Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
’
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
Know what's
below.
Call before you dig.
CONTAINER SHRUB PLANTING DETAIL
BALLED AND BURLAPPED SHRUB PLANTING
DETAIL
MULTI-STEMMED TREE PLANTING DETAIL
Know what's
DECIDUOUS CANOPY TREE PLANTING DETAIL
(2" cal. or greater)
below.
Call before you dig.
SHRUB/PERENNIAL BEDS DETAIL
DECIDUOUS TREE PRUNING DETAIL
EARTH/SPADE EDGE DETAIL
MAINTENANCE STRIP SECTION DETAIL
Know what's
below.
Call before you dig.
C:\Users\ddeweese06\Documents\BIMLOCAL\13096_Mainstreet_Overland_Park_v14_CENTRAL_ddeweese06.rvt
3
A200
2
A202
SNF Semi-Private
B129A
SNF Semi-Private
B130A
Austin Carolinas New York Philadelphia St. Louis
Office:
SNF Semi-Private
B130
SNF Semi-Private
B129
319 N. 4TH ST.
SUITE 1000
ST. LOUIS, MO 63102
p 314-231-5700
f 314-754-0383
SNF
Semi-Private
B130B
SNF
Semi-Private
B129B
Project Team:
STAIR
ST-01-1
SNF Private
B128
SNF Private
B127
CIVIL ENGINEER
SNF Private
B126
SNF Private
B125
ATWELL, LLC.
1245 EAST DIEHL ROAD, SUITE 100
NAPERVILLE, IL 60563
630-577-0800
630-577-0900
SNF Private
B124
O2 STORAGE
B122
SNF Private
B123
SNF
Semi-Private
B116A
SNF Semi-Private
B116
3
A202
SNF DINING
B117
HEARTH
B118
3/20/2014
10:31:56 AM
NOURISH.
B120
Staff Toilet
B113
SOILED
B114
Nurse Station
B115
Professional Seal:
CLEAN
B112
Meds
B111
PORCH
B121
SNF
Semi-Private
B116B
SERVING KITCHEN
B119
SNF
Semi-Private
B110A
SNF Semi-Private
B110
DEN
B109
FINAL
DEVELOPMENT
PLANS
SNF
Semi-Private
B110B
Spa
B108
4
A202
SNF Private
B106
HSKP
B107
3
A201
SNF Private
207 SF
SNF Private
207 SF
WASH AREA
A161
WD
DELIVERY
A154
SNF Private
B102
MECH
A155
MENS
TOILET
A105
SOILED
A160
CLEAN
LINEN
A165
SNF Private
C101
CENTRAL
SUPPLY
A159
2
A200
A301
REF.
CORRIDOR
A151
OFFICE
A135
SNF Private
C104
SNF Private
C106
SNF Private
C108
SNF Private
C110
SNF
Semi-Private
C112A
EQUIPMENT
A131
OT BEDROOM
A132
ELEVATOR
MECH
A107
KITCHEN
A122
SNF
Semi-Private
C118B
SNF
Semi-Private
C118A
2
A203
3
A203
SOILED
C114
CLEAN
C116
SNF
Semi-Private
Entry
C118
SNF Private
C127
SNF Private
C128
SNF Private
C129
SNF Private SNF Private
C136
C138
SNF Private
C140
SNF Private
C142
SNF Private
C130
4
A203
Stair
ST-03-1
FOYER
A104
CORRIDOR
C100
4
A200
O2
C133
ELEV.
STAFF LOUNGE
A166
?
?
SNF
Semi-Private
Entry
C112
STAIR
ST-02-1
WOMENS
TOILET
A106
SNF
Semi-Private
C112B
SNF Private
C134
OFFICE
A153
2
A201
1
1
A203
HSKP
C113
REF.
PASSAGE
A133
OPEN
OFFICE
A134
OT
KITCHEN
A129
OT
BATHROOM
A130
ELEV.
D W
PHYS. OFFICE
A124
SNF Private
C101
SALON
A109
MASSAGE /EXAM
A125
SNF Private
C105
SNF Private
C107
SNF Private
C109
SNF Private
C111
Spa
C115
Meds
C120
Staff
Toilet
C121
SNF DINING
C122
LOUNGE
A109A
WORK
A114
HEARTH
C123
PORCH
C124
CORRIDOR
A110
SNF Private
C135
SERVING
KITCHEN
C125
SNF Private
C131
LOBBY
A101
REHAB
A126
STORAGE
A115
SNF Private
C103
Sitting Area
C143
THEATRE
A111
PHYS. EXAM
A123
OFF 6
A116
DEN
C117
PUB
A108
SNF Private
C137
SNF Private
C139
SNF Private
C141
SNF Private
C132
REF.
CONF
A113
CORRIDOR
A112
OFF 4
A120
OFF 3
A119
OFF 2
A118
VESTIBULE
A100
CONCIERGE
A102
6
A203
1
A201
1
A200
2 OVERALL FIRST FLOOR PLAN
A101
1/16" = 1'-0"
0 2' 4'
8'
12' 16'
PROJECT DESCRIPTION
OFF 5
A121
OFF 1
A117
W. 75TH AND ANTIOCH RD., OVERLAND PARK, KS
SNF Private
B104
ELECT
A157
HEALTH AND WELLNESS SUITES
OF OVERLAND PARK, KS
WASH EQUIP.
A162
3/4/2014 CITY SUBMITTAL
Project Title:
The Professional Architect's seal affixed to this sheet
applies only to the material and items shown on this
sheet. All drawings, instruments or other documents not
exhibiting this seal shall not be considered prepared by
this architect, and this architect expressly disclaims any
and all responsibility for such plans, drawings or
documents not exhibiting this seal.
This drawing and details on it are the sole property of the
architect and may be used for this specific project only. It
shall not be loaned, copied or reproduced, in whole or
part, or for any other purpose or project without the
written consent of the architect.
No.
Description
Date
Sheet Title:
OVERALL FIRST
FLOOR PLAN
Project Number:
13096
LG v2.1
Drawn By:
Author
Issue Date:
3/4/2014
Sheet Number:
A101
SNF Private
B231A
SNF Private
B230A
SNF
Semi-Private
Entry
B231
SNF
Semi-Private
Entry
B230
SNF
Semi-Private
B231B
STAIR
ST-01-2
STORAGE
B223
CORRIDOR
B200
HEARTH
B221
SNF Semi-Private Entry
B216
CLEAN
UTILITY
B212
Meds
B213
SERVING
KITCHEN
B219
SNF
Semi-Private
B216B
Professional Seal:
SNF
Semi-Private
B210A
SNF Semi-Private Entry
B210
DEN
B211
FINAL
DEVELOPMENT
PLANS
SNF
Semi-Private
B210B
Spa
B208
SNF Private
B206
SNF Private
B207
SNF Private
B202
SNF Private
B203
MULTI-PURPOSE
A203
SNF Private
C202
SNF Private
C204
SNF Private
C206
STAIR
ST-02-2
SNF Private
C208
SNF Private
C210
SNF
SEMI-PRIVATE
C212A
SNF
Private
C218A
SNF
Semi-Private
C212B
SNF
Semi-Private
C218B
2
A203
3
A203
SNF Private
C234
SNF Private
207 SF
SNF
SEMI-PRIVATE
C212
LOUVERED MECHANICAL SCREEN WALL
2
A201
SOILED
C214
MECHANICAL
A201
CLEAN
C216
SNF
Semi-Private
C218
SNF Private
C227
SNF Private
C228
SNF Private
C229
SNF Private
C236
SNF Private
C238
SNF Private
C240
SNF Private
C242
STAIR
ST-03-2
SNF Private
C230
4
A203
CORRIDOR
C200
1
4
A200
ELEV.
A301
ROOF TOP UNIT
Nurse Station
C219
DEN
C217
ELEV.
LOBBY
A200
PROGRAM SPACE
A202
?
?
SITTING
C243
Spa
C215
SNF Private
211 SF
SNF Private
206 SF
SNF Private
207 SF
SNF Private
206 SF
SNF Private
207 SF
SNF Private
207 SF
Meds
C220
Staff
Toilet
C221
SNF Private
C235
SERVING
KITCHEN
C225
Roof BELOW
SNF DINING
710 SF
PORCH
C224
SNF Private
C231
SNF Private
C237
SNF Private
C239
SNF Private
C241
SNF Private
C232
HEARTH
C223
OPEN TO BELOW
Roof BELOW
6
A203
1
A201
1
A200
1 OVERALL SECOND FLOOR PLAN
A102
1/16" = 1'-0"
0 2' 4'
8'
12' 16'
PROJECT DESCRIPTION
OPEN TO
BELOW
W. 75TH AND ANTIOCH RD., OVERLAND PARK, KS
SNF Private
B205
HEALTH AND WELLNESS SUITES
OF OVERLAND PARK, KS
Project Title:
1
A203
SNF Private
B204
2
A200
ATWELL, LLC.
1245 EAST DIEHL ROAD, SUITE 100
NAPERVILLE, IL 60563
630-577-0800
630-577-0900
SNF
Semi-Private
B216A
SOILED
UTILITY
B214
Nurse
Station
B217
NOURISH.
B218
3/20/2014
10:32:07 AM
Project Team:
SNF Private
B224
SNF DINING
B220
3
A201
319 N. 4TH ST.
SUITE 1000
ST. LOUIS, MO 63102
p 314-231-5700
f 314-754-0383
CIVIL ENGINEER
SNF Private
B225
4
A202
Office:
SNF Semi-Private
B226
SNF Private
B227
PORCH
B222
SNF
Semi-Private
B230B
SNF Private
B228
SNF Private
B229
3
A202
Austin Carolinas New York Philadelphia St. Louis
3/4/2014 CITY SUBMITTAL
C:\Users\ddeweese06\Documents\BIMLOCAL\13096_Mainstreet_Overland_Park_v14_CENTRAL_ddeweese06.rvt
3
A200
The Professional Architect's seal affixed to this sheet
applies only to the material and items shown on this
sheet. All drawings, instruments or other documents not
exhibiting this seal shall not be considered prepared by
this architect, and this architect expressly disclaims any
and all responsibility for such plans, drawings or
documents not exhibiting this seal.
This drawing and details on it are the sole property of the
architect and may be used for this specific project only. It
shall not be loaned, copied or reproduced, in whole or
part, or for any other purpose or project without the
written consent of the architect.
No.
Description
Date
Sheet Title:
OVERALL SECOND
FLOOR PLAN
Project Number:
13096
LG v2.1
Drawn By:
Author
Issue Date:
3/4/2014
Sheet Number:
A102
C:\Users\ddeweese06\Documents\BIMLOCAL\13096_Mainstreet_Overland_Park_v14_CENTRAL_ddeweese06.rvt
3
A200
2
A202
Austin Carolinas New York Philadelphia St. Louis
Office:
319 N. 4TH ST.
SUITE 1000
ST. LOUIS, MO 63102
p 314-231-5700
f 314-754-0383
ALU
B324
ALU
B325
Project Team:
ALU
BEDROOM
B324A
ALU
BEDROOM
B325A
CIVIL ENGINEER
ATWELL, LLC.
1245 EAST DIEHL ROAD, SUITE 100
NAPERVILLE, IL 60563
630-577-0800
630-577-0900
STAIR
ST-01-3
ALU STUDIO
B322
ALU STUDIO
B323
ALU STUDIO
B320
ALU STUDIO
B321
ALU STUDIO
B318
ALU
BEDROOM
B312A
STORAGE
B317
ALU
B312
ALU DINING
499 SF
CORRIDOR
B300
REF.
HEARTH
B314
PORCH
221 SF
ALU STUDIO
B310
NOURISH
52 SF
SERVING
KITCHEN
B313
FINAL
DEVELOPMENT
PLANS
PUB
B309
ALU STUDIO
B307
ALU STUDIO
B308
4
A202
3/4/2014 CITY SUBMITTAL
Project Title:
ALU STUDIO
B306
ALU STUDIO
B305
ALU STUDIO
B303
1
A203
ALU STUDIO
B304
ALU STUDIO
B302
ALU
B301A
2
A200
ALU BED
B301B
2
A201
ALU STUDIO
C302
ALU BEDROOM
C304B
2
A203
ALU
C304A
3
A203
STAIR
ST-02-3
MULTI-PURPOSE
A302
TOILET
A303
4
A203
CORRIDOR
C300
1
A301
4
A200
ELEV.
ALU REHAB GYM
C306
ELEV.
LOBBY
A300
ALU
Studio
C303
ALU Studio
C301
96'-3"
ALU Studio
C305
ALU Studio
C307
17'-11"
PROJECT DESCRIPTION
6
A203
1
A201
1
A200
1 OVERALL THIRD FLOOR PLAN
A103
1/16" = 1'-0"
0 2' 4'
8'
W. 75TH AND ANTIOCH RD., OVERLAND PARK, KS
3
A202
Professional Seal:
HEALTH AND WELLNESS SUITES
OF OVERLAND PARK, KS
3/20/2014
10:32:33 AM
ALU STUDIO
B319
12' 16'
The Professional Architect's seal affixed to this sheet
applies only to the material and items shown on this
sheet. All drawings, instruments or other documents not
exhibiting this seal shall not be considered prepared by
this architect, and this architect expressly disclaims any
and all responsibility for such plans, drawings or
documents not exhibiting this seal.
This drawing and details on it are the sole property of the
architect and may be used for this specific project only. It
shall not be loaned, copied or reproduced, in whole or
part, or for any other purpose or project without the
written consent of the architect.
No.
Description
Date
Sheet Title:
OVERALL THIRD
FLOOR PLAN
Project Number:
13096
LG v2.1
Drawn By:
Author
Issue Date:
3/4/2014
Sheet Number:
A103
C:\Users\ddeweese06\Documents\BIMLOCAL\13096_Mainstreet_Overland_Park_v14_CENTRAL_ddeweese06.rvt
Austin Carolinas New York Philadelphia St. Louis
Office:
319 N. 4TH ST.
SUITE 1000
ST. LOUIS, MO 63102
p 314-231-5700
f 314-754-0383
Project Team:
CIVIL ENGINEER
ATWELL, LLC.
1245 EAST DIEHL ROAD, SUITE 100
NAPERVILLE, IL 60563
630-577-0800
630-577-0900
3/20/2014
10:31:38 AM
Professional Seal:
FINAL
DEVELOPMENT
PLANS
2.6
3 Mechanical Screen from Courtyard
2.6
PROJECT DESCRIPTION
EYE ELEVATION OF ALL CAMERAS IS 5'-6" ABOVE
FINISH FLOOR ELEVATION OF LEVEL 1
3-STORY
BUILDING
70'-0"
3
2
W. 75TH AND ANTIOCH RD., OVERLAND PARK, KS
2 Mechical Screening from West Parking
HEALTH AND WELLNESS SUITES
OF OVERLAND PARK, KS
3/4/2014 CITY SUBMITTAL
Project Title:
The Professional Architect's seal affixed to this sheet
applies only to the material and items shown on this
sheet. All drawings, instruments or other documents not
exhibiting this seal shall not be considered prepared by
this architect, and this architect expressly disclaims any
and all responsibility for such plans, drawings or
documents not exhibiting this seal.
1 STORY
BUILDING
2 STORY
BUILDING
This drawing and details on it are the sole property of the
architect and may be used for this specific project only. It
shall not be loaned, copied or reproduced, in whole or
part, or for any other purpose or project without the
written consent of the architect.
Description
Date
70'-0"
No.
1
Sheet Title:
3D - MECH. SCREEN
Project Number:
LG v2.1
13096
1 Mech Screening from South Propety Line
2.6
Camera - Keyplan
Drawn By:
Author
Issue Date:
3/4/2014
Sheet Number:
2.6
Col
or4-CementF
i
berL
a
p
S
i
di
ng
Col
or1-CementF
i
berBoa
r
d
Pa
nel
s
Ma
i
ns
t
r
eet-Hea
l
t
ha
ndWel
l
nes
sS
ui
t
esofOv
er
l
a
ndPa
r
k
,
KS
W.
75t
ha
ndAnt
i
oc
hRoa
d,
Ov
er
l
a
ndPa
r
k
,
KS
Upda
t
edCol
or
s-Addendum t
oma
t
er
i
a
l
boa
r
ds
ubmi
t
t
edonMa
r
c
h5,
2014
S
ubmi
t
t
ed:
32514
A n af f o r d a b l e s o l ut i o n f o r
e q u i p m e nt s c r e e n in g i s
finally here…
E n v i s o r e q u i p m e n t s c re e n s n o w o f f e r a r c h i t e c t s t h e
f le x i b i l i t y t o c r e a t e a f f o r d a b l e , e l e g a n t , c u s t o mi z e d
sc r e e n i n g so l ut i o n s t h a t in t eg ra t e w i t h t h ei r b u i ld i n g
d e s i g n , a l l w i t h n o r o o ft o p p e n e t r a t i o n .
O u r p a t e nt e d e q u i p me n t s c re en s a l s o p ro v i d e a v i a b l e
sol u ti on f or mu n ic ip a l sc r e e n in g c o d e r e q u ir e me nt s
o n e v e r y t h i n g f r o m H VA C u n i t s t o
The Ohio State University Foundation - Columbus, Ohio
chillers, air handlers, power exhausts, roof stack s,
c o m m u n i c a t i o n e q u i p m en t , d u m p st e r s - y o u n a m e i t !
Customizing a scr een to fit
your needs is easy…
52” Louver Panels
Simply choose between canted or vertical, decide on a
panel design, select a t op trim (optional), and pick a
color. It’s t hat simple! We c an customize any fe atur e
to your particular design requirements, including custom
panel designs, custom colors, and custom top trim designs.
If you don’t see w hat you need , tell us w hat you w ant.
We’ll build it for you.
Features
.System
Screen
. Vertical
Panel Design
. Louver
Cove Top Trim
. Panel Color: Oyster
. Top Trim Color: Terra Cotta
U.S. Patent No. 5,664,484
www.cityscapesinc.com
Step 1: Choose a Canted or Vertical System
Envisor screens are the perfect alternative to parapet walls and they satisfy even the strictest screening code requirements.
Both styles feature our patented attachment method, which secure our screens directly to the equipment with no rooftop
penetration. Screen heights are available to screen virtually anything you desire.
Step 2: Decide on a Panel Design
WIDE RIB
BATTEN
LOUVER
PAN
BRICK
Pan els are av a ila ble in 5 stan dar d sty le s al low ing you to cont rol th e project w itho ut sacrif icing th e essentia l element s
of the build ing design. The panels a re constructed of t hermoformed high impact ABS with a co-ex trude d UV pr otec tive
la ye r on bo th si des . The pa nel s a re hel d f i rml y in pl ace u sing a r u st- free, d ou ble t ra cked a lu min um ra il syst em. Thi s
ena bles th e pa nels to slid e sid e-t o-si de f or easy ac cess to th e un it d u ring serv icing an d ma intenan ce. Don ’t see a pa nel
tha t f its your proj ect? Tell u s a nd w e’ll ma k e on e tha t you d esign.
Step 3: Select a Top Trim
6.5”
6.5”
(optional)
8”
5 1/2”
3”
C OV E
A LA MO
STEP 1
S TEP 2
FLAT
Decorat ive top trip options of fer the flexibili ty to f urther customize the elegant appearance of the screens by picking
up on y our building design ele men ts and incorporat ing t hose details into the screen i tself. Although optiona l, they
off er one more way to ma ke screens part of the design, not pa rt of the problem. We can manu facture any size and shape
top t rim you create.
www.cityscapesinc.com
Step 4: Pick a Designer Color
ALABASTER
ALMOND
OYSTER
PUTTY
KHAKI
SAGEBRUSH
SHADOW GRAY
SLATE GRAY
RANCHERO RED
CYPRESS MOSS
FOREST GREEN
MANSARD BROWN
Our designer colors complement most architectural applications, but don’t let standard colors limit your creativity. We have t he
ability to match to any cross-referenced color specification. Send us samples to match. We’ve even matched a color to a rock!
Colors shown are only approximate. Please call for actual samples.
Step 5: Custom Designed Solutions
TOP TRIM ADDED
CUSTOM PANELS
MULTIPLE UNIT SCREENS
Envisor equipment screens can be manufactured in a limitless combination of shapes and configurations to help reduce cost, add
to the aesthetics of a building, or both. Let us design one for you! Just tell us the equipment manufacturer, the model numbers,
and the special requirements you might have. Call for a complete design kit today or visit our website at www.cityscapesinc.com.
www.cityscapesinc.com
Product Features
No Rooftop Penetration
Pre-Engineered Screening System
Screening Code Solution
Attractive Alternative to Parapet Walls
Multiple Panel Designs
Designer Top Trim Accents
Vertical or Canted Designs
Wide Range of Designer Colors
Panels Slide for Easy Service Access
Custom Design Capabilities
Our panels are designed to slide side-to-side in either
direction for easy access to the equipment for servicing
and routine maintenance.
www.cityscapesinc.com
Equipment Vendors
Retail Clients
Commercial HVAC and Chiller Equipment Vendors who have
installed ENVISOR Rooftop Equipment Screens include:
Some of the clients utilizing ENVISOR Rooftop Equipment
screens on their HVAC and Chiller Equipment include:
Trane
Lennox
York
Carrier
Heil
AAON
Liebert
Rheem
Reznor
Aldi
AMC Theaters
Avis
Best Buy
Blockbuster
Costco
CVS
Hertz
Home Depot
Kohl’s
Lowe’s
Hussmann
Airwise
Bryant
McQuay
BAC
Hill Phoenix
Am. Standard
Munters
Engineered Air
by CityScapes International
4200 Lyman Court
Hilliard, OH 43026
Toll Free: 877.727.3367
Fax: 800.726.4817
www.cityscapesinc.com
McDonald’s
Meijer
Mobil Oil
Muvico
Rite Aid
Sam’s Club
Sears
Target
Walgreen’s
Wal-Mart
Wendy’s
Screen Color Selections
Alabaster
Almond
Oyster
Putty
Khaki
Sagebrush
Shadow Gray
Slate Gray
Ranchero Red
Cypress Moss
Forest Green
Mansard Brown
This is a printed version of ABS plastic material. Color may vary slightly.
Toll Free: 877.727.3367
Fax: 800.726.4817
www.cityscapesinc.com
WLS LIGHTING SYSTEMS
206MH-VL
206MH SERIES
6” METAL HALIDE
RECESSED CANOPY
SPECIFICATIONS
CONSTRUCTION - Frame-in housing constructed of galvanized heavy gauge steel. Socket
housing made of extruded aluminum.
ELECTRICAL - Ballast are Class P, magnetic encased and potted. Specify 120V or 277V. A
self resetting thermal protector is provided standard.
MOUNTING - Minimized overall housing dimensions simplify installation and access to
junction box. Butterfly brackets accept 27” or 52“ C-Channels, nailer bars or EMT conduit.
Accommodates ceilings up to 1” thick.
206MH-VOBP
LISTING - UL listed to U.S. and Canadian safety standards. Non-IC rated. 206MH-VL is listed
for wet locations. All others listed for damp locations only. All are listed for use with thru
wiring. IBEW Union made in the U.S.A.
PRODUCT HIGHLIGHTS:
• 206MH-VL has a premium quality reflector with a white or clear semi-specular regressed
splay and glass lens insert.
• All others have a premium quality open reflector with a variety of baffle options and
decorative accessories.
• .050” spun aluminum reflector available in low-irredescent Alzak® or painted finishes. White
self-trim flange.
REFLECTORS/DISTRIBUTION PATTERNS
• Vertical orientation provides medium beam spread for even illumination at higher ceiling
heights or added punch at lower heights.
• Computer-aided design optimizes visual comfort, efficiency and distribution.
• Socket adjustable from below ceiling without tools.
• Pulse rated rejection type socket for open rated lamp for the 206MH-VL and 206MH-VOBE.
206MH-VOBE
DIMENSIONS
206MH-VL
206MH-VOBP
ROUGH IN: 6-3/8”(162mm)
ROUGH IN: 6-3/8”(162mm)
8-3/4”
(226mm)
206MH-ADJ
Alzak® is a registered
trademark of the
Aluminum Company
of America.
8-3/4”
(226mm)
5-3/4”
(146mm)
6-15/16”
(176mm)
5-3/4
(146mm)
6-15/16”
(176mm)
27”
(686mm)
27”
(686mm)
206MH-ADJ
206MH-VOBE
ROUGH IN: 6-3/8”(162mm)
ROUGH IN: 6-3/8”(162mm)
8-3/4”
(222mm)
9-1/4”
(235mm)
5-3/4”
(146mm)
5-3/4”
(16mm)
6-15/16”
(176mm)
6-15/16”
(176mm)
27”
(686mm)
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
27”
(686mm)
www.wlslighting.com
01 Rev. 4/12
206MH SERIES
6” METAL HALIDE
RECESSED CANOPY
ORDERING INFORMATION
SERIES
LAMP
WATTAGE
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Mounting
LIGHT
SOURCE
BAFFLE/
WALL WASH
NONE
206MH-VL
Lensed
Vertical Lamp
50W
70W
100W
150W
MHE - Metal Halide
ED17 Coated
open rated
206MH-VOBP
Open & Baffled
Vertical PAR Lamp
70W
BAFFLE
MH38 - Metal Halide
PAR38 Coated BBF - Black
WBF - White
open rated
70W
100W
MH30 - Metal Halide
PAR30 Coated
open rated
50W
70W
100W
150W
MHE - Metal Halide
ED17 Coated
open rated
BAFFLE
BBF - Black
WBF - White
MH30 - Metal Halide
PAR30
MH38 - Metal Halide
PAR38
NONE
206MH-VOBE
Open Wall Wash
Vertical ED17
Lamp
206MH-ADJ
Open
Adjustable
206MH-VL
39W
70W
100W
100
MHE
BBF
REFLECTOR
FINISH
OPTIONS
CGLW - Clear Tempered Glass
Lens, White Splay
CGLC - Clear Tempered Glass Lens,
Clear Semi-specular Splay
PGLW - Prismatic Glass Lens,
White Splay (C73 pattern)
PGLC - Prismatic Glass Lens,
Clear Semi-specular Splay
(C73 pattern)
FGLW - Fresnel Glass Lens,
White Splay
FGLC - Fresnel Glass Lens, Clear
Semi-specular Splay
FUSE - Fuse
SE - Electronic Ballast
E - QEH1
QEH - Quartz Restrike (supplied
with 1 - 50Watt Xenon
lamp)2
NO - No Options
ACCESSORIES
C27 - 27” Channel Bars (pair)
C52 - 52” Channel Bars (pair)
NB - Nailer Bar Kit (set of 4)
SCIK - Suspended Ceiling
Installation Kit (set of 4
bars and 4 grid clips)
CL - Clear Semi-specular
CM - Clear Matte
GD - Champagne Gold
Semi-specular
WH - White
PR - Pewter Semi-specular
WT - Wheat Semi-specular
BZ - Bronze Semi-specular
BAFFLE COLOR
CL - Clear Semi-specular
CM - Clear Matte
GD - Champagne Gold
Semi-specular
WH - White
PR - Pewter Semi-specular
WT - Wheat Semi-specular
BZ - Bronze Semi-specular
CL - Clear Semi-specular
CM - Clear Matte
GD - Champagne Gold
Semi-specular
WH - White
PR - Pewter Semi-specular
WT - Wheat Semi-specular
BZ - Bronze Semi-specular
CL
NO
C27
(EXAMPLE ORDER)
ORDER:
WLS-206MHFOOTNOTES:
1 - Not available with the 206MH-ADJ.
2 - Available with the 206MH-VL and 206MH-VOBE only.
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 4/12
FV SERIES
WLS LIGHTING SYSTEMS
VERTICAL LAMP / FLAT GLASS LENS
SPECIFICATIONS
HOUSING - The FV Series formed aluminum housing is finished to produce a clean, sharp
appearance and ensures weather-tight construction. Available in 2 sizes: Medium (reduced
envelope 400 Watt Lamp) and Reduced (reduced envelope 1000 Watt Lamp).
LENS/GASKET - A flat tempered glass lens is sealed to the housing with an EPDM gasket,
preventing entry of moisture, dust and insects. Combined with the vertical burn feature, the
flat glass lens provides high performance lighting.
TOP ACCESS - Is secured by four captive stainless steel fasteners and provides ease of
installation and servicing.
Flat-lensed fixtures meet IESNA
full cutoff classification
DIMENSIONS
POLE TOP MOUNT
A
ARM MOUNT
A
B
FINISHES - Each fixture is finished with a baked-on polyester powder finishing process to
give the fixture an exceptionally attractive appearance. Standard finish colors include
bronze, black, platinum and white. The polyester finish withstands extreme weather
changes without cracking or peeling. Consult factory for available custom colors and
pinstripe decal options.
REFLECTORS/DISTRIBUTION PATTERNS - The FV Series fixture is available in five
B
C
reflector systems and distribution patterns, all with vertical burn lamps: Type II (2), Type III
REFLECTORS/DISTRIBUTION
PATTERNS
(3), Type V (5), Perimeter Forward
Throw (FP) and Super Reflector (SR) for a minimum
12"
(305mm)
FVM Arm Mount
FVMPT Pole Top
FVR Arm Mount
FVRPT Pole Top
A
B
21-5/8"(549mm)
21-5/8"(549mm)
21-5/8"(549mm)
21-5/8"(549mm)
12-3/4"(324mm)
12-3/4"(324mm)
16-1/8"(410mm)
16-1/8"(410mm)
mounting height of 30 feet. Reflectors are field-rotatable, enabling generous flexibility in
distribution patterns without fixture movement.
C
—
21-15/16"(557mm)
—
25"(635mm)
LUMINAIRE EPA CHART
LIGHT SOURCES - Designed to operate with Pulse-Start Metal Halide, Natural White,
Super Metal Halide, Metal Halide, Metal Halide Reduce Envelope or High Pressure Sodium.
SOCKETS - Porcelain mogul-base sockets with spring-reinforced contacts.
FVM SERIES
12" Bracket
3.2
FVR SERIES
12" Bracket
3.8
D180°
6.3
7.6
D90°
5.7
7.6
T90°
8.8
11.4
BRACKETS - Arm Mount: 5 1/2 “ x 2 1/2” x 12” length shipped standard. (An 8” bracket
TN120°
9.0
11.4
Q90°
11.3
15.2
Pole Top
3.2
4.0
is avaiable for single or D180 configurations, but must be ordered separately from Options
column of the ordering chart.) A Round Pole Plate (RPP) is required for mounting to 3” - 5”
round poles. (See Options in Luminaire Ordering Information.)
Pole Top: Cast aluminum mounting hub conceals the wiring compartment and mounting
hardware (consisting of four 11/16” O.D. aluminum rods for medium fixtures and 7/8” O.D.
aluminum rods for large fixtures, and high-strength grade-five steel bolt with nylon insert
and split lock washer for double locking.)
FV SERIES
Flat Lens
Single
Note: House Side Shield adds to fixture EPA. Consult factory.
MOUNTING BRACKETS
POLE TOP MOUNT
BOLT ON ARM
BALLAST - Pulse Start Metal Halide, Metal Halide, Super Metal Halide, and High Presure
Sodium feature a high-power factor CWA ballast, and are designed for -20o F operation.
DECAL STRIPING - WLS offers optional color-coordinated decals in 9 standard colors to
accent the fixture. Decal is guaranteed for five years against peeling, cracking, or fading.
wet location
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 12/11
FV SERIES
VERTICAL LAMP / FLAT GLASS LENS
ORDERING INFORMATION
LUMINAIRE
DISTRIBUTION
FVM
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Mounting
LAMP
LIGHT
WATTAGE
SOURCE
2 - Type II
250W
3 - Type III
320W
FP - Perimeter
Forward
Throw
350W
(PSMH only)
400W
LINE
PSMH - Pulse-Start
Metal Halide
HPS - High Pressure
Sodium
LUMINAIRE
VOLTAGE 3
LENS
FG - Flat Glass
FINISH
BRZ - Bronze
480V
MT - Multi Tap
TT - Tri Tap
4
2
NW - Natural White
AF - Automotive
Forward
Throw
AI - Automotive
Interior
SR - Super Reflector
775W
575W
FV
5
Lamp
GS - Glare
Color
Shield
8BK - 8" Bracket
RPP - Round
Pole Plate
BKT - WM - Wall
Mount Plate
400W
575W
(PSMH only)
750W
(PSMH only)
875W
(PSMH only)
1000W
(not available
in HPS)
2 - Type II
3 - Type III
FP - Perimeter
Forward
Throw
5 - Type V
PLT - Platinum
WHT - White
5 - Type V
FVR
LL - Less
BLK - Black
MSV - Metallic
Silver
CC - Custom
250W
320W
350W
400W
OPTIONS
PT - Pole Top
MHR - Metal Halide
Reduced
Envelope
1000 Watt *
PSMH - Pulse-Start
Metal Halide
SF - Single
Fusing
DF - Double
Fusing
AS - Accent
HPS - High Pressure
Sodium 1
Striping
PC - Photo Cell
NO - No Options
NW - Natural White
1000
MH
FG
MT
BRZ
NO
(EXAMPLE ORDER)
ORDER:
WLS
FOOTNOTES:
1- When ordering pole top fixtures for tenon mounting, a pole top adaptor must be ordered.
2- Tri-Tap not available in 1000 Watt PSMH. Voltage must be specified - 120V, 277V or 347V.
3- For international voltages, consult factory.
4- MT – Multi Tap is shipped standard unless otherwise specified. Multi Tap consists of 120V, 208V, 240V, and 277V.
Multi Tap is pre-wired for highest voltage. Alternate voltages will require field re-wiring.
5- Tri-Tap is shipped standard for Canadian applications. Tri-Tap consists of 120V, 277V, and 347V.
Tri-Tap is pre-wired for highest voltage. Alternate voltages will require field re-wiring.
6- An 8" bracket can only be ordered with single and D180° configurations.
7- On FVR/FVRPT photoelectric control can only be used with 400 Watt PSMH.
ACCESSORY ORDERING INFORMATION
* In accordance with the 2007 Energy Independance and Security Act (EISA), fixtures will
no longer be avaiable in Probe Start Metal Halide with wattages from 150 watts through
500 watts for new installations. Replacement parts for exisitng fixtures are still available.
Color Decals
45 – Light Gold Metallic
55 – Black
20 – Charcoal Metallic
50 – White
94 – Blue Metallic
51 – Dark Red
59 – Dark Green
700 – Aztec Silver Metallic
21 – Tomato Red
(Accessories are field installed)
Description
HOUSE SIDE SHIELDS
FVR/FVM 2 HSS – House Side Shield
FVRPT/FVMPT 2 HSS – House Side Shield
FVR/FVM 3 HSS – House Side Shield
FVRPT/FVMPT 3 HSS – House Side Shield
FVR/FVM FP HSS – House Side Shield
FVRPT/FVMPT FP HSS – House Side Shield
FVR/FVRPT FA/AFT HSS – House Side Shield
4-5/16”
(110mm)
Project Name:
Location:
Date:
Fort Worth, TX 76110
5-3/8”
(137mm)
800.633.8711
8-7/8”
(225mm)
TYPE III AND FORWARD THROW (FA/FP/AFT)
TYPE II
Approved By:
1919 Windsor Place
2-5/16”
(59mm)
Fax: 817.735.4824
BOTTOM VIEW
www.wlslighting.com
FVR WITH INTERNAL
HOUSE SIDE SHIELD
5-3/8”
(137mm)
WLS LIGHTING SYSTEMS
WME SERIES
WALL SCONCE
SPECIFICATIONS
HOUSING - Aluminum housing is available in two sizes and is a rectangular shape. All
mounting hardware is stainless steel or electro-zinc plated steel.
WALL MOUNT - A galvanized-steel universal wall mounting plate easily mounts directly to a
4” octagonal or square junction box. An EPDM gasket is supplied to be installed between the
mounting plate and junction box from the entrance of water. The universal plate permits the
fixture to be mounted in the uplighting position (listed for damp locations) or downlighting
position (listed for wet locations).
LENS / GASKET - A flat clear tempered glass lens, which is sealed to the door frame with
Flat-lensed fixture
s
meet IESNA
full cutoff
classification.
DIMENSIONS
EPDM gasketing, is standard. An optional polycarbonate lens is available on most Compact
Fluorescent fixtures.
DOOR FRAME - The aluminum door frame with two stainless steel captive fasteners allows
easy access into the fixture. A one piece extruded silicone gasket seals the door frame against
the housing. The door swings open and is held in place by a retainer.
FINISHES - Fixtures are finished with WLS’s DuraGrip® polyester powder coat finishing
process. The DuraGrip® finish withstands extreme weather changes without cracking or
peeling, and is guaranteed for five
full years. Standard colors include bronze, black, platinum
REFLECTORS/DISTRIBUTION
PATTERNS
plus, graphite, metallic silver and white.
REFLECTORS / DISTRIBUTION PATTERNS - Forward Throw (FP,FPM) and Type III (3)
reflectors are available on small and medium. All are high performance, full cut-off distribution
as defined by the IESNA (downlight position only). Photometric data is tested in accordance
with IESNA guidelines.
A
D
LIGHT SOURCES - This fixture is designed to operate with horizontal Pulse Start Metal
o
30
C
Halide, Pulse Start Metal Halide Reduced, Natural White, Super Metal Halide, Super Metal
Halide Reduced, Metal Halide, Metal Halide Reduced, High Pressure Sodium, and single,
o
double or triple compact fluorescent lamps. Lamps
supplied as standard - HID (clear, ship
installed), andCompact Fluorescent (coated, 4100K shipped in separate carton).
(95mm)
3-3/4”
(70mm) (25mm) 1"
2-3/4"
Junction Box
Centerline
B
A
B
C
D
Small
(448mm)
(244mm)
(257mm)
(137mm)
17-5/8"
9-5/8"
10-1/8"
5-3/8"
Medium
(508mm)
(341mm)
(283mm)
(218mm)
20"
13-7/16"
11-5/32"
8-5/8"
SOCKETS - HID lampholders are glazed porcelain, medium base for the small fixture and
mogul base for the medium fixture, 4KV pulse rated. The Compact Fluorescent fixtures feature
a one-piece thermoplastic socket.
UNIVERSAL MOUNTING PLATE
BALLASTS - Electrical components are factory-mounted in housing and pre-wired with
voltage specific leads which extend out the back of the unit through a rubber grommet. This
grommet prevents the entry of insects, dust, and moisture into the fixture. The need to open
the fixture to make wiring connections is eliminated, making installation quick and easy. UL
listed components with high-power factor ballast rated for -20° F starting. Compact
Fluorescent ballasts are Electronic Universal Voltage (120-277V 50 / 60Hz) or 347V (60Hz), 0° F
starting. Consult factory for available wattages and voltages for use in Canada.
(145mm)
5-45/64"
(197mm) 7-3/4"
listed for wet locations
(downlight only)
damp location
(uplight-covered location only)
EMERGENCY OPERATION - A variety of integral emergency options are available to comply
with Life Safety Codes which require emergency lighting along the path of egress on the
buildings exterior, so building occupants can exit safely. (See Options in Ordering Information)
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 12/08
WME SERIES
WALL SCONCE
ORDERING INFORMATION
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Mounting
LAMP
SERIES
WME-S
WME-M
LIGHT
DISTRIBUTION WATTAGE
SOURCE*
LENS
FG - Flat Glass
Lens
LINE
LUMINAIRE
VOLTAGE
FINISH 2
3 - Type III
FP - Forward
Throw
WW - Wall Wash
50W
70W
100W
150W
HPS - High Pressure
Sodium (150)
CMH - Ceramic Metal
Halide
MH - Metal Halide
FTM - Forward
Throw
Medium
26W
32W
42W
FG - Flat Glass
CFL - Compact
Lens
Fluorescent Single
FPC - Flat Clear
CFL2 - Compact
Fluorescent Double Polycarbonate
UE - Universal
Electronic
(120-277V 50 / 60Hz)
347 3
3 - Type III
FP - Forward
Throw
250W
320W
400W
FG - Flat Glass
PSMH - Pulse Start
Lens
Metal Halide
(250, 320)
PSMHR - Pulse Start
Metal Halide
Reduced (400)
HPS - High Pressure
Sodium (250, 400)
120V
208V
240V
277V
347V
480V
320W
NW - Natural White
26W
32W
42W
57W
70W
FG - Flat Glass
UE - Universal
CFL - Compact
Lens
Electronic
Fluorescent Single
FPC - Flat Clear (120-277V 50 / 60Hz)
(57, 70)
Polycarbonate 1 347 3
CFL2 - Compact
Fluorescent Double
(57, 70)
CFL3 - Compact
Fluorescent Triple
(26, 32, 42)
WME-M
3
400
MH
FG
120V
208V
240V
277V
347V
120V
BRZ - Bronze
BLK - Black
GRY - Grey
WHT - White
RD - Red
MSV - Metallic
Silver
CC - Custom Color
OPTIONS
PC - Photocell
TP - Tamper Proof 4
PMA - Pole Mount Adaptor for use with square
poles (for S or D180°mounting configurations
only)
PMAR - Pole Mount Adaptor for use with round poles
(for S or D180° mounting configurations only)
DIM - CFL Control Voltage Dimming Ballast 5
C - Coated MH or PSMH lamp
SQT - Standby Quartz (Time Delay)
SQN - Standby Quartz (Non Time Delay) 6
EQ - Emergency Quartz (Separate 120V circuit - HID
only) 6
EQ2 - Two Emergency Quartz (Two separate 120V
circuits- HID only) 7
BB - CFL Battery Back-up 8
EM1 - One Emergency 12V Circuit Provision with 32W
Halogen Lamp 9
EM1LL - One Emergency 12V Circuit Provision -less
Halogen Lamp 9
EM2 - Two Emergency 12V Circuit Provisions with (2)
32W Halogen Lamps 9
EM2LL - Two Emergency 12V Circuit Provisions - less
Halogen Lamp 9
LL - Less Lamp
NO - No Options
ACCESSORIES
SF - Single Fusing
DF - Double Fusing
PSS - Polycarbonate Shield for WME-S
PSM - Polycarbonate Shield for WME-M
SW BLK - Surface Wiring Box
SCD - Tamper-proof Screwdriver
NA - No Accessories
BRZ
NO / NA
(EXAMPLE ORDER)
ORDER:
WLS-WMEFOOTNOTES:
COLOR DECALS
1 - If a polycarbonate lens is required on an Uplight Medium fixture in 70W CFL2 or 42W CFL3, the glass lens with polycarbonate shield must be ordered.
2 - For International voltages, consult factory.
3 - 347V CFL is not available with dimming ballast (DIM) option. Consult factory for battery back-up (BB) option.
4 - Tamper-proof Screwdriver must be ordered separately. ( See Accessories in Ordering Information)
5 - CFL Dimming Control by others.
6 - HID lamp wattages 50 and 70 are supplied with a 50 watt, 120V quartz lamp. HID lamp wattages 100 through 250 are supplied with a 100 watt, 120V
quartz lamp. HID lamp wattage 400 is supplied with a 250 watt, 120V quartz lamp.
7 - Available on 100 watt minimum HID fixtures. HID lamp wattages 100 through 175 are supplied with two 50 watt, 120V quartz lamps. 250 and 400 watt
HID fixtures are supplied with two 100 watt, 120V quartz lamps.
8 - Battery Back-up available on single, double and triple 120 or 277 voltage specific units for U.S. applications. Please change Line Voltage of UE to 120 or
277 when ordering this option. On double and triple units, one lamp will be energized by Battery Back-up (BB) option. Consult factory for specific Means
of Egress job application compliance.
9 - Utilizes GY6.35 socket(s). 12 volt separate circuit(s) required.
45 - Light Gold Metallic
20 - Charcoal Metallic
94 - Blue Metallic
59 - Dark Green
21 - Tomato Red
55 - Black
50 - White
51 - Dark Red
700 - Aztec Silver Metallic
* In accordance with the 2007 Energy Independance and Security Act (EISA), fixtures will no longer be avaiable in Probe Start Metal Halide with wattages
from 150 watts through 500 watts for new installations. Replacement parts for exisitng fixtures are still available.
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 11/11
WLS LIGHTING SYSTEMS
TOP O.D
RTS SERIES
ROUND TAPERED STEEL
SPECIFICATIONS
POLE SHAFT - Pole shaft is electro-welded ASTM-A595 Grade A steel tubing with a minimum
yield strength of 55,000 psi. On Tenon Mount steel poles, tenon is 2-3/8” O.D. high-strength
pipe. Tenon is 4-3/4“ in length.
HAND HOLE - Standard hand-hole location is 12” above pole base. Hand-hole size is 4“ X 6”
and reinforced.
BASE - Pole base is ASTM-A36 hot-rolled steel plate with a minimum yield strength of 36,000
psi. Two-piece square base cover is optional.
ANCHOR BOLTS - Poles are furnished with anchor bolts featuring zinc-plated double nuts
and washers. Galvanized anchor bolts are optional. Anchor bolts conform to ASTM-A36 with
a minimum yield strength of 36,000 psi.
GROUND LUGS - Ground lug is standard.
DUPLEX RECEPTACLE - Pole preparation for weatherproof duplex receptacle is optional.
GROUND FAULT CIRCUIT INTERRUPTER - Pole preparation for ground fault circuit
interrupter is optional.
REFLECTORS/DISTRIBUTION
PATTERNS
SHAFT
LENGTH
FINISHES - Each steel pole is finished with WLS DuraGrip® baked-on polyester powder coat
finishing process to give the pole an exceptionally attractive appearance. The process
electrostatically applies and thermally fuses a polyester powder to the pole. This unique
protection process provides an extremely smooth and uniform finish which withstands extreme
weather changes without cracking or peeling. DuraGrip® finish features a five-year limited
warranty. Standard finish colors available for poles are bronze, black, platinum plus, buff, white,
satin verde green, metallic silver, and graphite. Optional DuraGrip® Plus features added
protection with a 3.0 to 5.0 mil thickness of polyester-powder coat finish plus an inner coating.
This specially designed inner coating is a thermal plastic hydrocarbon resin applied to the
inside of the pole to seal and protect against atmospheric and corrosive matter. DuraGrip®
Plus finish features a seven-year limited warranty.
DETERMINING THE LUMINAIRE / POLE COMBINATION FOR YOUR APPLICATION
• Select luminaire from Luminaire Ordering Information.
• Select bracket configuration.
• Refer to Luminaire EPA chart to determine EPA value.
• Select height of pole.
• Select MPH to match the wind speed in the application area. (Windspeed Map located in appendix)
• Confirm the pole EPA that is equal to or exceeds the luminaire / bracket EPA as was previously
determined.
REINFORCED
HAND HOLE
BASE O.D.
ANCHOR BOLT
DIA.
BASEPLATE
(2) NUTS
(2) WASHERS
NOTE : 60' and 70' designs are available.
Contact WLS for specific design information.
LENGTH
HOOK
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 12/11
RTS SERIES
ROUND TAPERED STEEL
ORDERING INFORMATION
CATALOG
NUMBER
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Mounting
MOUNTING
CONFIGURATION
WLS-RTS-20-5.80-11
WLS-RTS-25-6.60-11
WLS-RTS-30-7.50-11
WLS-RTS-35-8.50-11
WLS-RTS-39-9.0-11
WLS-RTS-39-9.0-7
WLS-RTS-50-10.0-7
WLS-RTS-50-10.0-7
FINISH
TYPE
POLE TOP
S - Single / Parallel
D180° - Double
D90° - Double
DN90° - Double
T90° - Triple
TN120° - Triple
Q90° - Quad
QN90° - Quad
RTBO - Round Tapered
Pole for Bolt-On
Mount,
2-Bolt pattern
PT - Pole Top
RTP - Round Tapered Pole
for Pole Top Mount
N - Tenon Mount
(Standard tenon
size is 2-3/8” O.D.)
I - For use with
RTN - Round Tapered Pole
for Tenon Mount
FINISH
COLOR
PC - Powder
Coated
GV - Galvanized
GC - Galvanized
and Powder
Coated
BRZ - Bronze
BLK - Black
PLT - Platinum
Plus
BFF - Buff
WHT - White
SVG - Satin Verde
Green
GPT - Graphite
MSV - Metallic
Silver
PC
BRZ
OPTIONS
ACCESSORIES
GA - Galvanized Anchor Bolts
SF - Single Flood
DF - Double Flood
DGP - DuraGrip® Plus
LAB - Less Anchor Bolts
NO - No Options
SBC - Square Base Cover
ER2 - Weatherproof
Duplex Receptacle 2
GFI - Ground Fault
Circuit Interrupter 2
MHD - Mounting Hole
Weatherproof Decal
NA - No Accessories
(EXAMPLE ORDER)
WLS-RTS-30-7.50-11
Pole
Height
Base
Diameter
D90 °
STM
NO
NA
Gauge
ORDER:
WLS-RTSFOOTNOTES:
1 - Pole heights will have +/- 1/2” tolerance.
2 - Pole preparation only. Receptacle sold separately.
CATALOG
NUMBER
SHAFT
LENGTH
WLS-RTS-20-5.80-11
WLS-RTS-25-6.60-11
WLS-RTS-30-7.50-11
WLS-RTS-35-8.50-11
WLS-RTS-39-9.00-11
WLS-RTS-39-10.00-7
WLS-RTS-45-10.00-7
WLS-RTS-50-10.00-7
20’
25’
30’
35’
39’
39’
45’
50’
SHAFT
SIZE
BASE
PLATE
5.80” TO 3.0” 10-1/8” X 1”
6.60” TO 3.10” 10-1/8” X 1”
7.50” TO 3.30” 10-1/8” X 1”
8.50” TO 3.60” 12” X 1”
9.00” TO 3.54” 12” X 1”
9.00” TO 3.54” 12” X 1-1/4”
10.00” TO 3.95” 13-1/2” X 1-1/4”
10.00” TO 3.25” 13-1/2” X 1-1/4”
BOLT
CIRCLE
ANCHOR
BOLT SIZE
WT.
80 MPH
EPA
11”
11”
11”
12”
12”
12”
14”
14”
1” X 36”
1” X 36”
1” X 36”
1” X 36”
1” X 36”
1-1/4” X 42”
1-1/4” X 42”
1-1/4” X 42”
153
196
247
319
358
592
622
646
24.8
22.9
22.0
21.1
18.5
36.9
31.4
21.0
90 MPH 100 MPH
EPA
EPA
18.8
17.0
16.0
14.9
12.6
27.1
24.0
15.6
14.4
12.8
11.7
10.5
8.4
21.2
18.6
11.7
* 1.3 Gust Factor
EPA INFORMATION:
All WLS Lighting Systems’ poles are guaranteed to meet the EPA requirements listed. WLS Lighting Systems is not responsible if a pole order has a lower EPA rating than the
indicated wind-loading zone where the pole is located.
CAUTION:
This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole.
WLS Lighting Systems cannot accept responsibility for harm or damage caused in these situations.
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 12/11
WLS LIGHTING SYSTEMS
INSTALLATION OF
GLARE SHIELD
1. Position shield on housing as shown in
Figure 2 and mark drilling locations
through slotted holes in shield.
(See Figure 1.)
FIGURE 1
2. Remove shield and drill 1/2” dia. holes
through housing (4 places).
HOUSING
3. Insert well-nut unto each hole.
TYPE III AND
FORWARD THROW
GLARE SHIELD
4. Position and install glare shield using
1/4-20 screws and flat/lock washers.
5. Tighten screws
until snug.
DIMENSIONS
TYPE II GLARE SHIELD
NOTE: Glare shield should be placed on side
that will best block light from the area
REFLECTORS/DISTRIBUTION PATTERNS
to be shielded, and that will allow
maximum reflector performance.
FIGURE 2: SHIELD POSITIONING FOR MEDIUM AND LARGE FIXTURES
EDGE OF SHIELD
EVEN WITH EDGE
OF LENS OPENING
EDGE OF SHIELD
EVEN WITH EDGE
OF LENS OPENING
TYPE II
TYPE III AND FORWARD THROW (FA/FP)
FIGURE 3
Drawings below show location of shields for best performance of reflector. Whenever possible, glare shields should be
placed in the indicated positions. (See shaded areas.)
LARGE
MEDIUM
TYPE II
TYPE III
Approved By:
Project Name:
Location:
Date:
P.O. Box 100519
Fort Worth, TX 76185
Specifications subject to change without notice.
800.633.8711
TYPE FP
Fax: 817.735.4824
TYPE II
TYPE FA/FP
www.wlslighting.com
Rev. 4/09