Spec Sheet

advertisement
rocker switches
A
A4
NARROW BODY SWITCHES, 10A
Single Pole. Universal application, 10A at 12V DC single pole switches. Black plastic, snap-in mounting.
Silver contacts, copper blade terminals. To fit panel hole .550" x 1.125" (14.0 x 28.6mm). Circuit diagrams, see Section A8.
Angled actuators
Curved Actuators
To fit panels .020" through .250" (.5mm to 6.4mm).
Curved matte finish actuator. Fits panels .025" through .200"
(.64 to 5.2mm). Three blade terminals.
54000-03* SPST On-Off,
Horizontal mount
54007* On-On Two color actuator
Rocker with black face, red edge
that shows in the On position.
Can also be used as an On-Off
by isolating terminal 3.
Black actuator, Left: On,
Right: Off, imprinted “On, Off”.
Two blade terminals.
54001-02* SPDT On-Off-On
White actuator, Up: On, Center: Off, Down: On.
Three blade terminals.
54008* Off-On Orange lighted
Orange rocker, lighted in On position. Similar to 54012, but
with Orange actuator
54003 SPST On-Off,
lighted red BP
54010 On-On
Red lighted actuator, Up: On,
Down: Off. Three blade terminals.
BP
Black rocker. Can also be used
as an On-Off by ignoring and
isolating terminal 1 or 3.
54003-01 SPST On-Off,
lighted amber
54012 Off-On Red lighted
Amber lighted actuator, Up: On,
Down: Off, Three blade terminals.
Red rocker,
lighted in On position.
54003-02* SPST On-Off, lighted green
Green lighted actuator, Up: On, Down: Off. Three blade terminals.
54004* SPST Off- Mom On
White actuator, Up: On, Down: Off. Two blade terminals.
rocker switches
A5
BRACKET-MOUNTING SWITCHES, 25A
Designed for use with customized faceplates. Heavy duty, 25A at 12V DC. Plated steel brackets fit panels .040" through .100"
(1.0 to 2.5mm) thick. Bracket mounting holes are bossed and tapped to take 6-32 UNC-2A mounting screws or
to clear .16" (4.1mm) diameter screws. Silver contacts, screw or blade terminals. White actuator except 58005. Switches with
pilot lights have white actuators with red dependent pilot light.
Without Pilot Light
57002* SPDT On-On
Three blade terminals
57008* DPDT On-On-Off
Five blade terminals. Can be used as a Headlamp Switch: Off - On
(battery, tail lights, park lamps) – On (battery, tail lights, headlamps).
SPST On-Off with Red Pilot Light
56300 Three screw terminals
Diagram F.
58005* SPDT Off-On- Mom Off
57300 Three blade terminals
Two screw terminals. Black actuator. Can be used as a
signaling switch.
Diagram F.
Rapid ship item.
BP
Available in retail clamshell pack.
*
Minimum order quantity may apply.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467
10
T 617.268.2100 F 617.268.9490 www.colehersee.com
rocker switches
A8
A
WIRING DIAGRAMS
SP&DP Switches with 6 Terminal Locations
Switches with One Pilot Light
Diagrams represent both momentary contact or maintained
contact switches.
SPST Off-On, dependent
Switches without Pilot Lights
Dependent illumination.
Three terminals.
SPST Off-On
4
+
B
2
3
L
Two terminals.
4
B
+
B
+
1
Diagram F
2
SPST Off-On, independent
3
L
Independent illumination. Four terminals.To convert an independent switch into dependent, connect a jumper wire from
terminal 3 to terminal 6, and connect terminal 4 to ground.
3
L
Diagram A
Diagram A1
SPDT On-Off-On
4
4
Three terminals.
1
L1
B
B
+
+
2
L
3
B
+
2
2
6
3
L
6
3
L2
Jumper
Diagram B
Diagram G1
Independent illumination
DPST Off-On
Four terminals.
Switches with Two Pilot Lights
B
B
+
Diagram G2
Independent illumination
switch converted to dependent
2
5
+
+
1
+
4
SPST Off-On,
dependent &
independent
B
B
Four terminals.
L1
3
6
L2
L
3
4
B
+
2
L
6
3
L
Diagram C
6
Diagram C1
Diagram H
DPDT On-On
Six terminals.
L1
B
+
L2
1
4
2
5
3
6
L3
+
L1
Four terminals.
B
SPDT On-Off-On,
or On-On, independent
B
+
4
2
5
3
6
L3
+
4
2
3
Diagram J
Four terminals.
1
+
L4
DPDT On-Off-On
L1
1
L2
B
Diagram D
Six terminals.
SPDT On-Off-On,
or On-On, dependent
L1
B
L2
1
4
2
5
3
6
+
B
Diagram K
L2
L4
Diagram E
CONTINUED A8
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467
13
T 617.268.2100 F 617.268.9490 www.colehersee.com
rocker switches
A
A8
WIRING DIAGRAMS
SP&DP Switches with 8 Terminal Locations
Some switches have a maximum of eight possible locations for
terminals. Switches of this type include M-58031 Series and
58326 Series in Section A1. Diagrams represent both momentary
contact or maintained contact switches.
L
B
B
+
+
L
8
1
4
2
5
3
6
L
+
B
L
7
Diagram P
5
+
B
L
6
Diagram L
B
B
+
8
7
2
5
3
6
+
2
3
L
Diagram Q
B
+
L
+
B
L
Diagram M
L
B
B
+
8
1
+
7
2
3
L
Diagram R
B
+
2
3
L
Diagram N
5
B
+
L
B
L
+
L
4
+
L
6
8
7
1
4
2
5
3
6
Diagram S
L
+
B
B
L
Diagram O
B
L
+
2
5
3
6
+
B
L
Diagram T
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467
14
T 617.268.2100 F 617.268.9490 www.colehersee.com
rocker switches
A8
A
WIRING DIAGRAMS
How to Identify a 6-terminal switch
You can find out the type of rocker or toggle switch by
a quick visual inspection.
Look at the back of the switch, where the terminals are.
Notice that there are six possible terminal positions.
rotary
Toggle and rocker switches are designed so that each vertical
set of terminals makes up one pole.
Pole 1
Our new 72150 Series Rotary Switches have many of the
electrical configurations that are available in rocker switches:
SP/DP; single-, double-, triple-, and quadruple-throw; illuminated or not; momentary/maintained; imprinted or not; and
with a choice of knob styles. Compact, with a durable Nylon
6/6 body. IP-53. 10A and 20A. Check them out in section N1.
Pole 2
1
4
2
5
3
6
You can see immediately that a switch with three verticallyorganized terminals must be a SPDT. Now check the actuator
(rocker or toggle handle) to see if the switch is 2-position
or 3-position.
3- and 4-way lighting
3-way lighting permits a light (or set of lights) to be
controlled from either one of two switches usually mounted in
different locations. Similarly, 4-way lighting enables control
from three switch locations.
If it only has two terminals, it must be a SPST, the simplest
of all switch configurations. Notice that the two terminals are
organized vertically (never side-by-side). Terminals can be
located at 1 and 2, 1 and 3, or 2 and 3.
3-WAY LIGHTING
If it has terminals at 1, 3, 4 and 6, it must be a DPST. You can
see that it utilizes the left side (pole 1) and right side (pole 2)
of the switch — two poles (DP).
1
B
If it has six terminals, it’s a DPDT. Check the actuator to see
if the switch is 2-position or 3-position.
1
+
2
2
3
3
Use two SPDT On-On switches
such as 58328-16 or 58027-05
4-WAY LIGHTING
1
SPST
DPST
SPDT
DPDT
B
+
1
3
2
1
6
5
4
2
2
3
3
58328-16
or
58027-05
58027-08
DPDT.
Add Jumper.
58328-16
or
58027-05
For explanation of SPST, DPST, SPDT, DPDT, see Section B10.
Rapid ship item.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467
15
BP
Available in retail clamshell pack.
*
Minimum order quantity may apply.
T 617.268.2100 F 617.268.9490 www.colehersee.com
Download