913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
Electrical Specifications
Max.
Output
Power
(W)
Output
Voltage
(V)
Output
Current
(A)
39
20-56
200700mA
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Tcase
Max
Max
Input
Current
at 120V
(A)
Max.
Input
Power
(W)
Inrush
Current
(Apk -50% µ
s)
Max.
THD
(%)
Min.
Power
Factor
Surge
Protection
(KV)
Weight
(Lbs)
75°C
0.34
44
74/120
20
>0.9
2.5
0.7
Wiring/Connection Diagram
Dimming
Method
Dimming
Range
(%)
0-10V
10% ~ 100%
Input, Output and for 1-10V Dimming, please use leadwires18AWG (0.78mm²) 105C/600V solid copper.
Case Length(F4)
Case Height(F2)
Case Width(F3)
Mounting Length(F1)
Stud Width(G1)
Overall Length
in. (mm)
4.2 (106.7)
1.18 (30.0)
3.0 (76.4)
4.55(116.6)
2.0 (50.8)
9.54 (240.5)
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
Envir.
Protection
Rating
UL Dry &
Damp
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Installation & Application Notes:
Section I – Physical Characteristics
1.1
LED Driver shall be installed inside an electrical enclosure.
1.2
Wiring inside electrical enclosure shall comply with 600V/105°C rating or higher.
Section II – Performance
2.1
LED Driver is certified by UL Class2 for use in a dry or damp location.
2.2
LED Driver has Class A sound rating.
2.3
LED Driver has a minimum operating ambient temperature of -40°C.
2.4
LED Driver has a life expectancy of 50,000 hours at Tcase of ≤ 70°C.
2.5
LED Driver has a life expectancy of 100,000 hours at Tcase of ≤ 62°C.
2.6
LED Driver has a maximum self rise of 25°C in open air without heat sink.
2.7
LED Driver maximum allowable case temperature is 75°C – see product label for measurement location
2.8
LED Driver reduces output power to LEDs if maximum allowable case temperature is exceeded.
2.9
LED Driver has a failure rate ≤ 0.01% per 1,000 hours at Tcase ≤ 70°C.
2.10
LED Driver has a failure rate of 0.01% - 0.02% per 1,000 hours at Tcase of 70°C - 80°C.
2.11
LED Driver tolerates sustained open circuit and short circuit output conditions without damage.
2.12
LED Driver complies with FCC rules and regulations, as per Title 47 CFR Part 15 Non-Consumer (Class A).
Section III – UL Conditions of Acceptability (File E321253)
Conditions of Acceptability 3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
The maximum available output parameters of the driver met the Class 2 Inherently limited parameters.
Deleted
The primary and the secondary terminal blocks are R/C (XCFR2/XCFR8) suitable for field wiring.
The Driver is suitable for use in “Dry” and “Damp” locations.
When the driver is installed in the end-use application, the measured case temperature at the (Tc) location specified
on the marking label must not exceed 77.6 ºC.
For Cat. No. 9137 012 13402 temperature test was conducted at a Tc of 90 ºC and is in compliance with UL 8750
requirements.
The driver shall be installed in compliance with the requirements of the end
product standard.
The maximum measured leakage current using leakage current tester by Simpson Model 229-2 was 0.62 mA for
model 913701213402. The maximum measured leakage current was 0.45 MIU using a Simpson 228 on model LEDINTA-0520C-60DB.
The “Fan” and the “Dimming” circuits are part of the Class 2 output circuit.
The case of the driver must be connected to Earth ground when installed in the end-use application.
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Adjustable Output Current Info (200mA-700mA):
Relation between output current and Rset (+/- 10% variation)
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Variation of output current level with RNTC:
Efficiency of the driver VS Input Power@ Constant LED Voltage:
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
0-10V Dimming Info:
Inrush Current Info:
Measured @400VDC
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Compatible Dimmers (Please verify with vendors):
Failure Rate Info:
1. <0.01% per 1kHr @<= Tcase 60˚C
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
913701213402
Brand Name
Description
Input Voltage
Input Frequency
RoHS
Approbations
Status
Revision History:
Rev No.
Date
1.1
2.1
3.1
4.1
5.1
11/17/2011
01/24/2012
05/03/2012
05/03/2012
06/02/2012
Description
*Remove graph “Failure rate vs. Tcase
* Add Envir. Protection Rating
*Remove Min .Output Power (W)
* Add Approbations: UL,CSA
*Update COA
XITANIUM
Xitanium .2-.7A 56V 0-10V Dim
120-277V
50/60Hz
Yes
UL,CSA
Active
Approval
Remarks
N.T.
N.T.
N.T.
N.T.
N.T.
Revised 06/02/2012
PHILIPS LIGHTING.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: 800-322-2086 · Fax: 888-423-1882 · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886