WLS LIGHTING SYSTEMS UMC SERIES DECORATIVE LED SPECIFICATIONS HOUSING - The driver compartments shall be one-piece die cast aluminum. The luminous rings shall be clear acrylic with an internal lens. The hood and spacers shall be heavy gauge and spun aluminum with hemmed edges for added rigidity. The hood wing assembly shall be fully sealed with a molded silicone gasket. All internal and external hardware shall be stainless steel. The hood wing assembly shall be fully sealed with a molded silicone gasket. the UMC is BUG rated OPTICAL - All optical systems shall provide IES Types II, III, IV, V, Custom, distributions. Standard color temperatures shall be 2700K, 3000K, 3500K, 4000K, 5100K, and Amber. LUMINAIRE PERFORMANCE 3K Secondary Lens or Shield Distribution Delivered Lumens Efficacy (lm/w) No Lens (Standard) TYPE 2 TYPE 3 TYPE 4 TYPE 5 6186 6168 6081 6227 87 87 86 88 Drive Bug Current Rating (ma) B U G 2 0 2 1 0 2 1 0 2 650 3 0 2 House Side Shield TYPE 4 4495 63 0 0 2 No Lens (Standard) TYPE 2 TYPE 3 TYPE 4 TYPE 5 4607 4570 4570 4602 98 95 97 98 2 1 1 3 House Side Shield TYPE 4 3366 72 0 0 2 Secondary Lens or Shield Distribution No Lens (Standard) TYPE 2 TYPE 3 TYPE 4 TYPE 5 House Side Shield TYPE 4 No Lens (Standard) TYPE 2 TYPE 3 TYPE 4 TYPE 5 House Side Shield TYPE 4 3529 4K 0 0 0 0 2 1 2 1 450 System Watts 71 47 UMC offers MicroCore LED modules that independently aim each LED in both horizontal rotation and vertical tilt angle. LEDs shall be mounted to a metal printed circuit board assembly (PCBA) with a uniform conformal coating over the panel surface and electrical features. LED optics shall be clear injection molded PMMA acrylic. MicroCore PCBA and optic shall be sealed to a die-cast anodized aluminum heat sink with an injection molded silicone rubber gasket. IP66. Type 4 distribution with optional House Side Shield not available with clear or diffused glass lenses. Factory installed House Side Shield is optimized for Type 4 distribution and not recommended for use with Type 2 or 3 distribution and not available with type 5 distribution. ELECTRICAL - All luminaries shall accept 120 thru 277 volt input with integral surge protection that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of 372J. Drivers shall be U.L recognized with an inrush current maximum of <20.0 Amps maximum at 230VAC. Drivers shall not be compatible with current sourcing dimmers, consult WLS for current list of known compatible dimming systems. MOUNTING - The fixture shall be attached to the arm assembly with three stainless steel bolts. 92 92 91 93 Drive System Bug Current Watts Rating (ma) B U G 2 0 2 1 0 2 1 0 2 650 71 3 0 2 4768 67 0 0 2 4830 4791 4791 4825 103 100 102 103 2 1 1 3 FINISH - Fixture finish consists of a five stage pretreatment regimen with a polymer primer 75 0 0 2 Delivered Efficacy Lumens (lm/w) 6561 6542 6449 6505 0 0 0 0 2 2 2 1 5K Secondary Lens or Shield Distribution No Lens (Standard) TYPE 2 TYPE 3 TYPE 4 TYPE 5 House Side Shield TYPE 4 4781 67 0 0 2 No Lens (Standard) TYPE 2 TYPE 3 TYPE 4 TYPE 5 4844 4805 4805 4839 101 101 100 101 2 1 1 3 0 0 0 0 2 2 2 1 House Side Shield TYPE 4 3539 74 0 0 2 Delivered Efficacy Lumens (lm/w) 6579 6560 6467 6623 92 92 91 93 Bug Rating B 2 1 1 3 U 0 0 0 0 G 2 2 2 2 450 47 Drive System Current Watts (ma) 650 71 450 47 The connection shall be sealed with a silicone gasket. Post top arms and brackets shall slip over a 4"/100mm O.D. or a 5”/127mm as configured and secured with six stainless steel set screws. Wall mounted arms and brackets shall require mounting hardware by others. sealer, oven dry off and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which included passing a 3000 hour salt spray test for corrosion resistance. CERTIFICATION - Listed with ETL for outdoor, wet location use. Conforms to UL1598 and Canadian CSA Std.C22.2 no.250 standard. Micro Core Optical arrays shall be constructed to IP66 standards. DLC Qualified Approved By: Project Name: Location: Date: 1919 Windsor Place Fort Worth, TX 76110 Specifications subject to change without notice. 800.633.8711 Fax: 817.735.4824 www.wlslighting.com 40 Rev. 5/16 UMC SERIES DECORATIVE LED ORDERING INFORMATION SERIES NO LUMINOUS UMC - Without luminous element LUMINOUS UMC-WND - Luminous Window UMC-SR - Luminous Solid Rings UMC-VSL - Luminous Vertical Slots UMC-LUM - Luminous Rings SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below. Mounting HOOD DISTRIBUTION FLR - Flared Hood FLR-STS - Flared Hood, natural brushed stainless steel FLR-COP - Flared Hood, natural brushed copper ANG - Angled Hood, ANG-STS - Angled Hood, natural brushed stainless steel ANG-COP - Angled Hood, natural brushed copper STR - Straigh Hood, STR-STS - Straigh Hood, natural brushed stainless steel STR-COP - Straigh Hood, natural brushed copper BEL - Bell Hood, BEL-STS - Bell Hood, natural brushed stainless steel BEL-COP - Bell Hood, natural brushed copper SKB - Skirted Bell Hood, SKB-STS - Skirted Bell Hood, natural brushed stainless steel SKB-COP - Skirted Bell Hood, natural brushed copper T2-32LED - Type II T3-32LED- Type III T4-32LED - Type IV T5-32LED - Type V TX-32LED - Custom ¹ COLOR TEMP LUMEN PACK VOLTAGE MOUNTING 27K - 2700K ¹ 3K - 3000K¹ 35K - 3500K 4K - 4200K 5K - 5100K AM - >580 nm monochromatic amber ¹ 700 - 71 watts 450 - 48 watts XMA - Custom wattage or drive current ¹ WH - Arctic White BL - Black BLT - Matte Black DGN - Dark Green DB - Dark Bronze TT - Titanium WDB - Weathered Bronze MDB - Metallic Bronze VBU - Verde Blue CRT - Corten MAL - Matte Aluminum MG - Medium Grey AGN - Antique Green LG - Light Grey RAL - Premium Color (Provide RAL) CC - Custom Color, consult factory FINISH FTG - Clear flat glass lens ² SAG - Clear sag glass lens ¹,³ HSS - House side shield, for Type IV SLC - Unlit (luminous) element FLD - Lightly diffused finish on flat glass ³ lens R80 - 80 CRI, minimum¹ BL - Blue inner lens RD - Red inner lens GRN - Green inner lens SCP - Integral photocontrol and motion sensor 4 SCPRM - Handheld commissioning tool 4 OPTIONS UE - Universal Voltage (120-277) 347 - 347VAC 480 - 480 VAC PM - Pole Mount SLA2 SLA4 SLA7(5) SLA8D SLA9-2 SLA10-2 SLA16-2 SLA17-2 SLA17(5)-2 SLA18-2 SLA20-2 SLA20A-2 SLA20B-2 SLA20C-2 SLA20D-2 SLA24 SLA24(5) TRA4 TRA7-2 TRA8-2 TRA9-2 SLA3 SLA4-2 SLA7-2 SLA7(5)-2 SLA9 SLA10 SLA16 SLA17 SLA17(5) SLA18 SLA20 SLA20A SLA20B SLA20C SLA20D SLA22D SLA24-2 SLA25(5)-2 TRA7 TRA8 TRA9 WM - Wall Mount WMA4 WMA6 WMA9D WMA11 WMA16 WMA18 WMA22D WMA37 WMA39 WMA5 WMA8 WMA10 WMA12 WMA17 WMA20 WMA24 WMA38 *Info on Page 4 27K 700 MTB BL-SCP UE FOOTNOTES: 1 - Contact Factory 2 - Not for AM color temperature 3 - Not for SCP contol options 4 - Handheld commissioning tool is required to seperatly configure or adjust any number of SCP sensors UMC-LUM ANG T5-32LED PM-SLA2 (EXAMPLE ORDER) ORDER: WLS-UMC Approved By: Project Name: Location: Date: 1919 Windsor Place Fort Worth, TX 76110 Specifications subject to change without notice. 800.633.8711 Fax: 817.735.4824 www.wlslighting.com 40 Rev. 5/16 UMC SERIES DECORATIVE LED ANGLED HOOD CONFIGURATION DIAMETER HEIGHT WEIGHT EPA UMC-ANG 20"/508mm 14.7"/373mm 18.25 lbs/8.28kg .60 UMC-WND-ANG 20"/508mm 20.5"/520mm 21.75 lbs/9.86kg .72 UMC-SR-ANG 20"/508mm 20.7"/526mm 25 lbs/11.3kg .74 UMC-VSL-ANG 20"/508mm 20.5"/521mm 22.25 lbs/10.1kg .72 UMC-LUM-ANG 20"/508mm 20.6"/523mm 24.25 lbs/11kg .74 BELL HOOD CONFIGURATION DIAMETER HEIGHT WEIGHT EPA UMC-BEL 24"/610mm 15.8"/401mm 20.25 lbs/9.2kg .73 UMC-WND-BEL 24"/610mm 21.4"/543mm 23.5 lbs/10.6kg .85 UMC-SR-BEL 24"/610mm 21.6"/549mm 27 lbs/12.25kg .87 UMC-VSL-BEL 24"/610mm 19.37"/492mm 24.25 lbs/11kg .85 UMC-LUM-BEL 24"/610mm 21.5"/546mm 26 lbs/11.8kg .85 FLARE HOOD CONFIGURATION DIAMETER HEIGHT WEIGHT EPA UMC-FLR 22"/559mm 14.5"/368mm 18.5 lbs/8.4kg .53 UMC-WND-FLR 22"/559mm 19.8"/503mm 21.75 lbs/9.87kg .65 UMC-SR-FLR 22"/559mm 20.1"/510mm 25.25 lbs/10.1kg .67 UMC-VSL-FLR 22"/559mm 19.8"/503mm 21.75 lbs/9.86kg .65 UMC-LUM-FLR 22"/559mm 20"/508mm 24.25 lbs/11kg .67 STRAIGHT HOOD CONFIGURATION DIAMETER HEIGHT WEIGHT EPA UMC-STR 24"/610mm 14"/355mm 20 lbs/9.07kg .59 UMC-WND-STR 24"/610mm 19.8"/503mm 23.25 lbs/10.55kg .71 UMC-SR-STR 24"/610mm 20"/508mm 26.75 lbs/12.13kg .73 UMC-VSL-STR 24"/610mm 19.8"/503mm 23.75 lbs/10.77kg .71 UMC-LUM-STR 24"/610mm 19.9"/505mm 25.75 lbs/11.68kg .73 SKIRTED BELL HOOD CONFIGURATION DIAMETER HEIGHT WEIGHT EPA UMC-SKB 24"/610mm 19.7"/500mm 20.5 lbs/9.3kg .90 UMC-WND-SKB 24"/610mm 23.9"/607mm 23.75 lbs/10.77kg 1.03 UMC-SR-SKB 24"/610mm 24.2"/615mm 27 lbs/12.25kg 1.05 UMC-VSL-SKB 24"/610mm 23.9"/607mm 24.25 lbs/11kg 1.03 UMC-LUM-SKB 24"/610mm 24.1"/612mm 26.25 lbs/11.9kg 1.05 Approved By: Project Name: Location: Date: 1919 Windsor Place Fort Worth, TX 76110 Specifications subject to change without notice. 800.633.8711 Fax: 817.735.4824 UCM-LUM-SKB www.wlslighting.com 40 Rev. 5/16 UMC SERIES DECORATIVE LED 41"in 41.0 41.1 in 1040mm 1040 mm 44.0"in 44.0 44.2 in 1120mm 1120 mm 41"in 41.0 41.1mm in 1040mm 1040 mm 99"in 229mm 229 mm 30"in 30.0 30.1 in 970mm 970 mm 66" in 152mm 152 mm SLA 16 Slips over 4 "/100mm O.D. pole. WT: 18 lbs. E P A: 2.88 60" in 60.0 60.0mm in 1525mm 1525 28.0" 28.0 in 28.5mm in 710mm 710 WMA 16 Backplate is 44 "/112 0mm x 6 "/150mm WT: 22 lbs. 32"inin 32.0 27.9 815mm 815 mm 32" 32.0 27.9inin 815mm 815 mm 19.5"in 19.5 19.4mm in 495mm 495 39" in 39.0 39.0mm in 990mm 990 SLA 16-2 Twin arms, slips over 4 "/100mm O.D. pole. WT: 28 lbs. E P A: 4.38 SLA 20B-2 Twin arms, slips over 4 " /100mm O.D. pole. WT: 24 lbs. E P A: 1.70 SLA 20B Slips over 4 " /100mm O.D. pole. WT: 14 lbs. E P A: 1.14 6 6" in 152mm 152 mm 5"5 in 127mm 127 mm 26" 26.0 in/660mm 660mm Straps painted to match fixture color. Strap painted to match fixture color. SLA 20D-2 Twin arms, slips over 4 " /100mm O.D. pole. WT: 21 lbs. E P A: 1.18 WMA 18 Backplate is 26 "/660mm x 6 "/150mm WT:18 lbs. 1.50" 1 1/2 in 38mm 38 mm 20.0"in 20.0 20.1 in 500mm WMA 8 Backplate is 12 "/305mm x 6 "/150mm WT: 10 lbs. WMA 12 Backplate is 12 "/305mm x 6 "/150mm WT: 12 lbs. SLA 18 Slips over 4 "/100mm O.D. pole. WT: 12 lbs. E P A: .85 Strap painted to match fixture color. 31" 31.0 in 31.0 in 790mm 790 mm 16" 16 in 406 mm 406mm 38"/965mm 38.0 in/965mm 42"/1070mm* 42.0 in/1070mm* 22.5"in 22.5 22.6 in 575mm 575 mm 66"in 152mm 152 mm WMA 24 Backplate is 26 "/660mm x 6 "/150mm WT: 12 lbs. 42"/1070mm 42.0 in/1070mm 56"/1422mm 56.0 in/1422mm* 10.5" 10.5 in/267mm 267mm 8 8" in 203mm 203 mm Straps painted to match fixture color. 40"/1015mm 40.0 in/1015mm 46.5"/1180mm* 46.5 in/1180mm* SLA 17-2 Twin arms, slips over 4"/100mm O.D. pole. WT : 24 lbs. E P A: 2.05 * 17(5)-2 Twin arms, slips over 5 " /127mm O.D. pole. SLA WT: 33 lbs. E P A: 2.90 Strap painted to match fixture color. 32"inin 32.0 34.0 815mm 815 mm 10.5 10.5" in/267mm 267mm 5.125" 5 1/8 in 130mm 130 mm 39" in 39.0 39.0mm in 990mm 990 SLA 20 Slips over 4 " /100mm O.D. pole. WT: 10 lbs. E P A: .70 SLA 18-2 Twin arms, slips over 4 "/100mm O.D. pole. WT: 22 lbs. E P A: 1.59 52"/1320mm 52.0 in/1320mm 68"/1727mm 68.0 in/1727mm* 26"/660mm 26.0 in/660mm 34"/864mm 34.0 in/864mm* SLA 24-2 Twin arms, slips over 4 " /100mm O.D. pole. WT: 14 lbs. E P A: 1.59 *SLA 24(5)-2 Twin arms, slips over 5 "/127mm pole. WT: 16 lbs. E P A: 1.81 19.519.5" in/495mm 495mm SLA 20-2 Twin arms, slips over 4 " /100mm O.D. pole. WT: 18 lbs. E P A: 1.25 40"/1015mm 40.0 in/1015mm 46.5"/1180mm* 46.5 in/1180mm* SLA 17 Slips over 4"/100mm O.D. pole. WT: 18 lbs. E P A: 1.50 *SLA 17(5) Slips over 5 " /127mm O.D. pole. WT: 24 lbs. E P A: 2.20 32" inin 32.0 34.0 815mm 815 mm 39" in 39.0 990mm 990 mm 31"in 31.0 31.0 in 787mm 787 mm 38"/965mm 38.0 in/965mm 42"/1070mm* 42.0 in/1070mm* 21"/535mm 21.0 in/535mm 27"/6850mm 27.0 in/685mm* SLA 24 Slips over 4 " /100mm O.D. pole. WT: 9 lbs. E P A:.85 *SLA 24(5) Slips over 5 "/127mm pole. WT: 11 lbs. E P A: 1.17 28"inin 28.0 24.75 710mm 710 mm 630 30" in 30.0 762mm 762 mm 27.0" 27.0 in 27.0mm in 670mm 670 500 mm 25.0" 25.0 in 25.2mm in 635mm 635 SLA 20A Slips over 4 " /100mm O.D. pole. WT: 15 lbs. E P A: 1.30 28"in 28.0 710mm 710 mm 6" 6 in 152mm 152 mm 48.1 in "/150mm SLA 20A-2 Twin arms, slips over 4 " /100mm O.D. pole. WT: 26 lbs. E P A: 1.94 6" 6 in 152mm 152 mm 24.0" 24.0 in 24.2 in 610mm 610 mm 5" 5 in 127mm 127 mm WMA 11 Backplate is 26 "/660mm x 6 WT: 10 lbs. 19.5" 19.5 in 495mm 19.4mm in 495 39"in 39.0 990mm 39.4mm in 990 6 6" in 152mm 152 mm 48.0"in 48.0 1220mm 1220 mm 39"in 39.0 39.0 in 990mm 990 mm 25" in 25.0 25.0mm in 635mm 635 SLA 20D Slips over 4 " /100mm O.D. pole. WT: 12 lbs. E P A: .75 6"in 6 152mm 152 mm 32" 32.0 27.9inin 4815mm 815 mm 26" 26.0 in/660mm 660mm 19.5" 19.5in 19.3 in 495mm 495 mm 39" in 39.0 39.0 in 990mm 990 mm 32" 32.0 27.9inin 815mm 815 mm 26"inin 26.0 26.1 660mm 660 mm SLA 20C-2 Twin arms, slips over 4 " /100mm O.D. pole. WT: 26 lbs. E P A: 1.91 19.5"in 19.5 19.4mm in 495mm 495 SLA 20C Slips over 4 " /100mm O.D. pole. WT: 15 lbs. E P A: 1.39 66"in 152mm 152 mm 36.0"in 36.0 36.1mm in 915mm 915 25.0"in 25.0 25.0mm in 635mm 635 WMA 17 Backplate is 36 "/915mm x 6 "/150mm WT: 15 lbs. 10"in 10.0 10.1 in mm 255mm 255 5" 5 in 127mm 127 mm 19.5" 19.5 17.6 in in 495mm 495 mm WMA 20 Backplate is 10 "/255mm x 8 "/205mm WT: 12 lbs. Approved By: Project Name: Location: Date: 1919 Windsor Place Fort Worth, TX 76110 Specifications subject to change without notice. 800.633.8711 Fax: 817.735.4824 www.wlslighting.com 40 Rev. 5/16