6200Series2015_snelsonSalesSheets 6/4/15 8:57 AM Page 1
6200 SERIES
ALUMINUM OR
STAINLESS STEEL
FLUORESCENT
HAZARDOUS
CLASS I, DIV. 2
GROUPS A, B, C & D
FEATURES & SPECIFICATIONS:
Construction
• Heavy-duty formed and welded housing and door frame of copper-free
aluminum or 304 stainless steel alloys (316 stainless steel optional)
• Ballast is replaceable from inside the fixture without removing
from mounting
• All external hardware is stainless steel to resist corrosion
• Heavy-duty safety cable harness welded at both ends
• One-piece high temperature propylene gasket provides a water-tight
seal between the door frame and housing
• Latching system allows for tool-free access to lamp chamber
(see inset below)
• Lens can be easily replaced in existing door frame
• 1⁄2” or 3⁄4” hub supplied on one end with option for hubs on both ends
for thru-wiring
• Standard finish is natural aluminum or unfinished stainless steel
Optical System
• Impact resistant polycarbonate lens is standard, other lenses available
• High reflectance die formed pre-coated aluminum reflector
Electrical System
• Ballasts are UL listed (UL 935) and CSA certified, Class P, high
power factor, Type 1 Outdoor, Type HL
• All electronic ballasts are universal voltage (120-277V, ≤10% THD)
operating at 50/60HZ standard
• Cold weather operation to -20°C (T8HO & T12HO) and 0°C (T8)
• Cold weather operation to 0°C with optional battery pack
• Lamps are supplied standard on both 2’ & 4’ models
SNELSON’S STAINLESS STEEL
TOOL-FREE LATCHING SYSTEM
LISTINGS:
• UL/CUL Listed (UL 844)
Class I, Div. 2
Groups A, B, C & D
• UL Listed (UL 1598A)
Marine/Outdoor use
• IP 66
• ABS Approved
• *55°C Ambient
*T12HO, T5 & T5HO
• 25°C EM
APPLICATIONS:
• Drilling rigs
• Offshore platforms
• Chemical plants
• Pharmaceutical plant
• Mining
• Shipyard facilities
• Coastal marine facilities
• Power generation plant
• Hazardous storage areas
• Marine shipping
• Cold storage facilities
• Corrosive atmospheres
OPTIONS:
• 316 Stainless steel housing
& door frame
• Emergency battery
(1 or 2 lamps, 350-575 lumens)
• Fusing (Non-Marine)
• Hubs on both ends
for thru wiring
• 4’ Stainless steel safety cable
• Various mounting options
SHIPPING WEIGHT:
• 20 LBS Aluminum
• 29 LBS Stainless Steel
6200Series2015_snelsonSalesSheets 6/4/15 8:57 AM Page 2
6200 SERIES FLUORESCENT
ORDERING INFORMATION
SERIES
CONSTRUCTION
LAMP CURRENT
& WATTAGE
LENGTH
VOLTAGE
62
A
800
4
A
SERIES
62 = 6200 SERIES
CONSTRUCTION
A = ALUMINUM
SS = STAINLESS STEEL (304)
LENGTH
2 = 2’
4 = 4’
LAMP CURRENT
& WATTAGE
800 = 800MA 60/35 WATT (T12HO LAMPS)
430 = 430MA 34/20 WATT (T12 LAMPS)
265 = 265MA 32/17 WATT (T8 LAMPS)
14 = 14W T5 (2’)
24H = 24W T5HO (2’)
28 = 28W T5 (4’)
44H = 44W T8HO (4’)
54H = 54W T5HO (4’)
VOLTAGE
A = MULTI-VOLT
(120V-277V, 50HZ/60HZ)
E = 12 VOLT DC
H = 347V/60HZ
**Multi-volt ballast
(“A” option above)
operates at 220V/50HZ
OPTIONS
OPTIONS
C = 1/2” HUB ONE END
D = 1/2” HUB EACH END
E = 3/4” HUB ONE END
EM = EMERGENCY
BATTERY
F = 3/4” HUB EACH END
316 = 316 STAINLESS
STEEL
NY = NYLOC NUTS
(HUB MATERIAL METALLIC UNLESS OTHERWISE NOTED)
MOUNTING OPTIONS
4315
5030
5032
5037
5040
ADJUSTABLE MOUNTING KIT
5022
RELATED PRODUCTS
5200 SERIES
CSA LABEL OPTIONAL
7200 SERIES
UL LISTED, CLASS I, DIV. 1
PLUGS AND RECEPTACLES
LEXAN (NON LISTED)
DIMENSIONS
SNELSON OILFIELD LIGHTING
5910 WEST BY NORTHWEST #100
HOUSTON, TX 77040
www.snelsonlights.com
713-937-3600 Phone
866-563-2832 Phone
713-937-3604 Fax