Dimensional details Accessories for Tmax T7 Fixed circuit-breaker Rotary handle operating mechanism on the circuit-breaker 4 poles 1 Rotary handle operating mechanism for circuit-breaker 2 Compartment door interlock 3 Flange for the compartment door 4 Flange fixing screws 6 Support sheet drilling template 7 Key lock (optional) 8 Tightening torque: 2 Nm 9 Compartment door with flange sheet drilling 3 poles 1SDC210L50F0001 Caption 10 Compartment door sheet drilling for front 206 x 204 11 Terminal for auxiliary contacts 12 Reduced flange of the rotary handle for the compartment door (optional) 13 Compartment door sheet drilling for rotary handle Without flange A 125...141 147 III IV C 70 140 Drilling templates for support sheet 1SDC210L66F0001 Flange for the compartment door (supplied as standard) MCCBs 1SDC210L66F0001 14 Compartment door sheet drilling without the rotary handle flange With flange 1SDC210L51F0001 Drilling templates of the compartment door HOLES 7/145 1SDC007200C0202 0701_Tmax.indb 145 1-12-2006 16:17:52 Dimensional details Accessories for Tmax T7 Withdrawable circuit-breaker Rotary handle operating mechanism on the compartment door 4 poles 3 poles Isolating distance Horizontal rear terminal Drilling templates of the compartment door Vertical rear terminal Legenda 1 Rotary handle operating mechanism on circuit-breakers 2 Rear segregation for rear terminals 4 Flange fixing screws 6 Drilling template for fixing onto support sheet 7 Key lock (optional) 8 Tightening torque: 8 Nm 9 Compartment door with flange sheet drilling III IV A 160 230 B 206 276 10 Front terminals C 219 289 11 Rear horizontal terminals 12 Rear vertical terminals 13 Rear segregation for front terminals Drilling templates for support sheet 14 Flange for the compartment door 15 Auxiliary contact terminal 7/146 1SDC007200C0202 0701_Tmax.indb 146 1-12-2006 16:17:54 Dimensional details Accessories for Tmax T7 Caption Mechanical vertical interlock for fixed circuit-breakers 4 Mechanical horizontal interlock for fixed circuit-breakers 5 Sheet drilling for wire passage of the mechanical interlock MCCBs 3 Mechanical interlock for fixed circuit-breakers 7/147 1SDC007200C0202 0701_Tmax.indb 147 1-12-2006 16:17:56 Dimensional details Accessories for Tmax T7 Legenda 1 Mechanical vertical interlock for withdrawable circuit-breakers 2 Mechanical horizontal interlock for withdrawable circuitbreakers 5 Sheet drilling for wire passage of the mechanical interlock Mechanical interlock for withdrawable circuit-breakers 7/148 1SDC007200C0202 0701_Tmax.indb 148 1-12-2006 16:17:57 Dimensional details Distances to be respected Insulation distances for installation in metallic cubicle A B C (mm) (mm) (mm) T1 25 20 20 T2 25 20 20 T3 50 25 20 T4 30(*) 25 25(*) T5 30(*) 25 25(*) T6 35(*) 25 20 T7 50(*) 20 10 (*) 1SDC210L37F0001 For Ub ≥ 440 V and T6L all versions: distances A ⇒ 100 mm Note: For the insulation distances of the 1000 V circuit-breakers, please ask ABB SACE. Minimum centre distance between two circuit-breakers side by side or superimposed For assembly side by side or superimposed, check that the connection busbars or cables do not reduce the air insulation distance Minimum centre distance for two circuit-breakers side by side 4 poles 3 poles 4 poles T1 76 102 76 102 T2 90 120 90 120 T3 105 140 105 140 T4 105 140 105 140 T5 140 184 140 184 T6 210 280 210 280 T7 210 280 210 280 (*) MCCBs Centre distance I (mm) 3 poles 1SDC210L38F0001 Circuit-breaker width (mm) For Ub: ≥ 500 V minimum centre I (mm) 3 poles 180, minimum centre I (mm) 4 poles 224 Minimum centre distance for superimposed circuit-breakers H (mm) T1 60 T2 90 T3 140 T4 160 T5 160 T6 180 T7 180 1 Connection - not insulated 2 Insulated cable 3 Cable terminal Note: The dimensions shown apply for operating voltage Ub up to 690 V. The dimensions to be respected must be added to the maximum dimensions of the various different versions of the circuit-breakers, including the terminals. For 1000 V versions, please ask ABB. 1SDC210L39F0001 Caption 7/149 1SDC007200C0202 0701_Tmax.indb 149 1-12-2006 16:17:57