Vacuum Flow Series ZH--X185 By supplying compressed air, RoHS Large blow and vacuum flow rate available A blow flow rate 4 times the supply air A discharge flow rate 4 times the supply air can be generated. Contributes to reduction in flow consumption if discharge requires flow rate. 4x Discharge A vacuum flow rate Suction 3x Supply air Supply air Large passage diameter available for suction of machining chips, particles, etc. Flow direction 4 passage diameters available Mounting bracket available Maintenance free No regular motor maintenance is necessary compared with an electric blower. Application Examples Blow Blowing away water droplets Vacuum Vacuuming the smoke during soldering Blowing away machining chips Transferring ∗ Transferring materials such as pellets or fine particles 1398 3 times the supply air A suction flow rate 3 times the supply air can be generated. Contributes to reduction in flow consumption if suction requires flow rate. Vacuum Flow ZH--X185 Series RoHS How to Order ZH 20 B X185 Passage diameter Symbol 10 20 30 40 Bracket mmø Nil Without bracket 13 B With bracket 21.6 30 42 Warning 1. Because suctioned matter is ejected together with exhaust, do not direct an exhaust port at a person or equipment. Specifications Model Body material Seal material Passage diameter Fluid Supply pressure range Weight (g) Bracket assembly 2. Do not use in an atmosphere having corrosive gases, chemicals, sea water, water steam, or where there is direct contact with any of these. Refer to front matter 53 for Safety Instructions and pages 899 to 901 for Vacuum Equipment Precautions. ZH10-X185 ø13 110 ZH-BK1-10-A ZH20-X185 ZH30-X185 ZH40-X185 Aluminum alloy NBR ø21.6 ø30 Air 0 to 0.7 MPa 430 970 ZH-BK1-20-A ZH-BK1-30-A ø42 2000 ZH-BK1-40-A Flow Characteristics ZH20-X185 ---6 700 Discharge flow rate Vacuum pressure ---5 500 ---4 400 Suction flow rate ---3 300 ---2 200 ---1 100 Air consumption 0.1 0.2 0.3 0.4 0.5 1,800 1,600 ---6 Discharge flow rate ---5 1,200 ---4 ---2 400 0 0.0 0.1 0.2 0.3 0.4 0.5 0 0.6 ZH40-X185 ---7 ---7 ---5 ---4 Vacuum pressure Suction flow rate 2,500 2,000 ---3 1,500 ---2 1,000 ---1 Air consumption 0.2 0.3 0.4 Supply pressure [MPa] 0.5 500 0 0.6 4,500 Discharge flow rate Vacuum pressure ---5 4,000 3,500 3,000 ---4 Suction flow rate ---3 2,500 2,000 1,500 ---2 ---1 0 0.0 SP 5,000 ---6 Vacuum pressure [kPa] 3,000 Discharge flow rate Suction flow rate [L/min (ANR)] Note 1) Air consumption [L/min (ANR)] Discharge flow rate [L/min (ANR)] 3,500 ---6 Vacuum pressure [kPa] 200 Air consumption Supply pressure [MPa] ZH30-X185 0.1 800 600 Supply pressure [MPa] 0 0.0 1,000 Suction flow rate ---3 ---1 0 0.6 1,400 Vacuum pressure Air consumption 0.1 0.2 0.3 0.4 0.5 1,000 500 Suction flow rate [L/min (ANR)] Note 1) Air consumption [L/min (ANR)] Discharge flow rate [L/min (ANR)] 0 0.0 600 ---7 Suction flow rate [L/min (ANR)] Note 1) Air consumption [L/min (ANR)] Discharge flow rate [L/min (ANR)] 800 Vacuum pressure [kPa] ---7 Suction flow rate [L/min (ANR)] Note 1) Air consumption [L/min (ANR)] Discharge flow rate [L/min (ANR)] Vacuum pressure [kPa] ZH10-X185 0 0.6 Supply pressure [MPa] Note 1) Suction flow rate is a theoretical value. Note 2) The above characteristics are when the discharge outlet is under atmospheric pressure. Note 3) Back pressure should be avoided if you mount a filter or some devices to catch the suctioned particles on the suction outlet side of this product. 1399 ZCUK AMJ AMV ZH -X185 Related Equipment Series ZH --X185 Dimensions Flu ZH10 to 20--X185 id pa ag ss Without bracket ed Air pressure supply (P) port Thread size: Q :P ia. K J R Note 1) H 2 I x N A M F E Suction air Note 1) Do not use this thread portion for mounting. Discharge air øC øC D øB 4 x Sa Thread depth Sb O L G (mm) A Model ZH10--X185 73 ZH20--X185 119.5 øB 34 øC 19 D E F G H 10 13.2 16.2 69.8 31 55 32 15 19.5 23.5 111 I 4 48 J K L M N 35 27 4.5 35 18 56 48 4.5 56.5 29 O P Q R Sa Sb Rc1/8 28 M3 x 0.5 5 21.6 Rc1/4 44 M4 x 0.7 8 13 1 ZH30 to 40--X185 Without bracket Air pressure supply (P) port Thread size: Q 45° 45° .: P e dia sag as id p R K J Flu H 2x I O L G M A F E D Suction air øC Discharge air øC øB 4 x Sa Thread depth Sb N Note 1) Do not use this thread portion for mounting. Note 1) (mm) Model A ZH30--X185 158 ZH40--X185 203 1400 øB 70 øC 50 D E F G H I J K L M N O P Q R 20 24.5 28.5 146.5 60.5 5 70 60 5.5 72 37 2 30 Rc1/4 59 90 64 25 27.2 33.5 196.8 74.5 6 90 78 6.5 92 47 2.3 42 Rc3/8 76 Sa Sb M4 x 0.7 10