PUBLIC ADDRESS SYSTEMS
Fire Protection &
Commercial Power
Amplifiers
6000-AMP Series
FEATURES
> Made in USA
Edwards Power Amplifiers are rated at either 60, 125 or 250 Watts
> Broad frequency response
(RMS) and mount into standard 19-inch (48.3 cm) wide equipment
racks. All Edwards amplifiers are UL 813 Listed and can be used in
> Low distortion
> 60, 125 & 250 watt output
models
> Fire protection signaling models
AGENCY APPROVALS
> UL 813 Listed for Commercial
Sound
> 125 & 250 watt Fire Protection
Models UL 1711 Listed
sound reinforcement, general paging, as well as commercial and
industrial communication systems applications.
The 6000-125AMP-FP and the 6000-250AMP-FP provide either a
continuous 125 Watt or 250 Watt output with the ability to automatically switch to battery operation in the event of a line voltage reduction or power failure. Patented circuitry allows instantaneously
switching in and out of battery operation while still maintaining
state-of-the-art performance.
The 6000-125AMP-FP and the 6000-250AMP-FP have been verified
by Underwriters Laboratories to meet the UL Standard 1711 requirement for 250 hours of continuous full-power operation. They are ide-
SPECIFICATIONS
ally suited for any fire alarm or life safety system that requires a UL
> 120 V AC 60 Hz power source
1711 Listed amplifier.
> Charcoal baked enamel finish
For 42" wall cabinet mounting, order Cat. No. 6000-MR-42; for 21"
> Screw terminations with barriers
on output terminals
wall cabinet mounting, order Cat. No. 6000-MR-21.
17-4
D-04
> Output regulation better than 1dB,
no load to full load
90 Fieldstone Court |
Ph: 203.699.3300 |
Cheshire, CT 06410
Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUBLIC ADDRESS SYSTEMS
TECHNICAL INFORMATION
C
B
A
Power Output
(RMS)
Frequency
Response
Input
Inpedance
AC Power
Requirements
DC Power
Requirements
6000-60AMP
60 watts
20 Hz to
20 KHz
20K ohms
120V AC, 1.4A
at rated output,
0.18A standby
N/A
5 1/4" 19" 6 1/4"
(133) (483) (159)
6000-125AMP
125 watts
20 Hz to
20 KHz
20K ohms
120V AC, 2.8A
at rated output,
0.22A standby
N/A
5 1/4" 19" 6 1/4"
(133) (483) (159)
6000-125AMP-FP
125 watts
20 Hz to
20 KHz
75K ohms
120V AC, 3.0A
at rated output,
0.3A standby
24V DC, 11.5A
at rated output,
1.2A standby
5 1/4" 19" 6 5/8"
(133) (483) (168)
6000-250AMP
250 watts
20 Hz to
20 KHz
20K ohms
120V AC, 4.9A
at rated output,
0.27A standby
N/A
5 1/4" 19"
13"
(133) (483) (330)
6000-250AMP-FP
250 watts
20 Hz to
20 KHz
75K ohms
120V AC, 5.8A
at rated output,
0.3A standby
24V DC, 23.0A
at rated output,
2.4A standby
5 1/4" 19"
15"
(133) (483) (381)
Cat. No.
A
Dimensions
B
C
D-04
90 Fieldstone Court |
Ph: 203.699.3300 |
Cheshire, CT 06410
Fx: 203.699.3108
www.edwards-signals.com
17-5
© Copyright 2004 Edwards