off protection and a printed circuit board that can house balancing resistors. Arranged to be
protected with a 10 mm diameter black PVC coated steel cable sheath (not included).
25,00 €
462M
COOPER™ 462M
Magnetic Contact
Aluminum magnetic contact for surface mounting. Thanks to its solid die-cast aluminum structure, it is suitable for
applications in factories, shopping malls, etc. Its long operating distance allows the use on frames of any material and with
large play. Available with wire and terminal connection (462 model). The wire connected version has a reed section that
contains a tight reed with polyurethane resin and an anti-tampering loop to reduce violation risks. The terminal connected
version is provided with tear-off protection and a printed circuit board that can house balancing resistors. Arranged to be
protected with a 10 mm diameter black PVC coated steel cable sheath (not included).
20,00 €
19 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.5
Magnetic Contacts
Wired & Wireless Grade 2 & 3 Magnetic Contacts
Grade 2 & 3 Recessed-Mounted Contacts
20
P/N
Model
Description
List Price
956WH-B
HONEYWELL™
956WH-B
Magnetic Contact
Recessed rolling plunger switch with leads. White colour. Contact rating of 100mA at 28VDC. Requires you to drill a 3/4” diameter hole in your door
or window frame so that you can press the plunger switch into place to complete your installation. You can wire the 956WH-B recessed rolling
plunger switch to an open zone on any alarm control panel. If you are connecting your 956WH-B to an alarm control panel, you should program the
zone as either a perimeter zone type or an entry/exit delay zone type. The perimeter zone type will trigger an alarm anytime the system is armed and
the door or window opens. With an entry/exit delay zone type, the 956WH-B will activate the programmed entry delay time as soon as the roller ball
pops out of the plunger switch. If a valid user code is not entered before the entry delay times out, an alarm will be triggered.
9,00 €
947-75WH
HONEYWELL™
947-75WH
Magnetic Contact
The Honeywell 947-75 is a 3/4” diameter steel door recessed contact designed to protect steel doors from intrusion. You will need to wire
your Recessed contact back to an open wired zone on your alarm control panel. While surface mount contacts distract from the decor
of your property, recessed contacts are hidden within your door and window frames and are therefore much less obtrusive. The 947-75
uses a much larger magnet which is able to penetrate steel doors and energize the recessed contact. The steel door recessed contact is
ideal for commercial and industrial applications. The Honeywell steel door recessed contact has an internal reed switch with a rating of
100mA at 28VDC. The magnet spacing gap of the 947-75 recessed contact is 1/2” when installed within a steel door.
10,00 €
EMPS10W
HONEYWELL™
EMPS10W
Magnetic Contact
Magnetic contact; with tamper loop; flush mount; 12 mm. gap; 0.3 m. cable; white.
3,00 €
EMPS70W
HONEYWELL™
EMPS70W
Magnetic Contact
Magnetic contact; with tamper loop; flush mount; 20 mm. gap; 0.3 m. cable; white
4,00 €
EMPS-75W
HONEYWELL™
EMPS-75W
Magnetic Contact
Magnetic contact; with tamper loop; flush mount; 20 mm. gap; 5 screw terminals; white
4,00 €
MPS9W
HONEYWELL™
MPS9W Magnetic
Contact
Recessed-Mounted Contact. Gap (+/- 10%): 1-1/4" (32 mm). Switch Dimensions: 3/8" diameter, 3/4" L (9.5 mm diameter, 19
mm L). Magnet Dimensions: 3/8" diameter, 3/4" L (9.5 mm diameter, 19 mm L).
4,00 €
951WG-WH
HONEYWELL™
951WG-WH
Magnetic Contact
3/8" Diameter Miniature Press Fit Magnetic Contact. With a 3/4" long magnet, the 951WG is ideal for casement windows,
sliding windows, and other thin frame applications. Standard gap: 1-1/4"– the largest gap of any mini 3/8" contact. 12" leads
are standard. Switch Type: Form A (SPST) Reed. Contact Rating: 300ma @ 30VDC.
6,00 €
FC508/WH/
MULTI/G2
CQR™ FC508/
WH/MULTI/G2
Magnetic Contact
Flush Quick Fit Door Contact. Screw terminal block, no junction box required. Microswitch tamper. Selectable end of line
resistor. Can use own resistors. Available in White or Brown. Can be fitted in double pole. Can be used on double door
configuration.
9,00 €
TEL. 20
+34 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
2.5
Magnetic Contacts
Wired & Wireless Grade 2 & 3 Magnetic Contacts
Grade 2 & 3 Recessed-Mounted Contacts
P/N
Model
Description
List Price
FC508/WH/
MULTI/G3
CQR™ FC508/
WH/MULTI/G3
Magnetic Contact
Flush Quick Fit Door Contact. Screw terminal block, no junction box required. Microswitch tamper. Selectable end of line
resistor. Can use own resistors. Available in White or Brown. Can be fitted in double pole. Can be used on double door
configuration. Magnetic Immunity.
14,75 €
EN3-QFC-GN
ELMDENE™
EN3-QFC-GN
Magnetic Contact
Plastic flush contact, plastic, 6 wires, resistors 1k/1k, gap 13mm, cable 1m. This MG contact is available with following EOL
resistors too: 4k7/2k2, 8k2/8k2, 4k7/4k7, 6k8/4k7, 5k6/5k6 and 2k2/2k2.
18,50 €
414CTF
COOPER™
414CTF Magnetic
Contact
Brass magnetic contact with high mechanical resistance for flush mounting on doors and windows. Reed contact with NC
output with near magnet or changeover reed contact. Wire (2 for contact - 3 for changeover contact + 2 for anti-tampering).
-25°C to +70°C. IP 65. Anti-tampering wires. 10 pcs./package.
4,00 €
High Security Magnetic Contacts
21
P/N
Model
Description
4959SN
HONEYWELL™
4959SN Magnetic
Contact
V-Plex Programmable Overhead Door Contact. Rugged aluminum housing and adjustable L bracket type magnet. Standard
gap: 2" (51mm). 24" (61cm) armored cable. Epoxy sealed for protection from moisture and impact. Programmed from VISTA
keypad. Switch Type: Form A (SPST) Reed. Contact Rating: 100ma @ 28VDC. Honeywell Exclusive: Patent polling loop
technology
58,00 €
EMPS50
HONEYWELL™
EMPS50
Magnetic Contact
4 wire magnetic contact including tamper loop. Overhead door style. Available colour: Grey. Switch Dimensions (h x w x
d): 48 x 105 x 9.5mm. Magnet Dimensions (h x w x d): 38 x 89 x 38mm. Gap distance 55mm. Die cast aluminium housing.
EN50131-1 Security Grade 2, Environmental Class II, housing.
14,00 €
968XTP
HONEYWELL™
968XTP Magnetic
Contact
The 968XTP High Security Magnetic Switch is intended to monitor the open or closed position of moveable assemblies such
as doors, windows or machinery safety barriers, where an attempt to defeat the switch is a concern. It provides maximum
security for protection of safes, vaults and other high security applications. Utilizing balanced magnetic contacts, the
968XTP is highly defeat resistant. In addition, internal circuitry provides 2400VDC of surge protection.
110,00 €
EN3-RSA-GN
ELMDENE™
EN3-RSA-GN
Magnetic Contact
6 Wire 18mm Surface Contact with 1k/1k Resistor (Green), Grade 3 - Silver. Dimensions (L X W X D): 150 X 40 X 14. Cable
Length (cm): 100. Material: Aluminium.
39,00 €
21 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
List Price
2.5
Magnetic Contacts
Wired & Wireless Grade 2 & 3 Magnetic Contacts
High Security Magnetic Contacts
P/N
Model
4SM-100
ELMDENE™ 4SM
Magnetic Contact
Description
Surface mounting contact fully encapsulated ideal for general purpose applications. Long Life Rhodium contacts. 4 wire
connection. Passive tamper. Fully encapsulated. Aluminium body. Simple installation. EN50131-2-6 Grade 2.
List Price
8,50 €
Wireless Magnetic Contacts
22
P/N
Model
DO8M
HONEYWELL™
DO8M Wireless
Magnetic
Contacts
DODT800GY-B
Description
List Price
Door/window compact magnetic contact. Compatibility: Galaxy Dimension & G2 (with RF portal), Domonial and Le Sucre™.
New “alpha” radio protocol. Power supply : 1 battery LI03V (supplied). Battery life : ~5 years. Tamper : opening and wall
mounted. Compatibility: Galaxy Dimension & G2 (with RF portal), Domonial. Dimensions (h x w x d): 100 x 22 x 23mm.
Colours: white DO8M, brown: DO800M2. EN50131-1 Security Grade 2, Environmental Class II.
50,00 €
HONEYWELL™
DODT800GY-B
Wireless Magnetic
Contacts
Door contact with auxiliary Input. Internal and External contacts work independently. Auxilliary input loop has tamper
protection loop. Front & Rear Tampers. Enclosure protection: IP:30 / IK:04. Compatibility: Galaxy G2 (with RF portal),
Domonial, VISTA (with 5882 euhs). Battery Life: >4 yrs. Operating Temperature -10° C to 55° C. Weight with Battery: 70g.
Complete with Battery. EN/TS50131-2-6, Grade 2, Environmental Class II. Dimensions (h x w x d): 120 x 35 x 26mm.
65,00 €
0-100962
VISONIC™
MC-302 PG2
Wireless Magnetic
Contacts
MC-302 PG2 is a fully supervised two-way magnetic contact transmitter, designed primarily for protecting doors and
windows. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential
and commercial environments. It is compatible with PowerMaster® burglar alarm systems. Battery type: 3V, CR-123 Lithium
battery. Weight (.including battery): 53g (1.9oz). Operating temperature 0°C to 49°C (32°F to 120°F). Operating environment:
Indoor. Dimensions: 81 x 34 x 25 mm.
53,00 €
0-102022
VISONIC™
MC-302 E PG2
Wireless Magnetic
Contacts
MC-302E PG2 is a fully supervised twoway magnetic contact transmitter designed primarily for protecting doors and
windows. This highly reliable wireless device is compatible with PowerMaster® alarm systems and is very easy to install and
operate in a wide range of residential and commercial environments.
61,00 €
0-2286-A
VISONIC™
MCT-302 Wireless
Magnetic
Contacts
The MCT-302 is a fully supervised, PowerCode magnetic contact transmitter. For UL installations, the MCT-302 is for use with the
UL listed control unit, model PowerMax+ only. The transmitter includes a built-in reed switch (that opens upon removal of a magnet
placed near it) and an auxiliary hard-wired input, programmable as either N.C. or E.O.L., for use with additional sensors - pushbuttons,
detectors, door contacts etc. An on-board DIP switch allows the installer to disable the magnetoperated reed switch if only the auxiliary
input is needed. The reed switch and the auxiliary input behave as separate transmitters, although they trigger the same RF transmitter.
Each input has a unique 24-bit PowerCode ID, selected in the factory from over 16 million possible code combinations.
36,50 €
GBC-0001
TEXECOM™
IMPAQ
CONTACT-W
Wireless Magnetic
Contacts
Each RICOCHET enabled device provides signalling routes to and from Texecom Premier Control Panels. Should wireless
connection between two devices weaken, the network will ‘self-heal’ and automatically re-route communications via
alternate RICOCHET enabled devices. With more RICOCHET enabled devices installed, the greater the reliability of the
system.
60,00 €
22 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
2.6
IR Perimeter Barrier
Infrared and/or Microwave Perimeter Barriers
Outdoor IR Perimeter Barrier
23
P/N
Model
Description
MS-12FE
TAKEX® MS12FE IR Barrier
With its 4 x 12m PIR detectors giving up to 180 degrees of effectively pet immune coverage, the MS-12FE remains the
professional choice for reliable, trouble-free outdoor motion detection. Incorporating key features such as day/night
discrimination, variable timer alarm relay, NO/NC output, pulse count and sensitivity adjustments, there really is no need
to look further. 2x Dual-Zone sensor heads can resist detection of small animals. Advanced Variable Multi-area Detection
System. Selectable NO/NC relay output with Timer Function. Day/Night Sensing. Adjustable Pulse Count & Sensitivity. 0.81.2m Mounting Height.
279,00 €
MS-12TE
TAKEX® MS12TE IR Barrier
Advanced Variable Multi-area Detection System. Selectable NO/NC relay output with Timer Function. Day/Night Sensing. Adjustable Pulse Count & Sensitivity.
0.8-1.2m Mounting Height. Angle: 90°. Detection distance: 3 to 12m. Horizontal zones: 7 zones. Downward zones: 7 zones. Coverage adjustment Horizontal: +/-90°.
Supply voltage: 12 to 30V DC (non-polarity). Current consumption: 35mA MAX. Alarm output: Dry contact relay output N.C./N.O. selectable. Contact capacity: 30V
(AC/DC), 0.5A MAX. (Resistive load). Contact operation: Detection time + off delay (2sec. -5min. approx.). Detection settings: Night (10 lux) - Day and Night. Tamper
output: Dry contact relay output N/C. Contact capacity: 30V (AC/DC), 0.5A MAX. (Resistive load). Operation LED: Red. Blinking at warming up (LED disabled).
Lighting at alarm (LED disabled). Pulse count settings: once / three times (with a switch). Sensitivity adjustment: Approx. 30% (L) - Approx. 170% (H)
184,00 €
PB100TK
TAKEX® PB100TK IR Barrier
Our Twin photoelectric beams are designed to meet the highest standards of quality and reliability for photoelectric beam
intrusion detection. Unique twin beams are synchronised to work together to reinforce range and stability in severe weather
conditions. For distances up to 100m (330ft) outdoor / 200m (660ft) indoor, the PB-100TK provides the ideal solution when
cost is a major concern. Synchronised Twin Beams for reliable detection. Double Modulated Beam type ensures unsurpassed
immunity to direct and reflected sunlight and vehicle headlights. Multi-Meter Test Points to accurately monitor alignment
voltage. Frost Resistant Cover minimises nuisance alarms in harsh weather. Automatic Gain Control for maximum stability.
210,00 €
PB200F
TAKEX® PB200F IR Barrier
The professional choice in outdoor protection, our Quad beam detectors synchronise 16 beam paths for maximum stability
in severe weather conditions, perfect for long range perimeter protection. For distances up to 200m (660ft) outdoor / 400m
(1320ft) indoor. Synchronised Quad Beams for maximum stability in severe weather conditions. Double Modulated beam for
unsurpassed immunity to direct and reflected sunlight, vehicle headlights and other light sources. Built-in view finder and
monitor jack output for easy beam alignment. 180 degree rotating optics for increased installation flexibility. Automatic Gain
Control circuit.
495,00 €
PB30TK
TAKEX® PB30TK IR Barrier
Our Twin photoelectric beams are designed to meet the highest standards of quality and reliability for photoelectric beam
intrusion detection. Unique twin beams are synchronised to work together to reinforce range and stability in severe weather
conditions. For distances up to 30m (100ft) outdoor / 60m (200ft) indoor, the PB-30TK provides the ideal solution when cost
is a major concern. Synchronised Twin Beams for reliable detection. Double Modulated Beam type ensures unsurpassed
immunity to direct and reflected sunlight and vehicle headlights. Multi-Meter Test Points to accurately monitor alignment
voltage. Frost Resistant Cover minimises nuisance alarms in harsh weather. Automatic Gain Control for maximum stability.
152,00 €
PB50FP
TAKEX® PB50FP IR Barrier
The professional choice in outdoor protection, our Quad beam detectors synchronise 16 beam paths for maximum stability
in severe weather conditions, perfect for long range perimeter protection. For distances up to 50m (165ft) outdoor / 100m
(330ft) indoor. Synchronised Quad Beams for maximum stability in severe weather conditions. Double Modulated beam for
unsurpassed immunity to direct and reflected sunlight, vehicle headlights and other light sources.. Built-in view finder and
monitor jack output for easy beam alignment. 180 degree rotating optics for increased installation flexibility. Automatic Gain
Control circuit.
405,00 €
PB-60TE
TAKEX® PB60TE IR Barrier
Our Twin photoelectric beams are designed to meet the highest standards of quality and reliability for photoelectric beam intrusion
detection. Unique twin beams are synchronised to work together to reinforce range and stability in severe weather conditions. For
distances up to 60m (200ft) outdoor / 120m (400ft) indoor. Choose from 4-Channels (selectable) for use in "stacked" or "in-line"
systems without crosstalk. Synchronised Twin Beams for reliable detection. Double Modulated Beam type ensures unsurpassed
immunity to direct and reflected sunlight and vehicle headlights. Multi-Meter Test Points to accurately monitor alignment voltage.
Frost Resistant Cover minimises nuisance alarms in harsh weather. Automatic Gain Control for maximum stability.
268,00 €
PB-60TK
TAKEX® PB60TK IR Barrier
Our Twin photoelectric beams are designed to meet the highest standards of quality and reliability for photoelectric beam intrusion
detection. Unique twin beams are synchronised to work together to reinforce range and stability in severe weather conditions. For
distances up to 60m (200ft) outdoor / 120m (400ft) indoor, the PB-60TK provides the ideal solution when cost is a major concern.
Synchronised Twin Beams for reliable detection. Double Modulated Beam type ensures unsurpassed immunity to direct and
reflected sunlight and vehicle headlights. Multi-Meter Test Points to accurately monitor alignment voltage. Frost Resistant Cover
minimises nuisance alarms in harsh weather. Automatic Gain Control for maximum stability.
160,00 €
23 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
List Price
2.6
IR Perimeter Barrier
Infrared and/or Microwave Perimeter Barriers
Outdoor IR Perimeter Barrier
24
P/N
Model
Description
List Price
PB-IN-50HF
TAKEX® PB-IN50HF IR Barrier
The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between
Transmitter and Receiver, the PB-IN-HF series offer unrivaled stability in perimeter security. Coupled with channel separation
and environmental (anti-fog) circuitry, the PB-IN-HF series has earned worldwide recognition as the standard our rivals aspire to.
For distances up to 50m (165ft) outdoor / 100m (330ft) indoor. 4 Synchronised High-Power Beams. Selectable 4-Channel Beam
Frequencies. Double Modulated Beam for unsurpassed Light Immunity. Monitor Jack for alignment with Multi-Meter. Audible
Alignment Tone. Environmental (anti-fog) Monitoring Circuit. Dynamic A.G.C. Circuit. Frost Resistant Cover.
478,00 €
PB-IN-100HF
TAKEX® PB-IN100HF IR Barrier
The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between
Transmitter and Receiver, the PB-IN-HF series offer unrivaled stability in perimeter security. Coupled with channel separation and
environmental (anti-fog) circuitry, the PB-IN-HF series has earned worldwide recognition as the standard our rivals aspire to. For
distances up to 100m (330ft) outdoor / 200m (660ft) indoor. 4 Synchronised High-Power Beams. Selectable 4-Channel Beam
Frequencies. Double Modulated Beam for unsurpassed Light Immunity. Monitor Jack for alignment with Multi-Meter. Audible
Alignment Tone. Environmental (anti-fog) Monitoring Circuit. Dynamic A.G.C. Circuit. Frost Resistant Cover.
500,00 €
PB-IN-200HF
TAKEX® PB-IN200HF IR Barrier
The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between
Transmitter and Receiver, the PB-IN-HF series offer unrivaled stability in perimeter security. Coupled with channel separation and
environmental (anti-fog) circuitry, the PB-IN-HF series has earned worldwide recognition as the standard our rivals aspire to. For
distances up to 200m (660ft) outdoor / 400m (1320ft) indoor. 4 Synchronised High-Power Beams. Selectable 4-Channel Beam
Frequencies. Double Modulated Beam for unsurpassed Light Immunity. Monitor Jack for alignment with Multi-Meter. Audible
Alignment Tone. Environmental (anti-fog) Monitoring Circuit. Dynamic A.G.C. Circuit. Frost Resistant Cover.
535,00 €
TX-114SR
TAKEX® TX114SR IR Barrier
The TX-114SR is compatible with leading wireless transmitters for rapid deployment in remote or difficult-to-cable-to areas,
ideal for triggering CCTV, lighting or warning systems in commercial, domestic and industrial applications. Dual-Zone: Up
to 12m (40ft) x 90 degrees. Dual-Zone sensor head can resist detection of small animals. Ultra-Low Current Consumption.
Powered by 3V to 9V Alkaline or Lithium Battery. Can be used with numerous Wireless Transmitter Models (Not Supplied).
Adjustable Pulse Count & Sensitivity. 0.8-1.2m Mounting Height.
232,00 €
FTN204D
MI-TECH®
FOSTER™
FTN204D
IR Barrier
Barriers with 4 double lenses 4TX+4RX (32 cross beams). FOSTER is a perimeter IR barrier with crossed beams designed to protect external
areas from intrusion, with a beguiling design and compact dimensions. Due to its innovative features and sophisticated technological content, it
belongs to the top-end product range but it is available at truly unrivalled value for money. FOSTER incorporates all the technological and functional
advantages of and, while at the same time ensuring maximum compatibility. FOSTER has a maximum range of 100 metres outdoors and it is ideal
to protect large surface areas. This barrier is sturdy, safe, weather-resistant and it is supplied with an automatic temperature control system (to avoid
malfunctioning in the event of condensation and frost) and a specific disqualification function (to avoid false alarms caused by fog).
790,00 €
TR103
MI-TECH®
TRENDY™ Plus
103 IR Barrier
TRENDY™ plus is a wireless, self-powered miniature IR barrier with double led and 24-month autonomy, which is compatible
with any radio transmitter. Range 1 meter. It consists of two symmetrical profiles to be installed on either side of the
entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even windows and
doors open. Thanks to its compact dimensions it can be easily installed in small spaces including the interspaces between
doors and windows, rolling blinds and shutters.
265,00 €
TR154
MI-TECH®
TRENDY™ Plus
154 IR Barrier
TRENDY™ plus is a wireless, self-powered miniature IR barrier with double led and 24-month autonomy, which is compatible
with any radio transmitter. Range 1,5 meters. It consists of two symmetrical profiles to be installed on either side of the
entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even windows and
doors open. Thanks to its compact dimensions it can be easily installed in small spaces including the interspaces between
doors and windows, rolling blinds and shutters.
332,00 €
TR206
MI-TECH®
TRENDY™ Plus
206 IR Barrier
TRENDY™ plus is a wireless, self-powered miniature IR barrier with double led and 24-month autonomy, which is compatible
with any radio transmitter. Range 2 meters. It consists of two symmetrical profiles to be installed on either side of the
entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even windows and
doors open. Thanks to its compact dimensions it can be easily installed in small spaces including the interspaces between
doors and windows, rolling blinds and shutters.
445,00 €
TEL. 24
+34 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
2.6
IR Perimeter Barrier
Infrared and/or Microwave Perimeter Barriers
Outdoor IR Perimeter Barrier
P/N
Model
Description
List Price
WIN 52
MI-TECH®
WINNER™ 52
IR Barrier
WINNER™ is a dual led active IR barrier with parallel beams. It consists of two symmetrical profiles to be installed on either
side of the entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even
windows and doors open. WINNER is a compact dimensions beam sensor installable between doors and windows and the
small spaces between them and blinds or shutters. WINNER guarantees an excellent reliability standard, high immunity to
sunlight and insects. 2 parallel beams, 500 mm.
122,00 €
WIN 104
MI-TECH®
WINNER™ 104
IR Barrier
WINNER™ is a dual led active IR barrier with parallel beams. It consists of two symmetrical profiles to be installed on either
side of the entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even
windows and doors open. WINNER is a compact dimensions beam sensor installable between doors and windows and the
small spaces between them and blinds or shutters. WINNER guarantees an excellent reliability standard, high immunity to
sunlight and insects. 4 parallel beams, 1.000 mm.
145,00 €
WIN 156
MI-TECH®
WINNER™ 156
IR Barrier
WINNER™ is a dual led active IR barrier with parallel beams. It consists of two symmetrical profiles to be installed on either
side of the entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even
windows and doors open. WINNER is a compact dimensions beam sensor installable between doors and windows and the
small spaces between them and blinds or shutters. WINNER guarantees an excellent reliability standard, high immunity to
sunlight and insects. 6 parallel beams, 1.500 mm.
215,00 €
WIN 208
MI-TECH®
WINNER™ 208
IR Barrier
WINNER™ is a dual led active IR barrier with parallel beams. It consists of two symmetrical profiles to be installed on either
side of the entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even
windows and doors open. WINNER is a compact dimensions beam sensor installable between doors and windows and the
small spaces between them and blinds or shutters. WINNER guarantees an excellent reliability standard, high immunity to
sunlight and insects. 8 parallel beams, 2.000 mm.
255,00 €
WIN 258
MI-TECH®
WINNER™ 258
IR Barrier
WINNER™ is a dual led active IR barrier with parallel beams. It consists of two symmetrical profiles to be installed on either
side of the entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even
windows and doors open. WINNER is a compact dimensions beam sensor installable between doors and windows and the
small spaces between them and blinds or shutters. WINNER guarantees an excellent reliability standard, high immunity to
sunlight and insects. 8 parallel beams, 2.500 mm.
275,00 €
WIN 310
MI-TECH®
WINNER™ 310
IR Barrier
WINNER™ is a dual led active IR barrier with parallel beams. It consists of two symmetrical profiles to be installed on either
side of the entrances to be protected and it allows to anticipate intrusion by leaving freedom to move indoors with even
windows and doors open. WINNER is a compact dimensions beam sensor installable between doors and windows and the
small spaces between them and blinds or shutters. WINNER guarantees an excellent reliability standard, high immunity to
sunlight and insects. 8 parallel beams, 2.500 mm.
105,00 €
Accesories and Options
P/N
WIN BASE
25
Description
Mounting base for WINNER™ RX/TX barrier.
25 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
List Price
105,00 €
2.6
IR Perimeter Barrier
Infrared and/or Microwave Perimeter Barriers
Outdoor IR Barrier Columns
P/N
Model
Description
List Price
MB200
BUNKER™
MB200 IR
Barrier Column
The MB Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 180º protection
range, giving the beams the possibility to be mounted at any height within the tower. The MB Series has been designed to
allow the fitting of Infra-red Beams from all of the world's leading manufacturers. Width: 13cm. (5.12"). Depth: 14cm. (5.51").
Height: 200 cm. Weight: 11Kg. Structure: Anodized black aluminium. Shields: Polycarbonate with UV treatment.
384,00 €
MB300
BUNKER™
MB300 IR
Barrier Column
The MB Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 180º protection
range, giving the beams the possibility to be mounted at any height within the tower. The MB Series has been designed to
allow the fitting of Infra-red Beams from all of the world's leading manufacturers. Width: 13cm. (5.12"). Depth: 14cm. (5.51").
Height: 300 cm. Weight: 20Kg. Structure: Anodized black aluminium. Shields: Polycarbonate with UV treatment.
583,00 €
PT200
BUNKER™
PT200 IR Barrier
Column
Double side protection tower (360°), available in different heights, that allows installing the active infrared photobeams at the
same height at both sides. Height 2m. Include 2 Polycarbonate covers, UV resistant. Extruded anodized aluminum tower.
Anti-sabotage tamper switch. Fixing kit. Ground mounting. For wall mounting the accessory PTWB is required. The perimeter
security tower is sold with the minimum required elements for a proper installation.
517,00 €
Accesories and Options
P/N
Description
List Price
MBFB
MBFB accessory is used to fix IR perimeter towers, MB industrial type, to the ground and this way achieve maximum fixation.
82,00 €
MBPS
Anti-climb tamper. It allows the tower to detect pressure when this one is superior to 25kg. It is a useful accessory for perimeter towers installed close
to a wall or an enclosure. There is high risk of intrusion inside the security perimeter when for example a wooden plank is placed on the IR tower in
order to help a person to jump into the protected perimeter and circumvent this way the whole system.
87,00 €
PTFB
Concrete base for series PT columns.
82,00 €
PTH24V
Heating kit for PT/MB series outdoor barriers. 12/24 Vcc 250/500 mA.
37,00 €
PTS
Thermostat for PT/MB series outdoor barriers.
46,00 €
Outdoor Microwave Barriers
P/N
ERMO482200
26
Model
CIAS® ERMO
482/200
Microwave Barrier
Description
Uses a 200mm parabolic antenna which creates narrower fields, more useful where the available space is restricted but the distances are longer.
Detector specifically designed for external protection and is therefore able to adjust for all types of weather conditions. It has sensitivity and
integration controls for target discrimination. 4 pre-settable modulation codes (channels) that prevents interference at crossover points. RANGE
200 METRES. Frequency = x-band certified in many countries and conforms to CE, USA and Canadian standards. Power supply = 19Vac,
13.8Vdc, 24Vdc. Consumption = TX 100 ma – RX 100 ma (a 13,8 vdc). Temperature = -35°c/+65°c. Channels = 4. Dimensions/weight = max 310
mm, depht 260 mm. Alignment = Electronic using STC95. Outputs Relays = alarm, tamper, fault. Special applications = Explosion proof available.
TEL. 26
+34 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
List Price
1.426,00 €
2.6
IR Perimeter Barrier
Infrared and/or Microwave Perimeter Barriers
Outdoor Microwave Barriers
27
P/N
Model
Description
List Price
ERMUSA60
CIAS®
ERMUSA60
Microwave Barrier
ERMUSA is a microwave intrusion detection systems for volumetric external protection, particularly useful for residential and industrial
applications. It is ideal for the protection of long corridors, balconies, gates, scaffolding and medium length perimeters. RANGE 60 M.
ERMUSA consists of two parts, one transmitter and one receiver which, when mounted facing each other at different distances, up to
the maximum range create a volumetric protection field able to detect intrusion attempts. Frequency = From 9,2 to 10,6 GHz conform
to CE, USA e Canadian standards. Power supply = 13,8 Vdc. Consumption = 70 mA (Tx + Rx). Temperature = -35°C/+65°C. Channels
= 4. Dimensions/Weight = 125 x 125 x 50 mm / 840g (TX+RX). Outputs = 3 relays Alarm, Tamper (Fault only “ES” vers.).
361,00 €
27 913.750.136 · FAX. +34 913.758.894 · INFO@EMACS.ES · WWW.EMACS.ES
TEL. +34
TEL . +3 4 913.750.136
FAX . +3 4 913.758.894
C\ SANTA LEONOR, 63. PLANTA 4, LOCAL I. 28037 MADRID