12/16 Watt Cabin Light Assembly
CL12/16W Series
Product Description
The CL12Wxx-xx and CL16Wxx-xx are halogen reading lights
that contain an internal fan for cooling purposes. The brilliant
halogen bulb delivers maximum color-correct illumination with the
beam specially focused for even light intensity and comfortable
viewing.
Specific model numbers and their descriptions can be
interpreted as follows:
Model No.
CL
12 or 16 W
1 or 2
0, 5
-12, -32
-22
-11, -21, -31,
-51, -61
-71
-33
-53, -63, -73
-4, -5
Description
Stands for cabin lighting
Indicates the wattage of bulb
Indicates the mounting type:
#1 for square mount, #2 for round mount
Indicates trim ring status: #0 indicates no
trim ring, #5 indicates with trim ring
Indicates models supplied with a 3-pin
amp receptacle #350767-1
Indicates models supplied with a 5-pin
amp receptacle #350547-1
Indicates models supplied with a
DEMA-9P connector & female screwlock
Indicates models supplied with a
DEMA-9M connector
Indicates models supplied with a 2-pin
amp plug #1-640507
Indicates modes supplied with a 6-pin
amp plug #1-640510-0 w/640545-2 pins
connector
Indicates models supplied with no
connector
Application Notes:
Configuration
-11
-12
-21
-22
-31
-32
-33
-51
-53
-61
-63
Example:
Trim ring option
Connector description
CL xx W x
-71
x - xx
Mounting type (1=square, 2=round)
12 or 16 watt
-73
Lighting Option
Single button on / off control and dimmer
Single button on / off control and dimmer
On / off control and separate dimmer
On / off control and separate dimmer
On / off only with amp connector
On / off only with amp connector
On / off only
2-button bright / dim (unit powers up at
minimum brightness)
2-button bright / dim (unit powers up at
minimum brightness)
Single button on / off and dimmer
Single button on / off and dimmer
2-button bright / dim (unit powers up at
mid-intensity point).
2-button bright / dim (unit powers up at
mid-intensity point).
All lights feature thermal cut-off protection.
Features:
The following list provides an overview of features for the
CL12/16 W Series Cabin Light:
Installation Notes:
q
q
q
q
q
q
q
1.
Self-contained bright/dim electronics
Simple on/off or on/off with dimming
Square or round mount available
Raised trim ring for easy grip positioning available
Internal cooling fan
Forty-two degree swivel range provides approximately 1.5
inch circle of beam
Bulb replacement kit available
2.
3.
4.
The CL12/16 W series may be ordered with or without
connectors and trim ring. Refer to Product Description for
model number clarification.
Ensure all power and ground wires are 20 AWG, MINIMUM.
Protect power wires with circuit breakers or fuses located
close to the electrical power source bus.
Ensure that power and ground are applied only where
required.
Drawing
520368 Rev F
Description
CL 12/16 W-xx Outline Drawing
Technical Specifications
Electrical
Power
Bulb Power
Emergency Power
Mechanical
Dimensions
(Depth x Width)
Weight
+28 VDC nominal
12W = <500mA
16W = <600mA
12 or 16 watts
Input +6.3 VDC
Override to full “on”,
+28 VDC active
2.42" x 2.63"
6.15cm x 6.60cm
0.38 lb / 0.17 kg
Level
IR
A
Document # 530221A
Date
12/1999
4/2000
– Revision History
Description
Initial Release
ECN # 4618
PROPRIETARY NOTICE
Despite any copyright notice, this data and information
disclosed herein contains confidential, proprietary designs owned
by Audio International, Incorporated. Neither this data nor the data
contained herein shall be reproduced, used, or disclosed to
anyone without the written authorization of Audio International, Inc.
Audio International, Inc. • 7300 Industry Drive, North Little Rock, AR 72117 • Phone 501-955-2929 / Fax 501-955-2988 / www.audiointl.com